SMT - 200
Pourable Crack Sealant
1. PRODUCT NAME water-based crack sealant Estimating Material Requirements:
Pourable Crack Sealant containing less than 150 grams per Coverage is dependent upon
liter volatile organic content (VOC). depth and width of cracks.
2. MANUFACTURER Typically, one gallon of Pourable
ThorWorks Industries, Inc. Physical/Chemical Properties: Crack Filler will fill approximately 75-
2520 S. Campbell St. Pourable Crack Sealant meets the 150 feet of cracks.
Sandusky, OH 44870 following material requirements
Phone: 800-395-7325 when tested in accordance with Precautions:
Fax: 419-626-5477 ASTM D140, ASTM D466, ASTM D529, Both sur face and ambient
www.thorworks.com ASTM D2939, and ASTM D244 temperature shall be a minimum
procedures. (see chart below) of 50°F. Temperature shall not drop
Additional Plant Locations: below 50°F within a 24 hour period
SealMaster has a nationwide 5. INSTALLATION following application. Keep Out
network of manufacturing and Cracks must be cleaned of all dirt, Of Reach Of Children. Do not store
distribution facilities. debris, and vegetation prior to unopened containers in freezing
application of crack sealant. temperatures.
Phone 1-800-395-7325 or visit
website at www.sealmaster.net Methods: Pourable Crack Sealant 6. AVAILABILITY & COST
to find the location near you. may be applied directly from
container (one gallon jug with pour Availability: Pourable Crack
3. PRODUCT DESCRIPTION & spout), pour pot, or suitable Sealant is supported by a national
BENEFITS mechanized pumping equipment. network of SealMaster facilities
Pourable Crack Sealant is a one It is desirable to squeegee material along with a national network of
component rubberized cold- flush to adjoining pavement professional applicators.