Parts Specialist
PRODUCTS PARTS LIST
Inventory
Engineering Department
and Manufacturing Facility
To help you save time and money
VERSION: 26072010
GENERAL INFORMATIONS
MISSION
" UM’s mission is to become partners with its clients for their development, improvement
and innovation. With a background of several decades in mechanical design and
engineering, UM designs, develops and makes innovative high quality products by
adapting its services to answer in an efficient manner its clients expectations. By its
improvement spirit and its willingness to offer their partners complete solutions allowing
them to increase their efficiency and their competitiveness, UM will make the
difference."
SHIPPING
If you would like to forward all samples or reconditioned product:
Rev. : VDF26072010 II
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
TABLE CONTENT
1. Stretch Blow Molding – Part List .................................................................................2
KRONES*.........................................................................................................................3
SIDEL* Serie 1 .................................................................................................................8
SIDEL* Serie 2 ...............................................................................................................10
SIDEL* Serie 2+.............................................................................................................16
SIDEL* Dual Cavity.......................................................................................................18
SIDEL* Universal...........................................................................................................19
KHS* (SIG*, Krupp*)3rd Generation Blomax ...............................................................21
KHS* (SIG*, Krupp*)2nd Generation Blomax...............................................................29
SIPA* ECS FX ...............................................................................................................43
SIPA* SFR......................................................................................................................44
Tooling...............................................................................................................................62
Custom design...................................................................................................................63
Index ..................................................................................................................................64
Rev. : VDF21012010 2
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
KRONES*
MACHINE : KRONES
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
Finger Gripper
ROTARY CAPPER
(available for Wheel
different preform)
0-901-896-352-63 ---
UMKN-0901896352-
0099-002-01-04
63
EXTRUSION BLOW
Shaft – Chain link Spindle cooling shield
MOLDING
1-800-20-488-8
--- 1-901-12-368-5
0-900-80-246-8
Available in multiple
0099-002-01-01
shapes and sizes
FILLER
--- ---
0099-002-01-00 0099-002-01-02
INJECTION MOLDING
Wheel shaft Bushing
--- ---
0099-002-01-03 0099-002-01-05
AIR COMPRESSOR
--- ---
0099-003-01-00 0099-003-01-01
Rev. : VDF21012010 3
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
MACHINE : KRONES
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
ROTARY CAPPER
Spindle Bearing
Spindle Bearing large
small
--- ---
0099-003-01-02 0099-003-01-03
EXTRUSION BLOW
Spacer Ball support
MOLDING
--- ---
0099-003-01-04 0099-003-01-05
FILLER
--- ---
0099-003-01-06 0099-003-01-07
INJECTION
MOLDING
--- ---
0099-003-01-08 0099-003-01-09
AIR COMPRESSOR
Spring
---
0099-003-01-10
Rev. : VDF21012010 4
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
MACHINE : KRONES
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
ROTARY CAPPER
Spacer Spacer
--- ---
0099-003-01-11 0099-003-01-12
EXTRUSION BLOW
Bushing Spacer
MOLDING
--- ---
0099-003-01-13 0099-003-01-14
FILLER
KR1786334430 0-900-966-245
UMKN-
UMKN-0900966245
KR1786334430
INJECTION
MOLDING
--- ---
0099-004-01-01 0099-004-01-02
AIR COMPRESSOR
--- ---
0099-004-01-03 0099-004-01-04
Rev. : VDF21012010 5
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
MACHINE : KRONES
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
ROTARY CAPPER
Preform holder head
Oring
cap
--- ---
0099-004-01-05 0099-004-01-06
EXTRUSION BLOW
Preform holder head
Oring
body
MOLDING
--- ---
0099-004-01-07 0099-004-01-08
FILLER
--- ---
0099-004-01-09 0099-004-01-10
INJECTION
MOLDING
--- 45907364
0099-004-01-11 UMKN-45907364
AIR COMPRESSOR
5970062 5970063
UMKN-5970062 UMKN-5970063
Rev. : VDF21012010 6
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
MACHINE : KRONES
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
ROTARY CAPPER
Cylinder guide Cylinder guide
48734444 48734558
UMKN-48734444 UMKN-48734558
EXTRUSION BLOW
Oring Oring
MOLDING
6213044 6213047
UMKN-6213044 UMKN-6213047
FILLER
1-780-50-067-0 1-788-33-114-0
UMKN-
UMKN-1788331140
1780500670
Seal
INJECTION
MOLDING
0-950-00-002-2
UMKN-
0950000022
AIR COMPRESSOR
Rev. : VDF21012010 7
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
SIDEL* Serie 1
MACHINE : SIDEL Serie 1
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part # Picture OEM Part #
UM Part # UM Part #
New Compensation
Bar System – Low Replacement
ROTARY CAPPER
Profile (without spring bumper kit
washers and bolts)
--- ---
0002-079-01-34 0002-079-01-41
New Compensation
Bar System Quick
Rubber kit –
EXTRUSION BLOW
change – Low
compensation system
Profile (without
MOLDING
quick change
spring washers and
bolts)
--- ---
0002-079-07-00 0002-079-07-34
FILLER
--- 17263
0002-012-03-00 UMS-17263L or R
INJECTION
Refurbish
MOLDING
quick change
QC: 010655795
99000069227
NQC: 010658006
QC: UMS-655795R
UMS-99000069227
NQC: UMS-658006R
Base Plate -
Improve design : the
AIR COMPRESSOR
Rev. : VDF21012010 8
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part # Picture OEM Part #
UM Part # UM Part #
ROTARY CAPPER
GUPM Locking GUPM
010622922 010622921
UMS-622922 UMS-622921
EXTRUSION BLOW
Locking GUPM GUPM
MOLDING
010621988 010624804
UMS-621988 UMS-624804
FILLER
contruction weakness
010624600 010667017
UMS-624600 UMS-667017
IMPROVE Blow
Shaft - Locking
Nozzle (without o-
GUPM
ring and no clip)
INJECTION
MOLDING
010622920 available in
different preform
UMS-622920 neck size
a hard material in
order to bring the
surface to the
010656316 original dimensions
with a improved
UMS-656316 durability)
Rev. : VDF21012010 9
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
SIDEL* Serie 2
MACHINE : SIDEL Serie 2
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
S2 Exhaust Valve
S2 Blow Valve Assy
Assy repair with
ROTARY CAPPER
repair with MAC Pilot
MAC Pilot
Valve/Plate
Valve/Plate
(type 2628)
(type 2629)
LH 086549/114583 LH 086559/114585
UMS-114583 UMS-114585
EXTRUSION BLOW
Blow & Exhaust Seals rebuild kit for
valve body repair UMS-114583 & UMS-
MOLDING
(type 2628 & 2629) 114585
LH 086549/114583 &
---
LH 086559/114585
UMS-114583 &
0002-001-01-29
UMS-114585
FILLER
(red: exhaust)
blow)
--- ---
0002-001-01-48 0002-001-01-47
INJECTION
MOLDING
valve REBUILD solution
(type 2628 & 2629)
01123429701 ---
UMS-01123429701 0002-001-01-09
AIR COMPRESSOR
01123429701 ---
UMS-01123429701 0002-001-02-34
Rev. : VDF21012010 10
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
S2 Blow/ Preblow /
ROTARY CAPPER
Exhaust Valve Assy
Compensation Cup
repair with MAC Pilot
Valve/Plate
0000087692
0000087399/695 010745938
0000087693
UMS-087692
UMS-087399/695 UMS-745938
UMS-087693
EXTRUSION BLOW
Retainer Plate
HEAT SET
(Improve part - 60 Rc
Compensation
MOLDING
compare than 15 Rc
Bumper
from OEM)
--- 010727970
0002-079-05-13 UMS-727970
FILLER
Rc compare than 15 Rc compare than 15
Rc from OEM) Rc from OEM)
010729281 010694716
UMS-729281 UMS-694716
Retainer Plate
INJECTION
MOLDING
S2 Diffusor (Improve part - 60
dia. 14mm Rc compare than 15
Rc from OEM)
010727460 010723367
UMS-727460 UMS-723367
AIR COMPRESSOR
010746089 &
010742006
010727458
UMS-746089 &
UMS-742006
UMS-727458
Rev. : VDF21012010 11
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
ROTARY CAPPER
SB020 Water Rotary Air Rotary Union
Union Refurbish Refurbish
99000411427
1002131803
(99000016461)
UMS-1002131803 UMS-99000411427
EXTRUSION BLOW
Cylinder Neck
Cylinder Neck height
height Assy
assembly
MOLDING
(improve parts)
Cylinder neck
height Cylinder
(improve part)
FILLER
010747728 010727467
UMS-747728M UMS-727467
INJECTION
MOLDING
(improve part) (improve part)
010745985 010742007
UMS-745985M UMS-742007M
AIR COMPRESSOR
010744524 010744553
UMS-744524M UMS-744553M
Rev. : VDF21012010 12
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
ROTARY CAPPER
End piece
End Piece
(improve part)
010268379 010727457
UMS-268379 UMS-727457
EXTRUSION BLOW
End piece with Set-
End piece
Screw
(improve part)
MOLDING
(improve part)
010746128 010746128SC
UMS-746128M UMS-746128SCM
Ring Washer
(improve part) (improve part)
FILLER
010746710 010727469
UMS-746710M UMS-727469M
INJECTION
MOLDING
short long
N/A N/A
0002-079-01-46 0002-079-01-45
AIR COMPRESSOR
010734326 010725134
UMS-734326 UMS-725134
Rev. : VDF21012010 13
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
ROTARY CAPPER
Finger gripper Finger gripper
Infeed Outfeed
EXTRUSION BLOW
Finger gripper Finger gripper 26mm
26mm Infeed Outfeed
MOLDING
011139915 011139924
UMS-139915 UMS-139924
Finger Finger
FILLER
154127 139296
UMS-154127 UMS-139296
INJECTION
MOLDING
rebuilt Rebuilt
7472800142 ---
UMS-7472800142
AIR COMPRESSOR
Preform Holder
Ejector Assembly
With O-Ring
Available in 153896
multiple shapes and
sizes
UMS-659467 UMS-153896
Rev. : VDF21012010 14
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
New Compensation
ROTARY CAPPER
Bar System – Low Replacement
Profile (without spring bumper kit
washers and bolts)
--- ---
0002-079-01-34 0002-079-01-41
New Compensation
EXTRUSION BLOW
Bar System Quick Rubber kit –
change – Low Profile compensation system
MOLDING
(without spring quick change
washers and bolts)
--- ---
0002-079-07-00 0002-079-07-34
Bell rebuilt
Bell Improvement
Improvement
(Reinforces seat)
(Reinforces seat)
FILLER
75 mm
75 mm
011210601 011210601
010727456 010727456
UMS-210601 UMS-210601R
Bell rebuilt
Bell Improvement
Improvement
INJECTION
MOLDING
(Reinforces seat)
(Reinforces seat)
80 mm
80 mm
010746615 010746615
UMS-746615 UMS-746615R
AIR COMPRESSOR
Rev. : VDF21012010 15
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
SIDEL* Serie 2+
MACHINE : SIDEL Serie 2+
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
ROTARY CAPPER
Blow Valve Assy Recovery Valve
rebuilt Assy rebuilt
011224646 011226565
UMS-224646M UMS-226565M
EXTRUSION BLOW
Pre-blow Valve Exhaust valve Assy
Assy rebuilt rebuilt
MOLDING
011224647 011224648
UMS-224647M UMS-224648M
FILLER
--- ---
0002-001-04-11 0002-001-04-10
INJECTION
MOLDING
(blue: blow/pre-blow) solution
--- ---
0002-001-04-09 0002-001-03-09
AIR COMPRESSOR
--- ---
0002-001-04-12 0002-005-01-23
Rev. : VDF21012010 16
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
ROTARY CAPPER
S2+ Cylinder Valve float
746095 00000138235
UMS-746095 UMS-138235
EXTRUSION BLOW
MOLDING
FILLER
INJECTION
MOLDING
AIR COMPRESSOR
Rev. : VDF21012010 17
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
ROTARY CAPPER
Stretch Rod Clamp parts
Yoke (Improved) with
customer
core return
010647514 010647514
UMS-647514 UMS-647514R
EXTRUSION BLOW
Stretch Rod Clamp
MOLDING
Harden parts Assy with bushings
(Improved)
010682702 10067763101
UMS-682702 UMS-677631
FILLER
plate bottom plate top
010739241 010733113
UMS-739241 UMS-733113
INJECTION
MOLDING
Ejector
010953898
UMS-953898
AIR COMPRESSOR
Rev. : VDF21012010 18
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
SIDEL* Universal
MACHINE : SIDEL Universal
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
ROTARY CAPPER
Stretch rod assy Retainer plate bottom
--- 011286310
0002-005-02-17 UMS-286310
EXTRUSION BLOW
Plunger Retainer plate top
MOLDING
--- 011242949
0002-005-02-18 UMS-242949
FILLER
--- ---
0002-005-02-20 0002-005-02-16
INJECTION
MOLDING
plate
011286573 ---
UMS-286573 0002-005-02-13
AIR COMPRESSOR
010715542 010715527
UMS-715542 UMS-715527
Rev. : VDF21012010 19
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
ROTARY CAPPER
Valve float Valve bushing
00000138235 00000116584
UMS-138235 UMS-116584
EXTRUSION BLOW
Valve piston Valve bushing refurbish
MOLDING
--- 00000116584
0002-001-05-25 UMS-116584R
FILLER
011319435 ---
UMS-319435 0002-001-05-04
INJECTION
MOLDING
011319436 010715528
UMS-319436 UMS-715528
AIR COMPRESSOR
Rev. : VDF21012010 20
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
PISTON REPAIR -
P1, P2 & Exhaust PISTON BRAND
ROTARY CAPPER
1
(repair material tip NEW - P1, P2 &
section (see #1) and Exhaust
change all seals)
50361061 50361061
UMK-50361061R UMK-50361061
EXTRUSION BLOW
Pilot Valve P1 & P2 Pilot Valve Exhaust
Alternative solution Alternative solution
MOLDING
available available
50363507 50363505
UMK-50363507 UMK-50363505
Toothed segment -
Mandrel Support
Locking mechanism
FILLER
Metal only
94099048 94112957
94099262
94137018 UMK-94112957
94135100/7559
94154941
With Magnet
INJECTION
Lip Seal Ring
MOLDING
95340110
95140445/623
95140632
95340166/167 50379550
50370831
Metal only UMK-50379550
UMK-94099048 UMK-50370831
UMK-94099262
UMK-94137018
AIR COMPRESSOR
UMK-94135100/7559
UMK-94154941 Lip Seal Ring
With Magnet
UMK-95340110 50374992
UMK-95140445/623
UMK-95140632
UMK-95340166/167 UMK-50374992
Rev. : VDF21012010 21
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
ROTARY CAPPER
Distance Washer -
(include oring)-
Sealing Cartridge
Sealing Cartridge
94138688 50188136
UMK-94138688 UMK-50188136
EXTRUSION BLOW
Guide Small 12mm Guide Large 12mm -
- Sealing Cartridge Sealing Cartridge
MOLDING
94099167 94129201
UMK-94099167 UMK-94129201
FILLER
94138686 94138687
UMK-94138686 UMK-94138687
INJECTION
MOLDING
Wheel
94075167
Different size and
length available
UMK-94075167
AIR COMPRESSOR
94131041 94134013
UMK-94131041 UMK-94134013
Rev. : VDF21012010 22
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
ROTARY CAPPER
CONTACT PLATE SIDE - MANDREL
DISCHARGER
94131503 94131504
UMK-94131503 UMK-94131504
GUIDE ARM
EXTRUSION BLOW
GUIDE ARM TOP
BOTTOM SIDE -
SIDE - MANDREL
MANDREL
MOLDING
DISCHARGER
DISCHARGER
94131505 94131506
UMK-94131505 UMK-94131506
GUIDE ARM
Guide bushing Large
BOTTOM SIDE -
- Locking
MANDREL
mechanims
FILLER
DISCHARGER
94131507 94129491
UMK-94131507 UMK-94129491
INJECTION
MOLDING
Locking Mechanims Locking Mechanims
94150475 94150473
UMK-94150475 UMK-94150473
AIR COMPRESSOR
94099343 94099358
UMK-94099343 UMK-94099358
Rev. : VDF21012010 23
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
ROTARY CAPPER
Collar bush - Transfer Axle - Transfer arm
arm assy assy
94131064 94099044
UMK-94131064 UMK-94099044
EXTRUSION BLOW
Pin - Stretch rod Holder plate long -
holder Transfer arm 2 & 3
MOLDING
94129897 94099248
UMK-94129897 UMK-94099248
FILLER
94127907 94131330
UMK-94127907 UMK-94131330
Connecting Shaft
Stretch rod holder
INJECTION
MOLDING
Repair & Improve
94129896 94129672
UMK-94129896 UMK-94129672
AIR COMPRESSOR
94129190 94150433
UMK-94129190 UMK-94150433
Rev. : VDF21012010 24
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
ROTARY CAPPER
Bearing Tube - Repair Mandrel base assy
& Improve (G3)
94129697
Available in multiple
shapes and sizes
UMK-94129697
EXTRUSION BLOW
Spacer bush (G3) Mandrel base assy (G3)
MOLDING
94129654 95180336
UMK-94129654 UMK-95180336
Mandrel - Chain
Mandrel Base
Wheel (Sprocket)
FILLER
94099469 94099279
UMK-94099469 UMK-94099279
Mandrel - Guide
Mandrel - Bumper
INJECTION
MOLDING
Bush Large 12mm
94129408 94112313
UMK-94129408 UMK-94112313
AIR COMPRESSOR
Oring nitrile
Grooved ball bearing
19.5mm x 1mm
(94131803)
section
5014133 50186403
UMK-5014133 UMK-50186403
Rev. : VDF21012010 25
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
Mandrel insert
Mandrel Insert (Head)
ROTARY CAPPER
(with 4 steps)
- Product depending
- Product depending
parts
parts
EXTRUSION BLOW
Transport mandrel Transport mandrel assy
MOLDING
assy (PH)
(available in
(available in multiple
multiple shapes
shapes and sizes)
and sizes)
FILLER
94150895 94152467
UMK-94150895 UMK-94152467
INJECTION
MOLDING
Spacer bush Spacer bush (PH)
94151722 94152498
UMK-94151722 UMK-94152498
AIR COMPRESSOR
95180519 95180539
UMK-95180519 UMK-95180539
Rev. : VDF21012010 26
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
ROTARY CAPPER
Thrust washer Thrust ring (PH)
94150897 ---
UMK-94150897 0001-015-03-12
EXTRUSION BLOW
Bumper
Inner ring
(UMK-94152780)
MOLDING
94150896 50361005
UMK-94150896 UMK-50361005
Grooved ball
bearing Bolt
(94131803)
FILLER
50186403 94136308
UMK-50186403 UMK-94136308
INJECTION
MOLDING
94150898 50368847
UMK-94150898 UMK-50368847
AIR COMPRESSOR
Cup spring
50373907
UMK-50373907
Rev. : VDF21012010 27
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
ROTARY CAPPER
12mm 12mm
(available in 10 and available in 10 and
14mm) 14mm)
UMK-94129651 UMK-94112313
EXTRUSION BLOW
Mandrel Insert Oring
MOLDING
(available in
multiple sizes)
FILLER
INJECTION
MOLDING
AIR COMPRESSOR
Rev. : VDF21012010 28
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
ROTARY CAPPER
RECONDITION
1 P2, (repair material tip
section (see #1) and
(or Pancake)
change all seals)
94086224 50211104R
UMK-94086224R UMK-50211104R
EXTRUSION BLOW
VALVE REPAIR - P1 (with gray transport
, P2, Exhaust & box) - P1, P2, Exhaust
MOLDING
Connecting (repair the and Connecting
two sliding piston
surfaces and bring 50211104
back to the original
dimension with a
UMK-50211104
much harder material)
FILLER
available available
50279201 50256539
UMK-50279201 UMK-50256539
INJECTION
MOLDING
Insert (Pancake) Insert (Pancake)
50191939 94077054
UMK-50191939 UMK-94077054
AIR COMPRESSOR
94083225 94083801
UMK-94083225 UMK-94083801
Rev. : VDF21012010 29
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
ROTARY CAPPER
Plastic Guides- Plastic Guides-
Transfer wheel Transfer wheel
94083224 94083219
UMK-94083224 UMK-94083219
EXTRUSION BLOW
Plastic Guides- Plastic Guides- Transfer
Transfer wheel wheel
MOLDING
94083263 94083237
UMK-94083263 UMK-94083237
FILLER
94083252 94087145
UMK-94083252 UMK-94087145
INJECTION
MOLDING
Transfer wheel Transfer wheel
94087140 94087141
UMK-94087140 UMK-94087141
AIR COMPRESSOR
94087137 94087127
UMK-94087137 UMK-94087127
Rev. : VDF21012010 30
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
ROTARY CAPPER
Plastic Guides - Plastic Guides -
Transfer wheel Transfer wheel
94087135 94087114
UMK-94087135 UMK-94087114
EXTRUSION BLOW
Bearing Wheel Gripper Left
MOLDING
94075167 94090898
UMK-94075167 UMK-94090898
Locking Mechanism
Pin (for arms Gripper Right
locking mechanism)
FILLER
94075038 94090899
UMK-94075038 UMK-94090899
INJECTION
MOLDING
opening / closing opening / closing
mechanism) mechanism)
94075042 94075041
UMK-94075042 UMK-94075041
Guide Bushing –
AIR COMPRESSOR
94075039 94075123
UMK-94075039 UMK-94075123
Rev. : VDF21012010 31
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
ROTARY CAPPER
opening / closing opening / closing
mechanism) mechanism)
94077149 94077079
UMK-94077149 UMK-94077079
EXTRUSION BLOW
Guide Bush (for arms
Rack (for arms opening
opening / closing
/ closing mechanism)
MOLDING
mechanism)
94077135 94075102
UMK-94077135 UMK-94075102
FILLER
94075043 50192133
UMK-94075043 UMK-50192133
INJECTION
MOLDING
Station
94077080 94077081
UMK-94077080 UMK-94077081
AIR COMPRESSOR
Trust Bearing
Stopper - Blow
Support - Blow
Station
Station
94089640 94089648
UMK-94089640 UMK-94089648
Rev. : VDF21012010 32
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
ROTARY CAPPER
Stabilizator finger Connecting Shaft -
28mm - Blow Station Blow Station
94086011 94077152
UMK-94086011 UMK-94077152
EXTRUSION BLOW
Tightening Pin (for
Axial needle bearing -
arms opening / closing
Blow station
MOLDING
mechanism)
Picture not available
50182896 50174852
UMK-50182896 UMK-50174852
FILLER
50209164 94075101
UMK-50209164 UMK-94075101
INJECTION
MOLDING
Base Lifting Device Base Lifting Device
UMK-50176251 UMK-50184102
Stretch Rod
AIR COMPRESSOR
Cylinder - REPAIR
Stretch Rod
INTERNAL
SURFACE
50195819
Different size and
length available
UMK-50195819
Rev. : VDF21012010 33
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
Mandrel Insert
ROTARY CAPPER
Transport Mandrel (Head) - Product
depending parts
EXTRUSION BLOW
Mandrel Guide Bushing
14mm
Mandrel Body
MOLDING
(12 and 15mm available
also)
94039007 (14mm)
94039498
94043588 (12mm)
UMK-94039007 (14mm)
UMK-94039498 UMK-94043588 (12mm)
Mandrel Guide
Bushing 14mm
Sproket
(12 and 15mm
FILLER
available also)
94041150(14mm)
94039488
94043339(12mm)
UMK-94041150(14mm)
UMK-94039488
UMK-94043339(12mm)
INJECTION
MOLDING
Spacer Bush Locking Screw
94039487 94056011
UMK-94039487 UMK-94056011
AIR COMPRESSOR
50191962, 50197793
94077039
& 50186171
UMK-50191962,
UMK-94077039 50197793 & 50186171
Rev. : VDF21012010 34
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
Connecting Piston
ROTARY CAPPER
Piston - Connecting Assy BRAND NEW
Piston OR
REBUILD
95140264
94086552
UMK-94086552
UMK-95140264
EXTRUSION BLOW
Fork - Connecting Holder - Connecting
Piston Piston
MOLDING
94077041 94086553
UMK-94077041 UMK-94086553
FILLER
50192074 94077040
UMK-50192074 UMK-94077040
Roller - Connecting
Roller pin
INJECTION
MOLDING
piston
94077050 50189618
UMK-94077050 UMK-50189618
AIR COMPRESSOR
50189618 50192043
UMK-50189618 UMK-50192043
Rev. : VDF21012010 35
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
ROTARY CAPPER
Spring Articulated lever
94077134 94075049
UMK-94077134 UMK-94075049
EXTRUSION BLOW
Linear Bearing -
Shaft - Stretching unit
Stretching Block
MOLDING
50197073 94075079
UMK-50197073 UMK-94075079
FILLER
94077032 94083035 (without
magnet)
95340024 (with
UMK-94077032 magnet)
Mandrel Support -
Bar gripper (flat) For oven &
INJECTION
MOLDING
load/unload wheel
94083430 (without
50183075 magnet) (95030020 with
magnet) & 94088580
UMK-50183075 (without magnet) =
95070043 (with magnet)
AIR COMPRESSOR
94032494 94032495
UMK-94032494 UMK-94032495
Rev. : VDF21012010 36
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
ROTARY CAPPER
Transfer Arm Transfer Arm
94087007 94083017
UMK-94087007 UMK-94083017
EXTRUSION BLOW
Contact Plate - Transfer
Axel
wheel
MOLDING
94083025 94083229
UMK-94083025 UMK-94083229
FILLER
94085460 (or 94087138
94075208) &
94085461 (or
94075209) UMK-94087138
INJECTION
MOLDING
wheel Transfer wheel
94087139 94087136
UMK-94087139 UMK-94087136
AIR COMPRESSOR
94083223 94083222
UMK-94083223 UMK-94083222
Rev. : VDF21012010 37
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
ROTARY CAPPER
Guide Plate - Transfer
Switching Lever
wheel
94083218 94088437
UMK-94083218 UMK-94088437
EXTRUSION BLOW
Plastic Guide - Plastic Guide - Transfer
Transfer wheel wheel
MOLDING
94044722 94044090
UMK-94044722 UMK-94044090
FILLER
94075202 94077200
UMK-94075202 UMK-94077200
INJECTION
MOLDING
wheel wheel
94075225 94077205
UMK-94075225 UMK-94077205
AIR COMPRESSOR
94075429 94075224
UMK-94075429 UMK-94075224
Rev. : VDF21012010 38
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
ROTARY CAPPER
Holder plate - Transfer Holder plate -
wheel Transfer wheel
94075215 94075216
UMK-94075215 UMK-94075216
EXTRUSION BLOW
Spring Load Transfer Spring Load Transfer
arm - Insert piece arm - Push Rod short
MOLDING
94083030 94083027
UMK-94083030 UMK-94083027
FILLER
94083028 50191793
UMK-94083028 UMK-50191793
INJECTION
MOLDING
arm - Cap
D-259
50205986 94083026
UMK-50205986 UMK-94083026
AIR COMPRESSOR
Spring Load
Transfer arm - Insulation Sleeve
Counter Nut
94083029 50219710
UMK-94083029 UMK-50219710
Rev. : VDF21012010 39
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
ROTARY CAPPER
Spacer bushing -
Bolt - Transfer arm
Suction Cup
94083032 94011913
UMK-94083032 UMK-94011913
EXTRUSION BLOW
Driving wheel - Suction
Shaft - Suction Cup
Cup
MOLDING
94011917 &
94044035
94083118
UMK-94011917 &
UMK-94083118
UMK-94044035
Driving wheel -
Flange - Suction Cup
Suction Cup
FILLER
95380009 94027007
UMK-95380009 UMK-94027007
INJECTION
MOLDING
Cup Cup
94044036 94083117
UMK-94044036 UMK-94083117
AIR COMPRESSOR
--- 94071327
N/A UMK-94071327
Rev. : VDF21012010 40
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
ROTARY CAPPER
Cam Plate - Transfert
Dome regulator Seat
Wheel
94087329 ---
UMK-94087329 N/A
EXTRUSION BLOW
Dome regulator Disk Threaded pin
MOLDING
--- 50180501
N/A UMK-50180501
FILLER
50180844 50180864
UMK-50180844 UMK-50180864
INJECTION
MOLDING
M8x12
50183758 50180897
UMK-50183758 UMK-50180897
AIR COMPRESSOR
Oring Spring
50186171 50191929
UMK-50186171 UMK-50191929
Rev. : VDF21012010 41
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
ROTARY CAPPER
Cheese head screw
Sealing cartridge Assy
M4x20
95140265 50180042
UMK-95140265 UMK-50180042
EXTRUSION BLOW
Cheese head screw
V-ring
M6x16
MOLDING
50180090 50186097
UMK-50180090 UMK-50186097
Oring Guide
FILLER
50186097 94033669
UMK-50186097 UMK-94033669
INJECTION
94077037 MOLDING
50177010
UMK-50177010 UMK-94077037
AIR COMPRESSOR
Sealing Support -
Washer - Cartridge
Cartridge
94077036
94077035
UMK-94077035 UMK-94077036
Rev. : VDF21012010 42
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
SIPA* ECS FX
MACHINE : SIPA ECS FX
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
ROTARY CAPPER
Nose cone with oring
Collet PCO Assy
Assy
2010117200 PZ 3000189500
UMSP-2010117200 UMSP-3000189500
EXTRUSION BLOW
Collet 28mm PCO
COLLET PCO 38mm
Assy
MOLDING
2000703800 ---
UMSP-2000703800 ---
COLLET PCO
MANIFOLD RIGHT
26mm
FILLER
--- 5106141
N/A UMSP-5106141R
INJECTION
MOLDING
5106141 5106474
UMSP-5106141L UMSP-5106474R
AIR COMPRESSOR
MANIFOLD LEFT
5106474
UMSP-5106474L
Rev. : VDF21012010 43
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
SIPA* SFR
MACHINE : SIPA SFR
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
ROTARY CAPPER
Oven spindle preform FINGER GRIPPER
holder LEFT
2000294700 40005806
UMSP-2000294700 UMSP-40005806
EXTRUSION BLOW
FINGER GRIPPER
ARM
RIGHT
MOLDING
40004727 40005807
UMSP-40004727 UMSP-40005807
GRIPPER
PIVOT PLATE
HOLDER PLATE
FILLER
5954576 5954577
UMSP-5954576 UMSP-5954577
SHOULDER
SHOULDER LARGE
INJECTION
MOLDING
SMALL
--- ---
0077-009-01-09 0077-009-01-08
AIR COMPRESSOR
THREADED
SPRING SMALL
HOLDER
--- ---
0077-009-01-10 0077-009-01-06
Rev. : VDF21012010 44
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
ROTARY CAPPER
SPRING LARGE Gripper Finger Right
--- 40343222
0077-009-01-07 UMSP-40343225
EXTRUSION BLOW
Mold Seal Gripper Finger Left
MOLDING
40344111 40343225
UMSP-40344111 UMSP-40343222
FILLER
--- PG101220F0
0077-011-01-00 UMSP-PG101220F0
Compression spring
INJECTION
MOLDING
---
0077-011-01-03
AIR COMPRESSOR
Rev. : VDF21012010 45
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
Rev. : VDF21012010 46
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
ROTARY CAPPER
(Chimney) (Chimney)
Improved Solution Improved Solution
P03A00333403 ---
UMAZ-
0121-001-01-04
P03A00333403
EXTRUSION BLOW
Anti-Rotation Device Anti-Rotation Device
(Chimney) (Chimney)
MOLDING
Improved Solution Improved Solution
--- ---
0121-001-01-05 0121-001-01-01
Anti-Rotation
Anti-Rotation Device
Device
(Chimney)
(Chimney)
Improved Solution
FILLER
Improved Solution
UMAL-300 0249
UMAL-57300744223
418
Anti-Rotation Device
(Chimney)
Main shaft Linker
INJECTION
MOLDING
Improved Solution
Linker
--- ---
0275-001-01-02 0275-001-01-01
AIR COMPRESSOR
Rev. : VDF21012010 47
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
Rev. : VDF21012010 48
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
UNILOY*
MACHINE : UNILOY
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
ROTARY CAPPER
Cotter Retainer
2153-402 2253-402
UMU-2153402 UMU-2253402
EXTRUSION BLOW
End piece Air diffusor
MOLDING
25033 902-39-47
UMU-25033 UMU-9023947
FILLER
INJECTION
MOLDING
AIR COMPRESSOR
Rev. : VDF21012010 49
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
Rev. : VDF21012010 50
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
SIDEL* La Girondine*
MACHINE : SIDEL La Girondine
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
"C" Bracket
ROTARY CAPPER
Trolley assembly
IMPROVE
Improvement solution
SOLUTION
--- ---
0104-001-01-01 0104-001-01-03
EXTRUSION BLOW
Support Guide Tube Shaft harden 25mm
Assy IMPROVE IMPROVE
MOLDING
SOLUTION SOLUTION
--- DCVG002880
0104-001-01-20 UMS-DCVG002880
FILLER
--- ---
0104-001-01-32 0104-001-01-21
Security Bracket
IMPROVE Spring
INJECTION
MOLDING
SOLUTION
--- ---
0104-001-01-30 0104-001-01-17
AIR COMPRESSOR
Shock Absorber
IMPROVE Membrane
SOLUTION
--- 4253250802
0104-001-01-31 UMS-4253250802
Rev. : VDF21012010 51
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
ROTARY CAPPER
Vent tube Vent tube
--- 8DCVG0003130
--- UMS-8DCVG0003130
EXTRUSION BLOW
Vent tube diffusor Vent tube Diffusor
MOLDING
--- ---
--- ---
FILLER
--- ---
--- ---
Pin
Fork
INJECTION
MOLDING
(Improved solution)
8DCVG002610 8DCVG002970
UMS-
UMS-8DCVG002970
8DCVG002610
AIR COMPRESSOR
8DCVG0022670 8DCVG0022670
UMS- UMS-
8DCVG0022670 8DCVG0022670M
Rev. : VDF21012010 52
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
SIDEL* ALSIM*
MACHINE : SIDEL ALSIM
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
BLOW NOZZLE
ROTARY CAPPER
IMPROVED
SOLUTION
---
---
EXTRUSION BLOW
MOLDING
FILLER
INJECTION
MOLDING
AIR COMPRESSOR
Rev. : VDF21012010 53
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
KHS* (SIG*)
MACHINE : KHS (SIG)
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
ROTARY CAPPER
Clamp
---
0218-001-01-01
EXTRUSION BLOW
MOLDING
FILLER
INJECTION
MOLDING
AIR COMPRESSOR
Rev. : VDF21012010 54
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
ROTARY CAPPER
Trolley assembly
Trolley
Improvement solution
---
0251-001-01-00 0251-001-01-23
EXTRUSION BLOW
Basin catch safety
Basin catch safety
improvement
MOLDING
0269991294 0269991294
UMS-0269991294 UMS-0269991294M
FILLER
0251-001-01-06 0251-001-01-51
INJECTION
MOLDING
0251-001-01-24 0251-001-01-15
AIR COMPRESSOR
0251-001-01-03 0251-001-01-04
Rev. : VDF21012010 55
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
ROTARY CAPPER
Round bottom plate Spring support
0251-001-01-07 0251-001-01-12
EXTRUSION BLOW
Inside Spring Locking ring
MOLDING
0251-001-01-22 0251-001-01-16
FILLER
0251-001-01-28 0251-001-01-33
INJECTION
MOLDING
SS 6003RS 0251-001-01-29
AIR COMPRESSOR
0251-001-01-30 0251-01-01-13
Rev. : VDF21012010 56
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
ROTARY CAPPER
Vent tube Main Block
0251-001-01-10 0251-001-01-05
EXTRUSION BLOW
Main Shaft Side Shaft
MOLDING
0251-001-01-48 0251-001-01-20
FILLER
INJECTION
MOLDING
AIR COMPRESSOR
Rev. : VDF21012010 57
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
Rev. : VDF21012010 58
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
HUSKY*
MACHINE : HUSKY
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
Neck Ring
Recondition (repair the
ROTARY CAPPER
taper and bring back to
the original dimension
to eliminate the
vertical flash problem
with a provent solution
in application since
more than 4 years)
EXTRUSION BLOW
MOLDING
FILLER
INJECTION
MOLDING
AIR COMPRESSOR
Rev. : VDF21012010 59
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
Rev. : VDF21012010 60
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
STRETCH BLOW
MOLDING
Description Description
Picture OEM Part# Picture OEM Part#
UM Part # UM Part #
ROTARY CAPPER
(with improved (with improved
material and finish = material and finish =
improve life) improve life)
2-30-144-01 2-30-202-01
UMS-2-30-144-01 UMS-2-30-202-01
EXTRUSION BLOW
Compressor Piston - Compressor Bushing -
MOLDING
Stage 3 Stage 3
--- ---
--- ---
FILLER
PSB027-113 PSB029-058
UMBM-PSB027-113-S3 UMBM-PSB029-058-S3
INJECTION
MOLDING
#134R 2ST PSB029-066 2ST
PSB027-001 PSB029-066
UMBM-PSB027-001-S2 UMBM-PSB029-066-S2
AIR COMPRESSOR
PSB029-083 PSB027-001
UMBM-PSB029-083-S1 UMBM-PSB027-001-S1
Rev. : VDF21012010 61
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
Tooling
You’re interested in reducing your raw material costs through preform modifications?
UM should be part of your solution!
Our Technical Team can assist you from tooling change design to its final installation.
Please contact your Technical Sale Representative should you have any request in regards
to tooling change!
Rev. : VDF21012010 62
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
Custom design
A machine is causing you a lot of worries? Frequently stopping for maintenance?
Consuming too much energy? Its productivity leaves a lot to be desired? Contact us!
ISO:9001
Rev. : VDF21012010 63
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
Index
BY OEM MANUFACTURING AND BY OEM NUMBER
Numéro
Machine OEM Numéro UM Improved Custom Description Page
Bellis & Morcon -- -- Compressor Piston - Stage 3 61
Bellis & Morcon -- -- Compressor Bushing - Stage 3 61
Bellis & Morcon 2-30-144-01 UMS-2-30-144-01 Improved Compressor Rod - Stage 1 & 2 61
Bellis & Morcon 2-30-202-01 UMS-2-30-202-01 Improved Compressor Rod - Stage 3 61
Bellis & Morcon PSB027-001 UMBM-PSB027-001-S1 Succion valve PSB027-001 1ST 61
Bellis & Morcon PSB027-001 UMBM-PSB027-001-S2 Succion valve #134R 2ST 61
Bellis & Morcon PSB027-113 UMBM-PSB027-113-S3 Succion valve #92FDR 3ST 61
Bellis & Morcon PSB029-058 UMBM-PSB029-058-S3 Delivery valve #92FDR 3ST 61
Bellis & Morcon PSB029-066 UMBM-PSB029-066-S2 Delivery valve PSB029-066 2ST 61
Bellis & Morcon PSB029-083 UMBM-PSB029-083-S1 Delivery valve PSB029-083 1ST 56
KHS (SIG) -- 0218-001-01-01 Clamp 54
KHS (SIG, Krupp) 5014133 UMK-5014133 Oring nitrile dia int. 19.5mm x 1mm section 25
KHS (SIG, Krupp) 50174852 UMK-50174852 Axial needle bearing - Blow station 33
KHS (SIG, Krupp) 50176251 UMK-50176251 Spherical Bearing - Base Lifting Device 33
KHS (SIG, Krupp) 50177010 UMK-50177010 Road seal 42
KHS (SIG, Krupp) 50180042 UMK-50180042 Cheese head screw M4x20 42
KHS (SIG, Krupp) 50180090 UMK-50180090 Cheese head screw M6x16 42
KHS (SIG, Krupp) 50180501 UMK-50180501 Threaded pin 41
KHS (SIG, Krupp) 50180844 UMK-50180844 Hexagonal nut 41
KHS (SIG, Krupp) 50180864 UMK-50180864 Shim 41
KHS (SIG, Krupp) 50180897 UMK-50180897 Shim 41
KHS (SIG, Krupp) 50182896 UMK-50182896 Tightening Pin (for arms opening / closing mechanism) 33
KHS (SIG, Krupp) 50183075 UMK-50183075 Bar gripper (flat) 36
KHS (SIG, Krupp) 50183758 UMK-50183758 Counter sunk screw M8x12 41
KHS (SIG, Krupp) 50184102 UMK-50184102 Spherical Bearing - Base Lifting Device 33
KHS (SIG, Krupp) 50186097 UMK-50186097 V-ring 42
KHS (SIG, Krupp) 50186097 UMK-50186097 Oring 42
KHS (SIG, Krupp) 50186171 UMK-50186171 Driving Band, Piston seal & O-ring - Connecting piston 33
KHS (SIG, Krupp) 50186171 UMK-50186171 Oring 41
KHS (SIG, Krupp) 50186403 UMK-50186403 Grooved ball bearing 25
KHS (SIG, Krupp) 50186403 UMK-50186403 Grooved ball bearing 27
KHS (SIG, Krupp) 50188136 UMK-50188136 Rod Seal 12mm (include oring)- Sealing Cartridge 22
KHS (SIG, Krupp) 50189618 UMK-50189618 Roller - Connecting piston 35
KHS (SIG, Krupp) 50189618 UMK-50189618 Wipper - Connecting piston 35
KHS (SIG, Krupp) 50191793 UMK-50191793 Spring Load Transfer arm - Pressure Spring D-263V-03 39
KHS (SIG, Krupp) 50191929 UMK-50191929 Spring 41
KHS (SIG, Krupp) 50191939 UMK-50191939 Spacer - Diaphragm Insert (Pancake) 29
KHS (SIG, Krupp) 50191962 UMK-50191963 Driving Band, Piston seal & O-ring - Connecting piston 34
KHS (SIG, Krupp) 50192043 UMK-50192043 Spherical Bush - Connection piston 35
KHS (SIG, Krupp) 50192074 UMK-50192074 Shaft - Connecting piston 35
KHS (SIG, Krupp) 50192133 UMK-50192133 Pressure spring - Blow Station 32
KHS (SIG, Krupp) 50195819 UMK-50195819 Stretch Rod Cylinder - REPAIR INTERNAL SURFACE 33
KHS (SIG, Krupp) 50197073 UMK-50197073 Linear Bearing - Stretching Block 36
KHS (SIG, Krupp) 50197793 UMK-50197793 Driving Band, Piston seal & O-ring - Connecting piston 34
KHS (SIG, Krupp) 50205986 UMK-50205986 Spring Load Transfer arm - Pressure Spring D-259 39
KHS (SIG, Krupp) 50209164 UMK-50209164 Joint Bearing - Blow Station 33
KHS (SIG, Krupp) 50211104R UMK-50211104R Refurb + Imp Piston Repair - P1, P2 29
KHS (SIG, Krupp) 50211104 UMK-50211104 Brand NEW Piston P1, P2, Exhaust and Connecting 29
KHS (SIG, Krupp) 50219710 UMK-50219710 Insulation Sleeve 39
KHS (SIG, Krupp) 50256539 UMK-50256539 Pilot Valve for Exhaust Valve 29
KHS (SIG, Krupp) 50279201 UMK-50279201 Pilot Valve for P1 and P2 Valve 29
KHS (SIG, Krupp) 50361005 UMK-50361005 Inner ring 21
KHS (SIG, Krupp) 50361061 UMK-50361061R Refurb + Imp Piston Repair - P1, P2 & Exhaust 21
KHS (SIG, Krupp) 50361061 UMK-50361061 Improved Piston Brand New - P1, P2 & Exhaust 21
KHS (SIG, Krupp) 50363505 UMK-50363505 Pilot Valve Exhaust 21
KHS (SIG, Krupp) 50363507 UMK-50363507 Pilot Valve P1 & P2 27
KHS (SIG, Krupp) 50368847 UMK-50368847 Washer spring 21
KHS (SIG, Krupp) 50370831 UMK-50370831 Lip Seal Ring 21
KHS (SIG, Krupp) 50373650 UMK-50373650 Lip Seal Ring 27
KHS (SIG, Krupp) 50373907 UMK-50373907 Cup spring 25
KHS (SIG, Krupp) 50374992 UMK-50374992 Lip Seal Ring 21
KHS (SIG, Krupp) 50377603 UMK-50377603 Lip Seal Ring 21
KHS (SIG, Krupp) 50379550 UMK-50379550 Lip Seal Ring 40
KHS (SIG, Krupp) 94011913 UMK-94011913 Spacer bushing - Suction Cup 40
KHS (SIG, Krupp) 94011917 UMK-94011917 Shaft - Suction Cup 40
Rev. : VDF21012010 64
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
Numéro
Machine OEM Numéro UM Improved Custom Description Page
KHS (SIG, Krupp) 94027007 UMK-94027007 Flange - Suction Cup 36
KHS (SIG, Krupp) 94032494 UMK-94032494 Bar gripper (R 17.5) 36
KHS (SIG, Krupp) 94032495 UMK-94032495 Bar gripper (R 22.5) 42
KHS (SIG, Krupp) 94033669 UMK-94033669 Guide 34
KHS (SIG, Krupp) 94039007 UMK-94039007 Mandrel Guide Bushing (12mm) 34
KHS (SIG, Krupp) 94039487 UMK-94039487 Spacer Bush 34
KHS (SIG, Krupp) 94039488 UMK-94039488 Sproket 34
KHS (SIG, Krupp) 94039498 UMK-94039498 Mandrel Body 34
KHS (SIG, Krupp) 94041150 UMK-94041150 Mandrel Guide Bushing (14mm) 34
KHS (SIG, Krupp) 94043339 UMK-94043339 Mandrel Guide Bushing (12mm) 34
KHS (SIG, Krupp) 94043588 UMK-94043588 Mandrel Guide Bushing (14mm) 34
KHS (SIG, Krupp) 94044035 UMK-94044035 Shaft - Suction Cup 40
KHS (SIG, Krupp) 94044036 UMK-94044036 Pinion shaft - Suction Cup 40
KHS (SIG, Krupp) 94044090 UMK-94044090 Plastic Guide - Transfer wheel 38
KHS (SIG, Krupp) 94044722 UMK-94044722 Plastic Guide - Transfer wheel 38
KHS (SIG, Krupp) 94075049 UMK-94075049 Articulated lever 36
KHS (SIG, Krupp) 94056011 UMK-94056011 Locking Screw 40
KHS (SIG, Krupp) 94071327 UMK-94071327 Washer - Suction Cup 31
KHS (SIG, Krupp) 94075038 UMK-94075038 Locking Mechanism Pin (for arms locking mechanism) 31
KHS (SIG, Krupp) 94075039 UMK-94075039 Guide Bushing – Right 31
KHS (SIG, Krupp) 94075041 UMK-94075041 Guide Bushing Big - Left Arm 31
KHS (SIG, Krupp) 94075042 UMK-94075042 Guide Bushing Small - Left 32
KHS (SIG, Krupp) 94075043 UMK-94075043 Locking Bolt - Blow Station 36
KHS (SIG, Krupp) 94075079 UMK-94075079 Shaft - Stretching unit 33
KHS (SIG, Krupp) 94075101 UMK-94075101 Shaft - Base Lifting Device 32
KHS (SIG, Krupp) 94075102 UMK-94075102 Rack (for arms opening / closing mechanism) 31
KHS (SIG, Krupp) 94075123 UMK-94075123 Bolt (for arms opening / closing mechanism) 22
KHS (SIG, Krupp) 94075167 UMK-94075167 Blow Station - Bearing Wheel 31
KHS (SIG, Krupp) 94075167 UMK-94075167 Bearing Wheel 38
KHS (SIG, Krupp) 94075202 UMK-94075202 Plastic Guide - Transfer wheel 37
KHS (SIG, Krupp) 94075208 UMK-94075208 Contact Plate - Transfer wheel 37
KHS (SIG, Krupp) 94075209 UMK-94075209 Contact Plate - Transfer wheel 39
KHS (SIG, Krupp) 94075215 UMK-94075215 Holder plate - Transfer wheel 39
KHS (SIG, Krupp) 94075216 UMK-94075216 Holder plate - Transfer wheel 38
KHS (SIG, Krupp) 94075224 UMK-94075224 Holder plate - Transfer wheel 38
KHS (SIG, Krupp) 94075225 UMK-94075225 Guide outlet - Transfer wheel 38
KHS (SIG, Krupp) 94075429 UMK-94075429 Guide outlet - Transfer wheel 36
KHS (SIG, Krupp) 94077032 UMK-94077032 Refurb + Imp Streching Support REPAIR 42
KHS (SIG, Krupp) 94077035 UMK-94077035 Washer - Cartridge 42
KHS (SIG, Krupp) 94077036 UMK-94077036 Sealing Support - Cartridge 42
KHS (SIG, Krupp) 94077037 UMK-94077037 Flange - Cartridge 34
KHS (SIG, Krupp) 94077039 UMK-94077039 Guide pin - Connecting piston 35
KHS (SIG, Krupp) 94077040 UMK-94077040 Support Plate - Connecting Piston 35
KHS (SIG, Krupp) 94077041 UMK-94077041 Fork - Connecting Piston 35
KHS (SIG, Krupp) 94077050 UMK-94077050 Roller pin 29
KHS (SIG, Krupp) 94077054 UMK-94077054 Fuse - Diaphragm Insert (Pancake) 32
KHS (SIG, Krupp) 94077079 UMK-94077079 Stop Sleeve (for arms opening / closing mechanism) 32
KHS (SIG, Krupp) 94077080 UMK-94077080 Bearing Axle - Blow Station 32
KHS (SIG, Krupp) 94077081 UMK-94077081 Bolt - Blow Station 36
KHS (SIG, Krupp) 94077134 UMK-94077134 Spring 32
KHS (SIG, Krupp) 94077135 UMK-94077135 Guide Bush (for arms opening / closing mechanism) 32
KHS (SIG, Krupp) 94077149 UMK-94077149 Stop Bolt (for arms opening / closing mechanism) 33
KHS (SIG, Krupp) 94077152 UMK-94077152 Connecting Shaft - Blow Station 38
KHS (SIG, Krupp) 94077200 UMK-94077200 Guide - Transfer wheel 38
KHS (SIG, Krupp) 94077205 UMK-94077205 Guide - Transfer wheel 37
KHS (SIG, Krupp) 94083017 UMK-94083017 Transfer Arm 37
KHS (SIG, Krupp) 94083025 UMK-94083025 Axel 39
KHS (SIG, Krupp) 94083026 UMK-94083026 Spring Load Transfer arm - Cap 39
KHS (SIG, Krupp) 94083027 UMK-94083027 Spring Load Transfer arm - Push Rod short 39
KHS (SIG, Krupp) 94083028 UMK-94083028 Spring Load Transfer arm - Push Rod long 39
KHS (SIG, Krupp) 94083029 UMK-94083029 Spring Load Transfer arm - Counter Nut 39
KHS (SIG, Krupp) 94083030 UMK-94083030 Spring Load Transfer arm - Insert piece 39
KHS (SIG, Krupp) 94083032 UMK-94083032 Bolt - Transfer arm 40
KHS (SIG, Krupp) 94083035 UMK-94083035 Mandrel Support - For transfer wheel without magnet 36
KHS (SIG, Krupp) 94083117 UMK-94083117 Pinion shaft – Suction Cup 40
KHS (SIG, Krupp) 94083118 UMK-94083118 Driving wheel - Suction Cup 40
KHS (SIG, Krupp) 94083218 UMK-94083218 Guide Plate - Transfer wheel 38
KHS (SIG, Krupp) 94083222 UMK-94083222 Upper Guide Plate - Transfer wheel 37
KHS (SIG, Krupp) 94083223 UMK-94083223 Lower Guide Plate - Transfer wheel 37
KHS (SIG, Krupp) 94083224 UMK-94083224 Plastic Guides- Transfer wheel 30
KHS (SIG, Krupp) 94083225 UMK-94083225 Plastic Guides - Transfer wheel 29
Rev. : VDF21012010 65
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
Numéro
Machine OEM Numéro UM Improved Custom Description Page
KHS (SIG, Krupp) 94083229 UMK-94083229 Contact Plate - Transfer wheel 37
KHS (SIG, Krupp) 94083237 UMK-94083237 Plastic Guides- Transfer wheel 30
KHS (SIG, Krupp) 94083252 UMK-94083252 Plastic Guides- Transfer wheel 30
KHS (SIG, Krupp) 94083263 UMK-94083263 Plastic Guides- Transfer wheel 30
KHS (SIG, Krupp) 94083430 UMK-94083430 Mandrel Support - For oven & load/unload wheel - Metal Only 36
KHS (SIG, Krupp) 94083801 UMK-94083801 Plastic Guides - Transfer wheel 29
KHS (SIG, Krupp) 94085460 UMK-94085460 Contact Plate - Transfer wheel 37
KHS (SIG, Krupp) 94085461 UMK-94085461 Contact Plate - Transfer wheel 37
KHS (SIG, Krupp) 94086011 UMK-94086011 Stabilizator finger 28mm - Blow Station 33
KHS (SIG, Krupp) 94086224 UMK-94086224R Refurbish DIAPHRAM INSERT RECONDITION (or Pancake) 29
KHS (SIG, Krupp) 94086552 UMK-94086552 Piston - Connecting Piston 35
KHS (SIG, Krupp) 94086553 UMK-94086553 Holder - Connecting Piston 35
KHS (SIG, Krupp) 94087007 UMK-94087007 Transfer Arm 37
KHS (SIG, Krupp) 94087114 UMK-94087114 Plastic Guides - Transfer wheel 31
KHS (SIG, Krupp) 94087127 UMK-94087127 Plastic Guides - Transfer wheel 30
KHS (SIG, Krupp) 94087135 UMK-94087135 Plastic Guides - Transfer wheel 31
KHS (SIG, Krupp) 94087136 UMK-94087136 Guide Plate - Transfer wheel 37
KHS (SIG, Krupp) 94087137 UMK-94087137 Plastic Guides - Transfer wheel 30
KHS (SIG, Krupp) 94087138 UMK-94087138 Guide Plate - Transfer wheel 37
KHS (SIG, Krupp) 94087139 UMK-94087139 Guide Plate - Transfer wheel 37
KHS (SIG, Krupp) 94087140 UMK-94087140 Plastic Guides - Transfer wheel 30
KHS (SIG, Krupp) 94087141 UMK-94087141 Plastic Guides - Transfer wheel 30
KHS (SIG, Krupp) 94087145 UMK-94087145 Plastic Guides - Transfer wheel 30
KHS (SIG, Krupp) 94087329 UMK-94087329 Cam Plate - Transfert Wheel 41
KHS (SIG, Krupp) 94088437 UMK-94088437 Switching Lever 38
KHS (SIG, Krupp) 94088580 UMK-94088580 Mandrel Support - For oven & load/unload wheel - Metal only 36
KHS (SIG, Krupp) 94089640 UMK-94089640 Trust Bearing Support - Blow Station 32
KHS (SIG, Krupp) 94089648 UMK-94089648 Stopper - Blow Station 32
KHS (SIG, Krupp) 94090898 UMK-94090898 Custom Gripper Left 31
KHS (SIG, Krupp) 94090899 UMK-94090899 Custom Gripper Right 31
KHS (SIG, Krupp) 94099044 UMK-94099044 Axle - Transfer arm assy 24
KHS (SIG, Krupp) 94099048 UMK-94099048 Mandrel Support - LOAD / UNLOAD - Metal only 21
KHS (SIG, Krupp) 94099167 UMK-94099167 Guide Small 12mm - Sealing Cartridge 22
KHS (SIG, Krupp) 94099248 UMK-94099248 Holder plate long - Transfer arm 2 & 3 24
KHS (SIG, Krupp) 94099262 UMK-94099262 Mandrel Support - BLOW STATION - Metal only 21
KHS (SIG, Krupp) 94099279 UMK-94099279 Mandrel Base 25
KHS (SIG, Krupp) 94099343 UMK-94099343 Guide Bushing - Rack shaft 23
KHS (SIG, Krupp) 94099358 UMK-94099358 Locking bolt - Locking Mechanims 23
KHS (SIG, Krupp) 94099469 UMK-94099469 Mandrel - Chain Wheel (Sprocket) 25
KHS (SIG, Krupp) 94112313 UMK-94112313 Mandrel - Guide Bush Large 12mm 25
KHS (SIG, Krupp) 94112313 UMK-94112313 Guide bushing large 12mm 28
KHS (SIG, Krupp) 94112957 UMK-94112957 Tooted segment - Locking mechanism 21
KHS (SIG, Krupp) 94127907 UMK-94127907 Stop ring 24
KHS (SIG, Krupp) 94129190 UMK-94129190 Piston - Connecting piston 24
KHS (SIG, Krupp) 94129201 UMK-94129201 Guide Large 12mm - Sealing Cartridge 22
KHS (SIG, Krupp) 94129408 UMK-94129408 Mandrel - Bumper 25
KHS (SIG, Krupp) 94129491 UMK-94129491 Guide bushing Large - Locking mechanims 23
KHS (SIG, Krupp) 94129651 UMK-94129651 Guide bushing small 12mm 28
KHS (SIG, Krupp) 94129651 UMK-94129651 Mandrel Insert Oring 27
KHS (SIG, Krupp) 94129654 UMK-94129654 Mandrel - Spacer bush 21
KHS (SIG, Krupp) 94129654 UMK-94129654 Spacer bush (G3) 25
KHS (SIG, Krupp) 94129672 UMK-94129672 Refurb + Imp Connecting Shaft 24
KHS (SIG, Krupp) 94129697 UMK-94129697 Refurb + Imp Bearing Tube 25
KHS (SIG, Krupp) 94129896 UMK-94129896 Stretch rod holder 24
KHS (SIG, Krupp) 94129897 UMK-94129897 Pin - Stretch rod holder 24
KHS (SIG, Krupp) 94131041 UMK-94131041 Transfer arm short - Transfer wheel 1 22
KHS (SIG, Krupp) 94131064 UMK-94131064 Collar bush - Transfer arm assy 24
KHS (SIG, Krupp) 94131330 UMK-94131330 Holder plate long - Transfer arm 1 24
KHS (SIG, Krupp) 94131503 UMK-94131503 Contact Plate 23
KHS (SIG, Krupp) 94131504 UMK-94131504 Guide Arm Top Side - Mandrel Discharger 23
KHS (SIG, Krupp) 94131505 UMK-94131505 Guide Arm Bottom Side - Mandrel Discharger 23
KHS (SIG, Krupp) 94131506 UMK-94131506 Guide Arm Top Side - Mandrel Discharger 23
KHS (SIG, Krupp) 94131507 UMK-94131507 Guide Arm Bottom Side - Mandrel Discharger 23
KHS (SIG, Krupp) 94134013 UMK-94134013 Transfer arm long - Transfer wheel 2 & 3 22
KHS (SIG, Krupp) 94135100/7559 UMK-94135100/7559 Mandrel Support - T1, T2, T3 - Metal only 21
KHS (SIG, Krupp) 94136308 UMK-94136308 Bolt 27
KHS (SIG, Krupp) 94137018 UMK-94137018 Mandrel Support - Blow Station - Metal onky 21
KHS (SIG, Krupp) 94138686 UMK-94138686 Flange - Sealing Cartridge 22
KHS (SIG, Krupp) 94138687 UMK-94138687 Sealing Support - Sealing Cartridge 22
KHS (SIG, Krupp) 94138688 UMK-94138688 Distance Washer - Sealing Cartridge 22
KHS (SIG, Krupp) 94150433 UMK-94150433 Piston - Connecting piston 24
Rev. : VDF21012010 66
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
Numéro
Machine OEM Numéro UM Improved Custom Description Page
KHS (SIG, Krupp) 94150473 UMK-94150473 Guide Bushing - Locking Mechanims 23
KHS (SIG, Krupp) 94150475 UMK-94150475 Guide Bushing Small - Locking Mechanims 23
KHS (SIG, Krupp) 94150895 UMK-94150895 Mandrel base 26
KHS (SIG, Krupp) 94150896 UMK-94150896 Bumper 27
KHS (SIG, Krupp) 94150897 UMK-94150897 Thrust washer 27
KHS (SIG, Krupp) 94150898 UMK-94150898 Thrust washer 27
KHS (SIG, Krupp) 94151722 UMK-94151722 Spacer bush 26
KHS (SIG, Krupp) 94152467 UMK-94152467 Mandrel base (PH) 26
KHS (SIG, Krupp) 94152498 UMK-94152498 Spacer bush (PH) 26
KHS (SIG, Krupp) 94152780 UMK-94152780 Bumper 27
KHS (SIG, Krupp) 94154941 UMK-94154941 Mandrel Support - T1, T2, T3 – Metal only 21
KHS (SIG, Krupp) 95030020 UMK-95030020 Mandrel Support - For oven & load/unload wheel with magnet 36
KHS (SIG, Krupp) 95070043 UMK-95070043 Mandrel Support - For oven & load/unload wheel with magnet 36
KHS (SIG, Krupp) 95140264 UMK-95140264 Connecting Piston Assy BRAND NEW 35
KHS (SIG, Krupp) 95140264 UMK-95140264R Refurbish Connecting Piston Assy Repair 35
KHS (SIG, Krupp) 95140265 UMK-95140265 Sealing cartridge Assy 42
KHS (SIG, Krupp) 95140445/623 UMK-95140445/623 Mandrel Support - Blow Station - With Magnet 21
KHS (SIG, Krupp) 95140632 UMK-95140632 Mandrel Support - Blow Station - With Magnet 21
KHS (SIG, Krupp) 95180336 UMK-95180336 Mandrel base assy (G3) 25
KHS (SIG, Krupp) 95180519 UMK-95180519 Mandrel base assy 26
KHS (SIG, Krupp) 95180539 UMK-95180539 Mandrel base assy (PH) 26
KHS (SIG, Krupp) 95340024 UMK-95340024 Mandrel Support - For transfer wheel with magnet 36
KHS (SIG, Krupp) 95340110 UMK-95340110 Mandrel Support - Load / Unload - With Magnet 21
KHS (SIG, Krupp) 95340166/167 UMK-95340166/167 Mandrel Support - T1, T2, T3 - With Magnet 21
KHS (SIG, Krupp) 95380009 UMK-95380009 Driving wheel - Suction Cup 40
KHS (SIG, Krupp) -- -- Custom Mandrel Insert (Head) - Product depending parts 21
KHS (SIG, Krupp) -- -- Custom Stretch Rod 23
KHS (SIG, Krupp) -- -- Custom Mandrel insert (with 4 steps) 26
KHS (SIG, Krupp) -- 0001-015-03-12 Thrust ring (PH) 27
KHS (SIG, Krupp) -- -- Custom Mandrel insert (PH) 26
KHS (SIG, Krupp) -- -- Refurb + Imp Internal Body Valve Repair - P1 , P2, Exhaust & Connecting 29
KHS (SIG, Krupp) -- -- Mandrel Guide Bushing (15mm) 33
KHS (SIG, Krupp) -- -- Mandrel Guide Bushing (15mm) 33
KHS (SIG, Krupp) -- -- Custom Mandrel Insert (Head) - Product depending parts 33
KHS (SIG, Krupp) -- -- Custom Transport Mandrel 34
KHS (SIG, Krupp) -- -- Casing - Suction Cup 39
KHS (SIG, Krupp) -- -- Dome regulator Seat 40
KHS (SIG, Krupp) -- -- Dome regulator Disk 40
KHS (SIG, Krupp) -- -- Custom Stretch Rod 32
Krones 5970062 UMKN-5970062 Pilot valve 6
Krones 5970063 UMKN-5970063 Pilot valve 6
Krones 6213044 UMKN-6213044 Oring 7
Krones 6213047 UMKN-6213047 Oring 7
Krones 45907364 UMKN-45907364 Piston 6
Krones 48734444 UMKN-48734444 Cylinder guide 7
Krones 48734558 UMKN-48734558 Cylinder guide 7
Krones -- 0099-002-01-04 Wheel 3
Krones -- 0099-002-01-01 Shaft - Chain link 3
Krones -- 0099-002-01-00 Shaft - Chain link Assy 3
Krones -- 0099-002-01-02 Chain link 3
Krones -- -- Custom Spindle cooling shield 3
Krones -- 0099-002-01-03 Wheel shaft 3
Krones -- 0099-002-01-05 Bushing 3
Krones -- 0099-003-01-00 Spindle assy 3
Krones -- 0099-003-01-01 Spindle sprocket 3
Krones -- 0099-003-01-02 Spindle Bearing large 4
Krones -- 0099-003-01-03 Spindle Bearing small 4
Krones -- 0099-003-01-04 Spacer 4
Krones -- 0099-003-01-05 Ball Support 4
Krones -- 0099-003-01-06 Circlips 4
Krones -- 0099-003-01-07 Spring pin 4
Krones -- 0099-003-01-08 Main shaft 4
Krones -- 0099-003-01-09 Washer 4
Krones -- 0099-003-01-10 Spring 4
Krones -- 0099-003-01-11 Spacer 5
Krones -- 0099-003-01-12 Spacer 5
Krones -- 0099-003-01-13 Bushing 5
Krones -- 0099-003-01-14 Spacer 5
Krones -- 0099-004-01-01 Preform holder body 5
Krones -- 0099-004-01-02 Preform holder head cap 5
Krones -- 0099-004-01-03 Finger 5
Rev. : VDF21012010 67
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
Numéro
Machine OEM Numéro UM Improved Custom Description Page
Krones -- 0099-004-01-04 Preform holder base 5
Krones -- 0099-004-01-05 Preform holder cap 6
Krones -- 0099-004-01-06 Oring 6
Krones -- 0099-004-01-07 Oring 6
Krones -- 0099-004-01-08 Preform holder head body 6
Krones -- 0099-004-01-09 Spring washer 6
Krones -- 0099-004-01-10 Pin 6
Krones -- 0099-004-01-11 Preform holder shaft 6
Krones 0-900-80-246-8 UMKN-0900802468 Custom Spindle cooling shield 3
Krones 0-900-966-245 UMKN-0900966245 Preform holder assy 5
Krones 0-901-896-352-63 UMKN-0901896352-63 Custom Finger Gripper 3
Krones 0-950-00-002-2 UMKN-0950000022 Seal 7
Krones 1-780-50-067-0 UMKN-1780500670 Stretch rod bushing 7
Krones 1-788-33-114-0 UMKN-1788331140 Stretch rod bushing 7
Krones 1-800-20-488-8 UMKN-1800204888 Custom Spindle cooling shield 3
Krones 1-901-12-368-5 UMKN-1901123685 Custom Spindle cooling shield 3
Krones KR1786334430 UMKN-KR1786334430 Improved Custom Shaft (station) 5
Rotary Cappers -- 0121-001-01-04 Improved Custom Anti-Rotation Device (Chimney) 47
Rotary Cappers -- 0121-001-01-05 Improved Custom Anti-Rotation Device (Chimney) 47
Rotary Cappers -- 0121-001-01-01 Improved Custom Anti-Rotation Device (Chimney) 47
Rotary Cappers 300 0249 418 UMAL-300 0249 418 Improved Custom Anti-Rotation Device (Chimmey) 47
Rotary Cappers 57300744223 UMAL-57300744223 Improved Custom Anti-Rotation Device (Chimmey) 47
Rotary Cappers P03A00333403 UMAZ-P03A00333403 Improved Custom Anti-Rotation Device (Chimney) 47
Rotary Cappers -- 0275-001-01-01 Main shaft Linker 47
Rotary Cappers -- 0275-001-01-02 Improved Custom Anti-Rotation Device (Chimney) 47
Sidel 17263 UMS-17263L or R Refurbish Rotary union type R.S. double flow left or right 8
Sidel 00000138235 UMS-138235 Valve Float 17&20
Sidel 00000116584 UMS-116584 Valve Bushing 20
Sidel 00000116584 UMS-116584 Refurbish Valve Bushing refurbish 20
Sidel 0000087399/695 UMS-087399/695 Refurb + Imp S2 Blow/ Preblow / Exhaust Valve Assy repair 11
Sidel 0000087692 UMS-087692 Refurb + Imp S2 Blow/ Preblow / Exhaust Valve Assy repair 11
Sidel 0000087693 UMS-087693 Refurb + Imp S2 Blow/ Preblow / Exhaust Valve Assy repair 11
Sidel 139296 UMS-139296 Custom Finger 14
Sidel 153896 UMS-153896 Preform Holder Assembly With O-Ring 14
Sidel 154127 UMS-154127 Custum Finger 14
Sidel 010268379 UMS-268379 Improved End piece 13
Sidel 010600905 UMS-653189 Pivot 8
Sidel 010621988 UMS-621988 Stroke Pin - Locking GUPM 9
Sidel 010622920 UMS-667017 Shaft - Locking GUPM 9
Sidel 010622921 UMS-622921 Roller Support - Locking GUPM 9
Sidel 010622922 UMS-622922 Finger - Locking GUPM 9
Sidel 010624600 UMS-624600 Stop - Locking GUPM 9
Sidel 010624804 UMS-624804 Skid - Locking GUPM 9
Sidel 010631557 UMS-631557 Improved Shaft 8
Sidel 010647514 UMS-647514 Improved Stretch Rod Clamp Yoke 18
Sidel 010647514 UMS-647514R Refurb + Imp Stretch Rod Clamp Yoke With Harden parts 18
Sidel 010653189 UMS-653189 Pivot 8
Sidel 010655795 UMS-655795R Refurbish Linear spindle chain Rebuilt quick change 8
Sidel 010658006 UMS-658006R Refurbish Linear spindle chain Rebuilt non-quick change 8
Sidel 010656316 UMS-656316 Finger - Locking GUPM 9
Sidel -- UMS-659467 Custom Ejector 14
Sidel 010667017 UMS-667017 Improved 2nd Station Piston 9
Sidel 010682702 UMS-682702 Improved Stretch Rod Clamp Harden parts 18
Sidel 010687645 UMS-687645 Improved Base Plate 8
Sidel 010694716 UMS-694716 Improved Stretch rod clamp (cold set) 11
Sidel 010714199 UMS-714199 Improved Base Plate 8
Sidel 010715527 UMS-715527 Bearing ring 25x30x10 19
Sidel 010715528 UMS-715528 Stroke Pin - Locking 20
Sidel 010715542 UMS-715542 Bearing ring 25x30x20 19
Sidel 010723367 UMS-723367 Improved Retainer Plate 11
Sidel 010725134 UMS-725134 Nozzle Cap 13
Sidel 010727456 UMS-210601 Improved Bell Improvement (Reinforces seat)75 mm 15
Sidel 010727456 UMS-210601R Refurb + Imp Bell rebuilt Improvement (Reinforces seat)75 mm 15
Sidel 010727457 UMS-727457 Improved End piece 13
Sidel 010727458 UMS-727458 Tube spacer 11
Sidel 010727460 UMS-727460 S2 Diffusor dia. 14mm 11
Sidel 010727467 UMS-727467 Improved Cylinder 12
Sidel 010727469 UMS-727469M Improved Washer 13
Sidel 010727970 UMS-727970 Improved Retainer Plate 11
Sidel 010729281 UMS-729281 Improved Stretch rod clamp (heat set) 11
Sidel 010733113 UMS-733113 Improved S2 Dual retainer plate top 18
Rev. : VDF21012010 68
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
Numéro
Machine OEM Numéro UM Improved Custom Description Page
Sidel 010734326 UMS-734326 Compensation bolt 13
Sidel 010739241 UMS-739241 Improved S2 Dual retainer plate bottom 18
Sidel 010742006 UMS-742006 Tube spacer long 11
Sidel 010742007 UMS-742007M Improved Cylinder neck height 12
Sidel 010744524 UMS-744524M Improved End piece 12
Sidel 010744553 UMS-744553M Improved End piece 12
Sidel 010745938 UMS-745938 Compensation Cup 11
Sidel 010745985 UMS-745985M Improved Cylinder neck height 12
Sidel 010746089 UMS-746089 Tube spacer 11
Sidel 010746095 UMS-746095 Improved S2+ Cylinder 17
Sidel 010746128 UMS-746128M Improved End piece 13
Sidel 010746615 UMS-746615 Improved Bell Improvement (Reinforces seat)80 mm 15
Sidel 010746615 UMS-746615R Refurb + Imp Bell rebuilt Improvement (Reinforces seat)80 mm 15
Sidel 010746710 UMS-746710M Ring 13
Sidel 010747728 UMS-747728M Improved Custom Cylinder neck height 12
Sidel 010953898 UMS-953898 Improved Ejector 18
Sidel 011139915 UMS-139915 Custom Finger gripper 26mm Infeed 14
Sidel 011139924 UMS-139924 Custom Finger gripper 26mm Outfeed 14
Sidel 011210601 UMS-210601 Improved Bell Improvement (Reinforces seat)75 mm 15
Sidel 011210601 UMS-210601R Refurb + Imp Bell rebuilt Improvement (Reinforces seat)75 mm 15
Sidel 011224646 UMS-224646M Refurb + Imp Blow Valve Assy rebuilt 16
Sidel 011224647 UMS-224647M Refurb + Imp Pre-blow Valve Assy rebuilt 16
Sidel 011224648 UMS-224648M Refurb + Imp Exhaust valve Assy rebuilt 16
Sidel 011226565 UMS-226565M Refurb + Imp Recovery Valve Assy rebuilt 16
Sidel 011242949 UMS-242949 Improved Retainer plate top 19
Sidel 011286310 UMS-286310 Improved Retainer plate bottom 19
Sidel 011286573 UMS-286573 Improved Stretch rod housing 19
Sidel 011319435 UMS-319435 Finger - Locking 20
Sidel 011319436 UMS-319436 Finger - Locking 20
Sidel 1002131803 UMS-1002131803 Refurbish SB020 Water Rotary Union Refurbish 12
Sidel 1123429701 UMS-01123429701 Refurb + Imp S2 Compensation valve REBUILD 10
Sidel 7472800142 UMS-7472800142 Refurbish Stretching cylinder rebuilt 14
Sidel 10067763101 UMS-677631 Assy with bushings 18
Sidel 4253250802 UMS-4253250802 Membrane 51
Sidel 99000016461 UMS-99000411427 Refurbish Air Rotary Union Refurbish 12
Sidel 99000069227 UMS-99000069227 Refurbish SBO16 & SBO24 Water Rotary Union Refurbish 8
Sidel 99000411427 UMS-99000411427 Refurbish Air Rotary Union Refurbish 12
Sidel -- 0002-079-01-34 Improved New Compensation Bar System – Low profile 8 & 15
Sidel -- 0002-079-01-41 Improved Replacement bumper kit 8 & 15
Sidel -- 0002-012-03-00 Refurbish Water Rotary Union Refurbish from SBO2 to SB010 8
Sidel -- -- Refurbish Shell Carrier Repair 9
Sidel -- 0002-079-07-00 Improved New Compensation Bar System Quick change – Low Profile 8 & 15
Sidel -- 0002-079-07-34 Improved Rubber kit – compensation system quick change 8 & 15
Sidel -- -- Refurb + Imp Blow & Exhaust valve body repair 10
Sidel -- 0002-001-01-48 Improved MAC pilot valve and adapter plate (red: exhaust) 10
Sidel -- 0002-001-01-47 Improved MAC pilot valve and adapter plate (blue: blow/pre-blow) 10
Sidel -- 0002-001-01-09 Improved Piston kit for Blow valve with improve solution 10
Sidel -- -- Refurb + Imp Compensation valve body repair 10
Sidel -- 0002-001-02-34 Spare parts kit for S2 compensation valve 10
Sidel -- 0002-079-05-13 Improved HEAT SET Compensation Bumper 11
Sidel -- 0002-079-01-45 Improved Compensation bolt long 13
Sidel -- 0002-079-01-46 Improved Compensation bolt short 13
Sidel -- -- Improved Custom Cylinder Neck height assembly 12
Sidel -- 0002-001-04-11 Improved MAC pilot valve and adapter plate (blue: air recovery) 16
Sidel -- 0002-001-04-10 Improved MAC pilot valve and adapter plate (red: Exhaust) 16
Sidel -- 0002-001-04-09 Improved MAC pilot valve and adapter plate (blue: blow/pre-blow) 16
Sidel -- 0002-001-03-09 Improved Piston kit for valve 16
Sidel -- 0002-001-04-12 Improved S2+ Seal Kit 16
Sidel -- 0002-001-05-04 Refurb + Imp Valve body repair 20
Sidel -- 0002-001-05-25 Improved Valve piston 20
Sidel -- 0002-005-01-23 Improved Custom S2+ cylinder assy 16
Sidel -- 0002-005-02-17 Improved Stretch rod assy 19
Sidel -- 0002-005-02-18 Improved Plunger 19
Sidel -- 0002-005-02-20 Improved Stretch rod clamp 19
Sidel -- 0002-005-02-16 Improved Stretch rod inner ring 19
Sidel -- 0002-005-02-13 Improved Stretch rod bottom plate 19
Sidel -- 0104-001-01-01 Improved Trolley assembly 51
Sidel -- 0104-001-01-03 Improved "C" Bracket 51
Sidel -- 0104-001-01-20 Improved Support Guide Tube Assy 51
Sidel -- 0104-001-01-32 Improved Bushing 51
Sidel -- 0104-001-01-21 Improved Centering Bushing 51
Rev. : VDF21012010 69
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
Numéro
Machine OEM Numéro UM Improved Custom Description Page
Sidel -- 0104-001-01-30 Improved Security Bracket 51
Sidel -- 0104-001-01-17 Spring 51
Sidel -- 0104-001-01-31 Improved Shock Absorber 51
Sidel 010746128SC UMS-746128SCM Improved End piece with Set-Screw 13
Sidel 134656M UMS-134656M Improved Custom Cylinder Neck height Assy 12
Sidel 8DCVG0003130 UMS-8DCVG0003130 Vent tube 52
Sidel 8DCVG0022670 UMS-8DCVG0022670 Cam wheel 52
Sidel 8DCVG0022670 UMS-8DCVG0022670M Improved Cam wheel improved 52
Sidel 8DCVG002610 UMS-8DCVG002610 Fork 52
Sidel 8DCVG002970 UMS-8DCVG002970 Improved Pin 52
Sidel -- -- Improved IMPROVE Blow Nozzle 8
Sidel DCVG002880 UMS-DCVG002880 Improved Shaft harden 25mm 51
Sidel LH 086549/114583 UMS-114583 Refurb + Imp S2 Blow Valve Assy 10
Sidel LH 086559/114585 UMS-114585 Refurb + Imp S2 Exhaust Valve Assy 10
Sidel -- -- Linear spindle chain Rebuilt 14
Sidel -- -- Vent tube 51
Sidel -- -- Vent tube diffusor 51
Sidel (ALSIM) -- -- Vent tube - seal 51
Simonazzi (Sasib) -- -- Blow Nozzle 52
Simonazzi (Sasib) -- 0251-001-01-00 Improved Trolley assembly Improvement solution 55
Simonazzi (Sasib) -- 0251-001-01-03 Improved Main bushing 55
Simonazzi (Sasib) -- 0251-001-01-04 Improved Security bracket 55
Simonazzi (Sasib) -- 0251-001-01-05 Improved Main block 57
Simonazzi (Sasib) -- 0251-001-01-06 Improved Bushing 55
Simonazzi (Sasib) -- 0251-001-01-07 Improved Round bottom plate 56
Simonazzi (Sasib) -- 0251-001-01-10 Improved Vent tube 57
Simonazzi (Sasib) -- 0251-001-01-12 Improved Spring support 56
Simonazzi (Sasib) -- 0251-001-01-13 Improved C-plate bottle gripper 56
Simonazzi (Sasib) -- 0251-001-01-15 Improved Side spring 55
Simonazzi (Sasib) -- 0251-001-01-16 Improved Locking ring 56
Simonazzi (Sasib) -- 0251-001-01-20 Improved Side shaft 57
Simonazzi (Sasib) -- 0251-001-01-22 Improved Inside spring 56
Simonazzi (Sasib) -- 0251-001-01-23 Improved Trolley 55
Simonazzi (Sasib) -- 0251-001-01-28 Improved Cam wheel 56
Simonazzi (Sasib) -- 0251-001-01-29 Improved Cam whell cover 56
Simonazzi (Sasib) -- 0251-001-01-30 Improved Cam wheel sealing Spacer 56
Simonazzi (Sasib) -- 0251-001-01-33 Improved Cam wheel locking flange 56
Simonazzi (Sasib) -- 0251-001-01-48 Improved Main shaft 57
Simonazzi (Sasib) -- 0251-001-01-51 Improved Locking device 55
Simonazzi (Sasib) 0269991294 UMS-0269991294 Basin catch safety 55
Simonazzi (Sasib) 0269991294 UMS-0269991294M Improved Basin catch safety improvement 55
Simonazzi (Sasib) -- SS 6003RS Cam wheel bearing 56
SIPA 5106141 UMSP-5106141R Improved Manifold Right 43
SIPA 5106141 UMSP-5106141L Improved Manifold Left 43
SIPA 5106474 UMSP-5106474R Improved Manifold Right 43
SIPA 5106474 UMSP-5106474L Improved Manifold Left 43
SIPA 5954576 UMSP-5954576 Gripper Holder Plate 44
SIPA 5954577 UMSP-5954577 Pivot Plate 44
SIPA 40004727 UMSP-40004727 Arm 44
SIPA 40005806 UMSP-40005806 Custom Finger Gripper Left 44
SIPA 40005807 UMSP-40005807 Custom Finger Gripper Right 44
SIPA 40343222 UMSP-40343222 Custom Finger Gripper Right 45
SIPA 40343225 UMSP-40343225 Custom Finger Gripper Left 45
SIPA 40344111 UMSP-40344111 Mold Seal 45
SIPA 2000294700 UMSP-2000294700 Oven spindle preform holder 44
SIPA 2000703800 UMSP-2000703800 Custom Collet 28mm PCO Assy 43
SIPA 3000189500 UMSP-3000189500 Custom Nose cone with oring Assy 43
SIPA 2010117200 PZ UMSP-2010117200 Custom Collet PCO Assy 43
SIPA PG101220F0 UMSP-PG101220F0 Canula bushing 45
SIPA -- -- Custom Collet PCO 38mm 42
SIPA -- -- Custom Collet PCO 26mm 42
SIPA -- 0077-009-01-09 Shoulder Large 44
SIPA -- 0077-009-01-08 Shoulder Small 44
SIPA -- 0077-009-01-10 Threaded Holder 44
SIPA -- 0077-009-01-06 Spring Small 44
SIPA -- 0077-009-01-07 Spring Large 45
SIPA -- 0077-011-01-00 Canula 45
SIPA -- 0077-011-01-03 Compression spring 45
Uniloy 25033 UMU-25033 End piece 49
Uniloy 2153-402 UMU-2153402 Cotter 49
Uniloy 2253-402 UMU-2253402 Retainer 49
Rev. : VDF21012010 70
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.
Toll free : 1-866-454-2493
Fax : (450) 454-2477
Numéro
Machine OEM Numéro UM Improved Custom Description Page
Uniloy 902-39-47 UMU-9023947 Air diffusor 49
Rev. : VDF21012010 71
*SIG, KRUPP and BLOMAX are trademarks of SIG Corpoplast GMbH & Co.K.G. SIDEL, SBO, LA GIRONDINE, ALSIM, SELECT, COMBI are trademarks of SIDEL Inc. ANDRE ZALKIN are
trademark of Ets. Andre Zalkin & cie. SIPA, SFR, ECS FX are trademarks of SIPA Plastic Packaging System S.p.A. Usinages Mallette Inc. (UM), is not a licensee of SIG Corpoplast GMbH & Co.K.G.
or Sidel Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon nor have UM parts been approved or authorized by SIG Corpoplast Co.K.G. or Sidel
Inc. or Ets. Andre Zalkin & cie. or SIPA Plastic Packaging System S.p.A. or Husky Inc. or Bellis & Morcon.