ME
NATIONAL DRAWWORKS
-— .
ARMCO Armco Steel Corporation
V Machinery & Equipment Division
TORRANCE PLANT, TORRANCE, CALIFORNIA 3051656 3
ivtRopuction
NATIONAL Drawworks are manufactured at the Torrance, California Plant of the Machinery and
Equipment Division, ARMCO STEEL CORPORATION. A serial number is assigned to each drawworks
and any inquiries concerning the drawworks in your possession must include reference to this serial
number.
‘The serial number is stamped on the drawworks identification plate; on the frame near the spinning
cathead, and again on the corner of the skid at the drillers end.
A separate illustrated parts list is provided for ordering replacement parts. It contains any modifica-
tions which may have been incorporated after this manual was written,
ARMCO STEEL CORPORATION reserves the right to change specifications of subsequent production
units of this equipment without incurring liability for such change on previously built equipment.
Copies of this manual are furnished with each new drawworks at time of shipment on a “no charge”
basis. Additional or replacement copies may be purchased for $15.00 each.
TABLE OF CONTENTS
Page
INSTALLATION concn — ne _ 8 thru 7
LUBRICATION on centmnnnes 9 thy 1B
CONTROLS AND AIR SYSTEM ... ~ on 15 thru 80
MAINTENANCE coe 81 thru 50
SPECIFICATIONS ee coe BE
PRESERVATION OF MACHINERY ~~. on coon 58 thru 57
RECOMMENDED SPARES - — 59 thru 61
DRAWWORKS,
55 DRAWWORKS, oe --. 63 thru 73
80-B/UE DRAWWORKS ___ He 75 thru 89
110-M/UE DRAWWORKS «0 ar 91 thru 105
1320-M/UE DRAWWORKS ee 107 thru 122
es 123 thru 138
1625-M/DE DRAWWORKSINSTALLATION
Page
Factory Testing . 5
‘Material Check ....... 5
Foundation Drawing . 5
Assembly and Alignment — Drawworks .. os ~ 5
Alignment — Rotary Table . 6
Assembly and Alignment— Rig Drive .. rn)
Wireline Spooling ....
Lubrication ...... 6
First Running —.. 1
General Inspection _. conn 7