C90700
C as t P r o d u cts
Cast • GreenAlloy™
Solids: 1
⁄2" to 10" O.D.
|
Rectangles: Up to 20"
C90700
Standard Lengths: 144"
Shape/Form: semi-finished, mill stock or near-net shapes, anode, bar stock, billet/bloom, squares, hex, plate, profile or
structural shape, flats/rectangular bar
Typical Uses
Industrial restaurant equipment, worm gears, gears, bearings for heavy loads and relatively low speeds, bearings, gear
boxes, speed reducers, valve bodies, worm gears
Chemical Composition
Cu%1 Pb% Sn% Zn% Fe% P%2 Ni%3 Al% S% Sb% Si%
88.00- 10.00-
90.00 0.50 12.00 0.50 0.15 0.30 0.50 0.005 0.05 0.20 0.005
Machinability
Copper Alloy UNS No. Machinability Rating Density (lb/in³ at 68 ˚F)
C90700 20 0.317
14315 State Route 113 • Wakeman, OH 44889 • Phone 800.626.7071 • Fax 724.538.3956
C90700 continued
C90700
Mechanical Properties
Tensile Strength, min Yield Strength, at 0.5% Elongation, in 2 in. or Brinell Hardness Remarks
|
Physical Properties
US Customary Metric
14315 State Route 113 • Wakeman, OH 44889 • Phone 800.626.7071 • Fax 724.538.3956