Note: This guide is valid for RPAs shipping for use with the following
RecoverPoint product releases:
3.3 and later
3.2 SP1 and later
3.1 SP3 and later
1
Step 1: Inspect the contents of the packages
3. Connect Fibre Channel cables from the RPA HBAs to the specified
ports on the Fibre Channel switches, per instructions in the
RecoverPoint Zoning and LUN Masking Technical Notes.
4. Connect Ethernet cables from the RPA to the management and
WAN networks.
5. Connect your laptop/installation computer to the RPA using a
serial cable.
2. Click Update.
The Updating license key dialog box is displayed.
a. From the same email, copy the license key to the License Key
field
b. Click OK to exit the dialog box.
3. Click Apply.
RecoverPoint will now be enabled for an initial period of at least
seven days. After the initial period, you must have an activated license
to use the RPA for RecoverPoint replication. Instructions on how to
obtain and activate your permanent RecoverPoint license, and all
other RecoverPoint licensing procedures, are presented in the
RecoverPoint Administrator’s Guide.
EMC believes the information in this publication is accurate as of its publication date. The information is
subject to change without notice.
THE INFORMATION IN THIS PUBLICATION IS PROVIDED “AS IS.” EMC CORPORATION MAKES NO
REPRESENTATIONS OR WARRANTIES OF ANY KIND WITH RESPECT TO THE INFORMATION IN
THIS PUBLICATION, AND SPECIFICALLY DISCLAIMS IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Use, copying, and distribution of any EMC software described in this publication requires an applicable
software license.
For the most up-to-date listing of EMC product names, see EMC Corporation Trademarks on EMC.com.
All other trademarks used herein are the property of their respective owners.