OBJECTIVE
To gain work experience in a dynamic environment where I can broaden my horizon by complementing my
theoretical knowledge by practical experience.
EDUCATIONAL HISTORY
2001 – 2006 Bachelors in Mechanical Engineering at GIK Institute of Engineering Sciences &
Technology, Topi. (Graduation expected in May, 2006) CGPA: 3.05/4.00
1999 - 2001 F.Sc (Pre-Engineering), Islamia College Peshawar. 878/1100
1997 - 1999 SSC, Qurtuba Public School Peshawar. 710/850
WORK EXPERIENCE
• PTC Akora Khattak Factory: Did eight weeks internship at PTC. I primarily worked in Environment
Health and Safety Department. I worked on risk assessment and updated the documents regarding risk
assessment and also worked on the CFC phase out Plan for the whole plant.
• Pakistan Petroleum Limited: Did a six week summer internship at Pakistan Petroleum Limited.
During the course of my internship I worked in Production, Operation and Mechanical Department.
TECHNICAL SKILLS
• Engineering Application Software: Pro Engineer Wildfire.
• Computational Software: Matlab, Programming C/C++.
• Μiscellaneous: MS office, windows 98/2K/XP, DOS.
COURSE PROJECTS
• Design of an HVAC system for a residence.
• Design, Kinematic and stress analyses of Geneva Mechanism using Pro-E Wildfire.
• Design and Fabrication of Four Link Mechanism.
• Design and Fabrication of Survival Kit (water Purification).
• Design of an Instant Water Heater
• Design and Fabrication of Pendulum Clock.
• Design and implementation of a Computer interfaced clock using ATMEL C2501 micro controller
• Implementation of a “Simple as possible” (SAP) computer.
• Sparse Matrix Implementation and Polynomial Solver using C++.
• Typing Tutor and Hostel Database using C++.
ABDUL BASIT
OBJE CTIVE
To use my diligence, ability to perform as a team member and strong expertise in mechanical engineering and
management skills to positively contribute towards a professional environment and to achieve desired goals.
E DUCATION
GIK Institute of Engineering Sciences and Technology Topi, Pakistan 2002-Present
BS in Mechanical Engineering (Expected Graduation May 2006) CGPA: 3.48 [7 Semesters]
Ibn Seena English High School Sharjah, U.A.E 2000-2002
Advanced Levels (Engineering) 1A & 1B
COMPUTING SKILLS
Technical Software: Pro Engineer, ANSYS, Pro Desktop, MATLAB 6.0, AutoCAD & OM Explorer
Application Packages: Visual C++, C++, MS Office, Adobe Photoshop, MS Publisher, PhotoDraw, LINUX & UNIX
o Executive Council Member & Media Council Mentor of GIKI Cricket Club (GCC)
o Executive Member of American Society of Mechanical Engineers (ASME)
o Represented GIKI at the 4th National Law School Debate (NLSIU) in Bangalore as a Resource Person
o Member Organizing Committee of 2nd & 4th GIKI Parliamentary Debates,2003 & 2005
o Member of GIKI Football Club (GFC), GIKI Football Team & Batch Cricket Team
o Participated in various dramas & Welcome 2004 as Host & Publicity Team Member
Ahsan Asad
Permanent Address: Mobile: [92] 0300-5646489
H.No. KL 367/2, St No. 2, Phone: [92] 0992-334354
Makki Mohallah, Khola Kehal, Email: ahsanasad83@hotmail.com
Abbottabad, PAKISTAN
OBJECTIVE
To work in a dynamic organization where advancements are based on achievements, aspiring to utilize
my technical skills to the maximum, while contributing to achieving a new high in company excellence
EDUCATION
Ghulam Ishaq Khan Institute of Engineering Sciences & Technology CGPA: 3.36
2002-2006
BS in Mechanical Engineering (Graduation Expected in May ‘06) Rank: 3
Iqra Academy, Abbotabad
1990-2002 Grade: A
Higher Secondary School Certificate
EXPERIENCE
• Did 8 weeks internship at Tullow Pakistan (Developments) Limited, Sara Suri Gas Field
where I worked in the production department and developed a software for the gas flow rate
calculation.
• Did 8 weeks internship at KSB Pumps, Hassan Abdal where I worked for the ISO 9001-
2000 Certification of the Foundry division of KSB Pumps
• Working as a teaching assistant in Engineering Graphics Lab for 2 semesters
SENIOR YEAR PROJECT
Study, design and fabrication of a detonation gun for the coating of alumina
MAJOR PROJECTS
• Refrigeration and Air Conditioning: Heating and cooling load calculation for a residential building
and its duct designing
• Heat transfer: Design and fabrication of a water desalination kit.
• CAD/CAM: 3-D model of a surgical instrument and its analysis in Pro-E
• Mechanical Engineering Design: Design of mobile phone, process selection for its prototype
manufacturing
• Design of Machine Elements: Design of a clock in Pro-E
• Theory of Machines: Fabrication and analysis of slider crank mechanism
• Engineering Economy: Feasibility study of a restaurant
• Computer Architecture: Implementation of a SAP computer
• Technical Report Writing: Feasibility study on establishing a milk plant
• Industrial Management: Feasibility study on manufacturing of dies with Rapid Prototyping
• C++: Developed a graphics calculator
TECHNICAL SKILLS
Pro Engineer, Ansys, Pro Desktop, C++, MATLAB, MS Project, MS Word, MS Excel, MS PowerPoint
EXTRA-CURRICULAR ACTIVITIES
• Executive Member of SPIE (GIKI Chapter)
• Executive Member of GIKI Adventure Club
• Member of the Organizing Committee of Open House(2004)
• Sports: Squash, Cricket, Volley ball and Cycling
AMEER ALI
Present Address: Permanent Address:
Room 80, Hostel 2, GIK Institute Flat no 7A 10th floor,
Topi, District Swabi, Pakistan Block A, Taj Complex Karachi
Tel. No. (0938) 71858-61 Tel. No. 0300-3059238/0235-405315
Email: u2002022@giki.edu.pk Email: ameerali9720@hotmail.com
OBJECTIVE:
To pursue a career in a dynamic and growing organization with a progressive, congenial and learning
work environment where I can explode my technical and management skills
ACADEMIC QUALIFICATION
Ghulam Ishaq Khan Institute of Engineering Sciences & Technology, Swabi
2002-2006 CGPA: 3.05
BS in Mechanical Engineering (Graduation Expected in May ‘06)
Cadet College Sanghar
1997-2002 Grade: A
Higher Secondary School Certificate
WORK EXPERIENCE
Summer 2005 British Petroleum Pakistan, Karachi
(6 weeks) Technical Mini Projects: Water handling At KHG, Decrease the ambient temperature inside the
generator shed, Tangri water Injection system. Data organization (mini projects): P&TS Library
Re-organization and Facilities Opportunities Hopper
Summer 2004 Pakistan Refinery Limited, Karachi
(6 weeks) A short visit of different Engineering sections (Stationary, Rotary Workshop, Inspection &
planning) and deals with the problems related to daily maintenance under the supervision of
respective section supervisors & Engineers
SENIOR DESIGN PROJECT
Study and the design of a working model of gaseous detonation gun for the coating
MAJOR PROJECTS
• Design and Analysis of HVAC system for two Story building
• Designed and Fabricated Omniwheel for first time in Pakistan.
• Design, Analysis and Fabrication of Solar Water Distillation Kit
• Design and fabrication of intelligent automated and manual robots
• Design and analysis of classical Wall clock in PRO/E.
• Brief reports on the study of compression with inter cooling & it effects.
• Design and implementation of SAP Computer
• Developed a LAN chatting software using VC++
TECHNICAL SKILLS
Pro Engineer, Ansys, C/C++, VC++, VB, HTML, MATLAB, MS Project, MS Word, MS Excel, MS PowerPoint
EXTRA CURRICULAR ACTIVITIES
• Represented my college hockey team in All Sindh Cadet Colleges Sports.
• Member of Volleyball team
• Cricket, Football, Horse Riding and Shooting
AWARDS AND ACHIEVEMENTS
• Attended a Short Course on Heat Exchangers by Isotherm Inc. USA;
• Member Organizing Committee for Open House 2004 held in GIKI;
• Designed a website for Cadet College;
• Topped SSC in District Sanghar;
• Awarded as the best cadet in academics in year 2001;
• Awarded as best cadet of computer science in year 1999;
• Represented my college in All Pakistan Education Festival;
HOUSE NO:450 • STREET NO: 57 • I-8/3 • ISLAMABAD
PHONE 0300-9700337 • E-MAIL fahad_rasheed@hotmail.com
OBJECTIVE
To excel in any environment that I work in and to be a part of every successful venture of my company.
My ambition is to be there at the top.
EDUCATION
2002-Present GIK Institute of Engineering Sciences and Technology Topi, Pakistan
BS in Mechanical Engineering
2000-2002 Beacon House School System, Margalla Campus Islamabad, Pakistan
Advanced Levels (Engineering)
1997-2000 Beacon House School System, Margalla Campus Islamabad, Pakistan
Ordinary Levels (sciences) 3As and 4 Bs
SUMMER INTERNSHIP
Did a six week internship at Pakistan Tobacco Company at Jehlum in summer 2005
AWARDS RECEIVED
Won the award for best project (Working replica of hydro-electric power plant) in 1997
Won best project (working model of Pin hole camera) in 1999
EXTRACURRICULAR ACTIVITIES
Executive Council Member of American Society of Mechanical Engineer (ASME).
Organized workshop on Pro-Engineer wildfire in October 2004.
Member of debating society at Beacon house.
President of Music society at Beacon house.
Worked in numerous dramas in school as well as university
SKILLS
Command over Microsoft Windows 95/98/Me/2000/Xp and Dos.
Basic knowledge of Pro Engineer Wildfire, Pro Desktop, MATLAB, Visual C++, C++, Flash
Command over Ms Office
Contact Information:
OBJECTIVE
To start my professional career in a reputed organization where I can apply my technical,
design, managerial skills and innovative approach to solve practical problems.
EDUCATION
Bachelors of Science in Mechanical Engineering
2002 – 2006 Ghulam Ishaq Khan Institute of Engineering Sciences & Technology, Topi, Pakistan
CGPA: 2.64
F.Sc. Pre-Engineering
2000 – 2002 Govt. Forman Christian College Lahore, Pakistan Grade: A
Matriculation
1998 – 2000 Govt. High School, Allama Iqbal Town Lahore, Pakistan Grade: A+
WORK EXPERIENCE
Packages Ltd. Lahore, Pakistan
June 05 – July 05 Prepared the feasibility for the solvent recovery unit for gravure printing machines
Studied the design parameters of the heating system of a gravure printing machine
Millat Tractors Ltd. Lahore, Pakistan
June 04 – July 04
Reviewed and suggested changes in line balancing to increase the efficiency of the production
line.
FINAL YEAR PROJECT
Study, Design and Implementation of Thermo-Mechanical Surface Hardening by Revolving Friction Disk
PROJECTS
CAD/CAM Modeling, Structural Analysis and Generation of GM-Codes for Pliers in Pro-Engineer
Design of Machine
Designed a Clock and prepared its Virtual Prototype in Pro-Engineer
Elements
Theory of Machines Developed an inversion of the Slider Crank Mechanism in Pro-Engineer
Mechanical Design of a Mobile Phone and Process Planning for its prototype manufacturing using Pro-
Engineering Design Engineer
Engineering
Economic Analysis for a Restaurant to Start Free Home Delivery Service
Economy
TECHNICAL SKILLS AND INTERESTS
Pro Engineer, ANSYS, Auto Cad, Mechanical Desktop, CNC programming of Lathe and Milling
Technical Software
machines
Interest Areas Manufacturing Technology, Computer Aided Design and Manufacturing
Adobe Photoshop, MS Project, Microsoft Office, C++, Visual C++, 3D Studio Max, Macromedia
Tools
Flash
Others Project Management, Operations Management, Industrial Management
A-406, Block 15, Gulistan-e-Jauhar A challenging and illustrious career in a competitive environment where I can
Karachi, Pakistan. practically apply and improve upon the analytical and technical skills acquired
Tel. #: +92-21-4617046, +92-3002441936 by my education to the company’s benefit and my own satisfaction
Email: imjim786@hotmail.com
Ghulam Ishaq Khan Institute of Engineering Science & Technology, Topi, Pakistan
Bachelor of Mechanical Engineering, CGPA: 3.24 / 4.0
ACADEMICS
Hamdard College of Science and Commerce, Karachi. Sarfraz Higher Secondary School, Karachi.
F.SC. (2000-2002) 907/1100) 82.45% Marks S.S.C. (1998-2000) (750/850) 88.235%
Technical Internee Klien, Schanzlin & Becker Pumps Company, Hasanabdal
Internee Training for 2½ months at KSB Production Facility in Design and Quality Department.
Determination of Performance Characteristics of Centrifugal Pumps
Time & Motion Study of various parts of different pumps.
W O R K E X P E R I EN C E
Programming . . .
TURBO C++ PRO ENGINEER2001, WILD FIRE 2.0
SKILL SET
OBJECTIVE
Seeking a challenging and interesting job in the field of mechanical engineering
EDUCATION
GIK Institute of Engineering Sciences and Technology, Topi-23460, Pakistan
Bachelors of Science in Mechanical Engineering, Graduation in May 2006
Cumulative GPA 3.15/4.00
EXPERIENCE
Intern Engineer, Honda Atlas Cars (Pakistan) Ltd, Lahore, Pakistan, June 2005 – July 2005
• Compiled a detailed report for tasks performed at each workstation.
• Pointed out on “Just in Time” and Kan-Ban techniques which were not being implemented.
• Delineated various improvements in the production department
Laboratory Assistant, GIK Institute, Topi, Pakistan, January 2005 – May 2005
• Assisted Professor for Engineering Design course (ME-102)
• Graded laboratory assignments, and conducted laboratory final exam
Intern Engineer, Juffali Brothers, Mercedes Benz Division, Jeddah, Saudi Arabia, June 2004 - August 2004
• Designed and fabricated a seat lifting device to improve the handling process for the seat insertion
into the cabins of the trucks on the production line
• Identified problems in the CKD (Completely Knocked Down) Department
• Member of project manager’s Kaizen team
Intern Engineer, Al-Hidada Steel Fabricators, Xenel, Jeddah, Saudi Arabia, May 2003 - July 2003
• Worked on projects of Snamprogetti and constructed material take-off lists
• Developed a time and motion study on drilling, sawing, welding, galvanizing , grinding and
punching techniques
COMPUTER SKILLS
C++, Visual C++, Pro-Desktop, Pro Engineer Wildfire, MDSolids, Windows 95/98/XP/NT, Microsoft Office
PROJECTS
Geothermal Air conditioner, sponsored by ASHRAE International and HVACR Society, Pakistan
• Designed and fabricated a geothermal air conditioning unit
• Used cold water in underground reservoirs to achieve thermal comfort zones
• Ability to conserve sixty percent of energy
• Highlighted awareness for the first time in Pakistan
Pertinent projects implemented during coursework:
• Air-Conditioning: Calculated peak heating and cooling loads for an Air conditioning unit and
designed its ducting for a double storey building
• Heat Transfer: Designed and fabricated a Portable Solar Water Purifier for life guard kit
• Mech. Eng. Design: Mold design for an injection molding machine
• Mechanics of Solids: Analysis of structures under combined loadings
ACHIEVEMENTS/ACTIVITIES
• Awarded the Deans Honor Roll for the semester Spring 2004
• Awarded the Deans Honor Roll for the semester Spring 2005
• Member of the A.S.M.E – GIKI Chapter Society
• Member of the team Project Topi that involves its members in various voluntary social activities.
Jawad Ahmad Khan
H. No. B-6, Street 1, PMO Colony,
Taxila Cantt, District Rawalpindi, Pakistan.
Ph No. 92-51-52611077, Mobile No. 92-321-5166261
Email: jawad84@gmail.com, u2002070@giki.edu.pk
OBJECTIVE
To work in a growing and dynamic environment to gain experience in technical and
managerial skills by applying my theoretical knowledge into practical form
EDUCATION
Aug 2002 – To date Bachelor of Science in Mechanical Engineering
Ghulam Ishaq Khan Institute of Engineering Sciences & Technology, Topi, Pakistan
Graduation: May 2006
WORK EXPERIENCE
Jul 2005 – Aug 2005 Tullow Pakistan (Developments) Ltd, Dhairki
Duration: 6 Weeks
SKILLS/INTERESTS
Technical Skills Pro Engineer | Wildfire & | 2000i2, Mechanical Desktop, Microsoft Visual Basic 6.0,
Microsoft Visio 2000, C/C++ programming, PSPICE(circuit simulation software),
Macromedia Flash, Adobe Photoshop, Ulead Video Editor, Microsoft Office
Interest Areas Oil and Gas Exploration, Internal Combustion Engines, Computer Aided Design
Manufacturing and Automobile Industry
SEMESTER PROJECTS
• Design of turbochargers used in automobiles
• Design of remote controlled aircraft model
• Design and fabrication of a portable solar water purifier (Survival kit)
• 3D Modeling and structural analysis of piston cylinder engine in Pro-Engineer
• Design and implementation of simple as possible computer lab project
• Worked on lathe machine, milling machine and shaper machine
• Feasibility report on setting up an industry in Gadoon Amazai
ACTIVITIES/ ACHIEVEMENTS
• Executive Member of American Society for Mechanical Engineers (ASME) GIKI Chapter
• Awarded appreciation letter by Tullow Pakistan Ltd on Internship Project
• Participated in 4th All Pakistan Youth Theatre Festival organized by Rafi Peer Group
• Participated in 1st All Pakistan Art Gala organized by Naqsh Art Society, GIKI
• Participated in 5th & 6th All Pakistan Drama Festival organized by CDES, GIKI
• Executive Member of GIKI Media Club
• Executive Member of GIKI Cricket Club
• Coordinator of GIKI Lawn Tennis
• Sports: Lawn Tennis, Squash, Swimming and Volley Ball
Khalid Ahmed
Internships
June 2005 Unilever Pakistan Ltd Supply Chain Dept (12 weeks)
June 2004 National Refinery Ltd Maintenance Dept (8 weeks)
June 2003 Pakistan PTA Ltd Inspection Dept (6 weeks)
Scholastics
Year Qualification Institute
GIK Institute of Engineering
PERSONAL BS in Mechanical Sciences and Technology –
2006
INFORMATION Engineering Topi
(currently enrolled)
Objective
St Patrick’s High School,
Working at an 2002 A-levels
organization that offers Karachi
maximum exposure. I 2000 O-levels The City School, Karachi
seek avenues for growth ACHIEVMENTS AND AWARDS
and challenges to be • Member of Students’ Council, St Patrick’s High School (2001-2002)
met to achieve my • Member of Students’ Council, The City School (1994 - 2000)
potential • Winner of the Academic Excellence Award at Ordinary Level
Father’s Name • Secured Top Position for 6 consecutive years among all branches of
Niazuddin Ahmed The City School, Karachi
Date of Birth • Distinction in English and Mathematics in the University of New South
February 24, 1983 Wales’ International Assessment for Schools
Address • Won a Quiz Competition organized by KANUUP Institute of Nuclear
C-3/5 Alhamra Square Power Engineering
Block ‘E’ FINAL YEAR PROJECT
North Nazimabad Optimization of Hand Dryer Design
Karachi SEMESTER Projects
Telephone • Construction of a Portable Water Desalination Survival Kit
0345-2898736 • Design of a Permanent Magnet Motor
(021)-6633571 • Design of a Continuously Variable Transmission System
Email • Economic Comparison of CNG and Petrol-driven cars
ahmed_khalid@msn.com Extra Curriculars
Field of Interest • Executive Member of AIAA GIKI Chapter
Maintenance & • Successfully organized various events under the AIAA banner
Inspection / Supply • Incharge of Supreme Tea Sales Team during the Lifestyles Exhibition at
Chain Expo Center, Karachi (2005)
• Member of Executive Management Team of The Open House and
Career Fair (2005)
• Member of GIKI Sports Team in the GIKI-LUMS Fixture (2005)
• Member of Drama Team at The 4th Shell-Helix Youth Theatre
Festival held at Alhamra Arts Council, Lahore (2005)
• Member of Drama Team at The All Pakistan Drama Festival held at
GIKI (2004)
• Member of Mime Team at The All Pakistan Art Gala held at GIKI (2004)
• Member of GIKI Squash Team
• Member of Debating Team, The City School (1992 – 2000)
• Organized Farewell for the Class of 1999, The City School
Skills and interests
• Exceptional interpersonal skills
• Valuable team player and an eager and avid learner
• Playing Squash, Table Tennis and Badminton
Permanent Address: Qadri Mobile: [92] 0300-6993776
OBJECTIVE
To work in a professional environment where I can practically apply and improve upon various technical,
management and decision making skills acquired during my academic career.
EDUCATION
Ghulam Ishaq Khan Institute of Engineering Sciences and Technology Topi, Pakistan
Bachelors of Science in Mechanical Engineering (May 2006)
DHA Degree College for Men Karachi, Pakistan
FSC (Pre-Engineering), 2002 Marks: 856/1100
DHA Model High School Karachi, Pakistan
SSC, 2000 Marks: 697/850
INTERNSHIP EXPERIENCE
Pakistan Tobacco Company Ltd, Akora Khattak Factory
Objective
To help a firm stand head and shoulders above its competitors through innovation and by strengthening its technical/
managerial areas and get rewarded in return.
EDUCATION
2002-Present GIK Institute of Engineering Sciences and Technology Topi, Pakistan
B.S., Mechanical Engineering (4 years Program), CGPA 3.05/ 4.0
2000-2002 Cadet College Hassanabdal , F.Sc., Pre-engineering , Grade A+
EXPERIENCE
Summer 2005 KSB Pumps Ltd. Hassanabdal, Pakistan
Internee at KSB Production Facility in Design and Quality Departments. Voluntarily worked on the determination of
performance characteristics of centrifugal pumps.
Summer 2004 GIK Institute Topi, Pakistan
Development of new experiments on the existing lab apparatus and thorough revision of lab handouts. Changed the lab
setup to make it more interesting and fruitful for the students.
Summer 2003 Carrier Telephone Industries (Pvt.) Ltd. Islamabad, Pakistan
Served as an internee in Production Engineering department of the company. The company management implemented
the layouts that I designed for various departments and the endeavors were highly appreciated.
Lab Assistance GIK Institute Topi, Pakistan
Assisted the Engineering Drawing lab course in spring 2005 and introduced the usage of softwares for drafting.
FINAL YEAR PROJECT
• Designing and Fabrication of a Micro Hydro Power Plant to be commissioned for commercial use
• Model Testing of a Pump as Turbine and application of Similitude techniques for Turbine Selection
• Draft Tube Study, Metallurgical study and Manufacturing Drawings of Components in Pro-E Software
• Software Development for PAT (Pump As Turbine) Selection
SEMESTER PROJECTS
• A project on developing an ‘eight puzzle’ in Visual C++
• Design of an efficient, cost effective, single-seater car with battery as a source of power
• Complete design and automation of a shock-absorber system in Pro-E and generation of G-codes for its
manufacturing
• Programming CNC lathe and milling machines for the manufacturing of a complex model
• Design of a Micro-controlled crane capable of reading bar codes
• Construction of a cost effective, portable, solar water purifying system
• Complete economic and feasibility study of the installation of a milk plant in Topi
• A technical report on “Industrialization and its value for a nation.”
COMPUTER SKILLS
• Operating Systems: MS Windows 98/Me/2000/XP
• Computer Languages: Turbo C++, Visual C++, APT (CNC programming)
• CAD Packages: Pro-Engineer Wildfire 2.0, AutoCAD, Mechanical Desktop
• CAD/CAM Experience: Generation of G-codes through Pro Engineer and a hand on experience of CNC
Machines
• Analysis Packages: ANSYS
LINGUAL SKILLS
• Speaking, writing, listening skills in : English, Urdu, Persian, Punjabi
• Participated in Intra-GIKI English Parliamentary Style Debates, 2004
• Had three articles published in Abdalian ( college magazine) and Horizon (university magazine)
• Delivered presentations at various seminars and workshops
• Achieved subject prize in both English and Urdu at Cadet College Hassanabdal
• Organized and participated in College Morning Assembly Speeches
EXTRA-CURRICULAR/ COMMUNITY ACTIVITIES
• Led event publicity team for GIKI 10 years celebrations and made it a huge success
• Led Farewell 2004 publicity team and introduced new publicity dimensions
• Participated in All Iran Calligraphy Exhibition held at Vahdat Hall, Qum, 1998
• Participated in 2 All Pakistan Drama Festivals and 4 intra-GIKI Drama Competitions
• Member Batch Basketball team
• Member of various clubs at Cadet College Hassanabdal (including Horse Riding club, Calligraphy Club, gymnastics club)
Muhammad Emad Alamgir
Address: 3-A, Gulnaster Road, Central Park, Wah Cantt
E-mail: emadalamgir@hotmail.com
Phone: (92) 051 9314101-23276 Mob: (92) 0300 5198700
OBJECTIVE
To pursue a challenging career in a professional organization by contributing constructively and fusing academic
knowledge with practical experience while enhancing my engineering, interpersonal and managerial skills
EDUCATION
WORK EXPERIENCE
Design and Fabrication of a Hovercraft: The main emphasis was on the lift and stability of the Hovercraft
SEMESTER PROJECTS
Heat Transfer Designed and fabricated a portable solar water desalination plant
Design of Machine Elements Design and analysis of gears and gear trains
Project Management Case Study of Automation of a hospital
IC Engines Detailed study of working and manufacturing of a spark plug
Technical Feasibility Report Setting up a milk plant at Topi
Alternative Case Study Missile technology of Pakistan and India
Internship Project Detailed study and report on corrosion problem in the industry
PROFESSIONAL SKILLS
PERMANENT ADDRESS
Al-Rahim, 36- M, Johar Town. Lahore, Pakistan
Email: jamalrahim@gmail.com
Phone #:+92-300-9457794 , 92-42-5303435
OBJECTIVE
A challenging career in a competitive environment where I can practically apply and improve upon the technical and
managerial skills acquired by my education to the company’s benefit and my own satisfaction
EDUCATION
Ghulam Ishaq Khan Institute of Engineering Sciences and Technology (GIKI)
Bachelor of Science, Mechanical Engineering, September 2002- May 2006
Aitchison College, Lahore.
Advance -Level / Ordinary - Level June 2002/ June 2000
W ORK E XPERIENCE
ASHRAE International and HVACR Society Pakistan June 2006
Have Designed Geo Thermal Air Conditioning (GTAC)for this Internationally renowned company for technology . GTAC
,an Air conditioning System will be “ First “of its kind in Pakistan , as it is run by Water, through this we will be able to save
sixty percent of energy but also manage to reach the thermal comfort level
HACPL (Honda Atlas Car Pakistan) June 2005-July 2005
• Designed nozzle to reduce the number of sputtering and coolant leakage for different type of spot guns.
• Identified problems in Completely Knocked Down (CKD) department which in turn changed shipment techniques
from Thailand.
• Also introduced KAN BAN system which increased the production efficiency. Pointed out some aesthetic defects
which were due to engineering problems like welding and paint shop.
Prime Packages July 2004- August 2004
Developed a time and motion study on die making, cutting, printing, labeling and packing which helped them in changing
the factory layout which in return reduced per unit time and cost.
Oxfam (European NGO) September 2002- To Date
Executive member, helped in construction of different schools in the area of Topi and we were the first one to build a school
for Earthquake victims in Balakot area, with initially 250 students enrolled.
Mechanical Engineering Jan 2004-June 2004
• Assisted Mechanical Engineering Graphics Course (ME102) conducted Lab final and graded assignments.
• Updated Mechanical Engineering lab manuals(ME-241; May 2004- June 2004)
COMPUTER SKILLS
Experience in C, C++ and Visual C++, MS Office and accessories.
Experience in Pro Desktop, Pro/E Wild Fire, Ansys
SEMESTER PROJECTS
Refrigeration &Air Conditioning: Designed an Air conditioning system and duct design for the double story
building.
Heat Transfer: Portable Solar Water Purifier for life guard kit.
Mech. Eng Design: Mold Design for a Plastic Gear for injection molding Machine.
Mechanics of Solid: Designed and modeled truss bridge and its analysis under different
conditions.
A C H I E V E M E N T S / A W A R D S:
Objective: To obtain a challenging internship in a reputed organization where I can apply my knowledge
on diverse projects and exploit my potential.
Experience:
Pakistan Tobacco Company Limited (ptc) Jhelum,Pakistan. July- August 2005
Performed a detailed study on the cooling system implemented then done a detailed
analysis and calculations of cooling load of semi manufacturing department. Also worked
on the ways to directly reject heat of main heat dissipated sources in machines outside the
department.
Attended a short course on operation and maintenance of heat exchangers. (In G.I.K.I).
December 2005
Semester Projects:
• Designed a hydraulic system for buses to bring the gate down to the level of the footpath for
prams of children and old age people’s cycles.
• Design of shaft and gears.
• Designed a water purifier working by solar light.
• Designed a traffic light controlling system (Stem Project)
• Constructed a SAP using various IC’s
• Programmed a graphics based piano in C++
• Analysis of structures under combined loadings
Computer skills:
• C++, Visual C++
• Pro Engineer
• Matlab
• MS office, Windows 95/98/XP/NT
Activities:
• Sports: Badminton, Gym
• Volunteered in organizing all Pakistan Softcom Competition at G.I.K.I.
MUHAMMAD TAYYAB
Postal Address: House#190, street#73, I-8/3, Islamabad
Phone no: 051-4435656, Mob No: 0300-5007137
E-mail: tayyab.waheed@gmail.com
OBJECTI VE
To work as a team player in a Dynamic and leading edge Organization, and not only
t o wo r k b u t t o b e o n e o f t h e k e y t o o l s o f t h e O r g a n i z a t i o n .
EDUCATION
-GIK Institute of Engineering Sciences & Technology, Topi, Pakistan.
Bachelor of Mechanical Engineering (2002-2006)
-Cadet College HassanAbdal,
Fsc pre-engineering (marks obtained: 731/1100) (2000-2002)
-Cadet College HassanAbdal,
Matriculation (marks obtained: 726/850) (1997-2000)
M A J O R S & S E P C I A L I ZA T I O N
• Computer aided designing and manufacturing
• Introduction to Finite elements methods.
• Application and selection of materials.
• Design of Machine Element.
SENI OR YEAR PROJECT
S t u d y a n d a n a l y s i s o f b o l t e d f l a n g e d p i p e j o i n t s : d o i n g a n a l ys i s o f b o l t e d f l a n g e s p i p e
j o i n t s . A n a l y s i s i s d o n e i n A n s y s 9 . 0 . A n d r e s u l t s o f b o t h a n a l ys i s a n d e x p e r i m e n t s a r e
compared in the end.
E XP ER I EN C E
• -International polymer industries: (8 weeks Internship, summer 2003).
• -Victory pipe Industries: (8 weeks Internship, summer 2004).
• -International Industries Ltd. (8 weeks internship, summer2005).
S EMESTER PRO JECTS
• CNG Rickshaw : fitted CNG kit in a qingqui motorcycle.
• Technical report: compiled a feasibility report on setting up a CNG station in TOPI.
• 8-bit computer (SAP-1): assembled an 8- bit computer SAP-1 at Hardware level.
• S o l a r w a t e r p u r i f i e r : m a d e a w a t e r p u r i f i c a t i o n s y s t e m b y u s i n g s o l a r e n e r g y.
• 8-puzzle game: developed by using VC++ by implementing trees.
P RO F E S SI O N A L S K I L L S
• Programming Languages: C, C++, Vis ual C.
• Technical Report and Letter Writing: MS Word, MS Excel, MS project.
• Simulation softw are: Proe Wildfire, pro Mechanica, Ansys9.0, Adobe Photoshop.
EXTRA-CURRI CUL A R ACTI VI TI ES
• Executive member of cultural dramatics and entertainment society (2005-2006).
• Member American society of mechanical engineering.
• Member Organizing Committee for following events.
All-Pak 2003, All Pak 2004, All Pak 2005, All Pak 2006.
Sports: captain college cricket team at HassanAbdal.
Vice-captain wing football team at HassanAbdal.
Member College riding team.
Member university hockey team.
AWARDS / ACHI EVMENTS
• Represented GIKI at 4th Youth Th eatr e F estival, Rafi Peer Works hop (Alhamra Lhr,
04).
• Member of Best Drama Team in 6th All-Pakistan. Drama Festival held at GIKI.
• Section Commander Aurangzeb Wing at HassanAbdal (2002).
• President Aero modeling club at HassanAbdal (2002).
• Selected by Shell Tameer in its business proposals contest and was ranked in top
ten all over Pakistan
• Certificates in swimming, riding and athletics.
NAUMAN NOOR ALI SHAH
PRESENT ADDRESS PERMANENT ADDRESS
Room-43, Hostel-2, Ghulam Ishaq Khan Institute of C/o Mr. Asad Ali Shah, House # 39, Street #3, J-3,
Science & Technology Topi, District Swabi, Pakistan Phase II, Hayatabad, Peshawar, NWFP, Pakistan
Tel. #: +92-0938-271858, Cell # +92-03015945090 Tel. #: +92-091-5840192,
Email: u2002127@giki.edu.pk Email: shah4720@hotmail.com
OBJECTIVE
“To implement my utmost motivated qualities in the competitive
environment and in addition to this, to excel in managerial and
technical qualities as”.
WORK EXPERIENCES
• Appointed as Lab Instructor in the Undergraduate Engineering Designs Lab for the current
semester
• Internship for summer, 2005(19thJuly-5th August):
Organization: Pakistan Petroleum Limited (PPL)
Department: Production Department (P.D.) Duration: 3 weeks
Training: Well completion
• Internship for summer, 2005(1stJune-13th July (Evening shift)):
Organization: Aftab Technologies (PVT.) LTD
Department: Production Engineering Department (P.E.D.) Duration: 6 weeks
Training: Time Motion Study, Sheet Metal Parts, Part Manual Preparation & Production planning
• Internship for summer, 2005(1stJune-13th July (Morning shift)):
Organization: Simcon International (PVT) LTD. The House of CAD / CAM / CAE / PLM
CO-CURRICULAR
• AGeneral
Being the CTIVITIES / ACHIEVEMENTS
Sectary of GIKI Environmental Awareness Society
• Currently Coordinating Athletics Society at GIKI (Ghulam Ishaq Khan Institute)
• Currently Vice -Captain GIKI Football team
• Won various certificates of participation in Naqsh Art Galas at GIKI
• Member of Drama Team which represented GIKI at All Pak Al-Hamra Drama Festival Lahore
• Acted in various dramas, plays and mass events
• Active member in Parliamentary Style Debates at GIKI
• Honored to be the Coordinator of Fatimid Foundation Blood & Hematological Services Peshawar
• Member Organizing Team All Pak Softcom 03 and Softcom 04
• Represented and organized GIKI Football team At GIKI – LUMS Fixture for consecutive 3.5 years
SIDRA TUFAIL
Email: sidratufail@hotmail.com, u2002157@giki.edu.pk Phone: 0300-4432012, 042-6674967
Permanent Address: 182 - B, Street # 4, Cavalry Ground, Lahore Cantt 54833, Pakistan
University Address: Room # 42, Hostel 7 (Girls’ Wing), GIK Institute Topi (23460), Swabi, NWFP
OBJECTIVE
I aspire to augment to my existing knowledge the dynamism of professional experience, hence enriching my knowledge and skills and
making myself triumphant in the quest for excellence in my field.
EDUCATION
• Ghulam Ishaq Khan Institute of Engineering Sciences and Technology (GIK Institute), NWFP
Degree: Bachelors, Mechanical Engineering (August 2002 – Present)
CGPA: 3.27/4.00, SGPA: 3.71/4.00 Class Rank: 5/48
• Lahore Grammar School (LGS), DHA, Lahore
Advanced Level (2000 – 2002) Grades: 3 As, 1B
• Convent of Jesus and Mary (CJM), Lahore
Ordinary Level (1998 – 2000) Grades: 8 As, 3 Bs
EXPERIENCE
• Procter and Gamble (PnG – Pakistan) 8 Weeks Intern, Summer 2005
Department: Product Supply-Manufacturing (Karachi)
Projects: Worked on a total of five projects: Redesign of the piping system of dosing loops at the bar soap manufacturing
plant (Hub Industrial Estate), Steam Consumption and Dryer Optimization, PuR Sachet Leak Project, Development of a
Validation Protocol for a sanitization process and Size Changeover Activity according to the PDSA cycle.
• Descon Engineering Limited 5 Weeks Intern, Summer 2004
Departments: Project Planning and Proposals/Quality Assurance and Quality Control (QA/QC) (Lahore)
Projects: Worked on the format of a Technical Proposal Folder, got training in Primavera Project Planner Software used for
project scheduling, got working knowledge of Quality Standards (ISO 9001:2000)
• Packages Private Limited 6 Weeks Intern, Summer 2003
Department: Flexible Packaging (FP) (Lahore)
Projects: Conducted a time and motion study and reduced printing machine downtime during preparation by fifty percent;
conducted a practical study of the material and process of paper slitting machines and improved blade design
• World Wide Fund for Nature (WWF-Pakistan) 6 Weeks Intern, Summer 2001
Department: Policy (Head Office, Lahore)
Projects: Correspondence format development, research on causes of contamination of the Indus River
TEACHING EXPERIENCE
• GIK Institute One Semester (ongoing) Engineering Drawing Lab, 2006
Currently assisting Engineering Drawing Lab being conducted for the freshman year
SEMESTER PROJECTS
• Senior Year Design Project (ongoing): Design and fabrication of a Cold Gas Dynamic Spray System (CGDS). This is
a thermal spray system capable of forming coatings by bombarding particles at supersonic conditions on
substrates, forming coatings with low porosity, low residual stresses, low oxidation and very high bond strength
• Hydraulic Dredging System for desilting of river beds using conceptual, embodiment, parametric design steps
• Modeling, Structural Analysis and Computer Aided Manufacturing (CAM) of a Steam Engine Mechanism in Pro-Engineer
Wildfire v.2 and Pro-Mechanica Wildfire 2.0 (TM)
• Design selection and fabrication of a Water Desalination System capable of purifying brackish water by radiation
• Design and assembly of a Chain-Sprocket Mechanism for a mountain bike using Pro-Engineer Wildfire v. 2
• Modeling and kinematic analysis of a four bar linkage (kinematic chain)
• Mathematical and structural analysis of beams of various cross sections (I-section, T section)
• Economic and feasibility study of the purchase of the fleet of Boeing 777 by PIA
• Computer Architecture: Design and Implementation of an Arithmetic Logic Unit (ALU) using basic logic gates
TECHNICAL SKILLS
Design and Simulation: Pro-Engineer Wildfire v.2, Pro-Mechanica Wildfire 2.0 (TM), Pro-Desktop
Application Packages: MS Office Tools and Programming Languages: C++, Visual C++ (Basic Level)
ACHIEVEMENTS/OFFICES HELD
• Scholarship holder for four years Bachelors program, GIK Institute
• Dean’s Honour Roll and topper of class for Fall, 2005
• President, Women Engineers’ Society (WES), GIK Institute
• Head Publications, American Society of Mechanical Engineers, (ASME-GIKI Chapter)
• Executive Member, The Cultural, Dramatics and Entertainment Society, CDES
• English Editor, Annual School Magazine, Lahore Grammar School (LGS)
• Captain, Student Council, Convent of Jesus and Mary (CJM)
CO-CURRICULAR ACTIVITIES AND AWARDS
• Won shield for “Best Performance” in the Intra GIKI Drama Competition, 2003
• Won two awards for “Best English Writer” (serious prose) in Intra GIK Prose and Poetry Competition (2003 and 2005)
• Won medal for “Best Research Analyst” in the Water Conservation and Awareness Program (WCAP)
• Won “Poet of Merit Award”, International Society of Poets, Washington DC (was also invited for elocution)
• Won shield in the GIK Institute Basketball Association’s (GBA) Basketball Tournament
• Event Coordinator, Freshmen Entertainment Night and Concert (2005)
• Part of Organization Team of Heat Exchangers Workshop in collaboration with Isotherm Inc. in GIK Institute
TAHA SAJJAD KAZMI
CONTACT INFORMATION
Present Address: Room # 70, Hostel # 5, GIK Institute, Topi 23460, District Swabi, Pakistan
Permanent Address: A-202, Block-C, Gulshan-E-Jamal, Karachi, Pakistan
Email: taha_kazmi@hotmail.com
Phone: Home: (021) 4589196, 4596817 Cell: 0300-2538857
CAREER OBJECTIVE
An entry-level position as a mechanical engineer with emphasis on technical knowledge,teamwork,
management and communication skills.
EDUCATION
2002 – Present GIK Institute of Engineering Sciences and Technology Topi, Pakistan
BS in Mechanical Engineering CGPA 2.76/4.0
2000 – 2002 Aga Khan Higher Secondary School Karachi, Pakistan
WORK EXPERIENCE (INTERNSHIPS)
Jun – Jul ’05 Engro Chemical Pakistan Limited Daharki, Pakistan
• Worked with the maintenance team which supervised major repair work at a Cooling Tower.
• Prepared a detailed failure analysis report which covered the possible reasons for failure and presented
remedies which were actually implemented on site.
• Prepared a cost estimate for the project which portrayed the actual cost incurred contrary to the demand of
the contractor. The company thus saved money.
• Maintained punctuality and healthy relations with the employees.
Jun – Jul ’04 Pakistan PTA Ltd, a member of the ICI worldwide Group Karachi, Pakistan
• Performed a detailed case study on a compressor.
• Gained hands-on experience during Mini-Shutdown Jul ’04, in which overhauling of major equipment was
carried out.
FINAL YEAR PROJECT
‘Heat pipe optimization for microprocessor cooling’. Fabrication of a microchannel based heat pipe for
economical and highly efficient heat dissipation to meet the cooling requirements of the upcoming super-
fast breed of microprocessors.
SEMESTER PROJECTS
• Refrigeration and Air Conditioning: Based on HVAC calculations, designed a duct for a two storey
building to meet the cooling requirements for peak loads in summer.
• Heat Transfer: Constructed a portable and cheap water purification kit.
• Industrial Management: Study of pre-fabrication design of a Permanent Magnet Motor.
• Design of Machine Elements: Chain Selection and Sprocket Design for a bicycle.
• Operations Management: Learnt useful tools pertaining to Capacity and Layout Planning, Inventory
Management and Forecasting.
• Engineering Economy: Economic Analysis of Various Electric Power Alternatives.
• Technical Writing: Prepared a feasibility report for setting up a milk plant in Topi.
SPECIAL SKILLS
• Good presentation and communication skills and an adept team player.
• Proficient at MS Office XP, Pro/E Wildfire 2, Macromedia Flash and Adobe Photoshop.
AWARDS / ACHIEVEMENTS
• Selected as the GIKI squash team captain and represented my institute at the LUMS – GIKI sports
fixture 2005.
• As a member of ASME, was part of the publicity team which advertised the society events over the
semester. Also assisted a workshop on Pro/E.
• Selected as captain of GIKI team in the first ever University Level National Gaming Tournament,
über.gameX 2004.
• Obtained scholarship in matriculation by getting 3rd position in the board.
• Member of the batch Swimming Team which won the Inter-Batch Swimming Competition 2004.
• Member of the College Football Team which won silver in Inter-College Football Tourney ’02.
• Have written for Dawn Spider Magazine.
• Sports captain at my school.
• Hosted the senior batch farewell party at my college.
• Participated in and won GIKI Photography Competition. Pictures I took have been placed at the university
website: www.giki.edu.pk
HOUSE NO:6 • STREET NO: 4 • G-6/3 • ISLAMABAD
EXTRACURRICULAR ACTIVITIES
Media Council Head and Executive Council Member of GIKI Cricket Club (2003 – 2005)
Treasurer and Publicity Manager, ASME (2003 – 2005)
Executive Member of NAQSH Arts Society
Member Organizing Committee of 4th GIKI Parliamentary Debates, 2005
Member Organizing Committee of 1st NAQSH Art Gala 2003
Participated in various Drama Competitions at GIKI
OBILE 0300-5002508 • PHONE 051 - 5110508 • E-MAIL talha_13@hotmail.com
UMAR FAROOQ QAZI
Present address:
Farooq A Qazi
Engro Chemicals Daharki, Pakistan
Tel. No. (0723) 641290
Mob No. 0300 9315963
Email: qazi_omar@hotmail.com
Objective: Seeking a carrier which allows me to hone my technical and managerial skills
Semester Projects:
Feasibility study of different Power plants
Calculated heating and cooling loads and designed ducting for a double story building
Designed and fabricated a portable solar water purifier kit
Designed a rotary shelf refrigerator for domestic use
Electives:
Power Plant Total Quality Management
IC Engines Industrial Management
Air Conditioning and Refrigeration Project Management
System Dynamics and Control Sociology and human behavior
Circuit Analysis I Electronics I
Computer skills:
Circuit Analysis using PSpice
Familiar with Pro Desktop and MD Solids
Extensive knowledge of several applications including MS office
Co-Curricular Activities:
Member of GIKI hockey team
Assisted in Coordinating farewell 2004
Captain of Football team, Sadiq Public School
Participated in Gymnastics and horse riding, Sadiq Public School
.
Uzair Shahid
Current Address Permanent Address
Room 23, Hostel 6 40-X, Phase III, D.H.A
GIK Institute, Topi, Lahore Cantt, Lahore
Distt. Swabi, N.W.F.P Tel: 042-5723796
E-mail: uzair.shahid@gmail.com Mobile No: 0300 - 4797
957
OBJECTIVE: To obtain technical and management experience in a stimulating workplace, to attune my knowledge with
practical experience, whilst adding value to the company.
EDUCATION: GHULAM ISHAQ KHAN INSTITUTE OF ENGINEERING SCIENCES & TECHNOLOGY Topi, Pakistan
Bachelor of Science in Mechanical Engineering, CGPA: 2.47 Graduation in May’06
EXPERIENCE:
• Summer 2005: Internship at Pakistan Tobacco Company (PTC), Jhelum Factory for 6 weeks. Projects
assigned and completed include:
a.) Waste calculation on Secondary Manufacturing Department floor and
submission of report recommending waste reduction procedures.
b.) Determination of one day stock requirements for production of 45, 50 and 55
million cigarettes at optimal performance, and forming layouts for possible
locations.
• Summer 2003: Internship at DESCON, Lahore for 6 weeks with the demand and supply chain sections.
• Summer 2001: Interned with Audit team at Qadeer and Company, Chartered Accountants Lahore, for 6
weeks.
SEMESTER PROJECTS:
• Programming and implementation of various work-pieces in CAD systems.
• Design and practical implementation of a customized reclining trike.
• Complete design and automation of a piston cylinder system in Pro-E.
• Construction of a cost effective, portable, solar water purifying system
• Design and understanding of a simple wall-clock, with design done in Pro-E.
• Complete economic and feasibility study of the improvement of GIKI medical center and Swabi hospital to
accommodate more patients and provide better services.
• A technical report on the “The role of Multinational Companies in the Economy of Pakistan.”
• A project on developing a “Program Scheduler” in Visual C++.
COMPUTING SKILLS:
• Strong Command over MS Office & Windows 98/2000/XP.
• Functional experience of AutoCAD, Pro-Engineer & Pro-Desktop
• Familiarity with programming in C++ & Visual C ++
AWARDS/ ACHIEVEMENTS:
• Member of the Literary & Debating Society (LDS), GIKI.
• Publicity In charge for the 1st International Debating Competition at GIKI.
• Editor of the GIKI Magazine and Newspaper society, (Horizon.)
• Member of the ASME, GIKI chapter.
• Member of runners-up team at NUST-EME Debating All-Pakistan event.
• Member of two time winning inter-batch debating team at GIKI.
• Member of a two time winning GIKI Open Parliamentary style debating team.
• Achieved a regional distinction in Human Biology during O’ levels.
• Head boy of the college body & Deputy Head boy of the school body.
• Awarded best performance award in Defence Public School (DPS) Lahore, cricket tournament.
• Captain of the School and college cricket teams.
WASIL AMJAD
E-MAIL: WASIL-AMJAD@HOTMAIL.COM
HOME PHONE: (042) 8436770
CELL PHONE: 03204666070
HOME ADDRESS: 143-B P.C.H.S DHA LAHORE CANNT, PAKISTAN
PRESENT ADDRESS: ROOM #101, HOSTEL #2, GIK INSTITUTE OF ENGINEERING & TECHNOLOGY, TOPI (SWABI),
N.W.F.P, PAKISTAN
OBJECTIVE
To work in a challenging environment that allows me to apply my technical knowledge
EDUCATION
2002- 2006 GIK Institute of Engineering Sciences and Technology, Topi. Bachelor of
Science in Mechanical Engineering
TECHNICAL SKILLS
Sound knowledge of ProDesktop, ProEngineer, AutoCad, ANSYS, WORKING 2D and CNC programming
Worked on Microsoft Office, Microsoft Visio, C++ Visual Basic, visual C and MATLAB
TECHNICAL SKILLS
• Sound knowledge of ProDesktop, ProEngineer, AutoCAD, ANSYS and CNC programming.
• Programming knowledge of C++ and Visual C.
• Worked on Microsoft Office and Microsoft Visio.
INTERNSHIP EXPERIENCE
• ICI Polyester Fibers (Six Weeks)
Removal of Hot water System from Septet#1 and 2: An individual project assigned to me which had
to be completed in six weeks. I had to develop checklists, procedure and supervise the removal of
hot water system with compliance to ICI safety policy.
• Pakages Limited (Six Weeks)
I was attached to the corrugated department. I was given several projects regarding Flexographic
printing machines.
• Siemens Pakistan (Six Weeks)
I was attached to the team that installed HVAC System in the City Towers Lahore. My task was to
draw drawings of the ducting and also to generate them in AutoCAD. I also designed the placement
of Chillers and Fresh Air Handling Units in the building.
FINAL YEAR PROJECT (Design and Fabrication of Centering Mechanism for MTV)
Designed and fabricated a mechanism that would be installed in a missile transport vehicle (MTV).
A missile transport vehicle carries two missiles. When one missile is removed the other missile is
automatically brought to the center by the mechanism.
SEMESTER PROJECTS
• Designed an HVAC System for a double story house.
• Created 3D model of a surgical tool, calculated stresses, and generated GM codes in Pro-e.
• Design and feasibility study of a CNG Motorbike.
• Design and fabrication of a portable water desalination kit.
• Designed the drive mechanism for escalators and designed its model on Pro-engineer.
• Hardware implementation of an 8-bit Simple As Possible computer (SAP) using Logic Design.
• Cost analysis of the alternatives available to GIKI for its Internet service.
• Development of a software that calculates cricket averages of cricketers using C++.
• Development of a software which allots the most suitable internship to a student in view of his/her
CGPA, preference of city and preference of the type of company.
EXTRA CO-CURRICULAR ACTIVITIES
• Member AIAA (American Institute of Aeronautics and Astronautics).
• Played in the batch cricket team.
• Play Badminton, Football, Squash and Cricket.
• Exploring Computers and Software.
ABDUL ALEEM SHEKHANI
Present Address: Permanent Address:
Room # 108, Hostel #2, GIK Institute M.R. 4/51, Virjee
Street,
Topi 23460, District Swabi, NWFP, Pakistan. Jodia Bazaar, Karachi,
Phone: +92-300--2150121 Sind, Pakistan.
Email: the_abdul_aleem@yahoo.com Phone: +92-21-2439536
OBJECTIVE
To join an organization where I can apply my interpersonal and engineering skills.
EDUCATION
2002-2006 GIKI, Topi. (BS In Mechanical Engineering, Graduating May 2006)
2000-2002 The Lyceum, Karachi. (GCE Advanced levels)
1991-2000 Foundation Public School, Karachi. (GCE Ordinary Levels)
SEMESTER PROJECTS
Network Messenger using Socket Programming in MS Feasibility Report of a milk packaging plant in Topi, Swabi.
Visual C++.
Heating and cooling duct design for a 300 sq. yard 2 Conducted Case study of Honour Killings in Pakistan.
storey house in Karachi.
Study on Compression with intermediate Cooling. Designed a Double Spur Gear Speed Reducer.
Analysis and redesign of the typical Pakistani truck body. Design and fabrication of a fully suspended short wheel
base recumbent high racer.
WORK EXPERIENCE
Summer Internship with Schlumber Oil Field Services(www.slb.com), Drilling and Measurements,
Summer 2005
Designed formal Internship Plan, worked alongside field engineers and tool specialists, studied tool specific manuals,
learnt to interpret LWD and MWD readings, studied advanced material on drilling and planning oil wells.
POSITIONS HELD
• Elected freshman representative to the Student council at The Lyceum.
• Elected as Member of the Student council at The Lyceum.
• President of the snooker wing, GIKI sports Society.
• Event Coordinator for the American Society of Mechanical Engineers, GIKI Chapter.
• Head of Paper Collection Project for Project Topi (A student welfare society for underprivileged children in Topi)
• Captain of the GIKI International parliamentary debates team.
• Executive member of the Literary and Debating Society, GIKI.
• Executive member of the GIKI Sports Society.
• Sub-Editor of the American Institute of Aeronautics & Astronautics, GIKI Chapter, Newsletter.
• Sub-Editor of “GIKI Uncovered”, the local student newspaper.
• First string member of the GIKI All Pakistan parliamentary debates team since freshman year.
• First string member of the GIKI All Pakistan declamation team since freshman year.
• Captain of batch parliamentary debates team since freshman year.
• First string member of batch declamation team since freshman year.
• Anchor for all entertainment night’s held at All Pakistan events in GIKI between spring 2003 and fall 2004.
• Anchor for all Welcome and Farewell ceremonies held Faculty Mechanical Engineering GIKI, fall 2003 onwards.
• Anchor of the Intra GIKI Movie Competition fall 2004.
• Member batch sports teams for cricket (hardball and tape ball) and snooker.
ACHIEVEMENTS
• Stood first in English General Class at The Lyceum 2000-2002.
• Scored 710/800 in the Verbal section and 750/800 in the Mathematics section of the SAT 1 examination (May 2001).
• Lead Actor in The Lyceum’s production of “Darling, I’m home” at the Pak-American Cultural Center in fall 2001.
• Acted in the Human Rights Commission Drama Festival at the FTC auditorium in 1998.
• Member of the GIKI All Pakistan Drama Team 2002-2003 and 2004-2005.
• Member of the winning team at the UET All Pakistan Parliamentary Style Debates 2004.
• Was fourth in the 9th HEC All Pakistan debates for award of the Allama Iqbal Shield (Provincial level).
• Represented GIKI in the All Pakistan Declamation’s held at UET Lahore and GC Lahore in 2003.
• Captain of the winning team at the Open GIKI Parliamentary Style Debates, spring 2003, awarded Best Speaker.
• Captain of the winning team at the Interbatch GIKI Parliamentary Style Debates, fall 2004.
• Awarded the Best Actor prize at the GIKI Drama Competition, fall 2004.
• Member of the winning team at the GIKI Declamation fall 2004 awarded Best Speaker (English humorous).
• Represented GIKI at the National Law School debate in Bangalore in Nov 2004.
• Was Runner up in the Elocution competition at the National Law School debate in Bangalore in November 2004.
MUHAMMAD AJMAL CHOUDHARY
Present Address: Permanent Address:
Room # 99, Hostel # 1, GIK Institute. House. No 4-S-55
Topi 23460, Dist.Swabi, Pakistan. Block.No.16, Sargodha
Tel # (0938) 271858-61 Ext: 2481 Tel # (0483) 728608
Email: ajmal_ch786@yahoo.com Mob: 0300-6047489
Objectives:
To pursue a job in a challenging and competitive environment where I can practically apply and
improve upon the skills acquired from my education.
Education:
GIK Institute of Engineering Sciences & Technology, Pakistan.
BS Mechanical Engineering, Date of Graduation: May, 2006
CGPA: 3.21 Last Semester GPA: 3.44
Air Base Inter College Sargodha, Pakistan.
HSSC Examination, 2002 (A grade)
Army Public School and College Sargodha, Pakistan.
SSC Examination, 2000 (A-1 grade)
Final Year Project
Heat Pipe Optimization for Processor Cooling
Design, Fabrication and Analysis of economical, reliable and more efficient heat pipe in the light of
power dissipation problem of Processors of New Generation.
Semester Projects:
• Developed the Local Area Network Messenger in Visual C++
• Technical Report Writing (Feasibility report for setting up a milk plant in Topi).
• Developed a “Simplest as possible computer” in computer Architecture
• Designed complete shaper machine gear assembly considering all type of analysis.
• Developed a complete design of “Automated Robotic Loader ad Retriever”.
• Designed and fabricated “solar water heater”.
• Designed, fabricated and analyzed“Quick return mechanism” for shaper machine.
• Calculated heating and cooling loads and designed duct for a complete building map.
Internship Experience:
• ICI Polyester Fibers Business : (6 Weeks) Lahore , Pakistan
Projects on “Cost effective solution to rectify the Conveyor problems” and “Design an
alternative system that can be used as loading and retrieving system”
• Packages Industries (Pvt. Ltd.): (4 Weeks) Lahore, Pakistan
Projects on “Recalibration of viscosity control system” and “Quality control Analysis”
• Oil and Gas Development Company(OGDC): (4 Weeks) Dhakkni, Pakistan
Maintenance assignments and project on “Line tracing” of Gas Processing plant.
Professional Skills:
Programming Languages – C, C++, Visual C,
Tools – MS Office, Pro Desktop, Pro Engineer (Wildfire 2.0). Mat-lab.
Awards and Achievements:
• Certificates of merit on the academic basis in all school level classes.
• Second position in SSC Examination in School.
• Third position in HSSC Examination in class.
• Have been on Dean’s roll of honor list for consecutive three semesters.
• Executive Member of American Institute of Aeronautics & Astronautics, GIKI chapter.
• Executive Member of Society for Photo-optical Instrumentation Engineers, GIKI chapter.
Co-Curricular Activities:
• Playing Table Tennis and Cricket.
• Aptitude for learning several languages and have a little interaction with “Arabic”.
• Taking active part in social welfare projects.
AMEER ALI
Present Address: Permanent Address:
Room 80, Hostel 2, GIK Institute Flat no 7A 10th floor,
Topi, District Swabi, Pakistan Block A, Taj Complex Karachi
Tel. No. (0938) 71858-61 Tel. No. 0300-3059238/0235-405315
Email: u2002022@giki.edu.pk Email: ameerali9720@hotmail.com
OBJECTIVE:
To pursue a career in a dynamic and growing organization with a progressive, congenial and learning
work environment where I can explode my technical and management skills
ACADEMIC QUALIFICATION
Ghulam Ishaq Khan Institute of Engineering Sciences & Technology, Swabi
2002-2006 CGPA: 3.05
BS in Mechanical Engineering (Graduation Expected in May ‘06)
Cadet College Sanghar
1997-2002 Grade: A
Higher Secondary School Certificate
WORK EXPERIENCE
Summer 2005 British Petroleum Pakistan, Karachi
(6 weeks) Technical Mini Projects: Water handling At KHG, Decrease the ambient temperature inside the
generator shed, Tangri water Injection system. Data organization (mini projects): P&TS Library
Re-organization and Facilities Opportunities Hopper
Summer 2004 Pakistan Refinery Limited, Karachi
(6 weeks) A short visit of different Engineering sections (Stationary, Rotary Workshop, Inspection &
planning) and deals with the problems related to daily maintenance under the supervision of
respective section supervisors & Engineers
SENIOR DESIGN PROJECT
Study and the design of a working model of gaseous detonation gun for the coating
MAJOR PROJECTS
• Design and Analysis of HVAC system for two Story building
• Designed and Fabricated Omniwheel for first time in Pakistan.
• Design, Analysis and Fabrication of Solar Water Distillation Kit
• Design and fabrication of intelligent automated and manual robots
• Design and analysis of classical Wall clock in PRO/E.
• Brief reports on the study of compression with inter cooling & it effects.
• Design and implementation of SAP Computer
• Developed a LAN chatting software using VC++
TECHNICAL SKILLS
Pro Engineer, Ansys, C/C++, VC++, VB, HTML, MATLAB, MS Project, MS Word, MS Excel, MS PowerPoint
EXTRA CURRICULAR ACTIVITIES
• Represented my college hockey team in All Sindh Cadet Colleges Sports.
• Member of Volleyball team
• Cricket, Football, Horse Riding and Shooting
AWARDS AND ACHIEVEMENTS
• Attended a Short Course on Heat Exchangers by Isotherm Inc. USA;
• Member Organizing Committee for Open House 2004 held in GIKI;
• Designed a website for Cadet College;
• Topped SSC in District Sanghar;
• Awarded as the best cadet in academics in year 2001;
• Awarded as best cadet of computer science in year 1999;
• Represented my college in All Pakistan Education Festival;
Usman Wahid Rao
PERSONAL INFORMATION
Permanent Address: House#277, Gali#34, G-10/1, Islamabad, Pakistan.
Phone No: 092 – 300 – 5525676 (Preferred), 092 – 51 – 2213808
E-mail: usmanrao85@yahoo.com (Preferred), usmanwahid@gmail.com
Date of Birth: March 11th, 1985
OBJECTIVE
To acquire a job in an organization, with a learning and competitive environment, for
enhancing my technical and managerial skills.
EDUCATIONAL HISTORY
2002 – till present Undergraduate student of Mechanical Engineering - 7th semester,
GIK Institute of Engineering Sciences & Technology, Topi, Pakistan.
2000 – 2002 F-Sc Pre-Engineering, Bahria College, Islamabad.
1998 – 2000 Secondary and Primary education, Bahria College, Islamabad.
INTERNSHIPS
DESCON Ltd. Summer 2005
Project included layout of manufacturing facility and Study of HRSG, Bowzers, Heat Exchangers
and Air coolers.
Baker Hughes Summer 2005
Projects included study of mud logging, drilling and coring equipment.
FINAL YEAR PROJECT
Structural Design, 3D Modeling and Fabrication of a CNG Compressor for Home Dispensing Unit
for TESLA industries PVT. LTD.
SEMESTER PROJECTS
Developed a typing tutor in C++.
Database project on Visual C to calculate and store Information of academic record.
Technical report on Design of a Luxury Yacht.
Feasibility report of a milk plant.
Implementation of Simple as Possible computer.
Economic Analysis of setting up an Oil Plant.
Design and Analysis of CAM system of Shaper Machine.
Analysis of a particle element using Mohr’s circle and Solid mechanics techniques.
Design process to develop an automated robotic loading and retrieving system.
Design and fabrication of a portable solar water distiller.
Design of an HVAC unit for a double story office building.
Study of Shell and tube heat exchanger designs in Pakistan.
SKILLS
Languages: English and Urdu (Written and Spoken).
Windows system and network administration.
C++, VC++ and Matlab.
Pro Engineer, Pro desktop, AutoCAD and Rhinoceros.
MS Visio, MS Project, MS Access, MS Office, Ulead Media Studio and Adobe Photoshop.
Technical Report and Letter Writing.
Teamwork, communication and social skills.
Interest and knowledge in marketing, economics and designing of products.
COCURRICULAR ACTIVITIES
Executive member ASHRAE GIKI Chapter.
Member of coordinating team of GIKI Welcome 2004.
Cricket and badminton player.
Remained a member of College council at Bahria College Islamabad.
International student membership of AIAA and ASME.
Usman Imtiaz
PERSONAL INFORMATION
Permanent Address: 50 GG, Defence, Lahore, Pakistan. (Preferred)
Present Address: Room # 91, Hostel 5, GIKI Topi, District Swabi NWFP, Pakistan
Phone No: 092-300-9721622 (Preferred), 092-42 – 5744862
E-mail: usman.imtiaz@gmail.com
Date of Birth: 16th of December, 1984.
OBJECTIVE
Looking for, a good hands on experience in the practical field with a company such as yours
for a job. I expect to achieve invaluable knowledge during my experience with you due to
your impeccable repute and standing.
EDUCATIONAL HISTORY
2002 – till present Undergraduate student of Mechanical Engineering - 8th semester, (CGPA = 3.04/4)
GIK Institute of Engineering Sciences & Technology, Topi, Pakistan.
2000 – 2002 F-Sc Pre-Engineering, Adamjee Government Science College, Karachi.
2000 – 2002 Secondary education, Beacon House System, Steel town branch, Karachi.
INTERNSHIP
Engro Chemicals Pvt. Ltd. Summer 2005 (6 weeks)
Maintenance of Heat exchangers, Pumps, Turbines, Compressors, Cooling towers and valves.
Tetra Pak Summer 2005 (7 weeks)
To study the production process, reduce non-conformities and quality management for increased production.
FINAL YEAR PROJECT
Structural Design, 3D Modeling and fabrication of a CNG Compressor for Home Dispensing Unit for TESLA
industries PVT. LTD.
SEMESTER PROJECTS
Developed a typing tutor in C++.
Database project on Visual C to calculate and store Information of academic record.
Feasibility report of a milk plant.
Implementation of Simple as Possible computer.
Economic Analysis of setting up an Oil Plant.
Design and Analysis of CAM system of Shaper Machine.
Analysis of a particle element using Mohr’s circle and Solid mechanics techniques.
Design process to develop an automated robotic loading and retrieving system.
Design of HVAC plant for a two story building.
Study of Heat Exchanger’s manufacturing and maintenance.
SKILLS
Languages: English and Urdu (Written and Spoken).
Windows system administration, network administration.
C++, VC++ and Matlab.
Pro Engineer, Pro desktop, ANSYS and AutoCAD .
MS Visio, MS Project, MS Access, MS Office, 3D studio Max and Adobe Photoshop.
I have designed animations on 3D studio max.
Technical Report and Letter Writing.
Team work, communication and social skills.
COCURRICULAR ACTIVITIES
OBJECTIVE
To pursue a challenging and illustrious career in a competitive environment where I can practically apply and
improve upon the technical, analytical and managerial skills acquired during my education to the company's
benefit and my own satisfaction
Ghulam Ishaq Khan Institute of Engineering Sciences & Technology, Topi, Pakistan
ACADEMICS
Won Second prize in Advance Level ProEngineer wildfire, Intra GIKI Design Competition 2005
Directed and Produced a Movie, Nominated for best movie in Intra GIKI Movie Competition
Won First prize in GIKI Aircraft modeling Competition
Won First prize in “Science Marathon 2005” held in GIKI
Activities
Head of publicity department, American Institute of Aeronautical and Astronomy (AIAA) GIKI Chapter
Member of Badminton and Football team in GIKI
Squash, Snooker, Football, Badminton, Swimming, Novels, Music
GHULAM ABBAS ASHIQ
DATE OF BIRTH: OCT 16 1984 RAWALPINDI PAKISTAN.
PRESENT ADDRESS: R # 14, H # 3, G.I.K. INSTT. OF ENGG. SCIENCES, TOPI, SAWABI, PAKISTAN
PERMANENT ADDRESS: H# 132 KASHMIR ROAD, SADDAR RAWALPINDI, PAKISTAN.
VOICE: +92 51 5563560, MOBILE: +92 51 300 5009890
EMAIL: abbas_gap@hotmail.com
OBJECTIVE
An opportunity in a competitive environment of your prestigious organization and to ameliorate my management and technical skills
while benefiting your organization.
QUALIFICATIONS
• 2002-Present - GIK Institute of Engineering Sciences and Technology, Topi
Bachelors of Mechanical Engineering CGPA = 2.56 (7 Semesters)
• 2000-2002 – Roots School International, Rawalpindi
A-Levels in pre engineering obtained 2 ‘A’s 1 ‘B’.
SEMESTER PROJECTS
• Design & Fabrication of a ‘Portable Solar Water Purifier’
• Design, Fabrication and Analysis of ‘Offset Slider Crank Mechanism’
• Design of a ‘Tennis Ball Machine’
• Design of ‘Four Gear Speed Reducer’
• Research and Analysis of ‘Turbines for Low Head’
• Detail study of ‘Compressive and tensile stresses in Concrete Wall’
• Design And Fabrication of a work part using the CNC Machine
• Implementation of a ‘Graphics Editor in C++’
• Implementation of ‘Grade Point Average Calculator in Visual C++’
• Implementation of a ‘SAP Computer’
PROFESSIONAL EXPERIENCE
June 2005-July 2005 PACKAGES LTD. LAHORE.
Worked as an intern in the Rubber Department
• Worked on maintenance and repair scheduling of machines.
• Worked on design assembly of a shot blasting machine
• Worked with the engineer installing a cooling fan in an Autoclave.
EXTRA-CURRICULAR ACTIVITIES
• Executive Member of GIKI Sports Society (GSS)
• Executive Member of American Society of Mechanical Engineers (ASME)
• Participated in the PRO E, ANSYS, FLUID DYNAMICS, AUTOMOBILES workshops
• Organized various activities during the Welcome Party in September 2004
• Participated in Intra GIKI Drama Competition
• Volunteered two times in ACM as an organizer for All Pakistan Software competition (Soft Com) 2003& 2004
• Volunteered in LDS as an Organizer for All Pak Parliamentary Style Debate Competition
• Member Of GIKI Basketball team
• Taught Physics and Mathematics to A-Levels Students at High Hopes Academy, Rawalpindi
ACHIEVEMENTS
• Captain of Batch Basketball and Cricket team at GIKI
• Was the Head Boy of Roots School for 2000-2002
• Stood 4th In ‘A-Levels Class
• Awarded Best athlete of the year 2001
• Organized the All Pakistan Peace Festival, Rawalpindi in February 2001 held in Blue Lagoon
• Organized Sports fixtures in Roots School
COMPUTER SKILLS
PRO-Engineering (Wild-Fire/i2), ANSYS 7.0, Auto-Cad, Visual Basic 6.0, C++
MS Excel/Words, Windows XP/2000/98/95, DOS, Flash 5.0
Junaid Rauf Burki
PERSONAL INFORMATION
Permanent Address: House # 01, Block 1-A, Street # 05. I 8/1, Islamabad, Pakistan.
Phone No: +92 – 300 – 8361235, +92 – 51 – 9290007.
E-mail: junaidburki@hotmail.com , junaidburki@gmail.com
OBJECTIVE
To groom my technical, managerial and interpersonal abilities by working in a professional and challenging environment of
designing and manufacturing that realizes my complete potential and requires both innovative development and quality
management.
EDUCATIONAL HISTORY
2002 - 2006 BS in Mechanical Engineering.
Ghulam Ishaq Khan Institute of Engineering Sciences & Technology, Topi
2000 – 2002 FSc Pre-Engineering
I.M.C.B F 8/4, Islamabad Grade: A
1998 – 2000 Matriculation
I.M.C.B F 8/4, Islamabad Grade: A
MAJORS & SPECIALIZATION
• Computer aided designing and manufacturing
• Modern control systems.
• Manufacturing technologies.
• Design of Machine Element.
• Fluid mechanics.
EXPERIENCE
Pakistan tobacco company AKF June –July 2005
Worked on oil storage and transportation for the EHS department. Developed plans for changing machine layout on SMD flour
to decrease time loss and increases profitability. Also worked on ISO documentation.
OGDCL June-July 2004
Learned the basics of oil wells drilling in OGTI department. Visited DAKNI oil well for field experience
FINAL YEAR PROECT
Design selection, analysis and fabrication of simple hanging glider:
PROFESSIONAL SKILLS
• Presentation Skills: MS Power Point, Macromedia Flash, Macromedia Director.
• Programming Languages: C, C++, Visual C.
• Technical Report and Letter Writing: MS Word, Excel.
• Operating Systems: Linux, MS Windows 9x, 2000, XP.
• Management skills: MS Project.
• Tools and Technologies: ProE wildfire, Pro Mechanica, Dream Weaver, fluent, AutoCAD, G&M codes
SEMESTER PROJECTS
• CAD/CAM. assembled, and analyzed a mechanism using Pro-Engineer Wild Fire and Pro Mechanica
• Design of Machine elements. Designed a speed reducer using combination of gears.
• Mechanical engineering design. Design and fabrication of an intelligent water heater
• Heat Transfer. Design and fabrication of a water purifier which is totally operated by Solar Energy
• Theory of machines. Designing and Analysis of a gear train using Pro-Engineer
• Electronics. Study and implementation of home security system
• Feasibility reports. Fiscal analysis of the establishment of a Faculty of Petroleum Engineering at GIK Institute. .
OBJECTIVE
An energetic individual pursuing a job in a company that offers challenging environment that will effectively utilize
my technical, communication and leadership skills
EDUCATION
WORK EXPERIENCE
`
Schlumberger, Well Completion and Productivity Islamabad, Summer Intern 2005
• Developed on hand experience of preventive maintenance of Oil & Gas production equipment
• Helped in cutting down company expenditures by working under challenging conditions to meet client
demands
ICI Polyester Fibres Sheikhupura, Summer Intern 2004
• Designed and implemented a training manual for the work force in accordance with SH&E policy
• Designed a system of pulleys and belts that replaced PIV gears cutting down the maintenance cost
Packages Limited Lahore, Summer Intern 2003
• Analyzed different machine parts using design and simulation tool Auto CAD
• Supervised routine maintenance jobs of HVAC system of plant`
FINAL YEAR PROJECT
Design and fabrication of Centering Mechanism for a missile transport vehicle (MTV).
A year long project aimed at solving the imbalance problems faced in MTV while transporting missiles
SEMESTER PROJECTS
SKILLS
• Managerial skills: Good presentation and interpersonal skills and proved to be a good team player
• Management Electives: Operations Management, Industrial Management and Project Management
• Engineering Software: Pro Engineer Wildfire, Ansys 8.0, AutoCAD
• Teaching Skills: Conducted “Engineering Design” lab as Teaching Associate
• Computational Skills: Windows 2000 NT/XP, MS Office, MS Visio, C++ and Visual C++
EXTRACURRICULAR ACHIEVEMENTS
• Vice president American Institute of Aeronautics and Astronautics (AIAA), GIKI Chapter
• Executive Member American Society of Mechanical Engineers (ASME), GIKI Chapter
• Served as Director Events for Society for Promotion of Higher Education in Pakistan (SOPHEP)
• Currently coordinating “1st National Design, Build and Fly Contest 2006” organized by HEC
CURRENT ADDRESS:
ROOM 60 HOSTEL 5,
Taimoor Arif PERMANENT
ADDRESS:
GIK INSTITUTE R-75 GULSHAN
TOPI, SWABI 23640 BUNGLOWS
MOB. 0300-8961446 BLOCK 19
EMAIL: GULISTAN-E-JAUHAR
Objectives
TAIMOOR.ARIF@GMAIL KARACHI (75290) ,
.COM PAKISTAN
PHONE 021-4619874
Pursue a career in a successful organization with a professional and demanding environment to enhance my
technical and managerial skills.
Education
2002 – – GIK Institute of Engineering Sciences Pursuing BS in Mechanical Engineering
Present and Technology Topi, Swabi NWFP CGPA: 2.42 ; Expected graduation: May 2006
2000 – 2002 – Saint Patrick’s High School, Karachi Advanced Level (Cambridge)
1A, 2B, 1C
Up to 2000 – The City School, Karachi Ordinary Level (Cambridge)
4As, 2Bs
Experience
• Roche Pharmaceuticals
– Interned in the utilities and pharma department and learnt the pharmaceutical
Pakistan Limited (18-
aspect of engineering including emphasis on safety and quality maintenance.
Jul-05 till 11-Aug-05)
• Engro Vopak Terminal – Worked in the maintenance department as an intern where I initiated the
Limited (01-Jun-05 till “Risk-based Inspection” (RBI) technique for Risk management of the facility’s
15-Jul-05) major piping and equipment.
Semester Projects
• Final year project Design and fabrication of a Cold Gas Dynamic Spray system.
• Refrigeration and Air Heating load and cooling load calculation with ventilation design of a
Conditioning residential building.
• Mechanical Engineering Design of a Permanent Magnet Motor, including surveys, ‘Product Design
Design Specifications’ and market potential estimation.
• Heat Transfer Design and fabrication of a portable solar water purification kit.
• Design of Machine Worked on the Design, safety factors and simple force analyses of the Chain-
Elements Sprocket mechanism of a variable speed bicycle.
• Computer Architecture Implementation of Simple As Possible (SAP) computer.
Computing Skills
• Modeling and o PRO/Engineer Wildfire (Part modeling, detailed drawing,
Simulation assembly, mechanisms, analysis and manufacturing)
o SolidWorks 2000
o Fluent
• Application Software o MS Office
o Lotus Suite
o Macromedia Flash
Activities
• Vice President and founding member of ASHRAE GIKI chapter.
• Part of the Heat Exchanger Workshop 2006 organizing team.
• Participated in a seminar on Environmental Management Systems ISO 14001:2004 hosted by
Moody International (PVT.) Ltd. On 30th July 2005.
• Completed basic level summer course for learning French in Alliance Francaise, Karachi.
• Participated in A.S.M.E. intra GIKI PRO/Engineer design competition.
• Worked to organize various workshops and events under the banner of A.S.M.E. GIKI chapter.
• Assisted the instructor in conducting PRO/Engineer tutorial workshops.
• Treasurer of A.S.M.E. GIKI chapter.
• Worked as a Volunteer in NetroniX (GIKI networking society) for upgrade and yearly maintenance
of the entire hostel side network.
USMAN AHMED MIRZA
Current Address: Permanent Address:
Room #49, Hostel 2, House 740, Street No. 83,
GIK Institute, Sector I-8/4.
Topi 23460, Swabi, Islamabad.
NWFP, Pakistan.
Ph: 92-51-4449138
Cell: 0300-5399042 Cell: 0300-5399042
e-mail: usmanmirza26@hotmail.com Date of Birth: 26th June 1983 e-mail: usmanmirza26@hotmail.com
OBJECTIVE
Seeking a position as a mechanical engineer in a private sector organization where my talents can be utilized in an
effective way and I can nurture my skills.
EDUCATION
2002-2006 B.Sc Mechanical Engineering from Ghulam Ishaq Khan Institute CGPA: 2.67 (Semester-7)
of Engineering Sciences & Technology, Topi
SENIOR YEAR OPTIMIZING WASTE MANAGEMENT AT PAKISTAN TOBACCO COMPANY, JHELUM FACTORY: An industrial
PROJECT project involving optimizing effluent & solid waste treatment and introducing clean production options at Jhelum Factory
Programming Tools:
• Visual C++
General Packages:
• Microsoft Word
• Microsoft Power Point
• Microsoft Excel
OBJECTIVE
To work in a reputable engineering company, with an environment in which I can apply the knowledge gained as a
student effectively.
EDUCATION
EXPERIENCE
Summer 2005 Internee at Deutsche Babcock Borsig Power, Abu Dhabi UAE 6 weeks
• Assisted in overhaul of 40MW Steam turbine rotor
• Machining and maintenance of gas turbine components
• Hands on experience in Arc Plasma Powder Coatings
Summer 2004 Internee at Al - Corniche Hospital, Abu Dhabi UAE. (Eng. Department) 2 weeks
• Trained on Boiler house services.
• Carried out PPM scheduled tests.
• Maintenance of Hydraulic Pumps.
• Managed Quality control of Autoclaves, boilers and pumps.
RECENT PROJECTS
• Final Year project : Design and fabrication of Cold Gas Dynamic Spray System (in progress)
• Heat / Cooling load calculations and Duct design of a residential building.
• Various Total Quality Management projects (QFD, SPC, ISO standards)
• Design of Portable water purification kit.
• Design of Hydraulic Dredging System for de-silting of river beds.
• Design of chain drives and sprockets for a 21 speed mountain bike.
• Economic analysis of the Boeing 777 fleet purchased by PIA.
• Presentation on the stress analysis of beams under different loading conditions.
• Conducted tutorials on Pro-Engineer Wildfire and MatLab.
• Feasibility report on the construction of a milk plant in the rural areas of Pakistan.
• Implementation of Student information system using C++ language.
EXTRA CURRICULAR ACTIVITIES
Objective
To gain work experience in a dynamic atmosphere, where I can apply my technical, managerial, and interpersonal
skills with quality teamwork, honesty and commitment.
Education
Ghulam Ishaq Khan Institute, Topi B.S. in Mechanical Engineering (2006)
Cadet College Hasan Abdal, Hasan Abdal F.Sc: Grade: B
Cadet College Hasan Abdal, Hasan Abdal GCE ’O Levels: Physics (A), Chemistry (B), Urdu (B)
Experience
Six-week summer internship at Packages Limited Lahore; during my internship, I worked primarily in their
Coating Department on a project called Paper Curling. It had been affecting the overall efficiency of their
department by decreasing its paper waste for some years. In the detailed technical report, I highlighted alternative
possible ways of reducing their annual costs, and controlling Paper waste.
Semester Projects
• Detailed design and analysis of a model of an air conditioning unit. GIKI, 2005
• Design and fabrication of a four bar link mechanism. GIKI, 2004
• Experimental analysis of heat transfer in 3D projects. GIKI, 2004
• Implementation of SAP-I. GIKI, 2003
• A detailed feasibility study of installing a Mobilink tower outside GIKI campus. GIKI, 2002
Technical Skills
• Pro-Engineer Wildfire, CAD/CAM
• Fluent, CoolPack 1.46
• Well versed in Technical Report Writing, Feasibility reports, and Engineering Drawing
Objective
My primary objective is to join an organization which offers an excellent career development
program where I can utilize my potential efficiently and provides me with the opportunity to apply
and ameliorate my technical, managerial and interpersonal skills.
Education
• GIK Institute of Engineering Sciences & Technology, Topi, Pakistan
BS Mechanical Engineering (2002-2006) Junior Year GPA: 3.38/4.00
Cumulative GPA : 2.83/4.00
• Islamabad Model College for Boys F7/3 Islamabad
Higher Secondary School Certificate (2000-2002) Grade A
OBJECTIVE Looking for a job as a trainee engineer, having huge potential for growth and progress, achievable only by
the application of my engineering talent and managerial skills.
EDUCATION
2002 – Present GIK Institute of Engineering Sciences and Technology Topi, Pakistan
BS in Mechanical Engineering CGPA 2.76/4.0 Expected Graduation May 2006
SKILLS
Microsoft Office (Word, Power Point, Excel), Pro/E Wildfire 2, C++, Visual Basic
Good presentation, communication and team playing abilities.
AWARDS/ACHIEVEMENTS
Captain of GIKI hardball cricket team.
Captain of Mechanical Football Team.
Won man of the match for cricket at LUMS-GIKI Sports Fixture 2005.
Member of the GIKI football team.
Won the Golden boot award in the Fall 05 GIKI Football League.
Member of GIKI Football Society and part of the organizing committee.
Secured first position in O-levels in my school.
Member of the team that won the Intra GIKI tape ball Cricket Tournament 2004-05.
Vice captained the side which won Inter faculty hardball Cricket Tournament 2003-04.
RAGHIB SALMAN
C/O Dr. Zahir Rabbani C/O Alshams medicos
P.O. BOX# 18000, D.H.Q.Hospital opp: D.H.Q. Hospital
Timergara, Distt. Dir (L), N.W.F.P. Pakistan. Timergara, Distt. Dir (L), N.W.F.P.
Phone: +92-945-825457 , +923005824544 Pakistan.
Email: janan_me@yahoo.com Cell: +92 301 8533404
OBJECTIVE
Looking for a dynamic environment where I can transform my knowledge into valuable work
experience and enhance my technical and managerial skills.
EDUCATION
GIK Institute of Engineering Sciences and Technology, Topi-23460, Pakistan
Bachelors of Science in Mechanical Engineering, (Graduation expected in May 2006)
Peshawar Public School and College, Peshawar
F.Sc (2001) 77.18 %
Wisdom House Public School, Timergara Distt. Dir (L)
SSC (1999) 77.29 %
EXPERIENCE
Worked as internee at Oil and Gas Development Corporation Ltd (OGDCL), July/Aug 2005
(8 weeks)
• Attended several workshops about latest field machinery
• Attended training sessions about working with different industrial plants
Lab Assistant, GIK Institute, Topi, Pakistan, January 2005
• Worked as a lab assistant for the engineering drawing course
Help out students with drawing techniques
Participated in Robocon 2005
• Worked as a Robocon team member
• Analysis of manufacturing work
Worked as internee at Heavy Mechanical Complex (HMC) Taxilla, Jun/Jul 2004 (4 weeks)
• Study and observe different manufacturing processes
• Study assembly drawings
OBJECTIVE:
To pursue a career in a well reputed organization where I can utilize my knowledge to its peak and quench my
thirst for knowledge and experience.
EDUCATION:
Year Qualification Institute GPA/Grade
2002-2006 BS in Mechanical Engineering GIK Institute of Engineering CGPA:2.83
Sciences & Technology, Topi
2000-2002 Higher Secondary School P.A.F Inter College, E-9 Islamabad Grade: A
Certificate
1998-2000 Secondary School Certificate P.A.F Inter College, E-9 Islamabad Grade: A
EXPERIENCE:
Pakistan Petroleum Limited (6 weeks internship)
Sui Field Gas Compression Station (SFGCS) (3 weeks)
I was attached to the team that did major overhaul of the turbo-compressor at Sui Field Gas Compression
Station. My task was to submit a report on the major overhaul of the turbo-compressor.
Purification Plant (3 Weeks)
My assignment was to draw the process and instrumentation diagrams of the instrument air for the plant.
I also had to submit a report on purification process of natural gas and demineralization of water used in
boilers.
Oil & Gas Development Corporation Limited (6 Weeks internship)
I was attached with the team that did the drilling of well no.8 at Dakhni Oil Field. My task was to study
the process of drilling and submit a report on the drilling process.
SENIOR YEAR DESIGN PROJECT:
Design and Fabrication of Centering Mechanism for Missile Transporting Vehicle
Designed and fabricated a mechanism that would be installed in a missile transport vehicle. A missile
transport vehicle carries two missiles. When one missile is removed the other missile is automatically
brought to the center by the mechanism.
SEMESTER PROJECTS:
Design HVAC System for a double story house.
Design and feasibility study of a CNG Motorbike.
Design and fabrication of a solar water heater.
Designed the drive mechanism for escalators and designed its model on Pro-engineer.
Hardware implementation of Simple as Possible computer (SAP) using Logic Design.
Cost analysis of the alternatives available to GIKI for its hostel mess and cafeteria.
Development of software which allots rooms to customers of a hotel and also keeps record of the rooms
using C++.
TECHNICAL SKILLS:
Software: Pro Engineer, ANSYS, AutoCAD.
Programming in C++, MS Excel.
Well versed in using MS Office, Microsoft Visio.
CO-CURRICULAR ACTIVITIES & INTERESTS:
Played for the batch cricket team.
Member of American Institute of Astronautics and Avionics (AIAA) GIKI chapter
Attended the PAPG-SPE Annual Technical Conference