The objective of the control system is to control the output variables in some
prescribe manner using the input variables, through the elements of the control
system.
1
1/3/2010
An INPUT signal is represented by an arrow pointing into the block and an output
signals is represented by an arrow pointing away from the block.
Figure 1
Figure 2
2
1/3/2010
Figure 3
The speed control of a motor cycle by a rider can be considered as a closed loop
control system where the rider acts as the controller.
Figure 4
3
1/3/2010
4
1/3/2010
Figure 5
Figure 6
5
1/3/2010
Figure 7
Figure 8
6
1/3/2010