com
1 Types
Description
Our Thermal mass ow meter is a standard solution optimal for various gas ow applications. This is specially designed for
applications with temperatures up to 150 °C. Both of the thermal gas ow series works on the anemometric principle
and consists of two platinum resistors on one chip which is immersed in a ow channel- a small resistance which is
which is immersed in a ow channel- a small resistance which is used as heater and a high resistance which is used
for the measuring of the gas temperature. The anemometric principle is based on a function of the ow speed and
utilizes heat transfer principles to determine the ow velocity. The heater is set to a constant temperature di erence
above the ambient temperature detected by the temperature sensor.
Process connection BSP threaded, DIN & ANSI fanged; other on request eg
ti-clamp, NPT
Flange rating PN 16, 40, 100 (BS EN 1092-1); ANSI 150, 300, 600 RF (ANSI B16.5)
Compatibility Air, Oxygen, Nitrogen, Argon, Hydrogen, Natural Gas, LPG gas, Bio Gas, Compressed Air,
Co2 Gas, Ammonia, Ethane, Helium, Methene
Materials Body: 304 stainless steel (standard); 316 (optional); other materials available on request
Sensor Platinum Winding encapluted in SS316L
Enclosure Die-cast Aluminum
Features
SCFM, NM3/hr, Lbs/hr, Kg/hr and more
Dirt Insensitive
No Moving Parts
Ease of Installation
Negligible pressure drop
Wide turndown capability of 100 to 1
Economical solution for large diameters
Output both ow rate and temperaturesimultaneously
Accurate measurement and operation at very low gas pressures and ow rates
Measures mass ow directly - without additional Pressure and temperature inputs
Insertion and in-line models
we measure the facts
www.pcd- owmeter.com