Page: 1/10
BASF Safety data sheet
Date / Revised: 15.07.2019 Version: 5.0
Product: ELASTOPAN* CS 9530 C-A
(30187478/SDS_GEN_VN/EN)
Date of print 16.07.2019
Manufacturer/supplier:
BASF Polyurethanes GmbH
Postfach 1140
49440 Lemfoerde, GERMANY
Telephone: +49 5443 12-2121
Telefax number: +49 5443 12-2090
E-mail address: Product-Safety-Polyurethanes@basf.com
Emergency information:
International emergency number:
Telephone: +49 180 2273-112
2. Hazard identification
Pictogram:
Signal Word:
Warning
Page: 2/10
BASF Safety data sheet
Date / Revised: 15.07.2019 Version: 5.0
Product: ELASTOPAN* CS 9530 C-A
(30187478/SDS_GEN_VN/EN)
Date of print 16.07.2019
Hazard Statement:
H319 Causes serious eye irritation.
3. Composition/information on ingredients
Chemical nature
Hazardous ingredients
Diethanolamine
Content (W/W): >= 1 % - < 3 % Acute Tox.: Cat. 4 (oral)
CAS Number: 111-42-2 Skin Corr./Irrit.: Cat. 2
Eye Dam./Irrit.: Cat. 1
Repr.: Cat. 2 (fertility, unborn child)
STOT RE (Blood, Liver, Kidney, Central
nervous system): Cat. 2 (oral)
4. First-Aid Measures
General advice:
Remove contaminated clothing.
If inhaled:
Keep patient calm, remove to fresh air, seek medical attention.
On skin contact:
Wash thoroughly with soap and water.
On ingestion:
Immediately rinse mouth and then drink 200-300 ml of water, seek medical attention.
Note to physician:
Symptoms: Eye irritation
Page: 3/10
BASF Safety data sheet
Date / Revised: 15.07.2019 Version: 5.0
Product: ELASTOPAN* CS 9530 C-A
(30187478/SDS_GEN_VN/EN)
Date of print 16.07.2019
Hazards: Symptoms can appear later.
Treatment: Treat according to symptoms (decontamination, vital functions), no known specific
antidote.
5. Fire-Fighting Measures
Specific hazards:
carbon monoxide, carbon dioxide, nitrogen oxides
The substances/groups of substances mentioned can be released in case of fire.
Further information:
Dispose of fire debris and contaminated extinguishing water in accordance with official regulations.
Personal precautions:
Use personal protective clothing.
Environmental precautions:
Do not empty into drains. Do not discharge into the subsoil/soil.
Handling
Ensure thorough ventilation of stores and work areas.
Storage
Segregate from foods and animal feeds. Segregate from acids. Segregate from oxidants.
Suitable materials for containers: Carbon steel (Iron), High density polyethylene (HDPE), Low
density polyethylene (LDPE), tinned carbon steel (Tinplate), Stainless steel 1.4301 (V2)
Further information on storage conditions: Containers should be stored tightly sealed in a dry place.
Page: 4/10
BASF Safety data sheet
Date / Revised: 15.07.2019 Version: 5.0
Product: ELASTOPAN* CS 9530 C-A
(30187478/SDS_GEN_VN/EN)
Date of print 16.07.2019
2,2'-iminodiethanol, 111-42-2;
TWA value 1 mg/m3 (ACGIHTLV), Inhalable fraction and vapor
Skin Designation (ACGIHTLV), Inhalable fraction and vapor
The substance can be absorbed through the skin.
Hand protection:
Suitable chemical resistant safety gloves (EN 374) also with prolonged, direct contact
(Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to
EN 374): E.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), butyl rubber (0.7 mm) etc.
Eye protection:
Safety glasses with side-shields (frame goggles) (e.g. EN 166)
Body protection:
Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting
boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case
of dust).
Form: liquid
Colour: yellowish
Odour: amine-like
Odour threshold: not applicable
pH value: 7-9
(20 °C)
(30187478/SDS_GEN_VN/EN)
Date of print 16.07.2019
Evaporation rate:
Value can be approximated from
Henry's Law Constant or vapor
pressure.
Viscosity, dynamic:
not determined
Other Information:
If necessary, information on other physical and chemical parameters is indicated in this section.
(30187478/SDS_GEN_VN/EN)
Date of print 16.07.2019
Substances to avoid:
acids, oxidizing agents, isocyanates
Hazardous reactions:
No hazardous reactions if stored and handled as prescribed/indicated.
The product is chemically stable.
Acute toxicity
Irritation
Respiratory/Skin sensitization
Assessment of sensitization:
The chemical structure does not suggest a sensitizing effect.
(30187478/SDS_GEN_VN/EN)
Date of print 16.07.2019
Experimental/calculated data:
Guinea pig maximization test guinea pig: Non-sensitizing. (OECD Guideline 406)
----------------------------------
Assessment of mutagenicity:
The chemical structure does not suggest a specific alert for such an effect.
Carcinogenicity
Assessment of carcinogenicity:
The chemical structure does not suggest a specific alert for such an effect.
Reproductive toxicity
Developmental toxicity
Assessment of teratogenicity:
The chemical structure does not suggest a specific alert for such an effect.
Repeated dose toxicity and Specific target organ toxicity (repeated exposure)
Aspiration hazard
The product has not been tested. The statement has been derived from substances/products of a
similar structure or composition.
Ecotoxicity
(30187478/SDS_GEN_VN/EN)
Date of print 16.07.2019
There is a high probability that the product is not acutely harmful to aquatic organisms.
LC50 (96 h) 1,460 mg/l, Pimephales promelas (Fish test acute, static)
Nominal concentration. Literature data.
----------------------------------
Mobility
Elimination information:
Poorly biodegradable.
Bioaccumulation potential
Additional information
Contaminated packaging:
Contaminated packaging should be emptied as far as possible; then it can be passed on for
recycling after being thoroughly cleaned.
Page: 9/10
BASF Safety data sheet
Date / Revised: 15.07.2019 Version: 5.0
Product: ELASTOPAN* CS 9530 C-A
(30187478/SDS_GEN_VN/EN)
Date of print 16.07.2019
14. Transport Information
Domestic transport:
Not classified as a dangerous good under transport regulations
Sea transport
IMDG
Not classified as a dangerous good under transport regulations
Air transport
IATA/ICAO
Not classified as a dangerous good under transport regulations
For the classification of the mixture the following methods have been applied: extrapolation on the
concentration levels of the hazardous substances, on basis of test results and after evaluation of
experts.
The methodologies used are mentioned at the respective test results.
Other regulations
If it is intended to use materials for the manufacture of consumer goods (e. g. products which will
come into contact with foodstuffs or with the skin, toys) or medical products, national and
international regulations have to be observed. Where no regulations exist, consumer goods or
medical products must at least comply with European legislation. We recommend contacting our
Sales and our Product Safety departments.
If other regulatory information applies that is not already provided elsewhere in this safety data
sheet, then it is described in this subsection.
For the classification of the mixture the following methods have been applied: extrapolation on the
concentration levels of the hazardous substances, on basis of test results and after evaluation of
experts.
The methodologies used are mentioned at the respective test results.
Vertical lines in the left hand margin indicate an amendment from the previous version.
Page: 10/10
BASF Safety data sheet
Date / Revised: 15.07.2019 Version: 5.0
Product: ELASTOPAN* CS 9530 C-A
(30187478/SDS_GEN_VN/EN)
Date of print 16.07.2019
The data contained in this safety data sheet are based on our current knowledge and experience and
describe the product only with regard to safety requirements. This safety data sheet is neither a
Certificate of Analysis (CoA) nor technical data sheet and shall not be mistaken for a specification
agreement. Identified uses in this safety data sheet do neither represent an agreement on the
corresponding contractual quality of the substance/mixture nor a contractually designated use. It is the
responsibility of the recipient of the product to ensure any proprietary rights and existing laws and
legislation are observed.