7 Using the
agentDownload.linux Script.
Goal
This note is intended as a successful use case demonstration for comparison purposes by those trying to
upgrade the Enterprise Manager Grid Control 10.2.0.5.0 agent to 11.1.0.1.0 on Linux x86. This
demonstration may also represent the actions required and the display available for other similar
certified platforms.
The sequence of events during upgrade and the detailed prerequisites are summarized in the following
document, which should be considered the universal reference for Grid Control 11.1.0.1.0 installation:
Oracle® Enterprise Manager Grid Control Advanced Installation and Configuration Guide
Section titled: Prerequisites/ Table 13-1 Prerequisites for Installing Oracle Management Agent Using
agentDownload Script
The procedure described here may include alternative or different information (from the published
documentation) where it has been found helpful for the completion of the successful installation on the
specific platform and with the other specific conditions being used.
This same procedure with step-by-step screen shot graphics can be found here.
Solution
A) Prerequisites:
Prerequisites are extensively described in other documents. Listed below is a summary of where to go to
cover all of the prerequisites requirements.
1) See the following references for the detailed prerequisites associated with full installation of Grid
Control 11g using an existing database:
Oracle® Enterprise Manager Grid Control Advanced Installation and Configuration Guide
Section titled: Prerequisites/ Table 13-1 Prerequisites for Installing Oracle Management Agent Using
agentDownload Script
2) Environment requirements:
For the 11.1.0.1.0 Grid Control agent upgrade, the user environment should contain no references to
existing Oracle software locations, including TNS_ADMIN, ORACLE_HOME, ORACLE_SID, PATH, etc. All
environment settings will be created by the installer from the information provided in the installation
process.
3) Linux x86 OS Requirements
While most prerequisites are generic, certain OS characteristics are required of the Linux x86
distributions. These OS packages must be available for proper installation and operation of Grid Control
11.1.0.1.0 on OEL 4.7:
make-3.80
binutils-2.15.92.0.2
gcc-3.4.5
libstdc++-3.4.5
GLIBC-2.3.4-2.19
The agent only full product installer should be staged in the OMS directory structure here:
.../oms11g/sysman/agent_download/11.1.0.1.0/linux/
Under this directory should also be the agentDownload.linux script which should be transferred to the
target host for execution.
1) The 11.1.0.1.0 Grid Control view should show the discovered 10.2.0.5.0 agent with status UP (green
arrow) and confirm its version as 10.2.0.5 on the Management Agents summary page .
2) The status response shows the versions of the interacting components:
10.2.0.5.0 agent
11.1.0.1.0 OMS
It also identifies the interacting URLs for agent/OMS communication and the agent Oracle Home
directory.
3) Obtaining the agentDownload.linux script.
https://<OMS_host>:<upload _port>/agent_download.11.1.0.1.0/linux
The agentDownload.linux script will be available for transfer through http, if desired.
Where:
-u is for upgrade
The agentDownload script execution is followed in the command session and will stop to ask for the
agent registration password.
Oracle strongly recommends that only secure agents are used in enterprise monitoring.
3) Installation Progress
The installer will show a detail of the progress in the command session of the installer.
4) End of Installation Message
The command session will eventually request that the root.sh script is run by root prior to configuring
the agent .
D) Post-upgrade Checks
Once the agent configuration is complete, a status should be taken with the 11.1.0.1.0 agent, since the
10.2.0.5.0 agent has been disabled.
- The same URLs as were reported from the 10.2.0.5.0 agent status before upgrade
- Data upload should be successful and the status output should show no backlog or that a backlog is
dropping with time.
2) Agent View from Grid Control Post-Upgrade
The Management Agents summary in Grid Control will show the new agent version.