Quantities
Castillo, Michael Rey
X – Pascal
Purpose:
to know the essential configuration needed to make a circuit
to know how normal voltage drops in an operating circuit
to know the importance of continuity to a circuit
to know the working definitions of “open” and “short” circuits
to know how to use a terminal strip
to understand the flow and direction of the current in a circuit
Materials:
9-volt battery
6-volt battery
3-volt battery
9-volt incandescent lamp
6-volt incandescent lamp
3-volt incandescent lamp
3 pairs of jumper wires
Board
Procedures:
1. In a pair of jumper wires, attach a jumper wire to the battery and attach one jumper wire to
the incandescent lamp. Do not connect both together.
2. There are three types of batteries that match with only a specific type of incandescent lamp.
In the disarrayed jumper wires on the board, connect the appropriate battery to the
incandescent lamp to light it not too bright that it may cause too much flow of the current and
damage the lamp or too dull because the voltage is too low.
Diagram: