Created by: -
Phone: -
Fax: -
Date: -
Position Qty. Description Single Price
2 S1.80.100.170.4.54H.S.304.G.N.D Price on request
The submersible S pumps are specifically designed for handling wastewater, process
water and unscreened raw sewage in a wide range of municipal, domestic and
industrial applications.
The S pumps are fitted with 1.65 kW up to 155 kW motors.
Pumps with higher performance are available on request.
The pumps are grouped into the following pump ranges: 34, 42, 50, 54, 58, 62, 66 and
70, each representing a motor size with similar external and internal dimensions,
cooling system, shaft seal and bearings.
Each pump range consists of pump types with different features and performance
range.
The S pumps are provided with SuperVortex, single-channel, two-channel or
three-channel
impeller.
S pumps with SuperVortex impeller can handle solids up to 100 mm in size.
S pumps with channel impeller can handle solids up to 145 mm in size, depending on
the pump range.
Liquid:
Liquid temperature range: 0 .. 40 °C
Liquid temp: 20 °C
Density: 1000 kg/m³
Technical:
Actual calculated flow: 55.5 l/s
Resulting head of the pump: 20 m
Actual impeller diameter: 304 mm
Type of impeller: 1-CHANNEL
Maximum particle size: 80 mm
Primary shaft seal: SIC-SIC
Secondary shaft seal: SIC-CARBON
Materials:
Pump housing: EN-GJL-250
Impeller: EN-GJL-250
Motor: EN-JL1040
Installation:
Range of ambient temperature: -20 .. 40 °C
Flange standard: DIN
Electrical data:
Number of poles: 4
Maximum current consumption: 36 A
Power input - P1: 20 kW
Rated power - P2: 17 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 400 V
Voltage tolerance: +10/-10 %
Start. method: star/delta
Max starts per. hour: 20
Starting current: 169 A
Rated speed: 1455 rpm
Motor efficiency at full load: 86 %
Motor efficiency at 3/4 load: 86 %
Motor efficiency at 1/2 load: 84 %
Enclosure class (IEC 34-5): 68
Insulation class (IEC 85): F
Explosion proof: no
Ex-protection standard: N
Length of cable: 10 m
Cos phi 1/1: 0,81
Cos phi 1/2: 0,60
Cos phi 3/4: 0,73
Others:
Net weight: 320 kg
Materials:
Material: Cast Iron/Stainless steel
Installation:
Flange standard: DIN
Pressure stage: PN 10
Number of base units: 1
Number of gaskets: 1
Number of profile gaskets: 1
Number of guide brackets: 1
Number of guide claws: 1
Size of nuts: M16/25/145
Number of screws: 8
Size of screws: M16 x 40
95113518 S1.80.100.170.4.54H.S.304.G.N.D 50 Hz
H S1.80.100.170.4.54H.S.304.G.N.D, 50 Hz eta
(m) Q = 55.5 l/s (%)
H = 20 m
36 v = 7.07 m/s
Density = 998.2 kg/m³
32
28
24
20
5 4 3 2 1
16 80
70
12 60
50
8 40
30
4 20
Eta pump = 70.2 % 10
Eta pump+motor = 60.4 %
0 0
0 20 40 60 80 100 120 140 Q(l/s)
P NPSH
(kW) (m)
40 8
30 6
20 4
10 2
P2 = 15.5 kW
0 P1 = 18 kW 0
Installation: S 60,3
Min. level
Installation vertical
Auto-coupling: 96090994
220 1003
Base stand: 96102314 180 DN100
22
103 1122
Frame range: 54 8 X 20 Min. level
Installation C
Liquid: 413
Electrical data:
Number of poles: 4
Maximum current consumption: 36 A
Power input - P1: 20 kW
Rated power - P2: 17 kW
Mains frequency: 50 Hz Thermalswitch
1
InEx-pumps2pcs.Moistureswitch Moistureswitchandthermalprotectors.
2 Readclockwise
3
2 P3
P3
fromground
1 U1
Motor
U2
3 3 P2 U1 U1
t+
+ W1 U1 U2
2
U2
5 V1 3 V1 V2
V1
T2
t+ t+ t+ W2
V2
U2
W1
W2
6
W1
W2
Ex-protection standard N P3
4
Length of cable: 10 m P1 P2
5
1
Cable size: 2X4X6MM2+1X7X1,5MM2 2
4 6
T1
T2
R: 0,570 Ohm 3
Others:
Net weight: 320 kg
Materials:
Material: Cast Iron/Stainless steel
Installation:
Flange standard: DIN
Connection: DN 100/DN 100
Pressure stage: PN 10
Number of base units: 1
Number of gaskets: 1
Number of profile gaskets: 1
Number of guide brackets: 1
Number of guide claws: 1
Size of nuts: M16/25/145
Number of screws: 8
Size of screws: M16 x 40
Others:
Designed for: S1.100.100, S1.80.100
95113518 S1.80.100.170.4.54H.S.304.G.N.D 50 Hz
Input Sizing result
Select Application Type S1.80.100.170.4.54H.S.
Overview mode No 304.G.N.D
Wastewater Quantity * Motor 2 * 17 kW,
Select Application Area Flow 55.5 l/s ( +1%)
H geodetic 15 m
Commercial
buildings H total 20 m ( +0%)
Flow total 194802 m³/year
Select Type of Installation Power P1 18 kW
Submersible pump Power P2 15.5 kW
with autocoupling NPSH available 2.82 m
system Eta pump 70.2 %
Configuration Eta motor 86.0 %
Total number of pumps 2 Eta pump+motor 60.4 % =Eta pump * Eta
Of these: number of standby pumps 1 motor
Cooling jacket required No Eta total 60.4 % =Eta relative to the
duty point
Select Type of Hydraulic Best eta pump 70.4 % =Eta in best
Semi-open Impeller Yes efficiency point
Vortex Impeller Yes Best eta pump+motor 60.6 % =Eta in best
Channel impeller Yes efficiency point
Grinder Yes Nom. Motor Speed 1455 rpm
Your Requirements Energy consumption 21372 kWh/Year
Discharge Flow (Q) 55 l/s Price On request
Geodetic Head 15 m Price + energy costs (1) /15Years
Pipe friction losses 5m
Variable speed No H S1.80.100.170.4.54H.S.304.G.N.D, 50 Hz eta
Allowed undersize 10 % (m) Q = 55.5 l/s (%)
Liquid Temp. <= 40 ? Yes
H = 20 m
Select Type of Material 32 v = 7.07 m/s
Complete Cast iron Yes Density = 998.2 kg/m³
Cast iron with stainless steel impeller No 28
Cast iron motor with stainless steel pump No
housing and impeller 24
Complete stainless steel No
20
Select Type of Motor
Standard motor
5 4 3 2 1
16 80
Edit Load Profile 70
Load profile Standard profile 12 60
Period Day 50
Operation hours per day 8 h/day 8 40
Consumption Q1 100.0 % 30
Consumption Q2 75.0 % 4 Eta pump = 70.2 % 20
Consumption Q3 55.0 % Eta pump+motor = 60.4 % 10
Consumption Q4 35.0 % 0 0
0 20 40 60 80 100 120 140 Q(l/s)
Consumption Q5 12.0 %
Consumption Q1 55 l/s P NPSH
Consumption Q2 41.3 l/s (kW) (m)
Consumption Q3 30.3 l/s
Consumption Q4 19.3 l/s 30 6
Consumption Q5 6.6 l/s
Time T1 0.4 h/day 20 4
Time T2 0.7 h/day
Time T3 1.1 h/day
Time T4 2.2 h/day 10 2
P2 = 15.5 kW
Time T5 3.6 h/day 0 P1 = 18 kW 0
Operational Conditions
Frequency 50 Hz
Phase 1 or 3
Load Profile
1 2 3 4 5
Flow 90 75 55 35 12 %
Head 100 105 112 123 150 %
P1 18 17.6 16.9 15.8 13 kW
Eta total 60.4 60.5 60.5 60.0 53.0 %
Time 147 264 396 792 1321 h/Year
Energy consumption 2361 3696 4352 6123 4839 kWh/Year
Quantity 1 1 1 1 1