Ives
877-671-7011 Customer Care
877-424-8494 Fax
Schlage Residential
800-847-8688 Customer Service
800-366-5625 Fax
www.ives.ingersollrand.com
Table Of Contents
HINGES
How to use this book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv
CONTINUOUS
Keys to Finishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi-vii
HINGES
Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-15
PIVOTS
Pivots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20-21
Numerical
1-059
Numerical
59-437
438-1021
Numerical
1152-8190
Numerical
8200-9340
Numerical
order issued by Customer. (d) No reference herein to Customer’s purchase order will in any way Schlage Software & Controllers Freight Charges Apply
incorporate different or additional terms and conditions which are hereby objected to.
Von Duprin $7,000
(e) ANY ACCEPTANCE BY COMPANY OF CUSTOMER’S PURCHASE ORDER
IS EXPRESSLY CONDITIONED ON THE CUSTOMER’S ASSENT TO AND LCN $7,000
ACCEPTANCE OF THE TERMS AND CONDITIONS CONTAINED IN THIS AGREEMENT. (f) In IR FASTRACK $7,000
the event of a conflict between this Agreement and a purchase order issued by Customer, the terms of this
Agreement will prevail. In the event of a conflict between this Agreement and any specific Product or Falcon Locks $5,000
Service terms and conditions, the specific Product or Service terms and conditions will prevail. Falcon Exits $5,000
CONTINUOUS
(a) Scope of Products and Services. The scope of the Products and Services (including, but not Falcon FASTRACK $5,000
limited to location) are (i) attached to this Agreement, (ii) separately furnished by Company to
Customer, or (iii) subject to Section 1 herein, contained in an order submitted by Customer. Ives & Glynn-Johnson $1,000
Non-standard finishes and special items may be available. Contact Company for such availability. Steelcraft Refer to separate freight terms
All Products that come in “kits” cannot be sold as individual pieces. See the specific product terms On shipments of the net dollar amount or more to all foreign countries and US territories, freight will be
and conditions for exceptions. (b) Orders. All orders submitted by Customer must be in written form allowed (and prepaid) to the Port of Embarkation. Shipments under the net dollar amount will be prepaid
acceptable to Company. (c) Receipt of an Order. Company will acknowledge receipt of each order by Ingersoll Rand and 3.0% of the net invoice amount or $10, whichever is greater, will be added to the
issued in accordance with this Agreement and will notify Customer whether such order has been invoice. All expedited methods of shipment, such as 'next day air', will be prepaid by Ingersoll Rand but
accepted or rejected, in whole or in part, by Company. If Company fails to acknowledge receipt of an the entire shipping costs will be added to the invoice. Ingersoll Rand will ship as requested, freight
order, within a reasonable time period, such failure to acknowledge receipt will be deemed a rejection of collect, if the customer is willing to bear the entire expense and so indicates on the order. Once received
the entire order. (d) Changes to Orders or Cancellation of Orders. Change order request and
PIVOTS
by IR, a purchase order cannot be combined with another purchase order to qualify for freight allowed.
Cancellations can be by phone, fax, or email. Changes and Cancellations are allowed without penalty if In addition the customer may not combine any of the brands or product categories listed above on a
made within 48 hours of order receipt if the order has not shipped. Some exceptions do apply - please single purchase order to qualify for freight allowed, except in the case of FASTRACK. IR FASTRACK
consult the factory. After 48 hours, all changes or cancellations are subject to a charge of 25% of the net may not be combined with Falcon FASTRACK to qualify for freight allowed. (e) Claims. All claims for
product or service value plus the cost of any fabrication or raw materials that have been purchased for the loss or damage to Products while in the care, custody, and/or control of a carrier will be the responsibility
order. Unless otherwise specified by Company in writing, any changes to orders acknowledged by of Customer, who will submit any claims. (f) Packing. Company will pack, mark, and ship the Products
Company that affect the delivery date will be deemed a new order and will require acknowledgement by according to its standard procedures for shipment, unless the parties agree, in writing, that Company will
Company as provided in this Section 2. The Customer cannot change or cancel credential orders and bio- comply with any special instructions provided by Customer. Compliance with special
metrics orders once they have been placed. If a change or cancel must occur, then the Customer will pay instructions may result in an increased price.
a penalty to change credential and biometrics orders.
5. CLAIMS. Claims due to shortages, errors, omissions, damaged goods, or defective material must be
Numerical
3. PRICES AND PAYMENT. (a) Prices. The prices specified by Company are subject to change, with-
1-059
stop shipment, without any liability to Company, until Customer submits payment or assurance of
59-437
ber, the original invoice number, and the reason for the return must be included in the return. If the
payment, as required by Company. (e) Default. If Customer is in default in payment or otherwise with company approves the return, a credit will be issued to the Customer’s account less freight and a han-
respect to any order for Products or Services or any other contract with Company, Company shall have dling charge of 35% of the net material on the original invoice. Handling charges may vary
the right, in addition to all other legal remedies and without prejudice to any of its right hereunder, to depending on the condition of the return. The amount of final credit will be determined upon receipt at
defer further shipments until such default is corrected and to declare all outstanding bills of Customer to the factory and analyzing the condition of the material. Factory retains the right to deny credit to
be immediately due and payable. (f) Taxes. Any taxes, charges, or duties imposed by any governmental anyone for any reason.
authority on the sale of Products or Services will be paid by Customer, in addition to the selling price
specified by Company. (g) Late Payment Charge. A late payment charge of 1.5% per month 8. TECHNICAL INFORMATION AND ADVICE. (a) All designs, data, and specifications
equivalent to 18% per annum will be charged on past due balances owed Company. Provided however, provided by Company are proprietary and will not be disclosed or reused by Customer without the prior
that in the event that applicable governmental law sets a maximum rate for late payment fees which is written consent of Company. (b) Company assumes no obligation or liability for any advice given by
438-1021
Company, the results obtained, or damages incurred, and all such advice is given and accepted at
Numerical
less than 18% per annum, then the late payment charge assessed will be set at the maximum rate
permitted by law. Customer’s risk.
4. INSPECTION, DELIVERY, SHIPPING, FREIGHT CHARGES, CLAIMS, AND PACKING. 9. INTELLECTUAL PROPERTY OWNERSHIP.
(a) Inspection. Inspection of Products and Services will be done by Customer immediately after receipt Nothing herein is a grant or license or right under any specific patent or intellectual property asset of
of Products or completion of Services. Inspection of Products or Services by Customer at Company's ither party. With regard to intellectual property ownership, all intellectual property and related
facility is not permitted. (b) Delivery. Product delivery schedules are based upon current production intellectual property rights (hereinafter “IP”) owned by one party before the date of this Agreement will
capacities, material or component availability, and inventory, and may be changed by Company as remain owned by that party. All IP conceived, developed, or reduced to practice as part of this
conditions require. Service delivery schedules are based upon prompt receipt of, and prompt access to, Agreement after the date and during the term of this Agreement shall be owned by the party creating the
Customer’s equipment and all information necessary to complete the Services. In no event will Product intellectual property if created by one party without the benefit of the other party’s IP. All IP created
1152-8190
or Service delivery dates be construed as falling within the meaning of “time is of the essence.” Partial jointly will be owned by the parties jointly, in direct proportion to monetary contribution. The party
Numerical
delivery shall be accepted by Customer and paid for at the price and on the terms stated herein. Any that has a majority interest shall manage the jointly owned IP. Neither party shall disclose any of the
partial delivery of Products or Services, shall constitute a separate sale and payment shall be separately other party’s IP to a third party without prior written consent. All intellectual property and related
made when due. If any part of the Products or Services are not delivered by Company in accordance with documents which are confidential shall remain subject to the terms and conditions of this Agreement
Customer’s order, this Agreement shall not be affected thereby. (c) Shipping. Unless otherwise specified for twenty (20) years from its effective date, unless such information is made public before this
by Company, (i) where the Customer is located in the United States, all Products will be sold “Uniform time expires.
Commercial Code, F.O.B. Origin, Company's factory”; and (ii) where the Customer is 10. LIMITED WARRANTY.
located outside of the United States, all Products will be sold “ Ex-works, Company's factory
(Incoterms 2000).” In either instance, title and risk of loss will pass to Customer upon delivery to the car- (a) Company's Standard Limited Warranty(ies) relating to Products or Services are applicable to this
rier at Company's factory. Provided however, a security interest will remain in the Products, Agreement. The limited warranty(ies) are (i) attached to this Agreement; (ii) separately identified in
the specific Product Price Book; or (iii) separately furnished by Company to Customer.
8200-9340
regardless of mode of attachment to realty or other property, until full payment has been made therefore,
Numerical
and Customer agrees, upon request, to do all things and acts necessary to protect Company’s interest by (b) (i) In the event that certain Product warranties are not attached to this Agreement or separately
adequately insuring the Products against loss from damage from any cause and to have Company named furnished, Company warrants only to Customer that Products will be free from defects in material and
as an additional insured. Copies of all Certificates of Insurance will be provided to Company upon workmanship for a period of 12 months from the date of shipment of the Products. CO-Series locks,
request. Customer will also assist Company in providing all necessary documents or signatures AD-Series locks, AD-Series Reader Modules, WPR400, WRI400, WSM400 TK400, CT5000,
required to file any documents to perfect Company’s interest in such Products. (d) Freight Charges. The PIM400, PIM401, PIB300, and PIB301 will be warranted for a period of 12 months from the date
full cost of freight, via a carrier of our choice, will be allowed (and prepaid) on shipments of the net dol- of installation, not to exceed 24 months from the date of shipment from the factory. Company’s
lar amount or more indicated in the chart below within the United States of America, excluding sole obligation under this warranty is limited to repairing or replacing, at its option, the defective
all territories. Products. (ii) The provisions of this limited Product warranty do not apply to Products: (A) used
for the purposes for which they are not designed or intended;
11-1/1
HINGES
tion nonconformance to the warranty.
17. TERMINATION. (a) This Agreement may be terminated by either party by giving 30 days'
(c) (i) In the event that certain Service warranties are not attached to this Agreement or separately written notice to the other party in the event of failure by such other party to fulfill any of its
furnished, Company warrants only to Customer that the Services will be free from defects in obligations hereunder. However, if during the period of such notice, such other party remedies such
material and workmanship for a period of 6 months from the date of completion of the particular failure, this Agreement will continue with the same force and effect as if such notice had not been
items of Service.Company’s sole obligation under this warranty is limited to repairing or replacing, at given. (b) This Agreement may be terminated upon the written mutual consent of the parties. (c) Either
its option, the defective Products. (ii) The provisions of this limited Product warranty do not apply to party may immediately terminate this Agreement by giving written notice to the other party in the event
Products: (A) used for the purposes for which they are not designed or intended; (B) which have been of the happening of any of the following or any other comparable event: (i) insolvency of the other
repaired or altered without Company's prior written consent; (C) which have been subjected to misuse, party; (ii) filing of a petition in bankruptcy by or against the other party; (iii) appointment of a receiver
CONTINUOUS
abuse, negligence, or accident; (D) which have been improperly stored, installed, maintained, or or trustee for the other party; or (iv) execution of an assignment for the benefit of creditors by the other
operated; (E) which have been used in violation of written instructions provided by Company to party, all of which will allow Company to demand reclamation of all affected orders. (d) Except as pro-
HINGES
Customer; (F) which have subjected to improper temperature, humidity, or other environmental vided in this section 17, Customer may not terminate this Agreement, in whole or in part, unless
conditions; (G) which have been affected by normal wear and tear; or (H) which, based on Company's Company’s prior written consent is obtained and Customer agrees to pay all of Company’s cancellation
examination, do not disclose to Company's satisfaction nonconformance to the warranty. charges.
(c) (i) In the event that certain Service warranties are not attached to this Agreement or separately 18. GOVERNING LAW; VENUE; AND EXPENSES. (a) This Agreement and any disputes or
furnished, Company warrants only to Customer that the Services will be free from defects in material controversies arising hereunder will be governed by and construed according to the internal laws of
and workmanship for a period of 6 months from the date of completion of the particular items of the State of Indiana, United States of America, without regard to its conflict of law principles, and not
Service. Company’s sole obligation under this warranty is limited to repairing or reperformance, at its including the United Nations Convention on Contracts for the International Sale of Goods. (b)
option, of the Service; provided however, if repair or reperformance is either impractical or impossible, Jurisdiction and venue with respect to any action, proceeding, or suit in connection with this Agreement
the Company will refund to Customer that portion of the price paid to the Company for the defective will reside in the courts of the State of Indiana. (c) Customer agrees to pay for all expenses (including
item of Service. This warranty only applies if the company is given written notice of the defect or
PIVOTS
attorney’s fees) incurred by Company in enforcing the obligations of Customer under this Agreement.
nonconformance by the Customer within 30 days of discovery. (ii) The provisions of this limited
Service warranty does not apply to any defects or issues with the design or performance of equipment 19. COMPLIANCE WITH LAWS, EXPORT CONTROLS, CERTIFICATIONS, AND
or products not manufactured by Company, nor does it apply to any code compliance or permit NUCLEAR LIABILITY. (a) This Agreement is subject to, and Company and Customer will
requirements for the assembly, installation, erection, or construction of any goods. comply with, all laws and export controls, regulations, rules, orders, licenses, requirements, and
governmental requests now or hereafter in effect in the United States of America that pertain to the
(d) NO OTHER WARRANTIES, EXPRESS OR IMPLIED, ARE MADE WITH RESPECT TO Products or the initial sale of the Products or that pertain to Services. Provided however, Company is
THE PRODUCTS OR SERVICES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED not responsible for obtaining or maintaining any permits for the performance of Services or the
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. verification or compliance with any code requirements relative to the performance of Services. To the
(e) The following costs and expenses are not covered by the provisions of these limited warranties: extent any sale of Products or Services pursuant to this Agreement may require approval of the U.S.
(i) labor costs for the removal and reinstallation of Products or other manufacturer’s products; Government, Company’s obligations under this Agreement are conditioned upon the grant of such
Numerical
(ii) shipping and freight expenses required to return Products to Company; (iii) normal maintenance; approval and upon compliance by Customer with any restrictions imposed by the U.S. Government in
1-059
and (iv) economic losses. In addition, the provisions of this warranty are not applicable to anything connection with such approval. (b) Certain Products are noted by Company as tested by independent
other than defects in Company’s material (products only) or workmanship. laboratories for compliance with UL and/or ANSI standards. Any and all modifications or alterations
to such Products will void such certification, and Company is not liable to Customer to certify any
11. CUSTOMER'S REMEDIES. THE CUSTOMER'S EXCLUSIVE AND SOLE REMEDY
modified or altered Product. (c) In the event the Products are to be used in a nuclear facility, the
ON ACCOUNT OF, OR IN RESPECT OF, THE FURNISHING OF PRODUCTS OR
Customer shall, prior to such use, arrange for insurance or governmental indemnity protecting
SERVICES THAT DO NOT CONFORM TO THIS AGREEMENT WILL BE TO (A) SECURE
Company against liability. The Customer hereby releases and agrees to indemnify Company and its
REPAIR OR REPLACEMENT OF THE PRODUCTS; OR (B) SECURE REPAIR OR
suppliers for any nuclear damage including, but not limited to, loss of use, in any manner arising out of
REPERFORMANCE OF THE SERVICES OR TO OBTAIN A REFUND OF THE PRICE
the nuclear incident, whether alleged to be due, in whole or in part by Company or its suppliers.
PAID FOR THE DEFECTIVE SERVICE, ALL AT COMPANY’S OPTION. IN NO EVENT
WILL THE COMPANY'S MAXIMUM LIABILITY EXCEED THE SELLING PRICE FOR 20. NO INDUCEMENTS. The parties hereto represent to each other and each agrees that, neither it
Numerical
59-437
THE PRODUCTS OR ITEM OF SERVICE. nor any person acting on its behalf has, in contravention of any applicable law, given or offered to give,
or will give or offer to give, any sum of money or other material consideration to any person, directly or
12. LIMITATION OF LIABILITY. IN NO EVENT WILL COMPANY BE LIABLE FOR
indirectly, as an inducement to obtain business hereunder or to influence the granting of licenses or
INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES
other governmental permissions to enter into this Agreement or perform obligations hereunder.
INCLUDING, BUT NOT LIMITED TO, LOSS OF USE OF THE PRODUCTS, SERVICE
INTERRUPTION, LOSS OF PROFITS, LOSS OF REVENUE, INTEREST, LOST 21. SEVERABILITY. If any provision of this Agreement is held to be invalid, illegal, or
GOODWILL, WORK STOPPAGE, IMPAIRMENT OF OTHER GOODS, LOSS BY unenforceable under any statute, regulation, ordinance, executive order, or other rule of law, that
REASON OF SHUTDOWN OR NON-OPERATION, INCREASED EXPENSES OF provision will be deemed severed to the extent necessary to comply with such statute, regulation,
OPERATION, OR CLAIMS OF CUSTOMER'S CUSTOMERS, WHETHER BASED ON ordinance, order, or rule. In the event such provision is deemed severed, the parties will negotiate in
CONTRACT, WARRANTY, TORT (INCLUDING, BUT NOT LIMITED TO, STRICT good faith to arrive at an alternative arrangement approximating the original business objective of the
438-1021
Numerical
LIABILITY OR NEGLIGENCE), PATENT INFRINGEMENT, OR OTHERWISE, EVEN IF parties. The remaining terms and conditions of this Agreement will remain in effect.
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 22. NO IMPLIED WAIVER. The failure of either party at any time to require performance by the
13. STATUTE OF LIMITATIONS. NO ACTION ARISING OUT OF ANY CLAIMED other party of any provision of this Agreement will in no way affect the right to require such
BREACH OF THIS AGREEMENT BY COMPANY MAY BE BROUGHT BY CUSTOMER performance at any time thereafter, nor will the waiver of either party of a breach of any provision of
MORE THAN ONE (1) YEAR AFTER THE CAUSE OF ACTION HAS ARISEN. this Agreement constitute a waiver of any succeeding breach of the same or any other provision.
14. CONSUMER PRODUCTS. With respect to “consumer products” as defined under the 23. MISCELLANEOUS. (a) This Agreement does not constitute either party the agent or legal
Magnuson-Moss Warranty Act (“MMWA”), the following statements are made. (a) Some states do representative of the other party. Neither party is authorized to create any obligation on behalf of the
not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to other party including, but not limited to, the obligation for payment of any service or warranty
you. IF ANY IMPLIED WARRANTY IS PROVIDED UNDER THE MMWA, IT IS LIMITED obligation hereunder. (b) Neither this Agreement nor any right or obligation hereunder may be
TO THE DURATION OF THE WARRANTY PROVIDED IN SECTION 10 ABOVE. (b) Some transferred or assigned by either party without the prior written approval of the other party, except that 1152-8190
states do not allow the exclusion or limitation of incidental or consequential damages, so the above Company can transfer or assign this Agreement or any right or obligation (including, but not limited to Numerical
limitation or exclusion may not apply to you. (c) This warranty gives you specific legal rights and you the right to receive payments for any orders) to Ingersoll-Rand Company or an Ingersoll-Rand
may also have other rights which vary from state to state. Company entity without first obtaining Customer’s consent. (c) The rights and remedies herein reserved
to Company will be cumulative and additional to any other or further rights and remedies provided at
15. FORCE MAJEURE. Any delay or failure of Company to perform its obligations hereunder will
law or equity. (d) Customer does not have the right to setoff or to back charge against any amounts
be excused to the extent that it is caused by an event or occurrence beyond its control such as, by way
which become payable to Company under this Agreement or otherwise. (e) The official text of this
of example and not by way of limitation, acts of God, actions by any governmental authority (whether
Agreement is in the English language. If this Agreement is translated into another language, the English
valid or invalid), governmental laws and regulations not presently in effect, fires, floods, windstorms,
text will govern any question with respect to interpretation. (f) The headings in this Agreement are for
explosions, riots, natural disasters, wars, sabotage, accidents, labor problems (including, but not limited
convenience of reference only and do not affect the meaning of this Agreement in any manner.
8200-9340
to, lockouts, strikes, and slowdowns) at Company's facility, its source plant or their suppliers, inability
Numerical
to obtain power, material, labor equipment, or transportation, or court injunction or order. The delivery 24. DEFINITIONS. (a) “Agreement” means Ingersoll-Rand Company, Security Technologies Sector
date will be extended for a time equal to that of the delay and the schedule for Company’s performance Terms and Conditions of Sale and Service. (b) “Company” means Ingersoll-Rand Company, Security
will be deemed adjusted in the individual order(s) to that effect. Technologies Sector. (c) “Customer” means the Buyer. (d) “Buyer” means the purchaser of products
or Services from Company. (e) “U.S.” means United States of America.
11-1/2
Products are shown in four groups; Hinges, Continuous Hinges, Pivots and Architectural Hardware. Each group is
organized in numerical order and no longer in alpha/numerical. Particularly in the Architectural Hardware group, the
HINGES
products are organized by the part number regardless of the prefix or suffix. Example WS33X Wall Stop will be in
numerical sequence of 33; CS115 Crash Stop numerical sequence 115.
For convenience there are a few exceptions where an accessory follows the associated product; example, the COR72
Coordinator is followed by MB1 Mounting Bracket.
CONTINUOUS
HINGES
The service parts section of previous books has been changed. Service parts for many products have been listed with the
product. A full list of available service parts may be obtained from the Ives website. You may also contact your local sales
representative or Ives customer service for more assistance on the availability of service parts.
Model: Column contains model family description and general catalog information
PIVOTS
Substrate: Column contains material substrate information (i.e. aluminum, brass, steel)
Model Number: Column contains the model number and additional prefix for other distinguishing features or packaging
type. Package type prefixes (C, CGC, SC, SP, SPS) descriptions are as follows:
C – Carded
CGC – Commercial Grade Carded
SC – Schlage Branded Card
Numerical
1-059
SP – Slim Pack
SPS – Schlage Branded Slim Pack
Item Number : Item number field is UPC number or sku number, where available.
Weight : Contains the total weight of product in box quantity. Not all weights shown.
Numerical
59-437
Order Quantity : Contains the minimum order quantity for identified product, if required.
HINGES
3CB1 WT . . . . . . .6,7 LG7 . . . . . . . . . . . .23 60 . . . . . . . . . . . . .33 FS444 . . . . . . . . . .43 1020 . . . . . . . .15, 52
3SP1 . . . . . . . . . . . .7 COR7G . . . . . . . . .23 060, . . . . . . . . . . . .33 WS445 . . . . . . . . .43 1021 . . . . . . . .15, 52
5PB1 . . . . . . . . . .8,9 07, . . . . . . . . . . . . .24 COR60 . . . . . . . . . .28 FS446 . . . . . . . . . .43 RL1152 . . . . . . . . 53
5BB1 . . . . . . . . .9,10 COR9G . . . . . . . . .24 061 . . . . . . . . . . . .34 WS447 . . . . . . . . .44 FS1153 . . . . . . . . .53
5BB1 HW . . . . . . . .11 FS9 . . . . . . . . . . . .24 61 . . . . . . . . . . .34-35 FS448 . . . . . . . . . .44 FS1154 . . . . . . . . .53
5BB1 SC . . . . . . . .12 LG10 . . . . . . . . . . .24 FB61 . . . . . . . . . . .35 WS449 . . . . . . . . .44 SB1600M1 . . . . . .53
CONTINUOUS
5BB1 WT . . . . .13,14 CL11 . . . . . . . . . . .24 FB62 . . . . . . . . . . .35 FS450 . . . . . . . . . .44 SB1600M2 . . . . . .53
1010 . . . . . . . .15, 52 LG11 . . . . . . . . . . .24 63 . . . . . . . . . . . . .35 FS452 . . . . . . . . . .44 SB1630 . . . . . . . . .54
HINGES
1011 . . . . . . . .15, 52 WS11 . . . . . . . . . .24 64 . . . . . . . . . . . . .35 SB453 . . . . . . .44-45 SB1640 . . . . . . . . .54
1012 . . . . . . . .15, 52 WS11X . . . . . . . . .25 SR64 . . . . . . . . . . .35 FS455 . . . . . . . . . .45 30X6 . . . . . . . . . . .55
1020 . . . . . . . .15, 52 CL12 . . . . . . . . . . .25 SR65 . . . . . . . . . . .35 FB457 . . . . . . . . . .45 3107 . . . . . . . . . . .56
1021 . . . . . . . .15, 52 LG12 . . . . . . . . . . .25 WS65 . . . . . . . . . .35 FB458 . . . . . . . . . .45 31251 . . . . . . . . . .56
FS13 . . . . . . . . . . .25 066 . . . . . . . . . . . .36 RB470 . . . . . . . . . .45 31252 . . . . . . . . . .56
continuous hinges LG13 . . . . . . . . . . .25 66 . . . . . . . . . . . . .36 RB471 . . . . . . . . . .45 8102 . . . . . . . . . . .60
600 . . . . . . . . . . . .16 CL14 . . . . . . . . . . .25 SR66 . . . . . . . . . . .35 RB472 . . . . . . . . . .45 8103 . . . . . . . . .60-61
PIVOTS
602 . . . . . . . . . . . .16 LG14 . . . . . . . . . . .25 69 . . . . . . . . . . . . .36 481 . . . . . . . . . . . .46 8103EZ . . . . . . . . .61
611 . . . . . . . . . . . .16 FS17 . . . . . . . . . . .25 70 . . . . . . . . . . .36-37 482 . . . . . . . . . . . .46 8105 . . . . . . . . . . .61
700 . . . . . . . . . . . .16 R14 . . . . . . . . . . . .25 71 . . . . . . . . . . . . .37 FS495 . . . . . . . . . .46 8111 . . . . . . . . . . .62
702 . . . . . . . . . . . .16 AS18 . . . . . . . . . . .25 72 . . . . . . . . . . . . .37 FS496 . . . . . . . . . .46 8112 . . . . . . . . . . .62
705 . . . . . . . . . . . .16 FS18 . . . . . . . . . . .25 COR72 . . . . . . . . . .28 FS497 . . . . . . . . . .46 8121 . . . . . . . . . . .62
711 . . . . . . . . . . . .16 FL20 . . . . . . . . . . .28 73 . . . . . . . . . . . . .37 FS544 . . . . . . . . . .46 8190 . . . . . . . . . . .62
715 . . . . . . . . . . . .16 WS20 . . . . . . . . . .25 90 . . . . . . . . . . . . .37 FS555 . . . . . . . . . .46 8200 . . . . . . . . . . .63
045HD . . . . . . . . . .18 WS20X . . . . . . . . .26 CS115 . . . . . . . . . .37 571 . . . . . . . . . . . .47 8302 . . . . . . . . .64-65
Numerical
1-059
046HD . . . . . . . . . .18 CL21 . . . . . . . . . . .26 HB159 . . . . . . . . . .37 572 . . . . . . . . . . . .47 8303 . . . . . . . . .66-67
053HD . . . . . . . . . .18 CL21A . . . . . . . . . .26 218 . . . . . . . . . . . .38 574 . . . . . . . . . . . .48 8305 . . . . . . . . .67-68
054HD . . . . . . . . . .18 22 . . . . . . . . . . . . .26 221 . . . . . . . . . . . .38 575 . . . . . . . . . . . .48 8311 . . . . . . . . . . .69
112HD . . . . . . . . . .18 CL22 . . . . . . . . . . .26 222 . . . . . . . . . . . .38 580 . . . . . . . . . . . .48 8400 . . . . . . . . .70-71
157HD . . . . . . . . . .18 25 . . . . . . . . . . . . .26 223 . . . . . . . . . . . .38 581 . . . . . . . . . .48-49 9100 . . . . . . . . . . .72
210HD . . . . . . . . . .19 026, . . . . . . . . .26-27 227 . . . . . . . . . . . .38 582 . . . . . . . . . . . .49 9103EZ . . . . . . .72-73
224HD . . . . . . . . . .19 RL30 . . . . . . . . . . .27 230 . . . . . . . . . . . .38 585 . . . . . . . . . . . .49 9190 . . . . . . . . .73-74
RL30A . . . . . . . . . .27 253 . . . . . . . . . . . .39 586 . . . . . . . . . . . .49
Numerical
59-437
pivots FB31 . . . . . . . . . . .27 261 . . . . . . . . . . . .39 601 . . . . . . . . . . . .49 hobby hardware
7212 . . . . . . . . . . .20 COR32 . . . . . . . . . .27 262 . . . . . . . . . . . .39 620 . . . . . . . . . . . .50 78 . . . . . . . . . . . . .75
7212V . . . . . . . . . .20 FB32 . . . . . . . . . . .29 265 . . . . . . . . . . . .39 STK685 . . . . . . . . .50 86 . . . . . . . . . . . . .75
7215 . . . . . . . . . . .20 FL32 . . . . . . . . . . .28 325 . . . . . . . . . . . .39 STK685L . . . . . . . .50 9011 . . . . . . . . . . .75
7215F . . . . . . . . . .20 RL32 . . . . . . . . . . .29 326 . . . . . . . . . . . .39 U696 . . . . . . . . . . .50 9031 . . . . . . . . . . .75
7222 . . . . . . . . . . .20 RL32A . . . . . . . . . .29 327 . . . . . . . . . . . .39 698 . . . . . . . . . . . .50 9041 . . . . . . . . . . .75
7226 . . . . . . . . . . .20 FB33 . . . . . . . . . . .29 330 . . . . . . . . . . . .39 700 . . . . . . . . . . . .50 9042 . . . . . . . . . . .75
438-1021
Numerical
7226F . . . . . . . . . .20 WS33 . . . . . . . . . .29 335 . . . . . . . . . . . .39 701 . . . . . . . . . . . .50 9051 . . . . . . . . . . .75
7227 . . . . . . . . . . .20 WS33X . . . . . . . . .29 336 . . . . . . . . . . . .39 VR810DT . . . . . . . .50 9070 . . . . . . . . . . .75
7227F . . . . . . . . . .20 RL36 . . . . . . . . . . .29 345 . . . . . . . . . . . .40 VR814DT . . . . . . . .50 9071 . . . . . . . . . . .75
7230F . . . . . . . . . .20 RL36A . . . . . . . . . .29 347 . . . . . . . . . . . .40 VR810NL . . . . . . . .50 9072 . . . . . . . . . . .75
7237F . . . . . . . . . .20 RL38 . . . . . . . . . . .29 349 . . . . . . . . . . . .40 VR814NL . . . . . . . .50 9110 . . . . . . . . . . .75
7244F . . . . . . . . . .20 40 . . . . . . . . . . .29-30 FB358 . . . . . . . . . .40 VR810NL-V . . . . . .50 9120 . . . . . . . . . . .75
7245F . . . . . . . . . .21 FS40 . . . . . . . . . . .30 SB360 . . . . . . . . . .40 VR814NL-V . . . . . .50 9130 . . . . . . . . . . .75
7253 . . . . . . . . . . .21 WS40 . . . . . . . . . .30 WS401-CVX . . . . .40 AS895 . . . . . . . . . .50 9210 . . . . . . . . . . .75 1152-8190
7255 . . . . . . . . . . .21 FB41 . . . . . . . . . . .30 WS401-CCV . . . . .40 VR900 . . . . . . . . . .51 9220 . . . . . . . . . . .75 Numerical
7255J . . . . . . . . . .21 FS41 . . . . . . . . . . .30 WS402-CVX . . . . .40 VR904 . . . . . . . . . .51 9311 . . . . . . . . . . .75
7256 . . . . . . . . . . .21 42 . . . . . . . . . . . . .30 WS402-CCV . . . . .41 VR900LLP . . . . . . .51 9320 . . . . . . . . . . .75
7259 . . . . . . . . . . .21 COR42 . . . . . . . . . .27 WS404 . . . . . . . . .41 VR904LLP . . . . . . .51 9321 . . . . . . . . . . .75
9110F . . . . . . . . . .21 FB42 . . . . . . . . . . .31 405 . . . . . . . . . . . .41 VR910DT . . . . . . . .51 9330 . . . . . . . . . . .75
FS42 . . . . . . . . . . .31 WS406-CVX . . . . .41 VR914DT . . . . . . . .51 9340 . . . . . . . . . . .75
architectural hardware FS43 . . . . . . . . . . .31 WS406-CCV . . . . .41 VR910NL . . . . . . . .51
8200-9340
HINGES
Z613 US10B Dark Bronze, Oil Rubbed Zinc
Z619 US15 Bright Brass, Clear Coated Zinc
Z625 US26 Bright Chrome Zinc
Z716 Aged Bronze Zinc
Z-W White Zinc
BLK Black Rubber or Plastic
CONTINUOUS
WHT White Rubber or Plastic
HINGES
GRY Grey Rubber
TAN Tan Rubber
BRN Brown Rubber
PIVOTS
Numerical
1-059
Numerical
59-437
438-1021
Numerical
1152-8190
Numerical
8200-9340
Numerical
viii
8200-9340 1152-8190 438-1021 59-437 1-059 HINGES
HINGES
639 10.30 612 36.50 US10 3 24
640 13.70 613 47.00 US10B 3 24
641 13.70 614 47.00 US10A 3 24
643 14.40 616 47.00 US11 3 24
Three Knuckle
Plain Bearing 646 14.40 619 47.00 US15 3 24
Standard Weight 651 13.70 625 49.60 US26 3 24
CONTINUOUS
For use on standard 652 11.40 626 44.40 US26D 3 24
HINGES
weight doors with medium
frequency usage ---- - 629 54.30 US32 3 24
---- - 630 52.20 US32D 3 24
Available in:
Steel w/Steel Pin 4"x4" 600 10.20 ---- ---- USP 3 24
Brass w/Brass Pin
Stainless w/Stainless Pin (102x102mm) 632 15.20 605 52.90 US3 3 24
Non-removable Pin 633 10.80 606 44.10 US4 3 24
(Steel Based 4.5 x 4.5 Hinges 639 11.40 612 41.20 US10 3 24
add $2.00
all others add $5.00 list) 640 15.20 613 52.90 US10B 3 24
PIVOTS
Packed with: 641 15.20 614 52.90 US10A 3 24
Wood and machine screws 15.90 616
643 52.90 US11 3 24
Available options: 646 15.90 619 52.90 US15 3 24
SEC - Security Screws
HT - Hospital tip 651 15.20 625 55.80 US26 3 24
RC - Round corners
SH - Security Studs 652 12.70 626 50.00 US26D 3 24
See page 14 for pricing ---- - 629 61.20 US32 3 24
---- - 630 58.80 3 24
Numerical
US32D
1-059
4.5"x4" 600 5.50 ---- ---- USP 3 24
(114x102mm) 632 11.00 605 30.60 US3 3 24
633 5.50 606 25.50 US4 3 24
639 6.70 612 23.70 US10 3 24
640 9.90 613 30.60 US10B 3 24
641 10.60 614 30.60 US10A 3 24
Numerical
643 11.00 616 3 24
59-437
30.60 US11
646 11.00 619 30.60 US15 3 24
651 11.00 625 32.20 US26 3 24
652 8.80 626 28.80 US26D 3 24
---- - 629 35.30 US32 3 24
---- - 630 34.20 US32D 3 24
4.5"x4.5" 600 5.50 ---- ---- USP 3 24
438-1021
Numerical
(114x114mm) 632 11.00 605 30.60 US3 3 24
633 5.50 606 25.50 US4 3 24
639 6.70 612 23.70 US10 3 24
640 11.00 613 30.60 US10B 3 24
641 11.00 614 30.60 US10A 3 24
643 11.00 616 30.60 US11 3 24
646 11.00 619 31.90 US15 3 24 1152-8190
651 11.00 625 32.20 US26 3 24 Numerical
652 6.70 626 28.80 US26D 3 24
---- ---- 629 35.30 US32 3 24
---- ---- 630 34.20 US32D 3 24
Contact Ives Customer Service for pricing on additional sizes and finishes Bold pricing indicates item is in stock and available for Fast Track
frequency usage
---- ---- 629 82.70 US32 3 24
---- ---- 630 79.50 US32D 3 24
Contact Ives Customer Service for pricing on additional sizes and finishes Bold pricing indicates item is in stock and available for Fast Track
HINGES
639 24.60 612 36.50 US10 3 24
640 32.80 613 47.00 US10B 3 24
641 32.80 614 47.00 US10A 3 24
643 34.20 616 47.00 US11 3 24
Full Mortise 34.20 US15
Three Knuckle 646 619 47.00 3 24
Concealed Bearing 651 32.80 625 49.60 US26 3 24
CONTINUOUS
Standard Weight
652 27.40 626 44.40 US26D 3 24
HINGES
For use on standard
weight doors with medium ---- ---- 629 54.30 US32 3 24
frequency usage ---- ---- 630 52.20 US32D 3 24
Available in: 4"x4" 600 23.50 ---- ---- USP 3 24
Steel w/Steel Pin
Brass w/Brass Pin (102x102mm) 632 35.30 605 52.90 US3 3 24
Stainless w/Stainless Pin 25.00 US4
633 606 44.10 3 24
Non-removable Pin 639 26.40 612 41.20 US10 3 24
(Steel Based 4.5 x 4.5 Hinges
add $2.00 640 35.30 613 52.90 US10B 3 24
PIVOTS
all others add $5.00 list)
641 35.30 614 52.90 US10A 3 24
643 36.70 616 52.90 US11 3 24
Packed with:
Wood and machine screws 646 36.70 619 52.90 US15 3 24
Available options: 651 35.30 625 55.80 US26 3 24
SEC - Security Screws 29.30 US26D
HT - Hospital tip 652 626 50.00 3 24
RC - Round corners ---- ---- 629 61.20 US32 3 24
SH - Security Studs
---- ---- 630 58.80 US32D 3 24
Numerical
TW - Electric Thru Wire
1-059
See page 14 for pricing
4.5"x4" 600 13.20 ---- ---- USP 3 24
(114x102mm) 632 18.70 605 46.60 US3 3 24
633 13.20 606 38.80 US4 3 24
639 14.40 612 36.30 US10 3 24
640 13.20 613 46.60 US10B 3 24
641 13.20 614 46.60 US10A 3 24
Numerical
643 18.70 616 US11 3 24
59-437
46.60
646 20.70 619 46.60 US15 3 24
651 18.70 625 49.20 US26 3 24
652 16.50 626 44.00 US26D 3 24
---- ---- 629 53.90 US32 3 24
---- ---- 630 50.80 US32D 3 24
4.5"x4.5" 600 8.80 ---- ---- USP 3 24
438-1021
Numerical
(114x114mm) 632 18.70 605 51.80 US3 3 24
633 13.20 606 38.80 US4 3 24
639 14.40 612 36.30 US10 3 24
640 18.70 613 51.80 US10B 3 24
641 18.70 614 46.60 US10A 3 24
643 18.70 616 46.60 US11 3 24
646 18.70 619 38.60 US15 3 24 1152-8190
651 18.70 625 49.20 US26 3 24 Numerical
652 11.00 626 44.00 US26D 3 24 NRP also in Fast Track
---- ---- 629 53.90 US32 3 24
---- ---- 630 51.80 US32D 3 24
Contact Ives Customer Service for pricing on additional sizes and finishes Bold pricing indicates item is in stock and available for Fast Track
Contact Ives Customer Service for pricing on additional sizes and finishes Bold pricing indicates item is in stock and available for Fast Track
HINGES
639 36.40 612 55.50 US10 3 24
640 44.90 613 71.30 US10B 3 24
641 44.90 614 71.30 US10A 3 24
643 44.10 616 71.30 US11 3 24
646 46.80 619 55.10 US15 3 24
Full Mortise
Three Knuckle 651 44.10 625 75.40 US26 3 24
CONTINUOUS
Concealed Bearing
Standard Weight 652 37.40 626 67.40 US26D 3 24
HINGES
---- ---- 629 82.50 US32 3 24
For use on standard
weight doors with medium ---- ---- 630 79.40 US32D 3 24
frequency usage
4.5"x4.5" 600 34.20 ---- ---- USP 3 24
Available in: (114x114mm)
Steel w/Steel Pin 632 44.10 605 86.00 US3 3 24
Brass w/Brass Pin 633 34.20 606 59.50 US4 3 24
Stainless w/Stainless Pin
639 36.40 612 55.50 US10 3 24
Non-removable Pin
(Steel Based 4.5 x 4.5 Hinges 640 44.90 613 71.30 US10B 3 24
PIVOTS
add $2.00 641 44.90 614 71.30 US10A 3 24
all others add $5.00 list)
643 44.10 616 71.30 US11 3 24
Packed with:
Wood and machine screws 646 44.10 619 55.10 US15 3 24
Available options: 651 44.10 625 75.40 US26 3 24
SEC - Security Screws 652 37.40 626 67.40 US26D 3 24
HT - Hospital tip
RC - Round corners ---- ---- 629 82.50 US32 3 24
SH - Security Studs
Numerical
TW - Electric Thru Wire ---- ---- 630 79.40 US32D 3 24
1-059
See page 14 for pricing 5"x4.5" 600 39.70 ---- ---- USP 3 24
(127x114mm) 632 51.80 605 97.00 US3 3 24
633 39.70 606 67.80 US4 3 24
639 41.90 612 63.20 US10 3 24
640 51.80 613 81.30 US10B 3 24
641 51.80 614 81.30 US10A 3 24
Numerical
59-437
643 51.80 616 81.30 US11 3 24
646 53.70 619 65.10 US15 3 24
651 51.80 625 85.90 US26 3 24
652 43.00 626 76.90 US26D 3 24
---- ---- 629 94.00 US32 3 24
---- ---- 630 90.40 US32D 3 24
5"x5" 600 39.70 ---- ---- USP 3 24
438-1021
Numerical
(127x127mm) 632 51.80 605 97.00 US3 3 24
633 39.70 606 67.80 US4 3 24
639 41.90 612 63.20 US10 3 24
640 51.80 613 81.30 US10B 3 24
641 51.80 614 81.30 US10A 3 24
643 51.80 616 81.30 US11 3 24
646 53.70 619 65.10 US15 3 24 1152-8190
651 51.80 625 85.90 US26 3 24 Numerical
652 43.00 626 76.90 US26D 3 24
---- ---- 629 94.00 US32 3 24
---- ---- 630 90.40 US32D 3 24
Contact Ives Customer Service for pricing on additional sizes and finishes Bold pricing indicates item is in stock and available for Fast Track
Available options:
SEC - Security Screws 641 169.30 614 ---- US10A 3 24
HT - Hospital tip 176.40
RC - Round corners 643 616 ---- US11 3 24
SH - Security Studs 646 176.40 619 ---- US15 3 24
TW - Electric Thru Wire
See page 14 for pricing 651 169.30 625 ---- US26 3 24
652 141.10 626 ---- US26D 3 24
---- ---- 629 ---- US32 3 24
---- ---- 630 ---- 3 24
Numerical
US32D
1-059
US11
646 186.00 619 ---- US15 3 24
651 178.50 625 ---- US26 3 24
652 148.70 626 ---- US26D 3 24
---- ---- 629 ---- US32 3 24
---- ---- 630 ---- US32D 3 24
5"x7" 600 122.00 ---- ---- USP 3 24
438-1021
Numerical
Contact Ives Customer Service for pricing on additional sizes and finishes Bold pricing indicates item is in stock and available for Fast Track
HINGES
639 147.60 612 ---- US10 3 24
640 196.80 613 ---- US10B 3 24
641 196.80 614 ---- US10A 3 24
Five Knuckle
Ball Bearing 643 205.00 616 ---- US11 3 24
Wide Throw
Standard Weight 646 205.00 619 ---- US15 3 24
651 196.80 625 ---- US26 3 24
CONTINUOUS
For use on standard
weight doors with medium 652 164.00 626 ---- US26D 3 24
HINGES
frequency usage
---- ---- 629 ---- US32 3 24
---- ---- 630 ---- US32D 3 24
4"x4" 600 15.40 ---- ---- USP 3 24
3SP1
(102x102mm) 632 22.00 605 ---- US3 3 24
633 17.70 606 ---- US4 3 24
639 19.90 612 ---- US10 3 24
640 25.40 613 ---- US10B 3 24
PIVOTS
641 24.20 614 ---- US10A 3 24
643 22.00 616 ---- US11 3 24
Spring Hinge 22.00 619 US15 3 24
Standard Weight 646 ----
651 22.00 625 ---- US26 3 24
UL listed
for use on 652 20.90 626 ---- US26D 3 24
fire-rated doors
---- ---- 629 ---- US32 3 24
Available in: ---- ---- 630 US32D 3 24
Numerical
----
Steel w/ Steel Pin
1-059
Stainless w/ Stainless Pin 4.5"x4" 600 15.40 ---- ---- USP 3 24
Packed with: (114x102mm) 632 22.00 605 ---- US3 3 24
Wood and machine screws 17.70 606 US4 3 24
633 ----
Available options: 639 19.90 612 ---- US10 3 24
SEC - Security Screws
RC - Round corners 640 25.40 613 ---- US10B 3 24
See page 14 for pricing
641 24.20 614 ---- US10A 3 24
Numerical
22.00 616 US11 3 24
59-437
643 ----
646 22.00 619 ---- US15 3 24
651 22.00 625 ---- US26 3 24
652 20.90 626 ---- US26D 3 24
---- ---- 629 ---- US32 3 24
---- ---- 630 ---- US32D 3 24
4.5"x4.5" 600 15.40 ---- ---- USP 3 24
438-1021
Numerical
(114x114mm) 632 22.00 605 ---- US3 3 24
633 17.70 606 ---- US4 3 24
639 19.90 612 ---- US10 3 24
640 25.40 613 ---- US10B 3 24
641 24.20 614 ---- US10A 3 24
643 22.00 616 ---- US11 3 24
646 22.00 619 ---- US15 3 24 1152-8190
651 22.00 625 ---- US26 3 24 Numerical
652 20.90 626 ---- US26D 3 24
---- ---- 629 61.20 US32 3 24
---- ---- 630 58.40 US32D 3 24
Contact Ives Customer Service for pricing on additional sizes and finishes Bold pricing indicates item is in stock and available for Fast Track
standard weight
doors with low ---- ---- 629 22.90 US32 3 24
frequency usage ---- ---- 630 22.00 US32D 3 24
Available in: 4"x4" 600 6.10 ---- ---- USP 3 24
Steel w/Steel Pin
Brass w/Brass Pin (102x102mm) 632 9.20 605 22.60 US3 3 24
Stainless w/Stainless Pin 6.40 606
633 18.80 US4 3 24
Non-removable Pin 639 6.90 612 17.60 US10 3 24
(Steel based 4.5 x 4.5 hinges
add $2.00 List 640 9.20 613 22.60 US10B 3 24
PIVOTS
Contact Ives Customer Service for pricing on additional sizes and finishes Bold pricing indicates item is in stock and available for Fast Track
HINGES
639 11.10 612 34.70 US10 3 24
640 14.90 613 44.60 US10B 3 24
641 14.90 614 44.60 US10A 3 24
643 15.50 616 44.60 US11 3 24
Five Knuckle 15.50
Plain Bearing 646 619 44.60 US15 3 24
Standard Weight 651 14.90 625 47.10 US26 3 24
CONTINUOUS
For use on 652 12.40 626 42.10 US26D 3 24
HINGES
standard weight
doors with low ---- ---- 629 51.60 US32 3 24
frequency usage ---- ---- 630 49.60 US32D 3 24
5BB1 3.5"x3.5" 600 7.90 ---- ---- USP 3 24
(89x89mm) 632 11.90 605 28.30 US3 3 24
633 8.40 606 23.60 US4 3 24
639 8.90 612 22.00 US10 3 24
640 11.90 613 28.30 US10B 3 24
PIVOTS
641 11.90 614 28.30 US10A 3 24
643 12.40 616 28.30 US11 3 24
Five Knuckle 12.40 619
Ball Bearing 646 28.30 US15 3 24
Standard Weight 651 11.90 625 30.00 US26 3 24
For use on 652 9.90 626 26.70 US26D 3 24
standard weight
doors with medium ---- ---- 629 32.80 US32 3 24
frequency usage ---- ---- 630 31.50 US32D 3 24
Numerical
1-059
Available in: 4"x4" 600 7.90 ---- ---- USP 3 24
Steel w/Steel Pin
Brass w/Brass Pin (102x102mm) 632 11.90 605 27.60 US3 3 24
Stainless w/Stainless Pin 8.40 606
633 22.90 US4 3 24
Non-removable Pin 639 8.90 612 21.40 US10 3 24
(Steel based 4.5 x 4.5 hinges
add $2.00 List 640 11.90 613 27.60 US10B 3 24
All other add $5.00 List)
641 11.90 614 27.60 US10A 3 24
Numerical
Packed with: 12.40 616 US11 3 24
59-437
643 27.60
Wood and machine screws
646 12.40 619 27.60 US15 3 24
Available options:
SEC - Security Screws 651 11.90 625 29.00 US26 3 24
HT - Hospital tip 9.90 626
RC - Round corners 652 26.00 US26D 3 24
SH - Security Studs ---- ---- 629 31.80 US32 3 24
TW - Electric Thru Wire
See page 14 for pricing ---- ---- 630 30.60 US32D 3 24
4.5"x4" 600 11.00 ---- ---- USP 3 24
438-1021
Numerical
(114x102mm) 632 15.40 605 36.40 US3 3 24
633 11.00 606 27.60 US4 3 24
639 12.20 612 27.60 US10 3 24
640 15.80 613 36.40 US10B 3 24
641 15.80 614 32.80 US10A 3 24
643 15.40 616 32.80 US11 3 24
646 16.50 619 36.40 US15 3 24 1152-8190
651 15.40 625 36.40 US26 3 24 Numerical
652 13.20 626 30.90 US26D 3 24
---- ---- 629 37.90 US32 3 24
---- ---- 630 36.40 US32D 3 24
Contact Ives Customer Service for pricing on additional sizes and finishes Bold pricing indicates item is in stock and available for Fast Track
5BB1 4.5"x4.5" 600 $ 8.80 ---- $ ---- USP 3 24 NRP also in Fast Track
(114x114mm) 632 15.40 605 36.40 US3 3 24
633 9.90 606 27.60 US4 3 24
HINGES
For use on 652 9.90 626 30.90 US26D 3 24 NRP also in Fast Track
standard weight
HINGES
Contact Ives Customer Service for pricing on additional sizes and finishes Bold pricing indicates item is in stock and available for Fast Track
HINGES
639 21.80 612 41.90 US10 3 24
640 29.10 613 53.90 US10B 3 24
641 29.10 614 53.90 US10A 3 24
643 30.30 616 53.90 US11 3 24
Five Knuckle
Plain Bearing 646 30.30 619 53.90 US15 3 24
Standard Weight
651 29.10 625 56.90 US26 3 24
CONTINUOUS
For use on
heavy weight doors 652 24.20 626 50.90 US26D 3 24
HINGES
doors with medium ---- ---- 629 62.20 US32 3 24
frequency usage
---- ---- 630 59.50 US32D 3 24
Available in:
Steel w/Steel Pin 4.5"x4.5" 600 26.40 ---- ---- USP 3 24
Brass w/Brass Pin (114x114mm) 605
Stainless w/Stainless Pin 632 34.20 53.90 US3 3 24
633 27.60 606 44.80 US4 3 24
Non-removable Pin
(Steel based 4.5 x 4.5 hinges 639 28.70 612 41.90 US10 3 24
add $2.00 List
All other add $5.00 List) 640 34.20 613 60.60 US10B 3 24
PIVOTS
641 34.20 614 53.90 US10A 3 24
Packed with:
Wood and machine screws 643 34.20 616 53.90 US11 3 24
Available options: 646 34.20 619 52.90 US15 3 24
SEC - Security Screws 625
HT - Hospital tip 651 34.20 56.90 US26 3 24
RC - Round corners 652 28.70 626 50.90 US26D 3 24
SH - Security Studs
TW - Electric Thru Wire ---- ---- 629 62.20 US32 3 24
See page 14 for pricing
---- ---- 630 59.50 US32D 3 24
Numerical
1-059
5"x4.5" 600 30.90 ---- ---- USP 3 24
(127x114mm) 632 44.10 605 62.60 US3 3 24
633 31.90 606 52.20 US4 3 24
639 33.10 612 48.70 US10 3 24
640 39.70 613 62.60 US10B 3 24
641 39.70 614 62.60 US10A 3 24
Numerical
643 616 US11 3 24
59-437
31.90 62.60
646 31.90 619 62.60 US15 3 24
651 31.90 625 66.10 US26 3 24
652 33.10 626 59.20 US26D 3 24
---- ---- 629 72.40 US32 3 24
---- ---- 630 69.50 US32D 3 24
5"x5" 600 31.80 ---- ---- USP 3 24
438-1021
Numerical
(127x127mm) 632 47.60 605 72.60 US3 3 24
633 33.80 606 60.40 US4 3 24
639 35.80 612 56.50 US10 3 24
640 47.60 613 72.60 US10B 3 24
641 47.60 614 72.60 US10A 3 24
643 49.70 616 72.60 US11 3 24
646 49.70 619 72.60 US15 3 24 1152-8190
651 47.60 625 76.50 US26 3 24 Numerical
652 40.80 626 68.50 US26D 3 24
---- ---- 629 83.80 US32 3 24
---- ---- 630 80.50 US32D 3 24
Contact Ives Customer Service for pricing on additional sizes and finishes Bold pricing indicates item is in stock and available for Fast Track
Packed with:
Square 641 65.00 614 ---- US10A 3 24
Wood and machine screws (5BB1 SC) 643 64.80 616 ---- US11 3 24
Available options: or Beveled 646 64.80 619 ---- US15 3 24
SEC - Security Screws
HT - Hospital tip (5BB1 BSC) 651 62.20 625 ---- US26 3 24
RC - Round corners Edge 652 51.80 626 ---- US26D 3 24
SH - Security Studs
TW - Electric Thru Wire ---- ---- 629 ---- US32 3 24
See page 14 for pricing
Numerical
RC - Round corners
SH - Security Studs (5BB1 HWBSC) 651 75.40 625 ---- US26 3 24
TW - Electric Thru Wire Edge 652 62.80 626 ---- US26D 3 24
See page 14 for pricing
---- ---- 629 ---- US32 3 24
---- ---- 630 ---- US32D 3 24
Contact Ives Customer Service for pricing on additional sizes and finishes Bold pricing indicates item is in stock and available for Fast Track
HINGES
639 14.90 612 ---- US10 3 24
640 19.90 613 ---- US10B 3 24
Five Knuckle 641 19.90 614 ---- US10A 3 24
Ball Bearing
Wide Throw 643 20.70 616 ---- US11 3 24
Standard Weight 646 20.70 619 ---- US15 3 24
For use on 651 19.90 625 ---- US26 3 24
CONTINUOUS
standard weight
doors with medium 652 16.50 626 ---- US26D 3 24
HINGES
frequency usage
---- ---- 629 ---- US32 3 24
Available in: ---- ---- 630 ---- US32D 3 24
Steel w/Steel Pin
4.5"x6" 600 35.30 ---- ---- USP 3 24
Non-removable Pin
(add $5.00 List) (114x152mm) 632 52.90 605 ---- US3 3 24
633 37.40 606 ---- US4 3 24
Packed with:
Wood and machine screws 639 39.70 612 ---- US10 3 24
Available options: 640 52.90 613 ---- US10B 3 24
PIVOTS
SEC - Security Screws
HT - Hospital tip 641 52.90 614 ---- US10A 3 24
RC - Round corners 643 55.10 616 ---- US11 3 24
SH - Security Studs
TW - Electric Thru Wire 646 55.10 619 ---- US15 3 24
See page 14 for pricing
651 52.90 625 ---- US26 3 24
652 44.10 626 ---- US26D 3 24
---- ---- 629 ---- US32 3 24
---- ---- 630 US32D 3 24
Numerical
----
1-059
5"x6" 600 47.60 ---- ---- USP 3 24
(127x152mm) 632 71.30 605 ---- US3 3 24
633 50.50 606 ---- US4 3 24
639 53.60 612 ---- US10 3 24
640 71.30 613 ---- US10B 3 24
641 71.30 614 ---- US10A 3 24
Numerical
74.40 616 US11 3 24
59-437
643 ----
646 74.40 619 ---- US15 3 24
651 71.30 625 ---- US26 3 24
652 59.50 626 ---- US26D 3 24
---- ---- 629 ---- US32 3 24
---- ---- 630 ---- US32D 3 24
5"x7" 600 47.60 ---- ---- USP 3 24
438-1021
Numerical
(127x178mm) 632 71.30 605 ---- US3 3 24
633 50.50 606 ---- US4 3 24
639 53.60 612 ---- US10 3 24
640 71.30 613 ---- US10B 3 24
641 71.30 614 ---- US10A 3 24
643 74.40 616 ---- US11 3 24
646 74.40 619 ---- US15 3 24 1152-8190
651 71.30 625 ---- US26 3 24 Numerical
652 59.50 626 ---- US26D 3 24
---- ---- 629 ---- US32 3 24
---- ---- 630 ---- US32D 3 24
Contact Ives Customer Service for pricing on additional sizes and finishes Bold pricing indicates item is in stock and available for Fast Track
standard weight
doors with medium 652 59.50 626 ---- US26D 3 24
HINGES
Electric Hinges
4-Wire 8-Wire Electrified Hinges
4-Wire (TW4 Suffix)
8-Wire (TW8 Suffix)
Monitor (MON Suffix)
Through-Wire with monitor (TW4M Suffix or TW8M)
Numerical
59-437
Contact Ives Customer Service for pricing on additional sizes and finishes Bold pricing indicates item is in stock and available for Fast Track
MODEL SUBSTRATE MODEL NUMBER BHMA FINISH WEIGHT ORDER QTY BOX QTY LIST PRICE
HINGES
Square Corner SC3P1010F-619E – 3 3 21.30
SC3P1010F-620E – 3 3 21.30
SC3P1010F-716E – 3 3 18.40
1011F-605E 632 2 6.10
1011* Steel
1011F-619E 638 2 6.10
Residential Hinge 3.5”
1011F-625E – 2 6.10
CONTINUOUS
5/8” Radius Corner
1011F-716E – 2 6.10
HINGES
SC3P1011F-605E 632 3 3 17.80
SC3P1011F-609E 638 3 3 21.30
SC3P1011F-619E – 3 3 21.30
SC3P1011F-620E – 3 3 21.30
SC3P1011F-716E – 3 3 21.30
1012* Steel SC3P1012F-605E 632 3 3 17.80
Residential Hinge 3.5” SC3P1012F-609E 638 3 3 21.30
PIVOTS
1/4” Radius Corner SC3P1012F-619E – 3 3 21.30
SC3P1012F-716E – 3 3 21.30
SC3P1020F-605E 632 3 3 21.30
1020* Steel
Residential Hinge 4” SC3P1020F-609E 638 3 3 22.90
Square Corner SC3P1020F-619E – 3 3 22.90
SC3P1020F-620E – 3 3 22.90
SC3P1020F-716E – 3 3 22.90
Steel SC3P1021F-605E 632 3 3 21.30
Numerical
1021*
1-059
Residential Hinge 4” SC3P1021F-609E 638 3 3 22.90
5/8” Radius Corner SC3P1021F-619E – 3 3 22.90
SC3P1021F-620E – 3 3 22.90
SC3P1021F-716E – 3 3 22.90
* Note: SC3P (3 pack hinges) must be ordered in multiples of 3. Qty of 3 equals 9 hinges.
Numerical
59-437
438-1021
Numerical
1152-8190
Numerical
8200-9340
Numerical
Bold pricing indicates item is in stock and available for Fast Track
Contact Ives Customer Service for pricing on additional sizes and finishes Bold pricing indicates item is in stock and available for Fast Track
HINGES
HINGES
Custom Processing*
Custom cut to length $16.00 List add per hinge
Custom painting Contact Customer Service for pricing and color approval. Additional lead time up to
6 weeks may be needed
Dutch Door Prep $100.00 List add per hinge
Hospital Tips $100.00 List add per hinge
CONTINUOUS
* Return Policy - requires prior approval, consult factory
HINGES
Electrical Modifications
Electrical Power Transfer (EPT) prep $85.00 List add per hinge
PIVOTS
Security Screws $27.00 List add per hinge
Wood Screws $16.00 Per pack
Thread Forming Screws $16.00 Per pack
No Charge Adds:
1/2 wood / 1/2 machine Specify HWHM
Thread Forming Screws, Specify HM (recommended for grouted frames)
Numerical
1-059
Pilot holes required
Numerical
59-437
438-1021
Numerical
1152-8190
Numerical
8200-9340
Numerical
Contact Ives Customer Service for pricing on additional sizes and finishes Bold pricing indicates item is in stock and available for Fast Track
Contact Ives Customer Service for pricing on additional sizes and finishes Bold pricing indicates item is in stock and available for Fast Track
HINGES
HINGES
210 Heavy Duty 95" 628 257.60
Full Surface 120" 628 441.00
Swing Clear
1/32" Inset 313AN 83" 710 249.10
Non Handed 85" 710 249.10
95" 710 307.40
120" 710 485.50
CONTINUOUS
US28 83" 628 151.60
224HD
HINGES
UL Listed 85" 628 151.60
224 Heavy Duty 95" 628 186.60
Full Mortise 120" 628 293.60
1/16" Inset 83"
313AN 710 188.70
Non Handed
85" 710 188.70
95" 710 239.60
120" 710 376.30
PIVOTS
Geared Hinges - Additional Offerings
Custom Processing*
Custom cut to length $16.00 List add per hinge
Numerical
Custom painting and anodized colors Contact Customer Service for pricing and color approval. Additional lead time up to
1-059
6 weeks may be needed
* Return Policy - requires prior approval, consult factory
Electrical Modifications
Electrical Power Transfer (EPT) prep $85.00 List add per hinge
Numerical
59-437
Electric Through-Wire (TW8 Standard) $260.00 List add per hinge
438-1021
Numerical
No Charge Adds:
1/2 wood / 1/2 machine Specify HWHM
Thread Forming Screws, Specify HM (recommended for grouted frames)
Pilot holes required
Contact Ives Customer Service for pricing on additional sizes and finishes Bold pricing indicates item is in stock and available for Fast Track
MODEL
PART
DESCRIPTION
POUND
RATING
BOX
QTY US3 US4 US10 US10B
*US32
US26
*US32D
US26D
SP28 SP10 SPBLK SP313 SP4
7212 7212 SET 200 1 $322.00 $322.00 $322.00 $322.00 $322.00 $294.00 $187.00 $187.00 $187.00 $187.00 $187.00
3/4” Offset Pivot 7212 TOP - 1 187.00 187.00 187.00 187.00 187.00 161.00 114.00 114.00 114.00 114.00 114.00
HINGES
HINGES
7212 BTM 200 1 196.00 196.00 196.00 196.00 196.00 168.00 128.00 128.00 128.00 128.00 128.00
7212 INT 100 1 215.00 215.00 215.00 215.00 215.00 187.00 148.00 148.00 148.00 148.00 148.00
7212V 7212V SET 200 1 335.00 335.00 335.00 335.00 335.00 308.00 255.00 255.00 255.00 255.00 255.00
3/4" Offset Pivot, 7212V TOP - 1 196.00 196.00 196.00 196.00 196.00 168.00 128.00 128.00 128.00 128.00 128.00
Jamb Mount 7212V BTM 200 1 196.00 196.00 196.00 196.00 196.00 168.00 128.00 128.00 128.00 128.00 128.00
7212V INT 100 1 215.00 215.00 215.00 215.00 215.00 187.00 148.00 148.00 148.00 148.00 148.00
CONTINUOUS
7215 7215 SET 500 1 348.00 348.00 348.00 348.00 348.00 322.00 281.00 281.00 281.00 281.00 281.00
HINGES
3/4" Offset Pivot 7215 TOP - 1 187.00 187.00 187.00 187.00 187.00 161.00 114.00 114.00 114.00 114.00 114.00
7215 BTM 500 1 215.00 215.00 215.00 215.00 215.00 201.00 219.00 219.00 219.00 219.00 219.00
7215 INT 100 1 196.00 196.00 196.00 196.00 196.00 174.00 161.00 161.00 161.00 161.00 161.00
7215PT INT - 1 691.00 691.00 691.00 691.00 691.00 536.00 502.00 502.00 502.00 502.00 502.00
7215F SET 500 1 549.00 549.00 549.00 521.00 428.00 428.00 428.00 428.00 428.00
7215F
Fire Rated 7215F TOP - 1 329.00 329.00 329.00 289.00 241.00 241.00 241.00 241.00 241.00
3/4" Offset Pivot 7215F BTM 500 1 383.00 383.00 383.00 355.00 281.00 281.00 281.00 281.00 281.00
PIVOTS
7215F INT 100 1 308.00 308.00 308.00 294.00 249.00 249.00 249.00 249.00 249.00
7222 SET 200 1 281.00 281.00 281.00 281.00 281.00 255.00 187.00 187.00 187.00 187.00 187.00
7222
3/4" Offset Pivot 7222 TOP - 1 187.00 187.00 187.00 187.00 187.00 161.00 114.00 114.00 114.00 114.00 114.00
7222 BTM 200 1 182.00 182.00 182.00 182.00 182.00 155.00 108.00 108.00 108.00 108.00 108.00
7222 INT 100 1 215.00 215.00 215.00 215.00 215.00 187.00 148.00 148.00 148.00 148.00 148.00
7226 SET 600 1 335.00 335.00 335.00 335.00 335.00 308.00 241.00 241.00 241.00 241.00 241.00
7226
Numerical
3/4" Offset Pivot 7226 TOP - 1 187.00 187.00 187.00 187.00 187.00 161.00 114.00 114.00 114.00 114.00 114.00
1-059
7226 BTM 600 1 201.00 201.00 201.00 201.00 201.00 187.00 168.00 168.00 168.00 168.00 168.00
7226 INT 100 1 196.00 196.00 196.00 196.00 196.00 174.00 161.00 161.00 161.00 161.00 161.00
7226PT INT - 1 691.00 691.00 691.00 691.00 691.00 536.00 502.00 502.00 502.00 502.00 502.00
7226F SET 600 1 482.00 482.00 482.00 456.00 388.00 388.00 388.00 388.00 388.00
7226F
Fire Rated 7226F TOP - 1 329.00 329.00 329.00 289.00 241.00 241.00 241.00 241.00 241.00
3/4" Offset Pivot 7226F BTM 600 1 342.00 342.00 342.00 294.00 276.00 276.00 276.00 276.00 276.00
Numerical
59-437
7226F INT 600 1 308.00 308.00 308.00 294.00 249.00 249.00 249.00 249.00 249.00
7227 SET 700 1 563.00 563.00 563.00 563.00 563.00 536.00 469.00 469.00 469.00 469.00 469.00
7227
3/4" Offset Pivot 7227 TOP - 1 187.00 187.00 187.00 187.00 187.00 161.00 114.00 114.00 114.00 114.00 114.00
7227 BTM 700 1 509.00 509.00 509.00 509.00 509.00 456.00 422.00 422.00 422.00 422.00 422.00
7227 INT 100 1 196.00 196.00 196.00 196.00 196.00 174.00 161.00 161.00 161.00 161.00 161.00
7227PT INT - 1 691.00 691.00 691.00 691.00 691.00 536.00 502.00 502.00 502.00 502.00 502.00
7227F SET 700 1 709.00 709.00 709.00 682.00 602.00 602.00 602.00 602.00 602.00
438-1021
7227F
Numerical
Fire Rated 7227F TOP - 1 329.00 329.00 329.00 289.00 241.00 241.00 241.00 241.00 241.00
3/4" Offset Pivot 7227F BTM 700 1 509.00 509.00 509.00 456.00 422.00 422.00 422.00 422.00 422.00
7227F INT 100 1 308.00 308.00 308.00 294.00 249.00 249.00 249.00 249.00 249.00
7230F 7230F SET 1000 1 602.00 602.00 602.00 575.00 509.00 509.00 509.00 509.00 509.00
Fire Rated 7230F TOP - 1 308.00 308.00 308.00 289.00 249.00 249.00 249.00 249.00 249.00
3/4" Offset Pivot 7230F BTM 1000 1 369.00 369.00 369.00 355.00 315.00 315.00 315.00 315.00 315.00
1152-8190
7230F INT 100 1 335.00 335.00 335.00 322.00 276.00 276.00 276.00 276.00 276.00
Numerical
7237F SET 1750 1 736.00 736.00 736.00 709.00 643.00 643.00 643.00 643.00 643.00
7237F
Fire Rated 7237F TOP - 1 308.00 308.00 308.00 289.00 249.00 249.00 249.00 249.00 249.00
3/4" Offset 7237F BTM 1750 1 509.00 509.00 509.00 495.00 462.00 462.00 462.00 462.00 462.00
7237F INT 100 1 335.00 335.00 335.00 322.00 276.00 276.00 276.00 276.00 276.00
7244F SET 400 1 623.00 623.00 623.00 602.00 521.00 521.00 521.00 521.00 521.00
7244F
Fire Rated 7244F TOP - 1 335.00 335.00 335.00 315.00 289.00 289.00 289.00 289.00 289.00
8200-9340
400 362.00 362.00 362.00 342.00 294.00 294.00 294.00 294.00 294.00
7244F INT 100 1 362.00 362.00 362.00 342.00 302.00 302.00 302.00 302.00 302.00
* Fire rated models US32 and US32D (stainless), all others US26 and US26D (brass)
Contact Ives Customer Service for pricing on additional sizes and finishes Bold pricing indicates item is in stock and available for Fast Track
MODEL
PART
DESCRIPTION
POUND
RATING
BOX
QTY US3 US4 US10 US10B
*US32
US26
*US32D
US26D
SP28 SP10 SPBLK SP313 SP4 USP
7245F 7245FSET 500 1 $803.00 $ $803.00 $ $803.00 $776.00 $709.00 $709.00$709.00 $709.00 $709.00 $
Fire Rated 7245F TOP - 1 335.00 335.00 335.00 315.00 289.00 289.00 289.00 289.00 289.00
HINGES
HINGES
1-1/2" Offset Pivot 7245F BTM 500 1 563.00 563.00 563.00 549.00 495.00 495.00 495.00 495.00 495.00
7245FINT 100 1 362.00 362.00 362.00 342.00 302.00 302.00 302.00 302.00 302.00
7253 7253SET 300 1 255.00 255.00 255.00 255.00 255.00 255.00 222.00 222.00 222.00 222.00 222.00
1-1/2" Offset Pivot 7253 TOP - 1 155.00 155.00 155.00 155.00 155.00 155.00 141.00 141.00 141.00 141.00 141.00
Center Hung 1 141.00 141.00 141.00 141.00 141.00 122.00 102.00 102.00 102.00 102.00 102.00
7253 BTM 300
CONTINUOUS
7255 7255SET 500 1 281.00 281.00 281.00 281.00 281.00 281.00 262.00 262.00 262.00 262.00 262.00
1-1/2 Offset Pivot 7255 TOP - 1 155.00 155.00 155.00 155.00 155.00 155.00 141.00 141.00 141.00 141.00 141.00
HINGES
Center Hung 1 161.00 161.00 161.00 161.00 161.00 161.00 155.00 155.00 155.00 155.00 155.00
7255 BTM 500
7255J 7255JSET 600 1 281.00 281.00 281.00 281.00 281.00 281.00 262.00 262.00 262.00 262.00 262.00
1-1/2 Offset Pivot 7255J TOP - 1 155.00 155.00 155.00 155.00 155.00 155.00 141.00 141.00 141.00 141.00 141.00
Center Hung 1 161.00 161.00 161.00 161.00 161.00 161.00 155.00 155.00 155.00 155.00 155.00
7255J BTM 500
7256 7256SET 600 1 469.00 469.00 469.00 469.00 469.00 442.00 422.00 422.00 422.00 422.00 422.00
1 1/2" Offset Pivot 7256 TOP - 1 155.00 155.00 155.00 155.00 155.00 155.00 141.00 141.00 141.00 141.00 141.00
Center Hung
PIVOTS
7256 BTM 600 1 383.00 383.00 383.00 383.00 383.00 362.00 342.00 342.00 342.00 342.00 342.00
7259 7259SET 1000 1 843.00 843.00 843.00 843.00 843.00 815.00 789.00 789.00 789.00 789.00 789.00
1 1/2" Offset Pivot 7259 TOP - 1 329.00 329.00 329.00 329.00 329.00 281.00 235.00 235.00 235.00 235.00 235.00
Center Hung 1 696.00 696.00 696.00 696.00 696.00 669.00 649.00 649.00 649.00 649.00 649.00
7259 BTM 1000
91105F 91105F 90 1 378.00 378.00 378.00 343.00 343.00 343.00
Pocket Pivot E91105F 90 1 868.00 868.00 868.00 833.00 833.00 833.00
E = Power Transfer
Numerical
1-059
* Fire rated models US32 and US32D (stainless), all others US26 and US26D (brass)
Suffix Descriptions
BTM - Bottom Only
F - Fire Rated
INT - Intermediate Pivot Only
Numerical
PT - Power Transfer
59-437
SET - Top and Bottom Pivot
TOP - Top Only
V - Vertical Side Mount
Weather Resistant (WP) bearings available for 7215 26D and 7215F 32D bottom pivots at $60 list add. Consult factory for lead time.
438-1021
Numerical
1152-8190
Numerical
8200-9340
Numerical
Bold pricing indicates item is in stock and available for Fast Track
Bold pricing indicates item is in stock and available for Fast Track
HINGES
CB1 US10B 613 40.10
CB1 US26 625 40.10
CB1 US26D 626 40.10
CB1 SPBLK 693 26.20
Brass DP1 US3 605 22.30
DP1
Dust Proof Strike DP1 US4 606 22.30
CONTINUOUS
Threshold Only DP1 US10 612 22.30
HINGES
DP1 US10B 613 22.30
DP1 US26 625 22.30
DP1 US26D 626 22.30
Steel LG1 USP 600 18.30
LG1
Lock Guard LG1 US2G 604 14.90
with Security Pin Frame LG1 SP313 695 17.20
Brass LG1 US4 606 37.90
PIVOTS
LG1 US10 612 37.90
Stainless LG1 US32D 630 34.40
MB1 See page 28
Mounting Bracket
Brass DP2 US3 605 28.10
DP2
Dust Proof Strike DP2 US4 606 28.10
Numerical
Floor and /or Threshold DP2 US10 612 28.10
1-059
DP2 US10B 613 28.10
DP2 US26 625 28.10
DP2 US26D 626 28.10
MB2 See page 28
Mounting Bracket
Aluminum 2A3 666 0.9 20 3.40
2
Numerical
59-437
Elbow Cabinet Catch 2A5 – 0.9 20 3.70
2A14 669 0.9 20 3.70
2A15 670 0.9 20 3.70
2A92 673 0.9 20 3.40
2A-716 – 0.9 20 3.70
SP2A3 666 1.5 25 25 3.40
SP2A14 669 1.5 25 25 3.70
438-1021
Numerical
SP2A92 673 1.5 25 25 3.40
MB3 See page 28
Mounting Bracket
Bold pricing indicates item is in stock and available for Fast Track
COR9G
1-059
Floor Stop
FS9 US10 612 168.20
FS9 US10B 613 168.20
FS9 US26 625 168.20
FS9 US26D 626 144.10
LG10 Stainless LG10 US32D 630 32.10
Lock Guard Steel LG10 USP 600 21.70
438-1021
Numerical
Bold pricing indicates item is in stock and available for Fast Track
HINGES
WS11X US10B 613 39.60
WS11X US26 625 39.60
WS11X US26D 626 38.50
CL12 Brass CL12 US3 605 42.00
Cabinet Latch CL12 US4 606 37.20
CL12 US10 612 37.20
CONTINUOUS
CL12 US26D 626 37.20
HINGES
LG12 Stainless LG12 US32D 630 29.80
Lock Guard Steel LG12 USP 600 21.70
FS13 Brass FS13 US3 605 6.70
Floor Dome Stop FS13 US4 606 8.10
1” height
FS13 US10 612 8.20
FS13 US10B 613 8.20
FS13 US26 625 8.10
PIVOTS
FS13 US26D 626 6.70
LG13 Stainless LG13 US32D 630 28.70
Lock Guard Steel LG13 USP 600 18.90
CL14 Brass CL14 US3 605 37.20
Cabinet Latch CL14 US4 606 31.20
CL14 US10 612 31.20
CL14 US26D 626 31.20
Numerical
1-059
LG14 Stainless LG14 US32D 630 47.00
Lock Guard
FS17 Brass FS17 US3 605 7.60
Floor Dome Stop FS17 US4 606 9.00
1-11/32” height FS17 US10 612 9.20
FS17 US10B 613 9.20
Numerical
FS17 US26 625 9.00
59-437
FS17 US26D 626 7.60
R14 Steel R14 US3 605 5.70
Riser R14 US4 606 5.70
For FS13 and FS17 R14 US10 612 6.30
Dome Stops 5/16” Height
R14 US10B 613 6.30
R14 US26 625 6.30
438-1021
Numerical
R14 US26D 626 7.50
AS18 Brass AS18 US3 605 44.40
Applied Stop AS18 US4 606 40.90
AS18 US10 612 40.90
AS18 US10B 613 44.40
AS18 US26 625 44.40
AS18 US26D 626 44.40 1152-8190
FS18 Steel/ FS18S – 48.20 Numerical
Security Floor or Wall Stop Rubber FS18L – 51.60
Bold pricing indicates item is in stock and available for Fast Track
22B26 044074 20
22B26D 626 1.110827 9
044074 20 3.10
SP22B3 605 2.014619 8
S00030 25 25 2.70
Aluminum 25A3 666 1.207460 4
044074 20 1.50
25
Screen Door Pull 25A92 673 1.207461 1
044074 20 1.50
25A-BLK – 1.207547 2
044074 20 2.10
25A-W – 1.207501 4
044074 20 2.10
Numerical
59-437
Bold pricing indicates item is in stock and available for Fast Track
HINGES
026B26D 626 10 8.70
026B-716 – 10 9.00
SP026B26 625 10 10 8.90
SPS026B-605 605 20 20 7.50
SPS026B-609 609 20 20 8.90
CONTINUOUS
SPS026B-619 619 20 20 8.90
SPS026B-620 620 20 20 8.90
HINGES
SPS026B-716 – 20 20 8.90
Brass RL30 US3 605 59.00
RL30
Nylon Roller RL30 US4 606 50.20
RL30 US10 612 52.20
RL30 US10B 613 61.20
RL30 US26 625 59.00
PIVOTS
RL30 US26D 626 55.70
Brass RL30-A US3 605 66.00
RL30A
Nylon Roller RL30-A US4 606 57.30
w/ASA Stike RL30-A US10 612 59.50
RL30-A US10B 613 68.60
RL30-A US26 625 66.00
RL30-A US26D 626 62.80
Numerical
1-059
Steel FB31P-12-MD US3 605 158.80
FB31 FB31P-12-MD US4 606 158.80
Automatic Flush Bolts,
Metal Doors FB31P-12-MD US10 612 158.80
UL 3 Hour FB31P-12-MD US10B 613 158.80
Top and Bottom Bolt Stainless FB31P-12-MD US32 629 158.80
Numerical
P=Pair
59-437
T=Top Bolt Only FB31P-12-MD US32D 630 158.80
B=Bottom Bolt Only Brass FB31T-12-MD US3 605 83.80
Optional Rod Lengths FB31T-12-MD US4 606 83.80
Available
18", 24", 36", 48" FB31T-12-MD US10 612 83.80
4.20 List Add FB31T-12-MD US10B 613 83.80
Stainless FB31T-12-MD US32 629 83.80
438-1021
FB31T-12-MD US32D 630 83.80
Numerical
Brass FB31B-12-MD US3 605 83.80
FB31B-12-MD US4 606 83.80
FB31B12-MD US10 612 83.80
FB31B-12-MD US10B 613 83.80
Stainless FB31B-12-MD US32 629 83.80
FB31B-12-MD US32D 630 83.80
1152-8190
Numerical
Aluminum COR32 US28 628 128.90
COR32*
Door Coordinator COR32 315AN 711 168.50
32” Channel Length COR32 US26D 713 249.80
UL Listed COR32 US28w/FL20 628 141.10
Aluminum COR42 US28 628 138.70
COR42*
Door Coordinator COR42 315AN 711 179.40
42” Channel Length COR42 US26D 713 265.50
8200-9340
Numerical
* Special factory preparation for use with vertical rod exit devices available. Add $110 List. Bold pricing indicates item is in stock and available for Fast Track
Aluminum
1-059
* Special factory preparation for use with vertical rod exit devices available. Add $110 List. Bold pricing indicates item is in stock and available for Fast Track
HINGES
Fire Latch Stainless FB32-12-MD US32 629 158.80
FB32-12-MD US32D 630 158.80
COR32* See page 27
Door Coordinator
FL32 Brass
Filler Bar See page 28
CONTINUOUS
RL32 RL32 US3 605 79.80
HINGES
Nylon Roller RL32 US4 606 75.40
RL32 US10 612 78.30
RL32 US10B 613 82.80
RL32 US26D 626 75.40
RL32 US26 625 79.80
RL32A Brass RL32-A US3 605 86.80
PIVOTS
Nylon Roller RL32-A US4 606 82.50
w/ASA Strike RL32-A US10 612 85.60
RL32-A US10B 613 90.20
RL32-A US26 625 86.80
RL32-A US26D 626 82.50
FB33 Brass FB33-12-MD US3 605 164.00
Top Auto Flush Bolt FB33-12-MD US4 606 164.00
Numerical
w/Auxillary
1-059
FB33-12-MD US10 612 164.00
Fire Latch
Retrofit Plate FB33-12-MD US10B 613 164.00
Stainless FB33-12-MD US32 629 164.00
FB33-12-MD US32D 630 164.00
WS33 Brass WS33 US26D 626 62.50
Wall Stop
For Drywall Mounting
Numerical
59-437
WS33X Brass WS33X US26D 626 68.40
Wall Stop
For Masonary Mounting
438-1021
Roller Latch Surface Mount
Numerical
Aluminum 40A-716 3 IN – 10 6.30
40
Modern Surface Bolt 40PA28 3 IN 628 10 6.30
Packed with Universal SC40A3 3 IN 666 5 5 7.20
and Mortise Strike
SC40A15 3 IN 670 5 5 7.80
SC40A-716 3 IN – 5 5 7.80
Brass 40B3 3 IN 605 1.9 10 13.80
1152-8190
Numerical
40B5 3 IN 609 1.9 10 13.80
40B10B 3 IN 613 1.9 10 14.50
40B15 3 IN 619 1.9 10 13.80
40B26 3 IN 625 1.9 10 14.50
40B26D 3 IN 626 1.9 10 14.50
Aluminum 40PA28 4 IN 628 0.9 10 7.00
Brass 40B3 4 IN 605 2.4 10 14.50
8200-9340
Numerical
* Special factory preparation for use with vertical rod exit devices available. Add $110 List. Bold pricing indicates item is in stock and available for Fast Track
P=Pair
T=Top Bolt Only FB41P-WD US32D 630 166.00
B=Bottom Bolt Only Brass FB41T-WD US3 605 87.00
FB41T-WD US4 606 87.00
FB41T-WD US10 612 87.00
FB41T-WD US10B 613 87.00
Stainless FB41T-WD US32 629 87.00
Numerical
59-437
Bold pricing indicates item is in stock and available for Fast Track
HINGES
w/ Auxilary Fire Latch Stainless FB42-WD US32 629 167.60
FB42-WD US32D 630 167.60
Brass FS42 US3 605 88.80
FS42
Automatic Floor FS42 US4 606 71.00
Type Holder FS42 US10 612 88.80
Floor Clearance
FS42 US10B 613 88.80
CONTINUOUS
1-1/8” to 1-9/16”
FS42 US26 625 88.80
HINGES
FS42 US26D 626 71.00
Brass FS43 US3 605 97.80
FS43
Automatic Floor FS43 US4 606 80.00
Type Holder FS43 US10 612 97.80
Floor Clearance
FS43 US10B 613 97.80
1-5/8” to 2-11/16”
FS43 US26 625 97.80
FS43 US26D 626 80.00
PIVOTS
FL44 See page 28
Filler Bar
Brass WS45 US3 605 126.90
WS45
Wall Stop WS45 US4 606 126.90
For Drywall Mounting WS45 US10 612 126.90
WS45 US10B 613 126.90
Numerical
WS45 US26 625 126.90
1-059
WS45 US26D 626 123.80
Aluminum WS45 US28 628 99.80
Brass WS45X US3 605 134.20
WS45X
Wall Stop WS45X US4 606 134.20
For Masonary Mounting WS45X US10 612 134.20
WS45X US10B 613 134.20
Numerical
59-437
WS45X US26 625 134.20
WS45X US26D 626 131.00
Aluminum WS45X US28 628 107.10
Brass S48B3 605 2.6 10 15.10
S48
Mortise Bolt S48B5 609 2.6 10 18.10
S48B10B 613 2.6 10 17.40
S48B15 619 2.6 10 16.60
438-1021
Numerical
S48B26 625 2.6 10 17.40
S48B26D 626 2.6 10 17.40
09-40-605 605 1 1 4.30
S48
Strike Package 09-40-613 613 1 1 4.30
09-40-626 626 1 1 4.30
Brass FB51P-12-MD US3 605 158.80
FB51
FB51P-12-MD US4 606 158.80 1152-8190
Numerical
UL 3 Hour
Constant Latching Top FB51P-12-MD US10 612 158.80
and Automatic
FB51P-12-MD US10B 613 158.80
Bottom Bolt, Metal Door
Stainless FB51P-12-MD US32 629 158.80
P=Pair FB51P-12-MD US32D 630 158.80
T=Top Bolt Only
Brass FB51T-12-MD US3 605 82.80
B=Bottom Bolt Only
FB51T-12-MD US4 606 82.80
8200-9340
Numerical
**Zinc substrate, narrow base Bold pricing indicates item is in stock and available for Fast Track
HINGES
59A10B 640 3.2 10 5.20
59A14 645 2.1 10 3.70
59A15 646 2 10 3.70
59A92 673 3.2 10 3.10
59A-716 – 2 10 3.70
CONTINUOUS
SP59A3 666 3 15 15 3.10
HINGES
SP59A5 – 3 15 15 3.70
SP59A14 645 3 15 15 3.70
SP59A92 673 3 15 15 3.10
Brass 59B3 605 3.8 10 18.00
59B5 609 3.8 10 20.70
59B15 619 3.8 10 20.70
59B26 625 3.8 10 20.70
PIVOTS
59B26D 626 3.8 10 20.70
59B-716 – 3.8 10 20.70
SP59B3 605 4.1 10 10 18.00
060 Steel 060F3 632 1.1 20 1.00
Flexible Door Stop 060F5 638 1.1 20 1.00
3” Projection 060F10 639 1.1 20 1.00
060F10B 640 1.1 20 1.00
Numerical
Numerical
1-059
060F14 645 1.1 20 1.00
060F15 646 1.1 20 1.00
060F26D 652 1.1 20 1.00
SP060F3 632 2.9 50 50 1.00
SP060F5 638 2.9 50 50 1.00
SP060F10B 640 2.9 50 50 1.00
SP060F14 645 2.9 50 50 1.00
Numerical
59-437
060 Rubber Tips SRT (WSPART.1076) 9 100 100 0.30
Aluminum 60A3 666 1.5 20 3.00
60 60A10B 730 1.5 20 4.10
Door Stop
3-3/4” Projection 60A14 669 1.5 20 3.00
60A92 673 1.5 20 3.00
Brass 60B3 605 1.9 10 10.40
438-1021
Numerical
60B4 606 1.9 10 10.40
60B5 609 1.9 10 10.40
60B10 612 1.9 10 13.90
60B10B 613 1.9 10 13.90
60B15 619 1.9 10 13.60
60B26 625 1.9 10 13.90
60B26D 626 1.9 10 13.90
1152-8190
60 Rubber Tips RT (WSPART.1075) 100 100 0.20 Numerical
COR60 See page 28
Door Coordinator
8200-9340
Numerical
Bold pricing indicates item is in stock and available for Fast Track
Rubber Tip - Flexible Stops Rubber SRT (WSPART.1076) 100 100 0.30
HINGES
Bold pricing indicates item is in stock and available for Fast Track
HINGES
SC61Z-716E – 5 5 3.90
61 Rubber Tips RT (WSPART.1075) 100 100 0.20
Brass FB61P-WD US3 605 167.60
FB61
Flush Bold for Wood Door FB61P-WD US4 606 167.60
UL 90 Minute FB61P-WD US10 612 167.60
Constant Latching Top FB61P-WD US10B 613 167.60
and Automatic Stainless FB61P-WD US32 629 167.60
CONTINUOUS
Bottom Bolt
FB61P-WD US32D 630 167.60
HINGES
P=Pair (Top half Brass FB61T-WD US3 605 87.00
w/automatic
bottom bolt) FB61T-WD US4 606 87.00
T=Top Bolt FB61T-WD US10 612 87.00
Only
FB61T-WD US10B 613 87.00
Stainless FB61T-WD US32 629 87.00
FB61T-WD US32D 630 87.00
FB62 Steel FB62-WD US3 605 167.60
PIVOTS
Flush Bolt for Wood Door FB62-WD US4 606 167.60
UL 20 Minute FB62-WD US10 612 167.60
Constant Latching Top FB62-WD US10B 613 167.60
w/Auxiliary Fire Latch
Stainless FB62-WD US32 629 167.60
FB62-WD US32D 630 167.60
63 Steel 63F-605E 632 2.7 20 1.00
Flexible Door Stop 63F-609E 638 2.7 20 1.00
63F-619E 646 1.8 20 1.00
Numerical
Numerical
1-059
63F-716E – 1.8 20 1.00
63F-W – 1.8 20 1.00
63 Rubber Tips RT (WSPART.1075) 100 100 0.20
Aluminum 64A3 666 2.3 20 2.40
64
Door Stop 64A10B 703 2.3 20 2.40
3-1/4” Projection 64A92 673 2.3 20 2.40
Brass 64B3 605 10 9.50
Numerical
59-437
64B4 606 10 10.20
64B5 609 2.1 10 12.20
64B10 612 2.3 10 12.20
64B10B 613 2.3 10 12.20
64B15 619 2.3 10 12.20
64B26 625 2.3 10 12.20
64B26D 626 2.3 10 12.20
438-1021
Numerical
64 Rubber Tips RT (WSPART.1075) 100 100 0.20
SR64 SR64 GRY (100/pk) – 2.1 1 100 26.20
Door Silencer SR64 TAN (100/pk) – 2.1 1 100 26.20
SR64 GRY - BULK – 1 2,500 399.40
(2500/pk)
Bold pricing indicates item is in stock and available for Fast Track
66 66A5 RS MS SS – 10 6.20
Casement Fastener
66A14 RS MS SS 669 10 6.20
66A92 RS MS SS 673 10 6.20
Brass 66B3 RS MS SS 605 10 29.10
66B5 RS MS SS 609 10 29.10
66B15 RS MS SS 619 10 29.10
PIVOTS
Bold pricing indicates item is in stock and available for Fast Track
HINGES
SC70B-716 – 5 5 12.60
SPS70B-605 605 15 15 10.20
SPS70B-609 609 15 15 12.60
SPS70B-619 619 15 15 12.60
Continued from previous page. 620 15 12.60
SPS70B-620 15
CONTINUOUS
SPS70B-716 – 15 15 12.60
Zinc 70Z-406E – 10 2.80
HINGES
70Z-716E – 20 2.80
SC70Z-605E – 0.3 5 5 2.90
SC70Z-619E – 0.3 5 5 3.30
SC70Z-716E – 0.3 5 5 3.30
70 Rubber Tips RT (WSPART.1075) 100 100 0.20
71 Brass 71B3 10 IN 605 1.7 2 56.80
Casement Adjuster 71B3 12 IN 605 1.9 2 62.00
PIVOTS
71B26 10 IN 625 1.7 2 56.80
71B26 12 IN 625 1.9 2 62.00
72 Zinc 72Z-605E – 50 2.20
Door Saver 72Z-609E – 50 2.20
Residential 72Z-613E – 50 2.20
72Z-619E – 50 2.20
Numerical
Numerical
72Z-625E – 50 2.20
1-059
72Z-W – 50 2.20
COR72 See page 27
Door Coordinator
73 Zinc 73Z-605E – 25 4.50
Door Saver 73Z-613E – 25 4.50
Commercial
73Z-619E – 25 4.50
Numerical
59-437
73Z-625E – 25 4.50
90 Aluminum
Side Window Lock SP90A3 666 1.8 25 25 3.70
438-1021
Numerical
Steel CS115 US10B 20 1/2 IN 613 5 5 40.20
CS115
Crash Stop CS115 US10B 25 1/2 IN 613 5.5 5 42.80
CS115 US10B 30 1/2 IN 613 6 5 47.50
CS115 US26D 20 1/2 IN 626 5 5 40.20
CS115 US26D 25 1/2 IN 626 5.5 5 42.80
1152-8190
Numerical
CS115 US26D 30 1/2 IN 626 6 5 47.50
Aluminum HB159 US3AL 666 3.8 5 13.70
HB159
Handrail Bracket HB159 US27 673 3.8 5 13.70
8200-9340
Numerical
Bold pricing indicates item is in stock and available for Fast Track
Bold pricing indicates item is in stock and available for Fast Track
HINGES
253B26D 12 IN US MS 626 0 5 78.90
253 Brass 09-22-605 605 1 1 7.00
Mortise Strike 09-22-613 613 1 1 7.00
Package 09-22-626 626 1 1 7.00
253 Brass 09-33-605 605 1 1 15.70
Angle Strike 09-33-613 613 1 1 15.70
Package
CONTINUOUS
09-33-626 626 1 1 15.70
Brass 261B3 605 2.4 10 16.40
HINGES
261
Manual Flush Bolt 261B5 609 2.4 10 18.10
261B10B 613 2.4 10 20.80
261B15 619 2.4 10 18.80
261B26 625 2.4 10 18.80
261B26D 626 2.4 10 18.80
SP261B3 605 3.8 15 15 16.40
SP261B15 619 0 15 15 18.80
262 Brass 262B3 605 3.6 10 23.90
PIVOTS
Manual Flush Bolt 262B5 606 3.6 10 26.30
262B10B 613 3.6 10 27.60
262B15 619 3.6 10 27.60
262B26 625 3.6 10 27.60
262B26D 626 3.6 10 27.60
262 09-40-605 605 1 1 4.30
Strike Package 09-40-613 613 1 1 4.30
Numerical
Numerical
09-40-626 626 1 1 4.30
1-059
265 Brass 265B3 605 2.1 10 18.70
Manual Flush Bolt 265B5 609 2.1 10 20.60
265B10B 613 2.1 10 21.50
265B15 619 2.1 10 21.50
265B26 625 2.1 10 21.50
265B26D 626 2.1 10 21.50
265 09-40-605 605 1 1 4.30
Numerical
59-437
Strike Package 09-40-613 613 1 1 4.30
09-40-626 626 1 1 4.30
325 Aluminum 325A3 666 1.9 20 2.40
Magnetic Catch 325A92 673 1.9 20 2.40
326 Aluminum 326A3 666 3 10 6.90
Heavy Duty Magnetic Catch 326A92 673 3 10 6.90
327 Aluminum 327A3 666 4 10 11.80
Magnetic Catch 327A92 673 4 10 11.80
438-1021
Numerical
Dual Triple Pole
349
Ball Catch 349B4 606 1.8 10 10.10
349B5 609 1.8 10 12.10
349B10 612 1.8 10 12.10
349B10B 613 1.8 10 12.10
349B15 619 1.8 10 12.60
349B26 625 1.8 10 12.10
349B26D 626 1.8 10 12.10
Numerical
Numerical
HINGES
WS402CCV US15 619 3.1 10 17.70
WS402CCV US26 625 3.1 10 17.10
WS402CCV US26D 626 3.1 10 17.10
WS404 Brass WS404 US3 605 1 20 5.00
Small Wall Stop WS404 US4 606 1 20 5.90
Convex Rubber WS404 US5 609 1 20 5.90
CONTINUOUS
1” Base Diameter
WS404 US10 612 1 20 5.90
HINGES
WS404 US10B 613 1 20 5.90
WS404 US15 619 1 20 6.20
WS404 US26 625 1 20 5.90
WS404 US26D 626 1 20 5.90
405 Aluminum 405A3 666 1.5 20 2.10
Coat and Hat Hook 405A4 667 1.5 20 2.10
405A5 – 1.5 20 2.10
PIVOTS
405A10 668 1.5 20 2.10
405A10B 703 1.5 20 2.10
405A14 667 1.5 20 2.10
405A92 673 1.5 20 2.10
WS406-CVX Brass WS406CVX US3 605 1.8 10 3.50
(406) WS406CVX US4 606 1.8 10 3.50
Numerical
Numerical
Wall Stop WS406CVX US10 612 1.8 10 3.80
1-059
w/Plastic Anchor WS406CVX US10B 613 1.8 10 3.80
Convex Rubber
WS406CVX US15 619 1.8 10 3.80
WS406CVX US26 625 1.8 10 3.50
WS406CVX US26D 626 1.8 10 3.80
Stainless WS406US32D 630 1.8 10 2.80
WS406-CCV Brass WS406CCV US3 605 2 10 3.50
Numerical
59-437
(406 1/2) WS406CCV US4 606 2 10 3.50
Wall Stop WS406CCV US10 612 2 10 3.80
w/Plastic Anchor WS406CCV US10B 613 2 10 3.80
Concave Rubber
WS406CCV US15 619 2 10 3.80
WS406CCV US26 625 2 10 3.80
WS406CCV US26D 626 2 10 3.50
Stainless WS406CCV US32D 630 2 10 2.80
438-1021
Numerical
WS407-CVX Brass WS407CVX US3 605 1.8 10 3.50
(407) WS407CVX US4 606 1.8 10 3.50
Wall Stop WS407CVX US10 612 1.8 10 3.80
w/Drywall Anchor WS407CVX US10B 613 1.8 10 3.80
Convex Rubber
WS407CVX US15 619 1.8 10 3.80
WS407CVX US26 625 1.8 10 3.80
WS407CVX US26D 626 1.8 10 3.50 1152-8190
SPS407CVX B-605 605 15 15 3.60 Numerical
SPS407CVX B-609 609 15 15 4.00
SPS407CVX B-619 619 15 15 4.00
SPS407CVX B-620 620 15 15 4.00
SPS407CVX B-716 716 15 15 4.00
Stainless WS407CVX US32D 630 1.8 10 2.80
8200-9340
Numerical
Bold pricing indicates item is in stock and available for Fast Track
Bold pricing indicates item is in stock and available for Fast Track
42
Ives Price Book 25
Effective June 22, 2009
MODEL SUBSTRATE MODEL NUMBER BHMA FINISH WEIGHT ORDER QTY BOX QTY LIST PRICE
HINGES
FS438 US10B 613 2.7 10 7.70
FS438 US15 619 2.7 10 9.70
FS438 US26 625 2.7 10 7.10
FS438 US26D 626 2.7 10 5.30
Aluminum FS438 US28 628 1.6 10 5.20
Brass FS441 US3 605 1.1 2 19.70
FS441
CONTINUOUS
Floor Stop FS441 US4 606 1.1 2 22.30
HINGES
Now furnished with FS441 US5 609 1.1 2 21.10
wood and masonry FS441 US10 612 1.1 2 22.30
fasteners
FS441 US10B 613 1.1 2 21.10
FS441 US15 619 1.1 2 27.00
FS441 US26 625 1.1 2 27.00
FS441 US26D 626 1.1 2 19.00
FS441 09-315 1 1 1.70
PIVOTS
Rubber Tip
Numerical
Numerical
1-059
WS443 US26D 626 1.5 2 36.60
WS443 09-316 1 1 1.70
Rubber Tip
Numerical
FS444 US10B 613 2 2 27.40
59-437
FS444 US15 619 2 2 29.70
FS444 US26 625 2 2 23.20
FS444 US26D 626 2 2 22.30
FS444 09-316 1 1 1.70
Rubber Tip
438-1021
Numerical
Wall Door Stop WS445 US4 606 1.9 2 58.00
w/Heavy Duty Holder
WS445 US10 612 1.9 2 58.00
for Masonry Mounting
WS445 US10B 613 1.9 2 58.00
WS445 US15 619 1.9 2 60.30
WS445 US26 625 1.9 2 58.00
WS445 US26D 626 1.9 2 58.00
WS445 09-316 1 1 1.70 1152-8190
Numerical
Rubber Tip
Bold pricing indicates item is in stock and available for Fast Track
WS449
Wall Door Stop WS449 US4 606 1.6 2 55.30
w/Heavy Duty Holder WS449 US10 612 1.6 2 55.30
for Drywall Mounting WS449 US10B 613 1.6 2 55.30
WS449 US15 619 1.6 2 57.50
WS449 US26 625 1.6 2 55.30
WS449 US26D 626 1.6 2 55.30
Aluminum WS449 US28 628 0.9 2 39.00
Numerical
Numerical
1-059
Bold pricing indicates item is in stock and available for Fast Track
HINGES
SB453 Sex Bolt Pkg 09-351-604 604 1 1 12.70
Aluminum FS455-4 US3AL 666 1.9 10 6.80
FS455
Kick Down FS455-4 US5AL – 2 10 10.20
Door Holder FS455-4 US10AL 668 1.9 10 6.80
FS455-4 US27 673 1.9 10 6.80
SPFS455-4 US3AL 666 3.1 15 15 6.80
CONTINUOUS
SPFS455-4 US5AL – 3.1 15 15 10.20
HINGES
SPFS455-4 US27 673 3.1 15 15 6.80
Brass FS455-4 US3 605 4.6 10 27.40
FS455-4 US4 606 4.6 10 27.40
FS455-4 US5 609 4.6 10 32.80
FS455-4 US10 612 4.6 10 27.40
FS455-4 US10B 613 4.6 10 32.80
FS455-4 US15 619 4.6 10 34.10
PIVOTS
FS455-4 US26 625 4.6 10 32.80
FS455-4 US26D 626 4.6 10 32.80
FS455 Rubber Tips HRT (FSPART.1075) 100 100 1.00
FB457 Brass FB457-12 US3 605 2 12 22.90
Manual Flush Bolt FB457-12 US4 606 2 12 22.90
UL 3 Hour FB457-12 US10 612 2 12 22.90
Single Metal Door
Numerical
Numerical
FB457-12 US10B 613 2 12 22.90
1-059
Optional Rod Lengths
Available FB457-12 US15 619 2 12 22.90
18", 24", 36", 48" FB457-12 US26 625 2 12 22.90
5.00 List Add
FB457-12 US26D 626 2 12 22.90
FB457 Bolt Tips 09-176-604 1 1 4.00
FB457 Guide PKG 09-135 1 1 1.70
FB458 Brass FB458 US3 12 IN 605 2 12 19.20
Numerical
59-437
Manual Flush Bolt FB458 US4 12 IN 606 2 12 19.20
UL 3 Hour
FB458 US5 12 IN 609 2 12 19.20
Single Metal Door
FB458 US10 12 IN 612 2 12 19.20
Optional Rod Lengths FB458 US10B 12 IN 613 2 12 19.20
Available
18", 24", 36", 48" FB458 US15 12 IN 619 2 12 19.20
5.00 List Add FB458 US26 12 IN 625 2 12 19.20
FB458 US26D 12 IN 626 2 12 18.10
438-1021
Numerical
FB458 Bolt Tips 09-176-604 604 1 1 4.00
FB458 Guide PKG 09-135 1 1 1.70
Brass RB470 US3 605 0.9 2 26.30
RB470
Roller Bumper 2” Reach RB470 US26 625 0.9 2 32.90
RB470 US26D 626 0.9 2 32.90
6” Projection
Numerical
1” Max Clearance
FS496 US26 625 1.5 1 81.70
Floor to Door
FS496 US26D 626 1.5 1 81.70
FS497 Brass FS497 US3 605 1.4 1 76.30
Auto Door Stop FS497 US10 612 1.4 1 91.50
and Holder FS497 US10B 613 1.4 1 91.50
FS497 US26 625 1.4 1 91.50
FS497 US26D 626 1.4 1 76.30
1152-8190
Numerical
Bold pricing indicates item is in stock and available for Fast Track
HINGES
571A15 670 1.3 20 1.50
571A92 673 1.3 20 1.20
571A-716 – 1.3 20 2.00
571A-BLK – 1.4 20 2.00
571A-W – 1.4 20 2.00
SP571A3 666 1.9 25 25 1.20
CONTINUOUS
SP571A5 – 1.9 25 25 1.50
HINGES
SP571A14 669 1.9 25 25 1.50
SP571A92 673 1.9 25 25 1.20
SP571A-W – 1.9 25 25 2.00
Brass 571B3 605 1.5 10 6.90
571B4 606 1.5 10 8.30
571B5 609 1.5 10 8.30
571B10B 613 1.5 10 8.30
PIVOTS
571B15 619 1.5 10 8.60
571B26 625 1.5 10 8.30
571B26D 626 1.5 10 8.30
571B-716 – 1.5 10 8.30
SC571B-605 605 5 5 7.50
SC571B-609 609 5 5 9.20
SC571B-619 619 5 5 9.20
Numerical
Numerical
1-059
SC571B-620 620 5 5 9.20
SC571B-716 – 5 5 9.20
SP571B26 625 2.4 10 10 8.30
SPS571B-605 605 25 25 7.50
SPS571B-609 609 25 25 9.40
SPS571B-619 619 25 25 9.40
Numerical
SPS571B-620 620 25 25 9.40
59-437
SPS571B-716 – 25 25 9.40
Zinc ** 571Z-619E – 4.7 20 4.20
Aluminum 572A3 666 1.9 20 3.40
572 572A5 – 1.9 20 3.60
Coat and Hat Hook
572A10 668 1.9 20 3.60
572A10B 703 0 20 3.60
438-1021
Numerical
572A14 669 1.9 20 3.60
572A15 670 1.9 20 3.60
572A92 673 1.9 20 3.40
Brass 572B3 605 1.1 10 9.50
572B4 606 1.1 10 9.50
572B5 609 1.1 10 11.90
572B10 612 1.1 10 9.50 1152-8190
572B10B 613 1.1 10 11.40 Numerical
572B15 619 1.1 10 11.90
572B26 625 1.1 10 11.40
572B26D 626 1.1 10 11.40
8200-9340
Numerical
** Zinc substrate, narrow base Bold pricing indicates item is in stock and available for Fast Track
580A716 – 0 20 2.60
Numerical
1-059
1-059
Bold pricing indicates item is in stock and available for Fast Track
HINGES
SPS581B-619 619 25 25 6.40
SPS581B-620 620 25 25 6.40
SPS581B-716 – 25 25 6.40
Zinc** 581Z-619E – 2.6 20 4.20
Aluminum 582A3 666 1 20 1.50
582 582A5 – 1 20 1.60
CONTINUOUS
Wardrobe Hook
582A10 668 1 20 1.60
HINGES
582A14 669 1 20 1.60
582A15 670 1 20 1.60
582A92 673 1 20 1.50
582A-716 – 1 20 1.60
582A-BLK – 1 20 2.10
582A-W – 1 20 2.10
SP582A3 666 1.7 25 25 1.50
PIVOTS
SP582A5 – 1.7 25 25 1.60
SP582A14 668 1.7 25 25 1.60
SP582A92 673 1.7 25 25 1.50
SP582A-W – 1.4 25 25 2.10
Brass 582B3 605 1.2 10 6.20
582B4 606 1.2 10 6.90
582B5 609 1.2 10 6.90
Numerical
Numerical
1-059
582B10 612 1.2 10 7.50
582B10B 613 1.2 10 7.50
582B15 619 1.2 10 7.80
582B26 625 1.2 10 7.50
582B26D 626 1.2 10 7.50
582B-716 – 1.2 10 7.80
Numerical
SC582B-605 605 5 5 6.50
59-437
SC582B-609 609 5 5 8.10
SC582B-619 619 5 5 8.10
SC582B-620 620 5 5 8.10
SC582B-716 – 5 5 8.10
SP582B26 625 1.2 10 10 7.50
SPS582B-605 605 25 25 6.50
438-1021
Numerical
SPS582B-609 609 25 25 8.10
SPS582B-619 619 25 25 8.10
SPS582B-620 620 25 25 8.10
SPS582B-716 – 25 25 8.10
Zinc ** 582Z-619E – 4.7 20 4.20
585/586 Steel SP585F3 632 2 25 25 1.40
Closet Pole Socket Plastic SP586P – 1.6 20 20 1.10 1152-8190
Numerical
** Zinc substrate, narrow base Bold pricing indicates item is in stock and available for Fast Track
701
Door Viewer, 120° 701B10B 613 0.8 10 7.60
For Doors 2-1/8” to 2-5/8” 701B26D 626 0.8 10 7.60
U= U701B4 606 0.8 10 10.80
UL Listed U701B10B 613 0.8 10 10.80
90 Min U701B26D 626 0.8 10 10.80
VR810DT/VR814DT Stainless VR810-DT US32D 630 227.80
Vandal Resistant Trim
1152-8190
HINGES
Stainless VR900-LLP LH US32D 630 227.80
VR900LLP/VR904LLP
Vandal Resistant Trim VR900-LLP RH US32D 630 227.80
Use w/Mortise Locks VR904-LLP LH US32D 630 227.80
Inswing Doors VR904-LLP RH US32D 630 227.80
LLP = Less Lock Protectors
CONTINUOUS
Vandal Resistant Trim
HINGES
Use w/Von Duprin 98/99
VR914-DT US32D 630 227.80
Series Rim and
Verticle Exit Devices
Stainless VR910-NL US32D 630 227.80
VR910NL/VR914NL
Vandal Resistant Trim VR914-NL US32D 630 227.80
Use w/Von Duprin 98/99
Series Rim and
Verticle Exit Devices
PIVOTS
VR910M-DT/ Stainless VR910M-DT US32D 630 227.80
VR914M-DT
Vandal Resistant Trim VR914M-DT US32D 630 227.80
Use w/Von Duprin 98/9975
Series Mortise Exit Devices
Numerical
Numerical
VR914M-NL
1-059
Vandal Resistant Trim VR914M-NL US32D 630 227.80
Use w/Von Duprin 98/9975
Series Mortise Exit Devices
Numerical
59-437
980B15 619 1 1 29.70
980B19 622 1 1 24.80
980B26 625 1 1 28.60
980B26D 626 1 1 28.60
990 Aluminum 990A3 666 10 6.20
Sliding Door Pull 990A5 – 10 6.20
Doors 1-1/8” to 1-1/2”
990A14 669 10 6.20
438-1021
Numerical
990A15 670 10 6.90
990A26D 702 10 6.20
990A-716 – 10 6.20
Brass 990B3 605 1.9 5 9.60
990B-613 613 1.9 5 11.00
990B-619 619 1.9 5 11.00
990B26 625 1.9 5 11.00 1152-8190
990B-716 – 1.9 5 11.00 Numerical
SC990B-605 605 5 5 8.60
SC990B-609 609 5 5 10.30
SC990B-619 619 5 5 10.30
SC990B-620 620 5 5 10.30
SC990B-625 625 2.4 5 5 13.20
8200-9340
Numerical
SC990B-716 – 5 5 10.30
Bold pricing indicates item is in stock and available for Fast Track
SC3P1011F-716E – 3 3 21.30
1012* SC3P1012F-605E 632 3 3 17.80
Residential Hinge 3.5” Steel SC3P1012F-609E 638 3 3 21.30
1/4” Radius Corner
SC3P1012F-619E – 3 3 21.30
SC3P1012F-716E – 3 3 21.30
1020* SC3P1020F-605E 632 3 3 21.30
Residential Hinge 4” Steel SC3P1020F-609E 638 3 3 22.90
438-1021
Numerical
Square Corner
SC3P1020F-619E – 3 3 22.90
SC3P1020F-620E – 3 3 22.90
SC3P1020F-716E – 3 3 22.90
SC3P1021F-605E 632 3 3 21.30
1021*
Residential Hinge 4” Steel SC3P1021F-609E 638 3 3 22.90
5/8” Radius Corner SC3P1021F-619E – 3 3 22.90
1152-8190
SC3P1021F-620E – 3 3 22.90
Numerical
SC3P1021F-716E – 3 3 22.90
8200-9340
Numerical
* Note: SC3P (3 pack hinges) must be ordered in multiples of 3. Qty of 3 equals 9 hinges. Bold pricing indicates item is in stock and available for Fast Track
HINGES
RL1152 US10B 613 113.50
RL1152 US26 625 113.50
RL1152 US26D 626 111.20
FS1153/FS1154 Aluminum FS1153 US28 628 41.30
Plunger Type Brass FS1154 US3 605 74.50
Door Holder FS1154 US4 606 74.50
CONTINUOUS
FS1154 US10 612 74.50
HINGES
FS1154 US10B 613 74.50
FS1154 US26 625 74.50
FS1154 US26D 626 74.50
SB1600M1 Steel SB1600M1-B SP28 689 108.20
Handle Up SB1600M1-B SP10 691 114.40
11” Steel Bolt SB1600M1-B SPBLK 693 114.40
B-Packed w/Mortise Strikes
SB1600M1-B SP313 695 108.20
PIVOTS
T-Packed w/Universal Strikes
L-Locking Version* SB1600M1-B SP4 706 114.40
SB1600M1-T SP10 691 114.40
UL Listed
SB1600M1-T SP28 689 108.20
SB1600M1-T SP313 695 108.20
SB1600M1-T SPBLK 693 114.40
SB1600M1-T SP4 706 114.40
Numerical
Numerical
SB1600M1-BL SP10 691 158.10
1-059
SB1600M1-BL SP28 689 149.80
SB1600M1-BL SP313 695 149.80
SB1600M1-BL SPBLK 693 158.10
SB1600M1-BL SP4 706 158.10
SB1600M1-TL SP10 691 158.10
SB1600M1-TL SP28 689 149.80
Numerical
59-437
SB1600M1-TL SP313 695 149.80
SB1600M1-TL SPBLK 693 158.10
SB1600M1-TL SP4 706 158.10
Steel SB1600M2-B SP4 706 114.40
SB1600M2 SB1600M2-B SP10 691 114.40
Handle Up
11” Steel Bolt SB1600M2-B SP28 689 108.20
B-Packed w/Mortise Strikes SB1600M2-B SP313 695 108.20
438-1021
Numerical
T-Packed w/Universal Strikes
SB1600M2-B SPBLK 693 114.40
L-Locking Version*
SB1600M2-BL SP4 706 158.10
UL Listed SB1600M2-T SP10 691 114.40
SB1600M2-T SP28 689 108.20
SB1600M2-T SP313 695 108.20
SB1600M2-T SPBLK 693 114.40
SB1600M2-T SP4 706 114.40 1152-8190
SB1600M2-BL 1SP10 691 158.10 Numerical
SB1600M2-BL SP28 689 149.80
SB1600M2-BL SP313 695 149.80
SB1600M2-BL SPBLK 693 158.10
SB1600M2-TL SP4 706 158.10
SB1600M2-TL SP10 691 158.10
8200-9340
Numerical
Bold pricing indicates item is in stock and available for Fast Track
Bold pricing indicates item is in stock and available for Fast Track
HINGES
SC2-3016-605 605 5 5 7.20
1 SC2-3016-619 619 5 5 9.30
SC2-3016-716 – 5 5 9.30
SC2-3026-605 605 5 5 7.20
2 SC2-3026-619 619 5 5 9.30
SC2-3026-716 – 5 5 9.30
CONTINUOUS
SC2-3036-605 605 5 5 7.20
HINGES
3 SC2-3036-619 619 5 5 9.30
SC2-3036-716 – 5 5 9.30
SC2-3046-605 605 5 5 7.20
4 SC2-3046-619 619 5 5 9.30
SC2-3046-716 – 5 5 9.30
SC2-3056-605 605 5 5 7.20
5 SC2-3056-619 619 5 5 9.30
PIVOTS
SC2-3056-716 – 5 5 9.30
SC2-3066-605 605 5 5 7.20
6 SC2-3066-619 619 5 5 9.30
SC2-3066-716 – 5 5 9.30
SC2-3076-605 605 5 5 7.20
7 SC2-3076-619 619 5 5 9.30
SC2-3076-716 – 5 5 9.30
Numerical
Numerical
1-059
SC2-3086-605 605 5 5 7.20
8 SC2-3086-619 619 5 5 9.30
SC2-3086-716 – 5 5 9.30
SC2-3096-605 605 5 5 7.20
9 SC2-3096-619 619 5 5 9.30
SC2-3096-716 – 5 5 9.30
Numerical
59-437
438-1021
Numerical
1152-8190
Numerical
8200-9340
Numerical
Bold pricing indicates item is in stock and available for Fast Track
Bold pricing indicates item is in stock and available for Fast Track
CONTINUOUS HINGES
HINGES
Manufacturer
PIVOTS
Numerical
Numerical
1-059
Numerical
59-437
438-1021
Numerical
1152-8190
Numerical
8200-9340
Numerical
Bold pricing indicates item is in stock and available for Fast Track
Bold pricing indicates item is in stock and available for Fast Track
PIVOTS
Numerical
Numerical
1-059
8100/8200/8300 - Series
Special Pricing Information
Suffix List Add
Optional Mounting Types: F 8102, 8103, 8105, 8111, 8302, 8303, 8311 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .No Additional Charge
G 8102, 8103, 8111, 8302, 8303, 8311 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .No Additional Charge
H or I 8102, 8103, 8302, 8303 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10.00
Numerical
59-437
J 8102, 8103, 8302, 8303, Back-to-Back Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(per pair) 19.75
Prefix model number with “PR” for pair. Example PR8102
K 8121 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(per pair) 6.00
L 8103EZ, 8190 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14.20
M 8103EZ, 8190 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27.50
N 8103EZ, 8190, 9100 Push/Plate Combinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14.20
438-1021
Numerical
O 8103EZ, 8190, 9100 Push/Plate Combinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23.10
NS 9100, 9100EZ, 9190 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .No Additional Charge
NO 9100, 9100EZ, 9190 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29.70
Optional Cut-Outs: CFC Cut for cylinder on 8200/8300 Series Push or Pull Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.50
(1-1/4" diameter) 1152-8190
CFT Cut for Thumbturn on 8200/8300 Series Push or Pull Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5.00 Numerical
(3-3/8" diameter)
Plates ordered for cut-out for cylinder or thumbturn, cutout is positioned 2" from top and centered in the plate width, up to 4" wide plates. For plates over
4" in width, cut-out is located 2" from edge. Please specify Door Handing LH or RH when ordering plates wider than 4".
Optional Plate: 8300 For plate pierced for Pull, order 8300 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(to 8200 list price) 2.00
Numerical
** Item Number indicates product is also available through Schlage Residential. Bold pricing indicates item is in stock and available for Fast Track
Bold pricing indicates item is in stock and available for Fast Track
HINGES
Continued from 12" 8103-2 US26 625 103.60
previous page. 8103-2 US26D 626 99.20
Aluminum 8103-2 US28 628 25.80
Stainless 8103-2 US32 629 70.70
8103-2 US32D 630 62.00
Brass 8103EZ-8 US3 605 87.70
8103EZ
Straight Door Pull 8103EZ-8 US4 606 87.70
CONTINUOUS
1” Round, 8103EZ-8 US10 612 97.80
2-1/2” Clearance 8103EZ-8 US10B 613 101.10
HINGES
8"
8103EZ-8 US15 619 101.10
Optional mounting types 8103EZ-8 US26 625 92.70
L, M, N, O available. 8103EZ-8 US26D 626 88.00
See page 59 for list prices.
Aluminum 8103EZ-8 US28 628 31.50
Stainless 8103EZ-8 US32 629 64.20
Antimicrobial Coating 8103EZ-8 US32D 630 56.00
US26D-AM or US32D-AM Brass 8103EZ-0 US3 605 96.10
available. Add 26.00 List. 8103EZ-0 US4 606 96.10
PIVOTS
8103EZ-0 US10 612 109.50
10" 8103EZ-0 US10B 613 112.80
8103EZ-0 US15 619 112.80
8103EZ-0 US26 625 101.10
8103EZ-0 US26D 626 96.10
Aluminum 8103EZ-0 US28 628 32.80
Stainless 8103EZ-0 US32 629 70.40
8103EZ-0 US32D 630 62.00
Numerical
Numerical
Brass 8103EZ-2 US3 605 104.40
1-059
8103EZ-2 US4 606 104.40
12" 8103EZ-2 US10 612 121.30
8103EZ-2 US10B 613 122.90
8103EZ-2 US15 619 122.90
8103EZ-2 US26 625 110.60
8103EZ-2 US26D 626 106.20
Aluminum 8103EZ-2 US28 628 34.20
Numerical
Stainless 8103EZ-2 US32 629 76.60
59-437
8103EZ-2 US32D 630 67.90
Brass 8105-6 US3 605 44.00
8105 8105-6 US4 606 44.00
Straight Door Pull
1” Flattened 1/2 Round, 8105-6 US10 612 54.10
1-1/2” Clearance 8105-6 US10B 613 55.50
6" 8105-6 US15 619 55.50
Optional mounting types 8105-6 US26 625 44.30
438-1021
F available. 8105-6 US26D 626 40.50
Numerical
See page 59 for list prices. Aluminum 8105-6 US28 628 18.40
Stainless 8105-6 US32 629 NA
8105-6 US32D 630 33.60
Antimicrobial Coating Brass 8105-8 US3 605 68.30
US26D-AM or US32D-AM
8105-8 US4 606 68.30
available. Add 26.00 List.
8105-8 US10 612 74.30
8105-8 US10B 613 74.30
8" 8105-8 US15 619 74.30 1152-8190
8105-8 US26 625 71.30 Numerical
8105-8 US26D 626 71.30
Aluminum 8105-8 US28 628 22.90
Stainless 8105-8 US32 629 NA
8105-8 US32D 630 49.00
Brass 8105-0 US3 605 74.30
8105-0 US4 606 74.30
8105-0 US10 612 83.20
8200-9340
10"
Numerical
Antimicrobial Coating
US26D-AM or US32D-AM
available. Add 26.00 List.
18"
Numerical
Bold pricing indicates item is in stock and available for Fast Track
HINGES
Specify US26D AM 8200 US10B 613 20.80
or 3x12" 8200 US15 619 20.80
US32D AM (89x306mm) 8200 US26 625 20.80
(add $26.00 to list price)
8200 US26D 626 20.80
Aluminum 8200 US28 628 10.40
C8200 PA28 628 5 5 8.30
CONTINUOUS
Stainless 8200 US32 629 NA
HINGES
8200 US32D 630 10.40
Brass 8200 US3 605 18.70
8200 US4 606 18.70
8200 US10 612 21.80
8200 US10B 613 22.90
8200 US15 619 22.90
8200 US26 625 21.80
PIVOTS
3.5x15" 8200 US26D 626 21.80
(89x381mm) SC8200 B3 605 5 5 19.80
Aluminum 8200 US28 628 7.80
C8200 PA28 5 5 8.60
Stainless 8200 US32 629 NA
8200 US32D 630 10.90
CGC8200 US32D 630 5 5 14.20
Numerical
Numerical
1-059
Brass 8200 US3 605 21.80
8200 US4 606 21.80
8200 US10 612 25.00
8200 US10B 613 26.00
4x16" 8200 US15 619 26.00
(102x408mm) 8200 US26 625 25.00
Numerical
8200 US26D 626 25.00
59-437
Aluminum 8200 US28 628 8.30
Stainless 8200 US32 629 NA
8200 US32D 630 12.50
Brass 8200 US3 605 34.30
8200 US4 606 34.30
8200 US10 612 38.50
438-1021
Numerical
8200 US10B 613 41.60
6x16" 8200 US15 619 41.60
(153x408mm) 8200 US26 625 36.40
8200 US26D 626 36.40
Aluminum 8200 US28 628 10.40
Stainless 8200 US32 629 NA
8200 US32D 630 17.20 1152-8190
Brass 8200 US3 605 42.60 Numerical
8200 US4 606 42.60
8200 US10 612 48.90
8x16" 8200 US10B 613 52.00
(204x408mm) 8200 US15 619 52.00
8200 US26 625 47.80
8200-9340
Bold pricing indicates item is in stock and available for Fast Track
Bold pricing indicates item is in stock and available for Fast Track
HINGES
F, G, H, I, J available. 8302-8 US10B 613 95.40
See page 59 for list prices. 8” 6x16" 8302-8 US15 619 95.40
(153x408mm) 8302-8 US26 625 86.80
Antimicrobial Coating 8302-8 US26D 626 81.80
US26D-AM or US32D-AM Aluminum 8302-8 US28 628 27.10
available. Add 26.00 List. Stainless 8302-8 US32D 630 46.00
CONTINUOUS
Brass 8302-0 US3 605 71.90
HINGES
8302-0 US4 606 71.90
8302-0 US10 612 83.00
8302-0 US10B 613 85.50
10" 3.5x15" 8302-0 US15 619 85.50
(89x381mm) 8302-0 US26 625 73.60
8302-0 US26D 626 73.90
Aluminum 8302-0 US28 628 25.70
PIVOTS
Stainless 8302-0 US32D 630 44.60
Brass 8302-0 US3 605 75.00
8302-0 US4 606 75.00
8302-0 US10 612 86.10
8302-0 US10B 613 88.90
10" 4x16" 8302-0 US15 619 88.90
(102x408mm) 8302-0 US26 625 76.80
Numerical
Numerical
1-059
8302-0 US26D 626 77.10
Aluminum 8302-0 US28 628 26.20
Stainless 8302-0 US32D 630 46.20
Brass 8302-0 US3 605 87.50
8302-0 US4 606 87.50
8302-0 US10 612 99.60
Numerical
59-437
8302-0 US10B 613 104.50
10" 6x16" 8302-0 US15 619 104.50
(153x408mm) 8302-0 US26 625 88.20
8302-0 US26D 626 88.50
Aluminum 8302-0 US28 628 28.30
Stainless 8302-0 US32D 630 50.90
438-1021
Numerical
1152-8190
Numerical
8200-9340
Numerical
Bold pricing indicates item is in stock and available for Fast Track
122.20
Numerical
(153x408mm)
1-059
613
59-437
Bold pricing indicates item is in stock and available for Fast Track
HINGES
8303-0 US10B 613 147.60
10" 6x16" 8303-0 US15 619 147.60
(153x408mm) 8303-0 US26 625 130.50
8303-0 US26D 626 125.50
Aluminum 8303-0 US28 628 34.90
Stainless 8303-0 US32D 630 73.20
CONTINUOUS
Brass 8305-6 US3MODEL 605
PULL CTC PLATE SIZE SUBSTRATE MODEL NUMBER BHMA 62.70
FINISH
HINGES
8305-6 US4 606 62.70
8305 8305-6 US10 612 75.90
Pull Plate
8305-6 US10B 613 78.40
Optional mounting types 6" 3.5x15" 8305-6 US15 619 78.40
F available. (89x381mm) 8305-6 US26 625 66.10
See page 59 for list prices.
8305-6 US26D 626 62.30
Aluminum 8305-6 US28 628 26.20
PIVOTS
Antimicrobial Coating Stainless 8305-6 US32D 630 44.50
US26D-AM or US32D-AM
available. Add 26.00 List. Brass 8305-6 US3 605 65.80
8305-6 US4 606 65.80
8305-6 US10 612 79.00
8305-6 US10B 613 81.50
6" 4x16" 8305-6 US15 619 81.50
Numerical
Numerical
(102x408mm) 8305-6 US26 625 69.30
1-059
8305-6 US26D 626 65.40
Aluminum 8305-6 US28 628 26.70
Stainless 8305-6 US32D 630 46.10
Brass 8305-6 US3 605 78.30
8305-6 US4 606 78.30
8305-6 US10 612 92.60
Numerical
59-437
6x16" 8305-6 US10B 613 97.10
6" (153x408mm) 8305-6 US15 619 97.10
8305-6 US26 625 80.70
8305-6 US26D 626 76.90
Aluminum 8305-6 US28 628 28.80
Stainless 8305-6 US32D 630 50.80
Brass 8305-8 US3 605 87.00
438-1021
Numerical
8305-8 US4 606 87.00
8305-8 US10 612 96.10
3.5x15" 8305-8 US10B 613 97.10
8" (89x381mm) 8305-8 US15 619 97.10
8305-8 US26 625 93.20
8305-8 US26D 626 93.20
Aluminum 8305-8 US28 628 30.70 1152-8190
Stainless 8305-8 US32D 630 59.90 Numerical
8200-9340
Numerical
Bold pricing indicates item is in stock and available for Fast Track
See page 59 for list prices. 8" 4x16" 8305-8 US15 619 100.30
(102x408mm) 8305-8 US26 625 96.30
Antimicrobial Coating 8305-8 US26D 626 96.30
US26D-AM or US32D-AM Aluminum 8305-8 US28 628 31.20
available. Add 26.00 List. Stainless 8305-8 US32D 630 61.50
CONTINUOUS
Bold pricing indicates item is in stock and available for Fast Track
HINGES
See page 59 for list prices. 5" 3.5x15" 8311-5 US10B 613 69.50
(89x381mm) 8311-5 US15 619 69.50
Antimicrobial Coating 8311-5 US26 625 63.40
US26D-AM or US32D-AM 8311-5 US26D 626 5 5 66.50
available. Add 26.00 List. CGC8311-5B26D 626 66.50
CONTINUOUS
Aluminum 8311-5 US28 628 2 2 34.50
C8311-5PA28 628 34.50
HINGES
Stainless 8311-5 US32D 630 49.50
Brass 8311-5 US3 605 63.40
8311-5 US4 606 63.40
8311-5 US10 612 71.60
5" 4x16" 8311-5 US10B 613 72.60
(102x408mm) 8311-5 US15 619 72.60
PIVOTS
8311-5 US26 625 66.60
8311-5 US26D 626 69.60
Aluminum 8311-5 US28 628 35.00
Stainless 8311-5 US32D 630 51.10
Brass 8311-5 US3 605 75.90
8311-5 US4 606 75.90
8311-5 US10 612 85.10
Numerical
Numerical
1-059
5" 6x16" 8311-5 US10B 613 88.20
(153x408mm) 8311-5 US15 619 88.20
8311-5 US26 625 78.00
8311-5 US26D 626 81.00
Aluminum 8311-5 US28 628 37.10
Stainless 8311-5 US32D 630 55.70
Numerical
59-437
438-1021
Numerical
1152-8190
Numerical
8200-9340
Numerical
Bold pricing indicates item is in stock and available for Fast Track
8400 Options
SUFFIX DESCRIPTION SIZE LIST ADD PER PLATE
B4E Hand Bevel Four Edges of Metal Plates 16" and under $ 2.50
Numerical
Numerical
1-059
8401 Gasket Tape Kit (sold separately) Fits 8" x 34" $ 16.00 ea.
1152-8190
Bold pricing indicates item is in stock and available for Fast Track
HINGES
8 1.76 1.92 2.08 2.24 2.40 2.56 2.72 2.88 3.04 3.20 3.36 3.52 3.68 3.84
10 2.20 2.40 2.60 2.80 3.00 3.20 3.40 3.60 3.80 4.00 4.20 4.40 4.60 4.80
12 2.64 2.88 3.12 3.36 3.60 3.84 4.08 4.32 4.56 4.80 5.04 5.28 5.52 5.76
14 3.08 3.36 3.64 3.92 4.20 4.48 4.76 5.04 5.32 5.60 5.88 6.16 6.44 6.72
16 3.52 3.84 4.16 4.48 4.80 5.12 5.44 5.76 6.08 6.40 6.72 7.04 7.36 7.68
18 3.96 4.32 4.68 5.04 5.40 5.76 6.12 6.48 6.84 7.20 7.56 7.92 8.28 8.64
CONTINUOUS
20 4.40 4.80 5.20 5.60 6.00 6.40 6.80 7.20 7.60 8.00 8.40 8.80 9.20 9.60
HINGES
22 4.84 5.28 5.72 6.16 6.60 7.04 7.48 7.92 8.36 8.80 9.24 9.68 10.12 10.56
24 5.28 5.76 6.24 6.72 7.20 7.68 8.16 8.64 9.12 9.60 10.08 10.56 11.04 11.52
height
26 5.72 6.24 6.76 7.28 7.80 8.32 8.84 9.36 9.88 10.40 10.92 11.44 11.96 12.48
28 6.16 6.72 7.28 7.84 8.40 8.96 9.52 10.08 10.64 11.20 11.76 12.32 12.88 13.44
30 6.60 7.20 7.80 8.40 9.00 9.60 10.20 10.80 11.40 12.00 12.60 13.20 13.80 14.40
32 7.04 7.68 8.32 8.96 9.60 10.24 10.88 11.52 12.16 12.80 13.44 14.08 14.72 15.36
34 7.48 8.16 8.84 9.52 10.20 10.88 11.56 12.24 12.92 13.60 14.28 14.96 15.64 16.32
PIVOTS
36 7.92 8.64 9.36 10.08 10.80 11.52 12.24 12.96 13.68 14.40 15.12 15.84 16.56 17.28
38 8.36 9.12 9.88 10.64 11.40 12.16 12.92 13.68 14.44 15.20 15.96 16.72 17.48 18.24
40 8.80 9.60 10.40 11.20 12.00 12.80 13.60 14.40 15.20 16.00 16.80 17.60 18.40 19.20
42 9.24 10.08 10.92 11.76 12.60 13.44 14.28 15.12 15.96 16.80 17.64 18.48 19.32 20.16
44 9.68 10.56 11.44 12.32 13.20 14.08 14.96 15.84 16.72 17.60 18.48 19.36 20.24 21.12
46 10.12 11.04 11.96 12.88 13.80 14.72 15.64 16.56 17.48 18.40 19.32 20.24 21.16 22.08
Numerical
Numerical
48 10.56 11.52 12.48 13.44 14.40 15.36 16.32 17.28 18.24 19.20 20.16 21.12 22.08 23.04
1-059
When pricing IVES Series 8400 Door Protection Plates to order, find the hundred square inch size on the chart above.
If ordering in increments not shown on above matrix, use the next larger size, height or width.
Example: 9 1/2" x 33 1/2" = 10 x 34 or 3.40 sq. inches.
For pricing, multiply square inch size by list price = 3.40 sq. inches X US32D list $11.20 = $38.08
Numerical
59-437
Residential Kickplates
MODEL SUBSTRATE PACKING MODEL NUMBER WEIGHT ORDER QTY BOX QTY LIST PRICE
438-1021
C8400PA28 6X30 5 5 20.80
Numerical
CARDED C8400PA28 6X34 5 5 22.20
SC8400PA28 8X34 5 5 27.80
SC8400PA3 6X30 5 5 30.50
SC8400PA3 6X34 5 5 31.90
SC8400PA3 8X34 5 5 38.80
SC8400PA-619 8X34 5 5 39.00
1152-8190
Numerical
SC8400PA-716 8X34 5 5 38.10
C8400B3 6X30 5 5 47.10
Brass CARDED C8400B3 6X34 5 5 49.90
C8400B-505 6X30 5 5 55.40
C8400B-505 8X34 5 5 97.00
SC8400B3 8X34 5 5 55.40
SC8400B-619 6X30 5 5 49.90
8200-9340
Numerical
Note: All items in price book available as special order. Please contact Schlage Residential customer service at 800-847-8688
Bold pricing indicates item is in stock and available for Fast Track
HINGES
See page 59 for list prices. 625 9103EZ-33-2-US26 284.60
Antimicrobial Coating 626 9103EZ-33-2-US26D 284.60
US26D-AM or US32D-AM Stainless 629 9103EZ-33-2-US32 232.60
available. Add 26.00 List. 630 9103EZ-33-2-US32D 204.50
Brass 605 9190-28-8-USB3 284.60
9190
Push / Pull Combo 8" 28" 606 9190-28-8-US4 284.60
CONTINUOUS
1” Round 612 9190-28-8-US10 332.20
(8190EZ Pull + 9100 Push)
HINGES
613 9190-28-8-US10B 332.20
625 9190-28-8-US26 296.50
Optional mounting types
NS, NO available. 626 9190-28-8-US26D 296.50
See page 59 for list prices. Stainless 629 9190-28-8-US32 241.60
630 9190-28-8-US32D 208.90
Brass 605 9190-28-0-US3 293.60
Antimicrobial Coating
US26D-AM or US32D-AM 10" 28" 606 9190-28-0-US4 293.60
available. Add 26.00 List. 612 9190-28-0-US10 338.10
PIVOTS
613 9190-28-0-US10B 338.10
625 9190-28-0-US26 305.40
626 9190-28-0-US26D 305.40
Stainless 629 9190-28-0-US32 247.50
630 9190-28-0-US32D 214.90
Brass 605 9190-28-2-US3 299.50
12" 28" 606 9190-28-2-US4 299.50
Numerical
Numerical
1-059
612 9190-28-2-US10 347.00
613 9190-28-2-US10B 347.00
Custom Sizing Available 625 9190-28-2-US26 314.40
Under 28" same price as 28".
Over 28" less than 33" 626 9190-28-2-US26D 314.40
same price as 33". Stainless 629 9190-28-2-US32 305.40
Over 33", add 630 9190-28-2-US32D 220.80
$4.30 List per inch. Brass 605 9190-28-18-US3 332.80
Numerical
59-437
18" 28" 606 9190-28-18-US4 332.80
612 9190-28-18-US10 383.30
613 9190-28-18-US10B 383.30
625 9190-28-18-US26 347.70
626 9190-28-18-US26D 347.70
Stainless 629 9190-28-18-US32 282.30
630 9190-28-18-US32D 249.60
438-1021
Numerical
Brass 605 9190-33-8-US3 284.60
8" 33" 606 9190-33-8-US4 284.60
612 9190-33-8-US10 332.20
613 9190-33-8-US10B 332.20
625 9190-33-8-US26 296.50
Continued on next page. 626 9190-33-8-US26D 296.50
Stainless 629 9190-33-8-US32 241.60
1152-8190
Numerical
630 9190-33-8-US32D 208.90
Brass 605 9190-33-0-US3 293.60
10" 33" 606 9190-33-0-US4 293.60
612 9190-33-0-US10 338.10
613 9190-33-0-US10B 338.10
625 9190-33-0-US26 305.40
626 9190-33-0-US26D 305.40
8200-9340
Bold pricing indicates item is in stock and available for Fast Track
Bold pricing indicates item is in stock and available for Fast Track
HINGES
86 Barrel Bolt Brass C86B3 605 5 5 4.30
CONTINUOUS
Brass C9042B3 605 5 5 3.90
HINGES
9051 Middle Butt Hinge Brass C9051B3 605 5 5 5.60
PIVOTS
9120 Solid Brass Hasp Brass C9120B3 605 5 5 2.80
9130 Solid Brass Hasp w/Hook Brass C9130B3 605 5 5 3.40
Numerical
Numerical
9220 Friction Support Steel C9220F3 RH 632 5 5 4.20
1-059
9311 Brass Corner Brass C9311B3 605 5 5 4.30
Numerical
Steel C9340F3 632 5 5 3.50
59-437
438-1021
Numerical
1152-8190
Numerical
8200-9340
Numerical
Bold pricing indicates item is in stock and available for Fast Track
76
Numerical PIVOTS CONTINUOUS HINGES
8200-9340 1152-8190 438-1021 59-437 1-059 HINGES
NO OTHER WARRANTIES, EXPRESS OR IMPLIED, ARE MADE WITH RESPECT TO THE PRODUCTS
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE.
The provisions of this limited warranty do not apply to products: (i) used for the purposes for which they are
not designed or intended; (ii) which have been repaired or altered without Company’s prior written consent;
(iii) which have been subjected to misuse, abuse, negligence, or accident; (iv) which have been improperly
stored, installed, maintained, or operated; (v) which have been used in violation of written instructions
provided by Company to Customer; (vi) which have been subjected to improper temperature, humidity, or
other environmental conditions; (vii) which have been affected by normal wear and tear; or (viii) which, based
on Company’s examination, do not disclose to Company’s satisfaction nonconformance to the warranty.
The following costs and expenses are not covered by the provisions of this limited warranty: (i) labor costs
for the removal and reinstallation of products; (ii) shipping and freight expenses required to return products
to Company; (iii) normal maintenance; and (iv) economic losses. In addition, the provisions of this warranty
are not applicable to anything other than defects in Company’s material (products only) or workmanship.
CONSUMER PRODUCTS. With respect to “consumer products” as defined under the Magnuson-Moss
Warranty Act (“MMWA”), the following statements are made. (a) Some states do not allow limitations on how
long an implied warranty lasts, so the above limitation may not apply to you. IF ANY IMPLIED WARRANTY
IS PROVIDED UNDER THE MMWA, IT IS LIMITED TO THE DURATION OF THE WARRANTY
PROVIDED ABOVE. (b) Some states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to you. (c) This warranty gives you specific legal
rights and you may also have other rights which vary from state to state.
Commercial Customer Service: 877-671-7011
Residential Customer Service: 800-847-8688 www.ives.ingersollrand.com
© 2011
2007 Ingersoll-Rand
Ingersoll-RandCompany
CompanyLimited
Limited MS-C62
IV-2038 Rev.
Rev.10/07
1/11 Printed
Printed in U.S.A.