1) Soldering Iron
2) Soldering Lead
3) Plier
4) Cutter (normal plier look alike but has only cutting tip)
5) Pocket Knife
6) Black Tape
7) Room/space with sufficient lighting
Please note the polarity of the capacitors and LED. Leg at the
grey strip on capacitor body is the negative leg. As for LED,
shorter leg is the negative leg.
Please note the polarity of the capacitors and LED. Leg at the
grey strip on capacitor body is the negative leg. As for LED,
shorter leg is the negative leg.
Installation :
2) In-cabin 12v socket - Tap the + wire to the blue wire, and – wire to
the white wire. May also use car plug socket. Use
your creativity.
Copyright © 2008 Wandzul
www.peroduavivaclub.com
Sample pictures of constructed vs:
Figure 4: 4700uF (Blue) and 3300uF (Black) capacitors, note the grey strips
GOOD LUCK
HAPPY DIY-ing