Dear Sir,
Further to your recent enquiry for a 150/45-2L pump, we have pleasure in submitting our offer for your
consideration.
Due to the pressure constraints on the pump casing, this pump has a maximum design head of 160m at
the requested flow of 5 m3/min. Operating speed for this duty is 1900rpm.
The attached price and technical schedules provide comprehensive details of the products offered.
However, should you require any further information then please do not hesitate to contact the
undersigned.
Yours faithfully,
SPP Pumps Limited
M Bagg
Business Manager - Water
Item 1 2 3 4
Application
APPLICATION REQUIREMENTS
Number of units 2
Liquid Clean Water
Pumping Temperature °C Ambient
Specific gravity 1.0
3
Unit Flow m /h 300
PUMP DATA
DRIVER DETAILS
Rating kW
Motor Speed (Nominal) rpm Not
Motor FL Efficiency % included
Motor FLC A in
Motor Noise Level dB(A) SPP
Electrical supply V/ph/Hz scope
Enclosure
Insulation (With class B temperature rise)
Delivery w/weeks 16
* Based on cold water at sea level above vapour pressure at centre line of impeller
Pump Specification
The pump selected is from our (LLC), designed to offer enhanced life, lower
maintenance costs and improved efficiency, resulting in the lowest total cost of ownership.
The pump unit will be supplied bareshaft, without baseplate, coupling, guard or driver.
For potable water applications, all none metallic components in contact with the pumped fluid will be
certified DWI approved.
Internally the pump is finished with an approved protective coating, while externally it is coated with a 2
pack epoxy system having a dry film thickness of 340 microns.
The range features a number of significant benefits, each of which contribute to the LLC principle:
Feature Benefit
Precision cast stainless steel impeller Increased component life
Increased Cavitation resistance
Superior Hydraulic Performance
Dynamically Balanced rotating assembly Increased Bearing and Component life
Positively locked and keyed impeller Easily removable, aiding maintenance
Substantial stainless steel shaft Increased bearing and shaft life
Reduced maintenance and energy costs
API type double row thrust bearing L10 life in excess of 50,000 hours across the
approved operating range
Serrated case wear rings Long life and reduced energy costs
Universal seal chamber Designed for single or double cartridge seals, or
traditional gland packing
Mechanical seal Operation with negative suction pressures/suction lift
Ease of maintenance and operation, reducing running
and operating costs
Externally removable bearing housing Enables bearings and seals to be replaced without
removing the top half casing. Lower maintenance
cost and reduced down time.
Standard acceptance of pumps from performance test results will be based on ISO 9906 Part 1, with the
following ISO 9906 grade 2 tolerances:
The efficiencies quoted on our technical schedules relate to pump performance, and are duty point
guaranteed in accordance with the above.
The pump will be performance tested at our works using a slave motor at a nominal speed of 1450rpm,
and the results corrected to 1900rpm using the affinity laws.
Conditions of Sale
This quotation is subject to our agreed modified B J Services Terms & Conditions of Purchase.
Prices
The prices quoted are fixed for 30 days, firm for the duration of the despatch time given providing an
order is received within the validity period and are strictly nett being exclusive of VAT, taxes or any other
duties that may become applicable, these to be charged at the rate current at final invoicing.
Price is on an ex works unpacked basis and include for test certificates and our standard Operation and
Maintenance Manuals.
Guarantee
Our standard “return to base” guarantee in respect of faulty workmanship or materials is 12 months from
receipt on site or 18 months ex works whichever is the shorter. The guarantee on equipment not of our
manufacture is that which we are only able to obtain from and enforce with the particular manufacturer.
Please note that where lifting equipment is not installed or available on site, it is the responsibility of the
purchaser or end user to provide suitable lifting equipment required to enable SPP to undertake any
warranty work.
Terms of Payment
To be agreed subject to satisfactory credit references.
Despatch
The working weeks despatch time stated is to ex works completion and dates from receipt of full and
final instructions enabling us to proceed with manufacture without interruption and being subject to no
prior sale of stock items.
PREPARATION
PRIMING
Castings and fabrications primed using a polyamine type non toxic primer.
Castings and fabrications coated using high build two pack polyamide epoxy based top coat.
Colour : Green
D.F.T. : 125 Microns
Application : Spray, brush or dip
Castings and fabrications undercoated using high build two pack polyamide epoxy based top coat.
Colour : Grey
D.F.T. : 125 Microns
Application : Spray, brush or dip
COSMETIC TOPCOAT
Castings and fabrications coated with a cosmetic top coat, using a single pack modified acrylic.
Colour : Blue
D.F.T. : 40 Microns
Application : Spray, brush
NOTES:
i) "Standard" units are not painted internally.
ii) Total coating thickness = 50 + 125 + 125 + 40 = 340 microns
iii) For "Standard" units where customers will apply their own finish top coat then the process could
terminate after application of the second top coat. Any additional top coat must be compatible with
the existing coat.
180
160
140
120
Head - m
100
80
60
40
20
90
80
14
70
12
Efficiency - %
60
50 10
40 8 NPSHr - m
30 6
20 4
10 2
0 0
400
Power - kW
300
200
100
0
0 80 160 240 320 400 480 560
Flow - m3/h