Solution:
* Go to the work station and click the “Process Control” tab you will get a
“GENTRAN:Director Process Control” window.
* Then go to the “New” tab to get the “New Session” window. Enter a new session
name.
* Go to the “Ins” tab in the “GENTRAN:Director Process Control” window to get
the “Action Setup” window open.
* Open the “Action Setup” window and select the “Exec_Program” command.
* In the “Execute Program” text box browse the .bat file which is to be excuted.
* In the “Working Directory” browse the path of the input file.
* Next open the “Action Setup” window again and select the “GDW_Import” command.
* In the “File Name” text box give the path of the input file to be translated.
* Select the “File_Copy” command from the “Command” drop down box.
*Give the path and the name of the input file from the source folder.
*Give the path and the name of the input file from the target folder.
Note: This ends the creation of the required session. Next we need to create the
“Events” to execute the session.
* From the “Session” drop down select the session which you have created for this
event.
* The start time and the end time can be set up as required. The calendar can also be set
up.
* Then activate the event by clicking the “Activate” tab as shown below. You can also
manually execute the event by clicking the “Execute” tab.
************************************End********************************
Please find below the function of all the commands in the Process Control.
2. File_Copy : File_Copy command to copy an output file of your EDI data to your
hard drive.