NA
NA
______________________________________________________________________________________________
MATRIX COMSEC PVT. LTD. Page 1 of 2
Product Software Release
V1 July12
Following two parameters are added in the Jeeves page “SIMADO GFX44 Parameters”
1.Remove country code from CLIP received on Mobile Port
2.Country Code
Note:
In case where user want to retain its old configuration file, following steps should be done
1. Use New Jeeves.[V1R20]
2. Open Jeeves and Press Full/Fast download. This will get all user configuration value from old firmware
and set to New Jeeves V1R20. Save this in new configuration file [.gfx4420] of V1R20. [Doing this
new parameters added in this version will be set to default and command for these will get rejected.]
3. Now load firmware with new version V1R20. And use saved configuration file of [.gfx4420] to
Upload.
Simado Gfx44 Jeeves V1R20 will work with SIMADO GFX44 V1R20 firmware only. [With older version of
Jeeves or firmware is used, newly added command will get rejected]
______________________________________________________________________________________________
MATRIX COMSEC PVT. LTD. Page 2 of 2