Faisal Nurahman 2111093
Faisal Nurahman 2111093
• 2 dan 7
c. 6.6 Dengarkan lagi dan jawab pertanyaan berikut.
1) tata letak dan komponen printer baru harus jauh berbeda dari desain yang ada? Kenapa
tidak)?
• Tidak. Desain yang ada terbukti efektif. Perusahaan tidak memiliki sumber daya untuk
melakukan perubahan mendasar pada proses produksi.
2) Berapa kali model yang ada telah diperbaiki di masa lalu?
• Sekali
3) Pertimbangan apa di balik keputusan tentang seberapa berbedanya perangkat lunak
baru itu?
• Perangkat lunak telah menjadi kelemahan utama dari model yang ada.
4) Sejauh mana perbedaan sistem perangkat lunak baru dari yang sudah ada?
• Secara signifikan - perlu lebih sederhana untuk digunakan
d. Lihatlah kata kerja berikut dari diskusi dan temukan tiga contoh yang berarti lagi. Cocokkan
tiga kata kerja lainnya dengan definisi di dalam kotak.
1) Desain ulang = desain lagi
2) Temukan kembali = balikkan lagi
3) Refine = perbaiki detailnya
4) Revamp = tingkatkan secara keseluruhan
5) Rethink = pikirkan lagi
6) Tetap = tinggal
e. 6.6 Lengkapi ungkapan berikut dari diskusi menggunakan kata-kata di kotak. Dengarkan dan
periksa jawaban Anda.
1) Temukan kembali roda
2) Mendesain semuanya dari awal
3) ruang untuk perbaikan
4) tumit achilles
5) kembali ke papan gambar
6) memimpin kuantum
7) mendesain sistem dari awal
f. Cocokkan ekspresi (1-6) dalam Latihan 12e dengan definisi (a-f).
a) buang waktu untuk membuat ulang sesuatu yang telah dibuat (1)
b) kelemahan terbesar (4)
c) mulai lagi karena rencana pertama gagal (5)
d) membuat kemajuan besar (6)
e) desain dari awal (2/7)
f) potensi untuk melakukan pekerjaan yang lebih baik (3)
g. Tulis kembali kalimat berikut menggunakan bentuk ekspresi yang benar di Latihan 12e.
1) Sayangnya, kami harus membuang konsep tersebut dan memulai lagi.
• Kami harus kembali ke papan gambar.
2) Masalah ini adalah kekurangan produk yang paling serius.
• Ini adalah tumit Achilles product.
3) Tidak ada gunanya mendesain ulang apa yang sudah bekerja dengan baik.
• Tidak ada gunanya menciptakan kembali roda.
4) Ini adalah desain yang benar-benar baru - kami mulai dari awal.
• Kami mulai dari awal dengan rancangan baru ini.
5) Desain baru jauh lebih baik - ini adalah transformasi
• Desain baru adalah lompatan kuantum.
6) Saya pikir pasti ada kemungkinan untuk menjadi lebih baik di bidang ini
• Saya pikir masih ada ruang untuk perbaikan.
13. a. Secara berpasangan, diskusikan bagaimana perangkat penunjuk komputer telah
meningkat sejak mouse pertama kali ditemukan. Gunakan bahasa dari bagian ini dan kata-kata
di dalam kotak.
➢ Mouse pertama diperbaiki dengan menyempurnakan bentuknya, dengan menambahkan
tombol dan roda tambahan ke atas dan ke bawah. Mekanismenya didesain ulang dengan
menggunakan bola sebagai pengganti roda, meskipun mekanisme roda masih
digunakan di dalam mouse, saat bola menggelinding, itu menyebabkan roda berputar.
Untuk mouse optik, para perancang menggunakan sensor optik. Mereka juga
mendesain ulang koneksi antara mouse dan komputer, menjadikannya tanpa kabel.
b. Anda telah diminta oleh produsen perangkat keras komputer untuk memikirkan beberapa
perbaikan fungsional dan solusi teknis untuk perangkat penunjuk. Berpasangan, diskusikan ide
anda.
c. Sampaikan ide Anda dalam Latihan 13b kepada pasangan.
✓ ink/toner cartridges: lmprove the user interface by making cartridges easier to remove
and replace; consumables - make cartridges bigger so they last longer and need to be
replaced less often.
✓ paper: lmprove reliability by refining mechanisms to help prevent paper blockages;
improve output speed by making the paper flow faster.
✓ powe-r: Reduce environmental impact by having the printer switch off automatically
when not in use.
✓ software: lmprove the user interface by making the software easier to use.
b. 6.6 Marta, a manager at the printer manufacturer, is briefing the design team on key
requirements for the redesign of a printer. Listen to the start of the meeting. Which two areas
on the slide in Exercise 12a are discussed?
✓ Items 2 and 7
c. 6.6Listen again and answer the following questions.
1. Should the layout and components of the new printer differ much from the existing
design? Why (not)?
✓ No. The existing design has proved to be effective. The company doesn't have the
resources to make fundamental changes to the production process.
2. many times has the existing model been improved in the past?
• Once
3. What consideration is behind the decision on how different the new software should
be?
• The software has been a maior weakness of the existing model.
4. what extent should the new software system differ from the existing one?
• Significantly - it needs to be simpler to use
d. Look at the following verbs from the discussion and find three examples where re- means
again. Match the other three verbs to the definitions in the box.
improve overall, improve the details, stay (the same).
1. redesign design again
2. reinvent invent again
3. refine improve the details
4. Revamp improve overall
5. rethink think again
6. remain stay (the same)
e. 6.6 Complete the following expressions from the discussion using the words in the box.
Listen and check your answers.
Achilles back dnwing board ground heel improvement leap quantum reinvent room scratch
up whell
1. Reinvent the wheel
2. designing the whole thing from the ground up
3. For room; improvement
4. The Achilles heel
5. Back to the drawing board
6. make a quantum leap
7. designing the system from scratch
f. Match the expressions (1-5) in Exercise 12e to the definitions (a-f)
a. waste time re-creating something that has already been created 1
b. the biggest weakness 4
c. start again because the first plan failed 5
d. make huge progress 6
e. design from the beginning 2/7
f. potential for doing a better job 3
g. Rewrite the following sentences using the correct form of the expressions in Exercise 12e.
1. Unfortunately, we had to scrap the concept and start again.
• We head to go back to the drawing board.
2. This problem is the product's most serious shortcoming.
• This is the product's Achilles heel.
3. There's no point redesigning what already works perfectly well
• There's no point reinventing the wheel.
4. lt's a totally new design - we started from the very beginning.
• We started from the ground up with this new design.
5. The new design is so much better - it's a transformation
• The new design is a quantum leap.
6. I think there's definitely a possibility to do better in this area.
• I think there's room for improvement.
13. a. in pairs, discuss how computer pointing devices have improved since thefirst mouse was
invented. Use the language from this section and thewords in the box.
ball, buttons, first mechanical mouse, optical mouse, optical sensors, refined mechanical
mouse, sensitive surfuce, touchpad, wheel, wireless.
c. You have been asked by a computer hardware manufacturer to think of some functional
improvements and technical solutions for pointing devices. ln pairs, discuss your ideas.
d. Present your ideas in Exercise 13b to another pair.
• The first mechanical mouse was improved by refining its shape: by adding an additional
button and a wheel to the top and by revamping the wheel mechanism under the mouse.
The mechanism was redesigned to use a ball instead of wheels, although a wheel
mechanism was still used inside the mouse; as the ball rolled, it caused the wheels to
turn. For the optical
mouse, the designers completely rethoughthe underside of the mouse. lnstead of using
a ball, they used optical sensors. They also redesigned the connection between the
mouse and the
computer, making it wireless instead of having a wire. For the touchpad, the designers
went back to the drawing board and invented a new system using a sensitive surface.