BESAN GRINDING PLANTBESAN GRINDING PLANT
OPERATING PRINCIPLE
Besan Grinding Plant is economical unit specially designed for Gram dal for time saving operation. The Feed
hopper is suitable to store gram dal. Below the feed hopper Vibratory Feeder is fited. The Vibratory feeder is
regulates'ts speed by speed controller to regulate feed of gram dal before entering info Besan Grinding Mill
The Besan grinding mills technically designed to grind gram dal in one operation only, The grinding chamber is
fitted with serrated fine liners and main shaft assembly is fitted with bar type Hammer which is fixed with carbide
tip for long life of hammer. The inbuilt Air Blower is specially designed to suck all Beson without getting high
temperature. The mixture of air and Besan is delivering to cyclone separator through the air ight pipe line. The
eyclone separator is efficiently separate air and Besan.
The besan is geting collected through Rotary AirLock valve at the bottom with dust free operation. The diny airs
separated from top of the cyclone separator and passes though the pipe into the Pulse Jet Dust Collector.
The Pulse Jet Dust Collectors fitted with non woven oil repellent and moisture repellent air filer whichis separote
the dust and clean ar. The clean airs passes away into the atmosphere from the top ofthe Pulse jet dust collector.
‘STANDARD SUPPLY
Besan Grinding Plant is complete with Feed Hopper along with Vibratory Feeder, Beson Grinding Mill with inbuilt
air blower assembly, mounting frame for Mill and Electric Motor, Set of Slide rail for Motor, Set of V' bel, Set of
Anti Vibration mounting pads, Set of safely uard for drive accessories, Set of pipe line, Cyclone separator with
‘mounting stand, Set of Rotary Airlock valve, Set of PVC Pipe line for Pulse jet dust collector and Set of Pulse Jet
dustcollector assembly
Necessary but Optional Supply (At Extra Cost)
1. Electric Motor for Mill
2, Electrical Panel Box with starter DOL / Stor Delta & ampere meter forload indicator.
3. Air Compressor
Model No. | Rotor Dia] Chamber | Recommended Matod ‘Over Dim In Meter Capacity Ka/he
(ire) | Width fin men)| HP RPM _ | Length (| Width (W) | Height (A)
ASMMSO5 | 250 130. 3 2880 | 3.0 2.0 3.0 50-60
‘ASM:MSTO | 300 200 To_|_2880_| 4.0 3.0 4.0 | 100-120
‘ASMMS20 | 450, 220 20_| 2880_| 5.0 40 40 | 200-250
‘ASM-MS40 | 600 360 40_| 1440 | 7.5 5.0 5.0 | 400-500
‘ASM:MS60 |__750 450 6o_| 1440] 10.0 | 7.5 5.0 | 600-800
ASM-MS75 |__900 550 75 | 1440 | 125 | 10.0 6.0 | 1000-1200,
‘ASM-MSTO0] 1050, 650 joo | 1440 | 15.0 | 12.5 6.0_| 1400-1600.
‘ASM-MS125] 1200) 750 125 [| 1440 [18.0 [15.0 6.0 | 1800-2000
‘ASM.MS150] 1350) 950 150 [1440 | 20.0 [18.0 3.0 | 2200-2400.
‘ASM-MS200) 1500) 900 200 [1440 [25.0 [20.0 8.0 | 2800-3000
Note: + Models available in STAINLESS STEEL and GMP
‘The Capecty stated above is approximate enly and depends on various physical propertis of mat
to be Ground