18-21 January 2009. Sheraton Hotel & Convention Center. Santiago, Chile
PRELIMINARY PROGRAMME
Nickel, Copper and Cobalt Distribution and Equilibria in Anglo Platinum Furnace Slags
L. Andrews and P. Pistorius, Anglo Research / University of Pretoria, South Africa.
Phase Equilibria of the Fayalite-Based Slag for the Slag Cleaning Process in Copper Production
H. Henao, J. Font, A. Moyano, P. Hayes and E. Jak, Institute for Innovation in Mining and Metallurgy - IM2
/ Codelco Norte / The University of Queensland, Chile / Australia.
Liquidus Temperatures in Calcium Ferrite Slags Equilibrated with Molten Copper and their
Industrial Application to Copper Converting
Stanko Nikolic, Gerardo Alvear, Bill Errington, Peter Charles Hayes and Evgueni Jak, The University of
Queensland / Xstrata Technology Pty. Ltd., Australia.
Modelling of Copper Content Variation during “El Teniente” Slag Cleaning Process
Christian Goñi and Mario Sánchez, University of Concepción, Chile.
Efficiency of Copper Recovery from Smelting Slag in Codelco Norte Electric Furnace
A. Moyano, C. Caballero, F. Rojas, A. Warczok and J. Font, Institute for Innovation in Mining and
Metallurgy - IM2 / Codelco Norte, Chile.
The Rate of Oxygen Reduction from the Slag from the Direct-to-Blister Flash Smelting Process
Marian Kucharski and Katarzyna Rogóż, AGH University of Science and Technology, Poland.
www.molten2009.com - info@molten2009.com - Phone +56 (2) 652 1542 - Fax: +56 (2) 652 1570
The Copper Losses in the Slags obtained by Plasma Reduction Process
Ivan Imris and Alexandra Klenovcanova, Technical University of Kosice, Slovakia
ISASMELTTM Slag Chemistry and Copper Losses in the Rotary Holding Furnaces Slag at Ilo
Smelter
Leopoldo Mariscal and Enrique Herrera, Southern Peru Copper Corporation, Peru.
Slag and Iron Droplet Formation during Desulphurisation of Hot Metal-Industrial Investigation
M. Magnelov, J. Eriksson, L. Nilsson, J. Drugge, J. Bjorkvall and J-O. Wikstrom, Metallurgic Research
Institute - SSAB, Sweden.
Research on Development & Utilization Technology for High Phosphorus Oolitic Hematite
Wu Jie, Process Technology Institute of R&D Center of Wisco, China.
Formation, Development and Refining Capability of the Slag/ Metal Emulsion in a BOS Converter
M. Millman, A. Overbosch, A. Kapilashrami, J. Small, J. Liefhebber, E. Zinngrebe, D. Malmberg and M.
Brämming, Teesside Technology Centre / Ijmuiden Technology Centre / MEFOS, Uk / The Netherlands /
Sweden.
Study of the Effect of Flux Type and Oxygen Blowing on Simultaneous Removal of Phosphorus
and Sulfur from Molten Iron
Hamed Abdeyazdan, Hosein Edris and Mohammad Hasan, Isfahan University of Technology, Iran.
www.molten2009.com - info@molten2009.com - Phone +56 (2) 652 1542 - Fax: +56 (2) 652 1570
The Steel Eco-Cycle – a Sustainable Manufacture and Use of Steel
Birgitta Lindblad, Jernkontoret, Sweden.
Effect of Carbon Oxidation Reaction Flow on Mixing Indices in the Ferroalloy Furnace at
Carbonaceous Ferromanganese Manufacture
L. Kamkina, Y. Stovba, Y. Projdak and G. Stovpchenko, National Metallurgical Academy of Ukraine.
Research into the Reduction of Iron Oxides from Slag Using a Liquid Reducer from Iron Solution
Miroslaw Karbowniczek and Piotr Migas, AGH University of Science & Technology, Poland.
The Modification and Minimization of Spinel (MgO·Al2O3) Inclusions Formed in Ti Added Steel
Melts
Seon-Hyo Kim, Chang-Woo Seo, Sung-Koo Jo, Min-Oh Suk and Sun-Min Byun, Pohang University of
Science and Technology / POSCO, Korea.
Treatment of Hot Metal and Liquid Steel with Waste Materials from the Aluminum Industry
Yin Dong Yang, Flora Y.J. Chang and A. McLean, University of Toronto, Canada.
Optimization of the EAF-VTD Processing Route at Nucor Steel - Indiana to Produce Low-Carbon,
Low-Sulfur Steel Grades
J. Geldenhuis, D. Sosinsky, D. Murray and D. McGaughey, Nucor Steel, USA.
Layers in the Slag Film between Steel Shell and Mould in Continuous Casting of Stainless Steel
Paavo Hooli, Outokumpu Stainless Oy, Finland.
www.molten2009.com - info@molten2009.com - Phone +56 (2) 652 1542 - Fax: +56 (2) 652 1570
MELT (SLAG, MATTE, ALLOYS) PHASE COMPOSITION, THERMODYNAMIC AND
PHYSICAL PROPERTIES - SLAG/METAL EQULIBRIUM (51)
Glassy Products as Construction Material out of Mineral Slags
Heiko Hessenkemper,Technical University of Freiberg, Germany.
Surface Tension Measurements of Molten Coal Ash Slags under Oxidising and Reducing Gas
Atmosphere
T. Melchior and M. Mueller, Forschungszentrum Julich, Germany.
Modification Study of Steel Slag to Prevent the Slag Disintegration after Metal Recovery and to
Enhance Slag Utilization
Q. Yang, D. Adolfsson and B. Bjorkman, Lulea University of Technology, Sweden.
www.molten2009.com - info@molten2009.com - Phone +56 (2) 652 1542 - Fax: +56 (2) 652 1570
Vitrified Bottom Ash Slag from Municipal Solid Waste Incinerators - Phase Relations of CaO-SiO2-
Na2O Oxide System
Z. Zhang, Y. Xiao, J. Voncken, Y. Yang and R. Boom, Delft University of Technology, The Netherlands.
High Temperature Processing of Fly Ash Slag for the Production of Environmentally Safe Materials
Zaid Ghouleh, M. Isac, R. Guthrie and P. Carabin, McGill University / Pyrogenesis Inc., Canada.
Thermodynamic Behavior of Transition Metal (Cr, Ti, Nb, V) Oxides in Molten Slags
Baijun Yan, Jiayun Zhang and Qing Song, University of Science and Technology Beijing / Chinese Society
for Metals, China.
Role of Solid CaO in FeO-CaO-SiO2-P2O5 Multi Phase Flux at Hot Metal Dephosphorization
Temperature
Xiao Yang, Reita Saito, Tasuku Hamano, Hiroyuki Matsuura and Fumitaka Tsukihashi, The University of
Tokyo, Japan.
Initial Melting and Reduction of Ore and Fluxes at the Top of the Coke Bed during SiMn-Production
Eli Ringdalen, Merete Tangstad and Sean Gaal, SINTEF Materials and Chemistry / NTNU, Norway.
Thermodynamic Properties and Structural Assessment of Boron Oxide in CaO-SiO2 and CaO-SiO2-
CaF2 Slags Systems for Silicon Refining
Leandro Augusto Viana Teixeira and Kazuki Morita, The University of Tokyo, Japan.
Thermal Conductivity of the Na2O-SiO2 and the CaO-Al2O3-SiO2 Melts Measured by Hot-Wire
Method
Youngjo Kang and Kazuki Morita, The University of Tokyo, Japan.
www.molten2009.com - info@molten2009.com - Phone +56 (2) 652 1542 - Fax: +56 (2) 652 1570
Stabilization of Steelmaking Slag through Carbonation Treatment
Yasuaki Kusada and Yoshiaki Kashiwaya, Hokkaido University, Japan.
Significant Mineralogical Differences between Basic Test and Production Iron Ore Sinters with
Equal Chemical Composition
Pekka Tanskanen, Kimmo Kinnunen and Timo Paananen, University of Oulu / Rautaruukki Oyj, Finland.
Phase Relations for the Al2O3-CaO-SrO System Evaluated by in-Situ Observation with Confocal
Laser Microscope
Kazuki Morita and Tomonori Kuroki, The University of Tokyo, Japan.
Quantificational Analysis for the Non-Crystalline and Crystalline Solids in Blast Furnace Slag
Wang Hai-Feng, Guo Pei-Min, Zhang Chun-Xia and Qi Yuan-Hong, Central Iron & Steel Research
Institute, China.
www.molten2009.com - info@molten2009.com - Phone +56 (2) 652 1542 - Fax: +56 (2) 652 1570
Experimental Investigation of Phase Equilibria of Subsystems in the MnO-SiO2-Al2O3-MnS System
Dae-Hee Woo, Youn-Bae Kang, Henri Gaye and Hae-Geon Lee, Pohang University of Science and
Technology - POSTECH / École Polytechnique, Korea / Canada.
The High Temperature Raman Spectroscopy and Ion Cluster Theory for Metallurgical Slag and
Magma
Guo-Chang Jiang, Yong-Quan Wu and Jing-Lin You, Shanghai University, China.
The Viscous Behavior of High Al2O3 Containing Blast Furnace Type Slags
Hyuk Kim, Young Seok Lee, Joo Hyun Park and Dong Joon Min, Yonsei University, Korea.
A New Method for Viscosity Estimation of Slags in CaO-FeO-MgO-MnO-SiO2 System Using Optical
Basicity
Qifeng Shu and Jiayun Zhang, University of Science and Technology Beijing, China.
www.molten2009.com - info@molten2009.com - Phone +56 (2) 652 1542 - Fax: +56 (2) 652 1570
Surface Properties of the Pb-O-Bi System
R. Novakovic, E. Ricci and D. Giuranno, National Research Council (CNR) / Institute for Energetics and
Interphases (IENI), Italy.
Viscosity Measurements and Estimation of High TiO2 Containing Blast Furnace Slags
Rong Wang, Mei Zhang, Min Guo and Xidong Wang, Peking University / University of Science and
Technology Beijing, China.
Models for the Thermodynamic Properties, Density and Viscosity of Molten Salts
Christian Robelin, Gunnar Eriksson, Arthur Pelton and Patrice Chartrand, École Polytechnique / GTT-
Technologies, Canada.
A Viscosity Model for the Liquid Alkali Aluminosilicate Melts Relevant to Coal Ash Slags
A. Kondratiev, E. Yazhenskikh, M. Mueller and K. Hack, GTT Technologies / Forschungszentrum Juelich
Gmbh, Germany.
Molecular Dynamics Calculation for Surface Tension of Liquid Metals Using the Embedded Atom
Model
D. Belashchenko, N. Kravchunovskaya and O. Ostrovski, Moscow Steel and Alloys Institute / University of
New South Wales, Russia.
www.molten2009.com - info@molten2009.com - Phone +56 (2) 652 1542 - Fax: +56 (2) 652 1570
Effect of Simulated Slag Phase on the Mixing and Mass Transfer Rates in a 1/5 Scale Model
Creusot-Loire Uddeholm (CLU) Converter Model
A. Chaendera and R. Eric, University of the Witwatersrand, South Africa.
The Mechanisms of Electrochemical Vaporization from Sodium Silicate Melt Heated by Transfer
Thermal Plasma of Ar
Kazuhiro Nagata and Kei-Ichiro Kashimura, Tokyo Institute of Technology, Japan.
Factors Determining the Rate of Magnetite Reduction in a Liquid Slag by Graphite Electrodes
V. Montenegro, A. Warczok and G. Riveros, University of Chile.
Evaluation of the Effects of Gas Injection in the Vacuum Chamber of a RH Degassser on Melt
Circulation and Decarburization Rates
Leonardo Neves and Roberto Parieras, Universidade Federal de Minas Gerais, Brazil.
Ionic Melts Properties and their Use in the Electrowinning of Refractory Metals
F. Lantelme and H. Groult, Université Pierre et Marie Curie, France.
Salt Extraction Process - A Novel Route for Metal Extraction for Ferrous as well as Non-Ferrous
Industries
X. Ge, O. Grinder and S. Seetharaman, Royal Institute of Technology, Sweden.
www.molten2009.com - info@molten2009.com - Phone +56 (2) 652 1542 - Fax: +56 (2) 652 1570
Phase Diagrams, Structural and Thermodynamic Properties of Molten Salt Solvents for the
Industrial SO2-Oxidation Catalyst
Rasmus Fehrmann, S. Boghosian, H. Hamma-Cugny and J. Rogez, Technical University of Denmark /
University of Patras / Institut des Matériaux, Denmark / Greece / France.
Interfacial Reactions between Coal – and Petcoke – Slags and Refractory Materials
Jinichiro Nakano, Sridhar Seetharaman, James Bennett and Kyei-Sing Kwong, National Energy
Technology Laboratory / Carnegie Mellon University, USA.
Modeling of the Surface/Interfacial Tensions of the Phases in the Oxidative Ladle Refining of
Metallurgical Grade Silicon
Kai Tang, Alireza Ashrafian, Jan Erik Olsen, Stein T. Johansen and Leiv Kolbeinsen, SINTEF Materials
and Chemistry / Norwegian University of Science and Technology, Norway.
www.molten2009.com - info@molten2009.com - Phone +56 (2) 652 1542 - Fax: +56 (2) 652 1570
VESSEL INTEGRITY AND REFRACTORIES (5)
Molten Slags Formed during Gasification of Carbon Feedstock and their Interaction with High
Chrome Oxide Refractory Liners of Air Cooled Slagging Gasifiers
James Bennett and Cynthia Powell, National Energy Technology Laboratory, USA.
Development of the Mould Slag Film and its Impact on the Surface Quality of Continuously Cast
Semis
B. Stewart, K. Bain, M. McDonald, R. Burniston, M. Bugdol and V. Ludlow, CORUS / Teesside
Technology Centre, UK.
Molten Mould Flux Feeding Technology for Continuous Casting of Steel Slabs
Jung-Wook Cho, Joong-Kil Park, Ki-Hyeon Moon and Sang-Ho Lee, POSCO, Korea.
www.molten2009.com - info@molten2009.com - Phone +56 (2) 652 1542 - Fax: +56 (2) 652 1570
Effect of Crystalline Morphology on Heat Transfer through Mould Flux
Miyuki Hayashi, Kazuki Matsuo, Hideko Nakada and Kazuhiro Nagata, Tokyo Institute of Technology /
The University of Tokyo, Japan.
Effect of Al2O3 and CaF2 on the Solidification of Mould Slags and the Heat Transfer
Stefan Lachmann and Piotr Scheller, Freiberg University of Mining and Technology, Germany.
Effect of Transition Oxides on Radiative Heat Transfer through Mould Flux Film
Jiang Diao, Bing Xie, Yugang Li and Jianping Xiao, Chongqing University, China.
Design of Porous Glass & Slag Materials and its Application to Refining Processing
Toshihiro Tanaka, Osaka University, Japan.
Simultaneous Mo, W, Ni, and Co Electroreduction and Deposition of Related Metals and Alloys
V. Malyshev, A. Gab, I. Astrelin and M. Gaune-Escard, National Technical University of Ukraine / Ecole
Polytechnique, Ukraine / France.
The Innovation Imperative: Why More of the Same is not Good Enough
Chris Twigge-Molecey, Hatch, Canada.
CFD Model for the Steady and Unsteady State Analysis of a Gas Mixer for the Caletones Off-Gas
Handling System
Lowy Gunnewiek, Claudio Muñoz and Máximo León, Hatch Ltd., USA / Chile.
www.molten2009.com - info@molten2009.com - Phone +56 (2) 652 1542 - Fax: +56 (2) 652 1570