0 penilaian0% menganggap dokumen ini bermanfaat (0 suara)
85 tayangan4 halaman
CIPET has been awarded with ISO 9001 QMS for its training and technical services. CAD / CAM / CAE is only area where engineers and technocrats have immense tools to make efficient and effective designs for the industry. About 750 engineers are trained every year. The Engineers are well accepted in the industries and R&D centres.
CIPET has been awarded with ISO 9001 QMS for its training and technical services. CAD / CAM / CAE is only area where engineers and technocrats have immense tools to make efficient and effective designs for the industry. About 750 engineers are trained every year. The Engineers are well accepted in the industries and R&D centres.
Hak Cipta:
Attribution Non-Commercial (BY-NC)
Format Tersedia
Unduh sebagai PDF, TXT atau baca online dari Scribd
CIPET has been awarded with ISO 9001 QMS for its training and technical services. CAD / CAM / CAE is only area where engineers and technocrats have immense tools to make efficient and effective designs for the industry. About 750 engineers are trained every year. The Engineers are well accepted in the industries and R&D centres.
Hak Cipta:
Attribution Non-Commercial (BY-NC)
Format Tersedia
Unduh sebagai PDF, TXT atau baca online dari Scribd
CENTRAL INSTITUTE OF PLASTICS ENGINEERING & TECHNOLOGY
Guindy, Chennai - 600 032. Ph. : 044 - 22254701 - 706, 709 Fax : 044 - 2225 4707 Email : cipetchn@eth.net ABOUT CIPET parts, Creating features, Advance features, Feature CIPET is an autonomous institute under the Department of Chemicals & operations, Construction operations, Surface Petrochemicals, Ministry of Chemicals & Fertilizers, Govt. of India established techniques, Bin and Library Management in 1968 and fully devoted to the service of industries for more than three Assembly : Top Down and Bottom Up, Sequencing & animation, decades. CIPET has been awarded with ISO 9001 QMS for its training and Patterning, Exploded Views, Introduction to Mechanism technical services. design. CIPET CAD/CAM/CAE Centre Chennai was established under the World Drafting : Associative and Non-associative Dimensioning, Views Bank project in the year 1989. The demand for shorter lead times and and Dimensions, Utility Symbols, Bill of Material improved productivity has fuelled the quest for new generation engineers with enriched knowledge on latest design and manufacturing techniques. 2. CAD/CAM PROGRAMMES CAD/CAM/CAE is only area where engineers and technocrats have immense 2.1 CAD/CAM USING UNIGRAPHICS tools at their disposal to make efficient and effective designs for the industry. CAD/CAM/CAE center is already catering the needs of not only Plastics Version: NX 5.0 Fee: Rs 18,000/- Duration: 200 hrs Industries but also other allied industries through Manpower training, Modeling : Introduction, Sketch, Curve, Curve Operations, Form Consultancy, Development of Tools etc. Passed out candidates from this Feature, Feature Operation, Transform. centre are well recognized by the leading industries, multi-national Assembly : Assembly of Components, Exploded Views, companies, working in the area of software development, product Sequencing, Context Control and Cloning and development, mould design, analysis etc. & are well placed in India but also in Component arrays editing, Top Down Assembly. South East Asia, Canada, Australia and Middle East. Drafting : Drawing sheets, Views, Dimensioning, Annotations, CIPET CAD/CAM/CAE Centre Chennai was prominently known among the Symbols, Tabular note and Part list. students and the industries. We are conducting about 25 different programs to cater the need of the different segments of the industry round the clock. About Direct Modeling 750 Engineers are trained every year. The Engineers are well accepted in the Free form feature : Sheets from points, Making sheets from variable cross industries and R&D centres. sections, Bridging, Offsetting, Filleting & Trimming sheets Sheet Metal feature: Tab, Flange, Break corner, closed corner, Normal cutout, 1. CAD PROGRAMMES Jog, Bend, Dimple, Bead, Unbend, Rebend, Edge rib, 1.1 CAD USING UNIGRAPHICS flat solid. Version: NX 5.0 Fee: Rs 10,000/- Duration: 100 hrs Manufacturing : Model Creation, Tool Selection, Geometry Definition, Machining Methods, Planer Milling and Contour milling Modeling : Introduction, Sketch, Curve, Curve Operations, Form Operations and Post Processing. Feature, Feature Operation, Transform. Assembly : Assembly of Components, Exploded Views, 2.2 CAD/CAM USING PRO/E Sequencing, Context Control, Cloning and Component Version: Wildfire 3.0 Fee: Rs 18,000/- Duration: 200 hrs arrays editing, Top Down Assembly. Drafting : Drawing sheets, Views, Dimensioning, Annotations, Part Modeling : Introduction, Sketch, Base features, datum features, Symbols, Tabular note and Part list. sections in sketch based features, Edit feature, Engineering features, Construction features, Advanced 1.2 CAD USING PRO/E features, Tweak feature, UDFs & Group, Relation & Version: Wildfire 3.0 Fee: Rs 10,000/- Duration: 100 hrs family Table, Resolving feature failures Pro/Assembly : Creating Assemblies, placing, patterning, packaging, Part Modeling : Introduction, Sketch, Base features, datum features, freeform Manipulation of components, Top Down sections in sketch based features, Edit feature, Assemblies, Exploded view. engineering features, construction features, advanced features, tweak feature, UDFs & Group, Relation & Pro/Detail : Drafting basics, creating a Drawing with Model views, family Table, Resolving feature failures Dimensioning & Detailing, Tables & BOM Balloons Pro/Assembly : Creating Assemblies, placing, pattering, packaging, Pro/Surface : Creating a Surface Feature, Trimming Quilts, Flattening freeform Manipulation of components, Top Down & Bending, Creating Solid Geometry Using Quilt, Assemblies, Exploded view. Freeform Surfaces, Boundary, Conic surface and N- sided patch, style tools Pro/Detail : Drafting basics, creating a Drawing with Model views, Dimensioning & Detailing, Tables & BOM Balloons Pro/ Sheetmetal : Introduction creates conversion, wall, rip, cut, form, flatten form, notch punch, and bend, unbend, bend back, 1.3 CAD USING CATIA corner relief, deform, edge bend. Version: V5 R17 Fee: Rs 10,000/- Duration: 100 hrs Pro/Mold design : Introduction, Reference & work pieces, Mold Parting 3 D Part Modeling : Introduction to GUI, Sketcher, Constraints, sketch- surfaces, Mold volumes, Extracting Mold components, based features, Dress up features, Transformation split components. features, Associating bodies with Boolean Operations, Pro/NC : Manufacturing Process & Parameters, Tooling, NC Reference Elements, Modifying Features. sequence-Milling & Lathe-turning, CL Data, NC Assembly Design : Creating assembly, Manipulating components in sequence Definition, Creation of CL Data File, NC Post assembly, Assembly constraints, Exploded view, Clash Processing. checking, Assembly features, Scene creation, Using 2.3 CAD/CAM USING CATIA Mechanical Standard parts, Top Down Assembly. Version: V5 R17 Fee: Rs 18,000/- Duration: 200 hrs Drafting : Generative Drafting, Interactive Drafting, Creating Views, Sections, BOM Generation. Part Modeling : Introduction to GUI, Sketcher, Constraints, sketch- based features, Dress up features, Transformation 1.4 CAD USING I-DEAS features, Associating bodies with Boolean Operations, Version: NX5 Fee: Rs 10,000/- Duration: 100 hrs Reference Elements, Modifying Features. 3D Modeling : Sketching, Constraining, Catalogs and Parameterized Assembly Design : Creating assembly, Manipulating components in assembly, Assembly constraints, Exploded view, Clash ANSYS Workbench: Simulation, CFX Mesh, Engineering Data sheet and FE checking, Assembly features, Scene creation, Using modeler. Mechanical Standard parts, Top Down Assembly. Report generation. Drafting : Generative Drafting, Interactive Drafting, Creating 3.3 CAE USING LS-DYNA Views, Sections, BOM Generation. Version: 970 Fees: Rs. 15,000/- Duration: 100 hrs Surface Design : Wire frame geometry creation, Basic surface, Operations on surface, advanced surface, Surface Theory : Introduction to basic concepts of FEA, Contact based features in Part design. Analysis, Linear and Non-Linear analysis. Sheet metal : Introduction, Sheet Metal Parameters, Creating the FEA Terminologies used in LS-Dyna: ALE, SPH. Side Walls, Cutout, Automatic Bends. Analysis : Larger Deflection Dynamics, Crash Analysis, Mold Design : Core cavity separation, Basic mold design. Occupant Safety, Impact Analysis and Failure Manufacturing : Basic Tasks, Part operations, Programs & Processes, Analysis. Managing Manufacturing Entities, Verification, Post Processing-using Hyperview. Simulation and NC Code generation. Prerequisite: knowledge of FEA and Hypermesh 8.0. 2.4 CAD/CAM USING I-DEAS 3.4 CAE USING MOLDFLOW Version: NX5 Fee: Rs 18,000/- Duration: 200 hrs Version: 6.0 Fees: Rs 15,000/- Duration: 120 hrs 3D Modeling : Sketching, Constraining, Catalogs and Parameterized Introduction to CAE: Basics of Plastics Product Design, Moldflow Modeling, parts, Creating features, Advance features, Feature Mesh Creation, Mesh Checking, Surface repair tools, operations, Construction operations, Surface Creating Feed system and cooling system. techniques, Bin and Library Management Meshing Tools : create Node, curves, regions, move/copy, nodal mesh Assembly : Top Down and Bottom Up, Sequencing & animation, tools, edge mesh tools & check mesh diagnostics Patterning, Exploded Views, Introduction to Mechanism Modules : Mid plane, Fusion and 3D Solid. designs. Analysis : Gate location, Fill, Flow, Cool, Pack, Warp, Shrinkage, Drafting : Associative and Non-associative Dimensioning, Views molding window, Case Study. and Dimensions, Utility Symbols, Bill of Material Pre-requisite : Plastics & Mold knowledge. Simulation : Basics & General Analysis procedure, Free and mapped meshing, Quality check, linear, non-linear and 3.5 CAE USING PRO-MECHANICA variational analysis Version: Wildfire 3.0 Fees: Rs 15,000/- Duration:160 hrs Manufacturing : Model Creation, Operation and Tool Selection, Syllabus of CAD Using Pro/E Plus Pro/Mechanica Generation CL File, Post Processing. Basic Mechanica : Static Structural Analysis, Modal Analysis, Buckling and Steady state Thermal. 3.CAE PROGRAMMES Advanced Mechanica: Vibrational Analysis, Dynamic and Time involving 3.1 CAE USING HYPERWORKS Analysis. Version: 8.0 Fee: Rs 15,000/- Duration: 160 hrs Post-Processing Using Pro/E. Hypermesh : Basic modeling, Geometry cleanup, Organizing the 4.MOLD PROGRAMMES model with collectors, Extracting mid surfaces & 4.1 UNIGRAPHICS MOLD WIZARD simplifying, Selecting the user Profiles, Project, Numbering, Mask, Normals, Interactive surface Version: NX 5.0 Fees: Rs 10,000/- Duration: 80 hrs meshing, Element density, Algorithms, Checking Refreshing the part modeling, assembly and drafting. element quality. Introduction to solid meshing: Solid panels, Drag, spin, Line drag, element offset, linear Mold wizard : Loading Product, Family Mould, Shrinkage, Work piece, solid. Layout, Mould Tools, Parting, Mould Base, Standard Parts, Slider lifter, Ejector pin, Runner, Gate, Cooling, Optistruct : Linear Static Analysis, Thermal Analysis, Modal Insert, Electrode, Mold trim, Bill of material, Mould Analysis, Harmonic Analysis, Inertia Relief Analysis. Drawing. Optimization : Topology, optimization for solid problems, Optimization Prerequisite : Unigraphics & Mold Design Knowledge for stress problems. 4.2 CAD USING UNIGRAPHICS WITH MOLD WIZARD Hypermorph : morph volumes, Morph to geometry, freehand morph, morph options Version: NX 5.0 Fees: Rs 15,000/- Duration:160 hrs Hypergraph, hyperview, Batch mesher. Syllabus of CAD Using Unigraphics Mold wizard : Loading Product, Family Mould, Shrinkage, Work piece, 3.2 CAE USING ANSYS Layout, Mould Tools, Parting, Mould Base, Standard Parts, Slider lifter, Ejector pin, Runner, Gate, Cooling, Version: 11.0 Fee: Rs 15,000/- Duration: 160 hrs Insert, Electrode, Mold trim, Bill of material, Mould Introduction to FEA & ANSYS: GUI, Basics & general analysis procedure. Drawing. Modeling : Creating Solid model, Finite element modeling and Prerequisite : Mold Design Knowledge. importing models, Select Entities and Component 4.3 CAD/CAM USING UNIGRAPHICS WITH MOLD WIZARD manager. Version: NX 5.0 Fees: Rs 24,000/- Duration: 260 hrs Meshing : Quad and Tetrahedron mesh, Volumes, Areas, Line meshing. Free and mapped meshing, check mesh. Syllabus of CAD/CAM Using Unigraphics Structural Analysis: Static, Modal, Harmonic, Spectrum, p-method, Mold wizard : Loading Product, Family Mould, Shrinkage, Work piece, Nonlinear & Transient analysis. Layout, Mould Tools, Parting, Mould Base, Standard Thermal Analysis : Steady state thermal analysis. Parts, Slider lifter, Ejector pin, Runner, Gate, Cooling, Insert, Electrode, Mold trim, Bill of material, Mould Assembly Design : Creating assembly, Manipulating components in Drawing. assembly, Assembly constraints, Exploded view, Clash Prerequisite : Mold Design Knowledge. checking, Assembly features, Scene creation, Using Mechanical Standard parts, Top Down Assembly. 4.4 PRO/MOLD Drafting : Generative Drafting, Interactive Drafting, Creating Version: Wildfire 3.0 Fees: Rs 10,000/- Duration: 80 hrs Views, Sections, and BOM Generation. Refreshing the part modeling, assembly and drafting. Surface Design : Wire frame geometry creation, Basic surface, Operations on surface, advanced surface, Surface Pro/Moldesign : Introduction, Mold design sequence, Reference & work based features in Part design. pieces, Draft Checking, Applying Shrinkage, Creation Of Parting Surface, Splitting to Volume, Runner & Sheet metal : Introduction, Sheet Metal Parameters, Creating the Side Waterlines, Molding, Mold Opening Process, Mold Walls, Cutout, Automatic Bends. Layout, Injection Molding Machine, Catalogs. Mold Design : Core cavity separation, Basic mold design. Prerequisite : Pro/E & Mold Design Knowledge. Reverse Engineering: Basics concept, theoretical method of reverse 4.5 CAD USING PRO/E WITH PROMOLD engineering, Training on conventional measuring method, training on CMM, digitized shape editor, Version: Wildfire 3.0 Fees: Rs 15,000/- Duration: 160 hrs generative shape design, Quick surface reconstruction, Syllabus of CAD Using Pro-E free style, and project work. Pro/Mold : Introduction, Mold design sequence, Reference & work Concession in Course Fee# pieces, Draft Checking, Applying Shrinkage, Creation Of SC/ST/BC/MBC/Physically Challenged - 10% Parting Surface, Splitting to Volume, Runner & Waterlines, Molding, Mold Opening Process, Mold Fresh Diploma Holders / Engineers - 10% Layout, Injection Molding Machine, Catalogs Women - 15% Prerequisite : Mold Design Knowledge. Students (Colleges/Polytechnics) & Alumni of CIPET - 20% 4.6 CAD/CAM USING PRO/E WITH PROMOLD Night Batch (All candidates) -(10:00 PM to 6:00 AM) - 25% Version: Wildfire 3.0 Fees: Rs 24,000/- Duration:260 hrs CIPET Students/Trainees (LTC) - 50% # conditions apply Syllabus of CAD/CAM Using Pro-E 6.2 Masters Programme in Product Development with CAD/CAM/CAE Pro/Mold : Introduction, Mold design sequence, Reference & work pieces, Draft Checking, Applying Shrinkage, Creation Of Fee: Rs.75000/- Duration: 4Months Parting Surface, Splitting to Volume, Runner & Module I (Any THREE software) : Pro-E with Promold/UG with Mold Waterlines, Molding, Mold Opening Process, Mold Wizard/CATIA with Mold/I-DEAS Layout, Injection Molding Machine, Catalogs Module II (Any ONE software) : Ansys/Hyperworks/LS-Dyna Prerequisite : Mold Design Knowledge. /Moldflow 5. MULTI software PROGRAMMES: Module III : Project Work Any two CAD/CAM/CAE software programmes- Direct 20 % Concession. Module IV (Theory Classes) : Plastics Product & Mould Design, No other concession. Jigs&Fixtures, Sheet Metal, CNC, CBT, Rapid From the above mentioned various programmes, one is opting for any two Prototyping and Reverse Engineering. software programmes may avail 20% concession from the total course fee. Course Highlights: *Latest Software * Balanced Theory & Practical Classes For example : CAD/CAM using Unigraphics. Fee : Rs.18000/- Duration : *Product Development Concepts * Personality Development Programme 200 hrs *PLACEMENT ASSISTANCE * Certificate awarded by CIPET. & Eligibility: Degree/Diploma in Mechanical/Production/Polymer/Auto mobile/Aeronautical/Tool engineering/equivalent candidates aspiring to start CAE using Mold Flow. Fee: Rs. 15000/- Duration : 120 hrs the career in R&D and product development. ( Final course fee after 20% concession is Rs. 26400/- Duration : Selection: Eligible candidates have to appear in the interview for final 320 hrs) selection. 6. SPECIAL PROGRAMMES 6.3 Advanced Masters Programme in CAD/CAM/CAE 6.1 CAD/CAM USING CATIA WITH REVERSE ENGINEERING [Stipend (for top 15 candidates per batch): Rs. 5000/- per month during the Version: V5 R17 Fee: Rs 24000 /- Duration:260 hrs programme] Part Modeling : Introduction to GUI, Sketcher, Constraints, sketch- Fee : Rs. 90,000/- based features, Dress up features, Transformation Eligibility, Course Contents, Selection Process & Course Highlights: As features, Associating bodies with Boolean Operations, stated in 6.2 Reference Elements, Modifying Features. Interview venue : CIPET, Chennai ** Conditions apply.