Form Work
Form Work
o It should be carefully selected for required o Permukaan dan pelapis harus rata dan licin sehingga
menghasilkan concrete surface yang diinginkan dan
finish surface and linings to produce the desired
Menekan temuan Kwalitas cetakan.
concrete surface.
o Bekisting/formwork harus tahan terhadap Pressure
o Formwork need to withstand the pressure of atau Tekanan Fresh Concrete dan Working Load, dan
tidak boleh terjadi distorsi atau defleksi (berubah)
fresh concrete and working loads and should not
posisi selama proses pencetakan concrete.
distort or deflect from their position during the
o Permukaan Bekisting/formwork tidak boleh
concrete placement operation.
mengakibatkan merusak pada tepi atau permukaan
o The formwork must not damage the concrete concrete saat pengeringan; atau juga disaat proses
dismantling formwork.
edge or surface; or themselves during removal
from structure. o Cetakan Bekisting harus terhubung dengan kencang
untuk meminimalisir celah pada sambungan Bekisting
o Panels of the formwork should be tightly dan mencegah terjadinya kebocoran.
connected to minimize gap at the formwork
connection to prevent leakage of cement paste.
Requirements of
sehingga dapat diangkat dan diangkut dengan mudah
dari satu lokasi kerja ke lokasi lainnya.
o It should be dismantled and moved as easily as Bekisting harus dirancang sedemikian rupa sehingga
possible. pas dan melekat dengan mudah.