XV-HTD510
SPEAKER SYSTEM
S-HTD510
Operating Instructions
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
IMPORTANT
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol, within CAUTION: The exclamation point within an equilateral
an equilateral triangle, is intended to alert the user TO PREVENT THE RISK OF ELECTRIC SHOCK, DO triangle is intended to alert the user to the
to the presence of uninsulated "dangerous voltage" NOT REMOVE COVER (OR BACK). NO USER- presence of important operating and
within the product's enclosure that may be of SERVICEABLE PARTS INSIDE. REFER SERVICING maintenance (servicing) instructions in the
sufficient magnitude to constitute a risk of electric TO QUALIFIED SERVICE PERSONNEL. literature accompanying the appliance.
shock to persons.
Information to User
Alteration or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
GROUND CLAMPS
Fig. A
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
IND
NIC U
O
ELECTR
ST
EST 1924
•
•
SS
A
O CIATIO We
Want You
LISTENING
For A Lifetime Used wisely, your new sound equipment will provide a
lifetime of fun and enjoyment. Since hearing damage from
loud noise is often undetectable until it is too late, this
Selecting fine audio equipment such as the unit you’ve just manufacturer and the Electronic Industries Association’s
purchased is only the start of your musical enjoyment. Now Consumer Electronics Group recommend you avoid prolonged
it’s time to consider how you can maximize the fun and exposure to excessive noise. This list of sound levels is
excitement your equipment offers. This manufacturer and the included for your protection.
Electronic Industries Association’s Consumer Electronics Decibel
Group want you to get the most out of your equipment by Level Example
playing it at a safe level. One that lets the sound come through 30 Quiet library, soft whispers
loud and clear without annoying blaring or distortion-and, 40 Living room, refrigerator, bedroom away from traffic
most importantly, without affecting your sensitive hearing. 50 Light traffic, normal conversation, quiet office
60 Air conditioner at 20 feet, sewing machine
Sound can be deceiving. Over time your hearing “comfort 70 Vacuum cleaner, hair dryer, noisy restaurant
level” adapts to higher volumes of sound. So what sounds 80 Average city traffic, garbage disposals, alarm clock
“normal” can actually be loud and harmful to your hearing. at two feet.
Guard against this by setting your equipment at a safe level
BEFORE your hearing adapts. THE FOLLOWING NOISES CAN BE
DANGEROUS UNDER CONSTANT EXPOSURE
To establish a safe level: 90 Subway, motorcycle, truck traffic, lawn mower
÷ Start your volume control at a low setting. 100 Garbage truck, chain saw, pneumatic drill
÷ Slowly increase the sound until you can hear it comfortably 120 Rock band concert in front of speakers, thunderclap
and clearly, and without distortion. 140 Gunshot blast, jet plane
180 Rocket launching pad
Once you have established a comfortable sound level:
÷ Set the dial and leave it there. Information courtesy of the Deafness Research Foundation.
IND
Taking a minute to do this now will help to prevent hearing O
NIC U
ELECTR
ST
We
for a lifetime. EST 1924 Want You
•
•A
SS
O CIATIO LISTENING
For A Lifetime
Contents
1 Before You Start 6 Using Surround Sound Language settings 36
Adjusting the bass and treble 23 OSD language 36
Features 6
Using P.Bass 23 Audio Language 37
What’s in the box 6
Using sound modes 23 Subtitle Language 37
Using this manual 6
Listening to surround-sound Auto Language 37
Putting the batteries in
sources 23 DVD Language 38
the remote control 7
Listening to other sources with Subtitle Display 38
Using the remote control 7
room effects 24 Subtitle Off 38
Hints on installation 7
Adjusting the effect level 24 General settings 38
Avoiding problems with
Listening at low volume 25 Setup Menu Mode 38
condensation 8
Direct recording 25 Parental Lock 39
Moving the system 8
Changing the parental lock level 39
Discs compatible with this system 8
Changing your password 39
DVD Video regions 8 7 Playing Discs Screen Saver 40
Introduction 26 Background Color 40
2 Connecting Up Finding what you want on a disc 26
Connecting the speakers 9 Switching camera angles 26
11 Additional Information
Placing the speakers 10 Switching subtitles 26
Switching audio language 26 Switching the AM frequency
Wall mounting the rear speaker
Switching audio channel 26 interval 41
system 10
Making a program list 27 Setting the display brightness 41
Connecting to your TV 11
More programming options 28 Switching the time format 41
Connecting the supplied antennas 12
Using random play 28 Taking care of your system 41
AM loop antenna 12
Using repeat play 28 Disc lens cleaner 41
FM wire antenna 12
Looping a section of a disc 29 Taking care of your discs 41
Connecting external antennas 12
Playing CDs only (CD Mode) 29 Storing discs 42
External AM antenna 12
Bookmarking a place in a disc 29 Discs to avoid 42
External FM antenna 12
Memorizing disc settings 30 Glossary 42
Connecting other components 13
Displaying disc information 30 Language code list 43
Connecting the power 13
Troubleshooting 45
Resetting the system 45
3 Controls & Displays 8 Using the Timer Switching the demo mode on/off 45
Remote control 14 Using the wake up timer 31 Screen sizes and disc formats 46
Front panel 15 Activating/deactivating the Specifications 47
Display 15 wake up timer 31
Checking the timer settings 32
Using the sleep timer 32
4 Setting Up
Switching on and setting the clock 16
Setting up for surround sound 16 9 Advanced Sound Setup
Setting the speaker distances 16 Advanced sound settings 33
Balancing the surround sound 17 LFE attenuator 33
Using the Setup Navigator 18 Dynamic Range Control 33
Dual-mono setting 34
Adjusting channel volume levels 34
5 Getting Started
Playing DVDs, CDs and Video CDs 19
Basic playback controls 19 10 DVD Setup Menu
Navigating DVD disc menus 20 Using the DVD Setup menu 35
Navigating Video CD PBC menus 20 Video settings 35
Exchanging discs 21 TV Screen 35
Listening to the radio 21 Picture Quality 35
Improving FM stereo sound 22 S-Video Out 36
Saving station presets 22 Still Picture 36
Listening to station presets 22 On Screen Display 36
Listening to other components 22 Angle Indicator 36
1 Before You Start
6
En
Before You Start 1
Hints on installation
We want you to enjoy using this unit for years to come,
3 Close the cover. so please bear in mind the following points when
choosing a suitable location for it:
Do...
✓ Use in a well-ventilated room.
✓ Place on a solid, flat, level surface, such as a table,
shelf or stereo rack.
Don’t...
• Remove the batteries if the remote is not going to be
✗ Use in a place exposed to high temperatures or
used for a month or more.
humidity, including near radiators and other heat-
• Remove dead batteries promptly—they can leak generating appliances.
and damage the unit.
✗ Place on a window sill or other place where the
• When disposing of used batteries, please comply system will be exposed to direct sunlight.
with governmental regulations or environmental public
✗ Use in an excessively dusty or damp environment.
institution’s rules that apply in your country or area.
✗ Place directly on top of an amplifier, or other
component in your stereo system that becomes hot in
use.
7
En
1 Before You Start
FRONT REAR
L L L
FRONT REAR
L L
R
R
R R
R AC INLET
SUB- CENTER
WOOFER
SPEAKERS
COAX
DIGITAL R L
IN
ANTENNA
TV/
VCR
IN
H
AM
VIDEO LOOP
OUT IN ANTENNA
1 S-VIDEO
AUX
FM
UNBAL
OUT OUT 75Ω
SUB-
WOOFER SPEAKERS CENTER
Front R Front L
H
1
H
Rear R Rear L
The speaker terminal tabs and supplied speaker cables 1 Twist off the protective covers on the
are color-coded for simpler connection. ends of the speaker
cable.
1 Use the speaker cables with the red
sleeves to connect the front speakers to
the FRONT L and FRONT R terminals. 2 Press the speaker terminal tabs to open
2 Use the speaker cables with the blue and insert the wire with the colored
sleeves to connect the rear speakers to sleeve into the colored terminal and the
the REAR L and REAR R terminals. other wire into the black terminal.
3 Use the speaker cable with the grey 3 Release the speaker terminal tabs to
sleeves to connect the subwoofer to the secure the
Colored tab
SUBWOOFER terminals. speaker cable.
Colored sleeve
Black tab
Colored tab
9
En
2 Connecting Up
Do not connect any of the supplied speakers to any The front and center speakers supplied with this system
other amplifier. This may result in malfunction or fire. are magnetically shielded. However, placing them
This DVD receiver has been designed for best perfor- extremely close to a television may result in color
mance when connected to the supplied speakers. We do distortion on the screen. If this happens, move the
not, therefore, recommend that you connect and use speakers a little further away and switch off the
other speakers with this system. television for 15–30 minutes.
The rear speakers and subwoofer are not magnetically
Placing the speakers shielded, so they should not be placed near a TV or
Where you put your speakers in the room has a big monitor.
effect on the quality of the sound. The following
guidelines should help you to get the best sound from Wall mounting the rear speaker system
your system. Before mounting
• The subwoofer can be placed on the floor. Ideally, • Remember that this speaker system is heavy and
the other speakers should be at about ear-level when that its weight may cause the wood screw to work loose
you’re listening to them. Putting the speakers on the or the wall to fail to support it, in which case the
floor (except the subwoofer), or mounting them very speaker system may fall on the floor. This is extremely
high on a wall is not recommended. dangerous. Make absolutely sure that the wall is sturdy
• For the best stereo effect, place the front speakers 2– enough to support the weight of the speaker system. Do
3m (6–9ft.) apart. not mount it on plywood boards or soft-surface walls.
• The rear speakers should not be further away from The mounting screws are not included with this
your listening position than the front speakers. unit. Please find the correct screws for your
application.
• The center speaker should be as close as possible to
the TV screen so that movie dialog is localized properly. Wall-mounting bracket
Center TV
Front L Front R
Subwoofer Wood screw
Rear L Rear R
Protrude:5-7mm
Connecting to your TV
FRONT REAR
L L COAX
DIGITAL R
R R
IN TV/ AC INLET
VCR
H
VOLTAGE
SUB-
WOOFER CENTER
IN SELECTOR
SPEAKERS 240V
COAX 220-
DIGITAL R L
IN TV/ 230V
VIDEO
IN
H 110-
127V
AM
OUT VIDEO
OUT IN
IN
LOOP
ANTENNA
1 AUX
1
FM
S-VIDEO UNBAL
OUT OUT 75Ω
AUX H
S-VIDEO
OUT OUT
H
VIDEO
IN
S-VIDEO
IN
11
En
2 Connecting Up
Connecting the supplied antennas It’s also possible to fix the AM antenna to a wall. When
installing on a wall or other surface, perform steps 4
FM wire and 5 after first securing the stand with screws. Before
antenna AM loop antenna fixing, make sure that the reception is satisfactory.
FM wire antenna
FRONT REAR
L L L
ANTENNA
AC INLET
VOLTAGE
SELECTOR
SUB-
WOOFER SPEAKERS CENTER AM 240V
DIGITAL
IN
COAX
TV/
R L
ANTENNA LOOP 220-
230V
1
AM
VIDEO LOOP
OUT IN ANTENNA
AUX
FM
S-VIDEO
OUT OUT
UNBAL
75Ω FM
H UNBAL
75Ω
AM loop antenna
Connecting external antennas
1 Pull off the protective shields of both AM
antenna wires. External AM antenna
2 Press the antenna terminal tabs to open Use 5–6 meters (15–18 ft.) of vinyl-insulated wire and
and insert one wire into each terminal. set up either indoors or outdoors. Leave the supplied AM
loop antenna connected.
3 Release the tabs to secure the AM an-
tenna wires.
Outdoor
4 Bend the stand in the direction indicated AM antenna
by the arrow.
5 Clip the loop onto the stand. Indoor
6 Place the AM antenna on a flat surface AM antenna
and point in the direction giving the best
H
reception. AM
LOOP
ANTENNA
4 5 5
External FM antenna
Use 75Ω coaxial cable to hook up an external FM
antenna. Do not leave the supplied FM wire antenna
attached.
12
En
Connecting Up 2
FRONT REAR
OAX
L L L R L
R R R
TV/
VCR AC INLET
IN
H
VOLTAGE
SELECTOR
SUB-
WOOFER SPEAKERS CENTER 240V
COAX 220-
DIGITAL R L
IN TV/ 230V
VCR
IN
H 110-
127V
AM
VIDEO
OUT IN IN
LOOP
ANTENNA
1
1
AUX
FM
UNBAL
AUX
S-VIDEO
OUT OUT 75Ω
OUT
H
Tape deck, VCR,
MD recorder, etc.
OUT (PLAY)
Analog
IN (REC)
L L L
SUB-
WOOFER
R
SPEAKERS CENTER
R
AC INLET
VOLTAGE
SELECTOR
240V
COAX
AUX
S-VIDEO
OUT OUT
FM
UNBAL
75Ω AC INLET
H
H
The DIGITAL IN COAX jack 1 should only be connected
to a PCM audio output (32, 44.1 or 48kHz). These H
include CD, MD and DAT players and satellite receivers.
Check the instructions that came with your other
component for more details.
13
En
3 Controls & Displays
5 6 7 8 displays.
— VOLUME + 9 10
19 SOUND Page 24
DVD SETUP
5
SYSTEM SETUP 20 7 Page 19
11 12 13
21 3/8 Page 19
2 ENTER 3 14 15 16
TOP MENU 22 RETURN Page 20
∞ 17 18 19
23 4 / –PREV Pages 19-20
MENU SOUND
RETURN
7
— PREV
6
e STEP/SLOW E NEXT +
20 21 22
24 1 / STEP/SLOW e Pages 19-20
4
CONDITION
1
LAST MEMO
¡
SEARCH
¢
DVD DISP
23 24 25 26 25 ¡ / STEP/SLOW E Pages 19-20
1 2 3 CLEAR 27 28 29 30 26 ¢ / NEXT+ Pages 19-20
ANGLE MONO SLEEP FL DIMMER
39 40 41 42
29 3 / SEARCH (SHIFT & 3) Page 26
DISC 1 DISC 2 DISC 3 DISC SKIP 30 CLEAR Clears/cancels various functions
43 44 45 46
SHIFT DISC 4 DISC 5
OPEN/
CLOSE DVD DISP (SHIFT & CLEAR) Page 30
0 47 48 49 50
31 4 / ANGLE (SHIFT & 4) Page 26
32 5 / MONO (SHIFT & 5) Page 22
33 6 / SLEEP (SHIFT & 6) Page 32
34 >10 Selects numbers over 10 Page 20
FL DIMMER (SHIFT & >10) Page 41
35 7 / PROGRAM (SHIFT & 7) Page 28
36 8 / RANDOM (SHIFT & 8) Page 28
37 9 / REPEAT (SHIFT & 9) Page 28
38 REP A–B (SHIFT & 10/0) Page 29
1 DVD/CD Pages 19, 31 10/0 Number button (10 and 0)
2 TUNER/BAND Pages 21-22, 31 39 CD MODE Page 29
3 TV/AUX Pages 22, 31 40 AUDIO Page 26
4 STANDBY/ON Page 19 41 SUBTITLE Page 26
5 MUTE Silences/restores all sound. 42 SYSTEM DISP Page 16
6 TEST TONE/CH LEVEL Page 17 43 DISC 1 Page 20
7 SURROUND MODE Pages 17, 24 44 DISC 2 Page 20
8 DSP Page 24 45 DISC 3 Page 20
9 VOLUME – Lowers the volume. 46 DISC SKIP Pages 19, 21
10 VOLUME + Raises the volume. 47 SHIFT Hold down to access secondary button functions
11 DVD SETUP Pages 18, 35 48 DISC 4 Page 20
12 Cursor up Use for navigating menus and on-screen 49 DISC 5 Page 20
displays. 50 OPEN/CLOSE 0 Pages 19, 21
13 SYSTEM SETUP Pages 16, 22, 31-34, 41
14 Cursor left Use for navigating menus and on-screen
displays.
14
En
Controls & Displays 3
Front panel
1 2 3 4 5 6
1 2 3 4 5
VIDEO
VOLUME
STANDBY/ON
1
DVD/CD TUNER/BAND TV/AUX CD MODE 7 3/8 4.1 ¡.¢
PHONES
18 17 16 15 14 13 12 11 10 9 8 7
Display
1 2 3 4 5 6 7 8 9 10 11 12
17 16 15 14 13
15
En
4 Setting Up
2 ENTER 3
once.
∞
SYSTEM DISP
– VOLUME +
SYSTEM SETUP
5
2 ENTER 3
SHIFT
16
En
Setting Up 4
17
En
4 Setting Up
Language English
OSD Language français
Español
Select the On Screen Language
DVD SETUP
Move ENTER Select SETUP Exit
5
2 ENTER 3
TV Connection
TV Type Widescreen (16:9)
Standard (4:3)
Widescreen TV
16:9 aspect ratio
Move ENTER Select SETUP Exit
Also turn on your TV and make sure that it is set to the Save Changes
Exit Setup Navigator Delete Changes
correct video input. Changes are saved
Start Again
• If a disc that’s already loaded starts to play, press 7 Move ENTER Select SETUP Exit
to stop it.
7 Press DVD SETUP to exit.
2 Press DVD SETUP. Congratulations, set up is complete!
The Setup Navigator on-screen display (OSD) appears:
If you want to use the Setup Navigator again at any
Video Language General time, it is available from the General menu. Also,
Setup Navigator
each individual setting can be changed using the
Setup Navigator Start
Auto Start Off
appropriate menu option—chapter 10 explains all
Setup using the Setup Navigator menu options in detail.
Move ENTER Select SETUP Exit
18
En
Getting Started 5
Playing DVDs, CDs and Video CDs • Do not place discs in the two partially accessible
The basic controls for playing discs are covered here. disc spaces, as it’s easy to misalign them. Use only the
Further functions are detailed in the chapter 7. front-most space.
• When using the DISC SKIP button, wait until the
disc tray has come to a complete stop before loading a
DVD
/CD
STANDBY
/ON
disc; the player may malfunction if a disc is caught in
DSP the disc tray mechanism.
— VOLUME
5
+
• Do not rotate the disc tray by hand. Always use the
2 ENTER 3 DISC SKIP button.
TOP MENU
MENU ∞
1 2 3 just loaded.
4
7
5
8
6
9
>10
10/0
• If you’re playing a DVD or Video CD, a menu may
DISC 1 DISC 2 DISC 3 DISC SKIP
appear. See page 20 for how to navigate these.
OPEN/
SHIFT DISC 4 DISC 5 CLOSE
0
tray.
1 Press & hold for fast reverse scanning.
4 Load a disc. (After 5 seconds, scanning continues even
after releasing the button: press 6 to
resume normal playback.)
On the front panel use: 4·1
19
En
5 Getting Started
Numbers If the disc is stopped, playback starts from Navigating DVD disc menus
the selected track or title number. If the
disc is playing, playback jumps to the start Some DVD discs contain menus. Sometimes these are
of the selected track or chapter number. displayed automatically when you start playback; others
only appear when you press menu or top menu.
>10 Selects tracks/titles/chapters 11 and over.
(For example, for 24, press >10 , 2, 4.) Button What it does
DISC 1–5 Starts playing the selected disc. TOP MENU Displays the ‘top menu’ of a DVD disc—
(SHIFT MENU) this varies with the disc.
(On the front panel use: 1–5)
20
En
Getting Started 5
SYSTEM SETUP
2 ENTER 3
1 ¡
1 2 3
MONO
4 5 6 >10
7 8 9 10/0
accessible disc spaces. Do not try and load discs into any
of the other spaces; they may not load correctly and
cause the unit to malfunction.
2 Tune to a station.
There are three ways to do this:
• Automatic tuning
To search for stations in the currently selected band,
press and hold either the 1 or ¡ button for about
a second. The system will start searching for the next
station, stopping when it has found one. Repeat this step
to search for other stations. Every time searching stops
on a station, the (tuned) indicator lights in the
display.
21
En
5 Getting Started
22
En
Using Surround Sound 6
23
En
6 Using Surround Sound
24
En
Using Surround Sound 6
25
En
7 Playing Discs
1 Press PROGRAM (SHIFT & 7). For example, to enter title/track 6, press 6. To enter
title/track 14, press 1, 4.
Step Disc Title
Track Chap Program
1 1 Disc 1
2
DVD
VCD
• To clear an entry, press CLEAR.
2
3 ???
3
4
4
5
DVD
CD
• DVD only: If you want to put the whole title into the
5
6 program list, jump to step 5 below.
4 ¢ Page
Move PLAY Play PROGRAM Exit
4 If the current disc is a DVD, move the
The program screen appears showing the first six steps cursor to the CHAPTER field and enter a
in the playlist. Navigate around this screen using the chapter number.
cursor buttons. Jump to the next six steps using the Title Program
¢ button; to the previous six steps using the 4
Step Disc Track Chap
1 1 6 10 Disc 1 DVD
2 Title 6
button. 3
4
Total 10 Chapter
5
6
2 Enter a disc number (1 to 5). 4 ¢ Page
Move PLAY Play PROGRAM Exit
You can use either the DISC1–5 buttons, or the
number buttons.
5 Press ENTER.
• If this is the first step you’re programming, the The cursor moves down to the disc number field in the
number of the disc that is currently in the play position next step.
will appear automatically.
• If the unit has already read the contents of the disc 6 Repeat steps 2-5 to add more items to
you want to program, the disc details appear in the box the program list.
on the right of the screen (type of disc, number of titles/ 7 Press 6 to start the program list
chapters/tracks, etc.). If the unit hasn’t yet read the disc playing.
then ‘? ? ?’ appears in the box for disc type.
• If you want to put the whole disc into the program
list, jump to step 5 below.
• To edit any item in the program list, position the
cursor on the item you want to change, then enter a
new value using the number buttons.
• To delete a whole step, position the cursor anywhere
on the step you want to delete and press CLEAR.
27
En
7 Playing Discs
28
En
Playing Discs 7
2 Press 6.
• Track Repeat The player automatically starts playing the first CD
• 1 Disc Repeat loaded. Once all the CDs loaded have played, the player
• All Discs Repeat automatically stops.
• Repeat off
• The Repeat All function repeats all tracks on all
audio and Video CDs loaded. If, during repeat play, the • In CD Mode, use the DISC SKIP button to rotate
unit encounters a DVD disc, it will start playing, but the the disc tray to the next CD loaded (if there is one).
repeat mode will be canceled. • You can use repeat and random play in CD Mode
(see page 28 and this page).
2 To resume normal playback, press CLEAR.
1 Press CD MODE.
The CD Mode indicator lights. • Bookmarking also works with Video CD, but for one
• To switch off, press CD MODE again. disc only, and you must leave the disc in the player—
opening the disc tray erases the memory. Last Memory
29
may not work reliably with some PBC Video CDs. En
7 Playing Discs
playback. CD/Video CD
• To recall memorized settings, just load • To display the time remaining on a DVD disc, press
the disc. and hold DVD DISP (SHIFT & CLEAR).
The display shows CONDITION and Condition The display shows the disc time remaining for as long
Memory appears on-screen. as you hold the button. Release the button to revert to
• To clear memorized settings, load the disc and press the previous display.
CLEAR while Condition Memory is displayed on-
screen.
30
En
Using the Timer 8
31
En
8 Using the Timer
32
En
Advanced Sound Setup 9
4 Press ENTER.
33
En
9 Advanced Sound Setup
34
En
DVD Setup Menu 10
DVD SETUP
Video Language General
5
TV Screen 4:3(Letter Box)
2 ENTER 3 Picture Quality 4:3(Pan&Scan)
∞
16:9(Wide)
RETURN
yellow for DVD and Video CD; green for any type of disc. TV Screen – 16:9(Wide)
Picture Quality Cinema
Animation
Standard
35
En
10 DVD Setup Menu
Language settings
The player uses one of two processes when displaying a
still frame from a DVD disc. The default Auto setting lets OSD Language
the system decide which to use. • Set in Setup Navigator (default: English)
Field – produces a stable, generally shake-free image.
Video Language General
Frame – produces a sharper image, but more prone to OSD Language English
English
Audio Language - English
shake than field stills. français
Subtitle Language - Japanese
Español
Auto Language – On
36
En
DVD Setup Menu 10
Audio Language disc, the system automatically plays the disc with those
• Default Setting: English subtitles (although this depends on the Auto Language
setting—see Auto Language on page 37).
Video Language General
OSD Language — English
Video Language General
Audio Language - English
English
Subtitle Language - Japanese
French Subtitle Language
Auto Language - Japanese
Spanish List of Languages Code (0~2)
Other
Setup audio language ja: Japanese 1 0 0 1
Setup audio language
Move SETUP Exit Setup audio
Setup disc’s language
subtitle language
Move RETURN Return
+/– ENTER Select SETUP Exit
ja: Japanese 1 0 0 1
You can change or switch off the subtitles on a DVD disc
Setup audio
Setup audio language
language
any time during playback using the SUBTITLE button.
Move
+/–
RETURN Return
ENTER Select SETUP Exit
(This does not affect this setting.)
38
En
DVD Setup Menu 10
You can restrict access to certain discs using this feature. Move
+/– RETURN Return SETUP Exit
Once set, the player will ask for a four-digit password if a
restricted disc is loaded, giving you a degree of control
The first time you set the parental lock level, you have
over what your children watch.
to register a password. Anything you input becomes your
The player can be set to one of eight levels. Setting the password.
level at 1 means that any disc with any level of
restriction will need the password in order to watch it, 3 Select a new level.
while setting it at level 8 gives unlimited access.
Video Language General
DVD discs are also rated from 1 to 8. Discs rated 1 (or Parental Lock: Level Change
with no rating) generally contain little or no offensive
Level 1 2 3 4 5 6 7 8
material; discs rated 2, may contain material that some Set Parental Lock
parents may feel is unsuitable for children. Discs rated 8 RETURN Return
Move
will almost certainly be unsuitable for children. ENTER Select SETUP Exit
ENTER
Move
+/– RETURN Return SETUP Exit
39
En
10 DVD Setup Menu
3 Input a new password, then press ENTER. Select Other if you want to make your own back-
ground color. Follow the on-screen display to create a
Video Language General color from the red, green and blue bars.
Parental Lock: Password Change
Move
+/– RETURN Return SETUP Exit
Screen Saver
• Default setting: Off
Background Color
• Default setting: Blue
40
En
Additional Information 11
41
En
11 Additional Information
Glossary
Aspect ratio
The width of a TV screen relative to its height. Conven-
tional TVs are 4:3 (in other words, the screen is almost
square); widescreen models are 16:9 (the screen is
almost twice as wide as it is high).
Chapter
Just as a book is split up into several chapters, a title on
a DVD disc is usually divided into chapters. See also
Title.
Dolby Digital
A surround sound system developed by Dolby Laborato-
ries containing up to six channels of digital audio
(front left and right, surround left and right, center and
low-frequency channels). See also DTS.
42
En
Additional Information 11
43
En
11 Additional Information
Troubleshooting
Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this
component, check the points below. Sometimes the trouble may lie in another component. Inspect the other components
and electrical appliances being used. If the trouble cannot be rectified after checking the items below, ask your nearest
Pioneer authorized service center or your dealer to carry out repair work.
Problem Remedy
CDs, DVDs and Video CDs
The disc is ejected automati- • Check that the disc is clean and undamaged (page 41, 42).
cally after loading. • Make sure that the disc is seated properly in the disc guide.
• Check that the disc has a compatible region number (page 8).
• There may be condensation inside the unit. Allow time for condensation to evaporate.
Avoid using the player near an air-conditioning unit.
Playback is not possible. • Check that the disc is loaded correctly (label side face up).
mark appears on screen. • The selected function does not operate for that disc.
When making changes in the • There is a CD or Video CD loaded and the setting that was changed applies only to
Setup OSD menus, is DVD discs. The settings will take effect next time a DVD is loaded.
displayed.
Picture playback stops and • Switch the power off once, then on again using the front panel standby/on switch.
the operation buttons cannot
be used.
New settings made in the • Some settings can be changed while a disc is playing, but are not effective until the
Setup screen menus while a disc is stopped then restarted. This is not a malfunction. Note that making settings in the
disc is playing are ineffective. Setup screen menus may cancel the resume function.
Settings are canceled. • If the power was cut due to power failure or by unplugging the power cord, settings
will be canceled.
No picture/No color. • Check that the video connections are correct and that plugs are inserted fully.
• Check that the TV/monitor settings are correct.
Screen is stretched or aspect • Make sure that the TV Screen option in the Setup menu matches the TV/monitor
does not change. you're using.
Picture disturbance during • This player is compatible with Macro-Vision System copy guard. Some discs include a
playback or screen is dark. copy prevention signal, and when this type of disc is played back, stripes etc., may appear
on some sections of the picture depending on the TV. This is not a malfunction.
• Problems with some discs may result in the screen becoming black for a brief instant
or shaking slightly when certain functions are executed.
• Due to copy protection, connection of this system through a VCR or an AV selector
may prevent recording or cause picture problems. This is not a malfunction.
44
En
Additional Information 11
Problem Remedy
Noticeable difference in DVD • DVDs and CDs use different recording methods. This is not a malfunction.
and CD volume.
Tuner
Noisy radio reception • Check that the frequency is correct.
• Check that the antennas are connected properly. For FM, make sure that the antenna
is fully extended and positioned to give the best reception.
For AM, make sure that the loop antenna is pointing in the best direction.
• If the radio signal is weak, an outdoor antenna will usually give better results than the
supplied indoor types.
• Other electrical equipment, such as TVs, fluorescent lamps and motors can cause
interference. Try switching off or moving the equipment, or moving the antenna(s).
• The tuning interval may be incorrect for your country or region. Try switching the
tuning interval (page 41).
Auto tuning does not pick up • Auto tuning will only detect radio stations with a good signal. For more sensitive
some stations. tuning, connect an outdoor antenna.
General
The remote control doesn't • Make sure that you’re using the remote within its operating range and that there are
seem to work. no obstacles between the remote and the sensor on the main unit.
• Check that the batteries are not exhausted.
No audio, or audio is dis- • Check that the correct function is selected (DVD/CD, etc.), the volume turned up.
torted. • Check that the MUTE function is not on and that the disc is not paused.
• Check that the disc is clean and undamaged (page 41-42).
• Check that all rear panel connections are correct.
• If you find dirty or oxidized plugs/terminals, clean them.
Can’t adjust sound mode • The Record Mode is switched on. Switch off then adjust as desired (see page 25).
settings (bass, treble, etc.)
Setting and appearance Screen format of disc Setting and appearance Screen format of disc
Widescreen (movies, etc.) Standard (TV programs, etc)
Note that some extra-wide The program is presented
formats (such as CinemaScope) correctly, regardless of the
will appear with black bars at the setting.
top and bottom of the screen.
16:9 (Wide)
46
En
Additional Information 11
800–421–1404
Please do not ship your product to Pioneer without first calling the Customer Service Department at the above listed
number for assistance.
For warranty information please see the Limited Warranty sheet included with your product.
Should this product require service in Canada, please contact a Pioneer Canadian Authorized Dealer to locate the nearest
Pioneer Authorized Service Company in Canada.
Alternatively, please contact the Customer Service Department at the following address:
For warranty information please see the Limited Warranty sheet included with your product.
Si ce produit doit être réparé au Canada, veuillez vous adresser à un distributeur autorisée Pioneer au Canada pour obtenir
le nom de la Société de Service Autorisée Pioneer le plus près de chez vous. Ou encore, veuillez communiquer avec le
Service de Clientèle de Pioneer:
Pour obtenir des renseignements sur la garantie, veuillez vous reporter au feuillet sur la Garantie Limitée qui accompagne
le produit.