EL731 SERIES
AC/DC Sensitive Earth-Leakage Relay
Description
The EL731 is a microprocessor-based AC/DC Sensitive
Earth-Leakage Relay that offers complete coverage for all
frequencies from 0 to 6,000 Hz. Two CTs are required for the
entire frequency range, or one CT can be used for only low- or
high-frequency detection. An RTD/PTC sensor input allows
over-temperature protection for a motor or drive. The EL731
offers metering, password-protected alarm and trip settings
and optional network communications. It is primarily used to
add low-level ground-fault protection to variable-speed drives,
Simplified Circuit Diagram and to dc circuits.
CT1 A CT2 A
A CT1 A
GROUNDED +
AC SUPPLY B GROUNDED
DC SUPPLY –
C
AC Mode DC Mode
EL731 SERIES
AC/DC Sensitive Earth-Leakage Relay
Adjustable pickup (30-5,000 mA) Adjustable trip setting provides a wide range of low-level protection and system coordination
Frequency range (0-90 Hz, 20-6,000 Hz) Operate in either AC or DC mode or both. Use single or combined ranges. Separate metering
Analog output (4-20 mA) Connect to DCS. Allows connection to an optional meter (PGA-0520) or control system
Adjustable time delay Adjustable trip delay for quick protection and system coordination
Alarm and trip settings Detect a deteriorating condition before damage occurs