Each graphical symbol is identified by a reference number and contains a title (in English and French), a graphical representation in
GIF and vectorized PDF format, and some additional data as applicable. Various search and navigation facilities allow for easy
retrieval of graphical symbols.
Subscriptions
Customers have the possibility to subscribe to the joint IEC and ISO collection of symbols or to each respective organization's symbols
only.
IEC National Committees and ISO Member Bodies should indicate the names of the staff members to be authorized and the
username used for accessing documents on the IEC or ISO web site respectively.
TC/SC officers should indicate their position with respect to a given TC/SC (chair, secretary, convenor) and the username used for
accessing documents on the IEC or ISO web site respectively.
Localized versions
In addition to the international standard IEC 60417 maintained by IEC/TC 3, subcommittee SC 3C, IEC also hosts localized versions
of IEC 60417 maintained under the responsibility of the respective National Committee. The following localized version is currently
available:
Japanese
Please send any queries or comments to the IEC Customer Service Centre or to ISO Customer Services.
Web page created 2019-06-04 Copyright © 2019 IEC, ISO, Geneva, Switzerland. All rights reserved
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/welcome?OpenPage[2019-06-04 12:56:35]
IEC/ISO Graphical Symbols for Use on Equipment
International Electrotechnical
This is a preview - click here to buy the full publication
Search Logout
Commission List
Thumbnails
Grid
Full
International Organization for
Standardization
Graphical Symbols for Use on Equipment
Home Introduction
Introduction The database is organized as a set of "data sheets" describing the graphical symbols and their
General description attributes. Please click on "General description" on the left panel to see how the database is
structured and how to use graphical symbols.
Symbols by:
IEC 60417 is used as a reference by the following IEC member countries:
Symbol ID
Name (IEC 60417) Austria, Belgium, Canada, Cyprus, Czech Republic, Denmark, Finland, France, Germany,
Ireland, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Spain,
Name (ISO 7000) Sweden, Switzerland, Ukraine, United Kingdom
Keywords
Languages
Shape
Function The database is bilingual with all symbol data available in English and French (not always true for
ISO 7000 graphical symbols). While viewing a symbol data sheet you can switch back and forth
Application
between the two languages.
TC/SC
Publication Links
Date of release
All items in blue represent links to other elements or to specific action.
IEC draft status
Finding a symbol
Advanced Search
The database provides two methods for finding a symbol:
Symbols are categorized by symbol ID, name, keyword, shape, function, application,
TC/SC, publication and status. Some of the views are presently not available for ISO 7000
graphical symbols.
Snapshots
Snapshots of the database contents are made available for reference purposes in PDF format.
Please click on "Snapshots" in the left panel for further information.
The maintenance process for any changes to this joint IEC 60417 and ISO 7000 database, either
for the inclusion of a new graphical symbol or a change to existing graphical symbols should be
initiated by a change request (CR). Details are defined in the ISO/IEC Directives (IEC specific
procedures, Annex SL for IEC 60417 symbols, and ISO specific procedures, Annex ST for ISO
7000 symbols).
In drafting technical content that may be included in the CR, please refer to IEC 80416-1, Basic
principles for graphical symbols for use on equipment – Part 1: Creation of graphical symbols for
registration and ISO 80416-2: Basic principles for graphical symbols for use on equipment – Part
2: Form and use of arrows. The most recent guidance for the wording of the description for a
symbol original can be found on both the IEC TC 3/SC 3C and ISO TC 145/SC 3 website.
Proposers of such change requests can click here to send an e-mail to the secretaries of IEC SC
3C and ISO TC 145/SC 3 who are responsible for the maintenance of IEC 60417 and ISO 7000,
respectively.
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/$enHome?OpenForm[2019-06-04 12:58:35]
IEC/ISO Graphical Symbols for Use on Equipment
International Electrotechnical
This is a preview - click here to buy the full publication
Search Logout
Commission List
Thumbnails
Grid
Full
International Organization for
Standardization
Graphical Symbols for Use on Equipment
Introduction A graphical symbol is a visually perceptible figure used to transmit information independently of
General description language. The graphical symbols for use on equipment are used for a wide range of purposes.
For such graphical symbols, consistency in design of families of symbols used in one location or
on similar equipment is an important issue, as is legibility when these symbols are reduced to
Symbols by:
small dimensions. Thus, there have been common provisions among areas covered by IEC and
Symbol ID ISO on basic principles for graphical symbols for use on equipment to ensure visual clarity, to
Name (IEC 60417) maintain consistency and thereby to improve recognition (see IEC 80416-1 and ISO 80416-2).
Each graphical symbol carries a registration number (symbol ID) and a name in English and
French, together with a graphical representation in GIF or PNG and in vectorized PDF format.
There are also several optional fields. Below is a full listing of all the database fields. Some of
them do not apply presently to ISO 7000 graphical symbols.
- Symbol ID
- Name
- Graphical representation in GIF or PNG format
- Graphical representation in vectorized PDF format
- Status
- Product area
- Description
- Notes
- Date of release
- Date of withdrawal
- Example of application class
- Function class
- Shape class
- Keywords
- Publication reference
- Relevant TCs and publications
- Replacing
- Replaced by
- Change requests
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/$Description?OpenForm[2019-06-04 12:59:19]
IEC/ISO Graphical Symbols for Use on Equipment
The graphical
This is a symbols
preview - are
clickintended forthe
here to buy use
fullon equipment; generally speaking any kind of
publication
equipment. The field "Example of application class" can be used to indicate more specifically for
which type of equipment a graphical symbol is intended.
Guidelines for the application of graphical symbols for use on equipment are in IEC 80416-3.
Supplementary guidelines for the adaptation of graphical symbols for use on screens and displays
(icons) are in ISO 80416-4.
Web page created 2019-06-04 Copyright © 2019 IEC, ISO, Geneva, Switzerland. All rights reserved
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/$Description?OpenForm[2019-06-04 12:59:19]
IEC/ISO Graphical Symbols for Use on Equipment
IEC/ISO Graphical Symbols for Use on Equipment - Overview 2019-06-04 / 4876 symbols
This is a preview - click here to buy the full publication
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
0097: 0098: 0099: 0100: 0101: 0102: 0105: 0106:
Rear window wiper This isProvision
Rear window washer and Rear window washer a preview
for the -disabled
click here to buyvessel
Tank, general; the full publication
Reservoir Vessel with internals Vessel with trays
wiper or handicapped persons
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
Electric energy Pressure measurement Valve; shut-off element Embossing Flanged bobbing; beam Unleaded fuel Parking brake Brake failure; brake
This is a preview - click here to buy the full publication system malfunction
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
This is a preview - click here to buy the full publication
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
This is a preview - click here to buy the full publication
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
This is a preview - click here to buy the full publication
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
This is a preview - click here to buy the full publication
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
element
This is a preview - click here to buy the full publication
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
Raise fork Tilt forward Tilt rearward Extend reach Retract reach Side shift to left Side shift to right Fork spread open
This is a preview - click here to buy the full publication
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
Bridge to right Canopy out Canopy in Open roller curtain Close roller curtain Right stabilizer, down Right stabilizer, up Extend stabilizers,
This is a preview - click here to buy the full publication general
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
1388: 1389: 1390: 1391: 1392: 1393: 1394: 1395A:
Engine stop Engine rotational speed This isFuel
Heat exchanger; coolant a preview
system - click here to buy
Fuel pressure the full publication
Fuel filter Fuel temperature Fuel shut-off
(revolutions per minute) fluid radiator; radiator failure/malfunction
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
lower raise out dump (rollback)
This is a preview - click here to buy the full publication
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
Fuel and oil mixture Chain-oil fill; oil pump Heated handle, Engine, manual start Malfunction, general; failure Malfunction, general; failure Intake air Exhaust gas
This is a preview - click here to buy the full publication
temperature control
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
1712: 1713: 1714: 1715: 1716: 1717: 1718: 1719:
Tree harvester/feller Tree harvester/feller This isFixed
Tree harvester/feller a preview - click
boom felling head, here to buy
Fixed boom the
felling fullturn
head, publication
Felling head Felling head, tilt up Felling head, tilt down
buncher, boom swing buncher, boom, swing left buncher, boom, swing turn left right
right
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
This is a preview - click here to buy the full publication
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
This is a preview - click here to buy the full publication
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
ripper/scarifier, hold
This is a preview - click here to buy the full publication
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
ground speed speed harvester ground speed rotation close (side view of machine)
This is a preview - click here to buy the full publication
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
accessories failure/malfunction
This is a preview - click here to buy the full publication
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
coolant fan air filter emission filter air preheat temperature level failure
This is a preview - click here to buy the full publication
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
Cupholder Exterior rear view mirror, Motion sensor off or not Stacker blade Stacker blade, lower Stacker blade, raise Choke, open Choke, closed
power folding, vertical type available This is a preview - click here to buy the full publication
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
Steering wheel lock Forward collision warning Lane departure warning Protection against welding Manual activation control Fire alarm Tow point Rope/cable, breaking
system (FCWS) system (LDWS) This is a preview - click here to buy the full
hazards publication
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
thermal disinfection and rotary dental impression materials
This isinstruments
a preview - click here to buy the full publication
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
2884: 2885: 2886: 2887: 2888: 2889: 2890: 2891:
Engine speed, slow; low Interrupted feed This isTarry;
Two-hand operation a preview
dwell - click here to buy
Jaw (gear) clutchthe full publication
Workpiece, finished part Workpiece not present Workpiece chuck,
engine speed (missed) rotational
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
This is a preview - click here to buy the full publication
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
Open here Flat drying Ironing, general Manufacturer In vitro diagnostic (IVD) Sterile fluid path Washing, general Washing, normal
This is a preview - click here
device to buy the full publication
for performance process, maximum 30
evaluation Celsius
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
3173: 3174: 3175: 3176: 3177: 3178: 3179: 3180:
Sugar cane loading This isSpray
Sugar cane loader, boom, Spray solution tank, a preview - click here
solution tank, to buy
Spray nozzle the full
pressure publication
Hours sprayed Round bale Bale netting
equipment raise agitator aerator
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
This is a preview - click here to buy the full publication
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
This is a preview - click here to buy the full publication
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
This is a preview - click here to buy the full publication
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
beam, move up
This is a preview - click here to buy the full publication
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
functional grounding (US) ground direction
This is a preview - click here to buy the full publication
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
This is a preview - click here to buy the full publication
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
This is a preview - click here to buy the full publication
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
This is a preview - click here to buy the full publication
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
Priority Direct link Omnibus link Normal operation Reserve operation Brightness and contrast Sound muting Spatial sound effect
This is a preview - click here to buy the full publication
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
Bell cancel Bell, cancel Bell, cancel temporary Bell, cancel temporary Bell, cancel affirmatively Bell, temporary cancel Zone focus, very short Zone focus, short
acknowledged; This isacknowledged;
a previewtemporary
- click here to buy the full publication
acknowledged; affirmatively acknowledged; distance distance
acknowledged acknowledged acknowledged temporarily acknowledged
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
This is a preview - click here to buy the full publication
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
Electrosurgery, bipolar Suitable for use in the Suitable for use in the Displayed image, Displayed image, reduced Panning function Enlargement of region of Image interchange
coagulation mode tropics subtropics This isenlarged
a preview - click here to buy the full publication interest
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
picture mode horizontal zoom mode zoom mode in/out enlarge mode water suction cleaning implantable cardioverter
This is a preview - click here to buy the full publication defibrillator
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
Variability, rotational Electronic image, cancel Mouse, left click Electronic programme Inlet for liquid; input for liquid Outlet for liquid; output for Inlet for gas; input for gas Outlet for gas; output for
adjustment with maximum This isguide;
a preview
EPG - click here to buy the full publication
liquid gas
step
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
This is a preview - click here to buy the full publication
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
mode; switch mode power receive electrode; two-electrode GDTelectrode; three-electrode GDT source light source
supply unit; SMPS This is a preview - click here to buy the full publication
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
This is a preview - click here to buy the full publication
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]
IEC/ISO Graphical Symbols for Use on Equipment
This is a preview - click here to buy the full publication
http://www.graphical-symbols.info/graphical-symbols/equipment/db1.nsf/OverviewFull?openform[2019-06-04 13:07:46]