ETS Sofi Nida Aulia
ETS Sofi Nida Aulia
Example 1
Hasil Example 1
Plan and Dose
Dose Evaluation X
Dose Evaluation Y
Dose Evaluation Z
Example 2
Dari hasil example 1, save as dan berikan nama project ID dan project name
Contoh project ID ETSsofinidaulia (tidak boleh spasi), project name example 2
Centang S2 dan S3 kemudian setting pengaturan , pilih simulation engine centang Dose
Planing Method (DPM). Tekan OK
Kemudian run simulation , tunggu sampai proses selesai kemudian exit
Untuk memulai perbandingan buka dose evaluation workspace, load external dose dari PRIMO
project masukkan file Example01.ppj
Save as hasil dari example 2 kemudian masukkna proect ID dan project name
Contoh project ID = ETSsofinidaaulia, project name example 3
Inport a CT masukkan file CT dari folder c:\PRIMOexamples\Example03\Example03-
patient. masukkan file CT_Patient (1) sampai CT_Patient (150) kemudian tekan open, uncheck
pada kolom create the default simulation geometry lalu tekan import
Masuk ke simulation setup dan centang S2 dan S3, lalu settinglah configure simulation .
Cettag caorse dose, tekan dise untuk memilih random angka generator. kemudian OK
Pilih configure variant reduction setting splitting factor (max 300) lalu OK
Setelah semau setting sudah dimasukkan. Mualailah runing simulation tunggu sampai proses
selesai
Ketika proses runnig telah selesai, pergi ke tap dose evaluation. Pada menu evaluation pilih
DICOM file, masukkan file RTDOSE-patient-PRIMO-Example03.dcm. kemudian OK
Hasil Example 3
Dose Evaluation
Reference project ID: RTSSofiNidaAulia3b *Average dose standard uncertainty (%): 4.90
External project ID or file: RTDOSE-patient-PRIMO-example03.dcm *Average dose standard uncertainty (%): 4.72
*Computed for all the voxels with a dose above Dmax/2
and the conditions of dose threshold and uncertainty
limit specified below
Dose-Volume Histograms:
PA GPR Difference [%]