Chapter 1. Introduction
Chapter 2. General design data and information
2.1 Hydrology
2.2 Hydraulic parameters
Chapter 3. Codes, standards and material properties
Chapter 4. Hydraulic design of project components
Chapter 5. Power and energy
Chapter 6. Conclusion
Chapter 1. Introduction
Chapter 2. Standard and codes
2.1 Codes used
2.2 System of units
2.3 Standard for design and testing
Chapter 3. Design requirements
3.1 Classification and types of gates
3.2 Material specifications
3.3 Design criteria
3.4 Design loads
3.5 Allowable stresses
Chapter 4. Design of Gates and Stoplogs
4.1 Gates
4.2 Stoplogs
4.3 Design of trash racks
Chapter 5. Design of steel penstock/pressure shaft, appurtenances & transitions
5.1 Selection criteria
5.2 Loading of penstock
5.3 Stresses in penstock shell
5.4 Minimum thickness of penstock
5.5 Appurtenances
5.5.1 Bends
5.5.1 Bifurcation
Chapter 6. Design of steel lining
Chapter7. Conclusion