Anda di halaman 1dari 3

INTISARI

PT Proton merupakan pabrik yang menghasilkan produk utama aseton. Bahan baku
produksi aseton dari PT Proton adalah propena dan air. Kapasitas produksi PT Proton sebesar
60.000 ton/tahun. PT Proton didirikan di Gunungsugih, Ciwandan, kota Banten. Pendirian pabrik
ini berdekatan dengan PT Krakatau Steel untuk memudahkan transport bahan baku. Kebutuhan
aseton di Indonesia semakin tinggi tiap tahun. Aseton sangat berperan di bidang kosmetik,cat,
sebagai pelarut dan produksi pembuatan bahan kimia lain. Kebutuhan aseton yang semakin
tinggi ini tidak seimbang dengan produksi yang dihasilkan. Sebagian besar kebutuhan aseton di
Indonesia masih melakukan impor di berbagai negara.. Oleh karena itu pendirian PT Proton ini
ditujukan untuk memenuhi kebutuhan aseton di dalam negeri serta melakukan ekspor ke
kawasan Asia.

Produksi Aseton pada PT Proton menggunakan metode hidrasi dan dehidrogenasi.


Pertama proses hidrasi terjadi pada trickle bed reactor dimana bahan baku propena dan air
menjadi reaktan sehingga menghasilkan IPA. Setelah melewati proses pemisahan IPA dan air
diumpankan pada reaktor PFR sehingga menghasilkan aseton dan gas hidrogen. Produk keluaran
ini selanjutnya akan didistilasi sehingga menghasilkan aseton dengan kemurnian 99%.

PT Proton menggunakan sistem utilitas untuk menunjang proses produksi. Sistem utilitas
yang ada pada PT Proton yaitu system utilitas air, listrik, bahan bakar, steam dan udara tekan.
Limbah yang dihasilkan PT Proton terdapat berbagai macam yaitu limbah padat seperti limbah
domestic dan limbah padat katalis, limbah cair seperti keluaran air proses dan limbah sanitasi
serta limbah gas seperti gas CO2.

Analisa ekonomi yang dilakukan pada pendirian PT Proton ini menghasilkan nilai NPV
sebesar US 169.319.530, ROI sebesar 35.17%, IRR sebesar 37,43 % dan Payback period selama
5,25 tahun dengan umur pabrik selama 10 tahun. Berdasarkan hasil analisis ekonomi yang
dilakukan pendirian pabrik aseton ini menghasilkan keuntungan yang tinggi serta layak untuk
didirikan.

Kata Kunci : Aseton, Hidrasi, Dehidrogenasi, Limbah, Utilitas, ekonomi.


ABSTRACT

PT Proton is a plant that produced acetone as main product. Raw material for produced
acetone are propene and water. PT Proton production cost is 60.000 ton / year. PT Proton is
designed in Gunungsugih, Ciwandan, Banten city. The design for this plant is near to PT
Krakatau Steel for easier transported the raw material. The demand for acetone is getting higher
every year. Acetone is important for cosmetics, paints, as solvents and for production other
chemical. The demand for acetone is not balanced with the production. Most of the acetone in
Indonesia still imports from another countries. Data for acetone imports in 2018 was 22.351 ton.
Because of that this plant design is to fulfill the demands for acetone and did some exports to
Asia region.

Production acetone in PT Proton used the hydration and dehydrogenation method. First
the hydration process occurred in trickle bed reactor where propene and water become the
reactants to produce IPA. After going through to separation process, IPA and water is fed to PFR
reactor to produce acetone and hydrogen. This product will distilled in distillation column to
produce acetone 99 % purity.

PT Proton used a utility system to support the production process. The utility system in
PT Proton are water, electricity, fuel, steam and compressed air. The waste produced by PT
Proton are domestic and catalyst solid waste, process water output, sanitation waste and CO2 gas.

The result of economic analysis on this design is NPV value US 169.319.530, ROI value
35.17%, IRR value 37.43% and a payback period 5.25 years with a 10 years plant life. Based on
results This plant design give high profit and feasible to be established

Keywords : Acetone, hydration, dehydrogenation, waste, utility, economics.

Anda mungkin juga menyukai