This quick start guide provides instructions and reference material for getting started
with ANTlabs InnGate 3 products: M-Series and E-Series. If you have any problems,
please contact our technical support team at +65 6100 7877 or email: tech-
support@antlabs.com.
Package Contents
E-Series
• 1 - InnGate 3 E-Series hardware
• 1 - InnGate 3 E-Series faceplate
• 1 - Power Cable
• 1 - USB-Serial Converter
• 1 - Rack Mount Kit
• 1 - InnGate 3 Quick Start Guide
M-Series
• 1 - InnGate 3 M-Series hardware
• 1 - External Power Adapter
• 1 - Power Cable
• 2 - Rack Mount Brackets with screws
• 1 - InnGate 3 Quick Start Guide
Start Here
Overview
E-Series
Front Panel
Back Panel
Installation
Bits per Second Data Bits Parity Stop Bits Flow Control
115200 8 None 1 None
b. Admin GUI:
i. Connect a straight Ethernet cable between InnGate 3’s LAN
port to your PC’s Ethernet port.
ii. Configure your PC to use DHCP.
iii. Open a web browser from your PC and type
“https://ezxcess.antlabs.com/admin/” in the address bar.
Configuration
f. Change the IP address, netmask, and the gateway’s IP. Save changes
and close the menu
g. Choose “DNS Server Configuration” menu. Fill in the DNS server’s IP
address. Save changes and close the menu.
h. Reboot the gateway by choosing menu “Reboot”.
InnGate IP Configuration