2009/2010
Our commitment to excellence has resulted in Davis Lighting being awarded many prestigious
lighting contracts throughout the world. The team of experienced lighting designers and engineers
are able to work with an exciting range of products catering for a wide diversity of needs. This
includes residential, commercial, government, education, healthcare, industrial, recreational,
hospitality and retail.
By listening to your needs, our marketing and design teams will be able to analyse them and
develop an individual lighting solution that is both practical and in tune with business, because -
“When Your Business Depends On Light, You Can Depend On Davis”.
FOR OUR ENVIRONMENT
Demand for energy is rising at an ever increasing rate and simply building
more generation capacity is not the answer.
Davis Lighting’s philosophy is simply to offer easy and cost effective ways for the average
customer to make a difference to the environment.
Davis Lighting is a company that is both committed and able to deliver the best solutions for
energy efficient lighting to all its partners. Its team of dedicated professionals utilise state of the art
technologies in continually developing and expanding its ECOSmart range of lighting products.
This not only delivers significant cost savings related to the reduction in energy consumed but also
delivers even more significant benefits to our environment.
This means that Davis Lighting ECOSmart customers will contribute to a better planet by reducing
carbon emission and help to combat climate change.
We all need to take action to reduce greenhouse gas emissions. Becoming more energy efficient
is an important step and Davis Lighting is there to assist you in taking those steps and making the
change. So support Davis Lighting ECOSmart products. This will improve your environment and
maintain it for your children along with future generations.
Energy Efficiency Index (EEI) Classification
* The values given in class A1 refer to the maximum total input power at a dimming level of 25% ie. 50% of the A3 class of the same lamp.
Only high-performance A1 electronic ballasts are dimmable. Additionally, these ballasts unless actually dimmed, are only as energy
efficient as low-performance A3 ballasts.
Example :
ME2U228T5M - A 2 2 T P 1 8 4
1 - Instant start
2 - Pre-heat (warm start)
3 - Analogue dimmable (1-20V)
4 - Digital dimmable (DSI) -
Tridonic Atco digital dimming
5 - DALI dimmable
H - High power factor
L1 - Low power factor
L2 - Low power factor, RIS capacitor fitted
7
ORDERING CODE REFERENCES
HID PRODUCT
HB400MH - C H I G 2 R 1 P 1 C O
8
BATTENS
Application example
SLIMLINE BATTEN
This multi-purpose slim body range of
luminaires can be mounted direct to ceilings
or walls, or suspended by chain or conduit.
90º turn twist knobs allow the gear tray cover
to be easily removed without
the need for tools. This range
has a wide variety of add-on
accessories including square,
round & oval diffusers in
optional patterns, wire guards
and reflectors. The bare tube
models can be mounted
end-to-end.
9
T8 (26mm diameter) fluorescent lamp G13 lamp cap
BATTENS
SLIMLINE BATTEN continued
SLIMLINE BATTENS
Round Diffused Batten Round Diffused Batten
Single tube with opal diffuser Twin tube with opal diffuser
SLIMLINE BATTENS
Vanity Oval Diffused Batten Vanity Oval Diffused Batten
Single tube with switch & shower screen pattern Single tube with switch & reeded pattern
acrylic diffuser acrylic diffuser
LENGHT:
18W 615mm
36W 1225mm
SLIMLINE BATTENS
Reflected Batten Reflected Batten
Single tube with white powder coated metal reflector
SLIMLINE BATTENS
patterns, wire guards and reflectors can be added during or after installation of the bare tube (LP)
models.
16
BATTENS
SLIMLINE BATTEN ACCESSORIES continued
SLIMLINE BATTENS
17
T8 (26mm diameter) fluorescent lamp G13 lamp cap
BATTENS
SLIMLINE BATTEN ACCESSORIES continued
SLIMLINE BATTENS
Square Diffuser Kit Square Diffuser Kit
Reeded acrylic for single tube LP series Reeded acrylic for twin tube LP series
18
SLIMLINE BATTEN ACCESSORIES continued
SLIMLINE BATTENS
19
T8 (26mm diameter) fluorescent lamp G13 lamp cap
BATTENS
Application example
SLIMLINE ALUMINIUM BATTEN
(ALP) SERIES
20
T8 (26mm diameter) fluorescent lamp G13 lamp cap
SLIMLINE ALUMINIUM BATTEN (ALP) SERIES continued
SLIMLINE ALUMINIUM BATTENS
21
T8 (26mm diameter) fluorescent lamp G13 lamp cap
SLIMLINE ALUMINIUM BATTEN (ALP) ACCESSORIES
This range of optional add-on accessories can be added during or after installation of the bure tube
22
SLIMLINE ALUMINIUM BATTEN (ALP) ACCESSORIES continued
SLIMLINE ALUMINIUM BATTENS
23
Application example
TRIANGLE BATTENS
mounted luminaire, suitable
for end-to-end mounting. It is
available with white powder
coated, or high grade silver
mirror sides. The clip-on gear
tray provides easy maintenance.
142 142
70
85
142 142
70
85
24
T8 (26mm diameter) fluorescent lamp G13 lamp cap
BATTENS
Application example
ELARA BATTEN (T5)
The Elara is a low profile range of energy
ELARA BATTENS
Bare Batten
Single Tube
37 1/14w 575mm
EL114T5
EL121T5 1/21w 875mm
EL124T5 1/24w 575mm
69
Bare Batten
25
T5 (16mm diameter) fluorescent lamp G5 lamp cap
ELARA BATTEN (T5) continued
ELARA BATTENS
Diffused Batten
78
ELD128T5 1/28w 1175mm
ELD139T5 1/39w 875mm
ELD154T5 1/54w 1175mm
Diffused Batten
65 ELD214T5 2/14w 575mm
ELD221T5 2/21w 875mm
ELD224T5 2/24w 575mm
ELD228T5 2/28w 1175mm
78
(T5) models.
37 65
78
78
37 65
78
78
27
Application example
PROJECT BATTEN (LPB) SERIES
This multi-purpose wide body range of
65 120
78
78
120 68
91
78
91
91
PROJECT BATTENS
Industrial Reflected Batten Industrial Reflected Batten
Single tube with white powder coated metal reflector Twin tube with white powder coated metal reflector
68
91
123
68
91
91
123
68
91
91
32
PROJECT BATTEN (LPB) ACCESSORIES continued
PROJECT BATTEN ACCESSORIES
Joining Plate
White powder coated metal bracket to inline
mount diffused and wire guarded models
LPBJP1 Single tube models
33
Application example
PROJECT BATTEN (LPB)
T5 Series
Bare Batten
Single tube
Bare Batten
Twin tube
34
T5 (16mm diameter) fluorescent lamp G5 lamp cap
PROJECT BATTEN (LPB) T5 Series continued
PROJECT BATTENS (LPB) T5
91
LPBS135T5 1/35w 1475mm
LPBS139T5 1/39w 875mm
LPBS149T5 1/49w 1475mm
LPBS154T5 1/54w 1175mm
91
Reflector Kit
Single and twin tube white powder coated metal
Reflector Kit
Single and twin tube specular aluminium
36
PROJECT BATTEN (LPB) T5 Series ACCESSORIES
PROJECT BATTENS (LPB) T5 ACCESSORIES
Joining Plate
Powder coated metal bracket to in-line mount diffused and
wire guarded models
37
Application example
AWF Series
The AWF range is an IP65 protection
Weatherproof Diffused
Weatherproof Diffused
2/36w 1275mm
Mountings 840 apart
2/58w 1570mm
Mountings 1140 apart
170
Anti-vandal option available
Linear fluorescent models: T8 (26mm diameter) fluorescent lamp G13 lamp cap 38
Compact fluorescent models: TC-L type, 2G11 lamp cap
Application example
SWP Series
The SWP range is an IP65 protection
weatherproof luminaire suitable for surface
or pendant mounting. The body & diffuser
are constructed from UV stabilised
polycarbonate. The clips are stainless
Weatherproof Diffused
Single tube with clear pattern polycarbonate diffuser
Weatherproof Diffused
Twin tube with clear pattern polycarbonate diffuser
39
T8 (26mm diameter) fluorescent lamp G13 lamp cap
Application example
TUFFLITE Series
The Tufflite range is a vandal resistant IP65
Weatherproof Diffused
Single tube with clear polycarbonate diffuser
Weatherproof Diffused
Linear fluorescent models: T8 (26mm diameter) fluorescent lamp G13 lamp cap 40
Compact fluorescent models: TC-L type, 2G11 lamp cap
Application example
CORDELIA T5 Series
The Cordelia T5 range of IP65 weatherproof
luminaires is suitable for surface or pendant
mounting. The body and clear pattern
diffuser are manufactured from UV stabilised
polycarbonate. The clips are stainless steel.
Weatherproof Diffused
Single and twin tube with clear pattern polycarbonate diffuser
41
T5 (16mm diameter) fluorescent lamp G5 lamp cap
The commercial range of Davis products are available in diffused and open models. The diffused
range of Davis products utilise acrylic panels for light dispersion. The panels are either the lay-in
Application example
42
ARMSTRONG SERIES
The Armstrong series of luminaires are designed for recessed mounting in exposed 2 way T/Bar
COMMERCIAL DIFFUSED & OPEN
54
95
300
595
54
95
600
65
93
ARM254T5x 2/54w 1200mm (nom)
300
2 way T/Bar ceilings (including air handling models), plaster ceilings and also surface mounting.
95
300
300
Not available in Australia & New Zealand
95
400
RECESSED PLASTER T8
95
ATPW236x
633
ATPW336x
ATPW436x
RECESSED PLASTER T5
100
ARTMW236 2/36w 1200mm (nom)
ARTMW436 4/36w 1200mm (nom)
HELENE SERIES
The Helene range of asymmetrical distribution luminaires are available for recessed T/Bar,
recessed plaster and surface mounting. They are a single tube luminaire with a high grade
aluminium reflector.
RECESSED T/BAR T5
290
RECESSED PLASTER T8
80
HEP128T5x 1/28w 1192mm
HEP154T5x 1/54w 1192mm
290
Cut out size 1175 x 245
SURFACE MOUNTED T8
SURFACE MOUNTED T5
575
115
595
Not available in Australia & New Zealand
370
ATS218x 2/18w 668mm
188
Mountings 430 x 188
ATS236x 2/36w 1268mm
100
Mountings 1030 x 188
SURFACE MOUNTED T5
RECESSED T/BAR T8
105
300
300
390
105
390
RECESSED PLASTER T8
NAP236x
Cut out size 1230 x 313
344
RECESSED PLASTER T5
2/28w 1274mm
2/54w 1274mm
Cut out size 1230 x 313 344
and also for surface mounting. They are available with a lay-in or hinged frame lens. The hinged
frame models are also available with a sealing gasket.
100
Not available in Australia & New Zealand
100
Not available in Australia & New Zealand
595
BLGTW218x 2/18w 600mm
BLGTW318x 3/18w 600mm
100
277
BLP218x 2/18w 600mm
Cut out size 620 x 282
100
2/36w 1200mm
328
Cut out size 1235 x 282
100
BLPW418x 4/18w 600mm
Cut out size 620 x 587
628
BLPW236x 2/36w 1200mm
BLPW336x 3/36w 1200mm
BLPW436x 4/36w 1200mm
Cut out size 1235 x 587 Not available in Australia & New Zealand
277
BLGP218x 2/18w 600mm
Cut out size 620 x 282
100
2/36w 1200mm
328
Cut out size 1235 x 282
100
BLGPW418x 4/18w 600mm
Cut out size 620 x 587 628
BLGPW236x 2/36w 1200mm
BLGPW336x 3/36w 1200mm
BLGPW436x 4/36w 1200mm
Cut out size 1235 x 587
Not available in Australia & New Zealand
a clean ceiling line. The acrylic diffuser is extruded & roll formed with sonically welded end caps.
SURFACE MOUNTED T8
65
Mountings 372 x 140
TR236K19 2/36w 1258mm
43
Mountings 982 x 140
306
100
TR136K19 1/36w 1258mm
43
SURFACE MOUNT T5
1/54w 1258mm
43
TR154T5K19
TR328T5K19 3/28w 1258mm
306 TR354T5K19 3/54w 1258mm
Mountings 982 x 140
62
T5 (16mm diameter) fluorescent lamp G5 lamp cap
COMMERCIAL DIFFUSED & OPEN
UNIVERSAL MOUNTED T5
COMMERCIAL DIFFUSED & OPEN
60
LCUM314T5x 3/14w 600mm (nom)
LCUM324T5x 3/24w 600mm (nom)
Mountings 390 x 340
63
T5 (16mm diameter) fluorescent lamp G5 lamp cap
COMMERCIAL DIFFUSED & OPEN
RECESSED T/BAR AIR HANDLING T5
60
LCT124T5Ax 1/24w 600mm (nom)
490
LCTW224T5Ax 2/24w 600mm (nom)
64
T5 (16mm diameter) fluorescent lamp G5 lamp cap
COMMERCIAL DIFFUSED & OPEN
PLASTER RECESSED T5
COMMERCIAL DIFFUSED & OPEN
60
LCPN154T5x 1/54w 1200mm (nom)
230
330
65
T5 (16mm diameter) fluorescent lamp G5 lamp cap
HINGED FRAMES
This range of hinged frames allows a number of Davis Lighting luminaires to be converted from
This frame is supported on, and hinges from, the internal face of the T/Bar.
It is totally independent of the luminaire, which sits on the top of the T/Bar.
ATPW436
66
†Other panels available on application
RECESSED FRAME
For converting surface mount and recessed T/Bar
PLASTER FRAMES
PFBJ 420 x 420 Nom 427mm IF TIMBER BATTENING IS TO BE USED PLEASE ENSURE
THE TIMBER ABUTS THE FRAME AS SHOWN ABOVE.
Cut out size 432 x 432
(For Bianca Junior Only)
Note 1: If the plaster ceiling is sufficiently strong to support the weight of the luminaire in the area of installation, no timber battening is required. Simply fix the frame
67 directly to the ceiling material using the brackets provided. If the ceiling has insufficient support, additional timber battening will be required. It is the responsibility of the
installer to determine if timber battening is required.
SEALED RECESSED PLASTER
The sealed recessed plaster range of
SPECIAL APPLICATION
luminaires are designed to prevent
contaminants, such as dirt & insects, from
building up or entering the environment via
the luminaire. There are no areas on the
body or lens panel where dirt particles can
accumulate. To prevent contaminant build-
up, the external side of the lens panel has a
smooth surface & the body of the luminaire is
constructed such that there are no horizontal
surfaces where dirt can sit. A rubber gasket
provides a good seal between the lens
panel & the body of the luminaire to prevent
contaminant entry to the environment via
the luminaire. They are used extensively in
the food industry in areas of preparation &
display, and anywhere where a general dust
free environment is essential.
ATLAS SERIES
The Atlas sealed plaster is a front access luminaire for recessed mounting and incorporates a
1mm thick lanyard retained diffuser frame. The diffuser consists of two layers. The bottom layer is
a clear acrylic lens for easy cleaning. The top overlay is a prismatic acrylic diffuser.
SPECIAL APPLICATION
designed to protect the integrity of a
cleanroom. The construction method
and materials used in this range ensures
contaminants, toxicity or corrosion will not
enter the cleanroom environment via the
luminaire or cause airflow disturbance. All
Davis Lighting cleanroom luminaires have
been independently tested for cleanliness
compatibility with cleanroom classifications in
accordance with US Federal Standard 209E.
CRESSIDA SERIES
The Cressida cleanroom fitting is an IP65 dust & water proof luminaire for recessed mounting.
The range is available in both front & rear access models, and supplied standard with an inverted
prismatic diffuser. It is suitable for use in cleanrooms of Class 100 - 100000 (US federal Standard
209E) or Class 5 - 9 (ISO 14644.1)
RECESSED PLASTER T8
375
CRR336x 3/36w 1324mm
Cut out size 1280 x 328
70
T8 (26mm diameter) fluorescent lamp G13 lamp cap
CLEANROOM continued
SPECIAL APPLICATION
RECESSED PLASTER T8
120
CRF236x 2/36w 1315mm
CRF336x 3/36w 1315mm 325
RECESSED PLASTER T5
323
CRR214T5x 2/14w 764mm
280
CRR314T5x 3/14w 764mm
CRR224T5x 2/24w 764mm
132
330
CRF214T5x 2/14w 715mm 285
SPECIAL APPLICATION
are designed for use in high abuse areas
including prisons, detention cells &
rehabilitation centres. They are available in
both T8 & T5 models & are manufactured
from a minimum of 1.2mm powder coated
steel. The diffuser is a dual layer of 6mm high
impact clear polycarbonate underlay with an
acrylic prismatic overlay. The diffuser frames
are secured to the body by lanyards. The
frame is then fixed to the body with stainless
steel Torx pin head or Hex pin head screws.
The luminaires can be fitted with night
light facilities.
NORDUS SERIES
The Nordus is a vandal proof diffused security luminaire available in both recessed & surface
mounted models. It is suitable for high security areas.
RECESSED PLASTER T8
72
T8 (26mm diameter) fluorescent lamp G13 lamp cap
SECURITY FITTINGS continued
SPECIAL APPLICATION
RECESSED PLASTER T5
SURFACE MOUNTED T8
SURFACE MOUNTED T5
187
RANA SERIES
The Rana is a surface mounted vandal proof diffused security luminaire. It is suitable for high
security areas.
SURFACE MOUNTED T8
SURFACE MOUNTED T5
LEDA SERIES T8
The Leda Semi-Low Bright series is a range of models suitable for T/Bar ceilings, recessed
plaster ceilings and also surface mounted models. They are a low profile luminaire of only 100mm
in depth. They are available in T8 Fluorescent, as well as a range of compact fluorescent (CFL)
models.
RECESSED T/BAR T8
325
LET218x 2/18w 2x5 Cell 600mm (nom)
LET236x 2/36w 2x11 Cell 1200mm (nom)
100
290
300
100
LETW418x 4/18w 4x5 Cell 600mm (nom)
590
LETW236x 2/36w 2x11 Cell 1200mm (nom)
600
LETW336x 3/36w 3x11 Cell 1200mm (nom)
4/36w 4x11 Cell 1200mm (nom)
600
RECESSED PLASTER T8
325
LEP218x 2/18W 2x5 cell 670mm
Cut out size 625 x 338
100
100
LEPW418x 4/18w 4x5 Cell 670mm
Cut out size 625 x 638
665
LEPW236x 2/36w 2x11 Cell 1270mm
LEPW336x 3/36w 3x11 Cell 1270mm
LEPW436x 4/36w 4x11 Cell 1270mm
Cut out size 1235 x 638
SURFACE MOUNTED T8
370
LES218x 2/18W 2x5 cell 668mm
188
Mountings 430 x 188
They may be used in ancillary areas to where the Leda T8 is the major luminaire or in a stand
alone installation. They are particularly suitable for small utility areas.
100
290
300
325
LEP211PLx 2/11w TC-S 2x3 Cell 370mm
2/18w TC-L 2x3 Cell 370mm
100
365
11 watt TC-S lamp G23 base. 18 watt TC-L lamp 2G11 base
79
Also available for imperial size T/Bar. Please contact sales office for details.
ARMSTRONG SERIES T8
The Armstrong Semi-Low Bright series is a range of models suitable for T/Bar ceilings, recessed
RECESSED T/BAR T8
295
ART218x 2/18w 2x8 Cell 600mm (nom)
ART236x 2/36w 2x13 Cell 1200mm (nom)
100
300
428
595
595
277
ARP218Bx 2/18w 2x8 Cell 635mm
Cut out size 621 x 283
100
ARP236Bx 2/36w 2x13 Cell 1254mm
330 Cut out size 1236 x 283
582
ARPW218Bx 2/18w 2x8 Cell 635mm
ARPW318Bx 3/18w 3x8 Cell 635mm
ARPW418Bx 4/18w 4x8 Cell 635mm 100
Cut out size 621 x 588 627
277
ARP218x 2/18w 2x8 Cell 635mm
Cut out size 621 x 283
100
82
T8 (26mm diameter) fluorescent lamp G13 lamp cap
SURFACE MOUNTED T8
SEMI-LOW BRIGHT LOUVRE
100
Not available in Australia & New Zealand
100
Mountings 4151 x 488
83
T8 (26mm diameter) fluorescent lamp G13 lamp cap
PROTEUS SERIES T8
The Proteus is a single or twin tube semi-low bright slim surface mounted luminaire. The side
SURFACE MOUNTED T8
SURFACE MOUNTED T5
RHEA SERIES T8
The Rhea Low Bright series of luminaires is suitable for general office & VDU workstation areas.
The range is available in models to suit recessed T/Bar ceilings, recessed plaster ceilings and
also surface mounted models with a low profile body of only 100mm. Louvre material is either
specular or semi-specular. The cross blade is V shaped with closed top.
RECESSED T/BAR T8
290
300
325
RHTM218Ax 2/18w 2x4 Cell 600mm (nom)
2/36w 2x9 Cell 1200mm (nom)
100
395
400
525
RHTW218Ax 2/18w 2x4 Cell 600mm (nom)
RHTW318Ax 3/18w 3x4 Cell 600mm (nom)
RHTW236Ax 2/36w 2x9 Cell 1200mm (nom)
3/36w 3x9 Cell 1200mm (nom) 595
100
RHTW336Ax
600
RECESSED PLASTER T8
325
RHP218x 2/18W 2x4 cell 670mm
Cut out size 625 x 338
100
370
RHS218x 2/18W 2x4 cell 668mm
188
Mountings 430 x 188
100
Rhea Surface Mounted
87
T8 (26mm diameter) fluorescent lamp G13 lamp cap
RHEA SERIES COMPACT FLUORESCENT (CFL)
This range of twin compact fluorescent luminaires is a perfect addition to the Rhea T8 series. They
325
RHT211PLx 2/11w TC-S 2x3 Cell 300mm (nom)
100
290
300
365
370
RHS211PLx
188
100
11 watt TC-S lamp G23 base. 18 watt TC-L lamp 2G11 base
88
Also available for imperial size T/Bar. Please contact sales office for details.
CALLISTO SERIES T8
The Callisto Low Bright series of luminaires are suitable for general office & VDU workstation
LOW BRIGHT LOUVRE
areas. The range is available in models to suit recessed T/Bar ceilings, recessed plaster ceilings
and also surface mounted models with a low profile body of only 100mm (with the exception of 2 tube
600mm wide models, which are 125mm). Louvre material is either specular or semi-specular.
The cross blade is V shaped with closed top.
RECESSED T/BAR T8
325
CAT218x 2/18w 2x7 Cell 600mm (nom)
100
290
300
395
400
525
CATW218Ax 2/18w 2x7 Cell 600mm (nom)
CATW318Ax 3/18w 3x7 Cell 600mm (nom)
CATW236Ax 2/36w 2x15 Cell 1200mm (nom)
3/36w 3x15 Cell 1200mm (nom) 595
100
600
RECESSED PLASTER T8
325
CAP218x 2/18w 2x7 Cell 670mm
Cut out size 625 x 338
100
625
100
665
100
Mountings 1030 x 188
91
T8 (26mm diameter) fluorescent lamp G13 lamp cap
THEBE SERIES T8
The Thebe Low Bright series of luminaires is suitable for general office & VDU workstation areas.
RECESSED T/BAR T8
325
THT136x 1/36w 1x10 Cell 1200mm (nom)
2/36w 1x10 Cell 1200mm (nom)
140
290
300
325
THTM136Ax 1/36w 1x10 Cell 1200mm (nom)
THTM236Ax 2/36w 1x10 Cell 1200mm (nom)
140
395
400
RECESSED PLASTER T8
365
cut-off across the tube, with lateral blades providing 63º to cut-off along the tube. Louvres are available
in specular or semi-specular and are designed to illuminate the horizontal working surface while the
sharp lamp cut-off reduces veiling reflection in computer screens. The multi-tube louvre features an
apparent brightness control separation between cell groups. Brightness contrast reduction is created
by brightening the dark area between cell groups. The louvre assembly in a metal frame which has a
hinged latching system holding the assembly securely to the body. The unique universal body design
allows the luminaire to be surface mounted, T/Bar recessed or, with the addition of the PF frame,
recessed into a suspended plaster ceiling. The Metis may also be manufactured as a dedicated suspended
plaster ceiling luminaire or supplied to accommodate 246mm x 20mm AC slots for air delivery or return.
The high light output ratio and optimal glare control of the Metis integrated with DALI lighting control
systems offer straightforward solutions for handling all kinds of ECOSmart lighting/energy management
tasks for almost any structural condition.
93
T5 (16mm diameter) fluorescent lamp G5 lamp cap Also available for imperial size T/Bar. Please contact sales office for details.
UNIVERSAL MOUNT T5
60
ME2UM328T5x 3/28w 3x26 Cell 1200mm (nom)
ME2UM354T5x 3/54w 3x26 Cell 1200mm (nom)
Mountings 950 x 340
Metis 2 ME2UM Accessories
• PFM600 - Frame for recessed mounting of 14/24w models in plaster ceilings.
• PFM1200 - Frame for recessed mounting of 28/54w models in plaster ceilings.
94
T5 (16mm diameter) fluorescent lamp G5 lamp cap Also available for imperial size T/Bar. Please contact sales office for details.
RECESSED T/BAR AIR HANDLING T5
LOW BRIGHT LOUVRE
60
ME2T124T5Ax 1/24w 1x12 Cell 600mm (nom)
ME2T128T5Ax 1/28w 1x26 Cell 1200mm (nom)
ME2T154T5Ax 290
300
290
ME2TM214T5Ax 2/14w 2x12 Cell 600mm (nom)
60
490
490
60
95
T5 (16mm diameter) fluorescent lamp G5 lamp cap Also available for imperial size T/Bar. Please contact sales office for details.
LOW BRIGHT LOUVRE
RECESSED PLASTER T5
60
ME2P124T5x 1/24w 600mm (nom)
ME2P214T5x 2/14w 600mm (nom)
ME2P224T5x 2/24w 600mm (nom)
Cut out size 595 x 295
330
ME2P128T5x 1/28w 1200mm (nom)
ME2P154T5x 1/54w 1200mm (nom)
ME2P228T5x 2/28w 1200mm (nom)
ME2P254T5x 2/54w 1200mm (nom)
Cut out size 1195 x 295
96
T5 (16mm diameter) fluorescent lamp G5 lamp cap Also available for imperial size T/Bar. Please contact sales office for details.
EUROPA SERIES COMPACT FLUORESCENT (CFL)
The Europa Low Bright series of luminaires are suitable for general office and VDU workstation
LOW BRIGHT LOUVRE
areas. They are a semi-indirect style of luminaire. The lamps are mounted above and hidden
by the louvre vanes. This ensures a high quality, low glare installation. The range is available in
models to suit both recessed T/Bar ceilings and recessed plaster ceilings. The louvre material is
EMERGENCY
types of applications. These
luminaires are available as a
variable rate charging unit or dual
rate. Computer monitored units
are also available upon request.
The luminaires may be supplied to
a number of standards including Australian
AS2293, Singapore SS263 part 2, & IEC60598.22.
Single tube luminaires are available in non-maintained
or maintained models, while twin tube luminaires are available in
maintained or sustained models.
All spacing tables & classifications included in this section refer to Australian AS2293.1 &
3 respectively. The luminaires are multi-classified in accordance with Appendix C, Clause 3.1 of
AS2293.3 & the spacing tables as published in this catalogue are for Australian use only.
Non-maintained (single tube) An emergency luminaire in which the lamp is energised only when the
supply to the normal lighting fails.
Maintained (single tube) An emergency luminaire in which the lamp is in operation at all times
when normal or emergency lighting is required.
Maintained (twin tube) An emergency luminaire in which both lamps are in operation during
times of normal supply and the emergency lamp remains on when
emergency lighting is required.
Sustained (twin tube) An emergency luminaire in which one lamp is in operation during times
of normal supply and the other (emergency) lamp is energised when
normal supply fails & emergency lighting is required.
Note: The emergency luminaires listed on the following pages are limited to those of which classification
tables have been prepared. Other models are available as emergency luminaires. Please consult your local
98
SLIMLINE BATTEN SERIES LP
This multi-purpose slim body range of luminaires can be mounted directly to ceilings or walls,
EMERGENCY
or suspended by chain or conduit. 90º turn twist knobs allow the gear tray cover to be easily
removed without the need for tools. This range has a wide variety of add-on accessories
including square, round & oval diffusers in optional patterns, wire guards and reflectors. The bare
tube models can be end-to-end mounted.
SLIMLINE BATTEN T8
Bare Batten
Single tube
Bare Batten
Twin tube
99
T8 (26mm diameter) fluorescent lamp G13 lamp cap
SLIMLINE BATTEN T8 continued
EMERGENCY
Square Diffused Batten Square Diffused Batten
Single tube with prismatic acrylic diffuser Twin tube with prismatic acrylic diffuser
100
T8 (26mm diameter) fluorescent lamp G13 lamp cap
PROJECT BATTEN SERIES LPB
This multi-purpose wide body range of luminaires can be mounted directly to ceilings or walls, or
EMERGENCY
suspended by chain or conduit. The wide body of this range of luminaires makes it particularly
suitable for high-rise or underground car parks where extra width is required to cover J-boxes. This
range has a variety of add-on accessories including square diffusers, wire guards and reflectors.
The bare tube and reflector models can be end-to-end mounted without additional parts. The
wire guard & diffused models can be end-to-end mounted with the addition of the joining plate
accessory.
PROJECT BATTEN T8
101
T8 (26mm diameter) fluorescent lamp G13 lamp cap
PROJECT BATTEN T8 continued
EMERGENCY
Square Diffused Batten Square Diffused Batten
Single tube with prismatic acrylic diffuser Twin tube with prismatic acrylic diffuser
C0: A63, B63, C63, D50, E50 C0: A40, B40, C40, D16, E32
C90: A63, B63, C32, D8, E25 C90: A40, B40, C25, D6.3, E20
C180: A40, B40, C40, D32, E32
LPBS236EM 2/36w 1225mm Maintained
LPBS236ES 2/36w 1225mm Sustained
C0: A80, B80, C80, D32, E63
C90: A63, B63, C50, D12.5, E32
102
T8 (26mm diameter) fluorescent lamp G13 lamp cap
PROJECT BATTEN T5
EMERGENCY
103
T5 (16mm diameter) fluorescent lamp G5 lamp cap
PROJECT BATTEN T5 continued
EMERGENCY
Square Diffused Batten Square Diffused Batten
Twin tube with prismatic acrylic diffuser Single and twin tube with prismatic acrylic
diffuser
123
68
91
91
C0: A25, B25, C25, D20, E20 C0: A40, B40, C40, D40, E40
C90: A25, B25, C25, D6.3, E16 C90: A40, B40, C40, D12.5, E25
C180: A25, B25, C25, D25, E20 C180: A40, B40, C40, D40, E40
123
68
91
91
104
T5 (16mm diameter) fluorescent lamp G5 lamp cap
AWF SERIES
The AWF range is an IP65 protection weatherproof luminaire suitable for surface or pendant
EMERGENCY
mounting. The body is constructed from corrosion resistant, glass reinforced, auto extinguishing
polyester. The diffuser is impact resistant polycarbonate. The luminaire is supplied with stainless
steel clips.
AWF T8
Weatherproof Diffused
Twin tube
105
T8 (26mm diameter) fluorescent lamp G13 lamp cap
AWF T5
EMERGENCY
Weatherproof Diffused
Single tube
Weatherproof Diffused
Twin tube
106
T5 (16mm diameter) fluorescent lamp G5 lamp cap
EMERGENCY
SWP SERIES
The SWP range is an IP65 protection weatherproof luminaire suitable for surface or pendant
EMERGENCY
mounting. The body & diffuser are constructed from UV stabilised polycarbonate. The clips are
stainless steel.
Mountings • Pendant 473 • Surface 473x25 36W Mountings • Pendant 902 • Surface 902x25
58W Mountings • Pendant 965 • Surface 965x25
Weatherproof Diffused
107
T8 (26mm diameter) fluorescent lamp G13 lamp cap
ARMSTRONG RECESSED T/BAR
The Armstrong recessed T/Bar emergency luminaire is fitted with a lay-in K12 lens and is supplied
EMERGENCY
standard with 25mm cable entry for hard wiring or 1.5 metre flex and plug. Please check with your
local sales office for the standard supplied in your area.
RECESSED T/BAR T8
RECESSED T/BAR T5
base by three unobtrusive catches forming a low circular profile. EPDM seals are provided
between the body at the ceiling and also at the body to the diffuser. These seals restrict insect
intrusion to give a clean overall appearance. Installation is made easy by having the electronic
control gear, emergency inverter and batteries integral to the luminaire. The emergency oyster
matches the lines of the 40W parent luminaire and complements the parent when an unbroken
array of luminaires is required. It may be used as a standalone for toilets/rest rooms. Typical
applications are dining areas, foyers, corridors, malls and switchboard cupboards/rooms.
Circular Fitting
D
CFT40T5EM 1/40w T5 435d x 125h
H
SIRIUS
Sirius is the brightest star in the night sky and now Davis Lighting offers you Sirius the brightest
idea in emergency lighting. Designed with our planet in mind, Sirius’ designers have incorporated
leading edge technology to reduce Greenhouse gas. This is achieved not just in the energy to
maintain the emergency batteries, but also in the energy requirements of materials to produce
the product, so often overlooked by others. Sirius utilises a single LED to deliver more light
than that of 10W halogen fittings currently available in the market. Less than 2W of energy is
required to maintain Sirius batteries. For further information relating to your emergency installation
requirements, download our comprehensive data sheet or contact your local Davis Lighting
representative and help save our planet.
9
Sirius A 1/LED
Utilises a 56mm mounting plate
Ø29
Ø56
SRA3LED-ENM
Cut out size Ø 44mm
Sirius B 1/LED
Ø29
SRB3LED-ENM
Cut out size Ø 74mm
109
T5 (16mm diameter) circular fluorescent lamp 2GX13 lamp cap
Maximum Spacings for Class A Luminaires
EMERGENCY
110
Maximum Spacings for Class B Luminaires
EMERGENCY
111
Maximum Spacings for Class C Luminaires
EMERGENCY
112
Maximum Spacings for Class D Luminaires
EMERGENCY
113
Maximum Spacings for Class E Luminaires
EMERGENCY
114
LOW BAY
Application example
The Low Bay range of Davis products offers
HID luminaires for low mounting heights,
LOW BAY
SURFACE MOUNTED
LBP250MVW 250w MV
LBP400MVW 400w MV
LBP250MHW 250w MH
LBP400MHW 400w MH
LBP150SW 150w HPS
LBP250SW 250w HPS
LBP400SW 400w HPS
Mountings 400x95
115
LOW BAY
LOW BAY PAC JUNIOR
The Low Bay Pac Junior is a surface mounted low wattage HID luminaire. Luminaire is supplied
LOW BAY
with a wire guard. Lamp holder is E27, lamp is coated elliptical.
SURFACE MOUNTED
LBPJ80MVW 80w MV
LBPJ125MVW 125w MV
LBPJ70MHW 70w MH
LBPJ100MHW 100w MH
LBPJ150MHW 150w MH
116
BIANCA JUNIOR
The Bianca Junior is a surface mounted low wattage HID luminaire that may be supplied with
LOW BAY
a number of optional formed polycarbonate diffusers in a gasketed hinged frame. This includes
pyramid, shallow or deep drop sided styles. The luminaires are also suitable for recessed plaster
ceilings with the addition of the appropriate Davis "PF" recessed frame. Control gear is either
integral (mounted on a tray) or remote. Lamp holder is E27, lamp is clear elliptical or tubular.
(100w HPS is a E39 lamp holder).
SURFACE MOUNTED
BIJS80MVP 80w MV
BIJS125MVP 125w MV
BIJS70MHP 70w MH
BIJS100MHP 100w MH
BIJS150MHP 150w MH
BIJS80MVS 80w MV
BIJS125MVS 125w MV
BIJS70MHS 70w MH
BIJS100MHS 100w MH
BIJS150MHS 150w MH
117
BIANCA JUNIOR continued
LOW BAY
SURFACE MOUNTED
BIJS80MVD 80w MV
BIJS125MVD 125w MV
BIJS70MHD 70w MH
BIJS100MHD 100w MH
BIJS150MHD 150w MH
118
Application example
The Medium Bay range of Davis products offers HID
luminaires for medium mounting heights, typically 5 to 8
metres. The range comprises of luminaires suitable for, but
MEDIUM BAY
BIANCA SENIOR
The Bianca Senior is a universal mounting HID luminaire. The luminaire may be either surface
or recessed T/Bar mounted. The luminaires are also suitable for recessed plaster ceilings with
the addition of the appropriate Davis "PF" recessed frame. The luminaire may be supplied with
a number of optional formed polycarbonate diffusers in a gasketed hinged frame. This includes
pyramid, shallow or deep drop sided styles. Control gear is either integral (mounted on a tray) or
UNIVERSAL MOUNTED
BISU250MHP 250w MH
BISU400MHP 400w MH
BISU250MHS 250w MH
BISU400MHS 400w MH
119
MEDIUM BAY
UNIVERSAL MOUNTED
BISU250MHD 250w MH
BISU400MHD 400w MH
Lamp holder E39. Lamps (MV) coated elliptical (MH/HPS) clear elliptical/tubular.
120
TITAN Application example
TISA250MHG 250w MH
TISA400MHG 400w MH
TISS250MHG 250w MH
TISS400MHG 400w MH
121
TITAN continued
MEDIUM BAY
RECESSED MOUNTED
TIRA250MHG 250w MH
TIRA400MHG 400w MH
TIRS250MHG 250w MH
TIRS400MHG 400w MH
Titan Accessories
Asymmetrical Symmetrical
beam type beam type Clear flat glass in hinged gasketed frame
122
COOL ROOM
Application example
DEIMOS
The Deimos HID luminaire may be used in cool
room applications. The luminare is available in a
COOL ROOM
SURFACE MOUNTED
RECESSED MOUNTED
DER250MHS 250w MH
DER400MHS 400w MH
123
COOL ROOM
Deimos HID Cool Room continued
COOL ROOM
Deimos Accessories
• TH150 – 150 watt tungsten halogen standby lamp & relay.
• TH250 – 250 watt tungsten halogen standby lamp & relay.
• DLP – Diffuser large pyramid (spare diffuser).
• DLS – Diffuser large shallow drop (spare diffuser).
• DLD – Diffuser large deep drop (spare diffuser).
P type lens
When using this lens option replace S
Recessed
polycarbonate
D type lens
When using this lens option replace S
at end of model number with D
Recessed
124
Application example
Highbay Lighting is suitable for mounting heights
typically 7 metres to 20 metres. Metal reflector
highbays provide high horizontal illuminance on
HIGH BAY
HB150MH 150w MH
HB250MH 250w MH
HB400MH 400w MH Lamp holder E39.
(150w MH E27)
HB150S 150w HPS
HB250S 250w HPS Lamps coated elliptical.
HB400S 400w HPS
HB250MVRP 250w MV
HB400MVRP 400w MV
HB150MHRP 150w MH
HB250MHRP 250w MH
HB400MHRP 400w MH
125
HB PENDANT MOUNTED HID HIGH BAY continued
HIGH BAY
High Bay Components
HBREF
Aluminium High Bay Reflector
HBGRC
Tempered glass with aluminium ring clamp
HBG
Tempered glass only
HBRC
Aluminium ring clamp only
HBHG
High bay hinged glass
HBHB
High bay hinged bowl
HBDB
Drop bowl only
Standby lamps
•T H150 – 150 watt tungsten halogen standby lamp & relay.
• TH250 – 250 watt tungsten halogen standby lamp & relay.
126
Application example
NA16x250MVC 250w MV
NA16B150MHC 150w MH
NA16x250MHC 250w MH
NA16x150SC 150w HPS Dimensions
(all 16 inch)
with Type B
gear box
Lamps coated elliptical.
127
NASA Bay 16 Inch
Deep Drop Bottom
NA16x250MVD 250w MV
NA16B150MHD 150w MH
NA16x250MHD 250w MH
NA16x150SD 150w HPS
NA16x250SD 250w HPS Lamps coated elliptical.
160
NA22x250SC 250w HPS
NA22x400SC 400w HPS Lamps coated elliptical.
Dimensions
(all 22 inch) NASA Bay 22 Inch
with Type B Deep Drop Bottom
gear box
NA22x250MVD 250w MV
NA22x400MVD 400w MV
NA22x250MHD 250w MH
NA22x400MHD 400w MH
NA22x150SD 150w HPS
NA22x250SD 250w HPS
NA22x400SD 400w HPS Lamps coated elliptical.
128
HQC COMPACT
The HQC Compact is an IP65 low wattage HID floodlight. The body is black powder coated cast
FLOODLIGHTS
aluminium. Tempered glass lens in hinged frame. The control gear is integral & tray mounted.
HQC70MH 70w MH
HQC150MH 150w MH
Fixing Holes
10mm DIA
The HQG General is an IP65 HID floodlight suitable for medium area applications. The body is black
powder coated cast aluminium. Tempered glass lens in hinged frame. The control gear is integral &
tray mounted. Lamp holder is E39.
HQG250MV 250w MV
HQG250MH 250w MH
HQG400MH 400w MH
Fixing Holes
10mm DIA
129
HYDOR
The Hydor low wattage floodlight is an IP65 rated weatherproof luminaire. It has a diecast
FLOODLIGHTS
aluminium body & hinged frameless tempered glass. The glass is secured by stainless steel clips.
HY80MV 80w MV
HY70MH 70W MH
HY100MH 100w MH
HY150MH 150w MH
HY70S 70w HPS
TUREIS
The Tureis is an IP65 low wattage HID floodlight suitable for many small area applications. The
body & lens are UV stabilised polycarbonate. The body finish colour is black. The lens is frameless
hinged. The control gear is integral & tray mounted. Lamps are E27.
TU80MV 80w MV
TU70MH 70w MH
70w HPS
130
T8 (26mm diameter) fluorescent lamp G13 lamp cap
KUMA 1
The Kuma 1 is the smaller model of the Kuma range. It is an IP65 low wattage HID floodlight. The
FLOODLIGHTS
body is black powder coated cast aluminium. Tempered glass lens in hinged frame. The control
KU1W80MV 80w MV
KU1W125MV 125w MV
KU1W70MH 70w MH
KU1W100MH 100w MH
KU1W150MH 150w MH
KU1W70S 70w HPS
KUMA 2
The Kuma 2 is the larger model of the Kuma range. It is an IP65 HID floodlight suitable for medium
area applications. The body is black powder coated cast aluminium. Tempered glass lens in
hinged frame. The control gear is integral & tray mounted. Lamp holder is E39.
KU2W250MV 250w MV
KU2W250MH 250w MH
KU2W400MH 400w MH
KU2W150S 150w HPS
KU2W250S 250w HPS
KU2W400S 400w HPS
131
POLARIS
The Polaris is a 1000w IP65 HID floodlight suitable for large area applications. The body is black
FLOODLIGHTS
powder coated cast aluminium. Tempered glass lens in hinged frame. It is suitable for remote
control gear only, which may be supplied gear tray mounted or in a weatherproof box. Lamp
holder is E39. (For control gear refer “Remote Control’ section.)
380
514
168
134
50
363
Lamp holder E39.
180 Lamps clear tubular.
ø16
50
MINTAKA
The Mintaka is a 2000w IP65 HID floodlight suitable for large area applications. The body is black
powder coated cast aluminium. Tempered glass is frameless hinged. It is suitable for remote
control gear only, which may be supplied gear tray mounted or in a weatherproof box. Lamp
holder is E39. (For control gear refer “Remote Control” section.)
285 510
135
495
543
180
ø16
ø16
50
Lamp holder E39.
150 150
Lamps clear tubular. 523
132
FLOODLIGHTS
TALITHA
The Talitha is an architectural range of area lighting luminaires. They are IP65 weatherproof and
FLOODLIGHTS
the body is constructed of black powder coated metal. The powder coated steel mounting bracket
allows vertical adjustment of the luminaire. Lamp holder is E39.
190
628 380
800
ELTANIN 1
The Eltanin 1 is the smaller model of the Eltanin range. It is an IP65 low wattage HID asymmetrical
floodlight. The body is black powder coated cast aluminium. Tempered glass lens in hinged frame.
The control gear is integral. Lamp holder is RX7s. Lamps are double ended.
86 233
38 52 52
ELTANIN 2
The Eltanin 2 is the second model of the Eltanin range. It is an IP65 HID asymmetrical floodlight.
FLOODLIGHTS
The body is black powder coated cast aluminium. Tempered glass lens in hinged frame. The
control gear is integral & tray mounted. Lamp holder is E39.
143 395
EL2W250MH Wide 250w MH
EL2W400MH Wide 400w MH
EL2W150S Wide 150w HPS
EL2W250S Wide 250w HPS
585
48
CABLE GLAND
ENTRY
ELTANIN 3
The Eltanin 3 is the third & largest model of the Eltanin range. It is an IP65 HID asymmetrical
floodlight. The body is black powder coated cast aluminium. Frameless hinged tempered glass.
The control gear is integral & tray mounted. It may also be supplied with remote control. Lamp
holder is E39. (For remote control gear refer “Remote Control” section.)
165
ø20
50 ø14 75
Lamp holder E39.
75
606
134
TUNGSTEN HALOGEN FLOODLIGHT RANGE
Body is cast aluminium in black, beige, green or white (1000 & 1500w models available in black
FLOODLIGHTS
only). The fixture has a hinged & rubber gasket sealed tempered glass. Lamp holders are Rx7s.
Lamps are linear tungsten halogen. Available in 150 and 500 watt round or rectangular and 1000
& 1500w rectangular.
180
180
260
52 15 70 20
103 135
180
145
180
260
185
52 70 20 52 15
15
Lamp holder RX7s.
103 135 106
135
Asellus COMPACT FLUORESCENT
The Asellus compact fluorescent floodlight is particularly suitable for security lighting, where
FLOODLIGHTS
instant light is required. They are ideally suited for control by PE cell or motion sensor. They offer
an economical replacement for tungsten halogen floodlights by virtue of long life, light output & are
less affected by voltage fluctuations. Luminaires are fitted with G24d bases for TC-D lamps.
136
FLOODLIGHTS
FLASHFLOOD
The FlashFlood has a high temperature nylon glass filled body with silicon rubber cable &
FLOODLIGHTS
weatherproof sealing ring. The lamp holder is ceramic. It is suitable for either wall or ceiling
mounting in both interior & exterior applications. It is mainly used in domestic situations for small
areas, security & feature lighting.
100
DFF Less lamp in bulk pack
(30 per carton)
PAR38 LAMP
69
137
REMOTE CONTROL GEAR
70w – 150w M/Halide & 70w – 100w HPS remote control gear does not include an igniter.
REMOTE CONTROL
The igniter for these light sources is installed in the relevant Davis Lighting luminaire, with the
exception of the 70w HPS models. The lamp used in the Davis Lighting 70w HPS models
incorporates an internal igniter.
250w – 400w M/Halide remote control gear (suffix IG) does include an igniter. This remote control
gear may be used to a maximum distance of 100 metres from the luminaire it is controlling. This
is due to the restrictions of the igniter.
150w – 400w HPS remote control gear is supplied either without an igniter, where a standard HPS
igniter is fitted to the luminaire, or with an igniter (suffix IG). The remote control gear fitted with an
igniter uses a special tapped ballast & matching igniter for long distance operation. They may be
used to a maximum distance of 10 metres from the luminaire for 150 watt, & 40 metres from the
TRAY MOUNTED
GT80MV 80w MV
GT125MV 125w MV
GT250MV 250w MV
GT400MV 400w MV
290
265
GT70MH 70w MH
GT100MH 100w MH
GT150MH 150w MH
GT250MHIG* 250w MH (With igniter)
GT400MHIG* 400w MH (With igniter)
138
REMOTE CONTROL GEAR continued
REMOTE CONTROL
Control Gear
Mounted on perforated metal tray in white powder
Control Gear
Mounted on perforated metal tray in weatherproof (IP65) cast
aluminium box with tamper proof, stainless steel, socket head,
WPCA80MV 80w MV
WPCA125MV 125w MV
WPCA250MV 250w MV
WPCA400MV 400w MV
WPCA70MH 70w MH
154
WPCA100MH 100w MH
WPCA150MH 150w MH
WPCA250MHIG* 250w MH (With igniter)
WPCA400MHIG* 400w MH (With igniter) 430
386
WPCA70S 70w HPS
WPCA100S 100w HPS
WPCA150S 150w HPS
246
210
50
139
REMOTE CONTROL GEAR continued
REMOTE CONTROL
TRAY MOUNTED 1000w & 2000w
L2
B
150
170
GT1000MH 1000w MH
GT1000MHIG* 1000w MH (With igniter)
GT2000MH 2000w MH 448
460
GT2000MHIG* 2000w MH (With igniter) 480
GT1000S 1000w HPS
1000w HPS (With igniter)
Control Gear
Mounted on perforated metal tray in weatherproof (IP65) cast aluminium
WPCA1000MH 1000w MH
WPCA1000MHIG* 1000w MH (With igniter)
WPCA2000MH 2000w MH
WPCA2000MHIG* 2000w MH (With igniter)
WPCA1000S 1000w HPS
WPCA1000SIG** 1000w HPS (With igniter)
140
REMOTE CONTROL GEAR continued
REMOTE CONTROL
Control Gear
Mounted on perforated metal tray in white powder coated pendant metal box with hinged cover. Complete
with suspension hook. Supplied with 25mm cable entry for hard wiring or 1.5m flex and plug and flex and
HBRP250MV 250w MV
HBRP400MV 400w MV
HBRP250MH 250w MH
HBRP400MH 400w MH
HBRP250S 250w HPS
141
Davis Lighting provides high quality versatile downlighting at a price and performance levels to
meet a wide range of budgets. The use of precise, optically designed reflectors provide excellent
glare control and good light output, catering for all facets of wall washing, accent lighting, task
DOWNLIGHTS
lighting and general lighting. Our downlight mounting arrangements allow for consistently fast
installation every time.
RECESSED MOUNTED
365
SHS113PLx 1/13w TC-D
SHS118PLx 1/18w TC-D
SHS213PLx 2/13w TC-D
105
2/18w TC-D
Cut out size Ø 175mm
150 nom 110
190
70
End View
2/26w TC-D
Cut out size Ø 210mm
200 nom
230
70
End View
RECESSED MOUNTED
365
SHS113PLDGx 1/13w TC-D
SHS118PLDGx 1/18w TC-D
SHS213PLDGx 2/13w TC-D 105
2/18w TC-D
Cut out size Ø 175mm
150 nom
110
190
70
End View
405
SHL118PLDGx 1/18w TC-D
SHL126PLDGx 1/26w TC-D
122
230
End View
End View
DOWNLIGHTS
RECESSED MOUNTED
70
End View
365
SHS113PLCBx 1/13w TC-D
SHS118PLCBx 1/18w TC-D
2/13w TC-D
105
SHS213PLCBx
2/18w TC-D
Cut out size Ø 175mm
150 nom
110
190
70
End View
End View
models. There are two versions, either open or enclosed. The enclosed version is supplied with
a flush mounted tempered glass rated to IP44. The Sinope utilises a specular reflector and is
designed for lamps to be mounted in a horizontal position. The lamps are TC-DE type for all
models. The 18w & 26w versions are available with either integral or remote electronic control
gear. The 42w versions are only available with electronic gear in a remote box. They may be
supplied for hard wiring or fitted with flex & plug.
RECESSED MOUNTED
165
Cut out size Ø 210mm
Ø230
Ø230
DOWNLIGHTS
cover. They are designed for compact fluorescent lamps mounted in a horizontal position. Gear is
supplied in a remote box. Lamps are TC-D type when used with conventional control gear & TC-D
type when used with electronic control gear. They may be supplied for hard wiring or fitted with flex
& plug.
RECESSED MOUNTED
188
188
There are two versions. The first has a regressed front frame with tempered glass and the second
has the tempered glass flush mounted. They are both designed for compact fluorescent lamps
mounted in a horizontal position. Gear is supplied in a remote box. Lamps are TC-D type when
used with conventional control gear & TC-D type when used with electronic control gear. They
may be supplied for hard wiring or fitted with flex & plug.
RECESSED MOUNTED
240
240
220
220
147
DOWNLIGHTS (HID)
MIRACH HID DOWNLIGHTS
High efficiency recessed Downlights suitable for 70/150W G12 single ended metal halide lamps.
DOWNLIGHTS (HID)
The housing is powder coated high-pressure die cast aluminium with a high purity, precise,
optically designed aluminium reflector. The lamp is enclosed by a tempered glass UV filter making
this the ideal downlight for all facets of accent lighting, task lighting and general lighting. Supplied
standard with electronic control gear, will assist with ECOSmart building design and accreditation.
RECESSED MOUNTED
MR135MH 35w MH
MR170MH 70w MH
Cut out size Ø 125mm
139
Ø145
MR270MH 70w MH
MR2150MH 150w MH
Cut out size Ø 160mm
200
Ø180
148
DOWNLIGHTS (HID)
ALCOR HID DOWNLIGHTS
High efficiency recessed Downlights suitable for 70/150W RX7s double ended metal halide lamps.
DOWNLIGHTS (HID)
The housing is powder coated high-pressure die cast aluminium with a high purity, precise,
optically designed aluminium reflector. The lamp is enclosed by a tempered glass UV filter making
this the ideal downlight for all facets of accent lighting, task lighting and general lighting. Supplied
standard with electronic control gear, will assist with ECOSmart building design and accreditation.
RECESSED MOUNTED
ACS70MH 70w MH
Cut out size Ø 160mm
Ø188 142
ACL150MH 150w MH
Cut out size Ø 180mm
142
Ø215
149
DOWNLIGHTS (HID)
SHOPFITTER HID DOWNLIGHTS
High efficiency recessed adjustable downlights available in round or square housing. The round
DOWNLIGHTS (HID)
is suitable for 20/35W G8.5 or 70/150W G12 single ended metal halide lamps, and the square
is suitable for 70/150W double ended metal halide lamps. The housing is powder coated high-
pressure die cast aluminium with a high purity, precise, optically designed aluminium reflector. The
lamp is enclosed by a tempered glass UV filter making this the ideal downlight for all facets of
wall washing, accent lighting, task lighting and general lighting. Supplied standard with electronic
control gear, will assist with ECOSmart building design and accreditation.
RECESSED MOUNTED
CP20MH 20w MH
CP35MH 35w MH 100
DN70MH 70w MH
DN150MH 150w MH
152
Ø190
Tania
TN70MH 70w MH
TN150MH 150w MH
102
150
SURFACE MOUNTED - EXTERIOR
SIGMA BULKHEAD
The Sigma (IP65) bulkhead is available in models for use with incandescent or compact fluorescent
SURFACE MOUNTED - EXTERIOR
light sources. The body & lens is manufactured from UV stabilized impact resistant polycarbonate.
The internal lamp holder mounting plate is white powder coated metal.
SI100GLS
SI19PL 1x9w
SI29PL 2x9w
LARRISA WALLPACK
The Larrisa wall mounted vandal resistant luminaire is optically designed to achieve wide luminaire
spacing. Construction from UV stabilised impact-resistant, flame-retardant polycarbonate makes
Larrisa the choice when looks and performance are of importance. Larrisa is ideal in the lighting
of walkways and entrance areas from the building structure and can be used for educational
institutes, hospital/healthcare and commercial premises. Available with HPS, Metal Halide or 42W
TC-T lamp.
Larrisa
LA80MV 80w MV
LA70S 70w HPS 260 185
LA70MH 70w MH
290
151
CIRCULAR
OYSTER CEILING LIGHTS
The oyster construction consists of a white acrylic diffuser held on a discreet metal base by three
CIRCULAR
unobtrusive catches forming a low circular profile. EPDM seals are provided between the body
at the ceiling and also at the body to the diffuser. These seals restrict insect intrusion to give
a clean overall appearance. Installation is made easy with the electronic control gear integral
to the luminaire. The oyster is complimented by an emergency version which is housed in the
40W electronic oyster. The oyster is an ideal selection for areas requiring an unbroken array of
luminaires, dining areas, foyers, corridors, shopping malls and homes.
H
CFT22T5 1/22w T5 295(D) x 85(H)
CFT40T5 1/40w T5 435(D) x 125(H)
ABD Incandescent
White plastic base with opal plastic diffuser. 75w GLS
maximum (or equivalent CFL energy saving lamp).
Maximum lamp diametre 62mm.
ABD7501 1/75w GLS 265 x 120 265
Calypso Circular
Black powder coated cast aluminium base with opal PC diffuser.
CY226PLP
Ø350
CY226PLL
152
PE CELL - QS16 SURFACE MOUNT
The QS16 is an IP56 surface mounted photoelectric cell, used for remote switching of lighting
MISCELLANEOUS
equipment. The maximum switching current is 15 amps, and the unit is MOV surge protected.
The body is UV resistant polycarbonate, with 2 x 25mm conduit entries top and bottom, and
1 x 25mm conduit entry each side. The unit also has a rear 20mm conduit entry. The screws are
self-captive stainless steel.
153
LAY-IN DIFFUSER PATTERNS
Optional Acrylic Lay-in Diffuser Patterns for commercial diffused range.
DIFFUSER PATTERNS
Note: References in this catalogue of diffuser material such as K12 refer to the pattern of the
diffuser and not any specific manufacturer's brand name.
K12
5mm square female prism pattern with the prisms diagonal
across the panel. The panel thickness is 2.5mm for 300mm
nominal wide luminaires & 2.8mm for 600mm nominally wide
K15
9.5mm square female prism pattern with the prism orientation
parallel and perpendicular to the length and width of the panel.
The panel thickness is 4.5mm. This panel is very rigid & is
particularly suitable for extra wide luminaires.
K19
4.7mm square male prism pattern with the prism orientation
parallel and perpendicular to the length and width of the
panel. The panel thickness is 4mm. This panel minimises lamp
images and provides low brightness at angles close to the
Y5 FINE RIB
Linear reeded embossed pattern with satin finish. Offers
excellent tube obscuration (reduces tube definition). An ideal
diffuser for high performance T5 luminaires, but also excellent
Y7 COARSE RIB
Linear reeded embossed pattern with satin finish. Offers
excellent tube obscuration (reduces tube definition). An ideal
diffuser for high performance T5 luminaires, but also excellent
154
BATTEN DIFFUSER PATTERNS
Optional formed Acrylic Diffuser Patterns for diffused batten range.
DIFFUSER PATTERNS
Prismatic
Slimline
Super Slimline
Shower Screen
Slimline
Super Slimline
Reeded
Slimline
Elara
155
LAY-IN DIFFUSER SELECTION GUIDE
If glare evaluation is a consideration for luminaire selection, the following tables may be used as a
DIFFUSER PATTERNS
guide to the comparative performance of the various diffuser panels.
This table may be used as a guide only and is based on a room size of 12m x 12m, with a ceiling height
of 2.7m, and reflection values of ceilings, walls & floors at 0.7, 0.5, and 0.2 respectively. As a general rule,
rooms under this size will have a reduced glare index while rooms above will have a slight increase in glare
index.
The table below shows examples of the types of applications where these maximum UGR glare values are
Maximum
Nature of task or interior UGR Examples of sustained tasks or associated interiors
and required glare control (glare index)
* For those applications for which a maximum UGR of 25 or more is recommended, the calculation of a glare
index is not normally justified. The use of the luminaire selection system (see Clause 8.3.4) will be sufficient.
† A greater degree of glare control, i.e. a UGR of less than 19, may be required for exceptionally difficult
visual tasks or where there is prolonged viewing of a task at or above a horizontal line of sight.
The glare evaluation system should be used if the room is large, where a significant number of luminaires are
in the field of view. This is normally rooms that have a room index of 2 or more. To calculate the room index
use the formula below.
156
HID HOT RESTRIKE TABLE
CONTROL GEAR RUN AND START CURRENTS FOR DAVIS LIGHTING PRODUCTS
HID HOT RESTRIKE TABLE
157
HIGHLIGHT
Davis Lighting was proudly awarded a single large order of 350,000 sets of the Davis SAT T5 fixtures to
replace public area lighting in the Singapore Government’s “Green Energy” initiatives for its island-wide
HDB precincts. Our manufacturing processes have attained and surpassed the stringent requirements of
the Productivity Standard Board (PSB) Laboratory of Singapore. This achievement epitomizes our constant
strive to achieve high quality products incorporating sophisticated engineering designs whilst providing cost
competitive solutions to our clients.
Australia Bangladesh
Head Office Brisbane: Dhaka:
Ph: +61 (7) 37128988 Millennium Technology Ltd.
Fax: +61 (7) 32728988 Ph: +880 (2) 8852911/2912/2913
Fax: +880 (2) 8852537
Email: australia@davislighting.com
E-mail: sales-davislighting@mtech-bd.com
Sales enquiries all states: 1300 851 001
Brunei
Sales Offices:
Bandar Seri Begawan:
Queensland
Morsjaya Electrical Co. Sdn Bhd
Email: qld@davislighting.com
Ph: +673 (2) 448469/448470
New South Wales Fax: +673 (2) 448471
Email: nsw@davislighting.com
E-mail: morsjaya@brunet.bn
Victoria
Papua New Guinea
Email: vic@davislighting.com
Port Moresby:
Western Australia ESCO Limited
Email: waus@davislighting.com Ph: +675 3255300
South Australia Fax: +675 3259020
Email: sa@davislighting.com E-mail: esco@pom.esco.com.pg
ACT Lae:
Illuminating Solutions ESCO Limited
Ph: +61 (2) 62474555 Ph: +675 4271933
Fax: +61 (2) 62474777 Fax: +675 4722043
Email: isbma@bigpond.com.au E-mail: wrev@lae.esco.com.pg
Malaysia Kokopo:
Head Office & Sales Kuala Lumpur ESCO Limited
Ph: +60 (3) 56364348 Ph: +675 9829154
Fax: +60 (3) 56364352 Fax: +675 9829170
E-mail: malaysia@davislighting.com E-mail: asmith@kpo.esco.com.pg
Sales Office Penang MT Hagen:
Ph: +60 (4) 5070580 ESCO Limited
Fax: +60 (4) 5070968 Ph: +675 5423075
E-mail: malaysia@davislighting.com Fax: +675 5422737
Fax: +84 (8) 622855 EMC Compliant Supplier Code N1562 (Aust) QUALITY
MANAGEMENT
074
Davis Lighting reserves the right to change specifications and materials without
Email: vietnam@davislighting.com prior notice. Materials and components may vary from region to region. MS ISO 9001 REG. NO. AR1248