Answer-0.2
Question-4.Full form of VVVF control
1. VAR Variable Voltage Frequency
2. Variable Voltage Var able Frequency
3. Variable Voltage VAR Frequency
4. Variable VAR Voltage Frequency
Answer-Brown-out reset
Question-6.Pneumatic is stem usually do not exceed
1. 4 to 5
2. 1 to 2
3. 2 to 3 hp
4. 1 hp
Answer –1 hp
Question-7.For the protect on of DC series motor, commonly used starter is
1. Two point starter
2. Three point starter
3. Four point starter
4. None of these
Answer-None of these
Question-12..A DC servo motor
1. Uses a tachometer for speed feedback
2. Uses a var able DC voltage for speed control
3. Can provide precise position control
4. All of these
Answer-All of these
Question-13.One of the basic requirements of a servomotor is that it must produce high torque
at all
1. Speeds
2. Frequencies
3. Loads
4. Voltages
Answer-Speeds
Question-14.A low- contrast picture in which white seems flat and lacking in detail suggest
1. Excessive gamma
2. High gain in the amplifier
3. Low beam current
4. Insufficient scanning width
Answer-Erlangs
Question-17.The R, G, and B video drive controls are set for in the picture
1. Green
2. Dark gray
3. Black
4. White
Answer-White
Question-18.The DC range of solenoids in pneumatic system
1. 110V and 220V
2. None of these
3. 12V and 24V
4. Both 1 & 2
Answer-All of these
Question-20.The PLC is used in
1. Automated assembly equipment
2. Machine tools
3. Mouiding and extrusion machines
4. All of these
Answer-All of these
Question-21.The direct on of rotation of a D.C. series motor can be changed by
1. Either of Interchanging supply terminals and Interchanging field terminals
2. Interchanging field terminals
3. None of these
4. Interchanging supply terminals
Answer-All of these
Question-23.The consideration involved n the select on of the type of electric drive for a
particular application
depends on
1. Speed control range and ts nature
2. Starting torque
3. All of these
4. Environmental conditions
Answer-All of these
Question-24.The execution speed of instruction in PIC especially while operating at the max
mum value of
clock rate is
1. 0.4 s
2. 0.2 s
3. 0.1 s
4. 0.8 s
Answer-0.2 s
Question-25.The gamma effects of the picture tube
1. Dullness
2. Contrast
3. Either the brightness or contrast
4. Brightness
Answer-Contrast