Power MOSFET
20 V, 285 mA, N−Channel with ESD
Protection, SOT−723
Features
• Enables High Density PCB Manufacturing http://onsemi.com
• 44% Smaller Footprint than SC−89 and 38% Thinner than SC−89
• Low Voltage Drive Makes this Device Ideal for Portable Equipment
V(BR)DSS RDS(on) TYP ID Max
1.5 W @ 4.5 V
• Low Threshold Levels, VGS(TH) < 1.3 V
• Low Profile (< 0.5 mm) Allows It to Fit Easily into Extremely Thin 2.4 W @ 2.5 V
20 V 285 mA
Environments such as Portable Electronics 5.1 W @ 1.8 V
• Operated at Standard Logic Level Gate Drive, Facilitating Future 6.8 W @ 1.65 V
Migration to Lower Levels Using the Same Basic Topology
• These are Pb−Free Devices Top View
Applications
3
• Interfacing, Switching
• High Speed Switching
• Cellular Phones, PDAs
KA
Current (Note 2) mA
Steady TA = 85°C 155 SOT−723
State CASE 631AA 1
Power Dissipation TA = 25°C PD 310
mW
(Note 2)
KA = Device Code
Pulsed Drain Current tp = 10 ms IDM 400 mA M = Date Code
Operating Junction and Storage Temperature TJ, TSTG −55 to °C
150
ORDERING INFORMATION
Source Current (Body Diode) (Note 2) IS 286 mA
Lead Temperature for Soldering Purposes 260 °C Device Package Shipping †
TL
(1/8” from case for 10 seconds)
NTK3043NT1G SOT−723* 4000 / Tape & Reel
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended NTK3043NT5G SOT−723* 8000 / Tape & Reel
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability. †For information on tape and reel specifications,
1. Surface−mounted on FR4 board using 1 in sq pad size including part orientation and tape sizes, please
(Cu area = 1.127 in sq [1 oz] including traces) refer to our Tape and Reel Packaging Specification
2. Surface−mounted on FR4 board using the minimum recommended pad size. Brochure, BRD8011/D.
*These packages are inherently Pb−Free.
http://onsemi.com
2
NTK3043N
0.3 0.3
VDS ≥ 5 V
2.5 V
VGS = 3 V to 10 V
TJ = 25°C
0.2 0.2
2.2 V
2.0 V
0.1 0.1 TJ = 125°C
1.8 V
TJ = 25°C
1.6 V
1.4 V TJ = −55°C
0 0
0 1 2 3 4 5 1 1.5 2 2.5
VDS, DRAIN−TO−SOURCE VOLTAGE (VOLTS) VGS, GATE−TO−SOURCE VOLTAGE (VOLTS)
5 6
ID = 0.255 A TJ = 25°C
TJ = 25°C
4 5
3 4
VGS = 2.5 V
2 3
1 2
VGS = 4.5 V
0 1
1 2 3 4 5 6 7 8 9 10 0 0.1 0.2 0.3
VGS, GATE−TO−SOURCE VOLTAGE (VOLTS) ID, DRAIN CURRENT (AMPS)
Figure 3. On−Resistance vs. Gate−to−Source Figure 4. On−Resistance vs. Drain Current and
Voltage Gate Voltage
9.0 1000
VGS = 0 V
8.0
RDS(on), DRAIN−TO−SOURCE
VGS = 1.65 V, ID = 1 mA
7.0
IDSS, LEAKAGE (nA)
6.0 100
RESISTANCE
4.0
VGS = 2.5 V, ID = 10 mA TJ = 125°C
3.0 10
2.0
VGS = 4.5 V, ID = 10 mA
1.0
0 1
−50 −25 0 25 50 75 100 125 150 5 10 15 20
TJ, JUNCTION TEMPERATURE (°C) VDS, DRAIN−TO−SOURCE VOLTAGE (VOLTS)
http://onsemi.com
3
NTK3043N
25 1000
Ciss TJ = 25°C VDD = 5 V
ID = 10 mA
20 VGS = 4.5 V
C, CAPACITANCE (pF)
Crss
100 td(off)
t, TIME (ns)
15 tf
Ciss
10 tr
Coss 10 td(on)
0.4
VGS = 0 V
IS, SOURCE CURRENT (AMPS)
TJ = 25°C
0.3
0.2
0.1
TJ = 150°C
TJ = 125°C
TJ = −55°C
0
0.4 0.5 0.6 0.7 0.8 0.9 1.0
VSD, SOURCE−TO−DRAIN VOLTAGE (VOLTS)
http://onsemi.com
4
NTK3043N
PACKAGE DIMENSIONS
SOT−723
CASE 631AA−01
ISSUE B
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETERS.
−X− 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD
D FINISH. MINIMUM LEAD THICKNESS IS THE MINIMUM
A THICKNESS OF BASE MATERIAL.
b1 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD
−Y− FLASH, PROTRUSIONS OR GATE BURRS.
3
E L HE MILLIMETERS INCHES
1 2 DIM MIN NOM MAX MIN NOM MAX
A 0.45 0.50 0.55 0.018 0.020 0.022
b 2X C b 0.15 0.21 0.27 0.0059 0.0083 0.0106
e b1 0.25 0.31 0.37 0.010 0.012 0.015
0.08 (0.0032) X Y C 0.07 0.12 0.17 0.0028 0.0047 0.0067
D 1.15 1.20 1.25 0.045 0.047 0.049
E 0.75 0.80 0.85 0.03 0.032 0.034
e 0.40 BSC 0.016 BSC
HE 1.15 1.20 1.25 0.045 0.047 0.049
L 0.15 0.20 0.25 0.0059 0.0079 0.0098
SOLDERING FOOTPRINT*
0.40
0.0157
0.40
0.0157
1.0
0.039
0.40
0.0157
0.40 0.40
0.0157 0.0157
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
http://onsemi.com NTK3043N/D
5