Ungrouped Data
Grouped Data – Data that has been organized into groups (into a frequency distribution).
If you see a table similar to the one below, you will know that you are
dealing with grouped data:
Class Frequency
0–5 4
6 – 10 5 The frequency of a class is
11 – 15 12 the number of numbers in
16 – 20 7 that class. For example, there
must have been four numbers
between 0 and 5.
Ungrouped Data – Data that has not been organized into groups.
Ungrouped data looks like a big ol’ list of numbers.
The first step in grouping data is deciding how large of a class interval to use.
(Class interval = Class size)
There are 2 formulas for determining the appropriate class interval. You must be able to
choose which one would be appropriate for any given problem.
**Don’t forget to always round up to the nearest whole number when dealing with
class interval.**
Populations vs. Samples
Population – A collection of all possible individuals, objects, or measurements (Mason
7).
Please note that a population does not have to be huge in size. It is all a matter of how
the objects in the group are defined. For example, if we wanted to compute the average
GPA of the population of students taking BA254 at GRCC in the summer of 2002, our
population would only include approximately 75 people. On the other hand, if we
wanted to find the average GPA of all students who have ever taken BA254 at GRCC, we
would be dealing with a much larger number of students.
This is because of how each population was defined. In the first example, we gave our
population a definition that severely limited the number of GPA’s that would be included.
The second population was defined a little more broadly, and, therefore, more students
would fall under this definition.
s2 = Sample variance
ó 2 = Population variance
4. Standard Deviation = s or ó
**Please note that the variance is equal to the standard deviation squared.
This also means that the standard deviation is the square root of the variance.
Or
**Also, please note that you will have to differentiate between populations and samples
when dealing with ungrouped data.**
**The mean for ungrouped data will be calculated in the exact same way, regardless of
whether you are dealing with a sample or a population. Later in this class, you will need
to differentiate between ì and X. It is, therefore, a good idea to become aware of the
definitions of ì and X now.**
MODE = MOST
Whichever number or numbers that appear the most within a list (set) of data.
VARIANCE = s2 or ó 2
**When dealing with Ungrouped data, you must determine whether you
are dealing with a sample or a population when computing the standard
deviation or the variance. Be careful!!! (If it is a sample, you will likely
see the word “sample” in the problem. If it is a population, you may or
may not see the word “population” in the problem. In other words, if
you do not see the word “sample”, assume that you are dealing with a
population!)
s2 = Sample Variance =
ó 2 = Population Variance = =
STANDARD DEVIATION = s or ó
The GM is useful when averaging percentages and also when looking for an average
percentage increase over time (taking into account the effects of compounding).
There are 2 G.M. formulas on your formula sheet. You need to know when and
where to use each!
GEOMETRIC MEAN FORMULA #1
This formula is appropriate where you have a big ol’ list of numbers (ungrouped
data).
a
G.M. = a
a
n = number of numbers
X1, X2 = each individual value
GEOMETRIC MEAN #2
This formula is appropriate where you have a beginning as well as an ending value.
This formula, therefore, also involves time, and it is likely to involve years and/or
dates.
n
G. M. = n
n
**The straight up and down brackets indicate absolute value. Please remember
that this means to add up all of the differences without paying attention to whether
they are negative or positive!
Mean deviation is another measure of spread (others include range, std. deviation,
variance).
MEDIAN (UNGROUPED)
Steps:
Location of Median =
This formula tells us the rank of the median in terms of smallest to largest.
3. Determine the value of the median by applying the number you got from the location
of median formula to the ascending list of numbers that you just created.
For example, if the location of the median is equal to 7, then the median is the 7th number
in order of smallest to largest.
Using another example, if the location of the median is equal to 7.5, then the median is
halfway (.5) between the 7th and the 8th numbers in order from smallest to largest.
Q1, Q3, and Quartile Deviation
Q1 = First Quartile
Q1 is the value that has 25% of the data set below it, and 75% above it.
Computing Q1 and Q3 is very similar to the way the median is determined. In fact, the
median could also be called Q2.
Steps:
1. Locate Q1.
Location of Q1=
3. Determine the value of Q1 by applying the number you got from the location of Q1
formula to the ascending list of numbers that you just created.
Value of Q1 = (Higher number of the two – lower number of the two) * the
percentage to the right of the decimal place from you result to the location formula
+ the lower of the two numbers
Q3 = Third Quartile
Q3 is the value that has 25% of the data set below it, and 75% above it.
Computing Q1 and Q3 is very similar to the way the median is determined. In fact, the
median could also be called Q2.
Steps:
1. Locate Q3.
Location of Q3=
3. Determine the value of Q3 by applying the number you got from the location of Q3
formula to the ascending list of numbers that you just created.
Value of Q3 = (Higher number of the two – lower number of the two) * the
percentage to the right of the decimal place from you result to the location formula
+ the lower of the two numbers
Formulas for Grouped Data Problems
**Please remember how to distinguish between Grouped and Ungrouped Data (On
previous pages)**
If you are presented with a problem consisting of Grouped Data, you will need to use
some formulas and techniques which are unique to Grouped Data Problems.
**Also, please note that you will not have to differentiate between populations and
samples when dealing with grouped data.**
**I will use the following example to illustrate all of the following calculations relating
to grouped data:
Class Frequency = f
0 up to 5 2
5 up to 10 7
10 up to 15 12
15 up to 20 6
20 up to 25 3
= = 380/30 = 12.667
STANDARD DEVIATION (GROUPED) = s
s=
s = 5.331
VARIANCE (GROUPED) = s2
MEDIAN
This formula tells you what “place” the median would be in if the numbers were
placed in order from smallest to largest! In this example, the median is located
halfway between the 15th and the 16th numbers.
2. Now figure out which class would contain the median. (Remember the median in
this example is between the 15th and the 16th numbers in order from smallest to
largest.)
3. Do the Math!
**This is one of the trickier formulas for this exam! Please take close note of
what the following variables stand for in this particular problem:
Median =
Median =
The mode for a grouped data problem is the midpoint of the class with the highest
frequency (f).
The class 10 – 15 has the highest frequency (12), so the mode is the midpoint of
this class. MODE = 12.5
**Please take close note that the formulas used for computing the mean, the
median, and the standard deviation for GROUPED data, all contain
lowercase “f” in them !!!! I would recommend that you use this fact to help
remember which formulas are appropriate for the grouped data problems.
RANGE (GROUPED)
Range (Grouped) = Upper Limit of Highest Class – Lower Limit of Lowest Class
In our example, 0-5 is the lowest class and 0 is the lower limit of this class. Also,
20-25 is the highest class, and 25 is the upper limit of this class.
Range(Grouped) = 25 – 0 = 25
Uses of Standard Deviation
Chebyshev’s Theorem =
Many years ago, Russian mathematician P.L. Chebyshev developed a theorem that allows
us to determine, for any set of data, the minimum proportion of values that lie within a
specified number of standard deviations from the mean.
Basically, Chebyshev’s Theorem states that at least 1- (1/k2) of the data must fall between
the points + ks and - ks.
So, one could say that at least 75% of the data in any given set will fall within 2 standard
deviations of the mean.
Proof
1-(1/k2) = 1 – (1/22) = 1 – ¼ = .75
Further, if it was known that the mean of the same set of data was equal to 20 and the
standard deviation was equal to 5, one could conclude that at least 75% would fall
between 10 and 30.
Proof
We proved that 75% fall within 2 standard deviations of the mean when we did that
calculation a couple of seconds ago.
Now we need to figure out how far two standard deviations from the mean is in our
particular example!
+ ks = 20 + 2*5 = 20 +10 = 30
- ks = 20 – 2*5 = 20 – 10 = 10
Empirical Rule (For the “normal” distribution) ***(Grouped or Ungrouped)***
First of all, the normal distribution is a set of numbers where the 3 main measurements of
central tendency (the mean, median, and mode) are all approximately equal. Graphically,
a normal distribution is bell-shaped and symmetrical.
For the normal distribution, we can be more precise as to what percent of the data will
fall within a stated “distance” from the mean.
± 1S 68%
± 2S 95%
± 3S 99.7%
X ± M.D. 57.5%
In addition to memorizing the percentages dealing with the normal curve above,
make sure to remember that 57.5% of the data for any set of numbers will fall
between – M.D. and +M.D.
Sk =
The coefficient of skewness is another measure of where the data in a distribution are
located. This formula might indicate that an extreme value (high or low) has affected the
mean in a significant way.