0 penilaian0% menganggap dokumen ini bermanfaat (0 suara)
103 tayangan3 halaman
This document is a resume for Raja Sherin that summarizes his objective, education, skills, and projects. His objective is to obtain an entry-level position as an air conditioning engineer. He has a Master's degree in Mechatronics Engineering and Bachelor's degrees in Mechanical Engineering and Diploma in Mechanical Engineering. His skills include mechanical engineering, mechatronics, software like AutoCAD and LabVIEW, and operating systems. He has experience with projects related to metal matrix composites casting, hydraulic bike stands, thermo cutters, and wood cutters during his studies.
This document is a resume for Raja Sherin that summarizes his objective, education, skills, and projects. His objective is to obtain an entry-level position as an air conditioning engineer. He has a Master's degree in Mechatronics Engineering and Bachelor's degrees in Mechanical Engineering and Diploma in Mechanical Engineering. His skills include mechanical engineering, mechatronics, software like AutoCAD and LabVIEW, and operating systems. He has experience with projects related to metal matrix composites casting, hydraulic bike stands, thermo cutters, and wood cutters during his studies.
Hak Cipta:
Attribution Non-Commercial (BY-NC)
Format Tersedia
Unduh sebagai DOC, PDF, TXT atau baca online dari Scribd
This document is a resume for Raja Sherin that summarizes his objective, education, skills, and projects. His objective is to obtain an entry-level position as an air conditioning engineer. He has a Master's degree in Mechatronics Engineering and Bachelor's degrees in Mechanical Engineering and Diploma in Mechanical Engineering. His skills include mechanical engineering, mechatronics, software like AutoCAD and LabVIEW, and operating systems. He has experience with projects related to metal matrix composites casting, hydraulic bike stands, thermo cutters, and wood cutters during his studies.
Hak Cipta:
Attribution Non-Commercial (BY-NC)
Format Tersedia
Unduh sebagai DOC, PDF, TXT atau baca online dari Scribd
E 5-96, Theri vilai Mulagumoodu 629167 9994880252 sherinraja@gmail.com
Objective: An entry-level position in Air Conditioning Engineer, with opportunity for
advancement.
Summary:
Skilled in refrigeration and air conditioning.
Experienced in LFC design and labVIEW programming, Hydraulics and Pneumatics circuit design. Hard worker and excellent team player with proven ability to adopt industrial environment.
Education:
Anna University Coimbatore, Kongu Engineering college Erode
Masters of Engineering in Mechatronics Engineering June 2010
Anna University Chennai, C.S.I.Instute of technology Nagercoil
Bachelor of Technology in Mechanical Engineering May 2008
Directorate of Technical Education, Morning star polytechnic college Nagercoil
Diploma in Mechanical Engineering June 2004
Project Details:
Kongu Engineering college Erode, Tamil Nadu
ME Final Year project December 2009 to June 2010 Studies on the castings of metal matrix composites (A356 + SiC) using lost foam casting Software used: Lab VIEW 8.2.
• To make intricate castings of particulate aluminium MMC (A356+SiC), an attempt
has been made using lost foam casting process. • The solidification behavior of MMC and mould filling time are measured using Virtual Instrumentation. • Tensile test and microstructure studies are carried out from the samples of castings and compared with A356 Castings. • The tensile strength of the MMC is more than the A356 castings. • From the microstructure that the sic particles are uniformly distributed in the aluminium metal matrix. Anna University Chennai, C.S.I.Instute of technology Nagercoil, Tamil Nadu BE Final Year Project January 2008 to May 2008 Hydraulic Bike stand • To stand and release the vehicle with less manual effort. • Two buttons are used for stand and release the vehicle. • Battery operated gear pump and piston is used to stand and release the vehicle. • Hydraulic fluid is act as a medium to transfer power from master cylinder to gear pump and gear pump to piston. • It requires only an oil sump, gear pump and piston cylinder arrangement.
Anna University Chennai, C.S.I.Instute of technology Nagercoil, Tamil nadu
BE Design and Fabrication Project November 2006 to April 2007 Modern thermo cool cutter • To cut intricate shapes in polystyrene material with reduced time, increase in accuracy and reduce material wastage. • 6V DC supply is used to heat and cut the thermo cool material. • Nicrom thin wire is used to cut the thermo cool material and it is arranged linear and centre of the table. • Required profile can be cut easily and quickly.
Directorate of Technical Education Nagercoil, Tamil Nadu
Diploma project November 2004 to April 2005 Multiple wood cutter. • To reduce the risk for wood cutting and material wastage. • To done several operations at a time. • Sawing, Drilling and polishing can be done in a single machine tool. • All the tools are connected in a single shaft and Journal bearing is also used to hold the shaft.