TABLE OF CONTENTS
Axles, Axle Assemblies & Brakes Section A Suspension Tires & Wheels Jacks, Couplers & Winches Towing Cargo Control Chemicals & Coatings Body & Frame Hardware & Locks Actuating Systems Lights & Electrical Section B Section C Section D Section E Section F Section G Section H Section J Section K Section L
WWW.TEXTRAIL.COM
P R E FA C E
GENERAL TERMS AND CONDITIONS All transactions between you and the Customer (Customer) and TexTrail Inc. (TexTrail) are subject to the following General Terms and Conditions: 1. All prices are expressed in United States dollars, and do not include freight charges from. Odessa, Texas, Mt. Pleasant, Texas, Ocala, Florida, Madill, Oklahoma, Georgia, and Idaho, costs of freight to be paid by Customer. Prices are subject to change without notice, and prices in effect at time of delivery/ shipment will apply. Special quotes given on items not shown in TexTrails catalog are valid only for the period specified in writing, or 30 days if no period is specified in writing. 2. Unless otherwise agreed to in writing by TexTrail, and Customer, terms are payment by Cash on Delivery (COD). 3. Invoices not paid within 30 days of the invoice date will bear interest at the maximum rate allowed by state law. If unpaid amounts are turned over to an attorney for collection, Customer shall pay all costs of collection, including reasonable attorneys fees and court costs. 4. Title to items sold and risk of loss and damage shall pass to Customer upon delivery by TexTrail to common carrier or Customer, as the case may be, except that title to (but not risk of loss) shall in the case of items supplied upon credit terms not pass until payment in full has been received by TexTrail. 5. Customer agrees to assume all risks incident to the care, handling, and use of all products purchased; and warrants, by purchase of an item, that Customer is familiar with the item and its proper use. Before using an item, Customer shall give such item reasonable and prudent examination and/or tests to determine the suitability of item for Customers intended use. Any item delivered to Customer shall be deemed accepted by Customer unless written notice of defect or nonconformity is received by TexTrail within thirty (30) days after date of delivery. Customer assumes all risk and liability in connection with an item from time of delivery to Customer. 6. Customer agrees to indemnify TexTrail and save TexTrail harmless and free from liability against any and all claims, damages or assertion of liability of every nature whatsoever to persons or property arising out of or in connection with the handling or use of all such products as TexTrail may cause to be delivered to Customer, including but not limited to, any and all claims based on asserted defects of material or workmanship of such products. 7. TEXTRAIL DOES NOT WARRANT ANY PRODUCT, COMPONENTS OR PARTS NOT MANUFACTURED BY TEXTRAIL OR COVERED BY THE WARRANTY OF THE PRODUCTS MANUFACTURER. TEXTRAIL DOES NOT WARRANT DAMAGE CAUSED BY ABUSE OR MISUSE OF ANY PRODUCT. TEXTRAIL DOES NOT WARRANT DAMAGE CAUSED BY DISASTERS SUCH AS FIRE, FLOOD, WIND, AND LIGHTENING. TEXTRAIL DOES NOT WARRANT DAMAGES CAUSED BY UNAUTHORIZED ATTACHMENTS OR MODIFICATIONS TO PRODUCTS SOLD BY TEXTRAIL INCLUDING EQUIPMENT, MATERIALS OR SUPPLIES. TEXTRAIL DOES NOT WARRANT DEFECTS CAUSED BY FAILURE OF CUSTOMER TO FOLLOW INSTRUCTIONS, MAINTENANCE SCHEDULES, OR WARNINGS PROVIDED WITH THE PRODUCT SOLD BY TEXTRAIL INCLUDING EQUIPMENT, MATERIAL OR SUPPLIES. 8. EXCEPT AS OTHERWISE PROVIDED IN WRITING AND SIGNED BY AN AUTHORIZED OFFICER OF TEXTRAIL, TEXTRAIL DISCLAIMS ANY AND ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 9. IN NO CASE SHALL TEXTRAIL BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES BASED UPON BREACH OF WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY OTHER LEGAL THEORY. SUCH EXCLUDED DAMAGES INCLUDE BUT ARE NOT LIMITED TO, LOSS OF PROFITS, LOSS OF SAVINGS OR REVENUE, LOSS OF USE OF THE PRODUCT (EQUIPMENT, MATERIALS OR SUPPLIES), FACILITIES OR SERVICES, DOWNTIME, THE CLAIMS OF THIRD-PARTIES INCLUDING THE CUSTOMERS OF CUSTOMER, AND TO DAMAGE/INJURY TO THE PROPERTY. THIS LIMITATION DOES NOT APPLY TO DAMAGES CAUSED BY BREACH OF WARRANTY OF TITLE. SOME STATES/PROVINCES DO NOT ALLOW LIMITS ON WARRANTIES OR ON REMEDIES IN SOME CIRCUMSTANCES. IN SUCH STATES/PROVINCES, THE LIMITS IN THIS PARAGRAPH AND IN THE PARAGRAPH IMMEDIATELY PRECEDING MAY NOT APPLY. 10. Any action for any breach of contract by TexTrail or any breach of warranty must be commenced within 365 days of the date the tender of delivery of the Product (equipment, materials or supplies) is made. 11. This agreement allocates the risk of product failure between TexTrail and the Customer. This allocation is recognized by both parties and is reflected in the price of the goods. The purchaser acknowledges that it has read this agreement, understands it and is bound by its terms. 12. Possession of price lists, brochures, manuals or other TexTrail documents does not constitute an offer by TexTrail to sell at the prices shown.
TEXTRAIL TRAILER PARTS SAFE TOWING INSTRUCTIONS With a trailer in tow, youre operating a vehicle combination that is longer, heavier, and sometimes wider and taller than youre used to. So, youll have to make some compensating adjustments in your normal driving practices: Slow Down. Moderate to slow speeds put less strain on your tow vehicle and trailer. Take a Shakedown Cruise. At least one short trial run before your rst trip will help. Familiarize yourself with your trailers operating characteristics. It also will let you know that the lights, brakes, hitch, etc., are working properly. Allow Extra Time and Space. Youll need both when passing and stopping, especially if your trailer is not equipped with brakes. Check Rear View Mirrors. Doing this frequently will let you know that your trailer is riding properly. We recommend outside rear view mirrors on both sides of your tow vehicle. Swing Wider. You need to make wider swings at curves and corners because your trailers wheels are closer to the inside of a turn than the wheels of your car or truck. Pass With Extra Care. With trailer in tow, it takes more time and distance to get around a slower vehicle and return to the right lane. Watch the Wind. To avoid swaying, be prepared for sudden changes in air pressure and wind buffeting when larger vehicles pass from either direction. Slow down a bit and keep a rm hold on your steering wheel. Aim straight down your lane. Conserve Fuel. Youll go further on a tank of gas at moderate speeds. Higher speeds increase wind resistance against the trailer and reduce your gas mileage signicantly. Avoid Sudden Starts and Stops. This can cause skidding, sliding, or jackkning, even if your trailer has brakes. Avoid quick stops while turning. Smooth, gradual starts and stops will improve your gas mileage. Signal Your Intentions. Let surrounding vehicles know what you intend to do well before you stop, turn, change lanes, or pass.
WWW.TEXTRAIL.COM
P R E FA C E
TEXTRAIL TRAILER PARTS SAFE TOWING INSTRUCTIONS CONTINUED... Shift to a Lower Gear. A lower gear will help ease the load on the transmission and engine when going over steep hills, sand, gravel, or dirt roads. If your vehicle has an overdrive gear, shifting out of overdrive to a lower gear may improve the gas mileage. Always Be Courteous. Make it as easy as possible for faster-moving vehicles to pass you. Keep to the right of the road and prepare to slow down if passing vehicles need extra time to return to their proper lane. Dont Tailgate. Allow at least one car and trailer length between you and the vehicle ahead for each 10mph on your speedometer. If a Problem Occurs: Dont panic. Stay Calm. If you experience a sudden bumping or shtailing, it may indicate a at tire. Dont jam on the brakes or mash the accelerator in an attempt to drive out of it. Instead, come to a stop slowly as you keep driving in as straight line as possible. If conditions permit, coast to a very slow speed and try to avoid braking, except when your wheels are straight ahead and your trailer and tow vehicle are in line with each other. If your trailer begins to fishtail as you accelerate to highway speed, back off the accelerator a bit. This should stop the fishtailing. If it begins again as you increase speed, stop and check your load. The load should be equalized from side to side and forward enough to put a load on the trailer tongue. Redistribute the load as necessary before continuing.
HOW TO: RETURN OF MERCHANDISE 1. Merchandise may be returned only after a TexTrail Return Merchandise Authorization (RMA) code has been obtained. To obtain the RMA code, contact your servicing division (numbers listed on right page) with the item, quantity and original invoice number. 2. The RMA code, along with customer name, must be shown on all labels and correspondence concerning the returned merchandise. Please do not mark directly on return product. 3. A minimum 15% restocking charge will be assessed on authorized returns of merchandise that was shipped as ordered by the customer. Adjustment to restocking charge may be made by pending condition of returned merchandise. 4. Returns will not be postage/shipping authorized for products that are special orders. 5. All returns must be prepaid and returned within 30 days of authorization in order to receive credit. 6. Credits may take between one and 10 business days. Customers returning merchandise due to error or mis-ordering can/will be charged a 15% restocking fee. 7. Ship returns to address of shipping division with a copy of invoice and any notes or comments that are necessary to expedite the credit and return. DAMAGES OR SHORTAGES IN SHIPMENT EN ROUTE: When a shipment is received damaged or received short (not specied number of pallets, boxes, bundles, etc.) it is the responsibility of the Customer to le a claim directly with the freight carrier within ten (10) days of the receipt of shipment. ORDER RECEIPT DISCREPANCIES Upon receipt of your order please confirm receipt with packing list and notify TexTrail of any quantity or item discrepancies within three (3) business days. SPECIAL NOTES All users of this product catalog be aware that the information presented is significantly affected by factors within the exclusive knowledge of the user including, among other things, service conditions, trailer or tow vehicle configurations and hitch and coupler arrangements, that the users have independently investigated these factors and have solely relied on those investigations when using this catalog, and that it is the responsibility of the user to adequately specify, evaluate and test its trailer/running gear/tow vehicle combinations. Load ratings are function of the maximum load carrying capacity which is limited to the lowest load rating of any individual component selected. For instance, the load rating of a pair of tires or wheels may be lower than other axle components selected. If this is the case, the load carrying capacity of the axle assembly is reduced accordingly. Similarly if the load rating capacity of the coupler is lower than the axle/suspension and tire/wheel assembly, the coupler rating becomes the determining trailer capacity factor. TEXTRAIL is constantly upgrading products to better serve the marketplace. Therefore, TEXTRAIL reserves the right to make product improvements, change specifications or prices, and add or delete products and with substitutions at any time without notice. TEXTRAIL warehouses a wide variety of products that my vary by locale, plus laws and regulations may restrict some specific produces delivery in your area. Please contact your local servicing division to verify availability of products. We look forward to providing each customer with reliable trailer parts and trusted brands nation wide and we hope that each time you purchase you are provided with outstanding customer satisfaction.
WWW.TEXTRAIL.COM
6400102 LH 3.5k 10 x 2-1/4 Elec FSA Assembly 6400103 RH 3.5k 10 x 2-1/4 Elec FSA Assembly 6450135 LH 6K 12 x 2 Electric FSA Assembly 6450136 RH 6K 12 x 2 Electric FSA Assembly
TexTrail Trailer Parts proudly offers as part of our vast products line-up. Air Lift Company is the premier global supplier and manufacturer of aftermarket air suspension products.
More Prots
If you are selling trailers and/or trailer parts and not selling Air Lift load support products then you are passing on potential sales. Your customer base needs load support and if they are not purchasing it from you then chances are they are purchasing it from your competition. Dont leave that money out there on the table for your competitors to grab up. Remember selling Air Lift accessories is always a great way to increase prots!
Since 1949
Air Lift air spring systems put an end to these common problems:
Bottoming Out
Rough Ride
Air adjustability is the difference. Our adjustable air helper springs allow you to tune your suspension for heavy loads, towing or rough roads. A level, balanced vehicle improves ride, handling and brake performance. Air suspension is all we do you cant buy a better air spring!
57000 Series
Fits many ton and 1 ton pickups, vans and motor homes with leaf springs Up to 5,000 pounds of leveling capacity* Air adjustable from 5 to 100 psi for maximum comfort and load support Lifetime warranty!
59500 Series
Fits many ton and mini pickups, full-size and mini vans and SUVs with leaf springs Up to 2,000 pounds of leveling capacity* Air adjustable from 5 to 100 psi for maximum comfort and load support Lifetime warranty!
60000-80000 Series
Fits open coil springs on the front or rear Up to 1,000 pounds of leveling capacity* Air adjustable custom tune the ride you want Replaces P-30/32 OEM front air springs Lifetime warranty!
For maximum convenience and leveling on-the-go, nothing beats an Air Lift on board air compressor system. Easy to install, each system comes complete with everything you need. Air Lift on board air systems are the most advanced in the industry and work with all brands of air springs.
AirCell
Economically priced, popular accessory for pickups and vans Includes our exclusive wiring harness for faster, easier installation Automatically maintains safe air pressure Single path model features front-to-rear leveling. Dual path model controls two air springs independently for front-to-rear and side-to-side leveling
Rear kits for popular latemodel pickups, front kits for snow plow support Quick, easy, bolt-on installation Lifetime warranty
SERVING THE TRUCKING INDUSTRY WITH QUALITY misc ad CARGO CONTROL PRODUCTS
Ratchet Straps - 1" & 2" for a wide range of applications Winch Straps 4" x 30' w Flat Hook
Strap Winder
Series E Track Horizontal Winch Bars Standard Combination Box End Grade 70 Transport Chain Assemblies & Load Binders Rubber Tarp Straps in Assorted Lengths Galvanized & Painted
Lever
Ratchet
WWW.TEXTRAIL.COM
A-1
9,000 lb - 10,000 lb General Duty Capacity D90 - D100GD Leaf Spring Axle TORFLEX Suspension Hub Group Brakes Disc Brakes 10,000 lb Heavy Duty Capacity D100HD Leaf Spring Axle TORFLEX Suspension Hub Group Brakes 12,000 lb Heavy Duty Capacity D120 Leaf Spring Axle Hub Group Brakes 15,000 lb Heavy Duty Capacity D150 Leaf Spring Axle Hub Group Brakes 22,500 lb - 27,500 lb Heavy Duty Capacity D200 Leaf Spring Axle Hub Group Brakes Agricultural Hubs and Components Spring Seats Beams Bearing Kits Bearing Protectors Bearings Brake Mounting Flanges Brake Mounting Hardware Center Caps Grease & Oil Seals Grease Caps Heavy Duty Wheel Mounting Hardware Oil Caps Races Retaining Rings Rim Clamps Spindle Parts (Washers, Nuts & Cotter Pins) Spindles Wheel Bolts Wheel Mounting Hardware Wheel Nuts Wheel Studs
A-66 A-68 A-66 A-69 A-72 A-71 A-67 A-66 A-67 A-70 A-72 A-67 A-70 A-72 A-67 A-70 A-72
A-76 A-81 A-85 A-87 A-11 A-90 A-94 A-89 A-87 A-87 A-91 A-88 A-91 A-93 A-91 A-89 A-94 A-94 A-84 A-83 A-92 A-91 A-92 A-92
WWW.TEXTRAIL.COM
A-2
AXLE ASSEMBLIES
This information is intended as a guide for the proper specication and application of running gear, associated components and accessories.
We offer a full line of Dexter trailer axles that can be used in many different applications. When specifying any pre-engineered components such as axles, it is the responsibility of the trailer designer to insure compatibility with the vehicle and all of its sub-systems. The maximum load carrying capacity of any assembly is limited to the lowest load rating of any individual component selected. For instance, the load rating of a pair of wheels may be lower than other axle components selected. If this is the case, the load carrying capacity of the axle assembly is reduced accordingly. As a specic example, if the wheels are rated at 1500 pounds each and are used with other components rated at 3500 pounds per axle, the maximum load capacity is limited to 3000 pounds. If the tires are rated at 1400 pounds each and are used on this assembly, the maximum load carrying capacity is limited to 2800 pounds. For your trailer to perform properly and to protect the cargo you are hauling, trailer axles must be of the correct size, placement and type. The size of your trailer axles is going to depend on the size of your trailer. Contrary to popular belief, bigger is not better. Too many people will fall into the trap of purchasing axles and suspension that are oversized for their particular trailer. So, what size trailer axles do you need? 1. The rst thing to do is to consider your load. What will you haul? Add the weight of what you will be hauling to the empty weight of your trailer. Once you have this weight the number and capacity of the axles can be made. If you have 10 to no more than 20 percent in reserve then you are right on target. More than 20 percent will cause the ride to stiffen and become harsh. This can cause damage to your trailer and your load in the long run. 2. What type of spindle do you need? You have two options: Straight or Drop. A straight spindle is used most often and places the oor of the trailer over the wheels. A drop spindle is used when the trailer oor needs to be close to the ground, such as a cattle trailer. You will also need to decide if you want the EZLube option for your grease spindle. EZLube is a bearing lube system offered by Dexter for your axle hubs that will keep your trailer running cooler and prolong the life of your bearings. 3. Next, you must choose your trailer wheel bolt circle pattern for the hub of the axle. Basically bolt circle is measured by the imaginary circle that is centered on the axle hub and runs through the center point of the wheel studs. An even number of studs is relatively easy to measure since the wheel studs are directly across from one another, but the odd can be a bit tricky to calculate. For an uneven number of studs place a tape measure on one stud, skip the next stud and measure to the third stud. This will give you a measurement of 4.5, 5, 5.5 4.75 or 6.5.
WWW.TEXTRAIL.COM
A-3
AXLE ASSEMBLIES
4. Will the trailer require brakes? A single axle non commercial utility trailer does not need brakes while most all double and triple axle trailers do. Consult with your local DMV if you are unsure of the requirements of the state where your trailer will be registered. 5. Now you will need to determine the hub face for your axle. Measure the hub face to hub face length. The hub face is where the wheel mounts. Write down the total inches of this axle measurement. If you are building a trailer, consider the space necessary for the tire/wheel to t the trailer frame. Measure the length from the center of one spring seat to the center of the other. The spring seat is where the leaf spring is mounted. Write down this measurement and note if the spring seats are on the top or bottom of the axle.
Hub Face: Distance between hub face to hub face. Track: Distance between tire center to tire center. Spring Center: Distance between center of spring seat to center of spring seat.
WWW.TEXTRAIL.COM
A-4
WWW.TEXTRAIL.COM
A-5
WWW.TEXTRAIL.COM
A-6
WWW.TEXTRAIL.COM
A-7
WWW.TEXTRAIL.COM
A-8
WWW.TEXTRAIL.COM
A-9
Capacity
850 lb. 1,000 lb. 1,750 lb. 1,250 lb. 1,250 lb. 1,750 lb. 500 lb. 750 lb. 1,000 lb. 1,300 lb. 1,000 lb. 1,000 lb. 1,500 lb. 1,750 lb.
Ref#
72-16 1020 93180 75-6 SW722 SW3 WIC2 WIE3 WIH4 WI5 72-2 WID2 WIF3 WIG4
Type
Idler
Idler Straight Idler Straight w/ EZ-Lube Idler 4" Drop Idler 4"Drop w/ EZ-Lube
Part #
440
6151000 6151001 6151006 6151007
545**
6151012 6151013 6151018 6151019
Electric 7 x 1-1/4"
Electric Straight Electric Straight w/ EZ-Lube Electric 4" Drop Electric 4"Drop w/ EZ-Lube
440
6151002 6151003 6151008 6151009
545**
6151014 6151015 6151020 6151021
440
6151004 6151005 6151010 6151011
545**
6151016 6151017 6151022 6151023
Part #
9100063 9100116 9100087 9100071 9100117 9100007 9100064 9100041 9100060 9100061
Ref#
APS1 APS2 APS3 APS4 APS5 APS3SE APT1 APT3 APT4 APT5
*Axles come with 1-1/16" Spindles and either 1-3/4" OD tube on straight and 2-3/8" tube OD on drop spindles.
Part #
9100052 9150046 9150054 9100042 9100053
Ref#
APUBR-10 APUB9 APUB6 APUB3 APUB3
440
6152004 6152005
545**
6152010 6152011
** Please specify 545 Bolt Pattern in either 5-1/2" Hub Flange for 8-12" wheels OR 6-1/2" Hub Flange for 12-15" wheels. 2K axles are standard WITHOUT Brake Flange *** Torflex axles are standard low profile and top mounted.
2,000 lb. Spring Axles difference between Hub Face and Spring Center
Axle Type Straight Drop Minimum 13.00 Minimum 11.50" 15.25" Recommended 14.75" 16.00" Maximum 21.75 Maximum 15.25" 18.00"
TF# 9 - 2,000 lb. Torflex Axles difference between Hub Face and Outside Mounting Bracket
Note: See Suspension (Section B) for detailed Hanger and U-Bolt Kit information.
WWW.TEXTRAIL.COM
A-10
2,000 lb. Torflex Beams* Type Torflex #9 Grease Beam Torflex #9 EZ-Lube Beam 3,500 lb. Torflex Beams* Torflex #10 Grease Beam Torflex #10 EZ-Lube Beam Torflex #10 EZ-Lube V-Bent
Beam
4" Drop BT Grease Beam 4" Drop BT EZ-Lube Beam 3,500 lb. Spring Beams* Straight 84F Grease Beam Straight 84F EZ-Lube Beam 4" Drop 84F Grease Beam 4" Drop 84F EZ-Lube Beam 4,400 lb. Spring Beams* Straight 84F Grease Beam Straight 84F EZ-Lube Beam Straight 42F Grease Beam .191Wall Straight 42F EZ-Lube Beam .191Wall 4" Drop 42F Grease Beam .191Wall 4" Drop 42F EZ-Lube Beam .191Wall Straight 42F Grease Beam 0.250 Wall Straight 42F EZ-Lube Beam 0.250
Wall
6,000 lb. Torflex Beams* Torflex #11 Grease Beam Torflex #11 EZ-Lube Beam 7,000 lb. Spring Beams* Torflex #12 Grease Beam Torflex #12 EZ-Lube Beam 7,200 lb. Torflex Beams* Torflex #12V Grease Beam Torflex #12V EZ-Lube Beam 8,000 lb. Torflex Beams* Torflex #13 Oil Bath Beam Torflex #13 EZ-Lube Beam 6100544 6100545 6100542 6100543 6100540 6100541 6100538 6100539
10,000 lb. General Duty Torflex Beams* 9,000 lb. Spring Beams* Standard Oil Bath Beam Standard Oil Bath Beam Standard Oil Bath Beam Air Beam Standard Oil Bath Beam 6100514 6100515 6100516 6100517 6100394 6100395 6100551 6100393 10,000 lb. General Duty Spring Beams* 10,000 lb. Heavy Duty Spring Beams*
4" Drop 42F Grease Beam 0.250 Wall 4" Drop 42F EZ-Lube Beam 0.250 Wall 7,000 lb. Spring Beams* Straight 42F Grease Beam Straight 42F EZ-Lube Beam 4" Drop 42F Grease Beam 4" Drop 42F EZ-Lube Beam
* Refer to specific axle page for measurement requirements between Hub Face and Spring Center or Outside Bracket.
Torflex Features
Independent wheel suspension and self-clamping action Rubber cushioning eliminates metal-to-metal contact Less transfer of road shock for better cargo protection Heat-treated solid steel inner bar Forged torsion arm for maximum strength Rubber cords compounded for dependability Axle can be used as a load carrying cross member Easy installation with less overall maintenance Low profile availability for maximum road clearance Single or tandem axle assemblies Five-year limited warranty on suspension system
Torflex Features
The Torflex suspension system is a torsion arm type suspension which is completely self contained within the axle tube. It attaches directly to the trailer frame using brackets which are an integral part of the axle assembly. The Torflex axle provides improved suspension characteristics relative to leaf spring axles through the unique arrangement of a steel torsion bar surrounded by four natural rubber cords encased in the main structural member of the axle beam. The wheel/hub spindle is attached to a lever, called the torsion arm, which is fastened to the rubber encased bar. As load is applied, the bar rotates causing a rolling/compressive resistance in the rubber cords. This rotating action provides the same functionality as conventional sprung axles with several operating advantages including independent suspension. Except for periodic inspection of the fasteners used to attach the Torflex axle to the vehicle frame, no other suspension maintenance is required on Torflex axles. They are, of course, subject to the same maintenance and inspection procedures regarding brakes, hubs, bearings, seals, wheels, and tires as outlined in the Dexter Operation Maintenance Service Manual.
Torflex Specifications
Bearing lubrication options: E-Z Lube, Nev-R-Lube, or Oil (7,000 lbs. and above) 600 lbs. - 10,000 lbs. capacities, manufactured to the customers exact requirements Ride heights available: 45 deg down, 22.5 deg down, 10 deg down, 0 deg, 10 deg up, & 22.5 deg up High and low profile brackets with optional mounting brackets available CAUTION: Triple axle assemblies are not recommended for Torflex axles
WWW.TEXTRAIL.COM
A-11
BT8 & BT16 (2K) Replacement Hub & Hub and Drum Components
BT8 GREASE LUBE PARTS
Item
1 2 3
HUBS
Item Part # Ref # Description Bolt Circle
Part #
7700060 7800007 7800046 7800037-01
Ref #
12192TB L44643 L44610
Description
Double Lip Seal 1.983" OD x 1.249" ID Inner / Outer Bearing Cone Inner / Outer Bearing Cup BT8 Bearing Kit (Includes Item 1 - 5)
Plain Hubs
23 7650207 7650012 7650071 7650001 8-91-4 8-91-5 8-259-5 8-258-5 Tapped Stud Stud 8"-12" Wheels Stud 13"-15" Wheels 4 on 4.00 4 on 4.00 5 on 4.50 5 on 4.50 24
Part #
7700083 7800010 7800046 7800038-01
Ref #
10-60 L44649 L44610
Description
Double Lip Seal 1.987" OD x 1.5" ID Inner / Outer Bearing Cone Inner / Outer Bearing Cup BT 16 Bearing Kit (Includes Item 1 - 5)
4 5 6 7 8 9 10 11 12 13
8750003 8750040 8750005 7700024 7700025 7700053 8750046 8750033 8750006 8750030
19-2 5-101 6-1 21-3 21-41-1 85-1 5-151 5-23 6-191 6-190
Cotter Pin Tang Washer EZ Lube (Before 2002) Spindle Nut Grease Cap 1.99" Grease Cap for EZ Lube 1.99" Rubber Plug for EZ Lube Spindle D-Washer 1" ID EZ Lube (Before 2002) Spindle D-Washer 1" ID EZ Lube (After 2002) Spindle Special Jam Nut EZ Lube (After 2002) Spindle Nut Retainer EZ Lube (After 2002)
Plain Hubs
7650012-04 7650071-04 7650071-05 BT8 Hub Kit BT8 5.5" Hub Kit BT8 6.5" Hub Kit 4 on 4.00 5 on 4.50 5 on 4.50
Part #
7700008 7700133 7700045 7700176 7700175 7700043
Ref #
7-40 7-246 6-80 6-201 6-200 6-98
Description
-20 Pressed Wheel Stud -20 Pressed Wheel Stud -20 60 Deg Cone Nut -20 60 Deg Cone Nut Standard Torq-N-GoTM -20 60 Deg Cone Nut Capped Torq-N-GoTM -20 60 Deg Cone Nut Stainless Steel Capped
BT16 H-D Kit BT16 EZ Lube H-D Kit BT16 H-D Kit BT16 EZ Lube H-D Kit
Plain Hubs
7650207-02 7650012-02 7650012-03 8-91-90 8-91-91 8-91-93 8-259-91 8-259-93 8-258-91 8-258-93 BT16 Hub Kit Tapped BT16 Hub Kit BT16 Hub EZ Kit BT16 5.5" Hub Kit BT16 5.5" Hub EZ Kit BT16 6.5" Hub Kit BT16 6.5" Hub EZ Kit 4 on 4.00 4 on 4.00 4 on 4.00 5 on 4.50 5 on 4.50 5 on 4.50 5 on 4.50
7 x 1 BRAKES
Item
20
7650071-02 7650071-03
Part #
6400026 6400027 6400062 6400063
Ref #
23-47 23-48 23-398 23-399
Description
LH Electric Assembly RH Electric Assembly LH Hyd Uni-Servo Assembly RH Hyd Uni-Servo Assembly
7650001-02 7650001-03
WWW.TEXTRAIL.COM
A-12
Magnet Kit LH Actuating Arm RH Actuating Arm Brake Spring Kit (Contains Items 3-6) Shoe Hold Down Clip Retractor Spring Shoe Centering Spring Adjuster Screw and Spring (Contains Items 6-7) Adjuster Screw Spring Adjuster Screw Shoe & Lining Kit Adjuster Plug 7/16"-20 Brake Mounting Nut 7/16"-20 x 0.89" Brake Mounting Pressed Bolt Wire Clip
WWW.TEXTRAIL.COM
A-13
WWW.TEXTRAIL.COM
A-14
REPLACEMENT PARTS
Part #
6450558 6450556 6450560 6450552 6450553 6451000 6451001 6 6450538 6450539 6450529 7 8 9 10 11 12 6450548 6450550 6450551 6450536 6450537 6450630 6450620 6450515 6450516 6450517 6450720 6450721
Part #
6450241 7030116 6450181
Ref #
7-75 5-8 6-17
Description
7/16"-20 x 1-1/4" Grade 8 Bolt 7/16" Lock Washer 7/16"-20 Nut
For Salt Water applications it is recommended the use of Stainless Steel Hardware
Ref #
2RCMHS82 2RCMHS82E 2RCMHS82SCAD
Description
Axle Kit, STD Rotor, E-Coat Caliper Axle Kit, E-Coat Axle Kit, SCAD Rotor, E-Coat Caliper
WWW.TEXTRAIL.COM
A-15
Part #
545 6151100 6151101 6151110 6151111 5475 6151120 6151121 6151129 6151130 550 6151137 6151138 6151145 6151146 555 6151153 6151154 6151162 6151163 655 6151170 6151171 6151181 6151182
Hydraulic 10 x 2-1/4" Single-Servo Hydraulic Straight Hydraulic Straight w/ EZ-Lube Hydraulic Straight w/ Nev-R-Lube Hydraulic 4" Drop Hydraulic 4"Drop w/ EZ-Lube
Hydraulic 10 x 2-1/4" Freeback Hydraulic FB Straight Hydraulic FB Straight w/ EZ-Lube Hydraulic FB Straight w/ Nev-R-Lube Hydraulic FB 4" Drop Hydraulic FB 4"Drop w/ EZ-Lube
Description 1/2" Dia 2-3/8" Round 5-1/2" Long 1/2" Dia 2-3/8" Round 6-1/2" Long 9/16" Dia 2" Square 5-1/2" Long 9/16" Dia 1-3/4" Square 5-1/2" Long
*Axles come with #84 Spindles and 2-3/8" Tube OD or Optional 3" Tube OD Drop Spindles. 3.5K axles are standard WITH Brake Flange
3,500 lb. Spring Axles difference between Hub Face and Spring Center
Axle Type Straight 4 Drop 6 Drop
Minimum Recommended Maximum
Note: See Suspension (Section B) for detailed Hanger and U-Bolt Kit information.
WWW.TEXTRAIL.COM
A-16
Part #
9100004 9100222 6152191
Type
Idler Idler Idler w/ EZ-Lube
545 6152012 6152013 5475 6152022 6152023
Part #
550 6152030 6152031 555 6152038 6152039 655 6152046 6152047
*** Torflex axles are standard low profile and top mounted.
TF# 10 - 3,500 lb. Torflex Axles difference between Hub Face and Outside Mounting Bracket Minimum 12.75" Maximum 23.50"
WWW.TEXTRAIL.COM
A-17
#84 Spindle (3.5K) Replacement Hub & Hub and Drum Components
GREASE LUBE PARTS
Item 1 2 3 4 5 6 Part # 7700085 7800006 7800041 7800046 7800010 8750003 7800059-01 7 8 9 10 11 12 13 8750005 7700024 7700025 7700053 8750033 8750006 8750030 6-1 21-3 21-41-1 85-1 5-23 6-191 6-190 Ref # 10-19 L68149 L68111 L44610 L44649 19-2 Description Double Lip Seal 2.565" OD x 1.719" ID Inner Bearing Cone Inner Bearing Cup Outer Bearing Cup 1.980" OD Outer Bearing Cone Cotter Pin Bearing Kit (Includes Item 1 - 6) Spindle Nut Grease Cap 1.99" Grease Cap EZ Lube 1.99" Rubber Plug EZ Lube Spindle D-Washer 1" ID EZ Lube Spindle Special Jam Nut EZ Lube (After 2002) Spindle Nut Retainer EZ Lube (After 2002) Item 23 21 Item Part # Hubs & Drums 20 7650030 7650032 7650034 7650036 7650038 8-247-5 8-247-12 8-249-7 8-249-5 8-250-5 Stud Stud Stud Stud Stud 5 on 4.50 5 on 4.75 5 on 5.00 5 on 5.50 6 on 5.50
HUBS
Ref # Description Bolt Circle
Plain Hubs 22 7650073 7650075 7650077 7650079 7650081 8-248-5 8-248-10 8-256-7 8-256-5 8-251-5 Stud Stud Stud Stud Stud 5 on 4.50 5 on 4.75 5 on 5.00 5 on 5.50 6 on 5.50
HUBS COMPLETE
Includes bearings, seal, cap & lug nuts. Part # Ref # Description Bolt Circle
Hubs & Drums 7650030-02 7650030-03 7650032-02 7650032-03 7650034-02 7650034-03 7650036-02 8-247-90 8-247-94 8-247-93 8-247-95 8-249-91 8-249-95 8-249-90 8-249-96 8-250-90 8-250-91 Stud Stud EZ Stud Stud EZ Stud Stud EZ Stud Stud EZ Stud Stud EZ 5 on 4.50 5 on 4.50 5 on 4.75 5 on 4.75 5 on 5.00 5 on 5.00 5 on 5.50 5 on 5.50 6 on 5.50 6 on 5.50
10 x 2 BRAKES
Item 19 Part # 6400030 6400033 6400102 6400103 6400060 6400061 6400031 6400032 6400093 6400094 6400095 6400096 6400064 6400065 Ref # 23-26 23-27 23-468 23-469 23-86 23-87 23-312 23-313 23-330 23-331 23-310 23-311 23-344 23-345 Description LH Electric Assembly RH Electric Assembly LH Forward Self-Adjust Electric Assembly RH Forward Self-Adjust Electric Assembly LH Electric Park Assembly RH Electric Park Assembly LH Hydraulic Uni-Servo Assembly RH Hydraulic Uni-Servo Assembly LH Hydraulic Park Uni-Servo Assembly RH Hydraulic Park Uni-Servo Assembly LH Hydraulic Duo-Servo Assembly RH Hydraulic Duo-Servo Assembly LH Hydraulic Free Backing Assembly RH Hydraulic Free Backing Assembly
7650036-03 7650038-02 7650038-03 Plain Hubs 7650073-02 7650073-03 7650075-02 7650075-03 7650077-02 7650077-03 7650079-02 7650079-03 7650081-02 7650081-03
8-248-90 8-248-95 8-248-92 8-248-97 8-256-91 8-256-92 8-256-90 8-256-95 8-251-90 8-251-91
Stud Stud EZ Stud Stud EZ Stud Stud EZ Stud Stud EZ Stud Stud EZ
5 on 4.50 5 on 4.50 5 on 4.75 5 on 4.75 5 on 5.00 5 on 5.00 5 on 5.50 5 on 5.50 6 on 5.50 6 on 5.50
WWW.TEXTRAIL.COM
A-18
Nev-R-Lube #84 Spindle (3.5K) Replacement Hub & Hub and Drum Components
NEV-R-LUBE PARTS 35MM
Item 1 2 3 4 5 Part # 7700125 7700126 7700127 7700128 7700143 Ref #
5-150 6-183 92-2 69-96 21-84
Description Spindle Washer 35MM Spindle Nut 35MM Torque Information Disc 35, 42 & 50MM Snap Ring Hub Cap 35MM
6 on 5.50
"-20 x 1.64" Long Pressed Wheel Stud 35MM Bearing Cartridge 35MM Bearing Retainer
10 x 2 1/4 BRAKES
Item 6 Part # 6400030 6400033 6400060 6400061 6400031 6400032 6400093 6400094 6400095 6400096 6400064 6400065
Ref # 23-26 23-27 23-86 23-87 23-312 23-313 23-330 23-331 23-310 23-311 23-344 23-345
Description LH Electric 3.5K Assembly RH Electric 3.5K Assembly LH Electric 3.5K Assembly w/ Park RH Electric 3.5K Assembly w/ Park LH Hydraulic Uni-Servo Assembly RH Hydraulic Uni-Servo Assembly LH Hydraulic Uni-Servo Assembly w/ Park RH Hydraulic Uni-Servo Assembly w/ Park LH Hydraulic Duo-Servo Assembly RH Hydraulic Duo-Servo Assembly LH Hydraulic Free Backing Assembly RH Hydraulic Free Backing Assembly
Description -20 60 Deg Cone Nut Standard Torq-N-GoTM -20 60 Deg Cone Nut -20 60 Deg Cone Nut Capped Torq-N-GoTM -20 60 Deg Cone Nut Stainless Capped
WWW.TEXTRAIL.COM
A-19
WWW.TEXTRAIL.COM
A-20
Item
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Part # 6400030 6400033 6450165-01 6450227 6450195 6450133 6450134 6450228 6450248 6450226 6450007 6450066 6450222 6450186 6450099 6450241 6450038 6450181 6450001
Ref # 23-26 23-27 71-104 42-97-1 46-80 27-9 47-19 47-20 46-9 5-67 46-18 43-4 71-47 46-77 49-2 27-5 7-41 46-7 6-17 46-16
WWW.TEXTRAIL.COM
A-21
Ref #
23-468 23-469 71-104 42-97-1
Qty/Brk
1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 2 2 1 1 1 1 1 1 2 4 1 4 1
Description
LH FSA Electric Assembly RH FSA Electric Assembly Magnet Kit 3.5K Oval Magnet for Dexter 10 Electric Brakes Magnet Spring Magnet Retaining Clip LH Actuating Arm RH Actuating Arm Retractor Spring Wing Washer for Brake Shoe Adjuster Screw Spring LH Adjuster Screw Assembly RH Adjuster Screw Assembly LH Shoe & Lining Kit (Includes Item 11-12) RH Shoe & Lining Kit (Includes Item 11-12) Shoe Hold Down Spring & Cup Shoe Hold Down Pin LH Lever Spring RH Lever Spring LH Adjusting Lever RH Adjusting Lever Adjuster Cable Hook for FSA Cable Magnet Wire Retaining Clip 7/16"-20 x 0.89" Brake Mounting Pressed Bolt Adjuster Plug 7/16"-20 Brake Mounting Nut Wire Grommet 0.437 Dia.
2 3 4
46-80 27-9 47-19 47-20 46-9 5-67 46-139 48-22 48-23 71-681 71-682 46-77 49-2 46-140 46-141 71-530-1 71-530-2 71-533 71-529 27-5 7-41 46-7 6-17 46-16
5 6 7 8
6450293 6450294
10 11 12
13
*** ***
14 15 16 17 18 19 20
*** Parts are only replaceable through purchase of FSA Electric Brake Repair Kits
WWW.TEXTRAIL.COM
A-22
1 2 3 4 5 6 7 8 9 10 11 12 13 14
WWW.TEXTRAIL.COM
A-23
WWW.TEXTRAIL.COM
A-24
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
6450226 6450007 6450051 6450222 6450186 6450190 6450256 6450107 6450108 6450250 6450251
23-400 23-401 23-330 23-331 46-9 5-113 46-103 47-118 46-18 43-4 71-267 46-77 49-2 69-55 5-112 54-60 54-62 54-63 54-64 54-65 47-116-1 47-117-1 7-41 46-7 6-17 87-1 71-514
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1/2 1 1 1 1 1 1 4 1 4 2 1
LH Duo-Servo Hydraulic Brake Assembly RH Duo-Servo Hydraulic Brake Assembly LH Uni-Servo Hydraulic Brake Assembly RH Uni-Servo Hydraulic Brake Assembly Retractor Spring Anchor Post Washer Parking Strut Spring Parking Strut Adjusting Screw Spring Adjuster Assembly Shoe & Lining Kit Shoe Hold Down Spring & Cup Shoe Hold Down Pin Retainer Horseshoe Park Lever Washer 3/8" x 0.013 Cylinder Push Rod US (1) DS (2) LH Duo-Servo Wheel Cylinder RH Duo-Servo Wheel Cylinder LH Uni-Servo Wheel Cylinder RH Uni-Servo Wheel Cylinder LH Parking Lever and Pin RH Parking Lever and Pin 7/16"-20 x 0.89" Pressed Brake Mounting Stud Adjuster Slot Plug 7/16"-20 Brake Mounting Hex Nut Sems (screw & washer assembly) 5/16"-18 x 0.62 Park Brake Cable
A-25
WWW.TEXTRAIL.COM
REPLACEMENT PARTS
Part #
6450558 6450556 6450560 6450552 6450553 6451000 6451001
Ref #
DBCMHGB DBCMHBS DBCMHBSB DBCFIFMP90 DBCNPTADPBBS DBCNPTBBS DBCNPTADP
Ref #
10-19 L68149 L68111 L44610 L44649 5-23 6-1 19-2 21-3 21-41-1 85-1 LB169 7-122 LB2.0 7-262 6-80 6-201 6-80 6-200 6-98
Part #
6450241 7030116 6450181
Ref #
7-75 5-8 6-17
Description
7/16"-20 x 1-1/4" Grade 8 Bolt 7/16" Lock Washer 7/16"-20 Nut
Ref #
2HRCM10-K 2HRCM10E-K 2HRCM10ESCAD-K 2HRCM10SCAD-K 2HRCM10SCADSS-K
Description
Axle Kit, STD Rotor, E-Coat Caliper Axle Kit, E-Coat Axle Kit, SCAD Rotor, E-Coat Caliper Axle Kit, SCAD Axle Kit, SCAD Rotor, SS Caliper
For Salt Water applications it is recommended the use of Stainless Steel Hardware
Kodiak's offers the ONLY complete ALL STAINLESS STEEL Disc Brake Set in the Industry. Stainless Steel is the best available corrosive resistant material. The Stainless Steel Kits come with a 6 Year Warranty verses the Standard 3 Year Limited Warranty.
6450508
6450510
WWW.TEXTRAIL.COM
A-26
REPLACEMENT PARTS
Item 1 2 3 4 5 Part # 6450558 6450556 6450560 6450552 6450553 6451000 6451001
Mounting Hardware
Not Included in Kits Below Ref # Description DBCMHGB Stainless Steel Guide Bolt M11 x 1.5 Item Part # Ref # Description DBCMHBS Stainless Steel Sleeve 13 6450241 7-75 7/16"-20 x 1-1/4" Grade 8 Bolt DBCMHBSB Rubber Bushing for Guide Bolt 14 7030116 5-8 7/16" Lock Washer DBCFIFMP90 Adapter Port 90 deg 1/8" NPT to 3/16" FIF 15 6450181 6-17 7/16"-20 Nut DBCNPTADPBBS Bleed Port / Screw Assy (Contains Next 2 Items) For Salt Water applications it is recommended the use of Stainless Steel Hardware DBCNPTBBS Bleed Screw Port 1/4"-28 DBCNPTADP Bleed Screw Adapter 1/8" Rotor Only Kits Caliper comes w/ items 1-9 Includes Items 1 thru 12 6 6450527 DBC225E Caliper E-Coat Item Part # Ref # Description 6450528 DBC225SCAD Caliper Silver Cadmium Plated 6450500 2RCM10-K Axle Kit, STD Rotor, E-Coat Caliper 6450529 DBC225SS Caliper Stainless Steel 6450501 2RCM10E-K Axle Kit, E-Coat 7 6450548 DBC225PISTONSS 2-1/4" Stainless Steel Piston 6450502 2RCM10ESCAD-K Axle Kit, E-Coat, SCAD Caliper 8 6450550 DBC225SEAL Piston Rubber Seal 6450503 2RCM10SCAD-K Axle Kit, SCAD 9 6450551 DBC225BOOT Rubber Dust Boot 6500504 2RCM10SCADSS-K Axle Kit, SCAD Rotor, SS Caliper 10 6450533 CMB10U Caliper Mounting Bracket E-Coat 6500505 2RCM10SS-K Axle Kit, Stainless Steel 6450534 CMB10USCAD Caliper Mounting Bracket SCD 6450535 CMB10USS Caliper Mounting Bracket SS 11 6450630 DBC225SMPAD Brake Pads (Semi-Metallic) 6450620 DBC225CERMPAD Brake Pads (Ceramic) 12 6450518 ROTOR10 545 10" Rotor Standard Automotive Finish 6450519 ROTOR10E 545 10" Rotor E-Coat 6450520 ROTOR10SCAD 545 10" Rotor Silver Cadmium Plated 6450521 ROTOR10SS 545 10" Rotor Stainless Steel Kodiak's offers the ONLY complete ALL STAINLESS STEEL Disc Brake Set in the Industry. Stainless Steel is the best available corrosive resistant material. The Stainless Steel Kits come with a 6 Year Warranty verses the Standard 3 Year Limited Warranty.
6450501
6450503
6450505
WWW.TEXTRAIL.COM
A-27
*Axles come with #84 Spindles and 3" OD Tube. 4.4K axles are standard WITH Brake Flange
4,400 lb. Spring Axles difference between Hub Face and Spring Center
Axle Type Straight
Minimum 12.00 Recommended 16.00 Maximum 19.00
Note: See Suspension (Section B) for detailed Hanger and U-Bolt Kit information.
WWW.TEXTRAIL.COM
A-28
#84 Spindle (4.4K) Replacement Hub & Hub and Drum Components
GREASE LUBE PARTS
Item
1 2 3 4 5 6
HUBS
Item 15 Part #
7650151
Part #
7700085 7800006 7800041 7800045 7800043 8750003 7800061-02
Ref #
10-19 L68149 L68111 LM67010 LM67048 19-2
Description
Double Lip Seal 2.565" OD x 1.719" ID Inner Bearing Cone Inner Bearing Cup Outer Bearing Cup 2.328" OD Outer Bearing Cone Cotter Pin Bearing Kit (Includes Item 1 - 6)
Ref #
Description
Stud
Bolt Circle
6 on 5.50
Plain Hubs
HUBS COMPLETE
Includes bearings, seal, cap & lug nuts. Item
Part #
Ref #
Description
Stud Stud EZ
Bolt Circle
7 8 9 10 11 12 13
Spindle Nut Grease Cap 2.45" Grease Cap EZ Lube 2.45" Rubber Plug EZ Lube Spindle D-Washer 1" ID EZ Lube Spindle Special Jam Nut EZ Lube (After 2002) Spindle Nut Retainer EZ Lube (After 2002)
6 on 5.50 6 on 5.50
Description -20 Pressed Wheel Stud -20 60 Deg Cone Nut -20 60 Deg Cone Nut Standard Torq-NGoTM -20 60 Deg Cone Nut Capped Torq-NGoTM -20 60 Deg Cone Nut Stainless Steel Capped
10 x 2 BRAKES
Item
14 Part # 6400078 6400079
Ref # 23-454 23-455
Description
6-200
6-98
WWW.TEXTRAIL.COM
A-29
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
WWW.TEXTRAIL.COM
A-30
6K Light Duty Axles Light Duty Axles .191 Wall Type Idler Idler Straight w/ Grease Idler Straight w/ EZ-Lube Idler Straight w/ Oil Idler 4" Drop w/ Grease Idler 4"Drop w/ EZ-Lube Idler 4"Drop w/ Oil Electric 12" x 2" Electric Straight w/ Grease Electric Straight w/ EZ-Lube Electric Straight w/ Oil Electric Straight w/ Nev-R-Lube Electric 4" Drop w/ Grease Electric 4"Drop w/ EZ-Lube Electric 4"Drop w/ Oil Hydraulic 12" x 2" Single-Servo Hydraulic Straight w/ Grease Hydraulic Straight w/ EZ-Lube Hydraulic Straight w/ Oil Hydraulic Straight w/ Nev-R-Lube Hydraulic 4" Drop w/ Grease Hydraulic 4"Drop w/ EZ-Lube Hydraulic 4"Drop w/ Oil Hydraulic 12" x 2" Duo-Servo Hydraulic Straight w/ Grease Hydraulic Straight w/ EZ-Lube Hydraulic Straight w/ Oil Hydraulic Straight w/ Nev-R-Lube Hydraulic 4" Drop w/ Grease Hydraulic 4"Drop w/ EZ-Lube Hydraulic 4"Drop w/ Oil Hydraulic 12" x 2" Freeback Hydraulic FB Straight w/ Grease Hydraulic FB Straight w/ EZ-Lube Hydraulic FB Straight w/ Oil Hydraulic FB Straight w/ Nev-R-Lube Hydraulic FB 4" Drop w/ Grease Hydraulic FB 4"Drop w/ EZ-Lube Hydraulic FB 4"Drop w/ Oil Hydraulic Disc Hydraulic Straight Hydraulic Straight w/ EZ-Lube Hydraulic Straight w/ Nev-R-Lube Hydraulic 4" Drop Hydraulic 4"Drop w/ EZ-Lube Part # 5 Spoke 6151247 6151248 6151249 6151262 6151263 6151264 5 Spoke 6151250 6151251 6151252 n/a 6151265 6151266 6151267 5 Spoke 6151253 6151255 6151257 n/a 6151268 6151271 6151273 5 Spoke 6151259 6151260 6151261 n/a 6151275 6151276 6151277 5 Spoke 6151254 6151256 6151258 n/a 6151269 6151272 6151274 5 Spoke n/a n/a n/a n/a n/a n/a 655 6151198 6151201 n/a 6151202 6151213 6151215 n/a 655 6151194 6151195 6151196 6151210 6151211 655 6151189 6151190 n/a 6151206 6151207 n/a 655 6151191 6151192 n/a 6151193 6151208 6151209 n/a 655 6151197 6151199 n/a 6151200 6151212 6151214 n/a 655 6151203 6151204 n/a 6151205 6151216 865 6151217 6151218 6151219 6151232 6151233 6151234 865 6151220 6151221 6151222 n/a 6151235 6151236 6151237 865 6151223 6151225 6151227 n/a 6151238 6151240 6151242 865 6151229 6151230 6151231 n/a 6151244 6151245 6151246 865 6151224 6151226 6151228 n/a 6151239 6151241 6151243 865 n/a n/a n/a n/a n/a
6K Heavy Duty Axles Heavy Duty Axles .250 Wall Part # 5 Spoke 6151342 6151343 6151344 6151357 6151358 6151359 5 Spoke 6151345 6151346 6151347 n/a 6151360 6151361 6151362 5 Spoke 6151348 6151350 6151352 n/a 6151363 6151365 6151367 5 Spoke 6151354 6151355 6151356 n/a 6151369 6151370 6151371 5 Spoke 6151349 6151351 6151353 n/a 6151364 6151366 6151368 5 Spoke n/a n/a n/a n/a n/a 655 6151278 6151279 n/a 6151295 6151296 n/a 655 6151280 6151281 n/a 6151282 6151297 6151298 n/a 655 6151286 6151288 6151289 n/a 6151301 6151303 n/a 655 6151292 6151293 6151294 n/a 6151305 6151306 n/a 655 6151287 6151290 6151291 n/a 6151302 6151304 n/a 655 6151283 6151284 6151285 6151299 6151300 865 6151307 6151311 6151308 6151326 6151327 6151328 865 6151309 6151310 6151312 6151313 6151329 6151330 6151331 865 6151314 6151316 6151318 6151319 6151332 6151334 6151336 865 6151322 6151323 6151324 6151325 6151338 6151340 6151341 865 6151315 6151317 6151320 6151321 6151333 6151335 6151337 865 n/a n/a n/a n/a n/a
Light Duty 6,000 lb. Spring Axles difference between Hub Face and Spring Center Axle Type Straight Drop Minimum 12.75" 15.75"
Recommended
16.00" 18.50"
Heavy Duty 6,000 lb. Spring Axles difference between Hub Face and Spring Center Axle Type Straight Drop Minimum 12.75" 15.75"
Recommended
16.25" 18.00"
STD #42 Spindle and 3" OD Tube 0.250" Wall Opt 3.5" OD Tube with 0.500" Wall
WWW.TEXTRAIL.COM
A-31
7,000 lb.
Type Idler Idler Straight w/ Grease Idler Straight w/ EZ-Lube Idler Straight w/ Oil Idler 4" Drop w/ Grease Idler 4"Drop w/ EZ-Lube Idler 4"Drop w/ Oil Electric 12" x 2" Electric Straight w/ Grease Electric Straight w/ EZ-Lube Electric Straight w/ Oil Electric Straight w/ Nev-R-Lube Electric 4" Drop w/ Grease Electric 4"Drop w/ EZ-Lube Electric 4"Drop w/ Oil Hydraulic 12" x 2" Single-Servo Hydraulic Straight w/ Grease Hydraulic Straight w/ EZ-Lube Hydraulic Straight w/ Oil Hydraulic Straight w/ Nev-R-Lube Hydraulic 4" Drop w/ Grease Hydraulic 4"Drop w/ EZ-Lube Hydraulic 4"Drop w/ Oil Hydraulic 12" x 2" Duo-Servo Hydraulic Straight w/ Grease Hydraulic Straight w/ EZ-Lube Hydraulic Straight w/ Oil Hydraulic Straight w/ Nev-R-Lube Hydraulic 4" Drop w/ Grease Hydraulic 4"Drop w/ EZ-Lube Hydraulic 4"Drop w/ Oil Hydraulic 12" x 2" Freeback Hydraulic FB Straight w/ Grease Hydraulic FB Straight w/ EZ-Lube Hydraulic FB Straight w/ Oil Hydraulic FB Straight w/ Nev-R-Lube Hydraulic FB 4" Drop w/ Grease Hydraulic FB 4"Drop w/ EZ-Lube Hydraulic FB 4"Drop w/ Oil Part # 5 Spoke 6151414 6151415 6151416 6151429 6151430 6151431 5 Spoke 6151417 6151418 6151419 n/a 6151432 6151433 6151434 5 Spoke 6151420 6151422 6151424 n/a 6151435 6151437 6151439 5 Spoke 6151426 6151427 6151428 n/a 6151441 6151442 6151443 5 Spoke 6151421 6151423 6151425 n/a 6151436 6151438 6151440 865 6151380 6151381 6151382 6151399 6151400 6151401 865 6151383 6151384 6151385 6151386 6151402 6151403 6151404 865 6151387 6151389 6151391 6151392 6151405 6151407 6151409 865 6151395 6151396 6151397 6151398 6151411 6151412 6151413 865 6151388 6151390 6151393 6151394 6151406 6151408 6151410
7,200 lb.
Part # 865 9/16" Studs 6151461 6151460 n/a 6151471 6151470 865 6151450 6151451 6151452 9/16" Studs n/a 6151463 6151462 6151464 6151453 6151454 6151455 n/a 6151473 6151472 9/16" Studs n/a 6151469 6151468 n/a n/a 6151477 6151476 9/16" Studs n/a 6151466 6151465 6151467 n/a 6151475 6151474
8,000 lb.
865 5/8" Studs (Flange Nut) 6151602 6151600 n/a 6151622 6151620 (Flange Nut) n/a 6151606 6151604 6151608 n/a 6151626 6151624 (Flange Nut) n/a 6151618 6151616 n/a n/a 6151478 6151631 (Flange Nut) n/a 6151612 6151610 6151614 n/a 6151633 6151629 865 5/8" Studs (6-109) 6151603 6151601 n/a 6151623 6151621 (6-109) n/a 6151607 6151605 6151609 n/a 6151627 6151625 (6-109) n/a 6151619 6151617 n/a n/a 6151479 6151632 (6-109) n/a 6151613 6151611 6151615 n/a 6151634 6151630
8,000 lb. Spring Axles difference between Hub Face and Spring Center Axle Type Straight Drop Minimum 16.00" 18.00"
Recommended
7,000 lb. Spring Axles difference between Hub Face and Spring Center Axle Type Straight Drop Minimum 13.00 15.75
Recommended
16.25 17.75
7,200 lb. Spring Axles difference between Hub Face and Spring Center Axle Type Straight Drop Minimum 14.00 15.75
Recommended
15.00 16.00
19.00" 19.00"
WWW.TEXTRAIL.COM
A-32
Part #
9100002 9100223 6152191
Type
Idler Idler Idler w/ EZ-Lube Idler w/ Oil Electric 12 x 2" Electric Electric w/ EZ-Lube Electric w/ Oil Electric w/ Nev-R-Lube Hydraulic 12 x 2" Single-Servo Hydraulic Hydraulic w/ EZ-Lube Hydraulic w/ Oil Hydraulic w/ Nev-R-Lube Hydraulic 12 x 2" Duo-Servo Hydraulic Hydraulic w/ EZ-Lube Hydraulic w/ Oil Hydraulic w/ Nev-R-Lube Hydraulic 12 x 2" Freeback
655 6152057 6152058 n/a
Part #
865 6152074 6152075 6152076 UTG 6152093 6152094 6152095
Hydraulic FB Hydraulic FB w/ EZ-Lube Hydraulic FB w/ Oil Hydraulic FB w/ Nev-R-Lube Hydraulic Disc Hydraulic Disc Hydraulic Disc w/ EZ-Lube Hydraulic Disc w/ Nev-R-Lube
WWW.TEXTRAIL.COM
A-33
Idler w/ EZ-Lube Idler w/ Oil Electric 12 x 2" Electric Electric w/ EZ-Lube Electric w/ Oil Electric w/ Nev-R-Lube Hydraulic 12 x 2" Single-Servo Hydraulic Hydraulic w/ EZ-Lube Hydraulic w/ Oil Hydraulic w/ Nev-R-Lube Hydraulic 12 x 2" Duo-Servo Hydraulic Hydraulic w/ EZ-Lube Hydraulic w/ Oil Hydraulic w/ Nev-R-Lube Hydraulic 12 x 2" Freeback Hydraulic FB Hydraulic FB w/ EZ-Lube Hydraulic FB w/ Oil Hydraulic FB w/ Nev-R-Lube
*** Torflex axles are standard low profile and top mounted.
TF# 12 - 7,000 lb. Torflex Axles difference between Hub Face and Outside Mounting Bracket
Minimum 15.00 Maximum 30.25
WWW.TEXTRAIL.COM
A-34
TF12V Side Mount Hanger Kit - Weld On Aluminum TF12V High Profile Mount Brackets
*** Torflex axles are standard low profile and top mounted.
TF# 12V - 7,200 lb. Torflex Axles difference between Hub Face and Outside Mounting Bracket
Minimum 14.00 Maximum 29.50"
*** Torflex axles are standard low profile and top mounted.
TF# 13 - 8,000 lb. Torflex Axles difference between Hub Face and Outside Mounting Bracket
Minimum 18.00 A-35 Maximum 43.00
WWW.TEXTRAIL.COM
X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X
X X X X X X X X X X X X X X X X
X X X X X X X X X X X X X X X X
X X X X X X X X X X X X X X X X X X X X X
X X
X X
X X X X
Note: See Suspension (Section B) for detailed Spring, Hanger and U-Bolt Kit information.
WWW.TEXTRAIL.COM
A-36
HUBS
Item
Part #
7700073 7700088 7700086
Ref #
10-36 10-63 10-10
Description
Double Lip Seal 3.376"OD x 2.250"ID Unitized Oil Seal 3.376"OD x 2.250"ID Double Lip Seal 3.376"OD x 2.125"ID (Before 10/'97)
Part #
7650133 7650041
Ref #
8-201-5 8-201-9
Description
Stud 5.2K 2.125" SEAL Stud 5.2-6K 2.250" SEAL
Bolt Circle
Plain Hubs
7650097 8-213-8 8-213-5 8-213-9
2 3 4 * 5 * 6 7 8 9 10 11 12 13
7800026 7800054 7800055 7800045 7800027 7800043 8750003 8750005 7700027 7700016 7700053 8750033 8750006 8750030 8750040
25580 25520 15245 LM67010 15123 LM67048 19-2 6-1 21-1 21-42-1 85-1 5-23 6-191 6-190 5-101
Inner Bearing Cup Inner Race Cone Outer Bearing Cup Outer Bearing Cup (6K LT) Outer Bearing Cone Outer Bearing Cone (6K LT) Cotter Pin Spindle Nut Grease Cap 2.44" Grease Cap EZ Lube 2.44" Rubber Plug EZ Lube Spindle D-Washer 1" ID EZ Lube Spindle Special Jam Nut EZ Lube (After 2002) Spindle Nut Retainer EZ Lube (After 2002) Spindle Tang Washer EZ Lube (Before 2002) 21
7650135 7650085
Part #
7650133-02 7650133-03 7650041-02 7650041-03
Ref #
8-201-90 8-201-94 8-201-9A 8-201-9B
Description
Bolt Circle
Plain Hubs * *
7650135-02 7650135-03 7650085-04 7650085-05 8-213-90 8-213-95 8-213-96 8-213-9C
Stud for 5.2K 2.125" SEAL Stud for 5.2K EZ 2.125" SEAL 15123 for 6K 2.25" SEAL 15123 for 6K EZ 2.25" SEAL
12 x 2 BRAKES
Item 22
Part #
7700109 7700142 7700176 7700045 7700175 7700043
Ref #
7-122 7-262 6-201 6-80 6-200 6-98
Description
-20 x 1.84" Long Pressed Wheel Stud** -20 x 2.50" Long Pressed Wheel Stud** -20 60 Deg Cone Nut Standard Torq-N-GoTM -20 60 Deg Cone Nut -20 60 Deg Cone Nut Capped Torq-N-GoTM -20 60 Deg Cone Nut Stainless Capped
Part #
6400010 6400036 6400046 6400047 6400068 6400097 6400008 6400009
Ref #
23-105 23-106 23-324 23-325 23-322 23-323 23-342 23-343
Description
LH Electric Assembly RH Electric Assembly LH Hydraulic Uni-Servo Assembly RH Hydraulic Uni-Servo Assembly LH Hydraulic Duo-Servo Assembly RH Hydraulic Duo-Servo Assembly LH Hydraulic Free Backing Assembly RH Hydraulic Free Backing Assembly
Item 14 - Hubs prior to 1/2004 Item 15 - Hubs after to 1/2004 ** Stud length measured under head to end of stud.
WWW.TEXTRAIL.COM
A-37
Part #
7700129 7700126 7700127 7700128 7700130
Ref #
5-147-1 6-183 92-2 69-96 21-85
Description
Spindle Washer 42MM Spindle Nut 42MM Torque Information Disc 35, 42 & 50MM Snap Ring Hub Cap 42MM
Part #
7650100
Ref #
8-388-80
Description
"-20 Stud 5.2K Includes:
Bolt Circle
"-20 x 1.84" Long Pressed Wheel Stud 42MM Bearing Cartridge 42MM Bearing Retainer
12 x 2 BRAKES Item
6
Part #
6400010 6400036 6400046 6400047 6400068 6400097 6400066 6400067 6400069 6400070 6400071 6400072 6400008 6400009
Ref #
23-105 23-106 23-324 23-325 23-322 23-323 23-338 23-339 23-334 23-335 23-336 23-337 23-342 23-343
Description
LH Electric 6K Assembly RH Electric 6K Assembly LH Hydraulic Uni-Servo Assembly RH Hydraulic Uni-Servo Assembly LH Hydraulic Duo-Servo Assembly RH Hydraulic Duo-Servo Assembly LH Hydraulic Uni-Servo 7K Assembly RH Hydraulic Uni-Servo 7K Assembly LH Hydraulic Uni-Servo 7K Assembly w/Park RH Hydraulic Uni-Servo 7K Assembly w/Park LH Hydraulic Duo-Servo 7K Assembly RH Hydraulic Duo-Servo 7K Assembly LH Hydraulic Free Backing Assembly RH Hydraulic Free Backing Assembly
Part #
7700176 7700045 7700175 7700043
Ref #
6-201 6-80 6-200 6-98
Description
-20 60 Deg Cone Nut Standard Torq-N-GoTM -20 60 Deg Cone Nut -20 60 Deg Cone Nut Capped Torq-N-GoTM -20 60 Deg Cone Nut Stainless Capped
WWW.TEXTRAIL.COM
A-38
HUBS
Description Bolt Circle
9/16 Stud Grease 5.2-7K 9/16 Stud Oil 5.2-7K Stud Grease 5.2-7K 9/16 Stud Grease 5.2-7K 5/8" Stud Grease 5.2-7K Stud Oil 5.2-7K 9/16 Stud Oil 5.2-7K 5/8" Stud Oil 5.2-7K
Stud Grease 5.2-7K 9/16 Stud Grease 5.2-7K 5/8" Stud Grease 5.2-7K Stud Oil 5.2-7K
HUBS COMPLETE
Includes bearings, seal, cap & lug nuts. Item Hubs & Drums 7650047-02 7650045-02 7650045-03 7650044-03 8-174-90 8-219-9D 8-219-9B 8-219-9E 9/16" Stud Grease 5.2-7K Stud Grease 5.2-7K Stud EZ 5.2-7K Stud Oil 5.2-7K 5 Spoke 8 on 6.50 8 on 6.50 8 on 6.50 Part # Ref # Description Bolt Circle
8 on 6.50
12 x 2 BRAKES
Description LH Electric DXQ-6K Assy RH Electric DXQ-6K Assy LH Electric Forward Self Adjust 6K Assy RH Electric Forward Self Adjust 6K Assy LH Electric 7K Assy RH Electric 7K Assy LH Electric Forward Self Adjust 7K Assy RH Electric Forward Self Adjust 7K Assy LH Hydraulic Uni-Servo 7K Assy RH Hydraulic Uni-Servo 7K Assy LH Hydraulic Uni-Servo 7K Park Assy RH Hydraulic Uni-Servo 7K Park Assy LH Hydraulic Duo-Servo 7K Assy RH Hydraulic Duo-Servo 7K Assy LH Hydraulic Free Backing 7K Assy RH Hydraulic Free Backing 7K Assy
6400082 6400037 6400038 6400083 6400084 6400066 6400067 6400069 6400070 6400071 6400072 6400008 6400009
WWW.TEXTRAIL.COM
A-39
Part #
7700131 7700129
Ref #
5-149
5-147-1
Description
Spindle Washer 50MM Spindle Washer 42MM Spindle Nut Torque Information Disc 35, 42 & 50MM Snap Ring Hub Cap 50MM Hub Cap 42MM
Part #
7650101
Ref #
8-385-82
Description
"-20 Stud 6-7K Includes:
Bolt Circle
2 3 4 5
"-20 x 1.84" Long Pressed Wheel Stud 50MM Bearing Cartridge 50MM Bearing Retainer 9/16"-18 Stud 6-7K Includes:
8 on 6.50
7700123
9/16"-18 x 2" Long Pressed Wheel Stud 50MM Bearing Cartridge 50MM Bearing Retainer 5/8"-18 Stud 6-7K Includes:
8 on 6.50
12 x 2 BRAKES Item
6
Part #
6400010 6400036 6400037 6400038 6400066 6400067 6400069 6400070 6400071 6400072 6400008 6400009
Ref #
23-105 23-106 23-180 23-181 23-338 23-339 23-334 23-335 23-336 23-337 23-342 23-343
Description
LH Electric Assembly RH Electric Assembly LH Electric 7K Assembly RH Electric 7K Assembly LH Hydraulic Uni-Servo 7K Assembly RH Hydraulic Uni-Servo 7K Assembly LH Hydraulic Uni-Servo 7K Assembly w/Park RH Hydraulic Uni-Servo 7K Assembly w/Park LH Hydraulic Duo-Servo 7K Assembly RH Hydraulic Duo-Servo 7K Assembly LH Hydraulic Free Backing Assembly RH Hydraulic Free Backing Assembly
5/8"-18 x 2.5" Long Pressed Wheel Stud 50MM Bearing Cartridge 50MM Bearing Retainer "-20 Stud 6K Includes:
6 on 5.50
"-20 x 1.84" Long Pressed Wheel Stud 42MM Bearing Cartridge 42MM Bearing Retainer
Part #
7700176 7700045 7700036 7700048 7700175 7700043
Ref #
6-201 6-80 6-53 6-109 6-200 6-98
Description
-20 60 Deg Cone Nut Standard Torq-NGoTM
-20 60 Deg Cone Nut 9/16"-18 60 Deg Cone Nut Zinc Plated 5/8"-18 60 Deg Cone Nut Zinc Plated -20 60 Deg Cone Nut Capped Torq-N-GoTM -20 60 Deg Cone Nut Stainless Capped
WWW.TEXTRAIL.COM
A-40
HUBS
Description Bolt Circle
(Before 5/00 with stamped backing plate) 9/16 Stud Oil 7.2K 8 on 6.50
(Before 5/00 with stamped backing plate) 5/8 Stud Grease 7.2K 8 on 6.50
(Before 5/00 with stamped backing plate) 5/8 Stud Oil 7.2K 8 on 6.50
HUBS COMPLETE
Includes bearings, seal, cap & lug nuts. Ref # Description Bolt Circle
Hubs & Drums 7650197-02 8-393-91 9/16" Stud Grease 7.2K (After 5/00 with cast backing plate) 7650061-02 8-355-93 9/16" Stud Grease 7.2K 8 on 6.50 8 on 6.50
12 x 2 BRAKES
Description Dust Shield (not included with brake assembly) (After 5/00 with cast backing plate) 36-110 Dust Shield Top (included with brake assembly) (Before 5/00 with stamped backing plate) 36-110-01 Dust Shield Top (included with brake assembly) (Before 5/00 with stamped backing plate) 23 6400057 23-428 LH Electric 7.2K Assy (4-Bolt) (After 5/00 with cast backing plate) 6400058 23-429 RH Electric 7.2K Assy (4-Bolt) (After 5/00 with cast backing plate) 6400011 23-370 LH Electric 7.2K Assy (9-Bolt) (Before 5/00 with stamped backing plate) 6400012 23-369 RH Electric 7.2K Assy (9-Bolt) (Before 5/00 with stamped backing plate)
WWW.TEXTRAIL.COM
A-41
7.2K NEV-R-LUBE
NEV-R-LUBE PARTS 50MM Item
1 2 3 4 5
Part #
7700131 7700126 7700127 7700128 7700132
Ref #
5-149 6-183 92-2 69-96 21-86
Description
Spindle Washer 50MM Spindle Nut Torque Information Disc 35, 42 & 50MM Snap Ring Hub Cap 50MM
Part #
Ref #
8-395-80
Description
9/16 Stud Nev-R-Lube 7.2K Includes:
Bolt Circle
9/16"-18 x 2" Long Pressed Wheel Stud 50MM Bearing Cartridge 50MM Bearing Retainer 5/8 Stud Nev-R-Lube 7.2K Includes: 8 on 6.50
Part #
6450113 6400057 6400058
Ref #
36-115-20
Description
Dust Shield LH Electric 7.2K Assembly RH Electric 7.2K Assembly
5/8"-18 x 2.5" Long Pressed Wheel Stud 50MM Bearing Cartridge 50MM Bearing Retainer
23-428 23-429
Part #
7700036 7700048 7700034
Ref #
6-53 6-109 6-58
Description
9/16"-18 60 Deg Cone Nut Zinc Plated 5/8"-18 60 Deg Cone Nut Zinc Plated 5/8"-18 Flange Nut Zinc Plated
8K NEV-R-LUBE
NEV-R-LUBE PARTS 50MM Item
1 2 3 4 5
Part #
7700131 7700126 7700127 7700128 7700132
Ref #
5-149 6-183 92-2 69-96 21-86
Description
Spindle Washer 50MM Spindle Nut Torque Information Disc 35, 42 & 50MM Snap Ring Hub Cap 50MM
Part #
Ref #
8-389-80
Description
5/8 Stud Nev-R-Lube 8K Includes:
Bolt Circle
5/8"-18 x 2.5" Long Pressed Wheel Stud 50MM Bearing Cartridge 50MM Bearing Retainer 9/16 Stud Nev-R-Lube 8K Includes: 8 on 6.50
Part #
6450113 6400039 6400040 6400041 6400042
Ref #
36-115-20
Description
Dust Shield LH Electric 8K Assembly RH Electric 8K Assembly LH Hydraulic Duo-Servo 8K Assembly RH Hydraulic Duo-Servo 8K Assembly
9/16"-18 x 2" Long Pressed Wheel Stud 50MM Bearing Cartridge 50MM Bearing Retainer
Part #
7700036 7700048
Ref #
6-53 6-109
Description
9/16-18 60 Deg Cone Nut Zinc Plated 5/8-18 60 Deg Cone Nut Zinc Plated
WWW.TEXTRAIL.COM
A-42
HUBS
Item Part # Ref # Description
Bolt Circle
Ref #
10-36 10-63 25580 25520 02420 02475 19-2 6-1 10-45 21-35 46-32 46-52
Description Double Lip Seal 3.376"OD x 2.250"ID Unitized Oil Seal 3.376"OD x 2.250"ID Inner Bearing Cup Inner Race Cone Outer Bearing Cup Outer Bearing Cone Cotter Pin Spindle Nut O-ring Oil Cap Oil Cap Plug Oil Fill Hole Plug Oil Cap Kit (Includes Items 8-10) Grease Cap 2.72" Grease Cap EZ Lube 2.72" Grease Cap EZ Lube Chrome 2.72" Rubber Plug EZ Lube Spindle D-Washer 1" ID Special Jam Nut EZ Lube (After '02) Nut Retainer EZ Lube (After '02) Tang Washer EZ Lube (Before '02)
Hubs & Drums 21 7650155 7650051 7650053 Plain Hubs 7650138 7650212
8-287-14 8-287-11 8-285-8 8-285-11 8-285-10 8-285-9
5/8 Stud Grease 8K 9/16" Stud Grease 8K 5/8 Stud Oil 8K 9/16 Stud Oil 8K
8 on 6.50 8 on 6.50
HUBS COMPLETE
Includes bearings, seal, cap & lug nuts. Item Part # Ref # Description
Bolt Circle
Description Dust Shield LH Electric 8K Assy RH Electric 8K Assy LH Hydraulic Duo-Servo 8K Assy RH Hydraulic Duo-Servo 8K Assy
STUDS & WHEEL NUTS Item 16 17 18 19 20 Part # 7700036 7700048 7700034 7700112 7700156 Ref #
6-53 6-109 6-58 7-132 7-232
23
Description 9/16"-18 60 Deg Cone Nut 5/8"-18 90 Deg Cone Nut 5/8"-18 Flange Nut 9/16"-18 x 2.3 Pressed Wheel Stud** 5/8"-18 x 2.75 Pressed Wheel Stud**
WWW.TEXTRAIL.COM
A-43
10 11 12 13 14 15
DXQ 7K
LH Electric Assembly RH Electric Assembly Magnet Kit 7K Oval Magnet for Dexter 12 Electric Brakes Magnet Spring Magnet Retaining Clip Shoe & Lining Kit (Includes Item 14-15) Shoe Hold Down Spring & Cup Shoe Hold Down Pin
A-44
10 11 12 13 14 15
WWW.TEXTRAIL.COM
WWW.TEXTRAIL.COM
A-45
*** Parts are only replaceable through purchase of FSA Electric Brake Repair Kits
WWW.TEXTRAIL.COM
A-46
Qty/Brk
1 1 1 1 1 1 1 1 1 1 1 1 1 2 5 1 1 1 1 1 1 1
Description
LH Pivot Pin & Cam Sub-Assembly RH Pivot Pin & Cam Sub-Assembly LH Actuating Cam RH Actuating Cam Retractor Spring Adjuster Screw Spring Adjuster Screw Assembly Magnet Kit 5.2-6K Oval Magnet for Dexter 12 Electric Brakes Magnet Retaining Clip Magnet Spring LH Actuating Arm RH Actuating Arm Magnet Wire Retaining Clip 3/8"-24 Brake Mounting Nut Washer Assembly Adjuster Plug Wire Grommet 0.437 Dia. Pivot Pin Locknut Washer Plain 0.312 x 0.75 x 0.065 Actuating Lever Anchor Post Locknut Anchor Post & Bushing Assembly
DXQ 5.2K - 6K
Item Part # Ref #
23-112 23-113 16 17 18 6450067 6450222 6450187 71-48 46-77 49-11
Qty/Brk
1 1 1 2 2
Description
LH Electric Assembly RH Electric Assembly Shoe & Lining Kit (Includes Item 20-21) Shoe Hold Down Spring & Cup Shoe Hold Down Pin
6K
Item Part # Ref # 23-328 23-329 16 17 18 6450084 6450222 6450187 71-127 46-77 49-11 Qty/Brk 1 1 1 2 2 Description
LH Electric Assembly RH Electric Assembly Shoe & Lining Kit (Includes Item 20-21) Shoe Hold Down Spring & Cup Shoe Hold Down Pin
WWW.TEXTRAIL.COM
A-47
Part #
6450249 6451004 6450229
Ref #
46-101 5-113 46-102 43-29 54-60 54-62 54-63 54-64 54-65 6-193 46-7 87-1 23-322 23-323 23-324 23-325 71-268 46-77 49-12 23-336 23-337 23-338 23-339 71-269 71-270 46-77 49-12
Qty/ Description Brk 1 Retractor Spring 1 Anchor Post Washer 1 Adjusting Screw Spring 1 Adjuster Assembly 1 / 2 Cylinder Push Rod US (1) DS (2) 1 LH Duo-Servo Wheel Cylinder 1 RH Duo-Servo Wheel Cylinder 1 LH Uni-Servo Wheel Cylinder 1 RH Uni-Servo Wheel Cylinder 5 3/8"-24 Brake Mounting Nut & Washer Assembly 1 Adjuster Slot Plug 2 Sems (screw & washer assembly) 5/16"-18 x 0.62
6K Light Duty
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
LH Duo-Servo Hydraulic Brake Assembly RH Duo-Servo Hydraulic Brake Assembly LH Uni-Servo Hydraulic Brake Assembly RH Uni-Servo Hydraulic Brake Assembly Shoe & Lining Kit Shoe Hold Down Spring & Cup Shoe Hold Down Pin
6K - 7K
LH Duo-Servo Hydraulic Brake Assembly RH Duo-Servo Hydraulic Brake Assembly LH Uni-Servo Hydraulic Brake Assembly RH Uni-Servo Hydraulic Brake Assembly LH Shoe & Lining Kit RH Shoe & Lining Kit Shoe Hold Down Spring & Cup Shoe Hold Down Pin
A-48
WWW.TEXTRAIL.COM
Qty/ Description Brk 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 5 1 1 1 2 1 LH HFB Brake Assembly RH HFB Brake Assembly Shoe Lever Return Spring Retractor Spring 5/16"-18 Lock Nut LH Shoe & Lining Kit RH Shoe & Lining Kit Shoe Hold Down Spring & Cup Secondary Shoe Hold Down Pin - Secondary Shoe Hold Down Pin - Primary Shoe Hold Down Spring - Primary Shoe Hold Down Cup - Primary Adjusting Screw Spring Adjuster Assembly Travel Link Zinc Shoe Lever Screw Washer 0.382 x 1.28 x 0.1196 Zinc Plated Primary Shoe Return Spring 3/8"-24 Brake Mounting Nut & Washer Assembly Cylinder Push Rod LH Uni-Servo Wheel Cylinder RH Uni-Servo Wheel Cylinder Sems (screw & washer assembly) 5/16"-18 x 0.62 Adjuster Slot Plug
Qty/ Brk
1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 5 1 1 1 2 1 1
Description
LH HFBP Brake Assembly RH HFBP Brake Assembly Shoe Lever Return Spring Retractor Spring 5/16"-18 Lock Nut LH Shoe & Lining Kit RH Shoe & Lining Kit Shoe Hold Down Spring & Cup Secondary Shoe Hold Down Pin - Secondary Shoe Hold Down Pin - Primary Shoe Hold Down Spring - Primary Shoe Hold Down Cup - Primary Adjusting Screw Spring Adjuster Assembly Strut for Parking Brake Travel Link Zinc Shoe Lever Retainer Horseshoe Park Lever Washer 3/8" x 0.013 Screw Washer 0.382 x 1.28 x 0.1196 Zinc Plated Primary Shoe Return Spring LH Parking Lever and Pin RH Parking Lever and Pin 3/8"-24 Brake Mounting Nut & Washer Assembly Cylinder Push Rod LH Uni-Servo Wheel Cylinder RH Uni-Servo Wheel Cylinder Sems (screw & washer assembly) 5/16"-18 x 0.62 Adjuster Slot Plug Park Brake Cable
9 10 11 12 13 14 15 16 17 18
6450286
19 20 21
19 20
6451005 6450038
22 23
WWW.TEXTRAIL.COM
A-49
Part #
6450249
Ref #
46-101 5-113 46-102 43-29 46-103 47-109 69-55 5-112 54-60 54-62 54-63 54-64 54-65 47-110-1 47-111-1
Qty/Brk
1 1 1 1 1 1 1 1 1/2 1 1 1 1 1 1 5 2 1 1
Description Retractor Spring Anchor Post Washer Adjusting Screw Spring Adjuster Assembly Parking Strut Spring Parking Strut Retainer Horseshoe Park Lever Washer 3/8" x 0.013 Cylinder Push Rod US (1) DS (2) LH Duo-Servo Wheel Cylinder RH Duo-Servo Wheel Cylinder LH Uni-Servo Wheel Cylinder RH Uni-Servo Wheel Cylinder LH Parking Lever and Pin RH Parking Lever and Pin 3/8"-24 Brake Mounting Nut & Washer Assembly Sems (screw & washer assembly) 5/16"-18 x 0.62 Adjuster Slot Plug Park Brake Cable
13 14 15
6K Light Duty
23-318 23-319 23-320 23-321 16 17 18 6450052 6450222 71-268 46-77 49-12 1 1 1 1 1 1 1
LH Duo-Servo Hydraulic Brake Assembly RH Duo-Servo Hydraulic Brake Assembly LH Uni-Servo Hydraulic Brake Assembly RH Uni-Servo Hydraulic Brake Assembly Shoe & Lining Kit Shoe Hold Down Spring & Cup Shoe Hold Down Pin
6K - 7K
23-332 23-333 6400069 6400070 16 6450071 6450070 17 18 6450222 23-334 23-335 71-269 71-270 46-77 49-12 1 1 1 1 1 1 1 1
LH Duo-Servo Hydraulic Brake Assembly RH Duo-Servo Hydraulic Brake Assembly LH Uni-Servo Hydraulic Brake Assembly RH Uni-Servo Hydraulic Brake Assembly LH Shoe & Lining Kit RH Shoe & Lining Kit Shoe Hold Down Spring & Cup Shoe Hold Down Pin
A-50
WWW.TEXTRAIL.COM
Part #
6450558 6450556 6450560 6450552 6450553 6451000 6451001
Item
16 17 18 19 20 21 22 23 24 25 26 27
Part #
7700073 7800026 7800054 7800027 7800055 8750033 8750005 8750003 7700027 7700016 7700053 6450565 7700109 6450739 7700142
Ref #
10-36 25580 25520 15123 15245 5-23 6-1 19-2 21-1 21-1-1 85-1 LB169 7-122 LB20 7-262 6-201 6-80 6-200 6-98
Stainless Steel Guide Bolt M11 x 1.5 Stainless Steel Sleeve Rubber Bushing for Guide Bolt Adapter Port 90 deg 1/8" NPT to 3/16" FIF Bleed Port / Screw Assy (Contains Next 2 Items) Bleed Screw Port 1/4"-28 Bleed Screw Adapter 1/8" Caliper E-Coat Caliper Silver Cadmium Plated Caliper Stainless Steel 2-1/4" Stainless Steel Piston Piston Rubber Seal Rubber Dust Boot Caliper Mounting Bracket E-Coat Caliper Mounting Bracket SCD Brake Pads (Semi-Metallic) Brake Pads (Ceramic) 655 12" Rotor/Hub Standard Automotive Finish 655 12" Rotor/Hub E-Coat 655 12" Rotor/Hub Silver Cadmium Plated 28
Caliper comes w/ items 1-9 6 6450527 6450528 6450529 7 8 9 10 11 12 6450548 6450550 6450551 6450615 6450616 6450630 6450620 6450603 6450604 6450605
DBC225E DBC225SCAD DBC225SS DBC225PISTONSS DBC225SEAL DBC225BOOT CMB12U CMB12USCAD DBC225SMPAD DBC225CERMPAD ROTORHUB12 ROTORHUB12E ROTORHUB12SCAD
MOUNTING HARDWARE
Not Included in Kits Below
Item
13 14 15
Part #
6450240 6450182 9000250
Ref #
7-112 6-10 33621
Description
3/8"-24 x 0.88" Grade 5 Bolt 3/8-24" Grade 5 Nut 3/8"-24 Lock Washer
Item
Ref #
2HRCM12-K 2HRCM12E-K 2HRCM12ESCAD-K 2HRCM12SCAD-K 2HRCM12SCADSS-K
Description
Axle Kit, STD Rotor, E-Coat Caliper Axle Kit, E-Coat Axle Kit, E-Coat, SCAD Caliper Axle Kit, SCAD Axle Kit, SCAD Rotor, SS Caliper
For Salt Water applications it is recommended the use of Stainless Steel Hardware
Kodiak's offers the ONLY complete ALL STAINLESS STEEL Disc Brake Set in the Industry. Stainless Steel is the best available corrosive resistant material. The Stainless Steel Kits come with a 6 Year Warranty verses the Standard 3 Year Limited Warranty.
6450584
6450586
WWW.TEXTRAIL.COM
A-51
REPLACEMENT PARTS MOUNTING HARDWARE Item Part # Ref # Description Not Included in Kits Below 1 DBCMHGB 6450558 Stainless Steel Guide Bolt M11 x 1.5 Item Part # Ref # Description 2 DBCMHBS 13 7-112 6450556 6450240 Stainless Steel Sleeve 3/8"-24 x 0.88" Grade 5 Bolt 3 DBCMHBSB 14 6-10 6450560 6450182 Rubber Bushing for Guide Bolt 3/8-24" Grade 5 Nut 4 DBCFIFMP90 15 33621 6450552 9000250 Adapter Port 90 deg 1/8" NPT to 3/16" FIF 3/8"-24 Lock Washer Bleed Port / Screw Assy (Contains Next 2 5 DBCNPTADPBBS 6450553 For Salt Water applications it is recommended the use of Stainless Steel Hardware Items) DBCNPTBBS 6451000 Bleed Screw Port 1/4"-28 DBCNPTADP 6451001 Bleed Screw Adapter 1/8" Caliper comes w/ items 1-9 ROTOR ONLY KITS 6 DBC225E 6450527 Caliper E-Coat Includes Items 1 thru 12 DBC225SCAD 6450528 Part # Caliper Silver Cadmium Plated Item Ref # Description DBC225SS 2RCM12-K 6450529 6450576 Caliper Stainless Steel Axle Kit, STD Rotor, E-Coat Caliper 7 2RCM12E-K 6450548 DBC225PISTONSS 2-1/4" Stainless Steel Piston 6450577 Axle Kit, E-Coat 8 DBC225SEAL 2RCM12ESCAD-K 6450550 6450578 Piston Rubber Seal Axle Kit, E-Coat, SCAD Caliper 9 DBC225BOOT 2RCM12SCAD-K 6450551 6450579 Rubber Dust Boot Axle Kit, SCAD 10 CMB12U 2RCM12SCADSS-K 6450615 6450580 Caliper Mounting Bracket E-Coat Axle Kit, SCAD Rotor, SS Caliper CMB12USCAD 2RCM12SS-K 6450616 6450581 Caliper Mounting Bracket SCD Axle Kit, Stainless Steel CMB12USS 6450617 Caliper Mounting Bracket SS 11 DBC225SMPAD 6450630 Brake Pads (Semi-Metallic) DBC225CERMPAD Brake Pads (Ceramic) 6450620 12 ROTOR12 6450598 655 12" Rotor Standard Automotive Finish ROTOR12E 6450599 655 12" Rotor E-Coat ROTOR12SCAD 6450600 655 12" Rotor Silver Cadmium Plated ROTOR12SS 6450601 655 12" Rotor Stainless Steel Kodiak's offers the ONLY complete ALL STAINLESS STEEL Disc Brake Set in the Industry. Stainless Steel is the best available corrosive resistant material. The Stainless Steel Kits come with a 6 Year Warranty verses the Standard 3 Year Limited Warranty.
6450577
6450579
6450581
WWW.TEXTRAIL.COM
A-52
6450680
6450690
6450682
REPLACEMENT PARTS Description DBCMHGB Stainless Steel Guide Bolt M11 x 1.5 DBCMHBS Stainless Steel Sleeve DBCMHBSB Rubber Bushing for Guide Bolt DBCFIFMP90 Adapter Port 90 deg 1/8" NPT to 3/16" FIF DBCNPTADPBBS Bleed Port / Screw Assy (Contains Next 2 Items) DBCNPTBBS Bleed Screw Port 1/4"-28
DBCNPTADP
Mounting Hardware Ref # Description Item 16-17 & 20-27 Not Included in Kits Below 10-36 Double Lip Seal 3.376" OD x 2.250" ID 25580 Inner Bearing Cone 25520 Inner Bearing Cup 14125A Outer Bearing Cup 14276 Outer Bearing Cone
5-23 6-1
Spindle D-Washer
7 8 9 10
Caliper comes w/ items 1-9 DBC250E Caliper E-Coat DBC250SCAD Caliper Silver Cadmium Plated DBC250SS Caliper Stainless Steel DBC250PISTONSCAD 2-1/2" Silver Cadmium Plated Piston DBC250PISTONSS 2-1/2" Stainless Steel Piston DBC250SEAL Piston Rubber Seal DBC250BOOT Rubber Dust Boot CMB1337 Caliper Mounting Bracket E-Coat CMB1337SCAD Caliper Mounting Bracket Silver Cadmium Plated
CMB1337SS DBC250SMPAD DBC250CERMPAD ROTORHUB13378 ROTORHUB13378E ROTORHUB13378SCAD ROTORHUB13389 ROTORHUB13389E ROTORHUB13389SCAD ROTORHUB133810 ROTORHUB133810E ROTORHUB133810SCAD
Caliper Mounting Bracket Stainless Steel Brake Pads (Semi-Metallic) Brake Pads (Ceramic) 1/2" 856 13" Rotor/Hub Standard Automotive Finish 1/2" 865 13" Rotor/Hub E-Coat 1/2" 865 13" Rotor/Hub Silver Cadmium Plated 9/16" 856 13" Rotor/Hub Standard Automotive Finish 9/16" 865 13" Rotor/Hub E-Coat 9/16" 865 13" Rotor/Hub Silver Cadmium Plated 5/8" 856 13" Rotor/Hub Standard Automotive Finish 5/8" 865 13" Rotor/Hub E-Coat 5/8" 865 13" Rotor/Hub Silver Cadmium Plated
28
Spindle Nut Cotter Pin 21-39 Grease Cap 21-43-1 Grease Cap EZ Lube 85-1 Rubber Plug EZ Lube 7-122 -20 x 1.84" Long Pressed Wheel Stud LB20 -20 x 2" Long Pressed Wheel Stud 7-262 -20 x 2.50" Long Pressed Wheel Stud LB25 9/16"-18 x 2.5" Pressed Wheel Stud 7-223 9/16"-18 x 2" Pressed Wheel Stud -20 60 Deg Cone Nut Standard Torq-N6-201 GoTM 6-80 -20 60 Deg Cone Nut -20 60 Deg Cone Nut Capped Torq-N6-200 GoTM 6-98 -20 60 Deg Cone Nut Stainless Capped 6-53 9/16"-18 60 Deg Cone Nut 1/2" Rotor Only Kits
19-2
Description Axle Kit, STD Rotor, E-Coat Caliper Axle Kit, E-Coat Axle Kit, SCAD Axle Kit, SCAD Rotor, SS Caliper
Item 13 14 15
Mounting Hardware Not Included in Kits Below Ref # Description 7-112 6-10 3/8"-24 x 0.88" Grade 5 Bolt 3/8-24" Grade 5 Nut
Item
9/16" Rotor Only Kits Includes Items 1 thru 12 Ref # Description 2HRCM13379-K Axle Kit, STD Rotor, E-Coat Caliper 2HRCM13379E-K Axle Kit, E-Coat
2HRCM13379SCADK 2HRCM13379SCADSS-K
9000250 33621 3/8"-24 Lock Washer For Salt Water applications it is recommended the use of Stainless Steel Hardware Item Part # 6450688 6450689 6450690
5/8" Rotor Only Kits Includes Items 1 thru 12 Ref # Description 2HRCM133710-K Axle Kit, STD Rotor, E-Coat Caliper 2HRCM133710E-K Axle Kit, E-Coat
2HRCM133710SCAD-K
Kodiak's offers the ONLY complete ALL STAINLESS STEEL Disc Brake Set in the Industry. Stainless Steel is the best available corrosive resistant material. The Stainless Steel Kits come with a 6 Year Warranty verses the Standard 3 Year Limited Warranty.
WWW.TEXTRAIL.COM
A-53
Part #
6450558 6450556 6450560 6450552 6450553 6451000 6451001
REPLACEMENT PARTS Description DBCMHGB Stainless Steel Guide Bolt M11 x 1.5 DBCMHBS Stainless Steel Sleeve DBCMHBSB Rubber Bushing for Guide Bolt DBCFIFMP90 Adapter Port 90 deg 1/8" NPT to 3/16" FIF DBCNPTADPBBS Bleed Port / Screw Assy (Contains Next 2 Items) DBCNPTBBS Bleed Screw Port 1/4"-28 DBCNPTADP Bleed Screw Adapter 1/8"
Caliper comes w/ items 1-9
DBC250E DBC250SCAD DBC250SS DBC250PISTONSCAD DBC250PISTONSS DBC250SEAL DBC250BOOT CMB13372D DBC250SMPAD DBC250CERMPAD ROTOR13378 ROTOR13378E
Mounting Hardware Not Included in Kits Below Item Part # Ref # Description 7-271 13 6450307 7/16"-20 x 1-3/16" Grade 5 Bolt 5-8 14 7030116 7/16" Lock Washer 6-17 15 6450181 7/16"-20 Nut
For Salt Water applications it is recommended the use of Stainless Steel Hardware
Caliper E-Coat Caliper Silver Cadmium Plated Caliper Stainless Steel 2-1/2" Silver Cadmium Plated Piston 2-1/2" Stainless Steel Piston Piston Rubber Seal Rubber Dust Boot Caliper Mounting Bracket E-Coat Brake Pads (Semi-Metallic) Brake Pads (Ceramic) 1/2" 865 13" Rotor Standard Automotive Finish
Description 1/2" Axle Kit, STD Rotor, E-Coat Caliper 1/2" Axle Kit, E-Coat 1/2" Axle Kit, SCAD 1/2" Axle Kit, SCAD Rotor, SS Caliper 1/2" Axle Kit, SS 9/16" Axle Kit, STD Rotor, E-Coat Caliper 9/16" Axle Kit, E-Coat 9/16" Axle Kit, SCAD 9/16" Axle Kit, SCAD Rotor, SS Caliper 9/16" Axle Kit, SS
6450818 6450819
8 9 10 11
12
2RCM13379SS-K 6450664 1/2" 865 13" Rotor E-Coat 1/2" 865 13" Rotor Silver Cadmium Plated ROTOR13378SS 6450698 1/2" 865 13" Rotor Stainless Steel 9/16" 865 13" Rotor Standard Automotive ROTOR13389 6450774 Finish ROTOR13378E 6450775 9/16" 865 13" Rotor E-Coat 6450776 ROTOR13378SCAD 9/16" 865 13" Rotor Silver Cadmium Plated ROTOR13378SS 6450777 9/16" 865 13" Rotor Stainless Steel Kodiak's offers the ONLY complete ALL STAINLESS STEEL Disc Brake Set in the Industry Stainless Steel is the best available corrosive resistant material The Stainless Steel Kits come with a 6 Year Warranty verses the Standard 3 Year Limited Warranty ROTOR13378SCAD
6450661
6450662
6450663
6450664
WWW.TEXTRAIL.COM
A-54
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
6450683
6450691
8 on 65 Bolt Pattern
Ref #
Part #
6450558 6450556 6450560 6450552 6450553 6451000 6451001
REPLACEMENT PARTS Description DBCMHGB Stainless Steel Guide Bolt M11 x 1.5 DBCMHBS Stainless Steel Sleeve DBCMHBSB Rubber Bushing for Guide Bolt DBCFIFMP90 Adapter Port 90 deg 1/8" NPT to 3/16" FIF DBCNPTADPBBS Bleed Port / Screw Assy (Contains Next 2 Items) DBCNPTBBS Bleed Screw Port 1/4"-28 DBCNPTADP Bleed Screw Adapter 1/8" Caliper comes w/ items 1-9 DBC250E Caliper E-Coat DBC250SCAD Caliper Silver Cadmium Plated DBC250SS Caliper Stainless Steel
DBC250PISTONSCAD DBC250PISTONSS DBC250SEAL DBC250BOOT CMB13372D DBC250SMPAD DBC250CERMPAD ROTORHUB13389 ROTORHUB13389E ROTORHUB13389SCAD ROTORHUB133810 ROTORHUB133810E ROTORHUB133810SCAD
Mounting Hardware Part # Ref # Description Item 16-17 & 20-27 Not Included in Kits Below 10-36 7700073 Double Lip Seal 3.376" OD x 2.250" ID 10-63 7700088 Unitized Seal 3.376" OD x 2.250" ID 25580 7800026 Inner Bearing Cone 25520 7800054 Inner Bearing Cup 02475 7800028 Outer Bearing Cup 02420 7800057 Outer Bearing Cone 5-57 8750034 Spindle D-Washer 6-1 8750005 Spindle Nut 19-2 8750003 Cotter Pin 21-39 7700186 Grease Cap 2.72"
7700018 7700019
21-43-1 21-43-2 85-1
2-1/2" Silver Cadmium Plated Piston 2-1/2" Stainless Steel Piston Piston Rubber Seal Rubber Dust Boot Caliper Mounting Bracket E-Coat Brake Pads (Semi-Metallic) Brake Pads (Ceramic) 9/16" 856 13" Rotor/Hub Standard Automotive Finish 9/16" 865 13" Rotor/Hub E-Coat 9/16" 865 13" Rotor/Hub Silver Cadmium Plated 5/8" 856 13" Rotor/Hub Standard Automotive Finish 5/8" 865 13" Rotor/Hub E-Coat 5/8" 865 13" Rotor/Hub Silver Cadmium Plated
Grease Cap EZ Lube 2.72" Grease Cap EZ Lube Chrome 2.72" Rubber Plug EZ Lube Oil Cap Kit (Includes Items 27 - 29) O-ring (865) Oil Cap (865) Oil Cap Plug Oil Fill Hole Plug 9/16-18 x 2.5" Pressed Wheel Stud 9/16"-18 x 2.01" Pressed Wheel Stud 5/8"-18 x 3.165" Pressed Wheel Stud 5/8"-18 x 2.50" Pressed Wheel Stud 9/16"-18 60 Deg Cone Nut Zinc Plated 5/8"-18 60 Deg Cone Nut Zinc Plated 5/8"-18 Flange Nut
7 8 9 10 11 12
6450819 6450820 6450821 6450710 6450811 6450810 6450783 6450784 6450785 6450788 6450789 6450790
26 30 27 28 29 31
7700053 7700029-01 7700055 7700029 7700052 7700051 6450835 7700123 6450741 7700145
10-45 21-35 46-32 46-52 LB25 7-223 LB3165 7-224 6-53 6-109 6-58
32
7700036 7700048
Item
13 14
Part #
6450307 7030116
Rotor Only Kits Includes Items 1 thru 12 Ref # 15 6450181 Item Part # Description 9/16" Axle Kit, STD Rotor, E-Coat 2HRCM133729-K For Salt Water applications it is recommended the use of Stainless Steel Hardware 6450683 Caliper 2HRCM133729E-K 9/16" Axle Kit, E-Coat Caliper 6450684 5/8" Axle Kit, STD Rotor, E-Coat 2HRCM1337210-K 6450691 Caliper Kodiak's offers the ONLY complete ALL STAINLESS STEEL Disc Brake Set in the Industry. Stainless Steel is the best available corrosive resistant material. The Stainless Steel Kits come with a 6 Year Warranty verses the Standard 3 Year Limited Warranty.
Not Included in Kits Below Ref # Description 7-271 7/16"-20 x 1-3/16" Grade 5 Bolt 5-8 7/16" Lock Washer 6-17 7/16"-20 Nut
7700034
WWW.TEXTRAIL.COM
A-56
REPLACEMENT PARTS
Part #
6450558 6450556 6450560 6450552 6450553 6451000 6451001
Mounting Hardware
Not Included in Kits Below Item
13 14 15
Ref #
DBCMHGB DBCMHBS DBCMHBSB DBCFIFMP90 DBCNPTADPBBS DBCNPTBBS DBCNPTADP
Stainless Steel Guide Bolt M11 x 1.5 Stainless Steel Sleeve Rubber Bushing for Guide Bolt Adapter Port 90 deg 1/8" NPT to 3/16" FIF Bleed Port / Screw Assy (Contains Next 2 Items) Bleed Screw Port 1/4"-28 Bleed Screw Adapter 1/8"
Caliper comes w/ items 1-9
Part #
6450307 7030116 6450181
Ref #
7-271 5-8 6-17
Description
For Salt Water applications it is recommended the use of Stainless Steel Hardware
DBC250E DBC250SCAD DBC250SS DBC250PISTONSCAD DBC250PISTONSS DBC250SEAL DBC250BOOT CMB13372D DBC250SMPAD DBC250CERMPAD ROTOR13389 ROTOR13389E ROTOR13389SCAD ROTOR13389SS ROTOR133810 ROTOR133810E ROTOR133810SCAD ROTOR133810SS
Caliper E-Coat Caliper Silver Cadmium Plated Caliper Stainless Steel 2-1/2" Silver Cadmium Plated Piston 2-1/2" Stainless Steel Piston Piston Rubber Seal Rubber Dust Boot Caliper Mounting Bracket E-Coat Brake Pads (Semi-Metallic) Brake Pads (Ceramic) 9/16" 865 13" Rotor Standard Automotive Finish 9/16" 865 13" Rotor E-Coat 9/16" 865 13" Rotor Silver Cadmium Plated 9/16" 865 13" Rotor Stainless Steel 5/8" 865 13" Rotor Standard Automotive Finish 5/8" 865 13" Rotor E-Coat 5/8" 865 13" Rotor Silver Cadmium Plated 5/8" 865 13" Rotor Stainless Steel
Item
Part #
6450665 6450666 6450671 6450672
6450818 6450819
8 9 10 11
Rotor Only Kits Includes Items 1 thru 12 Ref # Description 9/16" Axle Kit, STD Rotor, E-Coat 2RCM133729-K Caliper 2RCM133729E-K 9/16" Axle Kit, E-Coat 2RCM1337210-K 5/8" Axle Kit, STD Rotor, E-Coat Caliper 2RCM1337210E-K 5/8" Axle Kit, E-Coat
12
Kodiak's offers the ONLY complete ALL STAINLESS STEEL Disc Brake Set in the Industry Stainless Steel is the best available corrosive resistant material The Stainless Steel Kits come with a 6 Year Warranty verses the Standard 3 Year Limited Warranty
6450665
6450671
WWW.TEXTRAIL.COM
A-57
12 1/4" x 3 3/8" 8K Electric Manual Adjust Brake* Item Part # Ref # Qty/Brk Description 23-432 1 LH Electric Assembly 23-433 1 RH Electric Assembly 1 6450173-01 71-375 1 Magnet Kit 42-127 1 8K Oval Magnet for Dexter 12.25 Electric Brakes 2 6450194 27-50 1 Magnet Retaining Clip 3 6450232 46-117 1 Magnet Spring 4 6450177 6-92-1 1 7/16"-20 Anchor Post Flange Nut 5 5-142 1 Washer Plain 1/2" Type B 6 6450211 71-455-1 1 LH Lever Arm Retainer 6450212 71-455-2 1 RH Lever Arm Retainer 7 47-123-18 1 LH Actuating Arm Assembly 47-123-17 1 RH Actuating Arm Assembly 8 6450102 27-39 3 Magnet Wire Retaining Clip 9 6450237 46-119 1 Return Spring 10 6450226 46-18 1 Adjuster Spring 11 6450101 46-133 1 Adjuster Clip - Barrel End 12 6450009 46-17 1 Adjuster Assembly 13 6450100 46-132 1 Adjuster Clip - Thread End 14 6450059 71-499 1 LH Shoe & Lining Kit 6450060 71-498 1 RH Shoe & Lining Kit 15 6450097 46-136 2 Centering Spring 16 6450019 7-97 4 1/2"-20 x 1.75" Brake Mounting Hex Head Bolt Gr-5 17 6450113 36-115-20 1 Dust Shield 18 6450038 46-7 2 Adjuster Plug 19 5-58 4 1/2" X 0.125 Brake Mounting Lock Washer 20 6-129 4 1/2"-20 Brake Mounting Plain Hex Nut UNF 21 6450001 46-16 1 Wire Grommet 0.437 Dia. * Cast plate. For replacement parts of Stamped Backing Plate, call your sales representative.
WWW.TEXTRAIL.COM
A-58
12 1/4" x 3 3/8" 8K Forward Self-Adjusting Electric Brake* Item Part # Ref # Qty/Brk Description 6400039 23-434 1 LH FSA Electric Assembly 6400040 23-435 1 RH FSA Electric Assembly 1 6450275 46-137 1 Adjuster Spring 2 6450146 71-464 1 LH Adjuster Lever 6450150 71-463 1 RH Adjuster Lever 3 6450088 71-462 1 Adjuster Cable 10" 4 6450173-01 71-375 1 Magnet Kit 42-127 1 8K Oval Magnet for Dexter 12.25 Electric Brakes 5 6450232 46-117 1 Magnet Spring 6 6450194 27-50 1 Magnet Retaining Clip 7 6450177 6-92-1 1 7/16"-20 Anchor Post Flange Nut 8 6450211 71-455-1 1 LH Lever Arm Retainer 6450212 71-455-2 1 RH Lever Arm Retainer 9 6450102 27-39 3 Magnet Wire Retaining Clip 10 6450271 47-123-38 1 LH Actuating Arm 6450270 47-123-37 1 RH Actuating Arm 11 6450237 46-119 1 Return Spring 12 6450101 46-133 1 Adjuster Clip - Barrel End 13 6450011 48-19 1 LH Adjuster Assembly (Silver) 6450010 48-20 1 RH Adjuster Assembly (Gold) 14 6450100 46-132 1 Adjuster Clip - Thread End 15 6450059 71-499 1 LH Shoe & Lining Kit 6450060 71-498 1 RH Shoe & Lining Kit 16 6450097 46-136 2 Centering Spring 17 6450019 7-97 4 1/2"-20 x 1.75" Brake Mounting Hex Head Bolt Gr-5 18 6450113 36-115-20 1 Dust Shield 19 6450038 46-7 2 Adjuster Plug 20 5-58 4 1/2" X 0.125 Brake Mounting Lock Washer 21 6-129 4 1/2"-20 Brake Mounting Plain Hex Nut UNF 22 6450001 46-16 1 Wire Grommet 0.437 Dia. * Cast plate. For replacement parts of Stamped Backing Plate, call your sales representative.
WWW.TEXTRAIL.COM
A-59
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
6450264 6450260 6450219 6450081 6450080 6450247 6450226 6450100 6450009 6450101 6050055 6450019
6450038
WWW.TEXTRAIL.COM
12 1/4" x 3 3/8" 8K Hydraulic Uni-Servo Manual Adjust Brake with Park Feature
Item Part # Ref # 23-252 23-253 7-96 5-143 5-65 46-91 47-89 47-90 39-55 39-56 33-83 46-87 71-165 71-166 6-86 5-107 46-18 46-132 48-17 46-133 7-97 7-113 36-64-8 36-64-9 69-40 71-80 54-33 36-115-24 5-58 6-129 46-7 71-512 Qty/Brk 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 1 1 1 4 2 1 1 1 1 1 1 4 4 2 1 Description LH Uni-Servo Hydraulic Assembly RH Uni-Servo Hydraulic Assembly Hold Down Lever Bolt Star Washer Hold Down Lever Washer Hold Down Lever Spring LH Parking Lever RH Parking Lever LH Parking Cam RH Parking Cam Spacer Spring Retractor LH Shoe & Lining Kit RH Shoe & Lining Kit Shoe Hold Locknut 3/8-16 Shoe Hold Down Washer Spring Adjuster Adjuster Clip - Thread End Adjuster Assembly Adjuster Clip - Barrel End 1/2"-20 x 1.75" Hex Head Break Mounting Bolt Shoe Hold Down Screw LH Spider Assembly (Includes Items 19-21) RH Spider Assembly (Includes Items 19-21) Retainer Snap Ring Wheel Cylinder Kit (1.00 Bore) containing: Cylinder Push Rod Dust Shield 1/2" Lock washer 1/2"-20 Brake Mounting Nut Adjuster Slot Plug Parking Brake Cable
A-61
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
6450219 6450081 6450080 6450247 6450226 6450100 6450009 6450101 6450019 6450203
6450027 6450259
6450038
WWW.TEXTRAIL.COM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
6400041 6460042 6450013 6450014 6450146 6450150 6450088 6450264 6450280 6450291 6450260 6450219 6450100 6450011 6450010 6450101 6450081 6450080 6450247 6450019
17 18 19 20 21 22 23
WWW.TEXTRAIL.COM
Part #
6450558 6450556 6450560 6450552 6450553 6451000 6451001
Ref #
DBCMHGB DBCMHBS DBCMHBSB DBCFIFMP90 DBCNPTADPBBS DBCNPTBBS DBCNPTADP
Part #
7700073 7700088 7800026 7800054 7800028 7800057 8750034 8750005 8750003 7700186 7700018 7700019 7700053 7700029-01 7700055 7700029 7700052 7700051 6450835 7700123 6450741 7700145
Ref #
10-36 10-63 25580 25520 02475 02420 5-57 6-1 19-2 21-39 21-43-1 21-43-2 85-1
6 7 8 9
Caliper E-Coat 2-1/2" Silver Cadmium Plated Piston 2-1/2" Stainless Steel Piston Piston Rubber Seal Rubber Dust Boot
10
6450806 6450807
Dexter Axle Caliper Mounting Brackets CMB1338DI Caliper Mounting Bracket E-Coat CMB1338DISCAD Caliper Mounting Bracket Silver Cadmium Plated Other Axle Caliper Mounting Brackets CMB1338A Caliper Mounting Bracket E-Coat CMB1338ASCAD Caliper Mounting Bracket Silver Cadmium Plated CMB1338ASS Caliper Mounting Bracket Stainless Steel
DBC250SMPAD DBC250CERMPAD ROTORHUB13389 ROTORHUB13389E ROTORHUB13389SCAD ROTORHUB133810 ROTORHUB133810E ROTORHUB133810SCAD
30 27 28 29
10-45 21-35 46-32 46-52 LB25 7-223 LB3165 7-224 6-53 6-109 6-58
10
31
11 12
Brake Pads (Semi-Metallic) Brake Pads (Ceramic) 9/16" 856 13" Rotor/Hub Standard Automotive Finish 9/16" 856 13" Rotor/Hub E-Coat 9/16" 856 13" Rotor/Hub Silver Cadmium Plated 5/8" 856 13" Rotor/Hub Standard Automotive Finish 5/8" 856 13" Rotor/Hub E-Coat 5/8" 856 13" Rotor/Hub Silver Cadmium Plated
Not Included in Kits Below
32
Double Lip Seal 3.376" OD x 2.250" ID Unitized Seal 3.376" OD x 2.250" ID Inner Bearing Cone Inner Bearing Cup Outer Bearing Cup Outer Bearing Cone Spindle D-Washer Spindle Nut Cotter Pin Grease Cap 2.72" Grease Cap EZ Lube 2.72" Grease Cap EZ Lube Chrome 2.72" Rubber Plug EZ Lube Oil Cap Kit (Includes Items 27 - 29) O-ring (865) Oil Cap (865) Oil Cap Plug Oil Fill Hole Plug 9/16-18 x 2.5" Pressed Wheel Stud 9/16"-18 x 2.01" Pressed Wheel Stud 5/8"-18 x 3.165" Pressed Wheel Stud 5/8"-18 x 2.50" Pressed Wheel Stud 9/16"-18 60 Deg Cone Nut Zinc Plated 5/8"-18 60 Deg Cone Nut Zinc Plated 5/8"-18 Flange Nut
Item
Part #
6450758 6450759 6450760 6450761 6450763 6450771 6450765 6450766
Ref #
2HRCM1338D9-K 2HRCM1338D9E-K 2HRCM1338D9SCAD-K 2HRCM1338D9SCADSS-K 2HRCM1338D10-K 2HRCM1338D10E-K 2HRCM1338D10SCAD-K 2HRCM1338D10SCADSS-K
Description
Item 13 14 15
Description 1/2"-20 x 1-3/4" Grade 5 Bolt 12LWP 9000251 1/2" Lock Washer 9000137 6-46 1/2"-20 Nut For Salt Water applications it is recommended the use of Stainless Steel Hardware
Part #
Ref # 7-97
6450019
Kodiaks offers the ONLY complete ALL STAINLESS STEEL Disc Brake Set in the Industry. Stainless Steel is the best available corrosive resistant material. The Stainless Steel Kits come with a 6 Year Warranty verses the Standard 3 Year Limited Warranty.
Item
9/16" Axle Kit, STD Rotor, E-Coat Caliper 9/16" Axle Kit, E-Coat 9/16" Axle Kit, SCAD 9/16" Axle Kit, SCAD Rotor, SS Caliper 5/8" Axle Kit, STD Rotor, E-Coat Caliper 5/8" Axle Kit, E-Coat 5/8" Axle Kit, SCAD 5/8" Axle Kit, SCAD Rotor, SS Caliper
Part #
6450758-02 6450759-02 6450760-02 6450761-02 6450763-02 6450771-02 6450765-02 6450766-02
Ref #
2HRCM1338A9-K 2HRCM1338A9E-K 2HRCM1338A9SCAD-K 2HRCM1338A9SCADSS-K 2HRCM1338A10-K 2HRCM1338A10E-K 2HRCM1338A10SCAD-K 2HRCM1338A10SCADSS-K
6450663
6450671
6450765
6450766
Description 9/16" Axle Kit, STD Rotor, E-Coat Caliper 9/16" Axle Kit, E-Coat 9/16" Axle Kit, SCAD 9/16" Axle Kit, SCAD Rotor, SS Caliper 5/8" Axle Kit, STD Rotor, E-Coat Caliper 5/8" Axle Kit, E-Coat 5/8" Axle Kit, SCAD 5/8" Axle Kit, SCAD Rotor, SS Caliper
WWW.TEXTRAIL.COM
A-63
Part #
6450558 6450556 6450560 6450552 6450553 6451000 6451001
REPLACEMENT PARTS Description DBCMHGB Stainless Steel Guide Bolt M11 x 1.5 DBCMHBS Stainless Steel Sleeve DBCMHBSB Rubber Bushing for Guide Bolt DBCFIFMP90 Adapter Port 90 deg 1/8" NPT to 3/16" FIF DBCNPTADPBBS Bleed Port / Screw Assy (Contains Next 2 Items) DBCNPTBBS Bleed Screw Port 1/4"-28 DBCNPTADP Bleed Screw Adapter 1/8"
Caliper comes w/ items 1-9
DBC250E DBC250SCAD DBC250SS DBC250PISTONSCAD DBC250PISTONSS DBC250SEAL DBC250BOOT
Mounting Hardware
Not Included in Kits Below
Item
13
Part #
6450019
Ref #
7-97
Description
1/2"-20 x 1-3/4" Grade 5 Bolt 12LWP 14 9000251 1/2" Lock Washer 6-46 15 9000137 1/2"-20 Nut For Salt Water applications it is recommended the use of Stainless Steel Hardware
7 8 9
Caliper E-Coat Caliper Silver Cadmium Plated Caliper Stainless Steel 2-1/2" Silver Cadmium Plated Piston 2-1/2" Stainless Steel Piston Piston Rubber Seal Rubber Dust Boot
Item
Part #
6450743 6450744 6450745 6450747 6450748 6450750 6450751 6450752 6450753 6450755
Ref #
2RCM1338D9-K 2RCM1338D9E-K 2RCM1338D9SCAD-K 2RCM1338D9SCADSS-K 2RCM1338D9SS-K 2RCM1338D10-K 2RCM1338D10E-K 2RCM1338D10SCAD-K 2RCM1338D10SCADSS-K 2RCM1338D10SS-K
10
Dexter Axle Caliper Mounting Brackets CMB1338D Caliper Mounting Bracket E-Coat
CMB1338DSCAD CMB1338DSS
Description 9/16" Axle Kit, STD Rotor, E-Coat Caliper 9/16" Axle Kit, E-Coat 9/16" Axle Kit, SCAD 9/16" Axle Kit, SCAD Rotor, SS Caliper 9/16" Axle Kit, Stainless Steel 5/8" Axle Kit, STD Rotor, E-Coat Caliper 5/8" Axle Kit, E-Coat 5/8" Axle Kit, SCAD 5/8" Axle Kit, SCAD Rotor, SS Caliper
11 12
6450811 6450810 6450774 6450775 6450776 6450777 6450778 6450779 6450780 6450781
Caliper Mounting Bracket Stainless Steel Other Axle Caliper Mounting Brackets CMB1338A Caliper Mounting Bracket E-Coat CMB1338ASCAD Caliper Mounting Bracket Silver Cadmium Plated CMB1338ASS Caliper Mounting Bracket Stainless Steel DBC250SMPAD Brake Pads (Semi-Metallic) DBC250CERMPAD Brake Pads (Ceramic) ROTOR13389 9/16" 865 13" Rotor Standard Automotive Finish ROTOR13389E 9/16" 865 13" Rotor E-Coat
ROTOR13389SCAD ROTOR13389SS ROTOR133810 ROTOR133810E ROTOR133810SCAD ROTOR133810SS
5/8" Axle Kit, Stainless Steel Other Axle Rotor Only Kits
Includes Items 1 thru 12
Item
Part #
6450743-02 6450744-02 6450745-02 6450747-02 6450748-02 6450750-02 6450751-02 6450752-02 6450753-02 6450755-02
Ref #
2RCM1338A9-K 2RCM1338A9E-K 2RCM1338A9SCAD-K 2RCM1338A9SCADSS-K 2RCM1338A9SS-K 2RCM1338A10-K 2RCM1338A10E-K 2RCM1338A10SCAD-K 2RCM1338A10SCADSS-K 2RCM1338A10SS-K
Description
9/16" Axle Kit, STD Rotor, E-Coat Caliper 9/16" Axle Kit, E-Coat 9/16" Axle Kit, SCAD 9/16" Axle Kit, SCAD Rotor, SS Caliper 9/16" Axle Kit, Stainless Steel 5/8" Axle Kit, STD Rotor, E-Coat Caliper 5/8" Axle Kit, E-Coat 5/8" Axle Kit, SCAD 5/8" Axle Kit, SCAD Rotor, SS Caliper 5/8" Axle Kit, Stainless Steel
9/16" 865 13" Rotor Stainless Steel 5/8" 865 13" Rotor Standard Automotive Finish 5/8" 865 13" Rotor E-Coat 5/8" 865 13" Rotor Silver Cadmium Plated 5/8" 865 13" Rotor Stainless Steel
Kodiak's offers the ONLY complete ALL STAINLESS STEEL Disc Brake Set in the Industry. Stainless Steel is the best available corrosive resistant material. The Stainless Steel Kits come with a 6 Year Warranty verses the Standard 3 Year Limited Warranty.
6450750
6450751
6450752
6450755
WWW.TEXTRAIL.COM
A-64
Part #
1 2 3 4 5 6 7 8 9 10 11 12 13
9000144
Ref # 3-272 3-273 34-279 6-38 12-60-2 7-259 5-58 11-89-1 5-143 6-122-1 6-116 3-261 7-177 5-111 6-126 71-632-1 71-632-2 71-632-3 71-632-4
Qty/Brk 1 1 2 16 4 4 6 8 2 2 2 2 6 6 6
Description LH Suspension Assembly (Includes RH Suspension Assembly (Includes Air Spring 5/8"-11 Hex Locknut GRB Zinc Tie Plate Dichromate Plated 1/2"-13 x 1" Long Hex Bolt UNC 1/2" Lock washer 0.125" 5/8"-11 x 7.25" Long U-Bolt for 3.50" Axle Tube 3/4" Lock washer 3/4"-16 Hex Jam Nut RH GR2 1/2"-13 Hex Nut GR2 Side Mount Mounting Bracket 5/8"-18 x 1.5" Long Mounting Hex Bolt GR5 5/8" Plain Washer 0.179" 5/8"-18 Hex Lock Nut Air Control Kit - Tandem Plumbing with Ride Height Control Valve Air Control Kit - Air Generation (including compressor & tank) Air Control Kit - Manual Dump Valve Kit Air Control Kit - Tri-Axle Conversion Plumbing Kit
A-65
WWW.TEXTRAIL.COM
Description
Slipper 2" x 30" 6 Leaf Slipper 2" x 30" w/ 5/8" Rubber / Steel Bushing 6 Leaf Slipper 2" x 29-1/2" Slipper 2-1/2" x 30-1/2" w/ 7/8" Brass Bushing 5 Leaf Slipper 2-1/2" x 30-1/2" w/ 3/4" Rubber Bushing 5 Leaf Slipper 2-1/2" x 30-1/2" w/ 3/4" Bronze Bushing 5 Leaf Slipper 2-1/2" x 32-1/2" w/ 3/4" Rubber Bushing 5 Leaf Slipper 3" x 30-1/2" 5 Leaf Slipper 3" x 30-1/2" 6 Leaf Slipper 3" x 30-1/2" 7 Leaf
Capacity
4,500 lb. 4,500 lb. 5,300 lb. 5,000 lb. 5,000 lb. 5,000 lb. 5,000 lb. 5,000 lb. 6,000 lb. 7,500 lb.
Part #
9150001 9150059 9150026 n/a n/a n/a n/a n/a n/a n/a
Ref#
72-10 72-10-2 E8536 n/a n/a n/a n/a n/a n/a n/a
Part #
n/a n/a n/a 9150046 9150033 9150027 9150029 9150028 9150030 9150032
Ref#
n/a n/a n/a 72-77 72-80 72-21 93161A 72-43-1 72-44-1 72-45-1
Hanger Kits
9,000 lb.
2" Springs
Description
Part #
Ref#
Part #
Ref#
Part #
n/a n/a n/a n/a 9100012 9100006 9100055 9100005
Ref#
n/a n/a n/a n/a HAP-103-00 HAP-203-01 HAP-203-02 HAP-203-03
n/a n/a 9100065 HAP-157-00 Double Eye Single Axle 7/8" Eye* n/a n/a 9100070 HAP-157-01 Double Eye Single Axle 7/8" Eye 38" Spacing** n/a n/a 9100069 HAP-257-02 Double Eye Single Axle 7/8" Eye 42-1/4" Spacing** n/a n/a 9100066 HAP-257-03 Double Eye Single Axle 7/8" Eye 48-1/2" Spacing** 9100011 HAP-105-00 9100072 HAP-158-00 Slipper Single Axle* 9100008 HAP-205-01 9100089 HAP-258-01 Slipper Tandem Axle 38" Spacing** 9100009 HAP-205-02 9100090 HAP-258-02 Slipper Tandem Axle 42-1/4" Spacing** 9100010 HAP-205-03 9100091 HAP-258-03 Slipper Tandem Axle 48-1/2" Spacing** * Complete single axle hanger kit. ** Single axle hanger kit is required with tandem axle kit to create a complete tandem axle hanger kit.
Description
5/8" Diameter 5" Round 8-15/16" Long
Ref#
APUBR5
Part #
865 6151490 865 6151491 865 6151492 6151493
WWW.TEXTRAIL.COM
A-66
Description
Slipper 2-1/2" x 30-1/2" w/ 7/8" Brass Bushing 5 Leaf Slipper 2-1/2" x 30-1/2" w/ 3/4" Rubber Bushing 5 Leaf Slipper 2-1/2" x 32-1/2" w/ 3/4" Rubber Bushing 5 Leaf Slipper 2-1/2" x 30-1/2" w/ 3/4" Bronze Bushing 5 Leaf Slipper 3" x 30-1/2" 5 Leaf Slipper 3" x 30-1/2" 6 Leaf Slipper 3" x 30-1/2" 7 Leaf
Description
Ref#
HAP-103-00 HAP-203-01 HAP-203-02 HAP-203-03
9100012 Slipper Single Axle* 9100006 Slipper Tandem Axle 38" Spacing** 9100055 Slipper Tandem Axle 42-1/4" Spacing** 9100005 Slipper Tandem Axle 48-1/2" Spacing** * Complete single axle hanger kit. ** Single axle hanger kit is required with tandem axle kit to create a complete tandem axle hanger kit.
Description
5/8" Diameter 5" Round 8-15/16" Long
6151528
Ref#
6151565
Type
Idler Idler Straight w/ Oil Electric Electric Straight w/ Oil Hydraulic Duo-Servo Hydraulic Straight w/ Oil ABS Hydraulic Straight w/ Oil Hydraulic Disc Hydraulic Straight w/ Oil ABS Hydraulic Straight w/ Oil Air Hydraulic Straight w/ Oil ABS Hydraulic Straight w/ Oil
Part #
865 6151520 865 6151521 865 6151522 6151523 865 6151524 6151525 865 6151526 6151527 865 6151528 6151529
Part #
865 n/a 865 6151541 865 6151546 n/a 865 n/a n/a 865 6151549 6151550 865 6151553 6151556
Part #
865 n/a 865 6151540 865 6151544 6151545 865 6151542 6151543 865 6151547 6151548 865 6151551 6151552
Part #
8-275mm n/a 8-275mm 6151565 8-275mm 6151566 6151567 8-275mm n/a n/a 8-275mm 6151568 6151569 8-275mm 6151570 6151571
A-67
*** 13G & D Torflex axles are standard high profile, top mounted and oil bath.
TF#13G - 10,000 lb. General Duty Torflex Axles difference between Hub Face and Outside Mounting Bracket
Minimum Hub Face (Single Wheel) Track Width (Dual Wheel) 22.75" 23.50" Maximum 34.25 34.25
TF#13D - 10,000 lb. Heavy Duty Torflex Axles difference between Hub Face and Outside Mounting Bracket
Minimum Hub Face (Single Wheel) Track Width (Dual Wheel) 24.50" 25.25" Maximum 34.25 34.25
WWW.TEXTRAIL.COM
A-68
Item
1
Part #
7700081
Ref #
10-51
Unitized Oil Seal 3.88"OD x 2.875"ID 2 7800024 387A Inner Bearing Cup 3 7800052 382A Inner Race Cone 4 7800054 25520 Outer Bearing Cup 5 7800026 25580 Outer Bearing Cone 6 8750007 6-96 Spindle Nut (2) 7 8750037 5-70 Spindle Washer 8 8750038 5-71 Tang Washer 1.5"ID x 0.060" 7700030-01 TTOC373 Oil Cap Kit (Includes Items 9-11) 7700215-02 TTOC374 Oil Cap Kit (Includes Items 9-1,10-1 &11)* 9 7700030 21-36 Oil Cap - TWO PIECE Hub 9-1 7700215 21-88 Oil Cap - ONE PIECE Hub 10 7700054 10-50 O-Ring - TWO PIECE Hub 10-1 7700216 10-163 O-Ring - ONE PIECE Hub 11 7700052 46-32 Oil Cap Plug 12 7700011 7-245 1/2"-13 x 1.50" Drum Mounting Bolt 13 6450020 7-116 7/16"-20 x 1.75" Brake Mounting Bolt 14 6450181 6-17 7/16"-20 Brake Mounting Hex Nut 7030116 5-8 7/16" Lock washer * Use 7700215-01 Oil Cap Kit for DX 1-Piece Hub & Drum Assembly
Ref #
8-288-3 9-44-1 9-44-3 8-288-5 8-415-2 8-415-4
HUBS*** Description
Cupped & Studded 9K-10K GD Machined 9-10K GD NON-ABS ABS 9-10K GD ABS Assy 5/8"-18 Stud Oil 9-10K GD 5/8"-18 Stud Oil 9-10K GD 5/8"-18 Stud Oil 9-10K GD
Drums
20
Two-Piece Hubs & Drums One-Piece Hub & Drum One-Piece ABS Hub & Drum
Item Hubs
HUBS COMPLETE*** Includes bearings, seal, cap & lug nuts. Part # Ref # Description
7650088-02 8-288-91 5/8"-18 Stud Oil 9-10K GD
Part #
7700107 7700034 7700048 7700033
7650215-02
5/8"-18 x 3.16" Pressed Wheel Stud 5/8"-18 Flange Nut 5/8"-18 90 Deg Cone Nut Wheel Retaining / Clamp Ring
Item
21 22
Part #
6400044 6400045 6400014 6400015
* Must use the 90 Degree Cone Nut with the Wheel Retaining / Clamp Ring. Alternate fastener is just the flange nut (Item 17).
LH Electric 9-10K GD Assy 7-Bolt FSA RH Electric 9-10K GD Assy 7-Bolt FSA LH Hydraulic Duo-Servo 9-10K GD Assy RH Hydraulic Duo-Servo 9-10K GD Assy
Item
23 24 25
Part #
Ref #
97-4 24-204 97-2
Description
Straight Sensor Sensor Block Sensor Clip
Ref #
24-203
Description
Tone Ring - TWO PIECE Hub 24-205-1 Tone Ring - ONE PIECE Hub 7-248 Tone Ring Screws
WWW.TEXTRAIL.COM
A-69
10K Item Description 1 Unitized Oil Seal 4.50"OD x 3.125"ID 2 Inner Bearing Cone 3 Ref # 10-56 395S 3984 8-214-5 8-214-6 8-216-8 8-214-8 8-214-10 8-401-5 387A 28682 10-50 21-36 46-32 6-109 8-214-92 8-216-97 8-214-96 8-214-95 394A 3920 382A 28622 5-60 6-84 5-59 33-52-1 7-244 9-27-1 9-28-1 9-27-3 9-28-5 25-14 6-46 70-6-1 70-6-2 7-115 7-194 6-118
8 on 6.50
10K Disc
8 on 6.50
12K Low-Profile
8 on 6.50
12K Hi-Profile
8 on 6.50
12K Disc
8 on 6.50
15K
8 on 275 mm
7700077 7800040
7700077 7800004
7700077 7800004
7700077 7800004
7700077 7800004
4 5 6 7 8
9 10 11 12 13 14 15 16
17 18 19 20 21
Inner Bearing Cone Hubs with Cups & Studs Hubs with Cups & Studs Hubs with Cups & Studs Hubs with Cups & Studs Hubs with Cups & Studs Hubs with Cups & Studs Outer Bearing Cone Outer Bearing Cup Oil Cap O-Ring Oil Cap Oil Cap Plug Wheel Nut Hub Complete (Items 1-8) Hub Complete (Items 1-8) Hub Complete (Items 1-8) Hub Complete (Items 1-8 & 15-16) Inner Bearing Cup Inner Bearing Cup Outer Bearing Cup Outer Bearing Cup Spindle Washer 1.75"ID Spindle Nut 1.75"-12 Tang Washer 1.75"ID x .060" Wheel Clamp Ring Drum Mounting Bolt Brake Drum Brake Drum Brake Drum - ABS Brake Drum - ABS Rotor Mounting Bolt Rotor Mounting Nut Brake Drum Rotor Brake Drum Rotor - ABS Wheel Mounting Stud Wheel Mounting Stud Flange Nut (Swivel)
7650132 7650068 7650066 7650067 7650107 7800024 7700054 7700030 7700052 7700048 7650064-02 7800024 7700054 7700030 7700052 7700048 7800025 7700054 7700030 7700052 7700048 7650068-02 7650066-02 7650066-03 7800005 7800052 8750042 8750008 8750041 7700033 7700010 7650004 7650026 7650028 6450242 9000137 6450199 6450299 7700107 7650028 6450242 9000137 6450199 6450299 7700107 7700171 7700172 7650028 7800005 7800042 7800052 8750042 8750008 8750041 7700033 7800053 8750042 8750008 8750041 7700033 7700010 7650005 7800053 8750042 8750008 8750041 7700033 7700010 7650005 7800053 8750042 8750008 8750041 7700033 7800053 8750042 8750008 8750041 7700010 7650005 7800042 7800042 7800042 7800025 7700054 7700030 7700052 7700048 7800025 7700054 7700030 7700052 7700048 7800025 7700054 7700030 7700052
7700107
7700107
7700107
WWW.TEXTRAIL.COM
A-70
Rotary Style 8 on 6.5" Bolt 11" Leaf Spring & Pattern 5/8" 13" Torsion Bolts
Item
1 2 3 4
Part #
6450903 6450899 6450901 6450552 6450553 6451000 6451001
Ref #
DBC338MHGB DBC338MHBS DBC338MHBSB DBCFIFMP90 DBCNPTADPBBS DBCNPTBBS DBCNPTADP
Description 5/8" Leaf Spring Axle Kit, STD Rotor, E-Coat Caliper 5/8" Torsion Axle Kit, STD Rotor, E-Coat Caliper 5/8" Leaf Spring Axle Kit, SCAD 5/8" Torsion Axle Kit, SCAD 5/8" Leaf Spring Axle Kit, SCAD Rotor, SS Caliper 5/8" Torsion Axle Kit, SCAD Rotor, SS Caliper Description 5/8" Leaf Spring Axle Kit, STD Rotor, E-Coat Caliper 5/8" Torsion Axle Kit, STD Rotor, E-Coat Caliper 5/8" Leaf Spring Axle Kit, SCAD 5/8" Torsion Axle Kit, SCAD 5/8" Leaf Spring Axle Kit, SCAD Rotor, SS Caliper 5/8" Torsion Axle Kit, SCAD Rotor, SS Caliper
6450847
6450857
Torsion Axle Kit 6450756 ROTOR10ASPACERSCAD Kodiak's offers the ONLY complete ALL STAINLESS STEEL Disc Brake Set in the Industry. Stainless Steel is the best available corrosive resistant material. The Stainless Steel Kits come with a 6 Year Warranty verses the Standard 3 Year Limited Warranty. WWW.TEXTRAIL.COM
A-71
Rotor Spacer Standard Automotive Finish Rotor Spacer Silver Cadmium Plated
9K - 10K GD
10K
12K
15K
5 6 7 8 9 10
11 12 13 14 15
16 17 18
19 20 21
RH Adjuster Lever Adjuster Cable 10" Long Magnet Kit Magnet Kit Magnet Kit Magnet Spring Magnet Retaining Clip 7/16"-20 Anchor Post Flange Nut Magnet Retaining Clip LH Lever Arm Retainer RH Lever Arm Retainer LH Actuator Arm Assembly LH Actuator Arm Assembly RH Actuator Arm Assembly RH Actuator Arm Assembly Return Spring Adjuster Clip - Barrel End LH Adjuster Assembly RH Adjuster Assembly Adjuster Clip - Thread End LH Shoe & Lining Kit LH Shoe & Lining Kit LH Shoe & Lining Kit RH Shoe & Lining Kit RH Shoe & Lining Kit RH Shoe & Lining Kit Centering Spring 7/16"-20 x 1.75 Brake Mounting Bolt Dust Shield Dust Shield Dust Shield 7/16" Brake Mounting Lock washer 7/16"-20 Brake Mounting Hex Nut Wire Grommet 0.437 Dia.
WWW.TEXTRAIL.COM
Ref # 46-137 71-464 71-463 71-462 71-376 71-377 71-378 46-117 27-50 6-92-1 27-39 71-455-1 71-455-2 47-123-38 47-123-36 47-123-37 47-123-35 46-119 46-133 48-19 48-20 46-132 71-499 71-501 71-503 71-498 71-500 71-502 46-136 7-116 36-115-21 36-115-22 36-115-23 5-8 6-17 46-16
Qty 1 1 1 1 1 1 1 1 1 1 3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 7 1 1 1 7 7 1
A-72
6450232 6450194 6450177 6450102 6450211 6450212 6450271 6450270 6450237 6450101 6450011 6450010 6450100 6450059
6450232 6450194 6450177 6450102 6450211 6450212 6450271 6450270 6450237 6450101 6450011 6450010 6450100 6450041
6450232 6450194 6450177 6450102 6450211 6450212 6450267 6450268 6450237 6450101 6450011 6450010 6450100
6450183-01 6450232 6450194 6450177 6450102 6450211 6450212 6450267 6450268 6450237 6450101 6450011 6450010 6450100
6450048 6450060 6450042 6450097 6450020 6450118 6450097 6450020 6450269 7030116 6450181 6450001 7030116 6450181 6450001 6450117 7030116 6450181 6450001 6450047 6450097 6450020
6450048
Item Description 1 Dust Shield Dust Shield Dust Shield 2 Retainer Ring 3 LH Shoe & Lining Kit LH Shoe & Lining Kit LH Shoe & Lining Kit RH Shoe & Lining Kit RH Shoe & Lining Kit RH Shoe & Lining Kit 4 Shoe Hold Down Screw 5 Adjuster Cable 10" Long 6 Wheel Cylinder Kit 7 Cylinder Push Rod 8 Spider Assembly 9 Spring Retractor 10 LH Adjuster Lever RH Adjuster Lever 11 LH Adjuster Spring RH Adjuster Spring 12 Cable Attachment Bracket 13 Spring Extension 14 Adjuster Clip - Barrel End 15 LH Adjuster Assembly RH Adjuster Assembly 16 7/16"-20 x 1.75 Brake Mounting Bolt 17 Piston Stop 18 Adjuster Clip - Thread End 19 7/16"-20 Brake Mounting Hex Nut 20 7/16" Brake Mounting Lockwasher
WWW.TEXTRAIL.COM
Ref # 36-115-21 36-115-22 36-115-23 69-53 71-165 71-167 71-169 71-166 71-168 71-170 7-113 71-462 71-81 54-33 36-63-6 46-87 71-464 71-463 46-135 46-134 71-456 46-131-1 46-133 48-19 48-20 7-116 34-62 46-132 6-17 5-8
Qty 1 1 1 1 1 1 1 1 1 1 2 1 1 2 1 1 1 1 1 1 1 1 1 1 1 7 1 1 7 7
15K 12 1/4 x 5
6450264 6450081
6450264 6450074
6450117 6450264
6450117 6450264
6450077 6450080 6450073 6450203 6450088 6450028 6450259 6450317 6450219 6450146 6450150 6450013 6450014 6450280 6450291 6450101 6450011 6450010 6450020 6450260 6450100 6450181 7030116 6450203 6450088 6450028 6450259 6450317 6450219 6450146 6450150 6450013 6450014 6450280 6450291 6450101 6450011 6450010 6450020 6450260 6450100 6450181 7030116 6450076 6450203 6450088 6450028 6450259 6450317 6450219 6450146 6450150 6450013 6450014 6450280 6450291 6450101 6450011 6450010 6450020 6450260 6450100 6450181 7030116
6450077
6450076 6450203 6450088 6450028 6450259 6450317 6450219 6450146 6450150 6450013 6450014 6450280 6450291 6450101 6450011 6450010 6450020 6450260 6450100 6450181 7030116
A-73
Item 1 2 3
Description Anchor Yoke Assembly (includes 6ea of Item 6) Caliper Assembly (includes items 3, 6, 9 & 10) Caliper Piston Disc Brake Replacement Pad Kit (includes items 4, 5, 8 & 11)
Qty 1 1 2 1
Caliper Repair Kit (includes items 6, 7, 9 & 10 12 Shoulder Screw / Caliper Guide Bolt 5/8" x 5" 13 7/16"-20 x 1.75 Brake Mounting Bolt 14 1/2"-20 Grade B Flange Nut 15 7/16"-20 Grade 5 Hex Nut 16 1/2"-13 x 1/2"-20 x 2.38 Grade 5 Rotor Stud
1 2 7 8 7 8
WWW.TEXTRAIL.COM
A-74
PQ Style
6450274
6450096
Qty per Brk
Item
1 2 3 4 5 6 7 8 9 10 11
10K
12 1/4 x 4
6450262 6050047 6050045 6450274
12K-15K
12 1/4 x 5
6450263 6400001 6050046
Description
Shoe & Lining Assembly - Shoe & Block Top Shoe & Roller Assembly - Includes 2, 6-8 & 11 Bottom Shoe & Roller Assembly - Includes 2, 6-8 & 11 Brake Shoe Hardware Kit (Contains Items 3-11) Spider Anchor Bushing Pin 1.26ID X 1.37 OD 1.45 Long Shoe Keeper Spring
Ref #
40-320-1 40-320-2 40-320-3 K71-460 2 1 1 1 2 2 2 2 2 1 1 2 2 K71-101 1 2 1 1 1 1 1 1 1 4 4 2 1 4 1 1 1 1 1 1 1 1 2 2 2 2 1 1 1 1 2
Anchor Pin 1.25 X 2.218 Double Ended 1.00 Dia Roller Pin Retainer Ring for 0.750 Shaft Washer Plain 0.75 x 0.149 Roller Pin Spacer Roller 0.75 ID X 1.5 OD x 1.38 Steel Plated & Knurled Retractor Spring Retainer Pin Roller Pin Knurled 0.75 x 2.16 Camshaft Repair Kit (Contains Items 12-20) 12 Camshaft D Washer 13 Grease Seal Single Lip / Single Case 1.5 x 1.875 x 0.188 14 Camshaft Nylon Bushing 1.88 OD x 1.5 ID x 1.5 Long 15 Camshaft Spider End 16 Camshaft Retainer Ring 17 Grease Zerk 1/4-27 65 Degree Angle 1/8-27 MPT 18 Camshaft Support Bushing 19 Washer Plain 1.26 x 1.88 x .06 Camshaft 20 Camshaft End Retainer Camshaft End Retainer 21 1/4"-20 Zinc Plated Hex Nut 22 1/4" 0.062 Zinc Plated Lock Washer 23 Plate - Bushing Retainer 24 Plate - Camshaft Support Bracket 25 1/4"-20 X 0.88 Zinc Plated GR-2 Retainer Plate Hex Bolt 26 Auto Slack Adjuster - 28 Spline Manual Slack Adjuster - 28 Spline 27 LH Small S Head Hi Rise Cam Shaft 21.125" RH Small S Head Hi Rise Cam Shaft 21.125" LH Small S Head Hi Rise Cam Shaft 16.375" RH Small S Head Hi Rise Cam Shaft 16.375" LH Small S Head Hi Rise Cam Shaft 22.312" RH Small S Head Hi Rise Cam Shaft 22.312" 28 Nut - 2-5/8" Fine Outer Spindle Nut 29 Lock washer - Tab 30 Lock washer - Indexing 31 Nut - 2-5/8" Fine Inner Spindle Nut ABS Components: 32 ABS Sensor Retaining Clip 33 ABS Sensor 90 Degree 34 ABS Tone Ring in Drum 35 ABS Upper Sensor Mounting Block 36 ABS Upper Sensor Mounting Screw
34-32 34-31
34-188 34-189 34-188-1 34-189-1 34-188-3 34-189-3 6-115 5-99 5-98 6-114 97-2 97-3 24-203 24-101-1 7-237
SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER 6050035 6050035 6050036 6050036 6050033 6050033 6050034 6050034 6050037 6050037 6050038 6050038 8750056 8750056 8750058 8750058 7800073 7800073 8750055 8750055 6050055 6050055 6050056 6050056 SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER
* Note: 005-076-00 is required for 10K 12-1/4"x4" with 1/4" show web thickness. Not required for 5/16" thickness.
WWW.TEXTRAIL.COM
A-75
Part #
7800030 7800075 7800074 7800031 7700183 7700035 7700178 7700146 7700177 7700172 7700171
OIL LUBE PARTS Description HM212049 Outer Bearing Cone HM212011 Outer Race Cup HM218210 Inner Bearing Cup HM218248 Inner Race Cone 940-4009 Oil Cap Kit (includes items 5-8) 71-124 Oil Cap Gasket 21-38-2 Oil Cap 7-157 Oil Cap Hex Screw 5/16"-18 x 0.75 5-100 Oil Cap Lock Washer 5/16" 6-118 Swivel Flange Nut 7-194 Press-In Stud M22 x 1.5 x 2.47" L 24-200-1 ABS Tone Ring Ref #
Ref #
9-116-1
Bolt Circle
8 on 275mm
Bolt Circle
8 on 275mm 8 on 275mm
A B C D E F G H I J
Hub & Drum Dimensional Information 3.34" Cup to Cup 0.75" Cup to Mounting Face 10.43" Cup to End of Drum 12.25" Brake Diameter 7.50" Shoe Brake Width 11.22" Drum Overall Width 9.00" Pilot Diameter (Drum) 10.827" Bolt Circle 275mm M22 x 1.5 Bolt Diameter 0.313" Hub Cap Hole Mounting 6 Holes 5.50 BC 1.575" Inner Bearing Cup and Cone Overall Stack Thickness
WWW.TEXTRAIL.COM
A-76
Part #
7800074 7800031 7800075 7800030 7700183 7700035 7700178 7700146 7700177 7700042 7700041 7700047 7700046 7700149 7700148 7030108 9000139
Ref #
HM218210 HM218248 HM212011 HM212049 940-4009 71-124 21-38-2 7-157 5-100 6-70-1 6-70-2 6-69-1 6-69-2 25-56-2 25-56-1 5-102 6-47 24-200-1
OIL LUBE PARTS Description Inner Bearing Cup Inner Race Cone Outer Bearing Cup Outer Race Cone Oil Cap Kit (includes items 5-8) Oil Cap Gasket Oil Cap Oil Cap Hex Screw 5/16"-18 x 0.75 Oil Cap Lock Washer 5/16" RH 1-1/8"-16 Outer Dual Wheel Nut LH 1-1/8"-16 Outer Dual Wheel Nut RH 3/4"-16 x 1-1/8"-16 Inner Dual Wheel Nut LH 3/4"-16 x 1-1/8"-16 Inner Dual Wheel Nut LH Shoulder Stud RH Shoulder Stud Washer Flat 3/4" 3/4"-16 Locknut ABS Tone Ring
Ref #
9-40-1
DRUM Description
Bolt Circle
Bolt Circle
10 on 8.75 10 on 8.75 10 on 8.75 10 on 8.75
LH Hub 10 8.75 BC RH Hub 10 8.75 BC LH Hub 10 8.75 BC ABS RH Hub 10 8.75 BC ABS
A B C D E F G H I J
3.34" 0.81" 10.57" 12.25" 7.50" 10.50" 7.12" 8.75" 0.75" 0.313" 1.575"
Hub & Drum Dimensional Information Cup to Cup Cup to Mounting Face Cup to End of Drum Brake Diameter Shoe Brake Width Drum Overall Width Pilot Diameter Bolt Circle Bolt Diameter Hub Cap Hole Mounting 6 Holes 5.50 BC Inner Bearing Cup and Cone Overall Stack Thickness
WWW.TEXTRAIL.COM
A-77
Part #
7800074 7800031 7800075 7800030 7700183 7700035 7700178 7700146 7700177 7700042 7700041 7700047 7700046 7700149 7700148 7030108 9000139
Ref #
HM218210 HM218248 HM212011 HM212049 940-4009 71-124 21-38-2 7-157 5-100 6-70-1 6-70-2 6-69-1 6-69-2 25-56-2 25-56-1 5-102 6-47 24-200-1
OIL LUBE PARTS Description Inner Bearing Cup Inner Race Cone Inner Bearing Cup Inner Race Cone Oil Cap Kit (includes items 4-7) Oil Cap Gasket Oil Cap Oil Cap Hex Screw 5/16"-18 x 0.75 Oil Cap Lock Washer 5/16" RH 1-1/8"-16 Outer Dual Wheel Nut LH 1-1/8"-16 Outer Dual Wheel Nut RH 3/4"-16 x 1-1/8"-16 Inner Dual Wheel Nut LH 3/4"-16 x 1-1/8"-16 Inner Dual Wheel Nut LH Shoulder Stud RH Shoulder Stud Washer Flat 3/4" 3/4"-16 Locknut ABS Tone Ring
Ref #
9-42-1
Bolt Circle
10 on 11.25
Bolt Circle
10 on 11.25 10 on 11.25
A B C D E F G H I
J
Hub & Drum Dimensional Information Cup to Cup Cup to Mounting Face Cup to End of Drum Brake Diameter Shoe Brake Width Drum Overall Width Pilot Diameter Bolt Circle Bolt Diameter Hub Cap Hole Mounting 6 Holes 5.50 BC Inner Bearing Cup and Cone Overall Stack Thickness
WWW.TEXTRAIL.COM
A-78
Part #
7800074 7800031 7800075 7800030 7700183 7700035 7700178 7700146 7700177 7700042 7700041 7700047 7700046 7700149 7700148
Ref #
HM218210 HM218248 HM212011 HM212049 940-4009 71-124 21-38-2 7-157 5-100 6-70-1 6-70-2 6-69-1 6-69-2 7-242-1 7-242 6-124-2 6-124-1 24-200-1
OIL LUBE PARTS Description Inner Bearing Cup Inner Race Cone Outer Bearing Cup Outer Race Cone Oil Cap Kit (includes items 4-7) Oil Cap Gasket Oil Cap Oil Cap Hex Screw 5/16"-18 x 0.75 Oil Cap Lock Washer 5/16" RH 1-1/8"-16 Outer Dual Wheel Nut LH 1-1/8"-16 Outer Dual Wheel Nut RH 3/4"-16 x 1-1/8"-16 Inner Dual Wheel Nut LH 3/4"-16 x 1-1/8"-16 Inner Dual Wheel Nut LH Shoulder Stud RH Shoulder Stud RH 1-1/8"-16 Outer Dual Wheel Nut LH 1-1/8"-16 Outer Dual Wheel Nut ABS Tone Ring
Ref #
9-43-3
Bolt Circle
10 on 11.25
Ref #
8-290-68 8-290-67
Bolt Circle
10 on 11.25 10 on 11.25 10 on 11.25 10 on 11.25
LH Wheel Hub Assy RH Wheel Hub Assy 8-290-70 LH ABS Wheel Hub Assy 8-290-69 RH ABS Wheel Hub Assy
A B C D E F G H I J
3.34" 0.73" 9.87" 16.50" 7.00" 10.60" 8.78" 11.25" 0.75" 0.313" 1.575"
Hub & Drum Dimensional Information Cup to Cup Cup to Mounting Face Cup to End of Drum Brake Diameter Shoe Brake Width Drum Overall Width Pilot Diameter (Drum) Bolt Circle 275mm Bolt Diameter Hub Cap Hole Mounting 6 Holes 5.50 BC Inner Bearing Cup and Cone Overall Stack Thickness
WWW.TEXTRAIL.COM
A-79
C 1.50" Dia. Shaft 1.50" Dia. Shaft 1.50" Dia. Shaft 1.50" Dia. Shaft 1.50" Dia. Shaft 1.50" Dia. Shaft 1.50" Dia. Shaft 1.50" Dia. Shaft
Item Description 1 Shoe & Lining Assembly - Shoe & Block Brake Shoe Hardware Kit (Contains Items 2-8) 2 Spider Anchor Bushing Pin 1.26"ID X 1.37" OD 1.45" Long 3 Bushing - Spider Anchor Pin 4 Retractor Spring 16-1/2" Brake - Orange 5 Shoe Keeper Spring - Orange 6 Anchor Pin 7 Retainer Pin - Retractor Spring 8 Roller Retainer Camshaft Repair Kit (Contains Items 12-20) 9 Camshaft Washer 10 Grease Seal Single Lip / Single Case 1.5 x 1.875 x 0.188 11 Camshaft Nylon Bushing 1.88" OD x 1.5" ID x 1.5" Long 12 Washer Plain Camshaft Spider End 13 Camshaft Retainer Ring 14 Grease Zerk 1/4"-27 65 Degree Angle 1/8"-27 MPT 15 Camshaft Support Bushing 16 Washer Plain 1.26 x 1.88 x .06 Camshaft 17 Camshaft End Retainer 18 1/4-20 Zinc Plated Hex Nut 19 1/4 0.062 Zinc Plated Lock Washer 20 Plate - Bushing Retainer 21 Plate - Camshaft Support Bracket 22 1/4-20 X 0.88 Zinc Plated GR-2 Retainer Plate Hex Bolt 23 Auto Slack Adjuster - 28 Spline Manual Slack Adjuster - 28 Spline 24 LH Small S Head Hi Rise Cam Shaft 21.125 RH Small S Head Hi Rise Cam Shaft 21.125 LH Small S Head Hi Rise Cam Shaft 16.375 RH Small S Head Hi Rise Cam Shaft 16.375 LH Small S Head Hi Rise Cam Shaft 22.312 RH Small S Head Hi Rise Cam Shaft 22.312 25 Nut - 2-5/8 Fine Outer Spindle Nut 26 Lock washer - Tab 27 Lock washer - Indexing 28 Nut - 2-5/8 Fine Inner Spindle Nut ABS Components: 32 ABS Sensor Retaining Clip 33 ABS Sensor 90 Degree 34 ABS Tone Ring in Drum 35 ABS Upper Sensor Mounting Block 36 ABS Upper Sensor Mounting Screw
2 1 2 2 1 2 2 2 2 1 2 1 1 1 1 1 1 1 4 4 2 1 4 1 1 1 1 1 1 1 1 2 2 2 2 1 1 1 1 2
K71-135
6450284 6050048 6050049 6050050 6050051 6050053 9000096 6050052 SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER 6050035 6050036 6050033 6050034 6050037 6050038 8750056 8750056 7800073 8750055 6050055 6050056 SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER
6450274
34-32 34-31
34-188 34-189 34-188-1 34-189-1 34-188-3 34-189-3 6-115 5-99 5-98 6-114 97-2 97-3 24-203 24-101-1 7-237
6450284
* Note: 005-076-00 is required for 10K 12-1/4"x4" with 1/4" show web thickness. Not required for 5/16" thickness.
WWW.TEXTRAIL.COM
A-81
Item Description Shoe & Lining Assembly - Shoe & Block 1 Top Shoe & Roller Assembly - Includes 2, 6-8 & 11 2 Bottom Shoe & Roller Assembly - Includes 2, 6-8 & 11 Brake Shoe Hardware Kit (Contains Items 3-11) 3 Spider Anchor Bushing Pin 1.26"ID X 1.37" OD 1.45" Long 4 Shoe Keeper Spring 5 Anchor Pin 1.25 X 2.218 Double Ended 1.00 Dia 6 Roller Pin Retainer Ring for 0.750 Shaft 7 Washer Plain 0.75" x 0.149" Roller Pin Spacer 8 Roller 0.75" ID X 1.5" OD x 1.38" Steel Plated & Knurled 9 Retractor Spring 10 Retainer Pin 11 Roller Pin Knurled 0.75" x 2.16" Camshaft Repair Kit (Contains Items 12-20) 12 Camshaft "D" Washer 13 Grease Seal Single Lip / Single Case 1.5 x 1.875 x 0.188 14 Camshaft Nylon Bushing 1.88" OD x 1.5" ID x 1.5" Long 15 Washer Plain 1.5 x 2.25 x .09 Camshaft Spider End 16 Camshaft Retainer Ring 17 Grease Zerk 1/4"-27 65 Degree Angle 1/8"-27 MPT 18 Camshaft Support Bushing 19 Washer Plain 1.26 x 1.88 x .06 Camshaft 20 Camshaft End Retainer 21 1/4-20 Zinc Plated Hex Nut 22 1/4 0.062 Zinc Plated Lock Washer 23 Plate - Bushing Retainer 24 Plate - Camshaft Support Bracket 25 1/4-20 X 0.88 Zinc Plated GR-2 Retainer Plate Hex Bolt 26 Auto Slack Adjuster - 28 Spline Manual Slack Adjuster - 28 Spline 27 LH Small S Head Hi Rise Cam Shaft 21.125 RH Small S Head Hi Rise Cam Shaft 21.125 LH Small S Head Hi Rise Cam Shaft 16.375 RH Small S Head Hi Rise Cam Shaft 16.375 LH Small S Head Hi Rise Cam Shaft 22.312 RH Small S Head Hi Rise Cam Shaft 22.312 28 Nut - 2-5/8 Fine Outer Spindle Nut 29 Lock washer - Tab 30 Lock washer - Indexing 31 Nut - 2-5/8 Fine Inner Spindle Nut ABS Components: 32 ABS Sensor Retaining Clip 33 ABS Sensor 90 Degree 34 ABS Tone Ring in Drum 35 ABS Upper Sensor Mounting Block 36 ABS Upper Sensor Mounting Screw
2 1 1 1 2 2 2 2 2 1 1 2 2 1 2 1 1 1 1 1 1 1 4 4 2 1 4 1 1 1 1 1 1 1 1 2 2 2 2 1 1 1 1 2
6450274
6450096 6050048 6050049 6050050 6050051 6050053 9000096 6050052 SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER 6050035 6050036 6050033 6050034 6050037 6050038 8750056 8750058 7800073 8750055 6050055 6050056 SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER
K71-101
6450096
34-32 34-31
34-188 34-189 34-188-1 34-189-1 34-188-3 34-189-3 6-115 5-99 5-98 6-114 97-2 97-3 24-203 24-101-1 7-237
* Note: 005-076-00 is required for 10K 12-1/4"x4" with 1/4" show web thickness. Not required for 5/16" thickness.
WWW.TEXTRAIL.COM
A-82
Spindles are machined to 1"-14 Thread with .190 cotter pin hole and come with spindle nut, washer and cotter pin. EZ-Lube Spindles come with spindle nut washer and tang washer.
Part# Ref # Description A
Shank Dia. 8750016 8750057 8750087 8750017 8750089 8750011 8750090 8750091 8750028 8750029 8750022 8750054 8750024 8750014 8750015 8750018 8750020 8750088 8750012 8750021 8750023 8750013
R104BT8 R104BT16 R104BT16EZ R104BTR R104BT8-38 R204BT8 R204BTR R20484 R20484EZ R30484EZ R30484 R30684 R306.584 R40484 R40684 R40642 R50642 R50342EZ SP204BT8 SP20484 SP30684 SP50642
F
Shank Length
B
Seal
C
Inner Bearing
D
Outer Bearing
Capacity
BT8 SPINDLE W/NUT WASHER &C-PIN BT16 SPINDLE W/NUT WASHER & C-PIN BT16 EZ-LUBE SPINDLE W/NUT & WASHERS BT16 SPINDLE W/NUT WASHER & C-PIN BT8 SPINDLE W/NUT WASHER & C-PIN BT8 SPINDLE W/NUT WASHER &C-PIN BT16 SPINDLE W/NUT WASHER & C-PIN NO.84 SPINDLE W/NUT WASHER &C-PIN NO.84 EZ-LUBE W/NUT & WASHERS NO.84 EZ-LUBE W/NUT & WASHERS NO.84 SPINDLE W/NUT WASHER &C-PIN NO.84 SPNDL W/NUT WASHER &C-PIN 10-7/8" NO.84 SPNDL W/NUT WASHER &C-PIN 11-3/8" NO.84 SPINDLE STUB W/NUT WASHER & C-PIN NO.84 SPINDLE STUB W/NUT WASHER & C-PIN NO.42 SPNDL W/NUT WASHER &C-PIN NO.42 SPNDL W/NUT WASHER &C-PIN NO.42 GRSLUBE FLGD W/NUT&WSHR BT8 SPINDLE SQUARE W/NUT WASHER &C-PIN 84 SPINDLE SQUARE W/NUT WASHER &C-PIN 84 SPINDLE SQUARE W/NUT WASHER &C-PIN 42 SPINDLE SQUARE W/NUT WASHER &C-PIN
1.25 1.25 1.25 1.25 1.38 1.50 1.50 1.50 1.50 1.75 1.75 1.75 1.75 2.00 2.00 2.00 2.25 2.25 1.50 1.50 1.75 2.00
3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 4.00 6.00 6.50 4.00 6.00 6.00 6.00 3.00 4.00 3.50 6.50 6.50
1.24 1.24 1.24 1.50 1.24 1.24 1.50 1.73 1.73 1.73 1.73 1.73 1.73 1.73 1.73 2.24 2.24 2.24 1.24 1.73 1.73 2.24
0.99 1.06 1.06 1.06 0.99 0.99 1.06 1.38 1.38 1.38 1.38 1.38 1.38 1.38 1.38 1.74 1.74 1.74 0.99 1.38 1.38 1.74
0.99 1.06 1.06 1.06 0.99 0.99 1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.25 1.25 1.25 0.99 1.06 1.06 1.25
1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00
1,000 lb. 1,000 lb. 1,000 lb. 1,000 lb. 1,000 lb. 1,000 lb. 1,000 lb. 1,750 lb. 1,750 lb. 1,750 lb. 1,750 lb. 1,750 lb. 1,750 lb. 1,750 lb. 1,750 lb. 3,000 lb. 3,000 lb. 2,600 lb. 1,000 lb. 1,750 lb. 1,750 lb. 3,000 lb.
Agricultural Spindles
Part#
Ref #
Description
A
Shank Dia.
F
Overall Length
B
Seal
C
Inner Bearing
D
Outer Bearing
E
Treads
G
Distance to Center line of Cotter Pin
Capacity
2.5K Round AG Spindle 3.5K Round AG Spindle 4.5K Round AG Spindle 6K Round AG Spindle
WWW.TEXTRAIL.COM
Type 3 1 2 4 1 1 5 3 5 3 n/a 6 6 6 1 2 2 1
Part# 8750035 8750036 8750033 8750040 8750046 8750034 8750038 8750037 8750041 8750042 7800073 7700125 7700129 7700131 8750039 8750032 8750031 8750096
Ref # 16-5863 SW1001 5-23 5-101 5-151 5-57 5-71 5-70 5-59 5-60 5-98 5-150 5-147-1 5-149 90525 H500-18 H500-17 SW750
Description Tongue Washer - Replacement Spindles Round Washer - Replacement Spindles Dexter D-Washer - 2K thru 6K (655 Hub) Dexter EZ-Lube Tang Washer - 2K thru 8K (before 6/02) Dexter EZ-Lube D-Washer - 2K thru 8K (before 6/02) Dexter D-Washer - 6K (865 Hub) thru 8K (9K before 10/89) Dexter Tang Washer - 9K & 10GD Dexter Tongue Washer - 9K & 10GD Dexter Tang Washer - 10K, 12K & 15K Dexter Tongue Washer - 10K, 12K & 15K Dexter Indexing Lock Washer 22.5 thru 27K 0.250" 14 Equally Spaced Holes Dexter 35MM Nev-R-Lube Spindle Washer 1.88" OD x 0.250"W Dexter 42MM Nev-R-Lube Spindle Washer 2.25" OD x 0.250"W Dexter 50MM Nev-R-Lube Spindle Washer 2.50" OD x 0.310"W AL-KO / Hayes Round Washer - 10-16K AL-KO / Belshe #99 Spindle Thin D-Washer AL-KO / Belshe #99 Spindle Thick D-Washer Reliable AG Round Washer x 1.750" OD x 0.183"W Spindle Nuts / Jam Nuts / Cotter Pins
ID 1" 1" 1" 1" 1" 1" 1.50" 1.50" 1.75" 1.75" 2.625" 1.062" 1" 1.062" 1.50" 0.812"
Type 3 7 8 5 1 2 6 4 4 2 4 4 Type 3 3 3 3
Item # 8750005 8750006 8750030 8750007 8750008 8750010 8750051 8750049 7700126 8750003 8750002 8750061 8750063 8750064 Item # 8750100-01 8750101-01 8750102-01 8750103-01
Ref # 6-1 6-191 6-190 6-96 6-84 090623 6-114 6-115 6-183 19-2 091903 SN750 SCP103 SCP102 Ref # TTSN01 TTSN02 TTSN03 TTSN04
Description 1"-14 Castle Nut 2K - 8K (Dexter 2-8K & 9K before 10/89) 1"-14 Jam Nut - 2K thru 8K (Dexter use after 8/03) Spindle Nut Retainer - Use with 6-191 1-1/2"-12 Nut - Dexter 9K & 10GD 1-3/4"-12 Nut - Dexter 10K thru 15K 1-1/2"-12 Castle Nut - #99 Spindle (AL/KO #99 & #89) 2-5/8"-6 Inner Nut - 20K thru 27K 2-5/8"-6 Outer Nut - 20K thru 27K Spindle Nut - Dexter Nev-R-Lube Cotter Pin 1/8" x 1-3/4" long Cotter Pin - AL/KO 8K thru 16K (#89 & 99 spindle) Reliable Castle Nut 3/4"-16 ID Reliable Cotter Pin - 0.148" Dia x 5/16" W x 1.50" Long Reliable Cotter Pin - 0.174" Dia x 3/8" W x 1.937" Long Spindle Nut Kits Description 1" Castle Nut with 1" Tongue Washer & Cotter Pin 2-8K (2ea) 1" Castle Nut with 1" Round Washer & Cotter Pin 2-8K (2ea) 1" Castle Nut with 1" D-Washer, Tang Washer & Cotter Pin 3.5-6K (2ea) 1" Castle Nut with 1" D-Washer, Tang Washer & Cotter Pin 7-8K (2ea)
WWW.TEXTRAIL.COM
A-84
7650150-02
Item
1 2 3 4 5 6 7 8 9 10 11 12
25555FC
Ref #
S2500F SL175 LM48548 LM48510 LM67010 LM67048 SW750 SN750 SCP103 1604 25555F STN509 25555FC
Part #
8750050 7700245 7800012 7800049 7800045 7800043 8750096 8750061 8750063 7700275 7650150 7700285 7650150-02
7650170-02
Item
1 2 3 4 5 6 7 8 9 10 11 12
35660FC
Ref #
S3500F SL200 LM67048 LM501349 LM67010 LM501310 SW750 SN750 SCP103 1604 35660F STN569 35660FC
Part #
8750060 7700250 7800043 7800078 7800045 7800079 8750096 8750061 8750063 7700275 7650170 7700037 7650170-02
WWW.TEXTRAIL.COM
7650180-02
Item
1 2 3 4 5 6 7 8 9 10 11 12
45880FC
Ref #
S4500F SL226 LM603049 LM603011 LM67010 LM67048 SW750 SN750 SCP103 1604 45880F STN569 45880FC
Part #
8750070 7700255 7800081 7800080 7800045 7800043 8750096 8750061 8750063 7700275 7650180 7700037 7650180-02
7650190-02
Item 1 2 3 4 5 6 7 8 9 10 11 12 Part # 8750080 7700260 7800079 7800082 7800078 7800083 8750036 8750005 8750064 7700280 7650190 7700290 7650190-02
60880FC
Ref # S6000F SL275 LM501310 JLM506810 LM501349 JLM506849 SW1001 SN1001 SCP102 1609 60880F STN629 60880FC
WWW.TEXTRAIL.COM
Ref # Description 3-49 SPRING SEAT FOR 1.75" RND AXLE 3-43 SPRING SEAT FOR 2 3/8" RND AXLE 3-42 SPRING SEAT FOR 3" RND AXLE 3-48 SPRING SEAT FOR 3 1/2" RND AXLE 3-51 SPRING SEAT FOR 4" RND AXLE 3-72 SPRING SEAT FOR 5" RND AXLE - 10GD 2.5" SPR 3-66 SPRING SEAT FOR 5" RND AXLE - 10K-15K 3" SPR Brake Mounting Flanges
Item #
6450033 6450034 6450029
Ref # Description 4-34 Brake Flange 2K Type K BTR 4-35 Brake Flange 3.5K Type K 4-44-1 Brake Flange 5.2K - 7K Type B Brake Mounting Hardware
Use With
1.75" Round 2.375" Round 3" Round
Holes
4-Hole 4-Hole 5-Hole
Bolt Centers
4" 4" 3.88"
Pilot
1.64" 2.27" 2.75"
Item #
6450241 6450307 6450240 6450019 6450020 7700011 7700010 6450181 6450177 6450182 6450308 9000137 7030116 9000250 9000251
Ref # Description 7-75 7/16"-20 x 0.89" Grade 5 Pressed Brake Mounting Stud 7-271 7/16"-20 x 1.18" Grade 5 Pressed Brake Mounting Stud 7-112 3/8"-24 x 0.88" Grade 5 Pressed Brake Mounting Stud 7-97 1/2"-20 x 1.75" Grade 5 Pressed Brake Mounting Stud 7-116 7/16"-20 x 1.75" Grade 5 Brake Mounting Bolt 7-245 1/2"-13 X 1.5" Grade 8 Brake Drum Mounting Bolt 7-244 1/2"-13 X 1.75" Grade 8 Brake Drum Mounting Bolt 6-17 7/16"-20 Grade 5 Brake Mounting Hex Nut 6-92 7/16"-20 Grade B Lock Flange Nut 6-10 3/8"-20 Grade 5 Brake Mounting Hex Nut 6-193 3/8"-24 Grade B Brake Mounting Nut 6-46 1/2"-20 Grade B Brake Mounting Nut 5-8 7/16" Brake Mounting Lock Washer 33621 3/8" Brake Mounting Lock Washer 5-58 1/2" Brake Mounting Lock Washer
Axle
2K - 3.5K 4.4K 5.2K - 7K 7.2K - 9K 9K - 15K 9K - 10KGD
10KHD - 15K
WWW.TEXTRAIL.COM
A-87
Greased
Grease Seals
Item # 7700060 7700082 7700083 7700085 7700086 7700073 7700240 7700245 7700250 7700255 7700260 7700061 7700071 7700137 7700063 7700075 7700062 7700064 7700065 6050049 7700088 7700076 7700089 7700081 7700077 7700079 7700188 7700189 Ref# 12192TB 10-9 10-60 10-19 10-10 10-36 SL150 SL175 SL200 SL226 SL275 3150 3149 168233 29031 475380 10-42 10-40 10-41 10-52 10-63 568303 10-48 10-51 10-56 10-55-1 320-2110 315-1504 Description BT8 Double Lip Grease Seal 2K BT16 Single Lip Grease Seal 2K BT16 Double Lip Grease Seal 2K 84F Double Lip Grease Seal 3.5K - 4.4K 42F Double Lip Grease Seal 5.2K - 7K 42F Double Lip Grease Seal 5.2K - 7K AG Single Lip Seal 1.2K AG Single Lip Seal 2.5K AG Single Lip Seal 3.5K AG Single Lip Seal 4.5K AG Single Lip Seal 6K HADCO-Single Slip Grease Seal HADCO-Single Slip Grease Seal Nitrile / Unique #84 Single Lip Grease Seal Hayes #8 Spindle Grease Seal BTI #79-99 Spindle Grease Seal Mobile Home Single Lip Grease Seal 2.8K Mobile Home Single Lip Grease Seal Mobile Home Single Lip Grease Seal Camshaft Case Single Lip Grease Seal I.D. 1.249 1.500 1.500 1.719 2.125 2.250 1.500 1.750 2.000 2.250 2.750 1.750 2.000 1.688 1.875 2.375 1.750 1.938 1.938 1.500 2.250 2.750 2.375 2.875 3.125 4.625 4.733 O.D. 1.983 1.987 1.987 2.565 3.376 3.376 2.332 2.722 3.066 3.066 3.756 2.356 2.875 2.332 3.000 3.623 2.331 2.510 2.523 1.875 3.376 3.779 3.376 3.880 4.506 6.006 6.000 -
Oil Seals
Unitized Oil Seal Dexter 5.2K - 7K / Hayes 8K Hayes/Texoma #99 Spindle CR Oil Seal Unitized Double Lip / Double Case Oil Seal 8K - 9K Unitized Oil Seal 9K - 10K General Duty Unitized Oil Seal 10K - 15K Unitized Oil Seal 20K - 25K Stemco Oil Seal 22.5K Stemco Wear Ring 22.5K
WWW.TEXTRAIL.COM
A-88
Replacement Bearings
Item #
7800015 7800008 7800001 7800007 7800010 7800027 7800017 7800028 7800043 7800029 7800016 7800012 7800006 7800013 7800026 7800081 7800087 7800009 7800014 7800083 7800025 7800024 7800011 7800003 7800004 7800084 7800030 7800079 7800031 7800040 7800063 7800065 7800067
Replacement Races
I.D. 0.750 0.750 0.938 1.000 1.063 1.125 1.125 1.250 1.250 1.313 1.313 1.375 1.378 1.500 1.750 1.781 1.796 1.969 2.000 2.165 2.250 2.250 2.250 2.559 2.625 2.625 2.625 2.891 3.542 4.331
35MM 42MM 50MM
A-89
Ref#
09067 LM11949 1779 L44643 L44649 15123 14125A 02475 LM67048 2585 M88048 LM48548 L68149 2788 25580 LM603049 25590 JM205149 28580 JLM506849 28682 387A 45290 JM511946 3984 39590 HM212049 LM501310 HM218248 395S 31-72-3 31-73-3 31-71-3
Description Bearing Cone for Race 09194 Bearing Cone for Race LM11910 Bearing Cone for Race 1729 Bearing Cone for Race L44610 Bearing Cone for Race L44610 Bearing Cone for Race 15245 Bearing Cone for Race 14276 Bearing Cone for Race 02420 Bearing Cone for Race LM67010 Bearing Cone for Race 2520 Bearing Cone for Race M88010 Bearing Cone for Race LM48510 Bearing Cone for Race L68111 Bearing Cone for Race 2729 Bearing Cone for Race 25520 Bearing Cone for Race LM603011 Bearing Cone for Race 25523 Bearing Cone for Race JM205110 Bearing Cone for Race 28521 Bearing Cone for Race JLM506810 Bearing Cone for Race 28622 Bearing Cone for Race 382A Bearing Cone for Race 45220 Bearing Cone for Race JM511910 Bearing Cone for Race 3920 Bearing Cone for Race 39520 Bearing Cone for Race HM212011 Bearing Cone for Race LM501349 Bearing Cone for Race HM218210 Bearing Cone for Race 394A
Item #
7800051 7800046 7800046 7800055 7800056 7800057 7800045 7800058 7800049 7800041 7800050 7800054 7800080 7800033 7800044 7800048 7800082 7800053 7800052 7800039 7800042 7800086 7800075 7800078 7800074 7800005
Description 09194 Race for Bearing Cone 09067 LM11910 Race for Bearing Cone LM11949 1729 Race for Bearing Cone 1779 L44610 Race for Bearing Cone L44643 L44610 Race for Bearing Cone L44649 15245 Race for Bearing Cone 15123 14276 Race for Bearing Cone 14125A 02420 Race for Bearing Cone 02475 LM67010 Race for Bearing Cone LM67048 2520 Race for Bearing Cone 2585 M88010 Race for Bearing Cone M88048 LM48510 Race for Bearing Cone LM48548 L68111 Race for Bearing Cone L68149 2729 Race for Bearing Cone 2788 25520 Race for Bearing Cone 25580 LM603011 Race for Bearing Cone LM603049 25523 Race for Bearing Cone 25590 JM205110 Race for Bearing Cone JM205149 28521 Race for Bearing Cone 28580 JLM506810 Race for Bearing Cone JLM506849 28622 Race for Bearing Cone 28682 382A Race for Bearing Cone 387A 45220 Race for Bearing Cone 45290 JM511910 Race for Bearing Cone JM511946 3920 Race for Bearing Cone 3984 39520 Race for Bearing Cone 39590 HM212011 Race for Bearing Cone HM212049 LM501349 Race for Bearing Cone LM501310 MH218210 Race for Bearing Cone MH218248 394A Race for Bearing Cone 395S
Ref#
O.D. 1.938 1.781 2.240 1.980 1.980 2.441 2.717 2.688 2.328 2.750 2.688 2.563 2.362 3.000 3.265 3.063 3.265 3.543 3.265 3.543 3.844 2.810 4.125 4.331 4.438 4.438 4.813 1.625 5.786 4.331
Nev-R-Lube
Bearing Nev-R-Lube 35MM x 64MM x 37MM Bearing Nev-R-Lube 42MM x 76MM x 39MM Bearing Nev-R-Lube 50MM x 84MM x 54MM
WWW.TEXTRAIL.COM
7800059-01
7800071-01
WWW.TEXTRAIL.COM
Oil Caps
Description Oil Cap Kit with O-Ring & Plug 6K - 8K & 9K (Pre-10/1989) Oil Cap Kit with O-Ring & Plug 9K (Post-10/1989) - 15K 2-Piece H-D Oil Cap Kit with O-Ring & Plug 9K - 10K General Duty 1-Piece H-D Dexter Oil Cap 6K - 8K & 9K (Pre-10/1989) Dexter Oil Cap 9K (Post-10/1989) - 15K 2-Piece H-D Dexter Oil Cap 9K - 10KGD 1-Piece H-D Dexter Bolt-On Oil Cap with Vent plug 20K-25K Dexter O-Ring for Oil Cap 6K - 8K & 9K (Pre-10/1989) Dexter O-Ring for Oil Cap 9K (Post-10/1989) - 15K 2-Piece H-D Dexter O-Ring for Oil Cap 9K - 10KGD 1-Piece H-D Dexter Gasket for Bolt-On Oil Cap with Vent plug 20K-25K Dexter Plug for Oil Cap Dexter Oil Fill Hole Plug for 8K - 15K AL-KO Oil Cap Kit with O-Ring, Gasket & Plug 7K - 8K AL-KO Oil Cap Kit with O-Ring, Gasket & Plug 10KGD - 16K AL-KO Gasket for Oil Cap 8K AL-KO Gasket for Oil Cap 10KGD - 16K AL-KO Plug for Oil Cap 7K - 16K
Center Caps
Description Chrome Center Cap Open End with Chrome Plug Chrome Center Cap Open End with Chrome Plug Chrome Center Cap Open End with Chrome Plug Chrome Center Cap Open End with Chrome Plug Chrome Center Cap Open End with Chrome Plug Chrome Center Cap Open End with Chrome Plug Stainless Steel Center Cap Open End with Plug Stainless Steel Center Cap Open End with Plug Stainless Steel Center Cap Open End with Plug Stainless Steel Center Cap Open End with Plug Stainless Steel Center Cap Open End with Plug Replacement Chrome ABS Plug Replacement Black ABS Plug
A-91
Fits Pilot Hole Wheel Lugs
2.950" 3.190" 3.280" 4.250" 4.820" 5.120" 3.190" 3.280" 4.250" 4.820" 5.125"
4 4 5 5 or 6 8 8 5 5 5 or 6 8 8
WWW.TEXTRAIL.COM
A = Thread Diameter B = Stud Length C =Spline Length D =Base Length E = Spline Diameter
B
1.1875 2.00 2.50 2.50 1.81 2.375 3.25 2.75 3.00 3.16 3.00 1.84 2.30 2.30 1.80 2.50 1.64 2.50 2.75 2.09 3.94 4.79 2.50
C
0.38 0.38 0.63 0.68 0.26 0.65 0.58 0.79 0.58 0.56 0.43 0.39 0.31 0.31 0.26 0.56 0.36 0.71 0.31 0.40 0.63 0.63 0.56
D
0.52 0.52 1.10 1.38 0.52 0.85 1.40 0.97 0.80 1.00 1.46 0.73 1.06 0.77 0.62 1.42 0.52 1.15 1.00 0.72 1.25 1.25 1.06
E
0.545 0.545 0.618 0.540 0.540 0.610 0.670 0.650 0.680 0.690 0.810 0.610 0.690 0.690 0.545 0.545 0.617 0.690 0.690 0.617 0.970 0.970 0.689
A = Thread Diameter B = Overall Length C =Lug Nut End Length D = Hub End Length Double Threaded Ends Screw-In Wheel Studs
Description A B 7700097 25-53-1 Wheel Stud Yellow Zinc Grade 8 1/2 2.00 9/16 3.06 7700090 25-11 Wheel Stud Phosphate Coated Grade 8 7700110 25-45 Wheel Stud Phosphate Coated Grade 8 5/8 2.50 9/16 & 5/8 2.94 7700111 25-59 Wheel Stud Phosphate Coated Grade 8 1/2 2.53 6450242 25-14 Rotor Stud Phosphate Coated Grade 8 3/4 2.44 7700104 25-13-1 RH Wheel Stud Phosphate Coated Grade 8 3/4 2.44 7700103 25-13-2 LH Wheel Stud Phosphate Coated Grade 8 NOTE: 25-53-1 replaces obsolete 25-53
WWW.TEXTRAIL.COM
A-92
Part#
Ref #
C
0.7700 1.5625 1.3200 0.350 1.200 1.200
D
1.140 0.750 0.800 1.200 1.200 1.200
1/2"-20 Fine 1/2"-20 Fine 9/16"-18 Fine 9/16"-12 Coarse 5/8"-18 Fine 5/8"-11 Coarse 9/16"-18 Fine 5/8"-11 Coarse 1/2"-20 Fine 1/2"-13 Coarse 3/4"-16 Fine 3/4"-10 Coarse 3/4"-16 Fine 3/4"-10 Coarse
Ref #
7-40 LB509 7-84 7-36 363896
Description Screw-In Hex Head Wheel Bolt Grade 5 Zinc Screw-In Hex Head Wheel Bolt Grade 5 Zinc Screw-In Hex Head Wheel Bolt Grade 5 Zinc Screw-In Hex Head Wheel Bolt Grade 5 Zinc Screw-In Hex Head Wheel Bolt Grade 5 Zinc
A
1/2"-20 1/2"-20 9/16"-18 1/2"-13 1/2"-13
B
0.880 0.875 1.120 1.270 1.875
C
0.080 0.813 0.875 0.860 0.875
Thread
Fine Fine Fine Coarse Coarse
Type
60 Cone 90 Cone 90 Cone Flat Head Flat Head
Wheel Nuts
Part#
7700034 7700036 7700037 7700041 7700042 7700043 7700044 7700045 7700046 7700047 7700048 7700172 7700175 7700176 7700201 7700202 7700285 7700290 8200220
Ref #
6-58 6-53 STN569 6-70-1 6-70-2 6-98 1904 6-80 6-69-2 6-69-1 6-109 6-118 6-201 6-200 3010 1904L STN509 STN629 20405
Description Wheel Nut Wheel Nut Wheel Nut RH Outer Dual Cone Wheel Nut 0.88" Width x 1.50" OD LH Outer Dual Cone Wheel Nut 0.88" Width x 1.50" OD Capped Wheel Nut Acorn Hex Wheel Nut Wheel Nut LH Inner Dual Wheel Nut 3/4" Inner Thread / 1-1/8" Outer Thread RH Inner Dual Wheel Nut 3/4" Inner Thread / 1-1/8" Outer Thread Wheel Nut Wheel Nut 2-Piece Metric Torq-n-go Stainless Steel Capped Wheel Nut 2-Piece Zinc Plated Cone Torq-n-go Wheel Nut 2-Piece Acorn Duplex Hex Wheel Nut Acorn Hex Bulge 1.75" Long Wheel Nut Wheel Nut Wheel Nut Locking Wheel Nut with 3/4" Socket Key
Finish
Zinc Zinc Zinc Gold Zinc Gold Zinc Stainless Stl Chrome Zinc Yellow Zinc Yellow Zinc Zinc Hardened Alloy Zinc Zinc Chrome Chrome Zinc Zinc EC
Size
5/8"-18 9/16"-18 9/16"-18 1-1/8"-16 1-1/8"-16 1/2"-20 1/2"-20 1/2"-20 3/4"-16 3/4"-16 5/8"-18 M22x1.5-6 1/2"-20 1/2"-20 9/16"-18 1/2"-20 1/2"-20 5/8"-18 1/2"-20
Grade
8 5 5 5 5 5 5 5 5 5 8 5 5 5 5 5 5 5 8
Type
Flange 60 Cone 90 Cone Dual Whl Dual Whl 60 Cone 60 Cone 60 Cone Dual Whl Dual Whl 90 Cone Flange 60 Cone 60 Cone 60 Cone 60 Cone 90 Cone 90 Cone Locking Nut
Image
5 4 4 3 3 2 4 6 6 4 5 2 1
4 4 7
Part#
7700148 7700149 9000139 7700041 7700042 7700046
Ref #
25-56-1 25-56-2 6-47 6-70-1 6-70-2 6-69-2
2 Item #
ns ns ns ns
Description RH Screw-In Stud Phosphate Coated Grade 8 LH Screw-In Stud Phosphate Coated Grade 8 3/4"-16 Grade C Hex Lock Nut 0.88" Width x 1.12" OD RH Outer Dual Cone Wheel Nut 0.88" Width x 1.50" OD Gold Zinc LH Outer Dual Cone Wheel Nut 0.88" Width x 1.50" OD Gold Zinc LH Inner Dual Wheel Nut 3/4"-16 Inner Thread Yellow Zinc RH Inner Dual Wheel Nut 3/4"-16 Inner Thread Yellow Zinc Description Thread Dia 3/4" Flat Washer M22 x 1-1/2"-6 Wheel Nut 2-Piece Metric Flange Type Hardened Alloy M22 x 1-1/2"-6 Press-In Stud Phosphate Coated Grade 8 for Stl Whls M22 x 1-1/2"-6 Press-In Stud Phosphate Coated Grade 8 for Alum Whls
B 4.10 4.10
C 1.34 1.34
D 1.35 1.35
Base Lngth
Knurl Dia
3.94 4.79
0.63 0.63
1.25 1.25
0.970 0.970
WWW.TEXTRAIL.COM
A-93
Bearing Protectors
Description Bearing Protector 1.98" with Cap Bearing Protector 1.98" with Cap (2ea) Bearing Protector 2.441" Bearing Protector 2.717" Vinyl Cap for 1.980 Bearing Protector Vinyl Cap for 2.441 Bearing Protector Use On 3.5K 3.5K 5.2K 5.2K-7K 3.5K 5.2K 6-Bolt 8-Bolt
WWW.TEXTRAIL.COM
A-94
SUSPENSIONS
Table of Contents - Suspensions Single Axle Hanger Kits 2,000 lb - 7,000 lb 1.75" Double Eye Springs 2,000 lb - 8,000 lb 1.75" & 2" Slipper Springs 9,000 lb 2" Slipper Springs 10,000 lb General Duty 2-1/2" Slipper Spring 7/8" Eye Tandem Axle Hanger Kits 2,000 lb - 7,000 lb 1.75" Double Eye Springs 3,500 lb - 8,000 lb 2" Slipper Springs Combination Hanger Kits 3,500 lb - 8,000 lb 2" Slipper Springs Triple Axle Hanger Kits 2,000 lb - 7,000 lb 1.75" Double Eye Springs 3,500 lb - 8,000 lb 2" Slipper Springs 3,500 lb - 8,000 lb 2" Slipper Springs 9,000 lb 2" Slipper Springs 10,000 lb General Duty 2-1/2" Slipper Springs 7/8" Eye 10,000 lb General Duty 2-1/2" Slipper Springs 3/4" Eye (Wet) 10,000 lb General Duty 2-1/2" Slipper Springs 3/4" Eye (Dry) 10,000 lb Heavy Duty - 15,000 lb 3" Slipper Springs Heavy Duty Suspension System Air Suspension System Springs and Accessories Bushings Double Eye Springs Equalizers Hangers Marine U-Bolts Packaged U-Bolts Round U-Bolts Shackle Straps Slipper Springs Spring and U-Bolt Kits Springs Spring and U-Bolt Kits Double Eye Springs Slipper Springs Square U-Bolts Suspension Hardware Tie Bolts Tie Plates U-Bolt Hardware U-Bolt Kits
WWW.TEXTRAIL.COM
B-1
B-2 B-3 B-11 B-13 B-4 B-6 B-7 B-8 B-9 B-6 B-11 B-13 B-14 B-15 B-16 B-27 B-29 B-30 B-20 B-19 B-25 B-24 B-23 B-23 B-22 B-20 B-19 B-18 B-18 B-19 B-19 B-23 B-26 B-21 B-21 B-22 B-18
2010 Copyright by TexTrail, Inc.
SUSPENSIONS
SUSPENSIONS
Single Axle Double Eye Spring Hanger Kits
APS1 Item 1 2 3 4 5 Part # 9000122 9000127 9000164 9000147 9000030 APS2 Item 1 2 3 4 5 Part # 9000122 9000123 9000223 9000147 9000030 APS3 Item 1 2 3 4 5 Part # 9000122 9000123 9000164 9000147 9000030 APS4 Item 1 2 3 4 5 Part # 9000113 9000123 9000164 9000147 9000030 APS5 Item 1 2 3 4 5 Part # 9000113 9000127 9000164 9000147 9000030
9100063 Single Axle Hanger Kits - 1.75" Double Eye Springs (2K - 3.5K) Ref # Qty Description HR07F 2 Hanger 1.25" Center Hole to Top 30-20 2 Rear Hanger 0.91" Center Hole to Top w/ Bushing SL04B 4 Shackle Strap 3.125" Center Hole to Top 1.250" Wide 6-7 6 Shackle Nut 9/16-18 7-3 6 Shackle Bolt 9/16-18 x 3 9100116 Single Axle Hanger Kits - 1.75" Double Eye Springs (2K - 3.5K) Ref # Qty Description HR07F 2 Hanger 1.25" Center Hole to Top HR06F 2 Rear Hanger 1.187" Center Hole to Top SL16B 4 Shackle Strap 2.625" Center Hole to Top 1.250" Wide 6-7 6 Shackle Nut 9/16-18 7-3 6 Shackle Bolt 9/16-18 x 3 9100087 Single Axle Hanger Kits - 1.75" Double Eye Springs (2K - 7K) Ref # Qty Description HR07F 2 Hanger 1.25" Center Hole to Top HR06F 2 Rear Hanger 1.187" Center Hole to Top SL04B 4 Shackle Strap 3.125" Center Hole to Top 1.250" Wide 6-7 6 Shackle Nut 9/16-18 7-3 6 Shackle Bolt 9/16-18 x 3 9100071 Single Axle Hanger Kits - 1.75" Double Eye Springs (3.5K) Ref # Qty Description 28-5 2 Hanger 3.25" Center Hole to Top HR06F 2 Rear Hanger 1.187" Center Hole to Top SL04B 4 Shackle Strap 3.125" Center Hole to Top 1.250" Wide 6-7 6 Shackle Nut 9/16-18 7-3 6 Shackle Bolt 9/16-18 x 3 9100117 Single Axle Hanger Kits - 1.75" Double Eye Springs (3.5K) Ref # Qty Description 28-5 2 Hanger 3.25" Center Hole to Top 30-20 2 Rear Hanger 0.91" Center Hole to Top w/ Bushing SL04B 4 Shackle Strap 3.125" Center Hole to Top 1.250" Wide 6-7 6 Shackle Nut 9/16-18 7-3 6 Shackle Bolt 9/16-18 x 3
B-2
SUSPENSIONS
WWW.TEXTRAIL.COM
SUSPENSIONS
Single Axle Slipper Spring Hanger Kits
SUSPENSIONS
Item 1 2 3 4
APS3SE 9100007 Single Axle Hanger Kits - 1.75" Slipper Springs (2K - 3.5K) Part # Ref # Qty Description 9000122 HR07F 2 Hanger 1.25" Center Hole to Top 9000099 SH01B 2 Hanger C-Clip 9000030 7-3 2 Shackle Bolt 9/16"-18 x 3" 9000147 6-7 2 Shackle Nut 9/16"-18
9100018 Single Axle Hanger Kits - 2" Slipper Springs (2K - 8K) Ref # Qty Description HR22F 2 Front Slipper Hanger 3.625" Tall 4" HD HR23W 2 Rear Slipper Hanger 5" Tall 7-17 4 Shackle Bolt 9/16"-18 x 3.5" 6-7 4 Shackle Nut 9/16"-18
WWW.TEXTRAIL.COM
B-3
SUSPENSIONS
Tandem Axle Double Eye Spring Hanger Kits
SUSPENSIONS
APT1 Item 1&3 2 4 5 6 7 Part # 9000128 9000129 9000088 9000223 9000030 9000147 9000004 9000140 9000132 8750003 APT3 Item 1&3 2 4 5 6 7 Part # 9000128 9000122 9000090 9000223 9000030 9000147
9100064 Tandem Axle Hanger Kit - 1.75" Double Eye Springs (2K - 7K) Ref # Qty Description HR08F 4 Center Hanger 2.44" Center Hole 9/16" Hole 3.1" OAL HR34F 2 Center Hanger 5.438" Tall for 3/4" Bolt EQR83 2 Equalizer 8" Straight; 3/4" Center; 9/16" End Holes SL16B 8 Shackle Strap 2.625" Center Hole x 1.25" Wide 3.9" OAL 7-3 12 9/16"-18 x 3" Long Shackle Bolt 6-7 12 9/16"-18 Shackle Bolt Lock Nut 126A1LN 2 3/4"-16 x 3.50" Long Wet Equalizer Bolt 165093 2 3/4"-16 Equalizer Castle Nut 1610 2 Grease Zerk 1/8"-27 MPT 19-2 2 Cotter Pin 1/8" x 1.75" Long 9100041 Tandem Axle Hanger Kit - 1.75" Double Eye Springs (2K - 7K) Ref # Qty Description HR08F 2 Center Hanger 2.44" Center Hole 9/16" Hole 3.1" OAL HR07F 4 Hanger 1.25" Center Hole to Top E1 2 Equalizer 7.75" Curved X 2.875" Wide 9/16" Holes SL16B 8 Shackle Strap 2.625" Center Hole x 1.25" Wide 3.9" OAL 7-3 14 9/16"-18 x 3" Long Shackle Bolt 6-7 14 9/16"-18 Shackle Bolt Lock Nut
Item 1&3 2 4 5 6 7
APT3-HD 9100043 Tandem Axle Heavy Duty Hanger Kit - 1.75" Double Eye Springs (2K - 7K) Part # Ref # Qty Description 9000128 HR08F 4 Center Hanger 2.44" Center Hole 9/16" Hole 3.1" OAL 9000129 HR34F 2 Center Hanger 5.438" Tall for 3/4" Bolt 9000089 EQE34 2 Equalizer 7.75" Straight; 3/4" Center; 9/16" End Holes 9000223 SL16B 8 Shackle Strap 2.625" Center Hole x 1.25" Wide 3.9" OAL 9000030 7-3 12 9/16"-18 x 3" Long Shackle Bolt 9000147 6-7 12 9/16"-18 Shackle Bolt Lock Nut 9000004 126A1LN 2 3/4"-16 x 3.50" Long Wet Equalizer Bolt 9000140 165093 2 3/4"-16 Equalizer Castle Nut 9000132 1610 2 Grease Zerk 1/8"-27 MPT 8750003 19-2 2 Cotter Pin 1/8" x 1.75" Long
WWW.TEXTRAIL.COM
B-4
SUSPENSIONS
Tandem Axle Double Eye Spring Hanger Kits
SUSPENSIONS
APT4 Item 1&3 2 4 5 6 7 Part # 9000128 9000129 9000067 9000223 9000030 9000147 9000004 9000140 9000132 8750003 APT5 Item 1-3 4 5 6 7 Part # 9000113 9000090 9000223 9000030 9000147 APT5-LE Item 1-3 5 6 7 Part # 9000113 9000164 9000030 9000147 APT5-AS Item 1-3 4 5 6 7 Part # 9000113 9000090 9000163 9000030 9000147
9100060 Tandem Axle Hanger Kit - 1.75" Double Eye Springs (2K - 7K) Ref # Qty Description HR08F 4 Center Hanger 2.44" Center Hole 9/16" Hole 3.1" OAL HR34F 2 Center Hanger 5.438" Tall for 3/4" Bolt EQ458 2 Equalizer 6.25" Radius 3/4" Center; 9/16" End Holes SL16B 8 Shackle Strap 2.625" Center Hole x 1.25" Wide 3.9" OAL 7-3 12 9/16"-18 x 3" Long Shackle Bolt 6-7 12 9/16"-18 Shackle Bolt Lock Nut 126A1LN 2 3/4"-16 x 3.50" Long Wet Equalizer Bolt 165093 2 3/4"-16 Equalizer Castle Nut 1610 2 Grease Zerk 1/8"-27 MPT 19-2 2 Cotter Pin 1/8" x 1.75" Long 9100061 Tandem Axle Hanger Kit - 1.75" Double Eye Springs (2K - 7K) Ref # Qty Description HR03F 6 Hanger 3.25" Tall E1 2 Equalizer 7.75" Curved X 2.875" Wide 9/16" Holes SL16B 8 Shackle Strap 2.625" Center Hole x 1.25" Wide 3.9" OAL 7-3 14 9/16"-18 x 3" Long Shackle Bolt 6-7 14 9/16"-18 Shackle Bolt Lock Nut 9100061-03 Tandem Axle Hanger Kit - 1.75" Double Eye Springs (2K - 7K) Ref # Qty Description HR03F 6 Hanger 3.25" Tall SL04B 8 Shackle Strap 3.125" Center Hole x 1.25" Wide 4.405" OAL 7-3 14 9/16"-18 x 3" Long Shackle Bolt 6-7 14 9/16"-18 Shackle Bolt Lock Nut 9100061-04 Tandem Axle Hanger Kit - 1.75" Double Eye Springs (2K - 7K) Ref # Qty Description HR03F 6 Hanger 3.25" Tall E1 2 Equalizer 7.75" Curved X 2.875" Wide 9/16" Holes SL02B 8 Shackle Strap 2.25" Center Hole x 1.25" Wide 3.530" OAL 7-3 14 9/16"-18 x 3" Long Shackle Bolt 6-7 14 9/16"-18 Shackle Bolt Lock Nut
WWW.TEXTRAIL.COM
B-5
SUSPENSIONS
Tandem Axle Slipper Spring Hanger Kits
SUSPENSIONS
APT6SE-LD Item 1 2 3 4 5 6 7 8 ns Part # 9000105-02 9000106-02 9000100-02 9000272 9000031 9000147 9000017 9000146 8750003 APT6SE-MD Item 1 2 3 4 5 6 7 8 ns Part # 9000105 9000106 9000100 9000272 9000031 9000147 9000017 9000146 8750003 APT6SE-HD Item 1 2 3 4 5 6 7 8 ns Part # 9000105 9000106 9000100 9000070 9000031 9000147 9000017 9000146 8750003
9100073-04 Tandem Axle Hanger Kits - 2" Slipper Springs (3.5K - 8K) Ref # Qty Description HR25F 2 Front Slipper Hanger 3.625" Tall HR26W 2 Rear Slipper Hanger 5" Tall HR27F 2 Center Slipper Hanger 3.38" Tall E4541 2 Equalizer 2" Wide X 12" Long 717 8 9/16"-18 x 3.5" Shackle Bolt 6-7 8 9/16"-18 Shackle Bolt Lock Nut 7845B 2 7/8"-9 x 4.625" Long Wet Equalizer Bolt with Zerk & Cotter Hole 6-3 2 7/8"-9 Castle Nut 19-2 2 Cotter Pin 1/8" x 1.75" Long 9100073 Tandem Axle Hanger Kits - 2" Slipper Springs (3.5K - 8K) Ref # Qty Description HR22F 2 Front Slipper Hanger 3.625" Tall HR23W 2 Rear Slipper Hanger 5" Tall HR24F 2 Center Slipper Hanger 3.38" Tall E4541 2 Equalizer 2" Wide X 12" Long 717 8 9/16"-18 x 3.5" Shackle Bolt 6-7 8 9/16"-18 Shackle Bolt Lock Nut 7845B 2 7/8"-9 x 4.625" Long Wet Equalizer Bolt with Zerk & Cotter Hole 6-3 2 7/8"-9 Castle Nut 19-2 2 Cotter Pin 1/8" x 1.75" Long 9100020 Tandem Axle Hanger Kits - 2" Slipper Springs (3.5K - 8K) Ref # Qty Description HR22F 2 Front Slipper Hanger 3.625" Tall HR23W 2 Rear Slipper Hanger 5" Tall HR24F 2 Center Slipper Hanger 3.38" Tall E5541 2 Equalizer 2" Wide X 12" Long 717 8 9/16"-18 x 3.5" Shackle Bolt 6-7 8 9/16"-18 Shackle Bolt Lock Nut 7845B 2 7/8"-9 x 4.625" Long Wet Equalizer Bolt with Zerk & Cotter Hole 6-3 2 7/8"-9 Castle Nut 19-2 2 Cotter Pin 1/8" x 1.75" Long
B-6
WWW.TEXTRAIL.COM
SUSPENSIONS
Combination Slipper Spring Hanger Kits
SUSPENSIONS
H202-AP202 Item 1 2 3 4 5 6 7 8 9 10 Part # 9000291 9000290 9000292 9000094 9000020 9000143 9000031 9000147 9000016 9000145
9100119 Tandem Axle Hanger Kit - 2" Slipper Springs (3.5K - 8K) Ref # Qty Description 28-1 2 Front Slipper Hanger 4.88" Tall 4.25" Top to Center Hole 29-1 2 Center Slipper Hanger 4.5" Tall 3.5" Top to Center Hole 30-28 2 Rear Slipper Hanger 5.72" Tall 5.25" Top to Center Hole 5/16" 13-4 2 Equalizer Bullnose 33.5" Axle Spacing with Center Bushing 7-7 4 5/16"-18 x 3.25" Grade 2 Spring Retainer Bolt 6-11 4 5/16"-18 Spring Retainer Nut 7-17 4 9/16"-18 x 3.5" Shackle Bolt 6-7 4 9/16"-18 Shackle Bolt Lock Nut 7-1-1 2 7/8"-9 x 4.625" Long Wet Equalizer Bolt with Zerk less Cotter Hole 6-111 2 7/8"-9 Castle Nut HGR-202* Tandem Axle Hanger Kit - 2" Slipper Springs (3.5K - 7K) Ref # Qty Description 28-1 2 Front Slipper Hanger 4.88" Tall 4.25" Top to Center Hole 29-1 2 Center Slipper Hanger 4.5" Tall 3.5" Top to Center Hole 30-28 2 Rear Slipper Hanger 5.72" Tall 5.25" Top to Center Hole 5/16" HRG-238* Tandem Axle Hanger Kit - 2" Slipper Springs (7.2K - 8K) Ref # Qty Description 28-9-1 2 Front Slipper Hanger 5" Top to Center Hole 29-5-1 2 Center Slipper Hanger 4.5" Tall 3.5" Top to Center Hole 30-6-1 2 Rear Slipper Hanger 6.38" Top to Center Hole
Item 1 2 3
Item 1 2 3
Item 4 5 6 7 8 9 10
A/P-202* Tandem Axle Attaching Parts - 2" Slipper Springs (3.5K - 8K) 33.5" Axle Spacing Part # Ref # Qty Description 9000094 13-4 2 Equalizer Bullnose 13.125" OAL with Center Bushing 9000020 7-7 4 5/16"-18 x 3.25" Grade 2 Spring Retainer Bolt 9000143 6-11 4 5/16"-18 Spring Retainer Nut 9000031 7-17 4 9/16"-18 x 3.5" Shackle Bolt 9000147 6-7 4 9/16"-18 Shackle Bolt Lock Nut 9000016 7-1-1 2 7/8"-9 x 4.625" Long Wet Equalizer Bolt with Zerk less Cotter Hole 9000145 6-111 2 7/8"-9 Castle Nut A/P-216* Tandem Axle Attaching Parts - 2" Slipper Springs (3.5K - 8K) 36" Axle Spacing Part # Ref # Qty Description 9000092 13-44 2 Equalizer Bullnose 13.125" OAL with Center Bushing & Slipper Pad 9000020 7-7 4 5/16"-18 x 3.25" Grade 2 Spring Retainer Bolt 9000143 6-11 4 5/16"-18 Spring Retainer Nut 9000031 7-17 4 9/16"-18 x 3.5" Shackle Bolt 9000147 6-7 4 9/16"-18 Shackle Bolt Lock Nut 9000016 7-1-1 2 7/8"-9 x 4.625" Long Wet Equalizer Bolt with Zerk less Cotter Hole 9000145 6-111 2 7/8"-9 Castle Nut * HGR-202 or HGR 238 is to be used with A/P-202 or A/P-216 for a complete Hanger Kit
Item 4 5 6 7 8 9 10
WWW.TEXTRAIL.COM
B-7
SUSPENSIONS
Triple Axle Double Eye Spring Hanger Kits
SUSPENSIONS
APTT3 Item 1 2 3 4 5 6 Part # 9000090 9000113 9000122 9000223 9000030 9000147 APTT5 Item 1 2-3 4 5 6 Part # 9000090 9000113 9000164 9000030 9000147
9100016 Triple Axle Hanger Kit - 1.75" Double Eye Springs (2K - 7K) Ref # Qty Description E1 4 Equalizer Cast 2.875" Tall x 7.75" Long 9/16" Holes HR03F 4 Hanger 3" Top to Center Hole 3.625" Tall 9/16" Holes HR07F 4 Hanger 1.25" Top to Center Hole 2.010" Tall 9/16" Holes SL16B 16 Shackle Strap 2.625" Hole Centers 3.905" Tall x 1.25" W 9/16" Holes 7-3 24 9/16"-18 x 3" Shackle Bolt 6-7 24 9/16"-18 Shackle Lock Nut 9100017 Triple Axle Hanger Kit - 1.75" Double Eye Springs (2K - 7K) Ref # Qty Description E1 4 Equalizer Cast 2.875" Tall x 7.75" Long 9/16" Holes HR03F 8 Hanger 3" Top to Center Hole 3.625" Tall 9/16" Holes SL04B 16 Shackle Strap 3.125" Hole Centers 4.405" Tall x 1.25" W 9/16" Holes 7-3 24 9/16"-18 x 3" Shackle Bolt 6-7 24 9/16"-18 Shackle Lock Nut
WWW.TEXTRAIL.COM
B-8
SUSPENSIONS
Triple Axle Slipper Spring Hanger Kits
SUSPENSIONS
APTT6SE-LD
Item 1 2 3 4 5 6 7 8 ns Part # 9000272 9000105-02 9000106-02 9000100-02 9000017 9000146 9000031 9000147 8750003
9100021-04 Light Duty Triple Axle Hanger Kit - 2" Slipper Springs (3.5K - 8K)
Ref # E4541 HR25F HR26W HR27F 7845B 6-3 7-17 6-7 19-2 Qty 4 2 2 4 4 4 12 12 4 Description Equalizer 2.25" W x 12"L with Nylon Bushing Front Slipper Hanger 3.625" Tall Rear Slipper Hanger 5" Tall Center Slipper Hanger 3.38" Tall 7/8"-9 x 4.625" Long Wet Equalizer Bolt with Zerk & Cotter Hole 7/8"-9 Castle Nut 9/16"-18 x 3.5" Shackle Bolt 9/16"-18 Shackle Bolt Lock Nut Cotter Pin 1/8" x 1.75" Long
APTT6SE-MD 9100021-03 Medium Duty Triple Axle Hanger Kit - 2" Slipper Springs (3.5K - 8K)
Item 1 2 3 4 5 6 7 8 ns Part # 9000272 9000105 9000106 9000100 9000017 9000146 9000031 9000147 8750003 Ref # E4541 HR22F HR23W HR24F 7845B 6-3 7-17 6-7 19-2 Qty 4 2 2 4 4 4 12 12 4 Description Equalizer 2.25" W x 12"L with Nylon Bushing Front Slipper Hanger 3.625" Tall Rear Slipper Hanger 5" Tall Center Slipper Hanger 3.38" Tall 7/8"-9 x 4.625" Long Wet Equalizer Bolt with Zerk & Cotter Hole 7/8"-9 Castle Nut 9/16"-18 x 3.5" Shackle Bolt 9/16"-18 Shackle Bolt Lock Nut Cotter Pin 1/8" x 1.75" Long
APTT6SE-HD 9100021 Heavy Duty Triple Axle Hanger Kit - 2" Slipper Springs (3.5K - 8K)
Item 1 2 3 4 5 6 7 8 ns Part # 9000070 9000105 9000106 9000100 9000017 9000146 9000031 9000147 8750003 Ref # E5541 HR22F HR23W HR24F 7845B 6-3 7-17 6-7 19-2 Qty 4 2 2 4 4 4 12 12 4 Description Equalizer 2" W x 12"L Heavy Duty Front Slipper Hanger 3.625" Tall Rear Slipper Hanger 5" Tall Center Slipper Hanger 3.38" Tall 7/8"-9 x 4.625" Long Wet Equalizer Bolt with Zerk & Cotter Hole 7/8"-9 Castle Nut 9/16"-18 x 3.5" Shackle Bolt 9/16"-18 Shackle Bolt Lock Nut Cotter Pin 1/8" x 1.75" Long
B-9
WWW.TEXTRAIL.COM
SUSPENSIONS
3.5K - 8K 2 Slipper Spring Hanger Kits
SUSPENSIONS
HGR-302* Triple Axle Hanger Kit - 2" Slipper Springs (3.5K - 8K)
Item 1 2 3 Part # 9000291 9000290 9000292 Ref # 28-1 29-1 30-28 Qty 2 4 2 Description Front Slipper Hanger 4.88" Tall 4.25" Top to Center Hole x 2" Wide Center Slipper Hanger 4.50" Tall 3.50" Top to Center Hole x 2" Wide Rear Slipper Hanger 5.72" Tall 525" Top to Center Hole x 2" Wide
A/P-302* Triple Axle Attaching Parts - 2" Slipper Springs (3.5K - 8K) 33.5" Axle Spacing
Item 4 5 6 7 8 9 10 Part # 9000094 9000031 9000147 9000016 9000145 9000020 9000143 Ref # 13-4 7-17 6-7 7-1-1 6-111 7-7 6-11 Qty 4 6 6 4 4 6 6 Description Equalizer Bullnose 13.125" OAL with Center Bushing 9/16"-18 x 3.5" Shackle Bolt 9/16"-18 Shackle Bolt Lock Nut 7/8"-9 x 4.625" Long Wet Equalizer Bolt with Zerk Less Cotter Hole 7/8"-9 Grade B Castle Nut 5/16"-18 x 3.25" Grade 2 Spring Retainer Bolt 5/16"-18 Spring Retainer Nut
A/P-316* Triple Axle Attaching Parts - 2" Slipper Springs (3.5K - 8K) 36" Axle Spacing
Item 4 5 6 7 8 9 10 Part # 9000092 9000031 9000147 9000016 9000145 9000020 9000143 Ref # 13-44 7-17 6-7 7-1-1 6-111 7-7 6-11 Qty 4 6 6 4 4 6 6 Description Equalizer Bullnose 13.125" OAL with Central Bushing & Slipper Pad 9/16"-18 x 3.5" Shackle Bolt 9/16"-18 Shackle Bolt Lock Nut 7/8"-9 x 4.625" Long Wet Equalizer Bolt with Zerk Less Cotter Hole 7/8"-9 Grade B Castle Nut 5/16"-18 x 3.25" Grade 2 Spring Retainer Bolt 5/16"-18 Spring Retainer Nut
WWW.TEXTRAIL.COM
B-10
SUSPENSIONS
9K 2 Slipper Spring Hanger Kits
SUSPENSIONS
HAP-105-00
Item 1 2 5 6 ns ns Part # 9000120 9000118 9000021 9000020 9000144 9000143
HAP-205-01 9100008 Multi-Axle Hanger Kit - 2" Slipper Springs (9K) 38" Axle Spacing
Item 3 4 5 6 7 ns ns ns Part # 9000117 9000072 9000021 9000020 9000019 9000144 9000143 9000136 Ref # 29-39-4 13-117-3 7-181 7-7 7-182 6-38 6-11 6-112 Qty 2 2 2 2 2 2 2 2 Description Center Hanger 4.5" Tall Equalizer 2" Slipper Spring 38" Spacing with Rubber Bushing 5/8"-11 x 4" Grade 5 Spring Eye Bolt 5/16"-18 x 3.25" Grade 2 Spring Retainer Bolt 1"-8 x 5" Grade 5 Equalizer Center Bolt 5/8"-11 Grade B Spring Eye Hex Lock Nut 5/16"-18 Grade A Spring Retainer Hex Lock Nut 1"-8 Grade B Equalizer Hex Lock Nut
WWW.TEXTRAIL.COM
B-11
SUSPENSIONS
9K 2 Slipper Spring Hanger Kits Continued
SUSPENSIONS
HAP-205-02
Item 3 4 5 6 7 ns ns ns Part # 9000117 9000071 9000021 9000020 9000019 9000144 9000143 9000136
9100009 Multi-Axle Hanger Kit - 2" Slipper Springs (9K) 42.25" Axle Spacing
Ref # 29-39-4 13-118-3 7-181 7-7 7-182 6-38 6-11 6-112 Qty 2 2 2 2 2 2 2 2 Description Front Hanger 4.5" Tall Equalizer 2" Slipper Spring 42.25" Spacing with Rubber Bushing 5/8"-11 x 4" Grade 5 Spring Eye Bolt 5/16"-18 x 3.25" Grade 2 Spring Retainer Bolt 1"-8 x 5" Grade 5 Equalizer Center Bolt 5/8"-11 Grade B Spring Eye Hex Lock Nut 5/16"-18 Grade A Spring Retainer Hex Lock Nut 1"-8 Grade B Equalizer Hex Lock Nut
HAP-205-03
Item 3 4 5 6 7 ns ns ns Part # 9000117 9000073 9000021 9000020 9000019 9000144 9000143 9000136
9100010 Multi-Axle Hanger Kit - 2" Slipper Springs (9K) 48.50" Axle Spacing
Ref # 29-39-4 13-119-3 7-181 7-7 7-182 6-38 6-11 6-112 Qty 2 2 2 2 2 2 2 2 Description Front Hanger 4.5" Tall Equalizer 2" Slipper Spring 42.25" Spacing with Rubber Bushing 5/8"-11 x 4" Grade 5 Spring Eye Bolt 5/16"-18 x 3.25" Grade 2 Spring Retainer Bolt 1"-8 x 5" Grade 5 Equalizer Center Bolt 5/8"-11 Grade B Spring Eye Hex Lock Nut 5/16"-18 Grade A Spring Retainer Hex Lock Nut 1"-8 Grade B Equalizer Hex Lock Nut
WWW.TEXTRAIL.COM
SUSPENSIONS
10K GD 2-1/2 Slipper Spring Hanger Kits (7/8 Eye)
SUSPENSIONS
HAP-157-00 9100065 Single Axle Hanger Kit - 2-1/2" Slipper Springs 7/8" Eye Bolts (10K GD)
Item 1 1 2 5 ns Part # 9000265 9000264 9100072-02 9000034 9000145 Ref # 28-72-1 28-73-1 30-61-1 7-260-2 6-111 Qty 1 1 2 2 2 Description Left Hand Front Hanger 5.25" Tall 7/8" Eye Bolt Hole Right Hand Front Hanger 5.25" Tall 7/8" Eye Bolt Hole Rear Hanger 5-1/2" Tall 5/16" Bolt Hole 7/8"-9 x 4.5" Spring Eye Bolt with Zerk 7/8"-9 Grade B Spring Eye Hex Lock Nut
HAP-257-01 9100070 Multi-Axle Hanger Kit - 2-1/2" Slipper Springs (10K GD) 38" Axle Spacing
Item 3 4 4 5 ns 6 ns Part # 9000108 9000266 9000267 9000034 9000145 9000009 9000136 Ref # 29-33 13-132-2 13-132-2 7-260-2 6-111 7-136-2 6-112 Qty 2 1 1 2 2 2 2 Description Center Hanger 4.44" Tall Left Hand Equalizer 2-1/2" Slipper Spring 38" Spacing 7/8" Bolt Right Hand Equalizer 2-1/2" Slipper Spring 38" Spacing 7/8" Bolt 7/8"-9 x 4.5" Spring Eye Bolt with Zerk 7/8"-9 Grade B Spring Eye Hex Lock Nut 1"-8 x 5.25" Grade 5 Equalizer Center Bolt with Zerk 1"-8 Grade B Equalizer Hex Lock Nut
HAP-257-02 9100069 Multi-Axle Hanger Kit - 2-1/2" Slipper Springs (10K GD) 42.25" Axle Spacing
Item 3 4 4 5 ns 6 ns Part # 9000108 9000268 9000267 9000034 9000145 9000009 9000136 Ref # 29-33 13-134-2 13-135-2 7-260-2 6-111 7-136-2 6-112 Qty 2 1 1 2 2 2 2 Description Center Hanger 4.44" Tall Left Hand Equalizer 2-1/2" Slipper Spring 42.25" Spacing 7/8" Bolt Right Hand Equalizer 2-1/2" Slipper Spring 42.25" Spacing 7/8" Bolt 7/8"-9 x 4.5" Spring Eye Bolt with Zerk 7/8"-9 Grade B Spring Eye Hex Lock Nut 1"-8 x 5.25" Grade 5 Equalizer Center Bolt with Zerk 1"-8 Grade B Equalizer Hex Lock Nut
HAP-257-03 9100066 Multi-Axle Hanger Kit - 2-1/2" Slipper Springs (10K GD) 48.5" Axle Spacing
Item 3 4 4 5 ns 6 ns Part # 9000108 9000270 9000271 9000034 9000145 9000009 9000136 38 (1) 9100065 (1) 9100065 (1) 9100070 (1) 9100065 (2) 9100070 Ref # 29-33 13-136-2 13-137-2 7-260-2 6-111 7-136-2 6-112 42.25 (1) 9100065 (1) 9100065 (1) 9100069 (1) 9100065 (2) 9100069 Qty 2 1 1 2 2 2 2 48.50 (1) 9100065 (1) 9100065 (1) 9100066 (1) 9100065 (2) 9100066
B-13
Description Center Hanger 4.44" Tall Left Hand Equalizer 2-1/2" Slipper Spring 48.5" Spacing 7/8" Bolt Right Hand Equalizer 2-1/2" Slipper Spring 48.5" Spacing 7/8" Bolt 7/8"-9 x 4.5" Spring Eye Bolt with Zerk 7/8"-9 Grade B Spring Eye Hex Lock Nut 1"-8 x 5.25" Grade 5 Equalizer Center Bolt with Zerk 1"-8 Grade B Equalizer Hex Lock Nut
WWW.TEXTRAIL.COM
SUSPENSIONS
Wet - 10K GD 2-1/2 Slipper Spring Hanger Kits (3/4 Eye)
SUSPENSIONS
HAP-158-00 (WET) 9100121 Single Axle Hanger Kit - 2-1/2" Slipper Springs 3/4" Eye Bolts (10K GD)
Item 1 1 2 5 ns Part # 9000281 9000288 9000283 9000010 9000138 Ref # HR32FL HR32FR HR31W 7-135-2 6-113 Qty 1 1 2 2 2 Description LH Front Hanger 4.50" Tall 3/4" Eye Bolt Hole RH Front Hanger 4.50" Tall 3/4" Eye Bolt Hole Rear Hanger 4.50" Tall 3/4"-10 x 4.5" Spring Eye Bolt with Grease Zerk 3/4"-10 Grade B Spring Eye Hex Lock Nut
HAP-258-02 (WET) 9100122 Multi-Axle Hanger Kit - 2-1/2" Slipper Springs (10K GD) 42.25" Axle Spacing
Item 3 4 5 ns 6 ns Part # 9000286 9000383 9000384 9000010 9000138 9000009 9000136 Ref # HR33F EQ05LW EQ05RW 7-135-2 6-113 7-136-2 6-112 Qty 2 1 1 2 2 2 2 Description Center Hanger 5.875" Tall 1" Eye Hole LH Equalizer 2.50" Slipper Spring 42.25" Spacing 3/4" Bolt RH Equalizer 2.50" Slipper Spring 42.25" Spacing 3/4" Bolt 3/4"-10 x 4.5" Spring Eye Bolt with Grease Zerk 3/4"-10 Grade B Spring Eye Hex Lock Nut 1"-8 x 5.25" Grade 5 Equalizer Bolt with Grease Zerk 1"-8 Grade B Equalizer Hex Lock Nut
WWW.TEXTRAIL.COM
B-14
SUSPENSIONS
Dry - 10K GD 2-1/2 Slipper Spring Hanger Kits (3/4 Eye)
SUSPENSIONS
HAPD-158-00 (DRY) 9100072 Single Axle Hanger Kit - 2-1/2" Slipper Springs 3/4" Eye Bolts (10K GD)
Item 1 2 5 ns Part # 9100072-03 9100072-02 9000280 9000138 Ref # 28-74-2 30-61-1 7-264 6-113 Qty 2 2 2 2 Description Front Hanger 5.25" Tall 3/4" Eye Bolt Hole Rear Hanger 5.5" Tall 5/16" Bolt Hole 3/4"-10 x 4.5" Spring Eye Bolt 3/4"-10 Grade B Spring Eye Hex Lock Nut
HAP-258-01 (DRY) 9100089 Multi-Axle Hanger Kit - 2-1/2" Slipper Springs (10K GD) 38" Axle Spacing
Item 3 4 5 ns 6 ns Part # Ref # Qty Description 9100089-03 29-42-2 2 Center Hanger 4.50" Tall 9100089-02 13-139-3 2 Equalizer 2.50" Slipper Spring 38" Spacing 3/4" Bolt 9000280 7-264 2 3/4"-10 x 4.50" Spring Eye Bolt with Zerk 9000138 6-113 2 3/4"-10 Grade B Spring Eye Hex Lock Nut 9000013 7-169 2 1"-8 x 5.50" Grade 5 Equalizer Center Bolt 9000136 6-112 2 1"-8 Grade B Equalizer Hex Lock Nut HAPD-258-02 (DRY) 9100090 Multi-Axle Hanger Kit - 2-1/2" Slipper Springs (10K GD) 42.25" Axle Spacing Part # Ref # Qty Description 9100089-03 29-42-2 2 Center Hanger 4.50" Tall 9100090-02 13-140-3 2 Equalizer 2.50" Slipper Spring 42.25" Spacing 3/4" Bolt 9000280 7-264 2 3/4"-10 x 4.50" Spring Eye Bolt with Zerk 9000138 6-113 2 3/4"-10 Grade B Spring Eye Hex Lock Nut 9000013 7-169 2 1"-8 x 5.50" Grade 5 Equalizer Center Bolt 9000136 6-112 2 1"-8 Grade B Equalizer Hex Lock Nut
Item 3 4 5 ns 6 ns
HAP-258-03 (DRY) 9100091 Multi-Axle Hanger Kit - 2-1/2" Slipper Springs (10K GD) 48.5" Axle Spacing
Item 3 4 5 ns 6 ns Part # 9100089-03 9100091-02 9000280 9000138 9000013 9000136 38 (1) 9100072 (1) 9100072 (1) 9100089 (1) 9100072 (2) 9100089 Ref # 29-42-2 13-141-3 7-264 6-113 7-169 6-112 42.25 (1) 9100072 (1) 9100072 (1) 9100090 (1) 9100072 (2) 9100090 Qty 2 2 2 2 2 2 48.50 (1) 9100072 (1) 9100072 (1) 9100091 (1) 9100072 (2) 9100091
B-15
Description Center Hanger 4.50" Tall Equalizer 2.50" Slipper Spring 48.5" Spacing 3/4" Bolt 3/4"-10 x 4.50" Spring Eye Bolt with Zerk 3/4"-10 Grade B Spring Eye Hex Lock Nut 1"-8 x 5.50" Grade 5 Equalizer Center Bolt 1"-8 Grade B Equalizer Hex Lock Nut
WWW.TEXTRAIL.COM
SUSPENSIONS
10K HD - 15K 3 Slipper Spring Hanger Kits
SUSPENSIONS
9100012 Single Axle Hanger Kit - 3" Slipper Springs (10K - 15K) Ref # Qty Description 28-67-4 2 Front Hanger 6.25" Tall 30-66-1 2 Rear Hanger 6.63" Tall 7-95 2 1/2"-20 x 4.5" Grade 2 Spring Retainer Bolt 6-466 2 1/2"-20 Grade B Spring Retainer Hex Lock Nut 7-169 2 1"-8 x 5.5" Spring Eye Bolt 6-112 2 1"-8 Grade B Spring Eye Hex Lock Nut
Item 3 4 5 ns 6 ns 7 ns
HAP-203-01 9100006 Multi-Axle Hanger Kit - 3" Slipper Springs (10K -15K) 38" Axle Spacing Part # Ref # Qty Description 9000110 29-37-4 2 Reamed Center Hanger 4.45" Tall OR 9000296 29-43-2 2 Machined Center Hanger 4.12" Tall 9000083* 13-107-7 2 Equalizer 3" Slipper Spring 38" Spacing 9000014 7-95 2 1/2"-20 x 4.5" Grade 2 Spring Retainer Bolt 9000137 6-466 2 1/2"-20 Grade B Spring Retainer Hex Lock Nut 9000013 7-169 2 1"-8 x 5.5" Spring Eye Bolt 9000136 6-112 2 1"-8 Grade B Spring Eye Hex Lock Nut 9000012 7-170 2 1-1/8"-7 x 6" Equalizer Center Bolt 9000135 6-72 2 1-1/8"-7 Grade B Equalizer Hex Lock Nut HAP-203-02 9100055 Multi-Axle Hanger Kit - 3" Slipper Springs (10K -15K) 42.25" Axle Spacing Part # Ref # Qty Description 9000110 29-37-4 2 Reamed Center Hanger 4.45" Tall OR 9000296 29-43-2 2 Machined Center Hanger 4.12" Tall 9000082* 13-108-3 2 Equalizer 3" Slipper Spring 42.25" Spacing 9000014 7-95 2 1/2"-20 x 4.5" Grade 2 Spring Retainer Bolt 9000137 6-466 2 1/2"-20 Grade B Spring Retainer Hex Lock Nut 9000013 7-169 2 1"-8 x 5.5" Spring Eye Bolt 9000136 6-112 2 1"-8 Grade B Spring Eye Hex Lock Nut 9000012 7-170 2 1-1/8"-7 x 6" Equalizer Center Bolt 9000135 6-72 2 1-1/8"-7 Grade B Equalizer Hex Lock Nut
WWW.TEXTRAIL.COM
B-16
Item 3 4 5 ns 6 ns 7 ns
SUSPENSIONS
10K HD - 15K 3 Slipper Spring Hanger Kits Continued
SUSPENSIONS
Item 3 4 5 ns 6 ns 7 ns
HAP-203-03 9100005 Multi-Axle Hanger Kit - 3" Slipper Springs (10K -15K) 48.50" Axle Spacing Part # Ref # Qty Description 9000110 29-37-4 2 Reamed Center Hanger 4.45" Tall OR 9000296 29-43-2 2 Machined Center Hanger 4.12" Tall 9000085* 13-109-3 2 Equalizer 3" Slipper Spring 48.50" Spacing 9000014 7-95 2 1/2"-20 x 4.5" Grade 2 Spring Retainer Bolt 9000137 6-466 2 1/2"-20 Grade B Spring Retainer Hex Lock Nut 9000013 7-169 2 1"-8 x 5.5" Spring Eye Bolt 9000136 6-112 2 1"-8 Grade B Spring Eye Hex Lock Nut 9000012 7-170 2 1-1/8"-7 x 6" Equalizer Center Bolt 9000135 6-72 2 1-1/8"-7 Grade B Equalizer Hex Lock Nut * Check with sales representative about product details on left or right hand application. 10K - 15K Axle Assembly Spacing 38" 42.25 48.50 Single (1) 9100012 (1) 9100012 (1) 9100012 Tandem (1) 9100012 (1) 9100012 (1) 9100012 (1) 9100006 (1) 9100055 (1) 9100005 Triple (1) 9100012 (1) 9100012 (1) 9100012 (2) 9100006 (2) 9100055 (2) 9100005
WWW.TEXTRAIL.COM
B-17
SUSPENSIONS
Spring Kits with U-Bolts and U-Bolt Kits
SUSPENSIONS
2-3/8" Round 2-each Springs with U-Bolt Kit 2-3/8" Round 2-each Springs with U-Bolt Kit 3" Round 3" Round 3" Round 3" Round 3" Round 3" Round 5" Round 4" Round 2-each Springs with U-Bolt Kit 2-each Springs with U-Bolt Kit 2-each Springs with U-Bolt Kit 2-each Springs with U-Bolt Kit 2-each Springs with U-Bolt Kit 2-each Springs with U-Bolt Kit 2-each Springs with U-Bolt Kit 2-each Springs with U-Bolt Kit
WWW.TEXTRAIL.COM
B-18
SUSPENSIONS
SPRINGS
When selecting a replacement spring ensure that you get the measurements as indicated on the illustration for that spring type. Worn springs may represent a longer measurement than actually required in your new spring selection. Your TexTrail Sales Representative is available to assist you in your selection of replacement springs.
Double-Eye Springs
Part # 9150006 9150071 9150049 9150057 9150064 9150012 9150072 9150013 9150014 9150016 9150018 9150019 9150021 9150051 9150073 9150017 9150010 9150023 Ref # 1020 72-16 72-13 72-9 72-18 93180 75-6 SW3 SW4B SW4 SW5 72-40 SW6 72-25 SW722 SW626 SW427 SW627 Capacity 1,000 850 1,400 1,750 2,000 1,750 1,250 1,750 1,750 2,500 2,900 3,000 3,500 2,500 1,250 2,700 1,500 3,800 Leafs 3 3 4 3 4 3 3 3 4 4 5 1 6 4 3 6 4 6 A 20-3/8" 20-1/4" 20-1/2" 23-1/8" 23-1/8" 23-1/4" 23-1/8" 25-1/4" 25-1/4" 25-1/4" 25-1/4" 25-1/4" 24-7/8" 26" 25-1/8" 26-1/8" 27" 26-1/8" B 3-3/6" 3-3/16" 3-5/16" 3-1/2" 3-1/2" 3-1/8" 3-5/8" 3" 3" 3" 3" 3" 3" 3" 3-3/16" 3-3/4" 2-3/4" 3-3/4" C 10-3/16" 10-1/4" 10-1/4" 11-9/16" 11-9/16" 11-5/8" 11-9/16" 12-5/8" 12-5/8" 12-5/8" 12-5/8" 12-5/8" 12-5/8" 12-5/8" 12-9/16" 13-1/16" 13-1/2" 13-1/16" Eye Bolt 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" Description 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring for Mobile Home Use 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring
SUSPENSIONS
Slipper Springs
Part # 9150007 9150025 9150031 9150009 9150070 9150065 9150011 9150015 9150074 9150000 9150076 9150020 9150022 9150035 9150034 9150036 9150038 9150024 9150026 9150001 9150059 9150027 9150033 9150046 9150029 9150028 9150030 9150032 9150008 Ref # WH4 WIC2 WIE3 WI5 72-2 WID2 WIF3 WIG4 1003T3 1203T3 803T3 E5226 HW5116 93165 1403T3 72-51-1 72-51-2 E5115 E8536 72-10 72-10-2 72-21 72-80-1 72-77 93161A 72-43-1 72-44-1 72-45-1 354-00 Capacity 1,000 500 750 1,300 1,000 1,000 1,500 2,000 2,500 3,500 2,000 3,400 3,750 4,000 4,000 4,000 4,000 4,000 5,300 4,500 4,500 5,000 5,000 5,000 5,000 5,000 6,000 7,500 11,000 Leafs 4 2 3 5 2 2 3 4 4 5 4 5 6 7 7 7 7 6 8 6 6 5 5 5 5 5 6 7 3 A 24-1/4" 24-1/4" 24-1/4" 24-1/4" 27-1/2" 30-1/4" 30-1/4" 30-1/4" 27-3/4" 26-3/8" 26-1/2" 26-5/8" 26-1/2" 26-1/4" 26-1/8" 26-7/8" 26-7/8" 29-1/2" 29-1/2" 30" 30" 29-3/4" 29-3/4" 30" 32-1/2" 30-1/4" 30-1/4" 30-1/4" 43-3/4" B 23-1/8" 23-1/8" 23-1/8" 23-1/8" 24-3/4" 27-3/8" 27-3/8" 27-3/8" 24-7/8" 24-7/8" 24-7/8" 25-1/4" 25-1/8" 22-3/4" 24-7/8" 23-3/8" 23-3/8" 27-1/2" 27-1/2" 26-7/8" 26-7/8" 26-1/4" 26-1/4" 26-7/8" 29" 26-3/4" 26-3/4" 26-3/4" 40-5/8" C 4-1/8" 4" 4" 4-1/8" 4-3/16" 4-1/2" 4-1/2" 4-1/2" 3-1/16" 3-3/16" 3" 3-1/2" 3-1/2" 3" 3" 3" 3" 3-1/2" 3-1/8" 3-7/8" 3-7/8" 4" 4" 4" 4" 4" 4" 4" 3-3/16" D 11-1/16" 11" 11" 11-1/8" 12-7/16" 13-1/2" 13-1/2" 13-1/2" 11-3/16" 11-1/8" 11-3/16" 12" 12" 11-3/16" 11-3/16" 11-1/8" 11-1/8" 13-1/2" 13-1/2" 13-1/8" 13-1/8" 13-1/2" 13-1/2" 13-1/2" 14" 13-3/8" 13-3/8" 13-3/8" 22-1/2" Width 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 3" 3" 3" 3" Description Slipper Spring 9/16" Eye Slipper Spring 9/16" Eye Slipper Spring 9/16" Eye Slipper Spring 9/16" Eye Slipper Spring 9/16" Eye Slipper Spring 9/16" Eye Slipper Spring 9/16" Eye Slipper Spring 9/16" Eye Slipper Spring 9/16" Eye Slipper Spring 9/16" Eye Slipper Spring 9/16" Eye Hook End Slipper Spring 9/16" Eye Hook End Slipper Spring 9/16" Eye Slipper Spring Hook End Slipper Spring 9/16" Eye Hook End Slipper Spring 9/16" Eye Hook End Slipper Spring 5/8" Eye Hook End Slipper Spring 9/16" Eye Slipper Spring 9/16" Eye Slipper Spring Slipper Spring with 5/8" Steel Cased Rubber Bushing Slipper Spring 3/4" Eye Slipper Spring with 3/4" Rubber Eye Bushing Slipper Spring with 7/8" Brass Eye Bushing Slipper Spring with 3/4" Rubber Bushing Slipper Spring with 1" Rubber Bushing Slipper Spring with 1" Rubber Bushing Slipper Spring with 1" Rubber Bushing High Arch Slipper Spring
WWW.TEXTRAIL.COM
B-19
SUSPENSIONS
Suspension Bushings & Shackle Straps
Part # Ref # 9000049 14-51 9000042 14-67 9000273 14-111 9000052 71-291 9000045 721590 9000044 14-70 9000053 722109 9000038 14-1-1 9000039 14-64-1 9000054 722108 9000051 ENP605 9000040 14-54-1 9000043 14-69 9000055 091414 9000295 14-112 9000047 091413 9000041 14-73 9000038-01 TTBK100 9000039-01 TTBK200 9000054-01 TTBK300
ID 1" 3/4" 7/8" 9/16" 7/8" 1-1/8" 3/4" 9/16" 9/16" 9/16" 9/16" 9/16" 1" 1" 3/4" 3/4" 5/8" 9/16" 9/16" 9/16"
Suspension Bushings OD Length Description 1.25" 3" Bronze Spring Eye Bushing 1" 2-1/2" Bronze Spring Eye Bushing 1" 2-1/2" Bronze Spring Eye Bushing 11/16" 1-3/4" Bronze Equalizer / Spring Eye Bushing 1-1/16" 2-15/16" Nylon Equalizer Bushing 2-1/8" 3-3/4" Rubber / Steel Equalizer Bushing 7/8" 1-3/4" Nylon Equalizer Bushing 11/16" 1-3/4" Nylon Equalizer / Spring Eye Bushing 11/16" 2" Nylon Spring Eye Bushing 3/4" 1-3/4" Nylon Equalizer Bushing 7/8" 1-3/4" Nylon Spring Eye Bushing 1-5/16" 2-3/16" Nylon Spring Eye Bushing 2-1/16" 2-1/8" Rubber / Steel Sleeve Spring Eye Bushing 2-1/8" 4-1/16" Rubber / Steel Sleeve Equalizer Bushing 2" 2-5/8" Rubber / Steel Insert Spring Eye Bushing 1-3/4" 2-3/4" Rubber / Steel Sleeve Spring Eye Bushing 1-3/8" 2-3/16" Rubber / Steel Sleeve Spring Eye Bushing 11/16" 1-3/4" Nylon Equalizer / Spring Eye Bushing Kit (8-each) 11/16" 2" Nylon Spring Eye Bushing Kit (8-each) 3/4" 1-3/4" Nylon Equalizer Bushings Kit (6-each)
SUSPENSIONS
Part # Ref # 9000162 18-24-1 9000163 18-11 9000223 115052 9000164 115208 9000163-01 TTSK225 9000223-01 TTSK262 9000164-01 TTSK312
Shackle Straps Length Hole Size Description 3-3/4" 9/16" Shackle Strap 3-1/2" 9/16" Shackle Strap 3-7/8" 9/16" Shackle Strap 4-3/8" 9/16" Shackle Strap 3-1/2" 9/16" Shackle Strap Kit (4-each) 3-7/8" 9/16" Shackle Strap Kit (4-each) 4-3/8" 9/16" Shackle Strap Kit (4-each)
B-20
WWW.TEXTRAIL.COM
SUSPENSIONS
U-Bolt Axle Tie Plates and Bolts
SUSPENSIONS
Part # 9000203 9000205 9000208 9000209 Part # 9000204 9000206 9000207 9000297 9000212-02 9000212 9000210 9000213 9000214 9000215 9000216 9000217
Ref # 115983 116308 115585 117594 Ref # 117535 177858 117595 12-4 12-1-2 12-1 117521 117581 12-42 12-49 12-53 12-46
Use with Axle 1-1/2" 1-3/4" 2" 2" Use with Axle 1-3/4" 2-1/2" 2-3/8" 2-3/8" 3" 3" 3" 3-1/2" 4" 5" 5" 5"
Thickness
0.25"
U-Bolt Size 1/2" 9/16" 9/16" 9/16" U-Bolt Size 3/8" 9/16" 1/2" 1/2" 1/2" 1/2" 1/2" or 9/16" 9/16" or 5/8" 5/8" 5/8" 5/8" 3/4"
Description Tie Plate Tie Plate Tie Plate Tie Plate Description 2K Straight Tie Plate 7.2K Tie Plate 2K Drop / 3.5K Tie Plate 3.5K - 4.4K Tie Plate 3.5K -7.2K Zinc Tie Plate 3.5K -7.2K Tie Plate 3.5KHD - 7K Tie Plate 8K Tie Plate 9K Tie Plate 10K GD* / 10K** Tie Plate 10K HD* Tie Plate 12K - 15K* Tie Plate
WWW.TEXTRAIL.COM
B-21
SUSPENSIONS
Round U-Bolts & U-Bolt Hardware
Round U-Bolts
Part # 9000228 9000244 9000222 9000231 9000221 9000224 9000225 9000245 9000240 9000232 9000229 9000227 9000230 9000248 Part # 9100052-01 9100045-01 9100047-01 9100048-01 Part # 9100052 9100045 9100047 9100048 9100050 Part # 9000250 6450182 6450181 7030116 9000153 9000251 7700181 9000137 9000152 9000252 9000144 7030118 9000138 7030109 Ref # 11-54 11-21 11-22 11-74 11-49 11-17 11-18 176500 175667 11-65 11-64 11-70 11-77 091148 Ref # TTUBKR2K TTUBKR3K TTUBKR6K TTUBKR61K Ref # APUBR10 APUBR1 APUBR8 APUBR9 APUBR35 Ref # 33621 36156 36358 76124 12FHNP 12LWP 12FHFNP 6-129 916FHNP 916LWP 6-38 33630 6-113 76128 DIA 3/8" 1/2" 1/2" 7/16" 1/2" 1/2" 1/2" 9/16" 5/8" 9/16" 5/8" 3/4" 5/8" 5/8" DIA 3/8" 1/2" 1/2" 9/16" DIA 3/8" 1/2" 1/2" 9/16" 9/16" DIA 3/8" 3/8" 7/16" 7/16" 1/2" 1/2" 1/2" 1/2" 9/16" 9/16" 5/8" 5/8" 3/4" 3/4" Length 4" 5-1/2" 6-1/4" 5-1/8" 5-7/16" 6-5/8" 7-1/16" 7-1/2" 9" 7-13/16" 8-13/32" 9-5/8" 8-15/16" 10-1/2" Length 4" 5-1/2" 7" 7-1/2" Length 4" 5-1/2" 7" 7-1/2" 7-3/4" Use with 1-3/4" 2-3/8" 2-3/8" 2-3/8" 3" 3" 3" 3" 3-1/2" 3-1/2" 4" 5" 5" 5" Use with 1-3/4" 2-3/8" 3" 3" Use with 1-3/4" 2-3/8" 3" 3" 3-1/2" Description U-Bolt for 2K Round Axle Tubes U-Bolt for 3.5K Round Axle Tubes U-Bolt for 3.5K Round Axle Tubes U-Bolt for 3.5K Round Axle Tubes U-Bolt for 5.2K - 7K Round Axle Tubes U-Bolt for 5.2K - 7K Round Axle Tubes U-Bolt for 5.2K - 7K Round Axle Tubes U-Bolt for 5.2K - 7K Round Axle Tubes U-Bolt for 8K Round Axle Tubes U-Bolt for 8K Round Axle Tubes U-Bolt for 9K Round Axle Tubes U-Bolt for 12K & 15K Round Axle Tubes U-Bolt for 10K Round Axle Tubes (Dexter) U-Bolt for 10K Round Axle Tubes (Hayes/AL-KO) Description U-Bolt Kit for 2K Round Axle Tubes U-Bolt Kit for 3.5K Round Axle Tubes U-Bolt Kit for 5.2K - 7K Round Axle Tubes U-Bolt Kit for 5.2K - 7K Round Axle Tubes Description U-Bolt Kit for 2K Round Axle Tubes U-Bolt Kit for 3.5K Round Axle Tubes U-Bolt Kit for 5.2K - 7K Round Axle Tubes U-Bolt Kit for 5.2K - 7K Round Axle Tubes U-Bolt Kit for 8K Round Axle Tubes
SUSPENSIONS
U-Bolt Hardware
Description U-Bolt Lock Washer U-Bolt Nut U-Bolt Hex Nut U-Bolt Lock Washer U-Bolt Nut U-Bolt Lock Washer U-Bolt Flange Hex Nut U-Bolt Lock Nut U-Bolt Nut U-Bolt Lock Washer U-Bolt Lock Nut U-Bolt Lock Washer U-Bolt Lock Nut U-Bolt Lock Washer
B-22
WWW.TEXTRAIL.COM
SUSPENSIONS
Square Axle U-Bolts, Marine U-Bolts & Packaged U-Bolts
8270007 Double U-Bolt Bracket
SUSPENSIONS
Square U-Bolts
Length Use with Description 5" 1-3/4" Steel U-Bolt for 2K Square Axle Tube 3-1/2" 2" Zinc Plated U-Bolt for 2K - 3.5K Square Axle Tube 4-1/4" 2" Zinc Plated U-Bolt for 2K - 3.5K Square Axle Tube 5-1/2" 2" Steel U-Bolt for 2K - 3.5K Square Axle Tube 6-1/2" 2" Steel U-Bolt for 2K - 3.5K Square Axle Tube 4-1/2" 3" Stainless Steel U-Bolt for 5.2K - 6K Square Axle Tube Square U-Bolt Hardware See previous page
B-23
WWW.TEXTRAIL.COM
SUSPENSIONS
Hangers
SUSPENSIONS
WWW.TEXTRAIL.COM
B-24
SUSPENSIONS
Equalizers
Type 1
Type 2
A
8" 8" 6" 5-5/8" 7-3/4" 7-3/4" 6-1/4"
Type 3
Type 4
Type 5
Type 1 1 2 2 2 2 2 Type 3 Type 4 4 4 4 4 4 4
SUSPENSIONS
Cast Equalizers
Part #
9000091 9000088 9000066 9000065 9000090 9000089 9000067
Ref #
A2251B A2251B3 13-10 13-104-2 E1 E3 E4
B
4" 4" 4" 2" 2-7/8" 2-7/8" 2"
C
9/16" 9/16" 9/16" 9/16" 9/16" 3/4" 3/4"
D
9/16" 3/4" 9/16" 9/16" 9/16" 9/16" 9/16"
E
2-13/16" 3-7/8" 3-7/8" 3-1/8"
O.D.
1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4"
Description Straight Cast Equalizer 2K - 7K Straight Cast Equalizer Tall Cast Equalizer Cast Equalizer 2K - 7K Curved Cast Equalizer 2K - 7K Curved Cast Equalizer 2K - 7K Short Curved Cast Equalizer G
Part #
Ref #
Ref #
13-139-3 13-80-1 13-81-1
Spacing
38" 38" 38"
A
14-1/4" 14-1/4" 14-1/4"
E
1-3/8" 1-3/8" 1-3/8"
F
1" 1" 1"
G
3/4" 3/4" 3/4"
I.D.
2-3/4" 2-3/4" 2-3/4"
9000266 9000267 9100090-02 9000076 9000077 9000268 9000269 9100091-02 9000078 9000079 9000270 9000271 9000060 9000061 9000063 9000062 9000095 9000064 Part # 9000383 9000384 9000083 9000082 9000085
13-132-2 13-133-2 13-140-3 13-82-1 13-83-1 13-134-2 13-135-2 13-141-3 13-84-1 13-85-1 13-136-2 13-137-2 8327 8328 8319 8320 8315 8316 Ref # EQ05LW EQ05RW 13-107-7 13-108-3 13-109-3
38" 38" 42-1/4" 42-1/4" 42-1/4" 42-1/4" 42-1/4" 48-1/2" 48-1/2" 48-1/2" 48-1/2" 48-1/2" 42-1/4" 42-1/4" 42-1/4" 42-1/4" 48-1/4" 48-1/4" Spacing 42-1/4" 42-1/4" 38" 42-1/4" 48-1/2"
14-1/4" 14-1/4" 18-3/8" 18-3/8" 18-3/8" 18-3/8" 18-3/8" 24-1/2" 24-1/2" 24-1/2" 24-1/2" 24-1/2" 15-3/4" 15-3/4" 15-3/4" 15-3/4" 21-3/4" 21-3/4" A 18-1/2" 18-1/2" 14-1/4" 18-3/8" 24-3/4"
1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" B 7-3/4" 7-3/4" 4-1/2" 6-3/4" 10"
1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" C 7-1/16" 7-1/16" 5" 7-1/8" 10-3/8"
7/8" 7/8" 3/4" 3/4" 3/4" 7/8" 7/8" 3/4" 3/4" 3/4" 7/8" 7/8" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" D 1-1/4" 1-1/4" 1-1/8" 1-1/8" 1-1/8"
2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" E 1" 1" 1" 1" 1"
Description 10K General Duty Equalizer with bushing and slipper pad 10K General Duty LH Equalizer with bushing and slipper pad 10K General Duty RH Equalizer with bushing and slipper pad 10K General Duty LH Equalizer with bushing and slipper pad 10K General Duty RH Equalizer with bushing and slipper pad 10K General Duty Equalizer with bushing and slipper pad 10K General Duty LH Equalizer with bushing and slipper pad 10K General Duty RH Equalizer with bushing and slipper pad 10K General Duty LH Equalizer with bushing and slipper pad 10K General Duty RH Equalizer with bushing and slipper pad 10K General Duty Equalizer with bushing and slipper pad 10K General Duty LH Equalizer with bushing and slipper pad 10K General Duty RH Equalizer with bushing and slipper pad 10K General Duty LH Equalizer with bushing and slipper pad 10K General Duty RH Equalizer with bushing and slipper pad AL-KO/Hayes 9-16K LH Short Equalizer with bushings AL-KO/Hayes 9-16K RH Short Equalizer with bushings AL-KO/Hayes 9-16K LH Medium Equalizer with bushings AL-KO/Hayes 9-16K RH Medium Equalizer with bushings AL-KO/Hayes 9-16K LH Long Equalizer with bushings AL-KO/Hayes 9-16K RH Long Equalizer with bushings I.D. 3-1/8" 3-1/8" 3-1/8" 3-1/8" 3-1/8" Description 10K General Duty LH Equalizer with bushing 10K General Duty RH Equalizer with bushing 10K Heavy Duty Equalizer with rubber bushing 10K Heavy Duty Equalizer with rubber bushing 10K Heavy Duty Equalizer with rubber bushing
Type 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 Type 5 5 5 5 5
WWW.TEXTRAIL.COM
B-25
SUSPENSIONS
Suspension Hardware
Part # 9000030-01 9000031-01 Part # 9000018 9000004 9000010 9000034 9000017 9000016 9000009 9000020 9000014 9000030 9000031 9000023 9000008 9000011 9000021 9000280 9000019 9000013 9000012 9000140 9000146 9000142 9000137 7700181 9000143 9000147 9000145 9000144 9000139 9000149 9000138 9000135 9000148 9000136 9000153 6450182 6450181 9000152 9000250 7030116 9000251 9000252 7030118 7030109 Pins & Zerks Part # 8750003 9000096 9000132 8750004 Ref # TTBN916 TTBN917 Ref # 126B2LN 126A1LN 7-135-2 7-260-2 7-1 7-1-1 7-136-2 7-7 7-95 7-3 7-17 90722 5821 5819 7-181 7-264 7-182 7-169 7-170 90626 6-3 6-62 6-46 12FHFNP 6-11 6-7 6-111 6-38 6-47 6715 6-113 6-72 6716 6-112 12N 6-10 6-17 916N 38LW 5-8 5-58 916LW 76127 76128 Ref # 19-2 61-6 1610 61-7 Diameter 9/16"-18 9/16"-18 Diameter 9/16"-18 3/4"-16 3/4"-10 7/8"-9 7/8"-9 7/8"-9 1"-8 5/16"-18 1/2"-20 9/16"-18 9/16"-18 3/4"-16 3/4"-10 1"-8 5/8"-11 3/4"-10 1"-8 1"-8 1-1/8"-7 3/4"-16 7/8"-9 3/8"-24 1/2"20 1/2"-20 5/16"18 9/16"-18 7/8"-9 5/8"-11 3/4"-16 3/4"-10 3/4"-10 1-1/8"-7 1"-8 1"-8 1/2"-20 3/8"-24 7/16"-20 9/16"-18 3/8" 7/16" 1/2" 9/16" 5/8" 3/4" Diameter 1/8" 1/4"-27 1/4"-27 1/4"-28 Shackle Nut & Bolt Kits Length Description 3" Shackle Nut & Bolt Kit Quantity 4-each 3-1/2" Shackle Nut & Bolt Kit Quantity 4-each Bolts & Screws Length Description 3" Grease Zerk Bolt for Spring Eye 3-1/2" Grease Zerk Bolt less Grease Zerk 4-1/2" Grease Zerk Spring Eye Bolt 4-1/2" Grease Zerk Bolt for Spring Eye 4-5/8" Grease Zerk Bolt Grade 2 with Cotter Pin Hole 4-5/8" Grease Zerk Bolt Grade 2 without Cotter Pin Hole 5-1/4" Grease Zerk Bolt 3-1/4" Hex Head Bolt Grade 2 4-1/2" Hex Head Spring Retaining Bolt 3" Hex Head Shackle Bolt for 1-3/4" Springs 3-1/2" Hex Head Shackle Bolt for 2" Springs 3-1/2" Hex Head Bolt Black Oxide Grade 8 4-1/2" Hex Head Bolt Black Oxide Grade 8 5-7/8" Hex Head Bolt Black Oxide Grade 8 4" Hex Head Cap Screw Grade 5 4-1/2" Hex Head Cap Screw 5" Hex Head Cap Screw Grade 5 5-1/2" Hex Head Cap Screw Grade 5 6" Hex Head Cap Screw Grade 5 Nuts Castle Nut Grade 2 Black Oxide Castle Nut Grade 2 Flange Lock Nut Grade 5 Zinc Flange Lock Nut Grade B Serrated Plain Hex Flange Nut Grade 2 Hex Head Lock Nut Grade A Zinc Hex Head Lock Nut Hex Head Lock Nut Grade B Hex Head Lock Nut Grade B Zinc Hex Head Lock Nut Grade B Hex Head Lock Nut Grade 2 Black Oxide Hex Head Lock Nut Grade B Hex Head Lock Nut Grade B Hex Head Lock Nut Grade 2 Black Oxide Hex Head Lock Nut Grade B Hex Head Nut Hex Nut Grade 2 Zinc Hex Nut Grade 5 Zinc Hex Head Nut Washers Lock Washer Lock Washer Grade 5 Zinc Lock Washer Lock Washer Lock Washer Grade 5 Zinc Lock Washer Grade 5 Zinc Length 1-3/4" Description Cotter Pin Grease Zerk 65 Angle 1/8"-27 MPT Grease Zerk Straight 1/8"-27 MPT Grease Zerk Straight Thread Forming 0.20/235D Hole EZ-Lube
B-26
SUSPENSIONS
WWW.TEXTRAIL.COM
SUSPENSIONS
Heavy Duty Suspension System
SUSPENSIONS
The Hutch 9700 Series remains the leader in heavy duty trailer suspensions. Hutch incorporates innovative thinking resulting in a durable and reliable system that not only extends service life, reduces downtime and protects cargo but also provides a smooth and comfortable ride.
The Basis of any order must begin with a complete description of the unit. The following procedure will provide the descriptive information required: 1. Determine the number of axles required and the spacing of these axles. We stock hangers for tandem axles with 49 axle centers. 2. Select the style of hangers required to mount the suspension on your particular frame or subframe. Specify whether these hangers are to be fabricated (H) or cast (CH) steel. Fabricated hangers are in stock. 3. Determine the mounting height (Mtg/ht) your application requires. A Mounting Height Chart may be found on the next page. 4. Please note that mounting height is dependent upon: a) Suspension configuration Overslung or Underslung. Unless other-wise specified, suspension configuration is assumed to be overslung. b) Axle size - 5. c) Spring seat height 3/4 to 4 3/4 in 1/2 increments. d) Spring type Standard or Heavy-Duty, number of leaves and spring arch. 5. Choose which U-bolt size you would like (either the standard 7/8 or the optional 3/4 size).
WWW.TEXTRAIL.COM
B-27
SUSPENSIONS
Heavy Duty Suspension System Continued
NOTE: In many instances more than one combination will result in the same mounting height. Therefore, all of the aforementioned factors should be taken into consideration when ordering. Example: A tandem axle (T) 9700 Series suspension requiring a mounting of 16 and fabricated (H) under mount hangers (Un/mt) for use with 3/4 U-bolts and 5 round axles with 354-00 springs would be ordered as follows:
Quantity 1ea Hanger Type H Series Number Axle Config Hangers U-Bolts 5" Round Axles See Mounting Chart Springs 9700 T Un/mt 3/4" 5" rd 3/4" seat 354-00
SUSPENSIONS
WWW.TEXTRAIL.COM
B-28
SUSPENSIONS
Air Suspension System
SUSPENSIONS
Kit Includes: - Heavy Duty Compressor - Air Tank - Air Line - Fuse Block / Fuse - Fittings & Hardware *HCV must be purchased above
WWW.TEXTRAIL.COM
B-29
SUSPENSIONS
Air Suspension System
SUSPENSIONS
9100217 Quick Shot On-Board Air Compressor Kit 9100212 Wireless Digital Handheld Controller Unit 9100198 Air Lift for 2009 Chevy Silverado
WWW.TEXTRAIL.COM
Table of Contents - Tires & Wheels Center Caps Chrome Wheel Nuts C-6 C-5 C-5 C-6 C-5 C-5 C-6 C-8 C-8 C-5 C-8 C-5 C-6 C-6 C-7
Hub Caps Hub Covers Locking Lug Nuts Lug Wrench Simulators Tire & Wheel Assemblies Tires Valve Stems Wheel & Tire Assemblies Wheel Nuts Wheel Covers Wheel Simulators Wheels
WWW.TEXTRAIL.COM
C-1
ST ST
8 10 12 13 14 15 16
WWW.TEXTRAIL.COM
C-3
WWW.TEXTRAIL.COM
C-4
Part #
Ref #
TR600C TR600 TR801 TR413 501SW TR415 TR572 TR416 TR500
Type
1 1 1 2 3 4 5 6 7
Description 1
Valve Stem 0.453"DIA x 1.25"L Valve Stem 0.453"DIA x 1.25"L Valve Stem 0.625"DIA x 1.25"L Valve Stem 0.453"DIA x 1.25"L Valve Stem 0.625"DIA x 1.25"L Valve Stem 0.625"DIA x 1.25"L Valve Stem 0.625"DIA x 3.75"L Valve Stem 1.5"L Chrome Metal Valve Stem 0.625"DIA x 2"L
Ref #
405
Description
9420050
Telescoping Lug Wrench w/ 13/16", 7/8" & 17-18MM Dual Sockets 20" Cross Lug Wrench 17MM, 3/4" 13/16" & 7/8" with Bag
9420051
9420051
433
Description
1/2" Locking Wheel Nut with Key
8200220-01
Description
1/2" 60 Acorn Chrome Hex Wheel Nut 1/2" 60 Acorn Chrome Hex Wheel Nut Bulge 1.75" Long 9/16" 60 Acorn Chrome Duplex Hex Wheel Nut
Hub Caps
Part # 7600120 7600121 7600012 7600011 7600013 Ref # 1102 1302 1308 1306 1309 ID 7.66" 8.74" 9.23" 10.125" 11.563"
Description
Chrome Baby Moon Hub Cap Chrome Baby Moon Hub Cap Chrome Baby Moon Hub Cap Chrome Baby Moon Hub Cap Chrome Baby Moon Hub Cap
C-5
WWW.TEXTRAIL.COM
Part # 7600100 7600101 7600102 7600103 7600104 7600105 7600108 7600112 7600109 7600110 7600111 7600107 7600106
Ref # 295EZ 319EZ 328EZ 425EZ 482EZ 512EZ 319SS 328SS 425SS 482SS 512SS CCCP BCCP
Center Caps Description Chrome Center Cap Open End with Chrome Plug Chrome Center Cap Open End with Chrome Plug Chrome Center Cap Open End with Chrome Plug Chrome Center Cap Open End with Chrome Plug Chrome Center Cap Open End with Chrome Plug Chrome Center Cap Open End with Chrome Plug Stainless Steel Center Cap Open End with Plug Stainless Steel Center Cap Open End with Plug Stainless Steel Center Cap Open End with Plug Stainless Steel Center Cap Open End with Plug Stainless Steel Center Cap Open End with Plug Replacement Chrome ABS Plug Replacement Black ABS Plug
Fits Pilot Hole 2.950" 3.190" 3.280" 4.250" 4.820" 5.120" 3.190" 3.280" 4.250" 4.820" 5.125"
Wheel Lugs 4 4 5 5 or 6 8 8 5 5 5 or 6 8 8
Chrome Hub Covers Description ABS Chrome Hub Cover ABS Chrome Hub Cover ABS Chrome Hub Cover 13/16" Lug ABS Chrome Hub Cover 7/8" Lug Chrome Wheel Covers Part # Ref # Description 7600028 QT544CLO ABS Chrome Wheel Cover 7600029 QT545CLO ABS Chrome Wheel Cover 7600030 QT655CLO ABS Chrome Wheel Cover 13/16" Lug 7600031 QT6556CLO ABS Chrome Wheel Cover 7/8" Lug 7600032 QT865CLO ABS Chrome Wheel Cover 7/8" Lug Part # 7600025 7600023 7600024 7600018 Ref # QT545C QT655C QT765C QT865C
Wheel Lugs 545 655 865 865 Wheel Lugs 545 655 865 865 865
Stainless Steel Wheel Simulators Description Wheel Simulator - Single Wheel Truck / Trailer Set Wheel Simulator - Snap On Wheel Simulator - Bolt On Wheel Simulator - Piggy Back Wheel Simulator - Single Wheel Trailer Set Wheel Simulator - Piggy Back Wheel Simulator - Replacement Center Pop Out
C-6
Wheel Size 15" 16" 16" / 16-1/2" 16" / 16-1/2" 17-1/2" 17-1/2" -
WWW.TEXTRAIL.COM
Wheels
Part # 9700825 9700755 9700830 9700760 9700765 9700770 9700932 9700835 9700670 9700840 9700550 9700555 9700560 9700775 9700776 9700780 9700845 9700850 9700855 9700060 9700565 9700785 9700790 9700791 9700860 9700865 9700875 9700510 9700890 9700900 9700580 9700905 9700800 9700915 9700920 9700925 9700930 9700935 9700945 9700950 9700955 9700966 9700960 9700965 Ref #
345545WM1 460545SM1 460545WM1 550545SM1 550547SM1 550550SM1 550555SM1 550545WM1 550547WM1 550550WM1 CH1545 CH155 CH15655 560545SM2 560550SM1 560655SM1 560545WM1 560550WM1 560655WM1 CH166 CH168 660655SM1 660865SM1L 660865SM3 660655WM1 660865WM1 660865WM3 AL166
Center Cap 7600100 7600102 7600102 7600101 7600102 7600101 7600103 7600101 7600102 7600101 7600101 7600102 7600103 7600101 7600102 7600103 7600102 7600102 7600103 7600103 7600104 7600103 7600105 7600104 7600103 7600105 7600104 7600103 7600100 7600100 7600102 7600102 7600102 7600102 7600102 7600101 7600103 7600101 7600102 7600103 7600103 7600102 7600103 7600105
Diameter 13" 14" 14" 15" 15" 15" 15" 15" 15" 15" 15" 15" 15" 15" 15" 15" 15" 15" 15" 16" 16" 16" 16" 16" 16" 16" 16" 16" 12" 13" 14" 14" 15" 15" 15" 15" 15" 15" 15" 15" 15" 16" 16" 16"
Width 4-1/2" 6" 6" 5" 5" 5" 5" 5" 5" 5" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 7" 4" 4-1/2" 6" 6" 5" 5" 5" 5" 5" 6" 6" 6" 6" 6" 6" 6"
Capacity 1468 1869 1869 1870 1870 1870 1870 1870 1870 1870 2050 2050 2540 2600 2600 2600 2600 2150 2600 3000 3200 3500 3750 3960 3500 3750 3960 3200 1100 1468 1870 1869 1870 1870 1870 1870 1870 2600 2600 2150 2600 3750 3500 3750
Finish White Silver White Silver Silver Silver Silver White White White Chrome Chrome Chrome Silver Silver Silver White White White Chrome Chrome Silver Silver Silver White White White Aluminum White White Chrome White Silver White White White White White White White White Silver White White
Style Mod Mod Mod Mod Mod Mod Mod Mod Mod Mod Mod Mod Mod Mod Mod Mod Mod Mod Mod Mod Mod Mod Mod Mod Mod Mod Mod Mod Spoke Spoke Spoke Spoke Spoke Spoke Spoke Spoke Spoke Spoke Spoke Spoke Spoke Spoke Spoke Spoke
Pilot 2.99 3.27 3.27 3.19 3.31 3.19 4.25 3.19 3.31 3.19 3.19 3.31 4.25 3.19 3.31 4.25 3.31 3.31 4.25 4.25 4.88 4.25 5.12 4.88 4.25 5.12 4.88 4.25 2.95 2.99 3.27 3.27 3.27 3.31 3.31 3.19 4.25 3.19 3.31 4.25 4.25 3.27 4.25 5.12
Bolt Pattern 545 545 545 545 5475 550 555 545 5475 550 545 550 655 545 550 655 545 550 655 655 865 655 865 865 655 865 865 655 545 545 545 545 550 545 5475 550 555 545 550 555 655 865 655 865
Description Steel Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel Aluminum Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel Steel Wheel
Modular Wheels
Spoke Wheels
240545WS1 345545WS1 CH145S 460545WS1 550550SPS1 550545WS1 550547WS1 550550WS1 550555WS1 560545WS2 560550WS1 560555SWA 560655WS1 660865SSP1 660655WS1 66865WS569D
WWW.TEXTRAIL.COM
C-7
Tires
Description Tire ST20575R15C Trailer Tire Tire ST22575R15D Trailer Tire Tire ST23585R16E Trailer Tire
Bolt Pattern 440 440 440 545 545 545 440 545 440 545 440
Wheel Finish White White White White White White White White White White Almond
Wheel Type OEM OEM OEM OEM OEM OEM OEM OEM OEM OEM OEM
Description 5.70-8 Bias Ply 5.70-8 Bias Ply 5.70-8 Bias Ply 5.70-8 Bias Ply 5.70-8 Bias Ply 5.70-8 Bias Ply 4.80-8 Bias Ply 4.80-8 Bias Ply 4.80-8 Bias Ply 4.80-8 Bias Ply 18.5x8.5-8 Bias Ply
715 910 1075 715 910 1075 590 590 760 760 770
C B C C B C D E F
50 35 50 50 35 50 70 90 110
18.5x8.5-8 Bias Ply 18.5x8.5-8 Bias Ply 18.5x8.5-8 Bias Ply 20.5x8-10 Bias Ply 20.5x8-10 Bias Ply 20.5x8-10 Bias Ply 20.5x8-10 Bias Ply 20.5x8-10 Bias Ply 20.5x8-10 Radial Ply
WWW.TEXTRAIL.COM
C-8
WWW.TEXTRAIL.COM
C-9
16" & 17-1/2" Wheel & Tire Assemblies Part # 9400716 9400722 9400715 9400730 9400723 9400717 9400719 9400765 9400792 9400794 9400806 9400790 9400815 9400804 9400731 9400808 9400939 Ref # A16B6SM A16RTK6SM A16B6WM A16B6WS A16RTK477 A16DE488 A16R488TK A16B477 A16B8SM A16B8SM5 A16RTK8SM A16B8WM A16RTK8WM A16RTK8WM5 A16B8WS A16RTK8WS A215H/8H50 Load Range E E E E E E E E E E E E E E E E H H J H H J J J H 7600105 7600105 7600105 7600105 7600105 7600104 7600104 7600104 7600104 7600104 Center Cap 7600103 7600103 7600103 7600103 7600105 7600105 O.D. 31.4 30.79 31.4 31.4 30.79 30.71 30.79 31.4 31.4 31.4 30.79 31.4 30.79 30.79 31.4 30.79 30.2 30.2 31.4 30.2 30.2 31.4 31.4 31.4 30.2 S.W. 8.5 9.25 8.5 8.5 9.25 9.06 9.25 8.5 8.5 8.5 9.25 8.5 9.25 9.25 8.5 9.25 8.3 8.3 9.2 8.3 8.3 9.2 9.2 9.2 8.3 Wheel Size 16x6 16x6 16x6 16x6 16x6 16x6 16x6 16x6 16x6 16x6 16x6 16x6 16x6 16x6 16x6 16x6 17.5x6.5 17.5x6.5 17.5x6.75 17.5x6.75 17.5x6.75 17.5x6.75 17.5x6.75 17.5x6.75 17.5x6.75 Max Load Capacity 2755 3500 2755 2755 3080 3520 3080 2755 2755 2755 3520 2755 3520 3520 2755 3520 4540 4540 5675 4540 4540 5675 5675 5675 4540 Max PSI 75 80 75 75 80 80 80 75 75 75 80 75 80 80 75 80 123 123 127 123 123 127 127 127 123 Bolt Pattern 655 655 655 655 865 865 865 865 865 865 865 865 865 865 865 865 8-275 8-275 8-275 865 865 865 865 865 865 Wheel Finish Silver Silver White White Silver Silver Silver Silver Silver Silver Silver White White White White White White White White White White White Silver White White Wheel Type Mod Mod Mod Spoke Dual Dual Dual Dual Mod Mod Mod Mod Mod Mod Spoke Spoke Single Dual Dual Single Single Single Single Single Mod Description
750 x 16 Bias Ply LRE ST23580R16E 750 x 16 Bias Ply LRE 750 x 16 Bias Ply LRE 4.75 Pilot ST23580R16E 5.35 4.88 Pilot ST23580D16E 5.35 4.88 Pilot ST23580R16E 5.5 4.75 Pilot 750 x 16 Bias Ply LRE 750 x 16 Bias Ply LRE 750 x 16 Bias Ply LRE ST23580R16E 750 x 16 Bias Ply LRE ST23580R16E ST23580R16E 750 x 16 Bias Ply LRE ST23580R16E 17mm No HH 8.7 Pilot 4HH Solid Face Radial -0.19 Solid Face Radial No HH Solid Face Radial No HH Solid Face Radial No HH 0.05 Solid Face Radial 0.31 -0.47
9400936 A215H/17564WD 9400925 9400938 9400940 9400944 9400942 9400946 9400928 A235H/17564 A215/8H19 A215/8H31 A235J/8H19 A235J/8H50 A235J/8H31 A215H/175WM
Need help finding your correct parts? Call any of our 5 locations today!
East Texas 2424 W Ferguson Rd. Mt. Pleasant, TX 75455 888-756-0547 Fax(903)575-0568 West Texas 12506 West I-20 East Odessa, TX 79765 800-333-1745 Fax(432)563-1725 Florida 5181 North US Hwy 441 Ocala, FL 34475 800-259-8712 Fax(352)629-7134
C-10
WWW.TEXTRAIL.COM
J A C K S , CO U P L E R S & W I N C H E S
Table Of Contents - Jacks, Couplers & Winches Adjustable Clevis Adjustable Pintle Eye Adjustable Tongue Coupler A-Frame Coupler A-Frame Jack Agricultural & Industrial Winches Bolt-On Swivel Jack Coupler Latch Repair Kit Coupler Hardware Kit Direct Weld Swivel Jacks Draw Bar Dropleg Jack Dropleg Jack & Landing Gear Accessories Electric Winches EZ Jack Flat Mount Coupler Gooseneck Coupler Heavy Duty Jack Jack Repair Parts Jack Foot and Caster King Pin Landing Gear Marine Jack Nose Plate Retaining Ring Swivel Jack Pipe Mount Swivel Jack Round Tube Swivel Jack Power Jack Rack Post & Gearbox Scissor Jack Single Speed Winches Snap Ring Swivel Jack Square Tube Swivel Jack Stabilizer Jack Straight Tongue Coupler Superwinch Electric Winches Two Speed Winches Warn Electric Winches Wheel Chock Winch Strap
WWW.TEXTRAIL.COM
D-1
D-4 D-4 D-4 D-3 D-8 D-15 D-11 D-6 D-4 D-10 D-6 D-12 D-13 D-16 D-12 D-5 D-5 D-12 D-8 D-14 D-5 D-13 D-7 D-6 D-11 D-9 D-9 D-11 D-14 D-11 D-15 D-11 D-0 D-12 D-2 D-16 D-15 D-16 D-12 D-15
2010 Copyright by TexTrail, Inc.
J A C K S , CO U P L E R S & W I N C H E S
STRAIGHT TONGUE COUPLERS
6750524
6750523
6750020
6750045
6750055
6750022
Part# 6750522 6750041 6750521 6750556 6750043 6750558 6750207 6750042 Part# 6750524 6750045 6750552 6750523 6750560 6750526 6750554 6750525 6750044 6750562 6750528 6750046 6750550 6750019 6750527 6750564 6750020 6750529 6750530 Part# 6750060 6750055 6750023 6750022 6750063 6750059 Part# 6750028 6750026 6750029
Ref # CT-2001-O 940-1 CT-2001-Z 940-1Z 960-1 960-1Z 5105-24Z 970-1 Ref # CT-3001-O 22200 0500 981-2 CT-3001-Z 981-2Z CT-3002-O 982-2 CT-3002-Z 22250 0500 982-2Z CT-3003-O 22300 0500 980-2 80051 CT-3003-Z 980-2Z 80055 CT-5003-Z CT-5003-O Ref # 80082 2B2 80060 2B4 3B4 2B5 Ref # 4B2 80131 4B4
Tongue Size 2" 2" 2" 2" 2-1/2" 2-1/2" 2-1/2" 3" Tongue Size 2" 2" 2" 2" 2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 3" 3" 3" 3" 3" 3" 3" 3" 3" Tongue Size 2" 2-1/4" 3" 3" 3" 3-1/2" Tongue Size 2-1/4" 3" 3"
Finish Oily Oily Zinc Zinc Oily Zinc Zinc Oily Finish Oily Oily Oily Zinc Zinc Oily Oily Zinc Zinc Zinc Oily Oily Oily Painted Zinc Zinc Zinc Zinc Oily Finish Painted Painted Painted Painted Painted Painted Finish Painted Painted Painted
Capacity 2K 2K 2K 2K 2K 2K 2K 2K Capacity 3.5K 3.5K 2K 3.5K 3.5K 3.5K 3.5K 3.5K 3.5K 3.5K 3.5K 3.5K 3.5K 3.5K 3.5K 3.5K 3.5K 5K 5K Capacity 5K 5K 5K 5K 7K 5K Capacity 12.5K 8-1/2K 12.5K
D-2
Latch Low-Pro Quick-Lock Low-Pro Quick-Lock Quick-Lock Quick-Lock Quick-Lock Quick-Lock Latch Low-Pro Fas-Lok Quick-Lock Low-Pro Quick-Lock Low-Pro Quick-Lock Low-Pro Fas-Lok Quick-Lock Low-Pro Fas-Lok Quick-Lock Low-Pro Low-Pro Quick-Lock Low-Pro Low-Pro Low-Pro Latch Low-Pro High-Pro Low-Pro High-Pro High-Pro High-Pro Latch High-Pro Ring-Latch High-Pro
Collar Square Square Square Square Square Square Square Square Collar Square Square Square Square Square Square Square Square Square Square Square Square Square Square Square Square Square Square Square Collar Square Round Square Square Square Round Collar Round Square Square
Description Pacific Rim Dutton-Lainson Pacific Rim Dutton-Lainson Dutton-Lainson Dutton-Lainson Shebly Dutton-Lainson Description Pacific Rim Bulldog Dutton-Lainson Pacific Rim Dutton-Lainson Pacific Rim Dutton-Lainson Pacific Rim Bulldog Dutton-Lainson Pacific Rim Bulldog Dutton-Lainson Atwood Pacific Rim Dutton-Lainson Atwood Pacific Rim Pacific Rim Description Atwood Bulldog Collar-Lok Coupler Atwood Bulldog Collar-Lok Coupler Bulldog Collar-Lok Coupler Bulldog Collar-Lok Coupler Description Bulldog Collar-Lok Coupler Atwood Bulldog Collar-Lok Coupler
WWW.TEXTRAIL.COM
J A C K S , CO U P L E R S & W I N C H E S
A-FRAME COUPLERS
6750502
6750505
6750507
6750075
6750510
6750510
Part# 6750510 6750509 6750502 6750500 6750054 6750135 6750070 6750512 6750511 6750062 6750505 6750504 6750074 6750075 6750033 6750507 6750506 6750508 6750008 6750178
A
Ref # CA-5110-B CA-5110-O CA-5100-B CA-5100-O 80072 88555 43805W CA-5210-B CA-5210-O 80101 CA-5200-B CA-5200-O 81911 82680 81912 CA-5400-B CA-5400-O CA-5400-Z 44314R 44150W
Ball 2" 2" 2" 2" 2" 2" 2" 2" 2" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16"
Tongue Size 50 A-Frame 50 A-Frame 50 A-Frame 50 A-Frame 50 A-Frame 50 A-Frame 50 A-Frame 50 A-Frame 50 A-Frame 50 A-Frame 50 A-Frame 50 A-Frame 50 A-Frame 50 A-Frame 50 A-Frame 50 A-Frame 50 A-Frame 50 A-Frame 50 A-Frame 50 A-Frame
B
A-FRAME COUPLER Finish Capacity Blk Pwdr 2K Oily 2K Blk Pwdr 5K Oily 5K Painted 5K Painted 8K Primed 8K Blk Pwdr 8K Oily 8K Painted 7.5K Blk Pwdr 10K Oily 10K Painted 10K Painted 13K Painted 13K Blk Pwdr 14K Oily 14K Zinc 14K Painted 14K Primed 15K
Latch Yoke Yoke Flip Flip Yoke Flip Wedge Yoke Yoke Yoke Flip Flip Flip Flip Flip Flip Flip Flip Wedge Wedge
C
Type E E A A E B F E E E B B B D B C C C B F
Description Pacific Rim Pacific Rim Pacific Rim Pacific Rim Atwood Atwood Fulton Cast Pacific Rim Pacific Rim Atwood Pacific Rim Pacific Rim Atwood Atwood Under mount Atwood Pacific Rim Pacific Rim Pacific Rim Bulldog Fulton Cast
Part# 6750056 6750057 6750179 6750066 6750519 6750069 6750067 6750076 6750006 6750030 6750077
Ref # 2B8 2B8L 2A 3B8 CA-5190-B 3B8L 3B8L-LH 4B8 CA-5290-B 4B8L 4B8L-LH
Ball 2" 2" 2" 2" 2" 2" 2" 2-5/16" 2-5/16" 2-5/16" 2-5/16"
Forged Collar-Style A-Frame Couplers Tongue Size Finish Capacity Latch 50 A-Frame Primed 5K Hi-Pro 50 A-Frame Primed 5K Low-Pro 50 A-Frame Primed 5K Low-Pro 50 A-Frame Primed 7K Hi-Pro 50 A-Frame Blk Pwdr 7K Low-Pro 50 A-Frame Primed 7K Low-Pro 50 A-Frame Primed 7K Low-Pro 50 A-Frame Primed 12.5K Hi-Pro 50 A-Frame Blk Pwdr 12.5K Low-Pro 50 A-Frame Primed 12.5K Low-Pro 50 A-Frame Primed 12.5K Low-Pro
D-3
Type B A A B C A A B C A A
Description Bulldog Bulldog Bulldog Bulldog Pacific Rim Bulldog Bulldog Less Jack Hole Bulldog Pacific Rim Bulldog Bulldog Less Jack Hole
WWW.TEXTRAIL.COM
J A C K S , CO U P L E R S & W I N C H E S
Adjustable Couplers, Clevises & Pintle Eyes
6750061
6750027
6750193
6750010
6750563
8550027
8550050
Description Adjustable Pintle Eye with 4-hole Brkt Adjustable Pintle Eye with 6-hole Brkt Adjustable Pintle Ring / Drawbar Adjustable Pintle Ring / Drawbar Description Adjustable Clevis with 6-hole Brkt Adjustable Clevis with 4-hole Brkt Adjustable Clevis with 6-hole Brkt Adjustable Clevis Adjustable Clevis
WWW.TEXTRAIL.COM
D-4
J A C K S , CO U P L E R S & W I N C H E S
GOOSENECK COUPLERS
6750051
6750039
6750050
6750037
6750536
6750532
6750035
6750208
Part#
6750035 6750005 6750531 6750016 6750532 6750039 6750037 6750534 6750036 6750535 6750192 6750002 6750533 6750208 6750536 6750051 6750050 6750017 6750124 6750118
Ref #
287620300 GCPN-20000 GC-20000 287740300 GC-24000 LL2516ST GN24 GCPN-25000 289600300 GCSQ-25000 289500300 GCPN-30000 GC-30000 28900
GCSQTW-30000
Capacity
20K 20K 20K 20K 24K 25k 24K 25K 25K 25K 30K 30K 30K 30K 30K 30K 30K -
Type
Round Round Round Round Square Round Square Square Round Round Round Square Square Square -
Pin / Screw
No Pin Set Screws Set Screws Pin Pin Pin Pin Pin Pin Set Screws Pin Pin Pin -
Bulldog Gooseneck with Cap Pacific Rim Gooseneck 0.215" Thick with Pin Pacific Rim Gooseneck 0.215" Thick with Set Screws Bulldog Gooseneck Head Kit Pacific Rim Gooseneck 0.240" Thick with Set Screws TEMCO Gooseneck Autolock Top Wind with Pin Bulldog Gooseneck Head Kit Pacific Rim Gooseneck 0.240" Thick with Pin Bulldog Gooseneck with Pin Pacific Rim Gooseneck 0.240" Thick with Pin Bulldog Gooseneck with Pin Pacific Rim Gooseneck 0.300" Thick with Pin Pacific Rim Gooseneck 0.300" Thick with Set Screws Bulldog Gooseneck Top Wind with Pin Pacific Rim Gooseneck 0.275" Thick with Pin TEMCO Gooseneck Head Kit with K1 Manual Pin Lock TEMCO Gooseneck Top Wind TEMCO Gooseneck Jamb Nut Bulldog Gooseneck Set Screw TEMCO 1/2" Pin for Gooseneck Head
Ref #
GN5 15085 15086 15087
Size
4" 4" 4" 4-1/2"
Type
Round Round Square Square
Description
Gooseneck King Pin Adapter Gooseneck King Pin Adapter Gooseneck King Pin Adapter Gooseneck King Pin Adapter
Gooseneck Extender
Part#
6750206
Ref #
4200
I.D.
4"
Type
Round
Capacity Description
24K 10 Gooseneck Extender
Ref #
KP20038 KP20050
Size
2" 2"
Type
Weld-On Weld-On
Description
King Pin with 3/8" Bolster Plate King Pin with 1/2" Bolster Plate
Ref #
75074
Ball
2-5/16" 2-5/16"
Capacity Description
25K 14K
D-5
6750518 CTA-400PL
WWW.TEXTRAIL.COM
J A C K S , CO U P L E R S & W I N C H E S
DRAW BARS & NOSE PLATES
Draw Bars & Nose Plates Part# 8550004 8550006 8550047 8550008 Ref # BDB125015 BDB1385 BDB1394 BDB12503 Capacity 42K 60K 90K 15K 45K 10K Section 1-1/2" 1-5/8" 1-5/8" 1-1/2" 1-5/8" 1" Holes 4 4 4 8 8 I.D. 2-1/2" 3" 3" 2-1/2" 3" 2-1/2" Mounting Hole Size 25/32" 57/64" 21/32" 25/32" Finish Blk Pwdr Coat Blk Pwdr Coat Blk Pwdr Coat Plain Plain Plain Blk Pwdr Coat Blk Pwdr Coat Description Forged Drawbar Heavy Duty Forged Drawbar Heavy Duty Forged Drawbar Forged Alloy Steel Drawbar with Washer, Nut & Pin Forged Alloy Steel Drawbar with Washer, Nut & Pin C1020 Steel Forged Drawbar 3/4" Thick Trailer Nose Plate for 8550004 1" Thick Trailer Nose Plate for 8550006 & 8550047
Coupler Repair Parts Part# 6750098 7030047 6750114 6750111 6750015 * * * Ref # Description CT-3000-RK Pacific Rim 2" Straight Coupler Latch Repair Kit 24200 560801 600801 15775 88551 15774 Bulldog 2" & 2-5/16" Hi-Profile Coupler Repair Kit (includes handle, pin & retainer) Fulton Hand Wheel Coupler Repair Kit Fulton Fas-Lok 5K Coupler Repair Kit Atwood 2" Yoke Style Coupler Repair Kit Atwood 2" Coupler Repair Kit Atwood 2-5/16" Coupler Repair Kit
6750097 CA-5100-RK Pacific Rim 2" A-Frame Coupler Latch Repair Kit
WWW.TEXTRAIL.COM
D-6
J A C K S , CO U P L E R S & W I N C H E S
MARINE JACKS
7950231
7950232
7950519
7950038
7950266
7950084
7950228
7950518
7950229 141005 7950519 MJ1001B 7950515 MJ1200B 7950516 MJ1200BBX 7950038 XP10 7950084 XP15 7950228 XPD15L 7950266 MJ1500B 7950518 MJ1500BDWL 7950231 141302 7950232 141304 7950089 TJ503 7950083 87535
10" 10" 10" 10" 10" 12" 10" 12" 10" 10" 10" 10"
1 - 6" 1 - 6" 1 - 6" 1 - 6" 1 - 6" 1 - 8" 2- 6" 1 - 8" 2 - 6" 1 - 7" 1 - 7" 1 - 6" 1 - 6"
0.4K 1K 1.2K 1.2K 1.2K 1.5K 1.5K 1.5K 1.5K 1.6K 1.6K 0.8K 0.8K
Up to 3" x 5" Up to 3" x 5" Up to 3" x 5" Up to 3" x 5" Up to 3" x 5" Up to 3" x 5" Up to 3" x 5" Up to 3" x 5" Up to 3" x 5" 3" x 3" or 4" 3" x 3" or 4" Up to 3" x 5" Up to 3" x 5"
Fulton Swivel Trailer Stand Pacific Rim Swing Away Jack Pacific Rim Swing Away Jack Pacific Rim Swing Away Jack - Boxed Fulton Swing Away Jack Fulton HP Swivel Swing Away Jack Fulton HP Swivel Swing Away Jack Pacific Rim Swing Away Jack Pacific Rim Swing Away Jack Fulton F2 Series Jack Twin Track Fulton F2 Series Jack Wide Track Fulton S Series Marine Zinc Jack Atwood Zinc Jack less mounting bracket
7950556
7950539
Part#
Ref #
Travel
Clearance
19.25" 19" -
Caster
Capacity
Mounting
Description
Fulton Fixed Mount Jack No Hardware Pacific Rim Swing Away Jack Fulton Fixed Mount Heavy Duty Square Jack Pacific Rim Heavy Duty Square
WWW.TEXTRAIL.COM
D-7
J A C K S , CO U P L E R S & W I N C H E S
A-FRAME JACKS
Atwoods Heavy Duty Power Jack features a Ball Screw with recirculating ball bearing technology for more efficient and precise positioning.
7950159
7950109
7950056
7950210
7950061
7950497
7950501
7950503
Atwood's Heavy Duty Power Jack features a Ball Screw with recirculating ball bearing technology for more efficient and precise positioning. Retracted Extended Part# Ref # Capacity Travel Clearance Handle Finish Description Height Height Bulldog with removable steel 155300 1K 15" 12" 27" 17" Top Wind Primed 7950055 wheel* 7950039 7950040 7950045 7950159 7950061 7950057 7950043 7950054 7950056 7950188 7950195 7950222 7950019 7950193 7950210 7950497 7950501 7950502 7950503 7950504 7950505 7950239
80511
10" per minute 10" per minute 14" 15" per minute 14" 15" 14" 15" 15" 15" 15" 15" 15" 15" 15" 14" 14" 14" 14.50" 15" 14"
24.88" 24.88" 8.40" 24.88" 11.50" 9" 8.40" 7.50" 8.80" 5.40" 8.20" 11.90" 12.60" 10.30" 8.50" 20" 20" 20" 25" 23" 20"
39.25" 39.25" 22.40" 39.25" 25" 24" 22.40" 22.50" 23.80" 20.40" 23.20" 26.90" 27.60" 25.30" 24" 34" 34" 34" 39.50" 38" 34"
14.75" 14.75" 16.50" 14.75" 10.70" 13.20" 13" 17" 12.20" 16" 12.20" 19" 12.40" 10.20" 14" 12" 12" 15" 16" 14" 9.5"
Poly Cover / Atwood Standard 12V Power Jack Paint Atwood Deluxe 12V Power Jack Atwood less foot / caster Atwood Heavy Duty 12V Power Jack Atwood less foot / wheel Atwood less foot / wheel Fulton with wheel Bulldog with welded disc foot Bulldog less base / wheel* Bulldog less base / wheel* Bulldog less base / wheel* ** Bulldog with removable poly wheel* ** Eclipse less foot base Bulldog less base / wheel* Shelby less base / wheel Pacific Rim less base / wheel Pacific Rim less base / wheel Pacific Rim less base / wheel Pacific Rim less base / wheel Pacific Rim less base / wheel Pacific Rim less base / wheel Top Wind Crank for up to 5K Jacks - black
80515 87510 80530 80391 80401 155028 155100 155022 155033 155042** 155154** 175000 155032 5792Z TJA2000B TJA2000Z TJA2001B TJA2000S TJA2002B TJA5000B TJA2000HD
Override Poly Cover / Side Paint Side Wind Painted Override Poly Cover / Side Paint Top Wind Painted Top Wind Painted Top Wind Zinc Top Wind Primed Top Wind Primed Top Wind Primed Top Wind Primed Side Wind Top Wind Top Wind Side Wind Top Wind Top Wind Top Wind Side Wind Top Wind Top Wind Primed Painted Primed Zinc Powder Coated Zinc Powder Coated Powder Coated Powder Coated Powder Coated
J A C K S , CO U P L E R S & W I N C H E S
ROUND TUBE PIPE MOUNT SWIVEL JACKS
7950067
7950046
7950069
7950532
7950535
7950269
7950525
Round Tube Pipe Mount Swivel Jacks Retracted Extended Clearance * Handle Part# Ref # Capacity Travel Finish Pin Description Height Height 7950540 TJP2001SB 2K 10" 17.50" 28.50" *11.25" Side Wind Painted 9/16" With pipe end, foot plate & handle 7950044 158151 2K 15" 14.50" 29.50" 12.20" Side Wind Primed 9/16" With pipe end, foot plate & handle 7950048 158110 2K 15" 10.80" 20.80" 6.40" Side Wind Primed 9/16" With pipe end, foot plate & handle 7950046 158451 2K 10" 11" 21" 4" Top Wind Primed 9/16" With pipe end & red knob fold-away handle 7950525 TJP2001B 2K 10" 11.25" 15.25" *11.25" Top Wind Primed 9/16" With pipe end & red knob fold-away handle 7950050 158452 2K 15" 14.50" 29.50" 10" Top Wind Painted 9/16" With pipe end & red knob fold-away handle 7950527 TJP2002B 2K 15" 20.25" 35.25" *15" Top Wind Painted 9/16" With pipe end & red knob fold-away handle 7950066 178201 5K 10" 10.40" 20.40" 6.40" Side Wind Primed 5/8" With pipe end, foot plate & handle 7950532 TJP5001SB 5K 10" 17.50" 28.50" *11.25" Side Wind Painted 5/8" With pipe end, foot plate & handle 7950065 178203 5K 15" 15.40" 30.40" 6.40" Side Wind Primed 5/8" With pipe end, foot plate & handle 7950535 TJP5002SB 5K 15" 23.25" 38.25" *16.25" Side Wind Painted 5/8" With pipe end, foot plate & handle 7950064 178101 5K 10" 11.25" 21.25" 4" Top Wind Primed 9/16" With pipe end & red knob fold-away handle 7950530 TJP5001B 5K 10" 11.25" 15.25" *11.25" Top Wind Painted 9/16" With pipe end & red knob fold-away handle 7950067 82471 5K 10" 11" 21" 14.50" Top Wind Painted 7/8" Less pipe end. With foot plate & handle 7950069 178151 5K 15" 14.70" 29.70" 10" Top Wind Primed 9/16" With pipe end & red knob fold-away handle 7950533 TJP5002B 5K 15" 20.25" 35.25" *15" Top Wind Painted 9/16" With pipe end & red knob fold-away handle 7950079 198150 7K 10" 11" 21" 6.40" Side Wind Primed 5/8" With pipe end, foot plate & handle 7950541 TJP7001SB 7K 10" 18.50" 29..50" *11.50" Side Wind Painted 5/8" With pipe end, foot plate & handle 7950269 TJP7001SZ 7K 10" 18.50" 29.50" *11.50" Side Wind Zinc 5/8" With pipe end, foot plate & handle 7950080 198250 7K 15" 16" 31" 6.40" Side Wind Primed 5/8" With pipe end, foot plate & handle 7950081 198100 7K 10" 10.80" 20.80" 4.50" Top Wind Primed 9/16" With pipe end & red knob fold-away handle 7950078 198200 7K 15" 15.80" 30.80" 4.25" Top Wind Primed 9/16" With pipe end & red knob fold-away handle * Bracket height provided. In some cases height bracket differs from clearance height. Replacement Parts Part# Ref # Description
7950099 7950108 7950102
7950129-7950131 7950105
500180 500148 500171 500256 500105 500244 500245 JC101 017125 500238 500239 500240 82500 TJA2000HD TJPD-HD PLGPIN-12
Bulldog 150-160-170 Red Top Wind Jack Handle Bulldog 190 Black Top Wind Jack Handle Bulldog 190 Black Side Wind Jack Handle 0.85" RAD Bulldog Side Wind Handle & Gear Kit 0.8K, 1K & 5K Bulldog Black Side Wind Handle 0.8K - 5K 0.65" RAD Bulldog Detachable 5K Jack Foot Bulldog Detachable 0.8K Poly Jack Caster Pacific Rim Detachable 1.2K Poly Jack Caster Bulldog Detachable 1K Steel Jack Caster 5/8" Pin Weld-On Female Pipe Jack Mount 9/16" Pin Weld-On Male Pipe Jack Mount 5/8" Pin Weld-On Male Pipe Jack Mount 7/8" Pin Weld-On Male Pipe Jack Mount Pacific Rim Black Top Wind Jack Handle Pacific Rim Red Top Wind Jack Knob Pacific Rim 1/2" Swivel Jack Pin Kit
7950090
7950239
7950248
7950242
7950099
7950102
7950108
WWW.TEXTRAIL.COM
D-9
J A C K S , CO U P L E R S & W I N C H E S
SQUARE TUBE SWIVEL JACKS
7950253
7950077
7950271
7950236
7950237
7950181
Square Tube Round Pipe Mount Swivel Jacks Part# 7950249 7950236 7950253 7950237 7950271 Ref #
195306 TJDP-5000FLB 195356 TJDP-5000SFLB 190705
Capacity 5K 5K 5K 5K 8K
Description Round Mount Fixed Leg Jack with pipe end, foot plate & handle Round Mount Fixed Leg Jack with pipe end, foot plate & handle Round Mount Fixed Leg Jack with pipe end, foot plate & handle Round Mount Fixed Leg Jack with pipe end, foot plate & handle Round Mount Fixed Leg Jack with pipe end, foot plate & handle
Square Tube Square Pipe Mount Swivel Jacks Part# 7950254 7950258 Ref #
195312 195362
Capacity 5K 5K
Description Square Mount Fixed Leg Jack with pipe end, foot plate & handle Square Mount Fixed Leg Jack with pipe end, foot plate & handle
Direct Weld - Square Tube Square Pipe Mount Swivel Jacks Part# 7950077 7950076 7950238 7950543 7950181 7950182 Ref #
SWL190DL TWL190DL TJD5000 TJD5000S TJD7000 TJD7000S
Capacity 8K 8K 5K 5K 8K 8K
Clearance * -
Description Square Mount Drop Leg Jack with pipe end, foot plate & handle Square Mount Drop Leg Jack with pipe end, foot plate & handle Square Mount Drop Leg Jack with pipe end, foot plate & handle Square Mount Drop Leg Jack with pipe end, foot plate & handle Square Mount Drop Leg Jack with pipe end, foot plate & handle Square Mount Drop Leg Jack with pipe end, foot plate & handle
* Bracket height provided. In some cases height bracket differs from clearance height.
WWW.TEXTRAIL.COM
D-10
J A C K S , CO U P L E R S & W I N C H E S
JACKS CONTINUED
Weld-On Retaining Ring Swivel Jacks
Part# 7950047 Ref # 151401 151101 151421 171401 171412 Capacity 2K 2K 2K 5K 5K Travel 10" 10" 15" 10" 15" Retracted Height 11" 11" 14.50" 11.25" 14.50" Retracted Height 24.88" 24.88" 24.88" 24.88" Extended Height 21" 21" 29.50" 21.25" 29.50" Clearance 4" 6.40" 10" 4" 10" Handle Top Wind Side Wind Top Wind Top Wind Top Wind Finish Primed Primed Primed Primed Primed Pin 1/2" 1/2" 1/2" 1/2" 1/2" Description Weld-On Swivel Jack Weld-On Swivel Jack Weld-On Swivel Jack Weld-On Swivel Jack Weld-On Swivel Jack
7950063
Electric Jacks
Part# 7950158 7950039 7950040 7950159
7950159
Travel 10" per minute 10" per minute 10" per minute 15" per minute
Finish Poly Cover / Paint Poly Cover / Paint Poly Cover / Paint Poly Cover / Paint
Description Atwood Lightweight 12V Power Jack Atwood Standard 12V Power Jack Atwood Deluxe 12V Power Jack Atwood Heavy Duty 12V Power Jack
Atwood's Heavy Duty Power Jack features a Ball Screw with recirculating ball bearing technology for more efficient and precise positioning.
Retaining Ring and Bolt-On Side Wind Swivel Jacks - Up to 3" x 5" Mounting
Part# 7950229 7950089 7950083 7950515 Ref #
141005 TJ503 87535 MJ1200B
Travel 10" 10" 10" 10" 10" 10" 10" 12" 12" 10" 10" 10"
Retracted Height 14.5" 12.75" 7.80" 12.7" 12.7" 12.75" 12.75" 12.7" 12.75" 12.5" 12.7"
Extended Height 22.75" 18.10" 23.25" 23.25" 22.75" 22.75" 25.25" 24.75" 25.25" 23.25"
Capacity 0.4K 0.8K 0.8K 1.2K 1.2K 1.2K 1.5K 1.5K 1.5K 1.5K 1.6K 1.6K 1K
Description Fulton Swivel Trailer Stand Fulton S Series Marine Zinc Jack Atwood Zinc Jack less mounting bracket Pacific Rim Swing Away Jack Pacific Rim Swing Away Jack - Boxed Fulton Swing Away Jack Fulton HP Swivel Swing Away Jack Pacific Rim Swing Away Jack Fulton HP Swivel Swing Away Jack Pacific Rim Swing Away Jack Fulton F2 Series Jack Twin Track* Fulton F2 Series Jack Wide Track* Pacific Rim Swing Away Jack
1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 9/16" 9/16" 1/2"
1 - 6" 1 - 6" 1 - 6" 1 - 8" 1 - 8" 2- 6" 2 - 6" 1 - 7" 1 - 7" 1 - 6"
* Mounting options for this jack is 3" X 3" or 3" X 4" only.
Travel 21"
Capacity 5K
Description Hex Drive Forged Socket End Zinc Crank Black Rubber Grip Handle Weldable E-Coated RV Leveling Scissor Jack
7950801
This RV Leveling Scissor Jack provides a sandwich construction bearing design to assist in screw operation. Tooth gear design of the scissor arms ensures straight line vertical extension and retraction. Double lead thread drive engineering enables quick deployment of this jack.
WWW.TEXTRAIL.COM
D-11
J A C K S , CO U P L E R S & W I N C H E S
HEAVY DUTY JACKS
7950562
7950148
7950030
7950022
7950255
7950256
7950250
7950209
Heavy Duty Direct Weld Drop Leg Jacks - Non Spring Return
Part#
7950250 7950255 7950030 7950147 7950031 7950145 7950562 7950026 7950223 7950034
Ref #
LG8700-31 LGD700-21 182415 TJD-12000-FG2 182432 TJD-12000-RG2 TJD-12000TW-R 182301 182415H 182432H
Capacity
12K 20K 12K 12K 12K 12K 12K 12K 12K 12K
Lift
13.50" 12" 12.25" 12.25" 12.25" 12.25" 12.25" 12.25" 12.25" 12.25"
Retracted Height
24.38" 24.38" 28.60" 28.60" 27.40" 27.40" 23.50" 23.40" 28.60" 27.40"
Extended Height
49.87" 50.38" 54.60" 54.60" 43.30" 43.30" 49" 49.40" 54.60" 43.30"
Handle
Side Wind Side Wind Side Wind Side Wind Top Wind Side Wind Top Wind Top Wind Side Wind Side Wind
Handle Included
No No No Yes No Yes Yes Yes Yes Yes
Pin
Dual Dual Front Front Side Side Side Front Side
Description
Non-Spring Return Jack Non-Spring Return Jack Non-Spring Return Jack Non-Spring Return Jack Non-Spring Return Jack Non-Spring Return Jack Non-Spring Return Jack Non-Spring Return Jack Non-Spring Return Jack Kit Non-Spring Return Jack Kit
Ref #
DLPN20045SP-FG2
Capacity
12K 12K 20K 12K 12K 12K 12K 12K 12K
Lift
12.25" 13.50" 12" 12.25" 12.50" 12.50" 12.50" 12.25" 12.50"
Retracted Height
26.50" 24.38" 24.38" 28.60" 28.50" 27.40" 28.50" 28.60" 27.40"
Extended Height
38.75" 49.87" 50.38" 54.60" 54" 56.60" 54" 54.60" 56.60"
Handle
Side Wind Side Wind Side Wind Side Wind Side Wind Side Wind Side Wind Side Wind Side Wind
Handle Included
Yes No No No Yes No Yes Yes Yes
Pin
Dual Dual Dual Front Front Side Side Front Side
Description
Spring Return Jack Spring Return Jack Spring Return Jack Spring Return Jack Spring Return Jack Spring Return Jack Spring Return Jack Spring Return Jack Kit Spring Return Jack Kit
182800
TDJ-12000SP-RG2
182815H 182800H
Stabilizer Jack
Part#
7950023
Ref #
82301 80480
Capacity
0.65K
Lift
6"
Retracted Height
11.50"
Extended Height
17.75"
Description
Single Stabilizer Jack Stabilizer Handle
7950023 7950098
Wheel Chocks
Part#
7040013
7040013
Ref #
4121-8
4121-8-HD
Size
8" 8"
Eye
Yes No
Handle
No Yes
Description
Rumber Wheel Chock Rumber Wheel Chock
7040013 7040014
EZ Jack
Part#
9750001
9750001
Ref #
EZ-JACK
Capacity
20K
Finish
Aluminum
Description
Heavy Duty Cast EZ Jack
9750001
WWW.TEXTRAIL.COM
D-12
J A C K S , CO U P L E R S & W I N C H E S
HEAVY DUTY JACKS CONTINUED
7950041
7950042
7950213
7950241
Heavy Duty Direct Weld Drop Leg Jacks Part# 7950212 7950042 7950041 7950213 7950240 7950241 Ref # LG4700-30 LG4700-31 LG4700-32 LG4001-70 LG4001-71 LG4001-72 Static Load 50K 25K 25K 140K 70K 70K Lift Travel / Drop Capacity 25K 6.5K 25K 50K 50K 50K 13.50" / 12" 13.50" / 12" 13.50" / 12" 17" 17" 17" Retracted Height 29.87" 26.75" 26.75" 31.18" 31.18" 31.18" Handle Included Yes No No Yes No No Speed Set Single Two Set Single Two Description 51000 Landing Gear with Drop Section & Cross Pipe LH 51000 Landing Gear with Drop Section RH 51000 Landing Gear with Drop Section 51000 Landing Gear with Cross Pipe LH 51000 Landing Gear RH 51000 Landing Gear
Equalizer Systems Stop cranking and let Equalizer Systems do the work for you. Equalizer Systems is #1 in the Horse Trailer industry, providing the most advanced lifting systems around. 7950132 EL-PAC1 5K Single Power Lift System
The EL-PAC1 is the all-new unit designed for the Bulldog single speed and two speed jacks, as well as the Fulton single speed and Ram single speed jackleg. The El-Pac 1 is capable of lifting 5,000 lbs. of jack weight and is used on living quarter trailers up to 28' on the floor. This system lifts 8 inches per minute under full load.
7950133 EL-PAC2 6.5K Two Power Lift System
The EL-PAC2 is the all-new unit designed for the Binkley two-speed jack where
7950132
7950133
mounting space is limited. Requires 5 inches of width clearance to mount. Capable of lifting 6,500 lbs. of jack weight, and used on living quarter trailers up to 32' on the floor. This system lifts 8 inches per minute under full load.
Dropleg Jack & Landing Gear Accessories Part# 5350132 7950260 7950092 Ref # CP42 LG0094 Description Crosspipe 1"ID x 46"L x SC40 Crosspipe 1"OD x 68"L
LG0083-03 Jack Crank 12"L TJD1200C Crank Hanger Clip TJD1200H Jack Crank 13-1/2"
7950260
7950168
7950092
7950091
7950168 7950091
WWW.TEXTRAIL.COM
D-13
J A C K S , CO U P L E R S & W I N C H E S
7950261
7950119
7950018
7950070
7950163
7950074
7950071
Capacity 0.75K 0.75K 0.75K 0.75K 0.75K 0.75K 0.75K 0.75K Part# 7950129 7950130 7950021 7950131 7950226 7950099 7950102 7950108 7950096 7950090 7950013 7950105 7950157 7950097 7950168 5350132 7950260 7950092 7950091 7950244 7950509 7950508 7950510 7950075 7950247 7950248 7950243 7950239 7950513 7950512 7950248 7950242 7950113 7950114 7950016 7950514
7950157
7950114
7950105
7950108
7950099
7950239 7950092
Rack Posts and Gearboxes Type Application Description L-Bracket Weld-On Gear Box L-Bracket Bolt-On Gear Box A-Frame Weld / Bolt Gear Box L-Bracket Weld / Bolt Gear Box T Swivel Up To 3x5 Bolt-On Gear Box for Rectangular Tongue Rack Post with 6" Steel Wheel Rack Post with 6" Poly Wheel Rack Post with Disc Foot Jack Accessories Ref # Description 500238 5/8" Pin Weld-On Female Pipe Jack Mount 500240 5/8" Pin Weld-On Male Pipe Jack Mount 82500 7/8" Pin Weld-On Male Pipe Jack Mount 500239 9/16" Pin Weld-On Male Pipe Jack Mount TJD-7000-HD Bulldog & Pacific Rim Up to 8K Red Top Wind Jack Knob 500180 Bulldog 150-160-170 Red Top Wind Jack Handle 500171 Bulldog 190 Black Side Wind Jack Handle 0.85" RAD 500148 Bulldog 190 Black Top Wind Jack Handle 500105 Bulldog Black Side Wind Handle 0.8K - 5K 0.65" RAD 500245 Bulldog Detachable 0.8K Poly Jack Caster 017125 Bulldog Detachable 1K Steel Jack Caster 500244 Bulldog Detachable 5K Jack Foot 500178 Bulldog Pin Kit 1/2" for 150-160-170 Series Jacks 500256 Bulldog Side Wind Handle & Gear Kit 0.8K, 1K & 5K TJD1200C Crank Hanger Clip CP42 Crosspipe 1"ID x 46"L x SC40 LG0094 Crosspipe 1"OD x 68"L LG0083-03 Jack Crank 12"L TJD1200H Jack Crank 13-1/2" JF-99 Jack Foot Bolt-On for 2" Jacks JF-100-B Jack Foot with Hardware for 2" Jacks 1.7" Tall JF-100-Z Jack Foot with Hardware for 2" Jacks 1.7" Tall Zinc JF-101 Jack Foot with Hardware for 2" Jacks 8.5" Tall TJD-7000-FT Jack Leg for 7K Jacks MJ-1000B-MBB Marine Jack Mounting Kit PLGPIN-12 Pacific Rim 1/2" Swivel Jack Pin Kit MJ-1000B-WL Pacific Rim Black 6" Poly Wheel with Nut, Bolt & Spacer TJA2000HD Pacific Rim Black Top Wind Jack Handle JC-102 Pacific Rim Detachable 1.2K Poly Jack Caster JC101 Pacific Rim Detachable 1.2K Poly Jack Caster PLGPIN-12 Pacific Rim Pin Kit 1/2" for Swivel Jacks TJPD-HD Pacific Rim Red Top Wind Jack Knob 500231 Pull Pin 5/8" x 3.5" with Chain for Bulldog 170 Series Side Wind Jacks 500232 Pull Pin 5/8" x 4.25" with Chain for Bulldog 190 Series Jacks Pull Pin 9/16" X 3.5" with Chain for Pacific Rim Pipe Mount and Bulldog 150 & 170 Series Top Wind Jacks 500243 JSP-100 Support Plate for 2K & 5K Jacks 2.29" Hole
D-14
WWW.TEXTRAIL.COM
J A C K S , CO U P L E R S & W I N C H E S
WINCHES
Capacity
0.6K 1.5K 1.8K
Gear
Ratio 3.1:1 4.1:1 5.1:1
Ratchet
Drum Capacity
Strap 15' x 2" 20' x 2" 20' x 2"
Strap / Rope
Included No No No
Handle
Length 6" 8" Fulton
Description
Fulton S Series Hand Winch Fulton S Series Hand Winch Fulton S Series Hand Winch
Style Rope Two-Way 36' x 1/4" Two-Way 30' x 5/16" Two-Way 20' x 7/16"
Ratchet
Style
Two-Way with Neutral Auto Brake
Drum Capacity
Rope 20' x 7/16" N/A Strap N/A N/A Cable
N/A 70' x 1/4"
Strap / Rope /
Cable Included
No No
Handle
Length 10" 11" 10" 10" 10"
Description
5.1:1 & Two-Way N/A No N/A 12.2:1 with Neutral 24' x 7/16" 5.1:1 & 100' x Two-Way No N/A N/A 7/32" 12.2:1 with Neutral 5.1:1 & 100' x Two-Way No N/A N/A 7/32" 12.2:1 with Neutral 2" x 12' Winch Strap with Hook and Loop Nylon Fulton (Pkg 6-each) 2" x 20' Winch Strap and Hook Nylon Web Fulton
Fulton High Performance Series Hand Winch Fulton High Performance Series Hand Winch with Auto Brake Fulton High Performance Series Hand Winch Fulton High Performance Series Hand Winch with Hand Brake Fulton High Performance Series Hand Winch
Marine U-Bolts
8270007
Part #
9000507 9000508 9000509 9000501 9000502 9000503 9000504 9000289 9000510 9000505 9000506 9000511 9000500
Stainless Steel, Galvanized & Yellow Zinc Plated Marine U-Bolts Ref # DIA Length Use with Description
US1201405S US1201505S US1201605S US1201405G US1201505G US1201605G US1301405G UB345120SS US1301505S US1301505G US1301605G UB337812SS US1301405Y
Part #
8270007 8270008
1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2"
4-5/16" 5-5/16" 6-5/16" 4-5/16" 5-5/16" 6-5/16" 4-5/16 4-1/2" 5-5/16" 5-5/16" 6-5/16" 3-7/8" 4-5/16"
2" 2" 2" 2" 2" 2" 2" 3" 3" 3" 3" 3" 3"
Stainless Steel Square U-Bolt Stainless Steel Square U-Bolt Stainless Steel Square U-Bolt Galvanized Square U-Bolt Galvanized Square U-Bolt Galvanized Square U-Bolt Galvanized Square U-Bolt Stainless Steel Square U-Bolt Stainless Steel Square U-Bolt Galvanized Square U-Bolt Galvanized Square U-Bolt Yellow Zinc Square U-Bolt Yellow Zinc Square U-Bolt
Galvanized Double U-Bolt Bracket 8-3/4"H x 4" W Galvanized Double U-Bolt Bracket 9-3/4"H x 4" W
Ref #
12CHN188SS 12LW188SS 12CHNG 12LWHDG 12CHNYZ 12LWYZ
Description
1/2" Stainless Steel Hex Nut 1/2" Stainless Steel Lock Washer 1/2" Galvanized Hex Nut 1/2" Galvanized Lock Washer 1/2" Yellow Zinc Hex Nut 1/2" Yellow Zinc Lock Washer
WWW.TEXTRAIL.COM
D-15
J A C K S , CO U P L E R S & W I N C H E S
ELECTRIC WINCHES
WWW.TEXTRAIL.COM
D-16
TO W I N G
Table Of Contents - Towing Aluminum Ball Mounts Adjustable Clevis Adjustable Tow Bar Adapter Sleeves Adapter for Receiver Tube Back-Up Assist Camera Balls Ball Mounts B&W Gooseneck Hitches B&W Adjustable Receiver / Pintle Hitch B&W RV 5th Wheel B&W Tow & Stow Receiver Hitches Bolt-On Receiver Hitches Brackets (Channel & Adjustable) Bumper Receiver Hitches Cargo Carrier Platforms Combination Pintle Hitch Convert-A-Ball Cushioned Ball Mounts Double Ball Mount Drop Hitches Extender for Receiver Tube Fifth Wheel Hitches Folding Gooseneck Hitch Balls Gooseneck Channels Gooseneck Hitch Plates Gooseneck Hitches Heavy Duty Ball Mounts Hitch Balls Holland Mini Fifth Wheel Interchangeable Hitch Balls King Pins Mounting Rails (Folding Ball) Mounting Rails (5th Wheels) Pintle Hooks Pintle Mounts Rapid Hitch Ball Mounts Receiver Accessories Receiver Ball Mounts Receiver Locks Receiver Tubes Receiver Tube Cover RV 5th Wheels RV Towing Hitch Smooth Shank Hitch Balls Specialty Ball Mounts TexTrail Packaged Towing Products Triple Ball Mount Weight Distribution Hitches
WWW.TEXTRAIL.COM
E-1
E-6 E-6 E-9 E-4 E-4 E-7 E-7 E-4 E-12 E-6 E-12 E-5 E-2 E-6 E-3 E-8 E-7 E-5 E-5 E-4 E-3 E-4 E-10 E-11 E-9 E-9 E-11 E-4 E-7 E-9 E-5 E-9 & 12 E-11 E-10 E-7 E-6 E-6 E-5 thru E-7 E-4 E-7 E-3 & E-8 E-6 E-10 E-3 E-8 E-4 E-13 E-4 E-8
2010 Copyright by TexTrail, Inc.
TOWING
TO W I N G
RECEIVER HITCHES
Part# 7357049 7357463 7357520 7357085 7357493 7357469 7357496 7357514 7356758 7357409 7357454 7357516 7356971 7357457 7356821 7357442 7357031 7357091 Part# 7350005 7357163 7356353 7357148 7356995 7356992 7357037 7357040 7356902 7357349 7357142 7357484 7357511 7357076 7357436 7357052 7357406 7356869 7357184 7357016 7356839 7357010 7357199 7357178 Part# 7357313 7357160 7356992 7357343 Part# 7357397 7357394 7357004 7357241 7356953 7356968 7356956
Ref # T13301 T14301 T15301 T13332 T15006 T14332 T15208 T15108 T14108 T14008 T13008 T15008 T13208 T14208 T13042 T14081 T13270 T13336 Ref # T13072 T13389 T12094 T13364 T13230 T13228 T13280 T13297 T13097 T13590 T13361 T14361 T15061 T13326 T14070 T13310 T14001 T13084 T13414 T13251 T13051 T13245 T13432 T13408 Ref # T13561 T13385 T13228 T13581 Ref # T13842 T13841 T13244 T13514 T13183 T13199 T13185
Year 07-09 07-09 07-09 99-07 99-07 99-07 01-08 01-07 01-07 01-07 01-07 01-07 01-08 01-08 88-00 88-00 06-09 05-08 Year 04-09 04-07 96-07 08-09 05-09 05-09 87-04 04-06 98-03 97-04 02-09 02-08 03-08 02-08 07 67-02 67-02 84-01 06-09 05-09 99-04 08-09 07-09 97-06 Year 99-09 05-09 05-09 07-09 Year 03-04 00-04 05-08 05-08 00-04 03-09 08-09
Capacity 6-10K 10-12K 12-14K 6-10K 12-14K 10-12K 12-14K 12-14K 10-12K 10-12K 6-10K 12-14K 6-10K 10-12K 6-10K 6-10K 5-5.5K 3.5K Capacity 6-9K 3.5-4K 3.5K 0.8K 5-8K 5-7.5K 5-8K 5-6K 5-8K 5-8K 6-10K 10-12K 12-14K 5-10K 10-12K 6-10K 10-12K 5-6K 5-7.5K 5-5.5K 5-6K 5-7.5K 3.5-4K 4K Capacity 3.5-5K 5-6K 5-7.5K 4K Capacity 5-6K 5-6K 5-8K 4-6K 4-6K 6-10K 3.5-4K
GM Receiver Hitches Make Notes Chevy / GMC Silverado / Sierra 1500 New Body Style Chevy / GMC Silverado / Sierra 1500 New Body Style Chevy / GMC Silverado / Sierra 1500 New Body Style Chevy / GMC Silverado / Sierra 1500 & 2500 Light Duty Chevy / GMC Silverado / Sierra 1500 & 2500 Light Duty Chevy / GMC Silverado / Sierra 1500 & 2500 Light Duty 6' & 8' BED Chevy / GMC Silverado / Sierra 2500 & 3500 Chevy / GMC Silverado / Sierra 2500 & 3500 6" Bed Chevy / GMC Silverado / Sierra 2500 & 3500 6" Bed Chevy / GMC Silverado / Sierra 2500 & 3500 8" Bed Chevy / GMC Silverado / Sierra 2500 & 3500 8" Bed Chevy / GMC Silverado / Sierra 2500 & 3500 8" Bed Chevy / GMC Silverado / Sierra 2500 Heavy Duty & 3500 ALL Chevy / GMC Silverado / Sierra 2500 Heavy Duty & 3500 ALL Chevy / GMC Trucks Chevy / GMC Trucks 6' Bed & 8' Bed GMC Hummer H3 GM SUV (Buick, Chevy, GMC, Pontiac, Saturn) Chrysler / Dodge Jeep Receiver Hitches Make Notes Chrysler / Dodge Aspen & Durango Chrysler / Dodge Caravan, Grand Caravan & Town&Country (including Stow-N-Go) Chrysler / Dodge / Plymouth Caravan, Voyager & Town&Country (less Stow-N-Go) Chrysler / Dodge / Volkswagon Grand Caravan, Town&Country & Routan (including Stow-N-Go) Dodge Dakota Dodge Dakota Dodge Dakota Dodge Durango Dodge Durango Dodge Full Size Van (except with Factory Step Bumper) Dodge Ram Dodge Ram Dodge Ram Dodge Ram Dodge 1 Ton Truck Dodge / Ford Dodge Full Size Trucks (less Ram 1500); Ford Bronco & F-Series (less Crew) Dodge / Ford Dodge Full Size Trucks (less Ram 1500); Ford Bronco & F-Series (less Crew) Jeep Cherokee Jeep Commander Jeep Grand Cherokee Jeep Grand Cherokee Jeep Liberty Jeep Wrangler Jeep Wrangler Honda / Mitsubishi Hitches Make Notes Honda Odyssey Honda Ridgeline Mitsubishi Raider Mitsubishi Outlander Nissan Hitches Make Notes Nissan Frontier Long Bed Nissan Frontier Short Bed Nissan Frontier Nissan Xterra Nissan Xterra Nissan Titan Nissan Rogue
TOWING
WWW.TEXTRAIL.COM
E-2
TO W I N G
RECEIVER HITCHES CONTINUED
Part# 7357367 7356833 7356917 7357295 7357280 7356779 7350648 7350574 7350300 7357052 7357406 7357481 7357127 7357136 7357424 7357139 7357151 7357133 7356764 7357421 7357490 7357475 Part# 7357208 7357232 7357025 7357070 7356761 7356965 7356950 Part# 7357403 7357400 7356755 7357052 7357406 Part# 7357373 7357379 Part# 7350156 7350167 7350168 Ref # T13650 T13049 T13112 T13550 T13540 T13019 T13085 T13053 T13055 T13310 T14001 T14360 T13352 T13357 T14044 T13360 T13365 T13355 T13014 T14041 T15004 T14355 Ref # T13445 T13509 T13256 T13323 T13013 T13198 T13180 Ref # T13950 T13895 T12923 T13310 T14001 Ref # T13701 T13702 Ref # SBH2 E-1 E-2 Year 05-09 97-03 06-08 02-05 91-03 83-09 94-03 75-07 00-09 67-02 67-02 06-08 04-05 04-05 97-03 06-08 06-08 97-09 99-09 99-09 99-09 99-09 Year 03-09 06-08 04-09 05-09 95-04 07-09 00-06 Year 62-07 97-08 62-03 67-02 67-02 Class 3 3 GTW 3.5K 5K 5K Ford / Lincoln / Mercury Receiver Hitches Make Notes Ford / Mercury / Mazda Escape, Tribute & Mariner Ford / Lincoln Expedition & Navigator Ford Explorer Ford / Mercury Explorer & Mountaineer Ford / Mercury / Mazda Explorer, Mountaineer & Navajo Ford Ranger Ford Winstar Ford Full Size Van All (except with step bumper) Ford Full Size Van All (except with step bumper) Dodge / Ford Dodge Full Size Trucks (less Ram 1500); Ford Bronco & F-Series (less Crew) Dodge / Ford Dodge Full Size Trucks (less Ram 1500); Ford Bronco & F-Series (less Crew) Ford / Lincoln F150 & Mark LT Trucks Ford F150 All Ford F150 with Damper Ford F150 & F250 Light Duty Ford / Lincoln F150 & Mark LT Trucks (Tube) Ford / Lincoln F150 & Mark LT Trucks (Round) Ford F150, F250 & F350 Ford F250 & F350 Super Duty Ford F250 & F350 Super Duty Ford F250 & F350 Super Duty Ford F150, F250 & F350 Toyota Hitches Class Capacity Make Notes 3 5-5.5K Toyota 4Runner 3 3.5-4K Toyota Rav4 3 5K Toyota Sienna 3 5-5.5K Toyota Tacoma 3 5-6K Toyota Tacoma 3 6-10K Toyota Tundra 3 6-10K Toyota Tundra Multi-Fit Hitches Class Capacity Notes 3 5K Ford, Chevy, GMC, Toyota, Dodge & Plymouth 2" Multi-fit 3 6K Ford, Chevy & GMC Trucks 2" Multi-fit 2 3.5K Ford, Chevy, GMC, Toyota, Dodge, Chrysler, Nissan, Jeep, Plymouth, Oldsmobile & Pontiac 1-1/4" Multi-fit 3 6-10K Dodge / Ford - Dodge Full Size Trucks (less Ram 1500); Ford Bronco & F-Series (less Crew) 4 10-12K Dodge / Ford - Dodge Full Size Trucks (less Ram 1500); Ford Bronco & F-Series (less Crew) RV Towing Hitch Capacity Notes 5-6K 2" Drop Adjustable Up To 51" Frame RV Receiver Hitch 5-6K Adjustable Up To 51" Frame RV Receiver Hitch Bumper Receiver Hitches TW Description 350 lb 2" Square Step Bumper Hitch Black Powder Coated 500 lb 4" Drop Step Bumper Hitch 3/8" Steel Plate 8-1/2" Bolt Pattern Width on Center 500 lb 6" Drop Step Bumper Hitch 3/8" Steel Plate 8-1/2" Bolt Pattern Width on Center Class 3 3 3 3 3 3 3 3 3 3 4 5 3 3 4 3 3 3 3 4 5 4 Capacity 3.5K 6-10K 5-8K 5-6K 4-6K 4-6K 4-6K 5-7.5K 5-7.5K 6-10K 10-12K 10-12K 6-10K 6-10K 10-12K 6-10K 6-10K 6-10K 6-10K 10-12K 12-14K 6-10K
TOWING
7350156
7350167
7350319
Receiver Tubes Description Ball Mount Receiver Tube Ball Mount Receiver Tube Ball Mount Receiver Tube Ball Mount Receiver Tube Ball Mount Receiver Tube Ball Mount Receiver Tube Ball Mount Receiver Tube
WWW.TEXTRAIL.COM
E-3
TO W I N G
BALL MOUNTS
Ball Mounts
Part# 7350029 7350080 7350038 7350036 7350037 Ref # D-3 D-4 D-5 D-7 D-9 Finish Black Powder Black Powder Black Powder Black Powder Black Powder GTW / TW 6K / 600 lbs 6K / 600 lbs 6K / 600 lbs 6K / 600 lbs 5K / 500 lbs Drop 2" 2" 4" 6" 8" Rise 3/4" 3/4" 2" 4" 6" Length 8-1/4" 10-1/4" 8-1/4" 8-1/4" 8-1/4" Hole Size 1" 1" 1" 1" 1" Description Ball Mount for 2" x 2" Receiver Tube Ball Mount for 2" x 2" Receiver Tube Ball Mount for 2" x 2" Receiver Tube Ball Mount for 2" x 2" Receiver Tube Ball Mount for 2" x 2" Receiver Tube Hole Size 1"
7350512
TOWING
7350658
7350583
7350024
Adapter Sleeve
Part# 7350604 Ref # D-2505 Finish Black Powder Description Converts 2-1/2" receiver tube to fit a standard 2" ball mount
7350604
7350279
7350188
WWW.TEXTRAIL.COM
E-4
TO W I N G
TOWING ACCESSORIES
6300088
6300018
6300023
6300017 6300130
6300099
7350021
6300132
Part# 6300099 6300098 6300130 6300127 6300017 6300023 6300018 6300088 6300132 Part# 7350021 7350023 Part# 7350209 7350315 7350062 7350264 7350714 7350314 Part# 7350153 9990036 7350254 7350253 7350280 7350255 7350256 7350388 7350249 7350251 7350379 7350374
Ref # 900B 901B 102B 105B 300B 400B 600B 004B 005B Ref # AMSC2 AMSC4 Ref# F-4 F-5 F-6 211HP F-21 F-500 Ref #
10033B 10033BB 10047B 10047BB 10033C 10037B 10037BB 10048B 10048BB 10040B 10049B 10050B
Finish Chrome Chrome Chrome Chrome Chrome Chrome Chrome Plastic Black Finish Black Black Finish Zinc Zinc Zinc Zinc Chrome Zinc Model 6 6 6 6 6 8 8 8 8 10 10 12
Capacity 10K 10K 10K 10K 2K 5K 10K Capacity 10K 10K Size 1/2" 5/8" 5/32" 1/8" 5/8" 5/8"
CONVERT-A-BALL Shank Dia Length Description 1" 2-1/4" Convert-A-Ball Set with interchangeable 1-7/8", 2" & 2-5/16" balls. 1" 2-1/4" Convert-A-Ball Set with interchangeable 1-7/8" & 2" balls. 1" 2-1/4" Replacement Convert-A-Ball Shank 1" 3" Replacement Convert-A-Ball X-Long Shank Replacement 1-7/8" Convert-A-Ball Replacement 2" Convert-A-Ball Replacement 2-5/16" Convert-A-Ball Convert-A-Ball Storage Case for 3-balls Convert-A-Ball Shank Cover Cushioned Ball Mounts Hole Drop Description 1" 2" Convert-A-Ball Cushioned Ball Mount 1" 4" Convert-A-Ball Cushioned Ball Mount Hitch Pins Description 105 Bent Receiver Pin with Retaining Clip 105 Bent Receiver Pin with Retaining Clip 7350314 Retaining Clip 3" Long for 1/2" - 5/8" Hitch Pins 7350714
Retaining Clip 2-5/8" Long for 1/2" - 5/8" Hitch Pins
TOWING
105 Bent Receiver Hitch Dead Bolt for 2-1/2" Receiver Tubes Includes two keys and water-tight dust cap
105 Bent Receiver Pin with Retaining Clip for 2-1/2" Receiver Tubes 10K Multi-Ball Adjustable Tow & Stow Receiver Hitches Description B&W Adjustable Dual Ball Mount with 2" & 2-5/16" Balls Browning Logo B&W Magnum Adjustable Dual Ball Mount with 2" & 2-5/16" Balls B&W Adjustable Tri-Ball Mount with 1-7/8", 2" & 2-5/16" Balls Browning Logo B&W Magnum Adjustable Tri-Ball Mount with 1-7/8", 2" & 2-5/16" Balls Chrome B&W Adjustable Dual Ball Mount with 2" & 2-5/16" Balls B&W Adjustable Dual Ball Mount with 2" & 2-5/16" Balls Browning Logo B&W Magnum Adjustable Dual Ball Mount with 2" & 2-5/16" Balls B&W Adjustable Tri-Ball Mount with 1-7/8", 2" & 2-5/16" Balls Browning Logo B&W Magnum Adjustable Tri-Ball Mount with 1-7/8", 2" & 2-5/16" Balls B&W Adjustable Dual Ball Mount with 2" & 2-5/16" Balls B&W Adjustable Tri-Ball Mount with 1-7/8", 2" & 2-5/16" Balls B&W Adjustable Tri-Ball Mount with 1-7/8", 2" & 2-5/16" Balls
Model 6 8 10 12
A Drop
3" 5" 7" 9"
B Rise
3-1/2" 5-1/2" 7-1/2" 9-1/2"
C
Total Vertical Adjustment
Adjust to multiple heights, choose ball configuration, & stow away after use.
7350254
7350253
7350280
WWW.TEXTRAIL.COM
E-5
TO W I N G
TOWING ACCESSORIES CONTINUED
Part# 7350659 7350660 7350268 7350267 Part# 8200170 8200221 7350266 7350377 7350375 7350376 7350277 7350446 10K Adjustable Tow & Stow Receiver Hitch / Pintle Hitch Ref # Description TS10055 B&W Adjustable Pintle Hitch with 2" Ball B&W Adjustable Pintle Hitch with 2-5/16" TS10056 Ball 10051 2" Chrome Pintle Ball 10052 2-5/16" Chrome Pintle Ball Receiver Accessories Ref # Description 50796 5/8" Chrome Receiver Deadbolt Lock T3 5/8" Chrome Receiver Deadbolt Lock TS35010 5/8" x 4-1/2" Stainless Steel Hitch Pin 35014 BW Hitch Plate Cover 10" Chrome 7350375 7350266 7350375 35012 BW Hitch Plate Cover 6" Chrome 35013 BW Hitch Plate Cover 8" Chrome 50943 BW Receiver Hitch Silencer Pad F-10 Tube Cover Formed Steel Chrome Finish
8550036 8550020 8550027
7350277
8200170
TOWING
8550050
Part#
Ref #
Eye 3" 3" 3" 3" 1" 3/4" 3/4" 1" 3/4" Holes 4 6 4 4 7 Size 5/8"-11 1/2"-13
7350391
8550036 E-63 8550037 E-64 8550027 16137 8850001 E-66 8550050 CL20XL8 8550052 9095 8550053 9095XL 8550013 1807800 8550051 0897900 Part# Ref # 6750131 PS-AC01F 6750132 PS-AC02F E-23 8550020 E-24 8550030 E-241 8550021 Part# Ref # 7030001 B9020 8550026 E-230
Bracket & Description Bolts* Oily 12K Yes Adjustable Pintle Eye with 4-hole Brkt Oily 12K Yes Adjustable Pintle Eye with 6-hole Brkt Oily 14K No Adjustable Pintle Ring / Drawbar Oily 20K No Adjustable Pintle Ring / Drawbar Oily 20K Yes Adjustable Clevis with 6-hole Brkt Oily 12K Yes Adjustable Clevis with 4-hole Brkt Oily 12K Yes Adjustable Clevis with 6-hole Brkt Oily 20K No Adjustable Clevis Oily 12K No Adjustable Clevis * Included with Part Number Length Capacity Shank Type Description 7-1/2" 24K Weld-On 3-Position Channel Bracket for Adjustable Couplers 11-1/2" 24K Weld-On 5-Position Channel Bracket for Adjustable Couplers 7" 10K 8-1/2" Bolt-On 3-Position Adjustable Pintle Mount 7" 20K 10-1/2" Bolt-On 3-Position Adjustable Pintle Mount 13" 30K 12-1/2" Bolt-On 5-Position Adjustable Pintle Mount Length Grade Description 4/12" 8 Hardware Kit for Adjustable Mounts 2ea Nuts & Bolts 8 Hardware Kit for Adjustable Mounts 4ea Nuts, Washers & Bolts 10K Aluminum Rapid Hitches Ref # Rise / Drop Description 7350454 Part# 7350391 3310 5-1/2" 2" & 2-5/16" Dual Ball 2" Receiver Ball Mount 7350454 3313 4" to 10" 2" & 2-5/16" Dual Ball 2" Receiver Ball Mount 7350716 3424 Replacement 2" & 2-5/16" Balls 8K Aluminum Ball Mounts Part# Ref # Rise / Drop Hole Description 7350392 3503 2 1 2 Receiver Aluminum Stinger 7350393 3505 4 1 2 Receiver Aluminum Stinger 7350394 3507 6 1 2 Receiver Aluminum Stinger 7350447 3509 8 1 2 Receiver Aluminum Stinger 7350448 3511 10 1 2 Receiver Aluminum Stinger Finish Capacity
E-6
WWW.TEXTRAIL.COM
TO W I N G
Part# 8200134 8200316 8200221 8200140 8200150 8200103 7350266 Part# 6300045 6300047 6300026 6300068 6300070 6300082 6300015 6300078 6300067 6300076 6300086 6300079 6300191 7350396 6300081 6300031 6300085 6300074 6300193 6300063 6300065 6300061 6300062 Part# 6300031-01 6300079-01 6300082-01 Part# 7350109 Ref # 3434 3492 T3 374DAT 375DAT TBB4 TS35010 Ref # A-15 A-16 A-2 A-18 A-19 A-4 A-38 A-33 A-34 A-20 A-90 A-5 A-7 A-39 A-21 A-6 A-35 A-36 A-43 A-41 94006 A-91 A-92 Ref # TTB2517 TTB2516 TTB2016 Ref # 4843 Receiver Locks Description Rapid Hitch Chrome Steel Lock Set Keyed Alike Rapid Hitch Chrome Steel Lock Set Keyed Alike 2.5 8200134 or 5/8" Chrome Receiver Deadbolt Lock 8200316 1/2" Receiver Lock 5/8" Receiver Lock 8200103 5/8" x 4-1/2" Locking Hitch Pin 5/8" x 4-1/2" Stainless Steel Hitch Pin Bulk Trailer Balls Ball Shank Length Rise Finish Capacity Description 1-7/8" 3/4" 2-1/8" Chrome 2K Fine Thread Nickel Chrome Plated Trailer Ball 1-7/8" 3/4" 3" Chrome 2K Fine Thread Nickel Chrome Plated Trailer Ball 1-7/8" 1" 2-1/8" Chrome 3.5K Fine Thread Nickel Chrome Plated Trailer Ball 2" 3/4" 2-1/8" Chrome 3.5K Fine Thread Nickel Chrome Plated Trailer Ball 2" 3/4" 3" Chrome 3.5K Fine Thread Nickel Chrome Plated Trailer Ball 2" 1" 2-1/8" Chrome 6K Fine Thread Nickel Chrome Plated Trailer Ball 2" 1" 2-1/4" Chrome 12K Coarse Thread Heat Treated Nickel Chrome Trailer Ball 2" 1" 2-1/8" 1" Chrome 6K Fine Thread Nickel Chrome Plated Trailer Ball 2" 1" 2-1/8" 2" Chrome 6K Fine Thread Nickel Chrome Plated Trailer Ball 2" 1" 3" Chrome 6K Fine Thread Nickel Chrome Plated Trailer Ball 2" 1-1/4" 2-5/8" Chrome 10K Coarse Thread Heat Treated Nickel Chrome Trailer Ball 2-5/16" 1" 2-1/8" Chrome 7.5K Fine Thread Nickel Chrome Plated Trailer Ball 2-5/16" 1" 2-1/4" Chrome 10K Fine Thread Nickel Chrome Plated Trailer Ball 2-5/16" 1" 2-1/4" Chrome 12K Coarse Thread Heat Treated Nickel Chrome Trailer Ball 2-5/16" 1" 3" Chrome 6K Fine Thread Nickel Chrome Plated Trailer Ball 2-5/16" 1-1/4" 2-5/8" Chrome 10K Fine Thread Nickel Chrome Plated Trailer Ball 2-5/16" 1-1/4" 2-5/8" 1" Chrome 10K Fine Thread Nickel Chrome Plated Trailer Ball 2-5/16" 1-1/4" 2-5/8" 2" Chrome 10K Fine Thread Nickel Chrome Plated Trailer Ball 2-5/16" 1-1/4" 2-5/8" 1" Raw 25K Fine Thread Raw Finish Trailer Ball 2-5/16" 1-1/4" 2-5/8" Raw 30K Coarse Thread Heat Treated Raw Finish Trailer Ball 2-5/16 1-1/2 2-3/4 2 Raw 30K Raw Finish Trailer Ball 2-5/16" 2" 3-1/2" Raw 30K Coarse Thread Heat Treated Raw Finish Trailer Ball 3" 2" 3-1/2" Raw 30K Coarse Thread Heat Treated Raw Finish Trailer Ball Packaged Trailer Balls Ball Shank Length Rise Finish Capacity Description 2-5/16" 1-1/4" 2-5/8" Chrome 10K Fine Thread Nickel Chrome Plated Trailer Ball 2-5/16" 1" 2-1/8" Chrome 7.5K Fine Thread Nickel Chrome Plated Trailer Ball 2" 1" 2-1/8" Chrome 6K Fine Thread Nickel Chrome Plated Trailer Ball Back-Up / Hitch Assist Camera Power: Monitor Camera Transmits Description Auxiliary/ Lighter Plug 4-Way Flat 50+ Feet Wireless 3-1/2" Color Monitor with Magnetic Base & Camera
TOWING
Wireless!
Part# 8550015 8550044 8550031 8550042 8550024 6300025 6300022 Ref # E-21 E-210 S15T E-19 E-20 E-19R E-20R Eye / Ball 2" - 3" 2" - 3"
2-3/8" - 3"
Bolts 4 4 2 4 4 -
Pintle Hooks & Combination Pintle Hitches Capacity Description Rigid Forged Steel Pintle Hook with Linch Style Safety Pin with Mounting Hardware 10K Rigid Forged Steel Pintle Hook with Linch Style Safety Pin with Mounting Hardware 30K Swivel Forged Steel Pintle Hook with Spring Cushion 30K 16K Combination Pintle Hook / 2" Chrome Ball Black Powder Coated 10K Rated Ball Combination Pintle Hook / 2-5/16" Chrome Ball Black Powder Coated 12K Rated Ball 16K 10K Pintle Ball Combination Replacement Ball 12K Pintle Ball Combination Replacement Ball
8550031 8550042
8550015
WWW.TEXTRAIL.COM
E-7
TO W I N G
Part# 6300145 6300060 7350115 6300106 6300110 Ref # 3434 TTBK2516 A-93 94011 94012 Size 4" 2-5/16" Specialty Balls Description Smooth Shank Eye Ball 30K Ball Kit with Collar consisting of 6300106 & 6300110 5/8" x 1-1/4" Sway Control Replacement Hitch Ball 30K 2-3/16" Drop-In Machined Ball 30K 2-3/16" Ball Collar Hitchin Rods Part# 7350274 Ref # HR01C Description Magnetic Hitchin Rod Set 48"
Size
1-1/4" x 1-1/4" 1-1/4" x 1-1/4" 2" x 2" 2" x 2" 2" x 2" 2" x 2" 2" x 2" 2-1/2" x 2-1/2"
Receiver Tubing - Raw Finish Description 6" Receiver Tube 12" Receiver Tube 6" Receiver Tube 12" Receiver Tube 18" Receiver Tube with 1/2" Reinforcing Collar 24" Receiver Tube with 1/2" Reinforcing Collar 36" Receiver Tube with 1/2" Reinforcing Collar 10" Receiver Tube Weld-On Hitch Box Description 2"ID Square Raw Finish Weld-On Hitch Box
TOWING
7350318
7350319
7350718
Part# 7350718
Ref # E-17
Capacity 5K
7350683
7350684
60" x 20" Bolt-Together Cargo Carriers for 2" Receiver Hitches Part# Ref # Capacity Depth Finish Description Powder Coated Carrier with Fixed Shank 7350683 18130 0.5K 2-3/4" Powder Coated Carrier with Folding Shank 7350684 18131 0.5K 6" Note: Both Carriers include a 5/8" Hitch Pin Note: Carriers may interfere with rear-mounted spare tires. Hitch Ball Reducers Reduce To Description 3/4" Hitch Ball Reducer Bushing 1" Hitch Ball Reducer Bushing Weight Distribution Hitches Description Round Bar Bolt-Together Weight Distribution Kit with Shank Included 12" Hitch Bar Round Bar Bolt-Together Weight Distribution Kit with Shank Included 12" Hitch Bar
Trunnion Style Bolt-Together Weight Distribution Kit with Shank Included 12" Hitch Bar Trunnion Style Bolt-Together Weight Distribution Kit with Shank Included 12" Hitch Bar
Part# 6300108 6300107 Part# 7350717 7350449 7350387 7350389 7350158 7350115
Ref # F-1 F-2 Ref # 17000 17002 17301 17302 17200 A-93
Sway Control Kit to reduce lateral movements of trailer caused by wind 5/8" x 1-1/4" Sway Control Replacement Hitch Ball
7350158 - Sway Control Kit 7350387
7350115
WWW.TEXTRAIL.COM
E-8
TO W I N G
5TH WHEEL TO GOOSENECK ADAPTER
7350207
7350208
Adjustment
Offset 8" -
Ranch Hitch Adapter Description 5th Wheel to Gooseneck Adapter with Remote Cable Operation 5th Wheel to Gooseneck Adapter with Remote Cable Operation Slide Hammer Gooseneck King Pin Adapters With Skid Plate Description Ref # Size Type 4" 4" 4-1/2" Round Square Square Yes Yes Yes Gooseneck King Pin Adapter Gooseneck King Pin Adapter Gooseneck King Pin Adapter
TOWING
7150033 6750137
7150033
7150030
Gooseneck Extender Part# 6750206 Ref # 4200 I.D. 4" Type Round Capacity 24K Description 10" Gooseneck Extender
Gooseneck King Pins Description King Pin with 3/8" Bolster Plate King Pin with 1/2" Bolster Plate Fifth Wheel
Part# Ref # Capacity King Pin Description 7150005 FW0001 32K 2" 12" Diameter Holland Mini-Fifth Wheel Invert On Trailer for a single pivot Fifth Wheel with Safety Lock Handle. 8K Max Vertical Load Capacity. Accepts 2" SAE King Pins.
7150005
Capacity 5K 5K -
Adjustable Tow Bar Description Adjustable Tow Bar. Adjust from 26" to 41" wide. 2" Coupler and Universal Bumper Brackets 2-each 1/4" X 60" Coated Safety Chain Assemblies with Safety Latch Hooks 5/8" x 3" Zinc Pin and Clip
7350434 7350720 7350315
Gooseneck Hitch Plates & Fixed Ball Hitch Part# 7350370 7350719 6300117 6300119 6300189 6300063 7350671 6300200 Ref # 16055 16085 C-54 C-53 C-113 A-41 C-10 C-55 Capacity 25K 25K 25K 25K 30K 30K 30K Description
Gooseneck Bent Plate 2-5/16" Ball. Pin & Clip Included. 4-Point fully mountable/demountable function. Carbide Finish* Gooseneck Spyder 2-5/16 Ball. Pin & Clip Included. 4-Point fully mountable/demountable function. Carbide Finish* Gooseneck Bent Hitch Plate 2-1/2" Tall X 18-1/4" x 48" x 1/4" Thick Carbide Finish. Safety Chain and Ball sold separately. Gooseneck Bent Hitch Plate 2-1/2" Tall X 18-1/4" x 48" x 1/4" Thick Raw Finish. Safety Chain and Ball sold separately. Safety Chain U-Bolt Kit 2-5/16" Coarse Thread Heat Treated Raw Finish Trailer Ball 1-1/4" Dia Shank x 2-5/8" Long Gooseneck Fixed Ball Hitch 2-5/16" Ball. 12" x 12" Carbide Finish Flat Plate. Safety Chain sold separately. Gooseneck Flat Plate 2-5/16" Chrome Ball. Two 1/2" Welded Forged D-Rings. 13" x 46" Carbide Finish Flat Plate.
7350370
7350719
WWW.TEXTRAIL.COM
E-9
TO W I N G
Fifth Wheel Hitches Part# 7358100 7358103 7358104 Ref # 16115 16516 16616 Capacity 16K 16K 16K Height
13-1/4"-17" 14"-17" 14"-17"
Description E5 Auto-Locking Dual Pivot Head Fifth Wheel Hitch E5 Fifth Wheel with Roller E5 Fifth Wheel with Roller & Base Rails
Color Indicator locations
7358100
Q5 Locking Jaw System - Self Aligning Spherical Axial Bearing Fifth Wheel Hitch with 3 Point Indicator Q5 Fifth Wheel with Roller Q5 Fifth Wheel with Roller & Base Rails R5 Self-Locking Fifth Wheel Roller 12" Travel Universal Fifth Wheel Base Rail Kit* Carbide Universal Base Rails Only
7358100
TOWING
* Includes rails, brackets, and hardware. Custom vehicle brackets also available. Custom Fifth Wheel Bracket Kits*
Custom Fifth Wheel Brackets cut install time by 50% Reduces or eliminates the need for drilling Eliminates need for universal brackets and hardware To be used in combination with 16204 Carbide Universal Base Rails
7358105
Year 2007-2009 1999-2007 2001-2009 2009 2009 2006-2008 2002-2005 2003-2009 2004-2010 1997-2003 2004 2005-2010 1999-2004
Part# 7350710 7350723 7350723 7350735 7350736 7350737 7350725 7350737 7350726 7350727 7350727 7350728 7350729 7350728 7350738 7350730 7350731
Ref # 16412 16418 16418 16422 16421 16420 16419 16420 16441 16437 16437 16447 16443 16447 16470 16468 16465
7350732
New & Classic Body Style Including Mega & Crew Cabs Except Mega & Crew Cabs 6' & 8' Beds, Including Mega Cab All
6' & 8' Beds, Including Mega Cab 6' 5" & 8' Beds Only All
7358106
No Drill No Drill No Drill Drill Drill Drill Drill Drill
All, Except Cab & Chassis All 6' 5" Bed Only. Will not fit Crew Max Standard Cab, Long Box Only
16421
No Drill
7350726
* 16204 Base Rail Required for Installation. X-5 Fifth Wheel Adapter Plate Part# 7350721 Ref # 16310 Capacity 20K Finish Carbide Description Adapts Square Turnover Ball goosenecks to 5th wheel *
* Fits Standard Fifth Wheel Rails. Fifth Wheel / Gooseneck Hitch Adapter Harness Part# 7000003 7000004 Ref # 56070 56071 Makes Chevy / GMC / Ford Dodge Description 7' Hitch Adapter Harness 7' Hitch Adapter Harness
7350721
7150019 7000003
Fifth Wheel Lube Plate Part# 7150019 Ref # 16721 Description 10" 5th Wheel Lube Plate for reduced wear and tear when towing
7000004
WWW.TEXTRAIL.COM
E-10
TO W I N G
GOOSENECK HITCHES
Folding Ball Gooseneck Hitch Part# Ref # C-52 Capacity 30K Description Gooseneck Folding Ball Hitch 2-5/16" Ball. 12" x 12" Carbide Finish Flat Plate. Safety Chain sold separately. 6300138
TOWING
7350671
6300200
Fixed Ball Gooseneck Hitch Part# 7350671 6300200 Ref # C-10 C-55 Capacity 30K 30K Description Gooseneck Fixed Ball Hitch 2-5/16" Ball. 12" x 12" Carbide Finish Flat Plate. Safety Chain sold separately. Gooseneck Flat Plate 2-5/16" Chrome Ball. Two 1/2" Welded Forged D-Rings. 13" x 46" Carbide Finish Flat Plate. 30K Folding / Fixed Ball Gooseneck Hitch Installation Kits* Universal Gooseneck Hitch Installation Kit Part# 6300160 Ref # C-502 Capacity 30K Description Universal Rail Kit. Raw Finish. Drill. 30K Custom Gooseneck Hitch Installation Kits Laser cut for precise fit Grade 5 mounting hardware Easy to follow installation instructions Make Chevy / GMC Model 1500 1500/2500LD 2500HD /3500 Dodge Ram 1500 Ram 2500 & 3500 Ford F-150 F-150 F-250 & F-350 F-450 Style New Body Style - All Beds Classic Body Style - All Beds New & Classic Body Styles All Year 2007-2009 1999-2007 2001-2009 1994-2001 2002 All Beds, Including Mega Cab 1994-2002 2003-2008 All Heritage Edition Only All Super Duty All Super Duty Except Cab & Chassis 2004-2008 1997-2003 2004 1999-2009 2008-2010 Part# 6300142 6300156 6300156 6300157 6300144 6300157 6300143 6300158 6300141 6300141 6300140 6300140 Ref # C-331 C-341 C-341 C-509 C-319 C-509 C-520 C-321 C-506 C-506 C-322 C-322 Notes Drill No Drill No Drill Drill No Drill Drill Drill No Drill Drill Drill No Drill Drill
6300140 6300160
* Universal and Custom Gooseneck Hitch Installation Kits are for use with Fixed and Folding Ball Gooseneck Hitches 7350671, 6300200 & 6300160. Gooseneck Accessories Part# 6300189 6300203 Ref # C-113 C-150 Description Safety Chain U-Bolt Kit Folding Ball Steel Cutting Template
E-11
6300189 6300203
WWW.TEXTRAIL.COM
TO W I N G
GOOSENECK HITCHES CONTINUED
7350667
Turnover Ball Gooseneck Hitch Style Year Part# Ref # New Body Style Short Bed Only 2007-2009 7350666 1057 New Body Style Long Bed Only 2007-2009 7350565 1007 Classic Body Style Light Duty 1999-2007 7350639 1059 3/4 Ton New Body Style Heavy Duty 2001-2009 7350667 1067 Classic Body Style Light Duty 1999-2007 7350639 1059 1 Ton New Body Style 2007-2009 7350667 1067 Classic Body Style 2001-2007 7350560 1062 1/2 Ton All 2004-2009 7350577 1104 All 1997-2003 7350641 1197 Heritage 2004 7350641 1197 3/4 Ton Light Duty 1997-2003 7350641 1197 Super Duty 1999-2009 7350672 1108 1 Ton Super Duty 1999-2009 7350672 1108 F-450 with Factory Installed Beds 2008-2009 7350672 1108 1/2 Ton All 2009 7351309 1309 All except Mega-Cab 2002-2008 7350561 1316 Mega-Cab Short Bed 2003-2009 7350617 1306 All 1994-2001 7350594 1394 3/4 Ton All 2003-2009 7350617 1306 All 1994-2001 7350594 1394 1 Ton All 2003-2009 7350617 1306 All 1994-2002 7350594 1394 All 2004-2009 7350891 1208 2007-2009* 7350893 1257 All 2000-2006 7350892 1251 * The ball cannot be stored in the receiver of this hitch. B&W Accessories will NOT work with this model. Turnover Ball Gooseneck Hitch Accessories Ref # Description 6750206 1900 Latch Pin Pull Handle 2000 Turnover Ball 30K Machined 2-5/16" 7350595 2025 Turnover Ball 3" Ball 2050 Turnover Ball 20k High-Rise 2-5/16" 7350576 7350899 4000 Turnover Ball 2" King Pin 4085 Turnover Ball 4" Gooseneck Extender 2-5/16" 4200 Turnover Ball 10" Gooseneck Extender 24K 4"ID X-5 Fifth Wheel Adapter Plate Ref # Capacity Finish Description 16310 20K Carbide Adapts Square Turnover Ball goosenecks to 5th wheel * * Fits Standard Fifth Wheel Rails. Model 1/2 Ton
Notes
TOWING
Ford
Dodge
Nissan Toyota
Part# 7350902 7350576 7350901 7350899 7350564 7350595 6750206 Part# 7350721
7350564
7350721
Part# 7350563 7350897 7350894 Ref # 3000 3050 1500 Capacity 18K 18K Companion Fifth Wheel RV Hitch Description Turnover Ball Companion Fifth Wheel RV Hitch Turnover Ball Companion Fifth Wheel RV Hitch for Flat Bed Trucks Installation Kit for Flat Bed Companion Fifth Wheel Hitch (welding required)
7350563
WWW.TEXTRAIL.COM
E-12
TO W I N G
TEXTRAIL PACKAGED PRODUCTS
Part#
6300031-01 6300079-01 6300082-01
Ref #
TTB2517 TTB2516 TTB2016
Ball
2-5/16" 2-5/16" 2"
Shank
1-1/4" 1" 1"
TOWING
Part#
7350209-01 7350315-01
Ref #
TTRP120 TTRP583
Finish
Zinc Zinc
Size
1/2" 5/8"
Packaged Receiver Pins Description 105 Bent Receiver Pin with Retaining Clip 105 Bent Receiver Pin with Retaining Clip
6300031-01
6300082-01
7350315-01
7350209-01
Ref #
TTRL584 TTRL582 TTRL585 TTRL583
Description 5/8" Chrome Receiver Deadbolt Lock 1/2" Receiver Lock 5/8" Receiver Lock 5/8" x 4-1/2" Locking Hitch & Coupler Pin Set - Keyed Alike
8200150-01
8200221-01
8200177-01
WWW.TEXTRAIL.COM
E-13
TO W I N G
TOWING
WWW.TEXTRAIL.COM
E-14
C A R G O CO N T R O L
Table Of Contents - Cargo Control Tie Loops Grab Handles D-Rings Rings Rope Rings Load Binder Chain Hooks Quick Links Links E-Track Cargo Management System Load Locker Winch Ratchets Ratchet Straps Winch Bar Corner Protectors Web Winder Ratchet Straps Axle Straps Rubber Straps Wheel Nets Wheel Chock Motorcycle Wheel Chock Gas / Water Cooler Holder Racks RACK'EM Trailer Dolly Bins
WWW.TEXTRAIL.COM
F-1
F-2 F-2 F-2 F-2 F-2 F-3 F-3 F-3 F-3 F-3 F-3 F-4 F-4 F-5 F-5 F-5 F-5 F-5 F-5 F-5 F-5 F-5 F-5 F-6 F-6 F-6 F-6 F-6 F-6 F-6
2010 Copyright by TexTrail, Inc.
CARGO CONTROL
C A R G O CO N T R O L
Tie Loops Part# 7500157 8850009 5350715 5350147 5350146 5350716 5350222 8850109 5350719 5350605 Ref # TLA122 TLM122 TLM3812 TLM7161 TLM121 TLM3821 TLM3811 TLM382 GHM385 Description Tie Loop - Aluminum Tie Loop - Metal Tie Loop - Metal Tie Loop - Metal Tie Loop - Metal Tie Loop - Metal Tie Loop - Motor Cycle Tie Down Tie Loop - Metal Grab Handle - Metal
5350716 5350719
Diameter 1/2" 1/2" 3/8" 7/16" 1/2" 3/8" 3/8" 3/8" 3/8" 7/16"
I.D. 2" 2" 1/2" 1" 1-1/2" 2-1/4" 1-1/4" 2" 5" 5"
5350605
Style Round Round Bent Bent Bent Square Bent Bent Square Square
CARGO CONTROL
8850009
5350222
5350146
D-Rings & Rope Ring Part# 7500158 9250089 9250088 9250087 9250019 9250035 9250036 9250016-02 9250016 9250034 9250033 Ref # R716 R14 R38 R14B DR12S DR12Z DR58S B50 B50A B801 B901 Description Rope Ring - 7/16" dia. Aluminum bolt-on with bracket Rope Ring - 1/4" dia. steel zinc. Rope Ring - 3/8" dia. steel zinc. Recessed 3" hole Rope Ring - 1/4" dia. steel zinc w/bazel D-Ring - 1/2" dia. steel w/ weld-on bracket 12K UBS* D-Ring - 1/2" dia. zinc w/ bolt-on bracket 12K UBS* D-Ring - 5/8" dia. steel w/ weld-on bracket 19K UBS* D-Ring - 1" dia. steel weld-on 3x4 46,760K UBS* USA D-Ring - 1" dia. steel weld-on 3x4 46,760K UBS* Rope Ring - Recessed Zinc 3-5/8" hole 6K USB* Rope Ring - Recessed Zinc 360 Rotating 6K USB* *Ultimate Breaking Strength
9250035 9250036 Safe Working Load
7500158 9250089
9250088
9250087
9250034
9250019
9250016-02 9250033
WWW.TEXTRAIL.COM
F-2
C A R G O CO N T R O L
Load Binders and Chain Part # Ref # Description Safe Working Load 5,400 LB 5,400 LB 4,700 KB Grade 70
9250059 LBLR Load Binder - 5/16" w/lever accepts 5/16" - 3/8" chain 9250060 LBRT Load Binder - 5/16" Ratchet accepts 5/16" - 3/8" chain 9250024 TRC516 Transport Chain - 5/16" x 20' w/ 5/16" Forged Hooks See Section J for more Chain.
CARGO CONTROL
Description 1/4" Grab Hook 7,800 UBS* 5/16" Grab Hook 11,700 UBS* 3/8" Grab Hook 16,200 LB UBS* 1/4" Slip Hook w/ Latch 7,800 UBS* 5/16" Slip Hook w/ Latch 11,700 UBS* 3/8" Slip Hook w/ Latch 16,200 LB UBS* *Ultimate Breaking Strength Hooks & Links Description Snap Hook - Double-End 3-1/2" x 5/8" Snap Hook - Swivel 3-1/2" x 5/8" Snap Hook - Open End 3-1/2" x 3/8" Quick Link - 3/16" 616 LB UBS* Quick Link - 5/16" 1540 LB UBS* Quick Link - 3/8" 1900 LB UBS* Quick Link - 1/2" 2650 LB UBS* Spring Link - 5/16 350lb WLL Zinc Spring Link - 3/8 425lb WLL Zinc S Hook - 7-16" 5K S Hook - 7-16" 5K w/ Catch Spring Link - Bulk 100 pk E-Track Systems Description E-Track Horizontal 10' Green Primer E-Track Horizontal 10' Galvanized E-Track Vertical 10' Green Primer Standard Beam Socket for 2X4 lumber D-Ring 1K Tie Off 1K Rope Tie Off. Spring Actuated 1K Ratchet Buckle Strap 12' 6k webbing 1K load limit
F-3
Grade
GRAB
SLIP
Part# 8850090 8850091 8850092 7300045 9250401 9250012 9250403 9250368 9250369 8850018 8850019 8200146
Ref # 162S 225 231 316QL 516QL 38QL 12QL 516SL 38SL 716S 716SC 1270
8850090
8850091
8850092
SPRING
QUICK
*Ultimate Breaking Strength *DO NOT EXCEED ULTIMATE BREAKING STRENGTH. NOT DESIGNED FOR OVERHEAD LIFTING.*
9250136
9250045
9250103
WWW.TEXTRAIL.COM
C A R G O CO N T R O L
Part #
9250500 9250504 9250537 9250505 9250506 9250507 9250533 9250512 9250514 9250513 9250516 9250515
CARGO CONTROL
Side rails are the start of a load management system with slide mounts or tie downs. They are installed on the side of the trailer and /or the floor. They can easily be cut to adapt to trailer size. 9250500
Tie downs give an anchor anywhere on your track. They hold cargo steady with your material of choice. Works with a tie down strap, rope, bungee cord or anything that can hang on. 9250506 EACH 9250507 PR - CLAM PKG
Keep your lug wrench out of the way. The lug wrench mount can mount anywhere. 9250514 - BULK 9250513 - EACH CLAM PKG Keep that spare tire out of the way. Tire mount comes with its own mini-track to mount independently. Existing track can be cut down any length and placed in any area it can be mounted. Can be used with any size tire. 9250516 EACH 9250515 EACH CLAM PKG
Cargo Management System Part # 9250534 9250535 9250501 9250502 9250536 9250525 9250526 Ref # Description Side Rails - 60" Truck Off-Set Lip (Most GM & Dodge) Side Rails - 80" Truck Off-Set Lip (Most GM & Dodge) Side Rails - 60" Truck Smooth Lip Ford Side Rails - 80" Truck Smooth Lip Ford Install Kit - Rivet Gun, Allen Wrench and all Hardware Cargo Gate - Mid Size 54" to 60" Cargo Gate - Mid Size 60" to 66"
Aluminum load brace gives your system a finished look. Dove tails are extruded on both sides of brace for side to side locking. Comes 99 and is cut to size with 2 end caps. 9250530 99 Piece 9250531 Plastic End Cap Mount these in your trailer to hold your Load Brace or wooden 2x4 to store safely when not in use. 9250533 EACH 9250512 PR - CLAM PKG
Lock in using slide mounts to gate off sections or flip upside down near truck window for headache rack. The Aluminum brace has tracks on both sides for side-to-side locking. Fits any stock bed. The gate is made of steel and powder coated. 9250525 Mid-Size fits 54- 60 9250526 Full-Size fits 60- 66
WWW.TEXTRAIL.COM
F-4
C A R G O CO N T R O L
Cargo Control Part # 9250156 9250159 9250111 9250108 9250371 9250372 9250130 9250115 Ref #
APS15 49368-10 43887-10 43887-11 SL82 SL32 557xx 45982-10 49347-10 41659-10-27 47640-30 43795-10-20
Description Ratchet Strap - 1" x 15' with S-Hooks Ratchet Strap - 1" x 15' with S-Hooks 4-Pack Ratchet Strap - 1" x 16' with Wire Hooks Ratchet Strap - 1" x 20' with Wire Hooks Ratchet Strap - 1.25" x 16' with S-Hooks 700lb WLL* Ratchet Strap - 1.5" x 15' with J-Hooks 400lb WLL* Ratchet Strap - 2" x 15' with Flat Hooks 10K 3333 WLL* Ratchet Strap - 2" x 27' with Flat Hooks 10K 3333 WLL* Ratchet - Replacement for 9250115 and 9250130 with Flat Hook Strap - Replacement for 9250115 and 9250130 27' with Flat Hook Lashing Winch - 2" with Hex Drive 4.4K WLL* Strap - 4" x 27' with flat Hook 18K 5,400 WLL* Winch - Use with 4" Straps Weld-On Winch - Use with 4" Straps Bolt-On Winch - Use with 4" Straps Storable Slider Winch Track - for use with 9250150 Winch Bar - Standard Painted Black Winch Bar - Combination Box End Chrome Web Winder - use with 2" & 4" Straps Steel Painted Corner Protector - High Density Polymer Straps up to 4"
9250142 9250115 9250065 - ratchet 9250142 - strap 9250130 9250156 43877-10 15 43887-10 20
CARGO CONTROL
9250065 9250102 9250142 9250109 9250110 9250149 9250140 9250150 9250153 9250151 9250152 9250373 9250357
43795-10-30YAS Strap - 4" x 30' with flat Hook 18K 5,400 WLL* 43563-10 43564-14 43565-12 42357-11 42313-10 42313-12 45801-10
43986-10
9250109-27
9250149
9250140 9250153
9250150
9250357
9250151 9250152
9250373
Axle Straps and Wheel Nets Part # 9250105 9250106 9250104 9250116 9250360 9250162 9250156 9250138 9250137 9250139 9250321 9250322 9250323 9250324 Ref #
42101-31 49020-20 30AS21 -
Description Axle Strap - 2" Turned Snap Hook / Ratchet with Flat Hook BL5 Axle Strap - 2" x 8' Flat Snap Hooks with Ratchet BL1 Axle Strap - 2" x 21" with Protective Sleeve BL4
Ratchet Strap - 2 x 27 with J-Hooks 10K 3333 WLL*
9250142 9250106
Ratchet - WITH Snap Hook Soft Tie - 18" Motorcycle Extension 2-PACK Wheel Net - Use with 14" - 15" Tires Wheel Net - Use with 13" - 17" Tires Wheel Net - Use with 10" - 22" Tires with Ratchet Rubber Tie - 9" rubber Rubber Tie - 15" rubber Rubber Tie - 21" rubber Rubber Tie - 31" rubber
Assorted Rubber Straps
40985-05-12 Sleeve - Replacement Protective Sleeve 2615SH 45143-22 30ATB 30RT RTS9 RTS15 RTS21 RTS31
WWW.TEXTRAIL.COM
F-5
C A R G O CO N T R O L
Motorcycle Wheel Chocks Part # 9750007 9750008 9750009 9750016 9750014 Ref # WC35 WC55 WC65 WOTO Description Wheel Chock - 3-1/2" Removable Chrome Wheel Chock - 5-1/2" Removable Chrome Wheel Chock - 6-1/2" Removable Chrome Wheel Chock - T-Bolt
9750014 9750016
MD010T Wheel Chock - Mounting Hardware 9750022 SPWC3BT Wheel Chock - 6-1/2" Removable Chrome Cargo Solutions Part # 6650612 6650625 6650626 6650628 6650635 6650637 6650638 6650639 6650640 6650641 9420022 Ref # RA-1L RA-4 RA-5 RA-6 RA-7 RA-10B RA-10C RA-15 RA-18 RA-19 RA-20 Description 5 Gal. Gas Can/Cooler Rack Back Pack Blower Rack Trimmer Rack Trimmer Rack - For open trailer (pad locks sold separately) 6-Hook Multi-Tool Rack Lubrication Bin Only (Must be used with 6650636) Lubrication Bin - Large Capacity (Must be used with 6650636) Shovel Rack Beverage Cooler Rack Blower Rack - For open trailer (pad locks sold separately) Trailer Dolly
6650636
6650534
CARGO CONTROL
6650637
6650638
This rack will 6650612 securely hold 3 trimmers and has a built-in locking mechanism. 6650628
6-Hook Multi-Tool Rack Holds rakes, hoses, cords and more; it can hold almost anything. 6650635
The 3 or 5-gallon beverage cooler rack is designed for either an open or an enclosed trailer. 6650640
6650625 6650639 6650626 See Section H for more Cargo Storage Solutions. 8850641
9420022
WWW.TEXTRAIL.COM
F-6
C H E M I C A L S & CO AT I N G S
Table Of Contents - Chemicals & Coatings All Purpose Stain Remover Brake Cleaner Brake Fluid Chemicals Cleaner Gear Oil Grease Hardener Lubricants Metal Surface Cleaner Penetrating Oil Pin Stripers Primer Reducer Respirators & Scotch Brite Sealants Hand Towels TexTrail Value Finishes Transmission Fluid Valspar Finishes VHB Tape Warning & Specification Decals G-5 G-3 G-3 G-3 G-5 G-3 G-3 G-6 G-3 G-5 G-3 G-2 G-6 G-6 G-2 G-4 G-5 G-6 G-3 G-6 G-2 G-2
WWW.TEXTRAIL.COM
G-1
C H E M I C A L S & CO AT I N G S
Craftsman
Deluxe
Pin Stripers
Part# 8500079 8500123 8500124
Ref # CRAFTSMAN1 CRAFTSMAN2 DELUXE
Wheel Heads #95 (7/64") #115 (1/8") #16 (1/64") #57 (1/16") #25 (1/32) #73 (3/32) #93 (7/64)
Description Beugler Craftsman Striping Tool Kit with 2-wheel heads, 1-cleaning brush and 2-guide arms Beugler Craftsman Striping Tool Kit with 2-wheel heads, 1-cleaning brush and 2-guide arms Beugler Deluxe Striping Tool Kit with 3-wheel heads, 1-cleaning brush and 3-guide arms
VHB Tape
3M VHB Tapes provide the convenience and simplicity of a tape fastener and are ideal for use in many interior and exterior applications.
Part# 6850007 6850008 6850006 6850001 6850002 6850003 6850005 6850004 6850009 6850010 6850011 6850012 Legend:
Ref # 4611 4611 4622 4622 4622 4622 4624 4624 4941F 4941F 4941F 4941F
Foam Type
Firm Firm Conformable Conformable Conformable Conformable Conformable Conformable Conformable Conformable Conformable Conformable
Color White Dark Gray White White White White White White Gray Gray Gray Gray
Width 1" 1" 0.75" 1" 1" 1" 0.75" 1" 0.75" 0.75" 1" 1"
Thickness 0.045" 0.045" 0.045" 0.045" 0.045" 0.045" 0.062" 0.062" 0.045" 0.045" 0.045" 0.045"
Adhesive
General Purpose General Purpose General / Multi-Pupr General / Multi-Pupr General / Multi-Pupr General / Multi-Pupr General / Multi-Pupr General / Multi-Pupr Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose
Length 36 YDS 36 YDS 36 YDS 36 YDS 36 YDS 36 YDS 36 YDS 36 YDS 36 YDS 36 YDS 36 YDS 36 YDS
Unit of Measure
9-Rolls 9-Rolls 1-Roll 1-Roll 2-Rolls 9-Rolls 1-Roll 1-Roll 12-Rolls 3-Rolls 2-Rolls 9-Rolls
Description 3M VHB High Bond Tape 3M VHB High Bond Tape 3M VHB High Bond Tape 3M VHB High Bond Tape 3M VHB High Bond Tape 3M VHB High Bond Tape 3M VHB High Bond Tape 3M VHB High Bond Tape 3M VHB High Bond Tape 3M VHB High Bond Tape 3M VHB High Bond Tape 3M VHB High Bond Tape
+ General Purpose Acrylic Adhesive: Bonds to most higher surface energy substrates including metal, glass and high surface energy plastics. + Multi-Purpose Acrylic Adhesive: Bonds to a wide range of materials including metals, glass, and high and medium surface energy plastics and paints. This unique adhesive also has the ability to resist the migration of plasticizers in vinyl substrates. + Conformable Foam Type: Provides high strength with the capability while maintaining high internal strength. + Firm Foam Type: Provides the highest level of foam strength in the 3M VHB Tape Family.
8500145
8500146
8500140
8500139
8500143
8500142
Medium Large Ref# Description Welding Half Face piece Respirator Assembly with Particulate Filters 8500144 8500145 7182 2097 Particulate Filter with Nuisance Level Organic Vapor Relief for Welding Half Facepiece Respirator Assembly 100-count 8500146 7184 3M recommended for spray paint applications, with maintenance free design for convenience. Designed to be a truly maintenance free style respirator which is discarded when the organic vapor cartridges are spent. The packout includes the Maintenance Free Half Facepiece Respirator 07192 with permanently attached organic vapor cartridges, 1 pair of filter retainers 7054, and 1 pair of P95 filters 7194. Medium Large Ref# Description Spray Painting Half Facepiece Respirator Assembly with Particulate Filters 8500141 8500142 7192 5P71 Particulate Filter for Spray Painting Half Facepiece Respirator Assembly 100-count 8500143 7194 Designed to help provide comfortable, reliable worker protection for applications such as welding, soldering, cutting, grinding, and sanding. It features the 3M Cool Flow Exhalation Valve, adjustable M-noseclip, and braided headband to help provide a custom fit and secure seal. Per Box Part# Ref# Description Particulate Welding Respirator with Cool Flow Exhalation Valve 80-each 8500139 7189 Scotch-Brite General Purpose Hand Pad 6" x 9" Aluminum Oxide Abrasive Mineral Type 20-each 8500140 7447 Informational & Warning Decals Ref # Part# Type Description Warning 6800079 Safety Chain Warning 6800083 Danger / Caution Notice Warning 6800084 Cylinder Shock Pressure Can Cause Injury Warning 6800100 Danger to Hands & Feet Informational 6800098 Tire & Loading Information Warning 6800002 Do Not Go Under Raised Body
WWW.TEXTRAIL.COM
G-2
C H E M I C A L S & CO AT I N G S
CHEMICALS AND LUBRICANTS
DOT 3 Brake Fluid "DOT 3 Brake Fluid is a fully approved, DOT 3 type motor vehicle brake fluid suitable for use in all vehicles where DOT 3 fluids are recommended. It is suitable for both disc and drum brake systems. Meets or exceeds standards #116 SAE J1703 and ISO 4925." Part# Ref # Type Size Description 6700056 SUS 32 DOT-3 1-QT Brake Fluid 6700055 SUS 33 DOT-3 1-GL Brake Fluid Hi-Temp Red EP Lithium Grease Hi-Temp Red EP Lithium Grease Super S Hi-Temp Red Grease is a NLGI 2, lithium based premium quality, multi-functional grease with outstanding high temperature and extreme pressure characteristics. It provides excellent lubrication over a wide range of operation temperatures and services. Its dropping point exceeds 500F. It also has outstanding lubrication qualities that extend over a wide range of Heavy-Duty/ Fleet applications including wheel bearings (disc and drum), vehicle chassis, boat trailers, universal joints, ball and roller bearings and many others. Super S Hi-Temp Red Grease is well suited for automotive, farm and industrial applications. Part# Ref # Type Size Description 6700047 SUS 67 #2 14-OZ Hi-Temp Red Grease 6700003 SUS 77 #2 1-LB Hi-Temp Red Grease 6700057 SUS 71 #2 35-LB Hi-Temp Red Grease Multi-Purpose (MP2) Lithium Grease Multi-Purpose (MP2) Grease is a NLGI 2, lithium based, water resistant grease for automotive and light to medium trucks, farm and industrial applications. It is recommended for automotive chassis lubrication points, ball joints and universal joints and resists softening at high operating temperatures. It seals out dirt and moisture contamination and protects against rust and corrosion. Part# Ref # Type Size Description 6700048 SUS 66 #2 14-OZ Multi-Purpose Blue Grease Multi-Purpose High Performance GL-5 Gear Oil Formulated for the most severe service conditions and environments in cars, trucks and heavy equipment. It provides excellent load carrying capability, wear resistance, oxidation stability, anti-rust, anticorrosion and anti-foam properties. GL-5 Gear Oil contain sulfur and phosphorus additive materials, but no zinc. Meets Military Specification MIL-L-2105C. Part# Ref # Type Size Description 6700054 SUS 17 80W90 1-QT High Performance GL-5 Gear Oil Multipurpose Dextron / Mercon (D/M) Automatic Transmission Fluid (ATF) Multipurpose D/M ATF is a multipurpose ATF designed for new generation, electronically controlled transmissions. It meets the latest GM Dexron III H Specification. It may also be used in previous transmissions built by General Motors, Daimler Chrysler, Ford (except where Type F required), and most foreign manufacturers, where a Dexron III G, Dexron IIE, Dexron II, Dexron, Mercon, or Type A Suffix A transmission fluid is specified. Part# Ref # Type Size Description 6700060 SUS 126 D/M 1-GL Multi-Purpose Automatic Transmission Fluid Brake Parts Cleaner & Penetrating Oil Non-Flammable Brake Parts Cleaner is a powerful solvent blend that easily removes brake fluid, grease, oil and dirt from brake parts. Penetrating Oil is a multipurpose product formulated to lubricate, penetrate, displace moisture and prevent corrosion. Loosens and frees rusty parts. Part# Ref # Size Description SUS 6700078 18-OZ Non-Flammable Brake Parts Cleaner S107 Penetrating Oil
6700079 SUS S104 11-OZ
WWW.TEXTRAIL.COM
G-3
C H E M I C A L S & CO AT I N G S
CHEMICALS AND LUBRICANTS CONTINUED
East Texas (Distribution Center) 2424 W Ferguson Rd Mt. Pleasant, TX 75455 888-756-0547 West Texas 12506 West I-20 East Odessa, TX 79765 800-333-1745 Florida 5181 North US Hwy 441 Ocala, FL 34475 800-259-8712 Oklahoma 300 Industrial Rd Madill, OK 73446 877-795-3138 Georgia 502 Midway Rd Cordele, GA 31015 877-224-1520
6700046
9420030
9420031
Tube Lube Grease Gun & Refill Cartridges Part# 9420030 9420031 6700046 Part# 9420028 Ref # 96-30132 96-30192 11300 Ref # 70-025 Size 3600 PSI 4500 PSI 3-OZ Description Deluxe Threaded Steel Post with Zerk Bearing Packer Silicone Sealant TremPro 644 RTV is a one-part, acetoxy silicone sealant. TremPro 644 RTV cures to a flexible rubber when exposed to moisture present in the air. It is specially designed for sealant joints between most non-porous materials such as glass, aluminum, metal and metal alloys. It is easily gunnable over a wide range of temperatures and has excellent adhesion to most common substrates without the use of a primer. It has excellent handling characteristics and tools to a smooth, attractive finish. TremPro 644's superior skin time makes it ideal for OEM and production line uses. Do not use on galvanized steel, lead or copper.
9420028
Description Mini Grease Gun Kit with one 3-OZ Cartridge Mini Grease Gun Kit with one 3-OZ Cartridge 4-Pack Multi-Purpose Lube Grease Bearing Packer
Description TremPro 644 RTV Silicone TremPro 644 RTV Silicone TremPro 644 RTV Silicone TremPro 644 RTV Silicone Mat Spray Glue
WWW.TEXTRAIL.COM
G-4
C H E M I C A L S & CO AT I N G S
CHEMICALS AND LUBRICANTS CONTINUED
Aluminum Cleaner And Brightener Streak Master Aluminum Cleaner And Brightener is the acid brightener of the future and the future is now. It has been developed to improve the safety of those cleaning with traditional aluminum cleaner and brightener (Hydrofluoric Acid Brightener); yet, still have a product that removes road film, grime, algae, scum, lime deposits, water line stains, oxidation, and brightens bare aluminum. Works just like the traditional aluminum cleaner and brightener (Hydrofluoric Acid Brightener) WITHOUT the negative hazards associated with that product. Forget the toxic and poisonous concerns and step up to new technology. Part# 6700052 Ref # SMAB1 Size 1-GL Description Streak Master Aluminum Cleaner & Brightener Black Streak Remover Removes black streaks that have set deep into the paint finish over time on campers, trailers and other equipment. Black Streak Remover is recommend when the stains have gone extremely deep into the paint and have been impossible to remove. After using the black streak remover, you can apply Ultra Guard product to protect the finish and stop streaks from setting in again. Part# 6700051 6700050 Ref # SMKT1 SMBR1 Size 1-GL 1-GL Description Streak Master Black Streak Remover Kit (includes 1-qt spray bottle) Streak Master Black Streak Remover Ultra Guard Wet or Dry Wash Use Streak Master Ultra Guard as Wet Wash or Dry Wash. Dilute Ultra Guard to the desired dilution for any given job. Spray directly to the surface to be cleaned and wipe away grime and stains. With a dry towel, lightly buff to a brilliant clean and shine. Part# 6700053 Part# 6700010 Ref # SMUG1 Ref # 1485412 Size 1-GL Count 72 Description Streak Master Ultra Guard Wet or Dry Wash Hand Towels - Scrubs In-A-Bucket Description Scrubs In-A-Bucket Hand Towels
Valspar's Acrylic/Urethane Hardener is specifically formulated to be used in Valspar's Supreme acrylic finishes. The hardener increases the gloss retention, chip, mar, and chemical resistance of the coating. The urethane hardener improves the production time by significantly improving the properties of the paint in tack free times, water spotting, and recoat times. The hardener is used at an 8 to 1 ratio (1-pint per 1-gallon or 2-quarts hardener to 5-gallons finish). Once the hardener is added to unreduced paint, reduce according to the recommendations using HAP Series Reducers. All mixed material should be used within four hours after mixing. Any material sprayed after four hours may be lower in gloss and will result in poor adhesion to the primer. Clean all equipment immediately after use.
WWW.TEXTRAIL.COM
G-5
C H E M I C A L S & CO AT I N G S
PAINT
Ref# 750N939 750B989 750A939 750A022 750X914 750X902 750G118 750G945 750G040 750A454 750N912 750R948 750R974 750R927 750S926 750W959 750Y902 750Y002 750Y004 Ref# HAP4575 HAP6590 HAP85100 341X017 699C900
Color Beige Black Blue Blue Gray Gray Green Green Green Orange Pewter Red Red Red Silver White Yellow Yellow Yellow Color
Description Arizona Beige Pearl Metallic Acrylic Finish Black Acrylic Finish Indigo Blue Metallic Acrylic Finish Safety Blue Acrylic Finish Storm Gray Pearl Metallic Acrylic Finish Gray Metallic Acrylic Finish Olive Drab Acrylic Finish Amazon Green Metallic Acrylic Finish Implement Green Acrylic Finish Equipment Orange Acrylic Finish Pewter Metallic Acrylic Finish Dark Red Acrylic Finish Victory Red Acrylic Finish Standard Red Acrylic Finish Silver Metallic Acrylic Finish Linen White Acrylic Finish Caterpillar Yellow Acrylic Finish Medium Yellow Acrylic Finish Safety Yellow Acrylic Finish Description Fast Acting Reducer for Cold Weather Medium Acting Reducer for Warm Weather Slow Acting Reducer for Hot Weather Gray Hi-Build Non-Lifting Primer Acrylic Finish Hardener
SPRAY 8500008 8500006 8500028 8500035 8500036 8500034 8500005 8500022 8500073 8500018 8500037 8500007 8500017 8500031 8500033 8500016 GAL 8500002 8500040 8500092
1-GAL 8500084 8500045 8500041 8500052 8500070 8500049 8500004 8500135 8500138 8500068 8500071 8500112 8500044 8500042 8500047 8500053 5-GAL 8500085 -
5-GAL 8500118 8500115 8500083 8500136 8500096 8500082 DRUM 8500094 8500117 8500116 -
Value Finishes
Ref# TT-105 TT-114 TT-139 TT-212 TT-109 TT-108 TT-106 TT-323 TT-1002 TT-1501 Color Black Red Gray Blue Red Yellow White Green Gray Description TexTrail TexTrail TexTrail TexTrail TexTrail TexTrail TexTrail TexTrail TexTrail TexTrail
WWW.TEXTRAIL.COM
1-PINT 8500072
G-6
1-GAL 8500056 8500059 8500060 8500062 8500063 8500064 8500065 8500067 8500066 8500061
2010 Copyright by TexTrail, Inc.
Industrial High Gloss Finish Industrial High Gloss Finish Industrial High Gloss Finish Industrial High Gloss Finish Industrial High Gloss Finish Industrial High Gloss Finish Industrial High Gloss Finish Industrial High Gloss Finish Industrial Primer Industrial Catalyst Hardener
B O DY & F R A M E
Table Of Contents - Body & Frame Air Conditioning Aluminum Box (Underbody, Tongue & Specialty) Aluminum Trim Ball Corners Box (Aluminum & Powder Coated Underbody & Tongue, Specialty) Caps for Gate Ramp Assemblies Ceiling Heat & Air Units Chrome Edge Trim "D" Bumpers Drill Bits Dump Tarp Kits Edge Guard Electric Fan Fenders Floor Screws Gate Lift Assist Generators Gravel Guard Gussets Heating Units Hydraulic Hoist Systems Light Protectors & Brackets Liquid Storage Tanks Mud Flaps Nose Bows Nose Caps Pipe Bows Powder Coated Box (Underbody, Tongue & Specialty) RACK-EM Double Barrel Gate Lift Assist Ramps Ramp Gate Assemblies Ramp Springs Rivets & Rivet Tools Rockshield Roof Bows (Round Pipe) Roof Bows (Square Tube) Roof Caps Rubber Mats Rumber Products RV Generators Self Tapping Torx Head Floor Screws Single Axle Fenders & Fender Backs Slats Specialty Box Springs for Ramps Stake Pocket Straps Tandem Axle Fenders & Fender Backs Tarp Kits Tongue Box Torx Head Self Tapping Floor Screws Torx Screw Bits & Holder Tradesman Boxes Trim Truck-Tack Boxes Triple Axle Fenders & Fender Backs Underbody Box Vents Water Caddy Water Cooler Rack Wedge Caps H-7 H-17 H-8 & H-9 H-5 H-17 H-15 H-7 H-8 & H-9 H-12 H-16 H-19 H-6 H-7 H-2 H-10 H-14 H-8 H-6 H-6 H-7 H-19 H-7 H-18 H-12 H-5 H-5 H-6 H-17 H-14 H-14 H-15 H-16 H-10 H-6 H-6 H-5 H-5 H-12 H-11 H-8 H-10 H-2 H-5 H-18 H-15 H-16 H-19 H-3 H-19 H-17 H-10 H-10 H-18 H-8 & H-9 H-17 H-4 H-16 H-8 H-13 H-13 H-5
WWW.TEXTRAIL.COM
H-1
B O DY & F R A M E
SINGLE FENDERS
Part# 7050013 7050017 7050022 7050026 7050025 7050103 7050075 7050006 7050029 7050009 7050010
Ref # 10166 11378 10136 10145 11128 10570 10164 10149 10151 10155 10157
Width 7" 7" 8" 9" 9" 9" 9" 9" 9" 10-3/4" 10-3/4"
Single Axle 1" Radius Fenders With 90 Lip Length Height Material Wheel Size Fender Back 21" 6" 16-GA 7050005 28" 10-3/4" 16-GA 13" 7050005 28" 10" 16-GA 13" 7050005 32" 15" 16-GA 15" 7050058 32" 15" 0.100 ATP 15" Included 32" 15" 0.100 ATP 15" 7050058 32" 15" 14-GA TP 15" 7050058 32" 16" 16-GA 16" Included 36" 18" 16-GA 16" 7050087 32" 16" 16-GA 15" 7050058 36" 18" 16-GA 15" 7050087
Notes
Welded Back
Welded Back
Part# 7050008 7050347 7050018 7050019 7050020 7050028 Part# 7050014 7050021 Part# 7050013 7050016 7050024 Part# 7050058 7050005 7050087 7050003 7050065
Ref # 10200 67473 10189 10191 10193 10198 Ref # 10171 20114 Ref # 10166 10169 10143 Ref # 10013 10009 10016 11111 10012
Single Axle 1/2" Radius Both Sides - Square Broke Fender Width Length Height Flat Material 10" 33" 16-1/2" 20" 16-GA 10" 32" 13" 8" 23" 9" 15" 16-GA 8" 26" 10" 17" 16-GA 8" 28" 9" 20" 16-GA 9" 32" 13" 22" 16-GA Single Axle 1" Radius Both Sides Fender Width Length Height Material Wheel Size 7" 28" 10" 16-GA 12" 8" 28" 10" 16-GA 12" Single Axle 1-1/2" Radius Both Sides Fender Width Length Height Material Wheel Size 7" 21" 6" 16-GA 8" 7-1/2" 23-1/2" 6-1/2" 14-GA 12" 9" 29" 8-1/2" 16-GA 13" Single Axle Fender Backs Width Length Material Notes 12" 31" 16-GA 8-1/2" 27" 18-GA 12" 34-1/2" 18-GA Rectangular 6-1/2" 21-3/4" 18-GA 10-1/2" 29-3/4" 18-GA Square Broke
GA = Gauge ATP = Aluminum Tread Plate
H-2
Notes
WWW.TEXTRAIL.COM
B O DY & F R A M E
TANDEM FENDERS
Tandem Axle 1" Radius Fenders With 90 Lip Length Height Material Wheel Size 66" 19-1/2" 16-GA 14" 72" 21" 16-GA 15" 72" 20" 14-GA TP 15" 72" 20-1/2" 16-GA 15" 72" 20-1/2" 16-GA 16"
Part# 7050011
Ref # 10670
Tandem Axle 1" Radius Both Sides Fender With 90 Lip Square Broke Width Length Height Material Fender Back Notes 10-3/4" 72" 21-1/2" 16-GA 7050059
Part# 7050085
Ref # 10330
Tandem Axle 1" Radius Both Sides Fender With 90 Lip Double Square Broke Width Length Height Material Fender Back Notes 9" 72" 17" 14-GA TP 7050064
Tandem Axle 1" Radius Both Sides Tear Drop Fender With 90 Lip Double Square Broke Ref # Width Length Height Material Fender Back Notes 10333 9" 72" 16-1/2" 16-GA 7050067 10335 9" 72" 17" 14-GA TP 7050064 21550 10" 72" 17" 16-GA 7050067 10693 10-3/4" 72" 17" 14-GA TP 7050064 GA = Gauge ATP = Aluminum Tread Plate
WWW.TEXTRAIL.COM
H-3
B O DY & F R A M E
TANDEM FENDERS CONTINUED
Part# 7050052 7050054 7050076 7050033 7050055 7050001 7050044 7050045 7050047 Part# 7050015 Part# 7050088 7050059 7050061 7050063 7050067 7050060 7050062 7050068 7050064
Ref # 10257 10291 10297 11073 10262 10268 10294 10276 10388 Ref # 11472 Ref # 10027 10026 10036 10037 10010 11046 10039 13150 11132
Width 9" 9" 9" 9" 9" 9" 10-3/4" 10-3/4" 13" Width 12" Width 12" 12" 12" 12" 12" 12" 12" 12" 14"
Tandem Axle 1" Radius Tear Drop Fender With 90 Lip Length Height Material Wheel Size Fender Back 66" 19-1/2" 16-GA 14" 7050088 72" 20" 14-GA TP 16" 7050062 72" 20-1/2" 0.100 ATP 16" 72" 20-1/2" 0.100 ATP 15" Included 72" 21" 16-GA 15" 7050060 72" 21" 16-GA 15" Included 72" 20-1/2" 14-GA TP 16" 7050062 72" 21" 16-GA 16" 7050060 72" 20-1/2" 16-GA 16" 7050060 Tandem Axle 1-1/2" Radius Tear Drop Fender With 90 Lip Length Height Material Wheel Size Fender Back 72" 20" 0.090 Smooth Alum Tandem Axle Fender Backs Length Material Notes 63" 18-GA 66-1/4" 18-GA Square Broke 69" 18-GA 69" 18-GA Square Broke Smooth Aluminum 71-3/4" 18-GA Double Square Broke 69" 16-GA 69" 14-GA TP 69" 14-GA TP Rectangle 72" 14-GA TP Double Square Broke GA = Gauge ATP = Aluminum Tread Plate Triple Fenders
Notes
Welded Back
Welded Back
Notes
Part# 7050070
Ref # 10342
Width 9"
Length 108"
Triple Axle 1" Radius Fenders With 90 Lip Height Material 21" 16-GA
Wheel Size
Notes
Triple Axle 1" Radius Tear Drop Fenders With 90 Lip Length Height Material Wheel Size 108" 21" 16-GA 108" 16-GA 108" 21" 14-GA TP 108" 21" 14-GA TP Triple Axle Fender Backs Length Material Notes 105" 18-GA
H-4
Notes
WWW.TEXTRAIL.COM
B O DY & F R A M E
FENDER COMPONENTS
Ball Corners Material 19-GA 19-GA
Steel Nose / Roof / Wedge Caps Width Height Depth 60" 15" 37" 72" 15" 37" 80" 12" 30"
Most Roof Bows are also available Cambered Straight Roof Bows Width 48" 60" 72" 80" 84" 96" 60" 72" 80" 84" 96" 60" 72" 80" 84" Aerodynamic
Part# 7500081 7500072 7500073 7500070 7500071 7500074 7500034 7500036 7500075 7500076 7500077 7500033 7500035 7500078 7500080
Ref # 64177 64127 64137 64087 64097 64157 6412 6413 6408 6409 6415 6410 6411 6407 6416
Height 7" 7" 7" 7" 7" 7" 8" 8" 8" 8" 8" 14" 14" 14" 14"
Radius 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 12" 12" 12" 12"
Tube 1" Square 1" Square 1" Square 1" Square 1" Square 1" Square 1" Square 1" Square 1" Square 1" Square 1" Square 1" Square 1" Square 1" Square 1" Square
Material 16-GA 16-GA 16-GA 16-GA 16-GA 16-GA 16-GA 16-GA 16-GA 16-GA 16-GA 16-GA 16-GA 16-GA 16-GA
WWW.TEXTRAIL.COM
B O DY & F R A M E
Aluminum & Non-Skid Gravel Guard Material Pattern Aluminum Diamond Aluminum Diamond Aluminum Diamond Aluminum Diamond Non-Skid Plain Black Non-Skid Plain Black Non-Skid Plain Black Non-Skid Plain Black
Description Gravel Guard Gravel Guard Gravel Guard Gravel Guard Self Adhesive Gravel Guard Self Adhesive Gravel Guard Self Adhesive Gravel Guard Self Adhesive Gravel Guard
7500015
5350247
5350245
Part# 5350245 5350244 5350384 5350247 7500180 7500015 7500008 7500182 Part# 7500090 7500085 7500091 Part# 5350179 5350180 5300008 5300004 5300005 5350170 5350171 5300001 5300002 5350023 5350024 5300003
Ref # 11189 78127 11197 11196 22130 22140 22150 22170 Ref # 64172 64315 64496 Ref # 71610RH 71610LH 11701LR 11324LH 11324RH 111810LH 111810RH 1534GL 1534GR 2034LH 2034RH 2430G
Length 76" 76" 83" 83" Per Foot Per Foot Per Foot Per Foot Tall 78" 80" 84"
Rockshield & Edge Guard Height Material 36" 0.063 Alum 35" 12-GA Smooth 43-1/2" 0.063 Alum 43-1/2" 12-GA Smooth 3/32" Flexible PVC 1/8" Flexible PVC 1/8" Flexible PVC 3/16" Flexible PVC Pipe Roof Bows Width Radius 72" 6" 80" 6" 84" 6" Gussets
Description Aluminum Diamond Plate Rockshield Steel Rockshield Aluminum Diamond Plate Rockshield Steel Rockshield Durable Clip-on Black Edge Trim Durable Clip-on Black Edge Trim Durable Clip-on Chrome Edge Trim Durable Clip-on Black Edge Trim Pipe 1-5/8" 1-5/8" 1-5/8" Material 16-GA 16-GA 16-GA
Descriptions 7" x 16-1/16" 10-Gauge Right Hand 7" x 16-1/16" 10-Gauge Left Hand 8-3/4" x 8-3/4" with 1" Lip Left or Right Hand 12-Gauge 10" x 8" with 1-1/2" Lip Left Hand 14-Gauge Tread Plate 10" x 8" with 1-1/2" Lip Right Hand 14-Gauge Tread Plate 11-1/4" x 18-1/2" 10-Gauge Left Hand 11-1/4" x 18-1/2" 10-Gauge Right Hand 15" x 34-3/16" with 1" Lip Left Hand 15" x 34-3/16" with 1" Lip Right Hand 20" x 34" x 3/16" Left Hand 20" x 34" x 3/16" Right Hand 24" x 30" x 1/4" Flat without Lip
H-6
WWW.TEXTRAIL.COM
B O DY & F R A M E
8100148
8100149
5350211
5350210
5350085
5350082
5350371
5350392
Light Mounting Brackets / Protectors Description Left Hand Stop, Tail & Turn Light Protector Bracket Steel without License Light Right Hand Stop, Tail & Turn Light Protector Bracket Steel with License Light Left Hand Oval Stop, Tail & Turn Light Protector Bracket Steel with 2" Side Marker Hole Right Hand Oval Stop, Tail & Turn Light Protector Bracket Steel with 2" Side Marker Hole Stop, Tail & Turn Light / License Plate Bracket 5-3/4" x 7-3/4" Stop, Tail & Turn Light Protector Bracket Clearance Marker Light Bracket 5" Clearance Marker Stud Mounted Light Bracket Heavy Duty 12V 2-Speed Chrome Fan
Part# 8720010
Ref # 850
Description Heavy Duty 12V 2-Speed Chrome Fan with Swivel Base
Air Conditioning / Heat Pump Units & Ceiling Units Part# 7330002 7330003 7330004 7330001 7330005 Ref # 468-4 468 468-8 469-11 469-2 Description 15,000 BTU Air Conditioning / Heat Pump Outside Roof Unit with Air Sweep* / Air Shower** features. White Color. 13,500 BTU Air Conditioning Outside Roof Unit with Slinger features that minimize condensation run-off. White Color. 15,000 BTU Air Conditioning Outside Roof Unit with Slinger features that minimize condensation run-off. White Color. Air Conditioning / Heat Pump Ceiling Unit with Slinger features that minimize condensation run-off. White Color. Compatible only with the 7330002 Outside Roof Unit. Air Conditioning Ceiling Unit with 5,600 BTU Heat Strip. Features Air Sweep*/Air Shower**. Compatible only with the 7330003 and 7330004 Outside Roof Units.
WWW.TEXTRAIL.COM
H-7
B O DY & F R A M E
RV MicroQuiet Generators Part# 7230003 7230004 Ref # 36KYFA 40KYFA Fuel Gasoline LP Hz 60 60 RPM 3600 3600 Watts Voltage Amps Phase Circuit Breaker 3600 4000 120 120 33.3 30.3 1 1 30A 1-Pole 30A 1-Pole
7230003
RV MicroQuiet Generators provide an exceptionally smooth and quiet operation. Quieter than the National Park Sound Level Standards. It is lightweight and compact fully housed with a enclosed muffler. It features a Microprocessor Control with diagnostics and an overhead valve engine for efficiency with no decarboning required. Its connectors are sealed. Available 3.6 KY or 4.0 KY as indicated above. 7230005 3164 Generator Tailpipe Kit 7230016 2845 Generator Tailpipe Kit Round Butterfly Vent Size Finish Description 7-1/2" Aluminum Round Butterfly Vent Pop-Up 2-Way Trailer Vents Type Finish Description Pop-Up Black Steel Vent with Gasket & Screen Pop-Up Aluminum Steel Vent with Gasket & Screen Plastic Black Trim Ring for 7500055 & 7500061 Dome Style Vents Type Finish Description Dome Vent 14x14 without Garnish Dome Vent 14x14 without Garnish with 12-Volt Fan Vent Cover Galvanized 14x14 Dome Vent Vent Cover White Plastic 14x14 Dome Vent Vent Garnish 1-7/8" to 3" Roof Dome Vent 14x14 White Crank Top with Screen Dome Vent 14x14 Metal Crank Top with Screen White Chrome Edge Trim - Durable & Flexible PVC Fits Description 1/8" Self-Adhesive Chrome Edge Trim Aluminum V-Trim Width Length Description 1-1/8" 12' Aluminum "V" Trim Chrome Trim with Lip Width Length Description 1" Per Foot Chrome Trim with Lip* 1-1/4" Per Foot Chrome Trim with Lip 1-5/8" Per Foot Chrome Trim with Lip * Same measurements except width as 7500052.
WWW.TEXTRAIL.COM
H-8
7230005
Part# 7500057 Part# 7500055 7500061 7500215 Part# 8290002 8290003 8290004 8290005 8290006 8290098 8290097 Part# 7500008 Part# 7500013 Part# 7500050 7500052 7500131
Ref # 6501 Ref # 6265 6260 626T Ref # 2051 2158 1647 1646 2185 1659 1660 Ref # 18ET Ref # 118V Ref # 1923 1924 2625
7500057
7500055
8290004
7500008 7500013
7500052
7500131
B O DY & F R A M E
Part# 7500049 7500194 Part# 7500053 Part# 7500038 7500039 Part# 7500045 7500051 7500014 7500028 7500065 7500054 7500064 7500027 7500026
Chrome Flat Trim Ref # Width Length Description 6439 1-3/8" Per Foot Flat Aluminum Chrome Trim 4681 1" Per Foot Flat Aluminum Chrome Trim with Lip Polished Gravel Plate Trim Ref # Width Length Description 213 3/4" Per Foot Aluminum Gravel Plate Trim Polished Drip Rail Trim Ref # Width Length Description 688 3/4" Per Foot Aluminum Drip Rail Trim 788 1-1/4" Per Foot Aluminum Drip Rail Trim Polished Slot Series Insert Trim & Vinyl Inserts Ref # Width Length Description 1904 1-1/4" Per Foot Aluminum Uneven Lip Insert Trim 2605 1-1/4" Per Foot Aluminum Even Lip Insert Trim 3590 1-1/4" Per Foot Aluminum Uneven Lip Insert Trim 17BK 1" Per Foot Black Vinyl Trim Insert 17CB 1" Per Foot Brown Vinyl Trim Insert 17CW 1" Per Foot White Vinyl Trim Insert 17DB 1" Per Foot Blue Vinyl Trim Insert 17RD 1" Per Foot Red Vinyl Trim Insert 17SG 1" Per Foot Silver Grey Vinyl Trim Insert Inserts available in 750' Rolls Mill Finished Wall Board Trim Ref # Width Length Description 14287 0.800" Per Foot Wall Board Mill Finished Trim Mill Finished Floor / Wall Trim Ref # Width Length Description 9144 3/4" Per Foot Floor / Wall Trim - Aluminum Angle Edge Guard Material Description Flexible PVC Durable Clip-on Black Edge Trim Flexible PVC Durable Clip-on Black Edge Trim Flexible PVC Durable Clip-on Chrome Edge Trim Flexible PVC Durable Clip-on Black Edge Trim
7500049 7500194
7500053
7500038
7500039
7500045
7500051
7500014
INSERTS
7500204 7500048
7500015
WWW.TEXTRAIL.COM
H-9
B O DY & F R A M E
Torx Screwdriver Bit and Holder Part# Ref # Size Description 9420055 T14 Screw Bit Holder for Torx Driver 1/4" Drive 9420053 T25 1/4" Torx Hex Screw Bit for 3/16" Drive 7030163 T30 1/4" Torx Hex Screw Bit for 1/4" Drive 9420054 T40 5/16" Torx Hex Screw Bit for 1/4" Drive Torx Head Floor Screws Part# Ref # Size Length Description 7030063 1420100 1/4"-20 1" Self Tapping Torx Head Screw 7030057 1420150 1/4"-20 1-1/2" Self Tapping Torx Head Screw 7030053 1420200 1/4"-20 2" Self Tapping Torx Head Screw 7030058 1420225 1/4"-20 2-1/4" Self Tapping Torx Head Screw 7030170 1420250 1/4"-20 2-1/2" Self Tapping Torx Head Screw 7030059 1420300 1/4"-20 3" Self Tapping Torx Head Screw 7030060 5160250 5/16"-18 2-1/2" Self Tapping Torx Head Screw 7030061 5160300 5/16"-18 3" Self Tapping Torx Head Screw Rivets and Rivet Guns For use on copper, brass, tin, lead, steel, aluminum, pewter and zincvirtually any material! Rivets won't easily rust or corrode or come loose. Kit includes heavy-duty rivet gun, powerful enough to do jobs fast. Gun has non-rust zinc alloy die-cast body with strong drop-forged handles and rubberized grips. Chain lock keeps handles closed. Durable fulcrum pin. Also included are 4 speciallyhardened nosepieces for 3/32", 1/8", 5/32" and 3/16" diameter rivets. Nosepieces store in gun. Easy-to-handle gun weighs less than 1-1/2 lbs Part# Ref # Diameter Hole Size Drill Hole Length Grip 7030316 AA42D 1/8" .129-.133 9/64" 0.265 .032-.125 7030315 AA44D 1/8" .129-.133 9/64" 0.390 .188-.250 7030314 AA45D 1/8" .129-.133 9/64" 0.515 .251-.312 7030313 AA46D 1/8" .129-.133 9/64" 0.515 .313-.375 7030312 AA48D 1/8" .129-.133 9/64" 0.640 .376-.500 7030311 AA54D 5/32" .160-.164 11/64" 0.465 .188-.250 7030310 AA56D 5/32" .160-.164 11/64" 0.540 .251-.375 7030309 AA64D 3/16" .192-.196 13/64" 0.440 .126-.250 7030308 AA64LF 3/16"x5/8" .192-.196 13/64" 0.440 .126-.250 7030307 AA68 3/16" .192-.196 13/64" 0.565 .251-.375 7030306 SS66D 3/16" SS .192-.196 13/64" 0.565 .251-.375 7030305 AA66LF 3/16"x5/8" .192-.196 13/64" 0.565 .251-.375 7030300 AA68D 3/16" .192-.196 13/64" 0.690 .376-.500 7030301 AA610 3/16" .192-.196 13/64" 0.815 .501-.625 7030302 AA610LF 3/16"x5/8" .192-.196 13/64" 0.815 .501-.625 7030303 AA612 3/16" .192-.196 13/64" 0.940 .626-.750 7030304 AA612LF 3/16"x5/8" .192-.196 13/64" 0.940 .626-.750 Part# Ref # Description 9420052 8550 Heavy Duty Manual Rivet Tool 9420036 5205 Economy Manual Rivet Tool
WWW.TEXTRAIL.COM
H-10
9420055
Torx Bit
B O DY & F R A M E
FLOORING
Rumber is a extremely tough and durable material that is easy to clean and is perfect for trailer flooring and extreme conditions. It is stronger than other composites, is impervious to water, and is UV resistant. Rumber boards will not crack, rot, or split making your investment last longer. Rumber is environmentally friendly material, a natural choice for a number of specialized projects. It is the most cost-effective option to flooring.
Rumber Trailer Flooring 2" x 8" Tongue & Groove Traction Surface Rumber Flooring 2" x 8" Tongue & Groove Traction Surface Rumber Flooring 2" x 8" Tongue & Groove Traction Surface Rumber Flooring 2" x 8" Tongue & Groove Traction Surface Rumber Flooring 2" x 8" Tongue & Groove Traction Surface Rumber Flooring 2" x 8" Tongue & Groove Traction Surface Rumber Flooring 2" x 8" Tongue & Groove Traction Surface Rumber Flooring 2" x 6" Tongue & Groove Board Surface Rumber Flooring 2" x 6" Tongue & Groove Board Surface Rumber Flooring 2" x 6" Tongue & Groove Board Surface Rumber Flooring 2" x 6" Tongue & Groove Board Surface Rumber Flooring Rumber Wall Liner 7040010 200 48" x 96" x 0.200 4' x 8' x 3/16" Textured Black Rumber Wall Liner Sheet 7040011 250 48" x 96" x 0.250 4' x 8' x 1/4" Textured Black Rumber Wall Liner Sheet 7040012 350 48" x 96" x 0.350 4' x 8' x 11/32" Textured Black Rumber Wall Liner Sheet Rumber Wheel Chocks 7040013 4121-8 8" Wheel Chock with Eye 7040014 4121-8H 8" Wheel Chock with Handle Rumber Horse Trailer Accessories 7040015 9901-0 Black Textured Saddle Rack - No Holes 7040016 44618 4"W 29-1/2" Black Bridle Hook Rack 8-Hooks 7040017 20021 7"H x 6"D 17" Black Brush Tray 7040018 20022 7"H x 6"D 27" Black Brush Tray Rumber Materials Installation Guidelines Application Rumber Part Number Centers Screws Miscellaneous Truck / Platform Beds 9102, 9302 & 9502 Maximum 12 2 Tongue & Groove must be tightly engaged. Livestock / Horse Trailers 9102, 9302 & 9502 Maximum 15 2 Tongue & Groove must be tightly engaged. Trailer Ramps 9806 & 9808 Maximum 12 2 Tongue & Groove must be tightly engaged. Cargo Van / ATVs 9805, 9807 & 9808 Maximum 12" 2 Shiplap must be engaged Utility Under 14,000 GVW 9102, 9302 & 9502 Maximum 12" 2 Tongue & Groove must be tightly engaged. Utility Over 14,000 GVW 9102, 9302 & 9502 Maximum 9" 2 Tongue & Groove must be tightly engaged.
Rumber is available in various sizes and textures. Contact your TexTrail Sales representative for complete installation requirements.
Part# 7040030-06 7040030-07 7040030-08 7040030-10 7040030-16 7040030-20 7040030-24 7040033-06 7040033-07 7040033-16 7040033-20
Ref # 9102 9102 9102 9102 9102 9102 9102 9501 9501 9501 9501
1.5" x 7" 1.5" x 7" 1.5" x 7" 1.5" x 7" 1.5" x 7" 1.5" x 7" 1.5" x 7" 1.5" x 5.5" 1.5" x 5.5" 1.5" x 5.5" 1.5" x 5.5"
6' 7' 8' 10' 16' 20' 24' 6' 7' 16' 20'
WWW.TEXTRAIL.COM
H-11
B O DY & F R A M E
RUBBER MATTING
Diamond Plate
Ribbed Pattern
Flat Mat
Part# 8700018 8700011 8700001 8700002 8700003 8700004 8700015 8700016 8700010 8700013 8700007 Part# 8700021 8700019 8700020 8700009 Part# 8700028 Part# 6700027 Part# 7500237 7500009 7040009
Ref # 9148 9147 9020 9035 9040 3640 9045 4871 4712 4812 5712 Ref # 106196 31628 31631 4850 Ref # 121641 Ref # CO12 Ref # 100578 100579 200096
Rubber Floor & Wall Mats Length Description 60" Diamond Plate Pattern Rubber Floor Mat 84" Diamond Plate Pattern Rubber Floor Mat Per Foot Ribbed 1"W Tapered Rib with 3/4"W Valleys Floor Mat Per Foot Ribbed 1"W Tapered Rib with 3/4"W Valleys Floor Mat Per Foot Ribbed 1"W Tapered Rib with 3/4"W Valleys Floor Mat Per Foot Ribbed 1"W Tapered Rib with 3/4"W Valleys Floor Mat Per Foot Diamond Plate Pattern Rubber Floor Mat 71" Flat Rubber Floor Mat 84" Flat Rubber Floor Mat 96" Flat Rubber Floor Mat 84" Flat Rubber Floor Mat Rubber Wall Mats Thickness Width Length Description 3/16" 53-1/4" 72" Rubber Wall Mat 3/16" 28" Per Foot Textured Rubber Wall Mat 3/16" 31" Per Foot Textured Rubber Wall Mat 3/16" 48" Per Foot Textured Rubber Wall Mat Rubber Ramp Mat Thickness Width Length Description 1/4" 48" Per Foot Ribbed Rubber Ramp Mat Rubber Mat Glue Size Description 15-OZ Red Spray Mat Glue Pre-Drilled Rubber Bumpers A B C D E* F* Bolt Size Description 2" 96" 2" 11-1/2" 5/8" 8 3/8" Rubber "D" Bumper 3" 96" 4" 11" 1-1/8" 8 9/16" Rubber "D" Bumper 3" 96" 4" 11" 1-1/8" 9 9/16" Rumber Grooved Surface "D" Bumper
Thickness 1/2" 1/2" 5/16" 5/16" 5/16" 5/16" 5/16" 1/2" 1/2" 1/2" 1/2"
Width 48" 48" 24" 30 34" 36" 36" 48" 48" 48" 60"
7500009
Size
7-1/8" x 1" 7-1/8" x 1" 7-1/8" x 1" 7-1/8" x 1" 19" x 24" 24" x 30" 24" x 30" 1/4" X 3"
Mud Flaps Description Dual Powder Coated Mud Flap Bracket Set 19" Single Powder Coated Mud Flap Bracket Set 12-1/4" Single Powder Coated Mud Flap Strap 12-1/4" Dual Powder Coated Mud Flap Strap 19" Rubber Mud Flap Rubber Mud Flap 3/16" Rubber Mud Flap 23" Mud Flap Mounting Bracket
H-12
WWW.TEXTRAIL.COM
B O DY & F R A M E
FRAME AND BODY COMPONENTS The 7500059 fits conveniently in the corner of your walk-in-tack room utilizing the dead space. It features a fill hole with a vent at the top of the tank for easy filling. Located at the bottom the tank is a shut off valve to hook your hose to for filling water buckets. The optional stand (7500058) will place the tank higher for easier access to the shut off valve and compartment for out-of-the-way storage of your hose.
Water Caddy Ref # Thickness Width Length Description SL-25 1/2" 48" 60" 25-Gallon Corner Water Caddy 14.5" x 56" 3-Sided SL-STD 1/2" 48" 84" 11-1/2" Water Caddy Stand with Storage Compartment Landscape Boxes Ref # Height Depth Length Description 242464 24" 24" 64-1/2" Painted Landscape Box for 5' Wide Trailers 242481 24" 24" 81-1/2" Painted Landscape Box for 6-1/2' Wide Trailers 242487 24" 24" 87-1/2" Painted Landscape Box for 7' Wide Trailers See Cargo Control Section for more Landscape & Trailer Accessories (Hooks, Racks, etc).
Aluminum Portable Ramps Capacity Description 1.5K Aluminum Bi-Fold Ramp 1K Aluminum Tri-Fold Ramp 1.5K Arched Pair Aluminum Ramps
Water Cooler Rack Part# 6080003 Ref # 8500 Description Weldable Water Cooler Rack
WWW.TEXTRAIL.COM
H-13
B O DY & F R A M E
RAMPS AND LIFT ASSISTS
7180005 7180030 7180006
7180007
7180009
Part# 7180005 7180006 8600008 7180022 7180014 7180007 7180013 7180012 7180010 7180011 7180009 7180030
Ref # RA1548 RF1148 RF1160 RF2060 RF2096 RCH1587 RCH1596 RC1587 RT1472 RT1584 RFU1860 RFU1560
Width 15" 11" 11" 20" 20" 15" 15" 15" 14-1/2" 15" 18" 15"
Depth 3" 2" 2" 2" 2" 3" 3" 3" 2" 17"@Heel 3"
Length 48" 48" 60" 60" 96" 87" 96" 87" 72" 84" 60" 60"
Description Black Painted Angle Ramp with 1-1/2" Lip Black Painted Formed Ramp 1/8" Diamond Plate Black Painted Formed Ramp Diamond Plate w/ Stiffeners Black Painted Formed Ramp 1/8" Diamond Plate Black Painted Formed Ramp 1/8" Diamond Plate Black Painted Channel Ramp with Hooks Black Painted Channel Ramp with Hooks Black Painted Channel Ramp with Plate 1-1/2" Lip Black Painted Tube Ramp with 1-3/4" Lip Black Painted Tube Ramp with Plate Black Painted Heavy Duty Fold-Up Ramp Black Painted Fold-Up Channel Ramp with Adjustable Leg
Double Barrel Chain Driven Trailer Gate Assist has a unique two spring design for extra power. Raise and lower your trailer tail gate with just one finger!! Shortest unit on the market, takes the least amount of railspace. Lowest price tail gate assist in its class. Reduces 134 pound gate to less then 5 pounds.
7180120
Part# 7180120
Ref # RA-27
Rail Space Description 10" - 15" Chain Driven Double Barrel Trailer Gate Assist
WWW.TEXTRAIL.COM
H-14
B O DY & F R A M E
RAMP GATE ASSEMBLIES
7180018 7180019
Part# 7180015 7180056 7180018 7180019 7180017 7180023 7180055 Part# 3670021 4000002 5350061 7300029 7300030 7300031 7300043 7400001 7400008 5350260 8200027 8530001 8530002 8530003 5350253 8530004 8530005 8530006 8530007 8600006 8600007 Part# 7180020 7180059 7180118 7180060 7180019-02 7180119 7180019-03 7180054 7180016 7180061 7180038 7180117
Ref # RGA5038 RGA6039 RGA6051 RGA7751 RGA8351 RGA8351 RGA8365 Ref # 2134 8807 7818 66010 83910 781 771 14001 1808 5357 2595 CP1211 CP1251 CP2381 CP2382 CP2781 CP2116 CP2018 CP3316 RS375 RS437 Ref # RG5451 RG6027 RG6051 RG7727 RG7736 RG7751 RG7760 RG7765 RG7839 RG8327 RG8351 RG8351
Height Description 38" Painted Rampgate Assembly 36" Painted Rampgate Assembly 51" Painted Rampgate Assembly 51" Painted Rampgate Assembly 51" Painted Rampgate Assembly 51" Painted Rampgate Assembly with Integrated Ramps 65" Painted Rampgate Assembly Ramp & Ramp Gate Assembly Installation Components Description
Rampgate Pipe Hinge 6"L x 3/4"ID Round Bar 3/4" OD x 10" Long Rampgate Latch Bracket 3/16" x 2-1/2" x 2-1/2" Linch Pin 7/16" x 1-3/4" Long Yellow Zinc Plated Linch Pin 7/16" x 1-3/4" Long with 10" Lanyard Rampgate Pin with Threaded Shank 7/8" x 1-1/8" 9/16" x 1-1/2" Rubber Washer Gasket 1-3/8" OD x 1/8" Rampgate Brass Hinge 25/65" Pin 4" Long Rampgate Butt Hinge 0.207 x 2-1/2" x 2-1/2" 0.089 Gauge Rampgate Handle 3/16" x 1" x 8" Long Latch Assembly 1/2" Spring 3-7/8" Handle Length Zinc Plated Poly Cap Plug 1" X 2" Rectangular 1/16" Poly Cap Plug 1-1/4" x 1-3/4" Rectangular Poly Cap Plug 2-3/8" Round 1/16" Steel Cap Plug 2-3/8" Round 1/8" Poly Cap Plug 2-7/8" Round 1/16" Poly Cap Plug 2" Square x 1/16" Poly Cap Plug 2" Square x 1/8" Poly Cap Plug 3" Square x 3/16" Ramp Spring 3/8" Diam 14-1/4" Long Ramp Spring 7/16" Diam 15-1/2" Long
8530005
5350061
8530003
8530002
5350253
8600006
Width 54" 60" 60" 77" 77" 77" 77" 77" 78" 83" 83" 83"
Height 51" 27" 51" 27" 36" 51" 60" 65" 39" 27" 51" 51"
Replacement Ramp Gates Description Painted Rampgate Primed Rampgate Hinges Loose Primed Rampgate Hinges Loose Primed Rampgate Hinges Loose Painted Rampgate Primed Rampgate Hinges Loose Painted Rampgate Painted Rampgate Painted Rampgate Primed Rampgate Hinges Loose Painted Rampgate Primed Rampgate Hinges Loose
H-15
WWW.TEXTRAIL.COM
B O DY & F R A M E
Part# 7180025 3700001 5350092 5350216 5350219 5350253 5350345 5350346 7030091 8600006
8200034
Ref # TTFURK 2111 42125 81625 38678 CP2382 11195 11325 64315 RS375
Quantity 1 1 1 2 2 2 1 1 2 1
8200033
Ramp & Ramp Gate Assembly Installation Components Description Fold-Up Ramp Hardware Kit Consisting of the following items: Rotator Pipe 1-1/2" Diam x 14-1/4" Long Tailboard Center Link 3/8" x 2-1/8" x 4" Long Tailboard Fixed Link 3/8" x 3" x 8" Long Tailboard Rotating Link 3/8" x 6-7/8" x 9" Long Cap Plug 2-3/8" Round 1/8" Ramp Rod 19-1/2" Long Ramp Rod 32-1/2" Long Roll Pin 3/8" x 2" Long Zinc Plated Ramp Spring 3/8" Diam 14-1/4" Long
8200099
Part# 8200034 8200033 8200003 8200004 8200005 8200027 8200001 8200099 Part# 9250097 9250096 Part# 7180085 7180086 7180150 7180151 7180152 7180153 Part# 7030171 7030172 7030173 7030174 7030175 7030176 7030177 7030178 7030180 7030181 7030179 7030191 7030192 7030193 7030194 7030195 7030196
Latches & Stake Components Description Paddle Handle Tipper Latch Assembly Zinc Plated Weldable Spring Loaded Center Pop-Up Latch 4-Piece Stake Corner Security Latch Set 4-Piece Straight Security Latch Set 4-Piece Rack Corner Connector Set 1/2" Spring Latch Assembly 3-7/8" Handle Length Zinc Plated 1/2" Spring Latch Assembly with Keeper 1/2" Spring Latch Assembly without Keeper 6-1/2" X 1-9/16"Wide Zinc Plated 1-1/2" x 3" Load Plate Stake Pocket Ref # Width Depth Height Gauge Description STK02 3-1/2" 1-1/2" 3" 4 Stake Pocket STK01 3-1/2" 1-1/2" 3" 8 Stake Pocket Ramp Springs - 90 Leg Position Ref # Description SB0230 1-1/2" Max Shaft LH Ramp Spring 0.375 Wire 7180085 SB0230R 1-1/2 Max Shaft RH Ramp Spring 0.375 Wire Ramp Springs - 180 Leg Position RS112L 1-1/2" Max Shaft LH Ramp Spring 0.468 Wire RS112R 1-1/2" Max Shaft RH Ramp Spring 0.468 Wire RS200L 2" Max Shaft LH Ramp Spring 0.500 Wire 7180150 7180152 RS200R 2" Max Shaft RH Ramp Spring 0.500 Wire Drill Bits Ref # Type Diam. Length Twist Description 18JDB Jobber 1/8" 2-3/4" 1-5/8" Drill Bit 532JDB Jobber 5/32" 3-1/8" 2" Drill Bit 1164JDB Jobber 11/64" 3-1/4" 2-1/8" Drill Bit 316JDB Jobber 3/16" 3-1/2" 2-5/16" Drill Bit 1364JDB Jobber 13/64" 3-5/8" 2-7/16" Drill Bit 732JDB Jobber 7/32" 3-3/4" 2-1/2" Drill Bit 14JDB Jobber 1/4" 4" 2-3/4" Drill Bit 38JDB Jobber 3/8" 5" 3-5/8" Drill Bit 532NDB Nitro 5/32" 2-1/16" 1" Drill Bit 316NDB Nitro 3/16" 2-3/16" 1-1/8" Drill Bit 38NDB Nitro 3/8" 3-1/8" 1-13/16" Drill Bit 18SDB Stubby 1/8" 1-7/8" 7/8" Drill Bit 964SDB Stubby 9/64" 1-15/16" 15/16" Drill Bit 532SDB Stubby 5/32" 2-3/16" 1" Drill Bit 1164SDB Stubby 11/64" 2-1/8" 1-1/16" Drill Bit 316SDB Stubby 3/16" 2-3/16" 1-1/8" Drill Bit 1364SDB Stubby 13/64 2-1/4" 1-3/16" Drill Bit Ref # 5240 2598 2589 2588 2591 2595 2595 2575
WWW.TEXTRAIL.COM
H-16
B O DY & F R A M E
TRAILER/TRUCK BOXES
9450565
Part# 9450500 9450501 9450502 9450503 9450504 9450505 9450506 9450507 9450508 9450509 9450510 9450550 9450551 9450552 9450553 9450554 9450555 9450556 9450557 9450558 9450559 9450560 9450561 9450562 9450563 9450565 Part# 9450580 9450581 9450582 9450583 9450585 9450586 9450587 9450588
Ref #
UB151015R UB151024R UB151515R UB151524R UB151530R UB151536R UB151548R UB181824R UB181830R UB181836R UB181848R UB151015T UB151024T UB151515T UB151524T UB151530T UB151536T UB151548T UB181824T UBW181824T UB181830T UB181836T UBW181836T UB181848T UBW181848T UBDD151573T
Type Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Type Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody
Handle SS Rotary SS Rotary SS Rotary SS Rotary SS Rotary SS Rotary SS Rotary SS Rotary SS Rotary SS Rotary SS Rotary SS T-Handle SS T-Handle SS T-Handle SS T-Handle SS T-Handle SS T-Handle SS T-Handle SS T-Handle SS T-Handle SS T-Handle SS T-Handle SS T-Handle SS T-Handle SS T-Handle SS T-Handle
Ref #
ALUB181818R ALUB181824R ALUB181830R ALUB181836R ALUB181818T ALUB181824T ALUB181830T ALUB181836T
14-Gauge Steel Underbody Box Finish Height Depth Powder Coat 15" 10" Powder Coat 15" 10" Powder Coat 15" 15" Powder Coat 15" 15" Powder Coat 15" 15" Powder Coat 15" 15" Powder Coat 15" 15" Powder Coat 18" 18" Powder Coat 18" 18" Powder Coat 18" 18" Powder Coat 18" 18" Powder Coat 15" 10" Powder Coat 15" 10" Powder Coat 15" 15" Powder Coat 15" 15" Powder Coat 15" 15" Powder Coat 15" 15" Powder Coat 15" 15" Powder Coat 18" 18" Powder Coat 18" 18" Powder Coat 18" 18" Powder Coat 18" 18" Powder Coat 18" 18" Powder Coat 18" 18" Powder Coat 18" 18" Powder Coat 15" 15" Aluminum Underbody Box Handle Finish Height Depth SS Rotary Aluminum 18" 18" SS Rotary Aluminum 18" 18" SS Rotary Aluminum 18" 18" SS Rotary Aluminum 18" 18" SS T-Handle Aluminum 18" 18" SS T-Handle Aluminum 18" 18" SS T-Handle Aluminum 18" 18" SS T-Handle Aluminum 18" 18" Underbody Box Mounting Brackets
Width 15" 24" 15" 24" 30" 36" 48" 24" 30" 36" 48" 15" 24" 15" 24" 30" 36" 48" 24" 24" 30" 36" 36" 48" 48" 73" Width 18" 24" 30" 36" 18" 24" 30" 36"
Description Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box White Truck Tack Box Black Truck Tack Box Black Truck Tack Box White Truck Tack Box Black Truck Tack Box White Truck Tack Box White Truck Tack Double Door Box Description Flush Lid Mill Finished Aluminum Box Flush Lid Mill Finished Aluminum Box Flush Lid Mill Finished Aluminum Box Flush Lid Mill Finished Aluminum Box Flush Lid Mill Finished Aluminum Box Flush Lid Mill Finished Aluminum Box Flush Lid Mill Finished Aluminum Box Flush Lid Mill Finished Aluminum Box
Description 15" Underbody Box Bracket 18" Underbody Box Bracket 14-Gauge Tongue Boxes Finish Height Depth Aluminum 21" 16" Powder Coat 20" 16"
9450603
Ref #
ALTGBX PCTGBX
Description Tongue Box Aluminum 33"W in Back Tongue Box Black Steel 33"W in Back
WWW.TEXTRAIL.COM
H-17
B O DY & F R A M E
TRAILER/TRUCK BOXES CONTINUED
9450700
9450701
9450702
9450703
Ref #
PCACRSB PCTMSB PCGBX PCGBX
14-Gauge Steel Specialty Boxes Finish Height Depth Width Powder Coat 18" 25-1/2" 68-1/2" Powder Coat 8" 20" 60" Powder Coat 13" 14-1/2" 36" Powder Coat 13" 14-1/2" 48"
Description Black Steel Across The Bed Box Black Steel Top Mount Shovel Box Black Steel Lightweight Gear Box Black Steel Lightweight Gear Box
6450601
9450600
9450602
Ref #
STOW RKMTAB RKMTAB
Aluminum Specialty Boxes Finish Height Depth Width Description Aluminum 17" 20" 48" Stowaway Box Aluminum 13" 12" 36" Rack Mount Aluminum All Terrain Box Aluminum 8" 12" 36" Rack Mount Aluminum All Terrain Box
9450098
9450099
9450096
Ref #
TST21TTB TST21TTBBK TST16TTB TST16TTBBK
22-Gauge Steel Tongue Boxes Finish Height Depth Powder Coat 23" 15" Powder Coat 23" 15" Powder Coat 18-3/4" 19" Powder Coat 18-3/4" 19"
Description White Tradesman Tongue Box 34"W in Back Black Tradesman Tongue Box 34"W in Back White Tradesman Tongue Box 34"W in Back Black Tradesman Tongue Box 34"W in Back
9450160
9450161
Ref #
TALVST50 TALVST50BK
Liquid Storage Tanks Finish Height Depth Aluminum 19" 14" Aluminum 19" 14"
H-18
Width Description 64" Brite Finish Tradesman Liquid Storage Tank 64" Black Tradesman Liquid Storage Tank
2010 Copyright by TexTrail, Inc.
WWW.TEXTRAIL.COM
B O DY & F R A M E
Part# 6900203 6900201 6900210 6900202 6900209 6900211 6900200 Part# 6900206 6900204 6900207 6900205 Part# 9250321 9250322 9250323 9250118 9250324 9250119
Ref # DTR5012 DTR6014 DTR6515 DTR7012 DTR7015 DTR7515 DTR8022 Ref # 3011034 3009455 3011036 3009892 Ref # RTS9 RTS15 RTS21 RTS21H RTS31 RTS31H
Type Mesh Mesh Mesh Mesh Mesh Mesh Mesh Type Mesh Mesh Mesh Mesh Type Rubber Rubber Rubber Rubber Rubber Rubber
Width 5' 6' 6-1/2' 7' 7' 7-1/2' 8' Width 5' 6' 7' 8' Length 9" 15" 21" 21" 31" 31"
Dump Tarp Kits Length Hardware Description 12' Included Dump Tarp & Hardware Kit 14' Included Dump Tarp & Hardware Kit 15' Included Dump Tarp & Hardware Kit 12' Included Dump Tarp & Hardware Kit 15' Included Dump Tarp & Hardware Kit 15' Included Dump Tarp & Hardware Kit 22' Included Dump Tarp & Hardware Kit Replacement Dump Tarps Length Description 12' Dump Tarp Only 14' Dump Tarp Only 12' Dump Tarp Only 22' Dump Tarp Only Dump Tarp Straps Description Tarp Strap Tarp Strap Tarp Strap Heavy Duty Tarp Strap Tarp Strap Heavy Duty Tarp Strap
6900071
6900061
Please Call Your Local TexTrail Trailer Parts Representative For Hoist Replacement Parts
Hydraulic Hoist Kits
Part# 6900078 6900075 6900072 6900069 6900061 Part# 6900080 6900079 6900076 6900077 6900073 6900074 6900070 6900071
Ref # PH-310 PH-416 PH-516 PH-625 PH-630 Ref # DB-1650-25 TH-3512 DB-1650-25 DB-1650-32 DB-1650-25 DB-1602-32 DB-1639-32 DB-1639-32
Description Hoist Kit with Hinges & Prop Assy Hoist Kit with Hinges & Prop Assy Hoist Kit with Scissor Lift, Hinges & Prop Assy Hoist Kit with Hinges & Prop Assy Hoist Kit with Scissor Lift, Hinges & Prop Assy Hydraulic Hoist Power Units Use With Description PH-310 Power Unit Package with 88" Hose & Fittings PH-310 Power Unit Package with 88" Hose & Fittings PH-416 Power Unit Package with 98" Hose & Fittings PH-416 Power Unit Package with 125" Hose & Fittings PH-516 Power Unit Package with 125" Hose & Fittings PH-516 Power Unit Package with 132" Hose & Fittings PH-625 Power Unit Package with 96" Hose & Fittings PH-625 Power Unit Package with 125" Hose & Fittings
Reservoir 4-QT Poly Offset 4-QT Poly Offset 4-QT Poly Offset 4-QT Poly Offset 4-QT Poly Offset 8-QT Poly Offset 4-QT Poly Offset 4-QT Poly Offset
WWW.TEXTRAIL.COM
H-19
B O DY & F R A M E
Heavy-duty double stitch hem. All hems reinforced with nylon webbing Full perimeter brass grommets Cast bearings and zinc plated hardware Extruded aluminum cross bars telescope exact bed width of dumps & trailers up to 102 wide. Folding crank handle with detent latch. 22 pull rope included
WWW.TEXTRAIL.COM
H-20
H A R D WA R E & LO C K S
Table Of Contents - Hardware & Locks Back-Up Assist Camera Bar Lock Assembly Bumpers Butt Hinge Butterfly Latch Cab Lock Handles Cab Slam Locks Cam Lock Assembly Cap Plugs Catch / Pull Latch Chains Continuous Hinges Dead Bolt Flush Latch Door Holdbacks Door Holders Drill Bits D-Rings "D" Bumpers Flush Latches Flush Mount Hinges Handles (Cab Lock) Handles (Grab) Hasp Hinge Pin Hinges Hitch Pins Hood Latch Hooks Latches Linch Pins Links Locks Paddle Latches Pins (Hitch, Linch & Snapper) Receiver Hitch Pins Receiver Locks Rivets & Rivet Tools Rope Rings Rubber Bumpers Safety Chains Slam Locks Snapper Pins Spare Tire Carrier / Mount Spring Loaded Latches Stake Components Stake Pocket Steps (Folding & Weld-On) Strap Hinges Suitcase Latch T-Handle Latches Tie Loops Tipper Latch Torx Head Self Tapping Floor Screws Torx Screw Bits & Holder Towing Mirror
WWW.TEXTRAIL.COM
J-1
J-12 J-5 J-11 J-3 J-9 J-5 J-5 J-5 J-11 J-9 J-17 J-3 J-4 J-6 J-6 J-11 J-7 J-11 J-4 J-3 J-5 J-2 J-5 J-3 J-2 J-8 J-4 J-8 J-4 & J-9 J-9 J-8 J-12 J-4 J-8 & J-9 J-8 J-12 J-10 J-7 J-11 J-18 J-5 J-9 J-2 J-9 J-11 J-10 J-2 J-3 J-9 J-4 J-9 J-9 J-10 J-10 J-2
2010 Copyright by TexTrail, Inc.
H A R D WA R E & LO C K S
Towing Mirror Part# Ref # Description
8850200
3096
Description Stainless Steel Folding Step Pad 2-3/16" x 4-3/8" Bolt-On Steel Chrome Plated Grab Handle 1/2" Dia. x 13" Weld-On Metal Grab Handle 3/8" Dia. x 5" Weld-On Metal Grab Handle 7/16" Dia. x 5" Weld-On Painted Steel Trailer Bed Step 12"W x 18"H x 5"D
7300208
7300205 5430095
Spare Tire Carriers Part# 8900009-01 8900010-01 8900003 8900002 8900004 Ref # 6220 6280 HDSTC STC100 TTSTC100 Description Spare Tire Carrier Kit 4 & 5 Hole Wheels without Bracket Padlock Spare Tire Carrier Kit 4 & 5 Hole Wheels with Bracket Padlock Spare Tire Carrier Kit 3 x 5 Tongue 4-3/4" Lift 7" Offset with Hardware Spare Tire Carrier Kit 3 x 4 Tongue 4-3/4" Lift 7" Offset Spare Tire Carrier Kit Weld-On 4& 5 Hole Wheels Finish Zinc Zinc Zinc Zinc Painted Hardware Included Included Included Included Included
8900009-01
890010-01
8900002
8900003
8900004
Description Die Cast Coupler Lock fits 1-7/8", 2" & 2-5/16" Couplers Rapid Hitch Chrome Steel Receiver Hitch Ball Pin Lock Set - Keyed Alike 5/8" x 4-1/2" Locking Hitch & Coupler Pin Set - Keyed Alike Cam Lockrod Door Lock & Keeper - Keyed Alike Laminated Steel Master lock Padlock 1-9/16" Wide Heavy Duty Shielded Padlock 2-3/4" Diameter * More locks on page J-12 *
8200134 8200185
8200177-01
8200141
8200096
WWW.TEXTRAIL.COM
J-2
H A R D WA R E & LO C K S
Strap & Flush Mount Hinges Part# 7400028 7400147 7400021 7402212 7402512 7402008 7404022 Ref # 104 1002 1003 2212 2512 2008 4022 Description Chrome Cast Flush Mount Hinge with 5/16" Stainless Steel Pin 3-1/4"W x 6" L Chrome Cast Flush Mount Hinge with 1/2" Zinc Steel Pin 3-1/4"W x 4-9/16" L Removable Pin - Left Hand Chrome Cast Flush Mount Hinge with 1/2" Zinc Steel Pin 3-1/4"W x 4-9/16" L Removable Pin - Right Hand Zinc Plated Strap Hinge with 1/2" Stainless Steel Pin 12" L over Gasket 270 Zinc Plated Strap Hinge with 1/2" Stainless Steel Pin 12" L over Gasket 180 Zinc Plated Strap Hinge with 8-31/32" L from Pin to End with 3-Hole Bracket 10-1/4" Overall Length Zinc Plated Flush Mount Strap Hinge with 1-3/4" W Strap x 12" L over Gasket 270
7400021-RH 7402008 7402212 7400147-LH 7400028 7402512 7404022
Part# 7400011
Ref # A1808
OAW 2-1/4"
Strap Hinge with Grease Fitting OAL OAH Gauge 3-9/32" 2-1/2" 0.307"
7400011
Size
2" x 2"
2-1/2" x 2-1/2"
Pin
3/16" 3/16" 7/32" 9/32" 1/8"
Gauge
0.082" 0.089" 0.092" 0.130" Cold-Rolled Steel Cold-Rolled Steel Cold-Rolled Steel Cold-Rolled Steel Stainless Steel
Description Butt Hinge - No Holes Butt Hinge - No Holes Butt Hinge - No Holes Butt Hinge - No Holes Butt Hinge - No Holes
Fixed Steel Hinge Pin with Grease Zerk Description 2-Piece Weld-On Steel Pin with Brass Grease Fitting 4-1/2" Overall Length x 3/4" Dia Body x 1/2" Dia Pin
Ref #
Finish
Knuckle
0.500 1.000 1.000 1.000 1.000
SS51515 Stainless Steel S41 14-GA Steel A473 11-GA Steel S43 14-GA Steel S50 14-GA Steel A317-1 14-GA Steel
Description Continuous Hinge Continuous Hinge Continuous Hinge Continuous Hinge Continuous Hinge Continuous Hinge
WWW.TEXTRAIL.COM
J-3
H A R D WA R E & LO C K S
8200136
8200036
8200038
8200030
8200265
Part# 8200038 8200037 8200239 8200036 8200240 8200136 8200245 8200264 8200265 8200030 8200031 8200242 8200025 8200243 8200064
7500140
Ref # L9015 N9015 R9015 S9015 T9015 T2600 T1100 T600 T2800 L9018 N9018 K510 K545 L625 39LC
Plain Plain
Type Junior Junior Junior Junior Junior T-Handle T-Handle T-Handle T-Handle Large Large
Flush Latches Hole Size 2-5/8" x 3-11/16" 2-5/8" x 3-11/16" 2-5/8" x 3-11/16" 2-5/8" x 3-11/16" 2-5/8" x 3-11/16" 2-7/8" x 3-5/8" 2-7/8" x 3-5/8" 2-3/8" x 3-1/8" 3-1/8" x 4-7/16" 3-1/8" x 4-7/16" 3-1/8" x 4-7/16"
8200243
Description Locking Paddle Latch Non-Locking Paddle Latch Locking Inside Release Paddle Latch Locking Paddle Latch Locking Inside Release Paddle Latch Locking T-Handle Latch Single Point Folding Locking T-Handle Latch Double Point Folding Locking T-Handle Latch Truck Bed / Tool Box Locking T-Handle Latch Truck Bed / Tool Box Locking Paddle Latch Non-Locking Paddle Latch Replacement Key Only for 510 Lock Replacement Key Only for 545 Lock Replacement K545 Key & Tumbler for Jr Paddle Latch Replacement LL71 Key & Tumbler for Jr Paddle Latch
7500142
7500141
7500140
8200002
8200016
8200042
Chrome Flush Mount Dead Bolt & Locking Paddle Latch Part# Ref # Description 7500140 13631 Outer Dead Bolt / Paddle Latch 7500142 14901 Outer Locking Paddle Latch 7500141 11706 Inner Dead Bolt for 7500140 7500143 10953 Inner Latch Flat Plate Hood Latches Part# Ref # Description 8200002 WJ96 Spring Loaded Pivot Hood Latch - Black Finish 8200035 WJ94 Spring Loaded Pivot Hood Latch - Chrome Plated 8200016 WJ91 Straight Hood Latch - Stainless Steel 8200182 WJ99 Catch Plate - Black Finish 7300073 WJ93 Catch Plate - Chrome Plated 8200015 WJ90 Catch Plate - Stainless Steel 8200042 35R Rubber Hood Latch with Zinc Hardware
J-4
WWW.TEXTRAIL.COM
H A R D WA R E & LO C K S
Side Door Bar Lock Assembly Part# 7300004 Ref # 15736 Description 36" x 18" Bar Lock Assembly (includes Welded Bar Lock Assembly, Hasp Keeper, & PVC Handle Grip) Universal Cam-Door Lock Assembly
Part# 8200068 8200061 8200129 8200188 8200108 8200022 8200183 8200128 7300075
Ref # 470 401 158202 158207 100 101 158202 158203 100C
Description Cam Door Lock Kit 3/4"ID Aluminum Shaft (excludes pipe) Cam Door Lock Kit 3/4"ID Zinc Shaft (excludes pipe) Replacement Top Keeper Zinc Replacement Top Lug Zinc Replacement Handle for Cam Door Lock Kit* Zinc Replacement Riveted Hasp Assembly 1-Piece Zinc Replacement Bottom Lug Zinc Replacement Bottom Keeper Zinc Replacement Rubber Grip for Handle
8200068
8200061
*Includes Rubber Grip To order replacement parts for the 8200068 Aluminum CAM Lock please notify your sales representative. Cab Lock Handles Part# Ref # Description 8200130 276 Locking Handle 1/4" "L" Shaft with Lock & Keys 8200135 277 Non-Locking Handle 1/4" "L" Shaft 8200133 777 Locking Handle 1/4" "T" Shaft with Lock & Keys 8200061 8200061 8200061 8200061 7500148 11369 Locking Cargo Handle 1/2" "L" Shaft with Lock & Keys 8200266 81820 Door Handle Cam Surface Mounted Cab / Slam Locks Part# Ref # Description Finish Width Height These surface-mounted 8200007 8200006 Part# 8200066 8200021 8200022 8200029 8200215 58LH 58RH Ref # 30314 32 101 295 8025 Left Hand Cab Slam Latch Right Hand Cab Slam Latch Zinc Zinc Hasp Description Hasp & Staple Riveted Pin 3-1/4" x 1-1/2" Zinc Hasp & Swivel Staple 3" Zinc CAM Lock Hasp 1-Piece Riveted Zinc Hasp & Staple Kit 7-Piece Zinc Hockey Puck Internal Shackle Hasp 2-Piece Chrome
WWW.TEXTRAIL.COM
J-5
8200066 8200029
2 2
3-3/8 3-3/8
H A R D WA R E & LO C K S
7500155-02
7500153
7500154
7500155
7500156
7500146
7500190
7500145
7500203
7300206
7300201
7300085 / 7300078
7300200 / 7500029
7300038
Door Holders & Hold-Backs Part# 7500144 7300201 7300202 7300203 7300204 7300085 7300078 7300206 7300207 7500155-02 7500153 7500154 7500155 7500156 7500145 7500146 7500190 7300005 7300038 7500149 7300200 7500029 7500150 Ref # 38R DHS DH1 39R DH2 ADH2 ADH4 DH100 DH101 ADHR2 600 604SS 605SS 606SS 294 296 2910 602 60202 603SS 603 PH8ZN P1016 Size 1" 1" 2" 2" 2" 4" 2-9/16" 2-1/2" 1-11/32" 1-1/2" 2-1/2" 3-1/2" 4" 6" 10" 2" 4" 4" 4" 6" Door Holder Plastic Stem with Rubber Socket Door Holder Rubber Socket for 1" or 2" Long Plastic Door Stem Door Holder Plastic Stem Only for 7300201 Door Holder Plastic Stem with Rubber Socket Door Holder Plastic Stem Only for 7300201 Spring Loaded Catch & Door Holder 2-Piece Aluminum Spring Loaded Catch & Door Holder 2-Piece Aluminum Door Holder with Rubber Insert Socket Zinc Rubber Insert Only For 7300206 Socket Door Holder Stem Aluminum with Rubber Cap Door Holder White Nylon Socket White 0.090" Thick Door Holder Stem Only Stainless Steel Door Holder Stem Only Stainless Steel Door Holder Stem Only Stainless Steel Door Holder Plastic Stem with Female Receiver Door Holder Plastic Stem with Female Receiver Door Holder Plastic Stem with Female Receiver 90 Wire Door Holder with Female Receiver Zinc 45 Wire Door Holder with Female Receiver Zinc T-Wire Door Holder with Spring Loaded Female Receiver Stainless Steel T-Wire Door Holder with Female Receiver Zinc T-Wire Door Holder with Female Receiver Zinc Base for Wire Door Holders & Receivers
J-6
WWW.TEXTRAIL.COM
H A R D WA R E & LO C K S
Tie Loops Part# 7500157 8850009 5350715 5350147 5350146 5350716 Ref # TLA122 TL12R TLM3812 TLM7161 TLM121 TLM3821 TLM3811 TLM382 GHM385 Description Tie Loop - Aluminum Tie Loop - Metal Tie Loop - Metal Tie Loop - Metal Tie Loop - Metal Tie Loop - Metal Tie Loop - Motor Cycle Tie Down Tie Loop - Metal Grab Handle - Metal
5350716 5350719
Diameter 1/2" 1/2" 3/8" 7/16" 1/2" 3/8" 3/8" 3/8" 3/8" 7/16"
I.D. 2" 2" 1/2" 1" 1-1/2" 2-1/4" 1-1/4" 2" 5" 5"
5350605
Style Round Round Bent Bent Bent Square Bent Bent Square Square
Application Bolt-On Weld-On Weld-On Weld-On Weld-On Weld-On Weld-On Weld-On Weld-On Weld-On
8850009
5350222
5350146
D-Rings & Rope Ring Part# 7500158 9250089 9250088 9250087 9250019 9250035 9250036 9250016-02 9250016 9250034 9250033 Ref # TL178AB B20 B601 B703 DR-12W DR-12B DR-58W J707 B48 B801A B901 Description Rope Ring - 7/16" dia. Aluminum bolt-on with bracket Rope Ring - 1/4" dia. steel zinc. Rope Ring - 3/8" dia. steel zinc. Recessed 3" hole Rope Ring - 1/4" dia. steel zinc w/bazel D-Ring - 1/2" dia. steel w/ weld-on bracket 12K UBS* D-Ring - 1/2" dia. zinc w/ bolt-on bracket 12K UBS* D-Ring - 5/8" dia. steel w/ weld-on bracket 19K UBS* D-Ring - 1" dia. steel weld-on 3x4 46,760K UBS* USA D-Ring - 1" dia. steel weld-on 3x4 46,760K UBS* Rope Ring - Recessed Zinc 3-5/8" hole 6K USB* Rope Ring - Recessed Zinc 360 Rotating 6K USB* *Ultimate Breaking Strength
9250035 9250036 Safe Working Load
7500158 9250089
9250088
9250087
9250034
9250019
9250016-02 9250033
WWW.TEXTRAIL.COM
J-7
H A R D WA R E & LO C K S
Grab & Slip Hooks
Part# Ref # Description 8850072 GH14 1/4" Grab Hook 7,800 UBS* 8850073 GH516 5/16" Grab Hook 11,700 UBS* 8850074 GH38 3/8" Grab Hook 16,200 LB UBS* 8850097 SH14 1/4" Slip Hook w/ Latch 7,800 UBS* 8850017 SH516 5/16" Slip Hook w/ Latch 11,700 UBS* 8850016 SH38 3/8" Slip Hook w/ Latch 16,200 LB UBS* *Ultimate Breaking Strength Hooks & Links Part# Ref # Description 8850090 162S Snap Hook - Double-End 3-1/2" x 5/8" 8850091 225 Snap Hook - Swivel 3-1/2" x 5/8" 8850092 231 Snap Hook - Open End 3-1/2" x 3/8" 7300045 316QL Quick Link - 3/16" 616 LB UBS* 9250401 516QL Quick Link - 5/16" 1540 LB UBS* 9250012 38QL Quick Link - 3/8" 1900 LB UBS* 9250403 12QL Quick Link - 1/2" 2650 LB UBS* 9250400 14QL Quick Link - 1/4 3500 LB UBS* 9250368 516SL Chain Spring Link 5/16 Zinc 350LBS WWL 9250369 38SL Chain Spring Link 3/8 Zinc 425LBS WWL 8850105 316S S Hook 3/16 350LB Zinc 8850106 14S S Hook 1/4 567LB Zinc 8850018 716S S Hook - 7-16" 5K 8850019 716SC S Hook - 7-16" 5K w/ Catch 8200146 1270 Spring Link - Bulk 100 pk *Ultimate Breaking Strength Safe Working Load 2,600 LB 3,900 LB 16,200 LB 7,800 LB 11,700 LB 16,200 LB Grade G43 G43 G43 G43 G43 G43
GRAB SLIP
8850090
8850091
8850092
SPRING
QUICK
Hitch Pins
Part# 7350209 7350315 7350062 7350264 7350714 7350314 7300002 7300013 7300066 7300014 7300015 Ref # F-4 F-5 F-6 211HP F-21 F-500 66100 66105 66110 66115 66125 Finish Zinc Zinc Zinc Zinc Chrome Zinc Zinc Zinc Zinc Zinc Zinc Size 1/2" 5/8" 5/32" 1/8" 5/8" 5/8" 1/2" 5/8" 3/4" 3/4" 1" Description 105 Bent Receiver Pin 2-5/8" Long with Retaining Clip 105 Bent Receiver Pin 3" Long with Retaining Clip Retaining Clip 3" Long for 1/2" - 5/8" Hitch Pins Retaining Clip 2-5/8" Long for 1/2" - 5/8" Hitch Pins 105 Bent Receiver Hitch Dead Bolt for 2-1/2" Receiver Tubes Includes keys and dust cap 105 Bent Receiver Pin with Retaining Clip for 2-1/2" Receiver Tubes Forged Steel Yellow Zinc Plated Spring Wire Handle Hitch Pin 4-1/4" Long with Retaining Clip Forged Steel Yellow Zinc Plated Spring Wire Handle Hitch Pin 6-1/4" Long with Retaining Clip Forged Steel Yellow Zinc Plated Spring Wire Handle Hitch Pin 4-1/4" Long with Retaining Clip Forged Steel Yellow Zinc Plated Spring Wire Handle Hitch Pin 6-1/4" Long with Retaining Clip Forged Steel Yellow Zinc Plated Spring Wire Handle Hitch Pin 6-1/4" Long with Retaining Clip
7350314
7300002
7350714
Packaged Hitch Pins Part# 7350209-01 7350315-01 Ref # TTRP120 TTRP583 Finish Zinc Zinc Size 1/2" 5/8" Description 105 Bent Receiver Pin with Retaining Clip 105 Bent Receiver Pin with Retaining Clip
7350315-01
7350209-01
WWW.TEXTRAIL.COM
J-8
H A R D WA R E & LO C K S
Part# 6750144 6750141 6750148 6750143 6750142 6750140 6750120 6750145 6750139 Part# 7300034 7300036 7300022 7300023 7300037 7300029 7300035 7300030 Part# 8200330
8200034
Ref # 66045 66050 66063 66066 66070 66053 25201 66056 66060 Ref # 66003 66000 66007 66008 66006 66010 66015 66017 Part# 5553
Snapper Pins Description Square 3/16" Yellow Zinc Snapper Pin Square 1/4" Yellow Zinc Snapper Pin Square 1/4" Yellow Zinc Snapper Pin Square 1/4" Yellow Zinc Snapper Pin Square 1/4" x 3-3/4" Snapper Pin Square 5/16" x 2-25/32" Snapper Pin Round 5/16" x 2-3/4" Snapper Pin with Chain Square 3/8" x 1-5/8" Snapper Pin Square 3/8" x 2-1/2" Snapper Pin Linch Pins Description 3/16" x 1-3/8" Yellow Zinc Linch Pin 1/4" x 1-3/4" Yellow Zinc Linch Pin 5/16" x 1-3/4" Yellow Zinc Linch Pin 5/16" x 3" Yellow Zinc Linch Pin with Chain 3/8" x 2-11/32" Yellow Zinc Linch Pin 7/16" x 1-3/4" Yellow Zinc Linch Pin 7/16" x 2" Yellow Zinc Linch Pin 7/16" x 1-3/4" Yellow Zinc Linch Pin with 10" Lanyard Butterfly Latch Description 1/4 x 1-1/2 Steel Butterfly Strap with Grips
8200033 9250036
Length 30
8200330
Spring & Tipper Latches Part# 8200034 8200033 8200099 Part# 8200111 Width 1 Part# 8200008 Ref # 5240 2598 2575 Description Paddle Handle Tipper Latch Assembly Zinc 5/8" Spring Loaded Center Pop-Up Latch Assembly
1/2 Spring Loaded Latch Assembly Zinc 1-1/2 x 3 Load Plate 6-1/2 Overall Length x 1-9/16 Wide
Suitcase Latch Ref# Description 207 Catch/Pull Down Latch Kit - Zinc Length Catch Width 3-13/16 1/2 Toggle Action Suitcase Latch Ref# Description 801 Catch/Pull Down Toggle Action Latch Zinc - No Striker / Catch
WWW.TEXTRAIL.COM
J-9
8200008
8200111
H A R D WA R E & LO C K S
Torx Screwdriver Bit and Holder Size Description Screw Bit Holder for Torx Driver 1/4" Drive 1/4" Torx Hex Screw Bit for 3/16" Drive 1/4" Torx Hex Screw Bit for 1/4" Drive 5/16" Torx Hex Screw Bit for 1/4" Drive Torx Head Floor Screws Part# Ref # Size Length Description 7030063 1420100 1/4"-20 1" Self Tapping Torx Head Screw 7030057 1420150 1/4"-20 1-1/2" Self Tapping Torx Head Screw 7030053 1420200 1/4"-20 2" Self Tapping Torx Head Screw 7030058 1420225 1/4"-20 2-1/4" Self Tapping Torx Head Screw 7030170 1420250 1/4"-20 2-1/2" Self Tapping Torx Head Screw 7030059 1420300 1/4"-20 3" Self Tapping Torx Head Screw 7030060 5160250 5/16"-18 2-1/2" Self Tapping Torx Head Screw 7030061 5160300 5/16"-18 3" Self Tapping Torx Head Screw Rivets and Rivet Guns For use on copper, brass, tin, lead, steel, aluminum, pewter and zincvirtually any material! Rivets won't easily rust or corrode or come loose. Kit includes heavy-duty rivet gun, powerful enough to do jobs fast. Gun has non-rust zinc alloy die-cast body with strong drop-forged handles and rubberized grips. Chain lock keeps handles closed. Durable fulcrum pin. Also included are 4 speciallyhardened nosepieces for 3/32", 1/8", 5/32" and 3/16" diameter rivets. Nosepieces store in gun. Easy-to-handle gun weighs less than 1-1/2 lbs Part# Ref # Diameter Hole Size Drill Hole Length Grip 7030316 AA42D 1/8" .129-.133 9/64" 0.265 .032-.125 7030315 AA44D 1/8" .129-.133 9/64" 0.390 .188-.250 7030314 AA45D 1/8" .129-.133 9/64" 0.515 .251-.312 7030313 AA46D 1/8" .129-.133 9/64" 0.515 .313-.375 7030312 AA48D 1/8" .129-.133 9/64" 0.640 .376-.500 7030311 AA54D 5/32" .160-.164 11/64" 0.465 .188-.250 7030310 AA56D 5/32" .160-.164 11/64" 0.540 .251-.375 7030309 AA64D 3/16" .192-.196 13/64" 0.440 .126-.250 7030308 AA64LF 3/16"x5/8" .192-.196 13/64" 0.440 .126-.250 7030307 AA68 3/16" .192-.196 13/64" 0.565 .251-.375 7030306 SS66D 3/16" SS .192-.196 13/64" 0.565 .251-.375 7030305 AA66LF 3/16"x5/8" .192-.196 13/64" 0.565 .251-.375 7030300 AA68D 3/16" .192-.196 13/64" 0.690 .376-.500 7030301 AA610 3/16" .192-.196 13/64" 0.815 .501-.625 7030302 AA610LF 3/16"x5/8" .192-.196 13/64" 0.815 .501-.625 7030303 AA612 3/16" .192-.196 13/64" 0.940 .626-.750 7030304 AA612LF 3/16"x5/8" .192-.196 13/64" 0.940 .626-.750 Part# Ref # Description 9420052 8550 Heavy Duty Manual Rivet Tool 9420036 5205 Economy Manual Rivet Tool Part# 9420055 9420053 7030163 9420054 Ref # T14 T25 T30 T40
Stake Pocket Part# 9250097 9250096 Ref # STK02 STK01 Width 3-1/2" 3-1/2" Depth 1-1/2" 1-1/2"
J-10
9420055
Torx Bit
9420036
Gauge 4 8
WWW.TEXTRAIL.COM
H A R D WA R E & LO C K S
Part# 8200003 8200004 8200005 8200105 Part# 7030171 7030172 7030173 7030174 7030175 7030176 7030177 7030178 7030180 7030181 7030179 7030191 7030192 7030193 7030194 7030195 7030196 7030197
Part# 7500237 7500009 7040009
Ref # 2589 2588 2591 2585 Ref # 18JDB 532JDB 1164JDB 316JDB 1364JDB 732JDB 14JDB 38JDB 532NDB 316NDB 38NDB 18SDB 964SDB 532SDB 1164SDB 316SDB 1364SDB 732SDB
Ref # 100578 100579 200096
Stake Components Description 4-Piece Stake Corner Security Latch Set 4-Piece Straight Security Latch Set 4-Piece Rack Corner Connector Set 4-Piece Rack Straight Connector Set Drill Bits Type Diam. Length Jobber 1/8" 2-3/4" Jobber 5/32" 3-1/8" Jobber 11/64" 3-1/4" Jobber 3/16" 3-1/2" Jobber 13/64" 3-5/8" Jobber 7/32" 3-3/4" Jobber 1/4" 4" Jobber 3/8" 5" Nitro 5/32" 2-1/16" Nitro 3/16" 2-3/16" Nitro 3/8" 3-1/8" Stubby 1/8" 1-7/8" Stubby 9/64" 1-15/16" Stubby 5/32" 2-3/16" Stubby 11/64" 2-1/8" Stubby 3/16" 2-3/16" Stubby 13/64 2-1/4" Stubby 7/32" 2-3/8"
A 2" 3" 3" B 96" 96" 96"
Twist 1-5/8" 2" 2-1/8" 2-5/16" 2-7/16" 2-1/2" 2-3/4" 3-5/8" 1" 1-1/8" 1-13/16" 7/8" 15/16" 1" 1-1/16" 1-1/8" 1-3/16" 1-1/4"
Description Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit
8200003
8200004
8200005
Pre-Drilled Rubber Bumpers C D E* F* Bolt Size 2" 11-1/2" 5/8" 8 3/8" 4" 11" 1-1/8" 8 9/16" 4" 11" 1-1/8" 9 9/16" *E = Hole Size F = Number of Holes
Description Rubber "D" Bumper Rubber "D" Bumper Rumber Grooved Surface "D" Bumper
7500040
7500162
7500047
7500041
Part# 7500162 7500047 7500041 7500040 Part# 8530001 8530002 8530003 5350253 8530004 8530005 8530006 8530007
Ref # RB78 RB11 RB212 RB112 Ref # CP1211 CP1251 CP2381 CP2382 CP2781 CP2116 CP2018 CP3316
Rubber Bumpers Diam. Height Hole Description 7/8" 1/2" 3/16" Rubber Bumper with Washer 1" 1" 1/8" Rubber Bumper with Washer 2-1/2" 1" 3/8" Rubber Bumper 1-1/2" 3/4" 1/4" Rubber Bumper with Washer Cap Plug Description Poly Cap Plug 1" X 2" Rectangular 1/16" Poly Cap Plug 1-1/4" x 1-3/4" Rectangular Poly Cap Plug 2-3/8" Round 1/16" Steel Cap Plug 2-3/8" Round 1/8" Poly Cap Plug 2-7/8" Round 1/16" Poly Cap Plug 2" Square x 1/16" Poly Cap Plug 2" Square x 1/8" Poly Cap Plug 3" Square x 3/16"
8530002
5350253
8530003
8530005
WWW.TEXTRAIL.COM
J-11
H A R D WA R E & LO C K S
8200150-01
8200221-01
8200177-01
Packaged Locks Description 1/2" Receiver Lock 5/8" x 4-1/2" Locking Hitch & Coupler Pin Set - Keyed Alike 5/8" Chrome Receiver Deadbolt Lock 5/8" Receiver Lock
8200103 8200140 8200150
8200197
8200221
8200216
8200219
8200231
8200134 / 8200200
Receiver Hitch Locks Part# 8200140 8200221 8200170 8200150 8200134 8200200 8200103 8200194 8200219 8200197 8200216 8200217 8200218 Ref # 374DAT T3 50796 375DAT 3434 TBB43 TBB4 TAR300 SXT5 TR200 T3B T3U T3R Description 1/2" Receiver Lock with Keys and Covered Keys Slot 5/8" Steel Triple Plated Chrome Receiver Deadbolt Lock 5/8" Steel Receiver Deadbolt Lock 5/8" Receiver Lock 5/8" Chrome Steel Receiver Hitch Ball Pin Lock Set - Keyed Alike 5/8" Chrome Steel Receiver Hitch Ball Pin Lock Set - Keyed Alike 5/8" x 4-3/8" Locking Hitch Pin Barbell Heads 5/8" or 1/2" Anti-Rattle Locking Pin System - Stainless Steel 5/8" x 3/1/4" Pin Stainless Steel Receiver Lock 5/8" Chrome Receiver Deadbolt Lock 5/8" Black Epoxy Powder Coated Receiver Deadbolt Lock 5/8" Blue Epoxy Powder Coated Receiver Deadbolt Lock 5/8" Red Epoxy Powder Coated Receiver Deadbolt Lock
ireless! W
Part# 7350109 Ref # 4843 Wireless Back-Up / Hitch Assist Camera Monitor Power Camera Power Description Auxiliary/Lighter 4-Way Flat 3-1/2" Color Monitor with Magnetic Base & Camera
WWW.TEXTRAIL.COM
J-12
H A R D WA R E & LO C K S
8200209 / 8200210 8200209 8200210 8200209 8200210 8200141 8200208 8200047 8200228
Ref # TL-45 8200058-02 40KA 8200208 TRP170 8200181 THPXL 8200184 THPXLKA 8200047 37D 8200141 3DAT 8200211 TLM4100 8200209 TPC125 8200210 TPC225 8200198 TMC10 8200228 TLM87
Part# 8200096
Padlocks Description Heavy Duty Plated Steel Shielded Padlock 2-3/4" Diameter Heavy Duty Stainless Steel Shielded Padlock 2-3/4" Diameter - Keyed Alike Heavy Duty Stainless Steel Shielded Padlock 2-3/4" Diameter Heavy Duty "Hockey Puck" Internal Shackle Door Lock - Rekeyable Heavy Duty "Hockey Puck" Internal Shackle Door Lock - Rekeyable - Keyed Alike Laminated Steel Masterlock Shielded Padlock 1-9/16" Wide Laminated Steel Masterlock Padlock 1-9/16" Wide 4-Pack Keyed Alike 40MM 1" X 1/4" Diameter Shackle Padlocks Brass Combination Resettable 2" Body 1-1/4" x 5/16" Diameter Shackle Padlock Set Brass Combination Resettable 2" Body 2-1/4" x 5/16" Diameter Shackle Padlock Set Deluxe Door Latch Lock Flat Keys 3/4" Span & Covered Key Slot Solid Steel Laminated 1-3/16" Body 7/8" x 3/16" Diameter Dual Locking Shackle Padlock Coupler Latch Locks Coupler Latch Locks p Coupler Latch Locks
8200199
8200175 / 8200179
t# Part# 8200047 8200175 8200199 8200179 8200043 8200174 8200180 8200049 8200050 8200044 8200198 8200059
R f# Ref 37D TC2 TC3 SXTC2 F22 TC1 SXTC1 63220 63221 63222 TMC10 1471DAT
D i ti Description Laminated Steel Masterlock Shielded Coupler Latch Lock 1-9/16" Wide Chrome Plated Steel 2-1/2" Span Coupler Latch Lock 1/4" Pin with Covered Key Slot Chrome Plated Steel 3-1/2" Span Coupler Latch Lock 1/4" Pin with Covered Key Slot Stainless Steel 2-1/2" Span Coupler Latch Lock 1/4" Pin with Covered Key Slot Brass 5/8" Span Coupler Latch Lock Chrome Plated Steel 7/8" Span Coupler Latch Lock 1/4" Pin with Covered Key Slot Stainless Steel 7/8" Span Coupler Latch Lock 1/4" Pin with Covered Key Slot Fulton Black Finished Coupler Latch Lock 1/2" Span with Covered Key Slot Fulton Black Finished Coupler Latch Lock 2" Span with Covered Key Slot Fulton Black Finished Coupler Latch Lock 2-3/8" Span with Covered Key Slot Deluxe Coupler/Door Latch Lock Flat Keys 3/4" Span & Covered Key Slot Chrome Plated Steel 3-3/8" Span Coupler Latch Lock 9/32" Pin with Covered Key Slot
J-13
WWW.TEXTRAIL.COM
H A R D WA R E & LO C K S
8200173
8200140
8200053
8200178
8200090 Position #1
8200090 Position #2
8200090 Position #3
8200085
8200045
8200166
8200102
8200055
Coupler Locks Part# 8200173 8200178 8200113 8200102 8200053 8200090 8200166 8200085 8200045 8200054 8200084 8200089 8200056 8200088 8200086 8200055 Ref # UMAX50 UMAX100 379DAT 377DAT TL-20* TL-33* TL-38 G-37 G-33 G-34 G-35 G-38 G-39 G-40 TP25 TP20 Description Universal Die Cast Coupler Lock fits 1-7/8", 2" & 2-5/16" Couplers Universal Hardened Steel Coupler Lock fits 1-7/8", 2" & 2-5/16" Couplers Universal Die Cast Coupler Lock fits 1-7/8", 2" & 2-5/16" Couplers Universal Coupler Lock fits 1-7/8" & 2" Couplers. Chrome. Aluminum Coupler Lock fits Bulldog 1-7/8", 2" & 2-5/16" Couplers. Aluminum Coupler Lock fits 2" & 2-5/16" 2K thru 10K Trigger Style Couplers Aluminum Coupler Lock fits 2" 5K Latch Style Couplers Aluminum Coupler Lock fits 2" & 2-5/16" 8K thru 10K Large Couplers Aluminum Coupler Lock Lip Engaging Coupler Lock with Keys. 5/8" Steel Push Pin Lock. Fits Atwood 2" Latch Style and Fulton or Shelby 1-7/8" & 2" Trigger Style Couplers. Coupler Lock with Keys for 2" & 2-5/16" Rolled Lip Couplers. Powder Coat Finish. Coupler Lock with Keys for 1-7/8" Cast Trigger Style Couplers. Powder Coat Finish. Coupler Lock with Keys for 2" Cast Trigger Style Couplers. Powder Coat Finish. Coupler Lock with Keys for 2-5/16" Mobile Home Couplers. Powder Coat Finish. Coupler Lock with Keys for 2" & 2-5/16" Disc Wide Flange Couplers. Powder Coat Finish. Coupler Lock with Keys for Solid Steel Couplers. Powder Coated. Fits 2" Bulldog Couplers. Coupler Lock with Keys for Solid Steel Couplers. Powder Coated. Fits 2-5/16" Bulldog Couplers. Cast Push-Button Coupler Lock with Keys for 2-5/16" Bulldog Couplers Cast Push-Button Coupler Lock with Keys for 2" Bulldog Couplers * Excludes Padlock and Keys
J-14
WWW.TEXTRAIL.COM
H A R D WA R E & LO C K S
LOCKS CONTINUED
8200047 8200198
8200141
8200215
8200228
8200228
8200058-02
Trailer Door Locks Part# 8200047 8200198 8200209 8200210 8200185 8200141 8200228 8200215 8200058-02 8200181 Ref # 37D TMC10 TPC125 TPC225 DL80 3DAT TLM87 8025 40KA THPXL Description Laminated Steel Masterlock Shielded Padlock 1-9/16" Wide Deluxe Door Latch Lock Flat Keys 3/4" Span & Covered Key Slot Brass Combination Resettable 2" Body 1-1/4" x 5/16" Diameter Shackle Padlock Set Brass Combination Resettable 2" Body 2-1/4" x 5/16" Diameter Shackle Padlock Set Lockrod Cam & Keeper Lock for Trailer Door with Butterfly / Cam Latch Laminated Steel Masterlock Padlock 1-9/16" Wide Solid Steel Laminated 1-3/16" Body 7/8" x 3/16" Diameter Dual Locking Shackle Padlock Hockey Puck Internal Shackle Hasp 2-Piece Chrome Heavy Duty Stainless Steel Shielded Padlock 2-3/4" Diameter - Keyed Alike Heavy Duty "Hockey Puck" Internal Shackle Door Lock - Rekeyable ATV Lock & Hold-Down System
Theft deterrent hardware system. Locks conveniently keyed alike in combo sets (ATVC). Provides maximum safety and security. Eliminates the need for straps and tie downs: saves time and money! Easier to store! Ratcheting adjustment: Small Lock - 4-1/2 range of adjustment; Long Lock - 11 range of adjustment. Specially designed for ATV use, also great for lawn tractors, golf carts, and other utility vehicles. All necessary mounting hardware included.
Part#
8200009
Ref #
Description
WWW.TEXTRAIL.COM
H A R D WA R E & LO C K S
LOCKS CONTINUED KS CONTINUED S
8 000 8200070 8200070 8200070 0 King Pin Coupler Lock Pintle Coupler Lock
8200069
8200057
Description Gooseneck 2-5/16" Coupler Lock - Aluminum 3/4" Heavy Duty Steel Locking Pin. Recommend 8200051 TL-50* to use with 8200168. Gooseneck Lock fits Round and Square Tubes. Secures Adjustable Top of Coupler. Use with 8200168 TL-51* 8200051. 8200096 TL-45 Heavy Duty Plated Steel Shielded Padlock 2-3/4" Diameter 8200070 TL-53 Deluxe Gooseneck Combo Lock Kit. Includes 8200051, 8200168 & 8200096. 8200057 TL-60* Pintle Coupler Lock 2-1/2" to 3" Eye - Aluminum 3/4" Heavy Duty Steel Locking Pin. 8200069 TL-70* King Pin Coupler Lock - Aluminium 3/4" Heavy Duty Steel Locking Pin. * Excludes Padlock & Keys Specialty Locks
Part#
Ref #
8200222
8200204
8200205
8200207
8200206
Part# Ref # Description 8200204 TDL815 Quadra Braid Dual Loop Multi-Use Cable 8' x 15mm (9/16") 8200205 TDL1510 Quadra Braid Dual Loop Multi-Use Cable 15' x 10mm (3/8") 8200207 VMAX6 Versatile Cinching Multi-Use Cable Loop Locking Cable 6' x 10mm (3/8") 8200206 MAX40 Motorcycle Disc Cable U-Lock with PVC Sleeve over 1/2" Chrome Shackle 8200222 MAX60 Motorcycle Disc Cable U-Lock with PVC Sleeve over 9/16" Chrome Shackle
WWW.TEXTRAIL.COM
J-16
H A R D WA R E & LO C K S
LOCKS CONTINUED
8200248
8200023
8200165
Wheel Locks Ref # Description TCL75 Wheel Lock RA25 Wheel Lock RA25K Wheel Lock Keyed Alike EZ300 Wheel Lock Up To 15" TK100 Wheel Lock Up To 15"
Spare Tire Locks
8200076
Description Spare Tire Lock Lug Nut Style - Chrome Plated Spare Tire Lock Lug Nut Style - Chrome Plated for Side Mounted Spares Spare Tire Cable Lock 36" x 12MM (7/16")
8200171
8200224
8200232
Chain Part# 8850061 8850063 8850064 8850065 8850066 8850067 8850068 Ref # C316P C14P C516P C38P C1423 C1426 C1419 Description 3/16" Galvanized Proof Chain 3.2K 1/4" Galvanized Proof Chain 5.2K 5/16" Galvanized Proof Chain 7.6K 3/8" Galvanized Proof Chain 10.6K 5/16" Shot Blast High Test Chain 3/8" Shot Blast High Test Chain 1/4" Zinc High Test Chain
J-17
WWW.TEXTRAIL.COM
H A R D WA R E & LO C K S
CHAINS CONTINUED
Safety Chain
Length Capacity Grade Description S-Hooks with Safety Latch on 8850026 6800031P 3/16" 48" 2K 30 Each End Zinc S-Hooks with Safety Latch on 8850030 6800032P 1/4" 48" 5K 30 Each End Zinc S-Hooks with Safety Latch on 8850031 6800033P 1/4" 60" 5K 30 Each End Zinc 7/16" Hook with Safety Latch 8850029 6840215P 1/4" 30" 5.2K 30 Zinc 1/4" Clevis Slip Hood with Safety 8850080 6800028P 1/4" 36" 12.6K 70 Latch 1/4" Clevis Slip Hook with Safety 8850024 6800025P 1/4" 28" 12.6K 70 Latch 3/8" Clevis Slip Hook with Safety 8850025 6800026P 3/8" 36" 26.4K 70 Latch 8850101 8605734 3/8" 1/2" 36" 40" 16.2K 48K 80 Clevis Hook with Safety Latch Clevis Sling Hook with Safety Latch
2010 Copyright by TexTrail, Inc.
Part#
Ref #
Size
8850028 8610004P
WWW.TEXTRAIL.COM
J-18
A C T UAT I N G S Y S T E M S
ACTUATING SYSTEMS
Table Of Contents - Actuating Systems ABS Trailer Kit Actuating Couplers Batteries & Chargers Brake Control & Actuator Replacement Parts Brake Control & Actuators Brake Controllers Breakaway Kits Breakaway Switch & Pin Chargers & Batteries Electro/Hydraulic Actuators Hydraulic Line Kit (Flexible) Hydraulic Line Kit (Tandem Dual) Hydraulic Line Kit Truck Control Kit Vacuum / Hydraulic Brake System Vacuum Pump Kit
WWW.TEXTRAIL.COM
K-1
K-14 K-6 K-2 K-8 K-6 K-3 thru K-5 K-2 K-2 K-2 K-9 K-12 K-13 K-10 K-14 K-14 K-14
2010 Copyright by TexTrail, Inc.
A C T UAT I N G S Y S T E M S
BREAK AWAY KITS
Breakaway kits are designed to apply the trailers electric brakes in the event that the trailer becomes disconnected from the hitch while in motion and hold for 15 minutes. TexTrail offers kits that vary depending on mounting options and the number of axles on the trailer. All kits meet or exceed D.O.T regulations and include a 5 amp sealed rechargeable battery.
Break Away Kits Part # 6550020 6550036 6550021 6550037 6550028 6550038 Ref # J-BTK 50-85312 20100 50-85-303 34-285 5085314
6550028 6550020 6550021
Description Breakaway Kit - clamshell box Breakaway Kit 5amp battery Breakaway Kit 5amp battery Breakaway Kit 5amp battery Breakaway Kit 9amp battery Post Mount Bracket for 6550037
Charger Included
Switch Included
ACTUATING SYSTEMS
6550037
These complete systems incorporate the highest quality components in trailer breakaway systems. Meet or exceed Department of Transportation (DOT) specifications regarding trailer breakaway and holding requirements. If a breakaway occurs between your tow vehicle and your trailer, the breakaway systems will automatically apply consistent braking power to your trailer brakes for a minimum of 15 minutes when installed according to manufactures instructions.
7000352
Break Away Switches & Replacement Pins Part # Ref # Description 6550019 20225 Breakaway Switch 7000352 20059 Breakaway Switch LED 6550010 2010 Breakaway Switch Tekonsha 6550011 2010A Replacement Pin/Cable 20051 Replacement Pin/Cable for
6550019
20051
Chargers & Battery Ref # Description 20011 12 volt ABCD Charger 1024 12 volt ABCD Charger 2024 12 volt Continuous Charger 2023 Battery 12 volt 5 amp
6500027
6250007
6550003
Check your breakaway kit periodically to insure that wiring and connections are secure. A short or an open circuit can result in a no-brake condition. For optimal performance, IT IS RECOMMENDED THAT BREAKAWAY DEVICES BE REPLACED EVERY 3 - 5 YEARS.
ABCD Charger Accelerated Battery Charging Device - Minimal Charging Capacity for Partially depleted Battery - Not Effective for Batteries Under 7 Volts Remaining
WWW.TEXTRAIL.COM
V S
K-2
- Temperature Compensated DC to DC - Maximum Charging Capacity Even if Battery Is Almost Depleted - Effective With Batteries Down To 1 Volt Remaining Charge
2010 Copyright by TexTrail, Inc.
A C T UAT I N G S Y S T E M S
TIME BASED BRAKE CONTROLLER
ACTUATING SYSTEMS
POD (Power on Demand) is your best choice for 1 or 2 axle trailers ... especially when your installation options are limited. POD can be mounted in any direction, and features up-front-easyaccess adjustment controls, even when mounted upside down. POD is the perfect choice with almost vertical dash mounting surfaces. mounting surfaces.
Pilot has a dark, smoke lens that is ideal for direct light applications, creating optimum visibility to read the large, two-digit display. Pilot has flexible mounting options and can be installed in any direction. Our microprocessor allows you the ability to read the display even when mounted upside down. The Pilots digital display shows voltage output to the brakes.
Part# 6500013 Model 80500
The Synchronizer is a brake controller for single and tandem axle trailers equipped with electric brakes. It modulates and controls current from the battery to the trailer brakes. The longer the brake pedal is depressed the greater the current delivered to the trailer brakes until the preset brake power setting is reached.
The Engage is a digital time based controller and is the top of the line time based brake controller. This controller is equipped with a digital display allowing you to select adjustable voltage and power ramp up times. - Troubleshooting: - Current limit - Short circuit - No connection - Hazard flash - Blue fault wire - Lifetime limited warranty
WWW.TEXTRAIL.COM
K-3
A C T UAT I N G S Y S T E M S
INERTIA BRAKE CONTROLLER
Energize III all electronic brake controller features a patented sensing device that automatically monitors and measures tow vehicle deceleration and applies the trailer brakes in direct proportion. It reacts instantly to any change in brake pedal pressure and ensures controlled, smooth stops. Trailer and tow vehicle stoplights operate automatically when the
ACTUATING SYSTEMS
manual ever trailer brakes applied. manual llever or trailer brakes are app ed. manual lever or trailer brakes are applied ppli
Inertia-activated electric brake controller. For use on single and tandem axle trailers. Includes DX2 electric brake controller, mounting hardware, instruction manual, and quick reference card.
The Voyager incorporates Tekonshas patented braking sensor and is the best value youll find for smooth and secure trailer braking. Its compact size and features, like a bicolored LED brake monitor (to assure a complete connection to trailer brakes and give an indication of relative braking power being applied) make the Voyager extremely versatile. Voyager minimizes interference with tow vehicle electrical systems, uses a four wire hook up, has a broad setting range and is compatible with most any vehicle. The Voyager has all the extra power youll need for trailers with 6 or 8 brake systems. brake systems brake systems. y
A totally proportional electric trailer brake control, the new PrimusIQ is self-leveling so no level adjustment is necessary. Utilizing the primary sensor technology from Prodigy, the PrimusIQ now includes the Boost feature that gives users the ability to apply more initial trailer braking when towing heavier trailers. It works proportionally in reverse for backing into tough spots and includes a snap-in dash mounting clip and removable electrical connector that allows the unit to be quickly stored when not in use. You will appreciate the digital readout depicting a secure electrical connection, amount of voltage delivery to the trailer brakes and diagnostic features incorporated in the LED display.
2010 Copyright by TexTrail, Inc.
WWW.TEXTRAIL.COM
K-4
A C T UAT I N G S Y S T E M S
PROPORTIONAL BRAKE CONTROLLER CONTINUED
Prodigy is the most intelligent brake control. This powerful control features new motion sensor technology similar to what is used in the aerospace industry. With Prodigy no manual level adjustment is necessary, it adjusts itself to varying terrains as you drive. It is equipped with a sensor that detects the tow vehicles rate of deceleration, applies proportional braking to the trailer and features an exclusive BoostSM feature that gives users the ability to apply more initial trailer braking power (especially when towing heavier trailers). For backing into tough spots this is the only inertia control that works proportionally in reverse. A digital display depicts voltage delivery to the trailer during braking and displays continual diagnostics check for proper connection, shorted magnet condition, open ground and much more. A unique pocket mount allows for flexible mounting options (standard mounting bracket included). A quick and easy disconnect feature allows users to remove the control when not in use and store iin a supplied protective pouch. store supplied rotectiv pouch. remo remove the control whe not use and sto n supplied protective p uch move control when ontr hen tore ppli tective h. Th has There has never been a more advanced, yet been advanced d d user friendly, proportional system offered for trailer braking than the Tekonsha P3. In addition to multiple color and contrast options, the LCD display features highly advanced, easy-to-understand roadside diagnostics. P3s convenient features include a dash-hugging design, unique easy-to-use clip-mounting system, quick disconnect for safe storage when not in use and the original Boost feature that allows the driver Part# 6500052 to increase the initial power delivered to the Model 90195 trailer brakes. trailer brakes. aile akes trailer brakes.
Prodigy RF Electronic Brake Control, for 1 to 3 Axle Trailers, Trailer Mounted, Proportional. Utilize for rental businesses, fleet ownerships or multiple tow vehicles. Requires no leveling.
ACTUATING SYSTEMS
- Remote Hand Held Unit - No under dash wiring necessary utilizes wireless communication - The original Boost feature allows for different levels of customized braking Part# 6500060 Model 90250 - System runs continual diagnostics and displays fault codes in units display - Plugs into standard 12-volt power accessory adapter - Trailer Mount (Power Module) Unit - 5 year limited warranty - Utilizes standard sealed 8 blade style 7-way connector - Multiple mounting positions on tongue or front of trailer - 15 year limited warranty on power module - 1 year limited warranty on cord
Brake Control Harness
Packaged Part # 6500049-01 6500039-01 7000003 7000004 Ref # TTBCG49 TTBCH39 56070 56071 Year 05-09 99-06 Make Ford GM Description Brake Control Harness Brake Control Harness 7 Hitch Adapter Harness 7 Hitch Adapter Harness Part # 6500041 6500049 6500040 6500060 6500051 6500062 6500062 7000089 6500039 Ref # 47745 47725 47705 3036 3034 3026 3026 3015 47775 47635 3040 Year 97-10 05-09 94-09 09-10 08-10 09-10 07-09 03-07 99-06 04-10 03-10 Bulk Make
Dodge/Chrysler/Jeep Ford Ford/Mercury/Landrover/Lincoln Ford F-150 Ford Econoline/F-250 thru F-550 GM-Chevy/Buick/GMC GM-Saturn Only GM GM Nissan/Infiniti Toyota/Lexus
Chevy/GMC/Ford Dodge
7000004
7000003
7000332 6500053
WWW.TEXTRAIL.COM
K-5
A C T UAT I N G S Y S T E M S
DICO / TITAN Model 60 Item # Ref # Solenoid Tongue Ball Size Installed Size No Yes 2" 2" 3" 3" Type Drum - Weld /Bolt-On Disc - Weld / Bolt-On Finish Zinc Zinc Capacity 6,000 6,000 Tongue Weight 600 600
ACTUATING SYSTEMS
Item #
Ref #
Solenoid Tongue Ball Size Installed Size Yes Yes 2-5/16" 2-5/16" 3" 3"
DEMCO Model DA91 (with Auto-Lock Coupler) Item # Ref # 8750311 Tongue Solenoid Ball Size Size Installed Yes* 2-5/16" 3" Type Disc - Weld /Bolt-On Finish Zinc Capacity 8,000 Tongue Weight 800
DICO / TITAN Model 10 Item # Ref # Solenoid Tongue Ball Size Installed Size No 2-5/16" 3" Type Drum - Weld /Bolt-On Finish Zinc Capacity 12,500 Tongue Weight 1,250
9050071 4750800
DEMCO Model DA10 Item # Ref # 8101222 Solenoid Tongue Ball Size Installed Size No Yes 3" 3" Type Drum - Weld Disc - Weld Finish Painted Painted Capacity 12,500 12,500 Tongue Weight 1,250 1,250
DICO / TITAN Model 10 Item # Ref # 2478100 9050070 4750600 Solenoid Tongue Ball Size Installed Size No No 2-5/16" 2-5/16" 3" 3" Type Drum - Weld /Bolt-On Disc - Weld / Bolt-On Finish Zinc Zinc Capacity 12,500 12,500 Tongue Weight 1,250 1,250
WWW.TEXTRAIL.COM
K-6
A C T UAT I N G S Y S T E M S
DEMCO Model DA20 Item # Ref # 8202802 8203602 Solenoid Tongue Ball Size Installed Size No Yes 2-5/16" 2-5/16" 3" 3" Type Finish Capacity 20,000 20,000 Tongue Weight 2,000 2,000
ACTUATING SYSTEMS
DICO / TITAN Model 20 Item # Ref # 4042700 4750400 Solenoid Tongue Ball Size Installed Size No No 2-5/16" 2-5/16" 3" 3" Type Drum - Weld /Bolt-On Disc - Weld / Bolt-On Finish Zinc Zinc Capacity 20,000 20,000 Tongue Weight 2,000 2,000
DEMCO Model DA20 Item # Ref # 8204011 Solenoid Tongue Ball Size Installed Size No 2-5/16" 3" Type Drum - Weld Finish Zinc Capacity 20,000 Tongue Weight 2,000
DEMCO Model DA91 Item # Ref # 8759522 Solenoid Tongue Ball Size Installed Size No Yes A-Frame A-Frame Type Drum - Weld Disc - Weld Finish Painted Painted Capacity 8,000 8,000 Tongue Weight 800 800
Ref #
Solenoid Tongue Ball Size Installed Size No 2" A-Frame No 2-5/16" A-Frame
16039
Item #
Ref #
Description
6450624 4748800 Back-up solenoid valve (normally open); inlet 1/8" NPTM and outlet 3/16" F.I.F.
WWW.TEXTRAIL.COM
K-7
A C T UAT I N G S Y S T E M S
Replacement Parts
16500
1844-2
16014
Item #
Description Toledo Actuator Replacement Master Cylinder Kit Toledo Actuator Replacement Cap for Master Cylinder Toledo Actuator Replacement Shock Absorber
ACTUATING SYSTEMS
9050041
1844-2
Description Demco Actuator Replacement Master Cylinder All Drum Models Demco Actuator Replacement Master Cylinder All Disc DA66, DA91 & DA10 Demco Actuator Replacement Cap for Master Cylinder Demco Actuator Replacement Shock for DA66 Demco Actuator Replacement Shock. Fits DA91, DA10 & DA20
Item # 9050021
Description Titan Actuator Replacement Shock Model 60 Titan Actuator Replacement Filler Cap Model 60 Titan Actuator Replacement Master Cylinder - Drum Model 60 Titan Actuator Replacement Master Cylinder - Disc Model 60 Titan Actuator Replacement Shock Model 6 Titan Actuator Replacement Filler Cap Model 6 Titan Actuator Replacement Master Cylinder - Drum Model 6 Titan Actuator Replacement Master Cylinder - Disc Model 6 Titan Actuator Replacement Shock Model 10 Titan Actuator Replacement Filler Cap Model 10 Titan Actuator Replacement Master Cylinder - Drum Model 10 Titan Actuator Replacement Master Cylinder - Disc Model 10 Titan Actuator Replacement Shock Model 20 Titan Actuator Replacement Filler Cap Model 20 Titan Actuator Replacement Master Cylinder - Drum Model 20 Titan Actuator Replacement Master Cylinder - Disc Model 20 Titan Actuator Replacement Multi Fit Coupler Repair Kit Model 6 and 60 Titan Actuator Replacement 2-5/16" Coupler Repair Kit Model 6 Titan Actuator Replacement 2-5/16" Coupler Repair Kit Model 20
K-8
9050062 9050019
47470 12426 12503 23744 47471 7784 12503 23744 47470 40454 43584 18487
WWW.TEXTRAIL.COM
A C T UAT I N G S Y S T E M S
Electro/Hydraulic Brake Actuator Electro/Hydraulic brake actuator provides pressure for 1-3 axles. Brake fluid pressure is proportional to the electronic brake controller signal. Sealed housing provides a weather tight seal. Two year limited warranty. Item # Ref # Description
ACTUATING SYSTEMS
7010004 7010005
K71-650 Dexter Drum Brake Actuator 1000psi K71-651 Dexter Disc Brake Actuator 1600psi
Electro/Hydraulic Brake Actuator Electro/Hydraulic brake actuator provides pressure for 1-3 axles. Brake fluid pressure is proportional to the electronic brake controller signal. Sealed housing provides a weather tight seal. Two year limited warranty. Item # 7010015 6550004 7010010 Ref # 48131 48460 48357 Description Titan Disc Brake Actuator 1500psi Adapter - 06' to current Ford & Chevy OEM Actuator EL/HYD 1500 Psi Brake Rite II Complete
WWW.TEXTRAIL.COM
K-9
A C T UAT I N G S Y S T E M S
Hydraulic Line Kits
Hydraulic Line Kits come complete with all fittings needed to connect hydraulic brake axles. Kits begin with a basic single line kit and with the additional add-on kit you can plumb more brakes. Choose from Steel (with Alum Galfan Finish), Stainless Steel, Torsion or DOT approved Flex line kits. The standard hydraulic brake line kits listed below are designed to be used on trailers using either surge brake actuators or power brake actuators and are manufactured using double wall brazed low carbon steel tubing in accordance with SAE J527.
Ref # 1 2 3 4 5 6 7 8 9 10 11
QTY 1 ea 1 ea 1 ea 1 ea 1 ea 3 ea 3 ea 3 ea 3 ea 3 ea 1 ea
Description
3/16" x 15' Brake Line 3/16" x 72" Brake Line 3/16" x 17.5" Brake Line 18" Flex Brake Line ML/FML Hose Bracket Hose Clip 3/16" IF Union Tee w/ Brkt
Ref # S-100SA
Description
Line Kit - Single Axle DRUM Stainless Stl 3/16" x 15'
ACTUATING SYSTEMS
Tube Clamp Self Tab Screw Axle Strap 1/8 MPT x 3/16 IF Adapter
Item # 9500041
Ref # S-130SA
Description
Line Kit - Add-On for Stainless Stl S-100SA
9500039 AG-130SA Line Kit - Add-On for AG-100SA * USE WITH SINGLE LINE KIT FOR EACH ADDITIONAL AXLE Ref # 1 2 3 4 5 6 7 8 9 10 11 QTY 1 ea 1 ea 1 ea 1 ea 1 ea 1 ea 1 ea 1 ea 1 ea 1 ea 3 ea Desc 3/16" x 30' Brake Line 3/16" x 72" Brake Line 3/16" x 17.5" Brake Line 18" Flex Brake Line ML/FML Hose Bracket Hose Clip 3/16" IF Union Tee w/ Brkt 3/16" IF Adapter Tee Tube Clamp Self Tab Screw Axle Strap
WWW.TEXTRAIL.COM
K-10
A C T UAT I N G S Y S T E M S
Item # 9500042 9500044 Ref # AG-300-TR AG-701-TR
Description
Line Kit - Single Axle Torflex (DISC) 3/16" x 15' Line Kit - Single Axle Torflex (DISC) Deluxe 3/16" x 15'
Ref # 1 2 3 4 5 6 7
QTY 1 ea 1 ea 2 ea 1 ea 2 ea 2 ea 2 ea 4 ea 4 ea 1 ea
Desc 3/16 x 15 Brake Line 3/16 x 72 Brake Line 3/16 x 5 Brake Line 3/16 IF Street Tee 13 Flex Brake Line ML/FML Hose Brkt Hose Clip Tube Clamp Self Tab Screw 1/8 MPT x 3/16 IF Adapter
ACTUATING SYSTEMS
8 9 10
Ref # 1 2 3 4 5 6 7 8 9
QTY 1 ea 1 ea 2 ea 2 ea 2 ea 2 ea 2 ea 2 ea 2 ea
Description 3/16" x 72' Brake Line 3/16" x 30" Brake Line 3/16" x 5" Brake Line 13" Flex Brake Line ML/FML Hose Brkt Hose Clip 3/16" IF Street Tee Tube Clamp Self Tab Screw
Description Line Kit - Add-On for AG-300-TR Line Kit - Add-On for AG-701-TR
WWW.TEXTRAIL.COM
K-11
A C T UAT I N G S Y S T E M S
FLEXIBLE Hydraulic Line Kits Designed to be used on trailers with either surge brake actuators or powered brake actuators, such as the electric over hydraulic. Can be used with drum or disc brakes. Brake lines are DOT flexible hoses approved for use on all trailers. All fittings are brass for ultimate corrosion resistance. Do not exceed 3,000 psi. Item # 9500046 Ref # 1 2 3 7 8 9 10 11 QTY 1 ea 1 ea 1 ea 1 ea 1 ea 3 ea 3 ea 3 ea Ref # F-100-SA Desc 72' FLEX Brake Line
Description
Line Kit - Single Axle "DOT Flex Line"
ACTUATING SYSTEMS
48" FLEX Brake Line 18" FLEX Brake Line 3/16" IF Union Tee w/ Brkt 3/16" IF Adapter Tee Tube Clamp Self-Tap Screw Tie Strap
Ref # 1 2 3 7 8 9 10 11
QTY 1 ea 1 ea 1 ea 1 ea 3 ea 3 ea 3 ea 1 ea
Description
72' FLEX Brake Line 48" FLEX Brake Line 18" FLEX Brake Line 3/16" IF Union Tee w/ Brkt Tube Clamp Self-Tap Screw Tie Strap 1/8 MPT x 3/16 IF Adapter
Item # 9500047
Ref #
Description
WWW.TEXTRAIL.COM
K-12
A C T UAT I N G S Y S T E M S
Tandem Dual Hydraulic Line Kits Designed to be used on longer trailers. Includes 25 feet of main line verses 15 feet in the standard kit. Disc kit includes hoses designed to be used with disc brake calipers with 7/16-20 male ends avoiding the use of additional fittings. Item # 9500015 Ref # 1 2 QTY 1 ea 3 ea 2 ea 2 ea 2 ea 2 ea 2 ea 1 ea 8 ea 8 ea Ref # T-1002 Description 3/16" x 25' Brake Line 3/16" x 51" Brake Line 3/16" x 60" Brake Line 18" Flex Brake Line ML/ FML Hose Brkt Hose Clip 3/16" IF Union Tee w/ Brkt 3/16" IF Street Tee Tube Clamp Self-Tap Screw Description Line Kit - Tandem Dual For Drum
ACTUATING SYSTEMS
3 4 5 6 7 8 9 10
Ref # Item # Ref # Description Line Kit - Tandem Dual w/ Deluxe Hoses 1 2 3 4 5 6 7 8 9 9500014 T-1002D
QTY Description 1 ea 1 ea 2 ea 4 ea 4 ea 4 ea 3 ea 8 ea 8 ea 3/16" x 25' Brake Line 3/16" x 51" Brake Line 3/16" x 60" Brake Line 18" x 7/16-20 Flex Line ML/FML Hose Brkt Hose Clip 3/16" IF Street Tee Tube Clamp Self-Tap Screw
WWW.TEXTRAIL.COM
K-13
A C T UAT I N G S Y S T E M S
ABS TRAILER KITS
Meritor WABCO has been a trailer ABS technology leader since 1993 with ABS offered as standard equipment at all major trailer OEMs. Enhanced Easy-Stop ABS provides unparalleled trailer monitoring and control capabilities to fleet and owner-operators with system configurations to meet virtually any trailer application basic, standard, and premium. These kits provide increased directional stability while meeting FMVSS-121 requirements for ABS air brake systems and offer the benefits of reduced tire flat spotting and trailer swing.
Part #
6050017-02 6050018-02 6050008 6050009
Description Tandem Axle ABS kit - One Axle ABS Tandem Axle ABS kit - Two Axles ABS Air Tubing - 3/8" Blue sold per foot Air Tubing - 3/8" Red sold per foot
ACTUATING SYSTEMS
TK-3000 Up to 1 ton w/ 30' Vac. Hose TK-3050 Up to 1 ton w/ 50' Vac. Hose TK-3100 Over 1 ton w/ 30' Vac. Hose TK-3150 Over 1 ton w/ 50' Vac. Hose TK-4050 Air / Hydraulic Truck Booster Kit
Then UNIVERSAL ELECTRIC vacuum pump kit provides a vacuum source for the diesel and EFI engine trucks with vacuum / hydraulic brake trailer. This is a direct drive 12V pump that requires NO pulleys or belts.
WWW.TEXTRAIL.COM
K-14
L-28 L-20 L-30 L-23 thru L-24 L-35 L-31 L-26 L-2, L-7 & L-13 L-28 L-38 L-24 thru L-25 L-28 thru L-34 L-22 L-2 L-25 thru L-26 L-2, L-9 & L-17 L-13 L-22 L-13 L-2 & L-7 L-2 L-38 L-13 & L-20 L-26 L-2 L-23 thru L-24 L-30 L-38 L-38 L-22 L-2, L-10 & L-18 L-30 thru L-31 L-31 L-22 L-28 L-11 & L-19 L-12 & L-22 L-35 thruL-37 L-28
2010 Copyright by TexTrail, Inc.
LED Lighting
Part# 8100594 8100593 8100628 8100644 8100645 8100646 8100625 8100626 8100641 8100640 8100627 8100651 8100648 Ref # Diode Type AL-90AB 1 Mini AL-90RB 1 Mini MCL-83RB 1 Mini MCL-61AB 2 Thinline MCL-61RB 2 Thinline MCL-61ARB 2 Thinline MCL-56AB 1 2" Round MCL-56RB 1 2" Round MCL-527AB 2 2-1/2" Round MCL-527RB 2 2-1/2" Round STL-12RB 6 6" Oval STL-73RB 6 6" Oval STL-13RB 7 4" Round Hole Size Clearance / Marker Clearance / Marker Identification Light Bar Clearance / Marker Clearance / Marker Fender Light Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Stop, Tail & Turn Stop, Tail & Turn Stop, Tail & Turn Description Amber LED Fleet Count Light Red LED Fleet Count Light Red LED Fleet Count Light Amber LED Fleet Count Light Red LED Fleet Count Light Amber & Red LED Fleet Count Light Amber LED Fleet Count Light Red LED Fleet Count Light Amber LED Fleet Count Light Red LED Fleet Count Light Red LED Fleet Count Light Red LED Fleet Count Light Red LED Fleet Count Light
8100625 8100626
8100641 8100640
8100535
8100603
8100638
8100639
8100602
8100488
8100649 8100557
8100636 8100637
8100601
Part# Ref # Diode Type 8100535 MCL-50AB 9 2" Round 8100603 MCL-50RB 8 2" Round 8100638 MCL-502AB 3 2" Round 8100639 MCL-502RB 3 2" Round 8100602 MCL-51AB 3 2-1/2" Round 8100488 MCL-51RB 3 2-1/2" Round 8100600 MCL-17AB 3 4-3/16" Oblong 8100601 MCL-17RB 3 4-3/16" Oblong 8100636 MCL-19AB 4 5-3/4" Oblong 8100637 MCL-19RB 4 5-3/4" Oblong 8100604 MCL-63AB 4 Thinline 8100605 MCL-63RB 4 Thinline 8100615 MCL-63AK 4 Thinline 8100616 MCL-63RK 4 Thinline 8100608 AL-191AB 3 Mini Thinline 8100609 AL-191RB 3 Mini Thinline 8100534 STL-35AB 16 Rectangular 8100563 STL-35RB 16 Rectangular 8100557 STL-22RB 12 6" Oval 8100654 STL-22RK 12 6" Oval 8100649 STL-22AB 16 6" Oval 8100610 STL-23RB 12 4" Round 8100611 STL-23RK 12 4" Round 8100612 STL-23RK 12 4" Round 8100650 STL-23AB 16 4" Round
Hole Size Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Stop, Turn & Tail Stop, Turn & Tail Stop, Turn & Tail Stop, Turn & Tail Park & Turn Signal Stop, Turn & Tail Stop, Turn & Tail Stop, Turn & Tail Park & Turn Signal
L-2
Description Micro-Flex Sealed Amber LED Light Micro-Flex Sealed Red LED Light Micro-Flex Sealed Amber LED Light Micro-Flex Sealed Red LED Light Micro-Flex Sealed Amber LED Light Micro-Flex Sealed Red LED Light Micro-Flex Surface Mount Sealed Amber LED Light Micro-Flex Surface Mount Sealed Red LED Light Micro-Flex Surface Mount Sealed Amber LED Light Micro-Flex Surface Mount Sealed Red LED Light Micro-Flex Sealed Amber LED Light Micro-Flex Sealed Red LED Light Micro-Flex Sealed Amber LED Light Kit Micro-Flex Sealed Red LED Light Kit Micro-Flex Sealed Amber LED Light Micro-Flex Sealed Red LED Light Micro-Flex Flush Mount Amber LED Light Micro-Flex Flush Mount Red LED Light Micro-Flex Sealed Flush Mount Red LED Light Micro-Flex Sealed Flush Mount Red LED Light Kit Micro-Flex Sealed Flush Mount Amber LED Light Micro-Flex Sealed Flush Mount Red LED Light Micro-Flex Sealed Flush Mount Red LED Light Straight Kit Micro-Flex Sealed Flush Mount Red LED Light Right Kit Micro-Flex Sealed Flush Mount Amber LED Light
WWW.TEXTRAIL.COM
MANDATORY REQUIREMENTS
MIN QNTY
2 2 2 2
FUNCTIONAL PURPOSE
Indicates vehicles presence and width Indicate braking
COLOR
LOCATION
Tail Lamps Stop Lamps 1 Rear Turn Signal Lamps Rear Reflex Reflectors License Plate Lamps
On the rear - symmetrical-as far apart as practicable On the rear - symmetrical-as far apart as practicable On the rear - symmetrical-as far apart as practicable On the rear - symmetrical-as far apart as practicable facing rearward
(L)
White
Front and rear side marker lamps / side reflectors indicate vehicles presence and length
Red
(A)
Red
4a
Front and rear side marker lamps / side reflectors indicate vehicles presence and length
Yellow
Each side at front - as far forward as practicable Each side at front - as far forward as practicable - facing sideward
4b
(A)
Yellow
ADDITIONAL EQUIPMENT FOR TRAILERS EXCEEDING THE FOLLOWING PARAMETERS LENGTH 9.1M (30FT) OR LONGER
DESCRIPTION
AREA EQUIPMENT
Intermediate Side Marker Lamps Intermediate Side Reflex Reflectors
MANDATORY REQUIREMENTS
MIN QNTY
2 2
FUNCTIONAL PURPOSE
Indicate presence of a long vehicle Indicate presence of a long vehicle
COLOR
LOCATION
5a 5b
Yellow Yellow
Each side near center - facing sideward Each side near center - facing sideward
WWW.TEXTRAIL.COM
L-3
MANDATORY REQUIREMENTS
FUNCTIONAL PURPOSE
Show vehicles width - MAY NOT be combined with tail lights
MIN QNTY
COLOR
LOCATION
Red
(P2 or P3)
3 (Exact)
Red
On the rear-center facing rearward-horizontally spaced 150mm (6in) to 300mm (12in) apart
Yellow
As high as practicable
MANDATORY REQUIREMENTS
LOCATION HEIGHT mm (in.) FROM GROUND OPTIONS
White
At the top
10
Continuous
No requirement
Reflectors may not be required if they are replaced, in their required location. OPTIONAL IN CANADA
11
Continuous
As horizontal as practicable and as close as practicable to the range of 375 to 1525mm from the ground
12
Side Marking
See location
Rear lower body and side conspicuity treatment may also be solid white, solid yellow, or white & yellow
NOTE: This information is provided as guidance only. Tex Trail encourages all of our customers to check with your local and federal governing agencies for changes to this guidance. State or Provincial regulations, where they may apply, have not been included. This table summarizes lighting equipment requirements contained in Federal/Canada Motor Vehicle Safety Standard 108. For complete compliance requirements consult Title 49 - Code of Federal Regulations-Section 571.108 (USA) or Section 108 of the Motor Vehicle Safety Regulations (Canada).
WWW.TEXTRAIL.COM
L-4
WWW.TEXTRAIL.COM
L-5
WWW.TEXTRAIL.COM
L-6
Description
Square LED Marker/Clearance Light with Reflective Lens. Black stud mount base. Includes lead and ground wires. Screw-on replaceable lens. Color: Amber Square LED Marker/Clearance Light with Reflective Lens. Black stud mount base. Includes lead and ground wires. Screw-on replaceable lens. Color: Red
8100484
MCL-36RB
8100486
MCL-45RB
8100487
MCL-21RB
8100376
MCL-31RB
WWW.TEXTRAIL.COM
L-7
Ref #
MCL-55AB
Description
2 Round Sealed Multiple Diode LED Marker / Clearance Light. Requires mounting grommet and industry standard 2-prong plug. 4-diode 0.97A / 12.8V Color: Amber 2 Round Sealed Multiple Diode LED Marker / Clearance Light. Requires mounting grommet and industry standard 2-prong plug. 3-diode 0.108A/12.8V Color: Red
81000378
MCL-55RB
8100514
MCL-57AB
2-1/2 Round Sealed Multiple Diode LED Marker / Clearance Light. Requires mounting grommet and industry standard 2-prong plug. 4-diode 0.96A / 12.8V Color: Amber 2-1/2 Round Sealed Multiple Diode LED Marker / Clearance Light. Requires mounting grommet and industry standard 2-prong plug. 3-diode 0.108A/12.8V Color: Red
8100513
MCL-57RB
8100454
MCL-65ARB
Thin Line Sealed LED Fender Light. Requires mounting bracket and plug. 6-diode 0.048A / 12.8V. Thin Line Sealed LED Fender Light. Includes mounting bracket and plug. 6-diode 0.048A / 12.8V.
8100473
MCL-67ARB
Part #
8100011
Ref #
MCL-75AB
Description
Thin Line Sealed LED Marker/Clearance Light. Requires mounting bracket and plug. 4-diode 0.048A / 12.8V Color: Amber Thin Line Sealed LED Marker/Clearance Light. Requires mounting bracket and plug. 4-diode 0.048A / 12.8V Color: Red Thin Line Sealed LED Marker/Clearance Light. Requires mounting bracket and plug. 6-diode 0.048A / 12.8V Color: Amber Thin Line Sealed LED Marker/Clearance Light. Requires mounting bracket and plug. 6-diode 0.048A / 12.8V Color: Red
8100013
MCL-75RB
8100452
MCL-65AB
8100453
MCL-65RB
8100004
Thin Line Sealed LED Marker/Clearance Light. Requires MCL-65CAB mounting bracket and plug. 6-diode 0.048A / 12.8V Color: Clear with Amber Diodes Thin Line Sealed LED Marker/Clearance Light. Requires MCL-65CRB mounting bracket and plug. 6-diode 0.048A / 12.8V Color: Clear with Red Diodes MCL-67AB Thin Line Sealed LED Marker/Clearance Light. Requires mounting bracket and plug. 6-diode 0.048A / 12.8V Color: Amber Thin Line Sealed LED Marker/Clearance Light. Requires mounting bracket and plug. 6-diode 0.048A / 12.8V Color: Red
L-8
8100005
8100474
8100472
MCL-67RB
WWW.TEXTRAIL.COM
Ref #
MC-82AB
Description
Armored Die Cast LED Marker/Clearance Light. Includes gasket and lead and ground wires. 6-diode 0.160A / 12.8V Color: Amber Armored Die Cast LED Marker/Clearance Light. Includes gasket and lead and ground wires. 6-diode 0.160A / 12.8V Color: Red
8100529
MC-82RB
8100460
AL-91AB
Mini Thin Line Sealed LED Marker/Clearance Light. Requires industry standard 2-prong plug and mounting bracket. 3-diode 0.051A / 12.8V Color: Amber Mini Thin Line Sealed LED Marker/Clearance Light. Requires industry standard 2-prong plug and mounting bracket. 3-diode 0.051A / 12.8V Color: Red
8100461
AL-91RB
Part #
8100524
Ref #
MCL-91AB
Description
Mini Thin Line Sealed LED Marker/Clearance Light. Includes chrome self-grounding mounting base, gasket and 12 single lead wire. 3-diode 0.051A / 12.8V Color: Amber Mini Thin Line Sealed LED Marker/Clearance Light. Includes chrome self-grounding mounting base, gasket and 12 single lead wire. 3-diode 0.051A / 12.8V Color: Red Mini Thin Line Sealed LED Marker/Clearance Light. Includes black self-grounding hard wired mounting base with gasket. 3-diode 0.051A / 12.8V Color: Amber Mini Thin Line Sealed LED Marker/Clearance Light. Includes black self-grounding hard wired mounting base with gasket. 3-diode 0.051A / 12.8V Color: Red
8100392
MCL-91RB
8100431
MCL-96AB
8100362
MCL-96RB
Ref #
STL-76RB
Description
Thin Line Dual Lens Sealed LED Stop / Turn / Tail Light with replaceable red snap-on lens. Clear polycarbonate inner lens is sonic welded to housing. Requires ground wire. 11-diode 0.275/0.022A / 12.8V Color: Red
8100490
MCL-78RB
Thin Line LED Identification Light Bar for over 80 applications. Includes lead and ground wire. 3-diode 0.022A / 12.8V Color: Red Thin Line LED Identification Light Bar for over 80 applications. Includes lead and ground wire. 3-diode 0.022A / 12.8V Color: Clear with Red Diodes
8100491
MCL-88RGB
8100490
8100491
WWW.TEXTRAIL.COM
L-9
Ref #
MCL-93RB
Description
Sealed LED Identification Light Bar with three (3) replaceable Mini Thin Line Sealed LED Marker/ Clearance Lights (8100461) on a black molded housing for over 80 applications. Includes ground wire and 50 lead wire. 9-diode 0.051A / 12.8V Color: Red Sealed LED Identification Light Bar with three (3) replaceable Mini Thin Line Sealed LED Marker/ Clearance Lights (8100461) on a polished, stainless steel housing for over 80 applications. Includes ground wire and 50 lead wire. 9-diode 0.051A / 12.8V Color: Red
8100489
MCL-84RB
8100363
8100489
8100428
MCL-97RB
Sealed LED Identification Light Bar with three (3) sealed LED marker/clearance lights on a stainless steel housing for over 80 applications. Single wire design grounds through mounting hardware. 9-diode 0.058A / 12.8V Color: Red
Description
Universal stud-mounted stop/turn/tail LED light for over 80 applications. 7-function: stop, turn, tail, rear reflex, side marker, rear clearance and side reflex. Includes screw-on replaceable lens with gasket. Mounts on 2 centers and grounds through mounting studs. 18-diode 0.268/0.059A / 12.8V Color: Red Same as 8100365 plus 8th function is a license illuminator. 23-diode 0.268/0.114A / 12.8V Color: Red
Description
Universal stud-mounted stop/turn/tail LED light for under 80 applications. 6-function: stop, turn, tail, rear reflex, side marker, and side reflex. Includes screw-on replaceable lens. Mounts on 2 centers and includes grounds wire. 16-diode 0.259/0.062A / 12.8V Color: Red Same as 8100368 plus 7th function is a license illuminator. 21-diode 0.254/0.112A / 12.8V Color: Red
WWW.TEXTRAIL.COM
L-10
8100517
STL-16RB
8100518
STL-17RB
8100519
STL-33RB
Rectangular Sealed LED Stop/Turn/Tail Light for flush mount application. Requires mounting grommet and 3-prong plug. 12-diode 0.405/0.038A / 12.8V Color: Red Rectangular Sealed LED Stop/Turn/Tail Light for flush mount application. Includes mounting grommet and 3-prong plug. 12-diode 0.405/0.038A / 12.8V Color: Red
8100522
STL-34RB
Part #
8100482
Ref #
STL-72AB
Description
6 Oval Sealed LED Parking/Rear Turn Signal Light for flush mount application. Requires industry standard 3-prong plug and mounting grommet. 10-diode 0.275/0.042A / 12.8V Color: Amber+ 6 Oval Sealed LED Stop/Turn/Tail Light for flush mount application. Requires industry standard 3-prong plug and mounting grommet. 10-diode 0.243/0.046A / 12.8V Color: Red
8100367
STL-72RB
8100482
8100367
8100526
STL-78AB
6 Oval Sealed LED Parking/Rear Turn Signal Light for flange mount application. Does not require panel cutout. Includes 3-wires for installation. 10-diode 0.275/0.042A / 12.8V Color: Amber 6 Oval Sealed LED Stop/Turn/Tail Light for flange mount application. Does not require panel cutout. Includes 3-wires for installation. 10-diode 0.243/0.046A / 12.8V Color: Red
8100372
STL-78RB
8100526
8100372 L-11
WWW.TEXTRAIL.COM
8100496
STL-42AB
8100483
STL-42RB
8100276
STL-43AB
4 Round Sealed LED Parking/Rear Turn Signal Light for flush mount application. Requires mounting grommet and industry standard 3-prong plug. 10-diode 0.310/0.046A / 12.8V Color: Amber 4 Round Sealed LED Stop/Turn/Tail Light for flush mount application. Requires mounting grommet and industry standard 3-prong plug. 10-diode 0.413/0.026A / 12.8V Color: Red
8100370
STL-43RB
8100329
STL-43AKB
4 Round Sealed LED Parking/Rear Turn Signal Light for flush mount application. Includes mounting grommet and industry standard 3-prong plug. 10-diode 0.310/0.046A / 12.8V Color: Amber 4 Round Sealed LED Stop/Turn/Tail Light for flush mount application. Includes mounting grommet and 3-prong plug. 10-diode 0.413/0.026A / 12.8V Color: Red
8100271
STL-43RKB
8100374
BUL-72CB
8100373
BUL-72CB
8100020
BUL-43CB
WWW.TEXTRAIL.COM
L-12
Ref #
LPL-31CB
Description
Mini LED Polished Chrome-plated License Plate Light. Includes lead and ground wires. 2-diode 0.027A / 12.8V Armored LED Polished Chrome-plated License Plate Light. Includes lead and ground wires. 5-diode 0.054A / 12.8V
8100495
LPL-41CB
Ref #
MC-11AB
Description
Mini Rectangular Marker/Clearance Light. Features snap-on lens, a durable plastic base and single wire design that grounds through mounting hardware. Color: Amber Mini Rectangular Marker/Clearance Light. Features snap-on lens, a durable plastic base and single wire design that grounds through mounting hardware. Color: Red
L-13
8100138
MC-11RB
WWW.TEXTRAIL.COM
Ref #
MC-36AB
Color
Amber
Description
Square Marker/Clearance Light with Reflective Lens. Single wire design grounds through mounting stud. Black plastic molded housing. Screw-on replaceable lens. Color: Amber Square Marker/Clearance Light with Reflective Lens. Single wire design grounds through mounting stud. Black plastic molded housing. Screw-on replaceable lens. Color: Red Square Marker/Clearance Light with Reflective Lens. Single wire design grounds through mounting stud. Ear-mount black plastic molded housing. Screw-on replaceable lens. Color: Amber Square Marker/Clearance Light with Reflective Lens. Single wire design grounds through mounting stud. Ear-mount black plastic molded housing. Screw-on replaceable lens. Color: Red
8100444
MC-36RB
Red
8100092
MC-35AB
Amber
8100094
MC-35RB
Red
8100379
MC-37AB
Amber
Square Marker/Clearance Light with Reflective Lens and Side Reflex. Single wire design grounds through mounting stud. Color: Amber Oval Marker/Clearance Light with Reflective Lens. Includes a replaceable snap-on lens and a single wire design that grounds through the mounting hardware. Mounts on 3 centers. Oval Marker/Clearance Light with Reflective Lens. Includes a replaceable snap-on lens and a single wire design that grounds through the mounting hardware. Mounts on 3 centers. Double Bulls eye Marker/Clearance Light with black base. Includes a two-bulb design with a replaceable, snap-on lens. Grounds through mounting hardware on 3 centers. Color: Amber Double Bulls eye Marker/Clearance Light with black base. Includes a two-bulb design with a replaceable, snap-on lens. Grounds through mounting hardware on 3 centers. Color: Red 4 Rectangular Marker/Clearance Light with Reflective Lens. Includes a replaceable, snap-on lens and the lead wire and grounding wire. Mounts on 3 centers. Color: Amber 4 Rectangular Marker/Clearance Light with Reflective Lens. Includes a replaceable, snap-on lens and the lead wire and grounding wire. Mounts on 3 centers. Color: Red
8100497
MC-38AB
Amber
8100498
MC-38RB
Red
8100499
MC-42AB
Amber
8100500
MC-42RB
Red
8100437
MCL-44AB
Amber
8100436
MCL-44RB
Red
WWW.TEXTRAIL.COM
L-14
Ref #
MC-66AB
Color
Amber
Description
4 Oval Two-Bulb Marker/Clearance Light. Includes a replaceable, snap-on lens, and the lead and ground wire. Color: Amber 4 Oval Two-Bulb Marker/Clearance Light. Includes a replaceable, snap-on lens, and the lead and ground wire. Color: Red
8100433
MC-66RB
Red
8100292
MCL-68AB
Amber
3-1/2 Thinline Oblong Marker/Clearance Light. Includes a replaceable, snap-on lens, a gasket, and a single wire design that mounts through hardware. Color: Amber 3-1/2 Thinline Oblong Marker/Clearance Light. Includes a replaceable, snap-on lens, a gasket, and a single wire design that mounts through hardware. Color: Red
8100293
MCL-68RB
Red
8100290
MC-52AB
Amber
2 Sealed Flange Mount Round Marker / Clearance Light. Requires industry standard 2-prong plug. 2 Sealed Flange Mount Round Marker / Clearance Light. Requires industry standard 2-prong plug.
8100291
MC-52RB
Red
8100380
MC-53AB
Amber
2 Sealed Round Marker/Clearance Light. Requires mounting grommet and industry standard 2-prong plug. 2 Sealed Round Marker/Clearance Light. Requires mounting grommet and industry standard 2-prong plug.
8100381
MC-53RB
Red
8100501
MC-55AB
Amber
2-1/2 Sealed Round Marker/Clearance Light. Requires mounting grommet and industry standard 2-prong plug. 2-1/2 Sealed Round Marker/Clearance Light. Requires mounting grommet and industry standard 2-prong plug.
8100502
MC-55RB
Red
8100458
MC-57AB
Amber
2-1/2 Sealed Round Marker/Clearance Light with Reflective Lens. Requires mounting grommet and industry standard 2-prong plug. 2-1/2 Sealed Round Marker/Clearance Light with Reflective Lens. Requires mounting grommet and industry standard 2-prong plug.
L-15
8100459
MC-57RB
Red
WWW.TEXTRAIL.COM
Ref #
MC-58AB
Color
Amber
Description
2-1/2 Round Marker/Clearance Light. Single wire design grounds through mounting hardware. Includes a replaceable, snap-on lens. Color: Amber 2-1/2 Round Marker/Clearance Light. Single wire design grounds through mounting hardware. Includes a replaceable, snap-on lens. Color: Red
8100103
MC-58RB
Red
8100157
MC-65ARB
Amber/Red
Sealed Dual-Bulb Rectangular Fender Light that functions as an amber front clearance light and a red rear clearance light for over 80 applications. Mounts on 3 centers. Requires mounting bracket and plug. Color: Amber/Red Sealed Double-Bulb Marker/Clearance Light. Requires mounting bracket and plug assembly. Color: Amber Sealed Double-Bulb Marker/Clearance Light. Requires mounting bracket and plug assembly. Color: Red Sealed Double-Bulb Marker/Clearance Light. Includes mounting bracket and plug assembly. Color: Amber Sealed Double-Bulb Marker/Clearance Light. Includes mounting bracket and plug assembly. Color: Red Pre-wired Fender Light Assembly that functions as a amber front clearance light and a red rear clearance light for over 80 applications. Mounts on top or side of most fenders to mark the widest point on the trailer. Assembly includes (1) 8100175, (1) 8100174, and a fender mount assembly. Left side assembly. Pre-wired Fender Light Assembly that functions as a amber front clearance light and a red rear clearance light for over 80 applications. Mounts on top or side of most fenders to mark the widest point on the trailer. Assembly includes (1) 8100175, (1) 8100174, and a fender mount assembly. Right side assembly.
8100175
MC-65AB
Amber
8100174
MC-65RB
Red
8100038
154KA
Amber
8100039
154KR
Red
8100228
BA-65ARLB
Amber/Red
8100229
BA-65ARRB
Red/Amber
WWW.TEXTRAIL.COM
L-16
Ref #
A-91AB
Description
Mini Thin Line Sealed Marker/Clearance Light. Includes single-wire male plug and black mounting bracket. Color: Amber Mini Thin Line Sealed Marker/Clearance Light. Includes single-wire male plug and black mounting bracket. Color: Red
8100105
A-91RB
8100391
MC-92AB
Mini Thin Line Sealed Marker/Clearance Light. Includes single-wire male plug and black mounting bracket. Color: Amber
8100448
MC-92RB
Mini Thin Line Sealed Marker/Clearance Light. Includes single-wire male plug and black mounting bracket. Color: Red
8100098
MC-81AB
Chrome Plated Marker/Clearance Light. Includes a replaceable, snap-on lens and a single wire design that mounts through mounting hardware. Color: Amber Chrome Plated Marker/Clearance Light. Includes a replaceable, snap-on lens and a single wire design that mounts through mounting hardware. Color: Red Sealed Steel Armored Marker/Clearance Light. Includes a replaceable, snap-on lens, a gasket, and a single wire design that mounts through mounting hardware. Color: Amber Sealed Steel Armored Marker/Clearance Light. Includes a replaceable, snap-on lens, a gasket, and a single wire design that mounts through mounting hardware. Color: Red
8100099
MC-81RB
8100081
J-550-A
81000153
J-550-R
Ref #
MC-93RB
Description
Sealed Identification Light Bar with three (3) replaceable Mini Thin Line Sealed Marker/Clearance Lights (8100105) on a black molded housing for over 80 applications. Includes ground wire and 50 lead wire. Color: Red
8100396
MC-77RB
Identification Light Bar with three (3) replaceable, snap-on Thin Line Oblong Marker/ Clearance Lights (8100293) on a white metal housing for over 80 applications. Includes ground wire and 50 lead wire. Color: Red
WWW.TEXTRAIL.COM
L-17
Ref #
MC-99AB
Description
Identification Light Bar with three (3) replaceable, snap-on Mini Marker/ Clearance Lights (8100139) on a white metal base. Single wire design grounds through mounting hardware. Includes 50 lead wire. Color: Amber
8100134
MC-99RB
Identification Light Bar with three (3) replaceable, snap-on Mini Marker/ Clearance Lights (8100139) on a white metal base. Single wire design grounds through mounting hardware. Includes 50 lead wire. Color: Red
8100389
ST-2RB
Description
8100477
ST-2AB
Universal stud-mounted stop/turn/tail light for under 80 applications. 6-function: stop, turn, tail, rear reflex, side marker, and side reflex. Includes screw-on replaceable lens. Mounts on 2 centers and includes grounds wire. Color: Red Same as 8100477 plus 7th function is a license illuminator. Color: Red
8100478
ST-2AB
TRAILERS OVER 80
Waterproof universal mount 3-wire stop/turn/tail light for over 80 applications. 7-function: stop, turn, tail, rear clearance, rear reflex, side marker, and side reflex. Includes screw-on replaceable lens and separate ground wire. Color: Red Same as 8100196 plus 8th function is a license illuminator. Color: Red
8100196
ST-16RB
8100195
ST-17RB
WWW.TEXTRAIL.COM
L-18
Ref#
ST-33AB
Color
Amber
Description
Rectangular Sealed Parking / Rear Turn Signal for flush mount application. Requires mounting grommet and 3-prong plug. Color: Amber Rectangular Sealed Stop/Turn/Tail Light for flush mount application. Requires mounting grommet and 3-prong plug. Color: Red Rectangular Sealed Stop/Turn/Tail Light for flush mount application. Includes mounting grommet and 3-prong plug. Color: Red 4-3/8 Round stud-mounted, black polymer housed light. 6-function: stop, turn, tail, rear reflex, side marker, and side reflex. Includes snap-on replaceable lens. Mounts on 2 centers and grounds through two 1/4 studs. Same as 8100520 plus 7th function is a license illuminator.
8100533
ST-33RB
Red
8100402
ST-34RB
Red
8100520
ST-24RB
Red
8100509
ST-25RB
Red
Part #
Ref #
Description
Universal stud-mounted stop/turn/tail light for surface mount application. Functions: stop, turn, tail, back-up and license light. Grounds through mounting studs. Includes screw-on replaceable lens. Mounts on three 1/4 studs. Color: Red Same as 8100418 except Clam Packaged. Color: Red 4.5 Round flush mount stop/turn/tail light with acrylic lens, durable black steel housing and snap-in lens ring. Includes 2 wire leads and grounds through mounting hardware. Color: Red Snap Ring for mounting 4 round lights. Snap-in bracket. 4 Sealed round flush mount parking and rear turn Signal light. Includes mounting grommet and industry standard 3-prong plug. Color: Red 4 Sealed round flush mount stop/turn/tail light. Includes mounting grommet and industry standard 3-prong plug. Color: Red 4 Sealed round flush mount stop/turn/tail light. Requires mounting grommet and industry standard 3-prong plug. Color: Red 4 Sealed round flush mount stop/turn/tail light with reflex lens. Requires mounting grommet and industry standard 3-prong plug. Color: Red
L-19
8100546
ST-60RB
8100108
ST-60RB
8100187
ST-40RB
8100314
A-40SRB
8100080
ST-44AB
8100521
ST-44RB
8100165
ST-45RB
8100471
ST-46RB
WWW.TEXTRAIL.COM
8100145
ST-51RS
Part #
8100386
Ref #
ST-70RB
Description
6 Sealed Oval stop/turn/tail light for flush mount application. Requires mounting grommet and industry standard 3-prong plug. Color: Red 6 Sealed Oval stop/turn/tail light for flush mount application. Includes mounting grommet and industry standard 3-prong plug. Color: Red 6 Sealed Oval parking / rear turning Signal light for flush mount application. Includes mounting grommet and industry standard 3-prong plug. Color: Amber
8100445
ST-74RB
8100176
ST-74AB
Ref #
ST-75AB
Description
6 Sealed Oval mid-ship turn Signal and side marker with reflex lens. Requires mounting grommet and industry standard 3-prong plug. Color: Amber 6 Sealed Oval mid-ship turn Signal and side marker with reflex lens. Includes mounting grommet and industry standard 3-prong plug. Color: Amber
8100182
ST-77AB
Ref #
LP-11CB
Description
Chrome Plated Snap-in License Plate / Utility / Dash Light with replaceable bulb. Mounts in 1-1/4 diameter hole. Single wire design grounds through mounting hardware. Two units required for legal license illumination. Chrome Plated Armored Steel License Plate Light with replaceable bulb. Mounts on 2 centers. Single wire design grounds through mounting hardware.
8100090
LP-21CB
8100385
LP-31CB
Chrome Plated License Plate Light with replaceable bulb. Mounting ears for surface mounting on 2 centers. Includes a water resistance gasket, and lead and ground wires. License Plate Light with gray poly coated housing and replaceable bulb. Mounting ears for surface mount on 3-1/4 centers. Includes weather-tight gasket seal and a single wire design that grounds through mounting hardware. Hardware separate. Same as 8100506 plus with a black steel license plate bracket.
8100506
LP-51CB
8100132
LP-52CB
WWW.TEXTRAIL.COM
L-20
Ref #
BU-33CB
Description
Sealed Flush Mount Rectangular Back-Up Light. Requires industry standard 2-prong plug and mounting grommet.
8100255
BU-45CB
Sealed 4 Round Flush Mount Back-Up Light. Requires industry standard 2-prong plug and mounting grommet.
8100256
BU-44CB
Sealed 4 Round Flush Mount Back-Up Light. Includes industry standard 2-prong plug and mounting grommet.
8100465
BU-70CB
Sealed 6 Oval Flush Mount Back-Up Light. Requires industry standard 2-prong plug and mounting grommet.
8100136
BU-74CB
Sealed 6 Oval Flush Mount Back-Up Light. Includes industry standard 2-prong plug and mounting grommet.
8100118
TL-27BK
8100118-01
Same as 8100118 in clam package. Same as 8100118 except with a 25 wiring harness. Same as 8100120 in clam package.
8100197
TL-21RK
Towing Light Kit includes (2) Magnetic mount round red stop/turn/tail lights and 25-feet of wiring harness with a 4-flat plug.
WWW.TEXTRAIL.COM
L-21
Ref #
IL-21CB
Color
Clear
Description
Rectangular Weatherproof Interior / Exterior Surface Mount Dome Light with a replaceable, snap-on polycarbonate lens. Mounts on 3.5 centers. Includes ground and lead wires and an on/off switch. Round Surface Mount Interior Dome Light with On-Off Switch. Aluminum base with translucent lens. Single wire design grounds through mounting base. Rectangular Surface Mount Utility / Porch Light. White housing with separate ground wire. Includes a replaceable, snap-on lens. Rectangular Surface Mount Utility / Porch Light with On-Off Switch. White housing with separate ground wire. Includes a replaceable, snap-on lens. Oval Surface Mount Utility / Porch Light with On-Off Switch. White housing with separate ground wire. Includes a replaceable, snap-on lens.
8100226
IL-61CB
Clear
8100253
RV-PL1C
Clear
8100037
RV-PL3C
Clear
8100257
RV-PL7C
Clear
Ref #
TL-35FS Clear
Description
3 x 5 Utility / Tractor Flood Beam Heavy-duty Light. Polycarbonate black housing including mounting hardware and a 55-watt halogen light. 3 x 5 Utility / Tractor Flood Beam Heavy-duty Light. Polycarbonate black housing including mounting hardware and a 55-watt halogen light. Clam Package.
8100572
TL-35TB
Clear
8100250
TL-46FB
Clear
4 x 6 Utility / Tractor Flood Beam Heavy-duty Light. Polycarbonate black housing including mounting hardware and a 55-watt halogen light. 4 x 6 Utility / Tractor Flood Beam Heavy-duty Light. Polycarbonate black housing including mounting hardware and a 55-watt halogen light. Clam Package.
8100652
TL-46TS
Clear
8100281
TL-10CB
Clear
5 Round Utility / Tractor Flood Beam Heavy-duty Light. Shock proof rubber housing with sealed beam bulb. 6 lead and ground wires. Adjustable plated steel bracket. Universal 5/16 mounting post.
8100012
RB-10A
Amber
Amber Rotary Beacon / Warning Light. Includes 12-Volt plug with coil cord.
WWW.TEXTRAIL.COM
L-22
Ref #
1049R
Finish
Raw
Description
Steel Light Protector Right Hand. For Stop/Turn/Tail
8100149
1052L
Raw
Steel Light Protector Left Hand with license light cutout. For Stop/Turn/Tail Light.
5350210
8128L
Raw
Steel Light Protector Left Hand. For Stop/Turn/Tail Light. Cut-out for 2 Side Marker. Steel Light Protector Right Hand. For Stop/Turn/Tail Light. Cut-out for 2 Side Marker. Steel Weld-On Light Plus License Plate Bracket. For Standard Stop/Turn/Tail Light. Bracket is 5-3/4 tall x 14 Gauge x 7-3/4 long inverted L. Elongated slot for stud mount lights. Two holes for standard dimension license plate and bolts. Steel Z-Style Light Bracket. For Big Tex Dump Trailers.
5350211
8128R
Raw
5350082
8147
Raw
5350371
8101
Raw
5350392
1131
Raw
5350085
8122
Raw
Steel Light Bracket. 12 GA. For stud mount clearance / marker light.
5350077
8217
Raw
8100143
BK-70BB
Black
Black Power Coated Steel Oval Light Bracket. For 6 oval lights. Requires grommet part number 8100387 for installation. Color: Black
8100142
BK-45BB
Black
Black Power Coated Steel Round Light Bracket. For 4 round lights. Requires grommet part number 8100430 for installation. Color: Black
WWW.TEXTRAIL.COM
L-23
Ref #
LP-5SB
Color
Black
Description
Rust Proof Straight Polymer License Plate Bracket. For use with stud mount license lights.
8100384
LP-15SB
Zinc
Zinc Plated Heavy Duty Steel License Plate Bracket. For use with stud mount license lights.
8100019
Gray
Molded all weather plastic adapter allows 2-1/2 sealed lights to be surface mounted. Requires grommet part number 8100249 for installation. Snap Ring for mounting 4 round lights. Snap-in bracket.
Molded bracket and plug surface mount kits. Single wire design grounds through mounting hardware. Includes bracket, plug and molded lead wire. Molded bracket and plug surface mount kits. Single wire design grounds through mounting hardware. Includes bracket, plug and molded lead wire. Molded bracket and plug surface mount kits. Single wire design grounds through mounting hardware. Includes bracket, plug and molded lead wire. Molded bracket and plug surface mount kits. Single wire design grounds through mounting hardware. Includes bracket, 180 male molded connector and molded lead wire. Molded all weather black plastic surface mount light bracket. Intended for single wire molded plug part number 8100001. Includes gasket for weather-tight seal. Molded all weather black plastic surface mount light bracket. Intended for single wire molded plug part number 8100001. Includes gasket for weather-tight seal. Molded all weather black plastic surface mount light bracket. Intended for two wire molded plug part numbers 8100383 (straight) or 8100404 (right angle). Includes gasket for weather-tight seal.
8100314
A-40SRB
Gray
8100015
A-65PB
Black
8100014
A-66PB
Gray
8100285
A-67CB
Chrome
8100031
A-65PBPG
Black
8100463
A-91BB
Black
8100018
A-91CB
Chrome
8100017
A-91OB
Chrome
Ref #
A-45CGB
Color
Chrome
Description
Chrome Cover Ring for 4 Grommets Mount Lights. Includes two screws for installation.
8100106
A-42FCB
Chrome
Chrome Cover Ring Flange for 4 Round Flange Mount Lights. Includes three screws for installation.
WWW.TEXTRAIL.COM
L-24
Ref #
A-13C2B
Color
Chrome
Description
Snap-on Chrome Ring for enhancing appearance of Mini Sealed LED Marker/ Clearance Lights. Features polished, chromeplated finish. Snap-on Chrome Ring for enhancing appearance of 6 Oval Sealed LED Lights.
8100451
A-78CB
Chrome
8100091
BK-42CB
Chrome
Chrome Bracket for Oblong Marker / Clearance Lights. Polished, chrome-plated finished steel guard for added protection of lights.
Ref #
A-54GB
Description
2 Open Back Flush Mount Black PVC Grommet. Requires industry standard 2-prong plug for electrical connection (8100383 or 8100404) and grounding screws. 2-5/16 mounting hole required. 2 Open Back Flush Mount Black PVC Grommet. Includes industry standard 2-prong straight plug (8100383) for electrical connection and grounding screws. 2-5/16 mounting hole required. 2-1/2 Open Back Flush Mount Black PVC Grommet. Requires industry standard 2-prong plug for electrical connection (8100383 or 8100404) and grounding screws. 3 mounting hole required. 2-1/2 Open Back Flush Mount Black PVC Grommet. Includes industry standard 2-prong straight plug (8100383) for electrical connection and grounding screws. 3 mounting hole required. 2-1/2 Open Back Recessed Mount Black PVC Grommet. Includes industry standard 2-prong straight plug (8100383) for electrical connection and grounding screws. 2-25/32 mounting hole required.
8100049
A-54GK
8100457
A-55GB
8100204
A-55GK
8100249
A-57GK
Part #
8100048
Ref #
J-573-GM
Description
Black PVC Grommet allows lights to be flush mounted. Provides shock mount to lengthen lamp life. Requires industry standard 2-prong plug (8100383 or 8100404) for electrical connection.
8100280
A-13G2B
8100523
A-33GB
Black PVC Grommet allows flush mounting of the ST/STL-33 & 34 Stop, Tail & Turn lights. Provides shock mount to lengthen bulb life.
L-25
WWW.TEXTRAIL.COM
Ref #
A-70GB
Description
Black PVC Grommet for 6 Oval Lights to be flush mounted. Provides shock mount to lengthen bulb life.
8100430
A-45GB
Black PVC Grommet for 4 Round Lights to be flush mounted in 4-1/2 cut-out. Provides shock mount to lengthen bulb life.
84000525
46
Description
8100383
A-46PB
Two-Prong Straight Molded Plug with 6 leads for sealed clearance/marker lights. Includes #10 ring terminal on ground wire; hot wire is bare.
8100404
A-49PB
Two-Prong Right Angle Molded Plug with 6 leads for sealed clearance/ marker lights. Includes #10 ring terminal on ground wire; hot wire is bare.
8100403
A-45CB
Two-Prong Straight Molded Plug with 6 leads for single contact sealed lights. Ideal for use with back-up lights. Includes #10 ring terminal on ground wire; hot wire is bare. Three-Prong Straight Molded Plug with 6 leads for double contact sealed lights. Ideal for use with stop/turn/tail lights. Includes #10 ring terminal on ground wire; hot wire is bare.
8100388
A-45PB
8100532
A-47PB
Three-Prong Right Angle Molded Plug with 6 leads for double contact sealed lights. Ideal for use with stop/turn/tail lights. Includes #10 ring terminal on ground wire; hot wire is bare.
WWW.TEXTRAIL.COM
L-26
BLUE
Electric Brakes
PURPLE
Back-Up Lights
Trailer Side
Trailer Side
NOTE: ILLUSTRATIONS REPRESENT A REAR VIEW OF CONNECTORS. NOTE: IDENTIFY THE WIRES ON YOUR VEHICLE AND TRAILER BY FUNCTION ONLY. COLOR IS NOT STANDARD AMONG ALL MANUFACTURERS. THIS DIAGRAM IS INTENDED AS GUIDANCE ONLY.
WWW.TEXTRAIL.COM
L-27
7000324
7000304
7000303-02
7000304-02
7000303
7000084
7000088
7000087
7000156
7000175
7000174
7000344
9900137
9900076
9900078
Flat Electrical Connectors Description 4-Flat Molded Plug - Trailer Side 48" Long 4-Flat Molded Socket - Vehicle Side 48" Long 4-Flat Molded Plug - Trailer Side 12" Long 4-Flat Molded Plug & Socket 12" Lead 4-Flat Molded Extension 48" 5-Flat Molded Plug - Trailer Side 12" Long 5-Flat Molded Socket - Vehicle Side 48" Long 5-Flat Molded Socket - Vehicle Side 60" Long
Wiring Harness Description 4-Flat Molded Wishbone Harness 15' 4-Flat Molded Wishbone Harness 18' 4-Flat Molded Wishbone Harness 20' 4-Flat Molded Wishbone Harness 25' 4-Flat Molded Wishbone Harness 30' 4-Flat Molded Wishbone Harness 35' 4-Flat Molded Wishbone Harness 40'
L-28
9900077
9900090
7000330
7000309
7000310
7000077
9900064
9900071
WWW.TEXTRAIL.COM
Ref #
37565
Description
Adapter, 7 to 6 & 4 Center pin auxiliary. Adapts a 7-RV blade to both a 6-round and a 4-wire flat. Universal - Center pin can be switched to auxiliary or electric brake. Adapter, 7 to 6 Center pin auxiliary. Adapts a 7-RV blade to 6-round. Universal - Center pin can be switched to electric brake. Includes dust cover. Adapter, 7-RV blade to 4 wire flat with dust cover.
7000046 7000041 7000051 7000045
7000045
37545
7000041
37355
7000046
18142
Adapter, 6-round to 4 wire flat with dust cover. Adapter, 4 wire flat to 7-RV blade. Adapter, 4 wire flat to both a 4 wire flat and a 7 RV blade. Weatherproof. Adapter, 4 wire flat to 6-round pin connector.
7000035 7000037
7000038
7000043
7000037
47165
Ref #
40965
Description
Trailer connector. Replaces factory 7-way socket with a 4 wire flat and 6 round. Weatherproof. Fits the vehicles listed below: Trailer connector. Replaces factory 7-way socket with a 4 wire flat and 7 RV blade. Weatherproof. Fits the vehicles listed below:
7000048
7000049
40955
Chevy / GMC / Olds / Cadillac / Hummer / Buick / Isuzu Pickups, Tahoe, Suburban, Yukon / XL / Denali Ford / Lincoln / Mercury / Nissan / Saab F-Series, Expedition, Excursion, Navigator Explorer, Mountaineer Aviator Armada, Titan QX-56 Q7 9-7X Mark LT 1999-2009 2002-2009 2003-2006 2004-2009 2004-2009 2007-2009 2005-2006 2006-2008 Avalanche, Trailblazer, Envoy Bravada Escalade / EXT H2 / H2 SUT H3 Rainier Ascender Dodge / Chrysler Durango Ram 1500 Pickups Aspen 2007-2009 2009 2007-2009 2000-2009 2002-2009 2002-2004 2001-2009 2003-2009 2006-2009 2004-2007 2004-2008
WWW.TEXTRAIL.COM
L-29
Part# 7000335
Ref # 42145
Description Trailer connector. Replaces factory 7-way socket with a 4 wire flat and 7 blade RV round. Weatherproof. Fits the vehicles listed here:
Early 2007 2003-2008 2000-2008 2000-2009 2000-2009 2000-Early07 2006-2009 2000-2009 2005-2007 2004-2009 2002-2008 2006-2008
Mitsubishi Raider
Ref #
I-23
Description
Heavy-Duty Steel Zinc Bracket for mounting vehicle end of trailer electrical connector to the vehicle. Bracket for vehicle end steel or plastic 7 or 9 pole connectors. Durable Plastic Bracket for mounting 4 wire flat plug. Bracket for mounting vehicle end of trailer electrical connector to the vehicle. Bracket for vehicle end steel or plastic 4, 5, or 6 way round connectors. Heavy-Duty Steel Zinc Bracket for mounting vehicle end of trailer electrical connector to the vehicle. Bracket for vehicle end steel or plastic 4 or 6 way round connectors.
7000063
48595
7000325
38605
7000054
I-21
ELECTRICAL ACCESSORIES
Quick Splices
Part# 7000076 7000075 7000804 7000219 7000044 7000286 Ref # QSNSNG QSSNG 804 QSNS QSSSG QSS Description Quick Splice Strip 18-14 AWG White Without Stop Non-Gel Quick Splice With Stop Blue 18-14 AWG. Blue Non-Gel 3M Quick Splice 804 Scotchlok 18-16 AWG Auto-Elec with Gel Blue With Stop Quick Splice Without Stop 18-14 AWG Quick Splice Self-Strip 22-14 AWG with Silicone Gel Quick Splice With Stop Yellow 12-10 AWG
7000076
7000075
7000804
700044
Terminal Connectors
Part# 7000267 7000271 7000033 7000274 Ref # TR14 TR516 TR38 TR10 Description Vinyl Funnel Terminal Ring 1/4" Eye 16-14 Gauge Blue Vinyl Funnel Terminal Ring 5/16" Eye 16-14 Gauge Blue Vinyl Funnel Terminal Ring 3/8" Eye 16-14 Gauge Blue Vinyl Funnel Terminal Ring #10 Eye 16-14 Gauge Blue
L-30 Terminal Connectors also available insulated with nylon
WWW.TEXTRAIL.COM
Cable Ties Part# 7000287 7000071 7000311 7000068 7000069 7000028 7000027 Ref # CT75 CT85 CT15B CT15N CT21N CTMB CTMN Description Cable Tie 50 Tensile Black 7-1/2" Overall Length Cable Tie 40 Tensile Natural 8-1/2" Overall Length Cable Tie 120 Tensile Black 15" Overall Length Cable Tie 120 Tensile Natural 15" Overall Length Cable Tie 120 Tensile Natural 21" Overall Length Cable Tie 1" 4-Way #10 screw hole / Adhesive Square Mount Black Cable Tie 1" 4-Way #10 screw hole / Adhesive Square Mount Natural Circuit Breakers Part# 6500056 6500003 6500028 6500029 6500047 6500048 Ref # CBMB5 CBMB15 CBMB20 CBMB30 CBMB40 CBMB50 Description Circuit Breaker 5AMP with Mounting Bracket Circuit Breaker 15AMP with Mounting Bracket Circuit Breaker 20AMP with Mounting Bracket Circuit Breaker 30AMP with Mounting Bracket Circuit Breaker 40AMP with Mounting Bracket Circuit Breaker 50AMP with Mounting Bracket
L-31 7000287
WWW.TEXTRAIL.COM
Toggle Switch 6-24 Volt 2-Terminals On-Off 50-Amp 1" Handle Screw Term Type Sngl Pole/Sngl Throw 44" 7000426 TS62444 Wires 7000151 7000464 TSR122 TSRP Toggle Switch Mounted in Recessed Plate 12-Volt 2-Position 20-Amp 11/16" Handle Screw Term Type Dbl Pole/Dbl Throw Aluminum Recessed Plate for Toggle Switch
7000151
7000464
Brass Push-Pull Switch Part# 7000152 Ref # PPS Description Push-Pull 15A/25A On-Off 1-1/4" x 3/8" Stem Sngl Pole / Sngl Throw Wire Nuts Part# 7000022 7000021 Ref # WNY WNO Description Hard Wire Nut Min(2) 18 Gauge Max (3) 16 Gauge Yellow Hard Wire Nut Min(2) 18 Gauge Max (3) 10 Gauge Orange Terminal Kits Part# 7000053 7000052 7000014 7000015 Ref # TK360N TK360 TK430N TK430 Description Terminal Kit Nylon 360 Piece with Storage Box - No Pliers Terminal Kit Insulated 360 Piece with Storage Box - No Pliers Terminal Kit Nylon 430 Piece with Steel Storage Box & Pliers Terminal Kit Nylon 430 Piece with Steel Storage Box & Pliers Electrical Tape Part# 7000265 Ref # PT60 Description Black Electrical Tape 3/4" x 60' Flashers Part# 7000098 7000150 7000107 Ref # 7098 1206 7107 Description Flasher Elec 2-Blade 12V XHD Flasher Elec-Mech 2-Term 12V Flasher Elec 2-Blade 12V XHD Circuit Testers Part# 7000364 7000275 Ref # 8901 6392 Description 6-Volt & 12-Volt System Circuit Tester 12-Volt System Grabber Circuit Tester WWW.TEXTRAIL.COM
L-32 7000364 7000275 7000265 7000015 7000022 7000021
7000305
7000306
50928
7000306
7000160
7000161
9900004
7000133
7000134
WWW.TEXTRAIL.COM
Ref # 194
168
Bulb Type
Wedge Wedge S.C. Bayonet S.C. Bayonet S.C. Bayonet S.C. Bayonet S.C. Bayonet S.C. Bayonet S.C. Bayonet Mini Bayonet Mini Bayonet Mini Bayonet Mini Bayonet Mini Bayonet Mini Bayonet Mini Bayonet
Candle Power
2 2 32 32 32 15 21 15 15 2 2 6 4 2 4 1
Life Hours
2500 500 1200 1200 200 100 1000 1000 100 7500 2000 750 5000 500 5000 1000
Service Description
Heavy Duty Clearance/Marker Clearance/Marker/Instrument Back-up/Clearance Stop/Park/Tail/Signal Back-up Dome/RV Interior Dome/RV Back-up Porch Dome/RV Interior Instrument Indicator Instrument Interior Heavy Duty License Clearance/Marker/Instrument License Auto Instrument
1156
1157 1073 1003 1141 93 TL1004 1893 1895 89 97 57 67 471
The voltage at which the lamp is designed for rated amperes, candle power and life characteristics. The average value of total light output of miniature lamps at design volts. The rated average life to be expected when operating at design volts. Actual service can vary. The major applications are listed. In most cases, bulbs can serve other applications.
Part #
9900083 9900085 9900084 9900088 9900081 9900087 9900082 9900022 9900023 9900024 9900025 9900026 9900027 9900028
Ref #
00483 00481 00484 00479 00482 00480 00478 02410 02414 02413 02411 02408 02409 02412
Description
Primary Wire 14-Gauge Single Strand Black Primary Wire 14-Gauge Single Strand Blue Primary Wire 14-Gauge Single Strand Brown Primary Wire 14-Gauge Single Strand Green Primary Wire 14-Gauge Single Strand Red Primary Wire 14-Gauge Single Strand White Primary Wire 14-Gauge Single Strand Yellow Primary Wire 14-Gauge Single Strand Black Primary Wire 14-Gauge Single Strand Blue Primary Wire 14-Gauge Single Strand Brown Primary Wire 14-Gauge Single Strand Green Primary Wire 14-Gauge Single Strand Red Primary Wire 14-Gauge Single Strand White Primary Wire 14-Gauge Single Strand Yellow
WWW.TEXTRAIL.COM
L-35
Stranded annealed, single conductor copper wire with general purpose thermoplastic (GPT) insulation. Meets SAE J1128 specifications and is RoHS compliant. Temperature rating of 176 degrees Fahrenheit (80 degrees Celsius). 14 Gauge Stranding 19/27 Nominal OD 0.117 Available in 20, 100, 500 and 1000 spools.
14-Gauge Single Strand Primary Wire (Continued) Ref # Description Wire Length on Spool
02424 02428 02427 02425 02422 02423 02426 02438 02442 02436 02437 Primary Wire 14-Gauge Single Strand Black Primary Wire 14-Gauge Single Strand Blue Primary Wire 14-Gauge Single Strand Brown Primary Wire 14-Gauge Single Strand Green Primary Wire 14-Gauge Single Strand Red Primary Wire 14-Gauge Single Strand White Primary Wire 14-Gauge Single Strand Yellow Primary Wire 14-Gauge Single Strand Black Primary Wire 14-Gauge Single Strand Blue Primary Wire 14-Gauge Single Strand Red Primary Wire 14-Gauge Single Strand White 500 500 500 500 500 500 500 1000 1000 1000 1000
Part#
9900092 9900098 9900095 9900093 9900089 9900091 9900094 9900099 9900128 9900132 9900131 9900129 9900126 9900127 9900130 9900133
Ref #
02360 02364 02363 02361 02358 02359 02362 02365 02374 02378 02377 02375 02372 02373 02376 02379
Stranded annealed, single conductor copper wire with general purpose thermoplastic (GPT) insulation. Meets SAE J1128 specifications and is RoHS compliant. Temperature rating of 176 degrees Fahrenheit (80 degrees Celsius). 16 Gauge Stranding 19/29 Nominal OD 0.102 Available in 100 and 500 spools.
Part#
9900118 9900051 9900117 9900115 9900116
Ref #
02308 02309 02311 02312 02313
Stranded annealed, single conductor copper wire with general purpose thermoplastic (GPT) insulation. Meets SAE J1128 specifications and is RoHS compliant. Temperature rating of 176 degrees Fahrenheit (80 degrees Celsius). 18 Gauge Stranding 16/30 Nominal OD 0.095 Available in 100 spools.
WWW.TEXTRAIL.COM
L-36
Ref #
03208
PVC Insulated, meets SAE J1128 specifications and is RoHS compliant. Nominal cold temperature rating of -7.6 degrees Fahrenheit (-22 degrees Celsius). Temperature rating of 176 degrees Fahrenheit (80 degrees Celsius). Available in 100 and 500 spools.
Part #
9900097
Ref #
04914 04905 04922 04926
Description
Trailer Cable Wire 12/6-10/1 Gauge Stranding 19/25-19/23 Nominal OD 0.600 Yellow/Brown/Red/Black/Blue/Green/White with Black Jacket. Trailer Cable Wire 14/4 Gauge Stranding 19/27 Nominal OD 0.410 Black/Red/Brown and White Rotation. Trailer Cable Wire 16/6 Gauge Stranding 19/29 Nominal OD 0.425 Green/Blue/Yellow/Black/Red and Brown Rotation. Trailer Cable Wire 14/6 Gauge Stranding 19/27 Nominal OD 0.500 Red/Blue/Green/ Yellow/Brown and Black Rotation.
9900038 9900003
9900045
Part #
9900010 9900021 9900120 9900050 9900020
Ref #
02925 98634 02921 02922 99945
Description
Bonded Parallel Wire 18/4 Gauge Stranding 16/30 Nominal OD 0.095 x 0.380 White/ Brown/Yellow and Green Wires. Bonded Parallel Wire 18/4 Gauge Stranding 16/30 Nominal OD 0.095 x 0.380 White/ Brown/Yellow and Green Wires. Bonded Parallel Wire 18/3 Gauge Stranding 16/30 Nominal OD 0.095 x 0.285 Brown/ Yellow and Green Wires. Bonded Parallel Wire 18/3 Gauge Stranding 16/30 Nominal OD 0.095 x 0.285 Brown/ Yellow and Green Wires. Bonded Parallel Wire 18/3 Gauge Stranding 16/30 Nominal OD 0.095 x 0.285 Brown/ Yellow and Green Wires. Bonded Parallel Wire 16/4 Gauge Stranding 19/29 Nominal OD 0.102 x 0.408 White/ Brown/Yellow and Green Wires. Bonded Parallel Wire 16/4 Gauge Stranding 19/29 Nominal OD 0.102 x 0.408 White/ Brown/Yellow and Green Wires. Bonded Parallel Wire 16/3 Gauge Stranding 19/29 Nominal OD 0.102 x 0.306 Brown/ Yellow and Green Wires. Bonded Parallel Wire 16/3 Gauge Stranding 19/29 Nominal OD 0.102 x 0.306 Brown/ Yellow and Green Wires. Bonded Parallel Wire 16/3 Gauge Stranding 19/29 Nominal OD 0.102 x 0.306 Brown/ Yellow and Green Wires.
WWW.TEXTRAIL.COM
L-37
Ref #
KCT6R6W KCT11R7W CT6R6W KCT6R6WA KCT12W CTS12W CTS18RW
Description
Reflective Conspicuity Tape. Adhesive backed tape is kiss cut at 12-inches. 6-inches of Red and 6-inches of White. 2-inches wide. 3M Reflective Conspicuity Tape. Adhesive backed tape kiss cut at 18-inch strips. Strips are 11-inches of Red and 7-inches of White. 2-inches wide. Sold by foot. Reflective Conspicuity Tape. Adhesive backed tape is 6-inches of Red and 6-inches of White. 2-inches wide. Reflective Conspicuity Tape. Adhesive backed tape is kiss cut at 12-inch strips. 6-inches of Red and 6-inches of White. 2-inches wide. Avery Dennison Reflective Conspicuity Tape. Adhesive backed tape is kiss cut at 12-inches. 2-inch wide White tape. Reflective Conspicuity Tape. Adhesive backed White 12 strips. 2-inches wide. Reflective Conspicuity Tape. Adhesive backed tape in 18-inch strips. Strips are 11-inches of Red and 7-inches of White and are 2-inches wide. 150 Roll 150 Roll 150 Roll 150 Roll 150 Roll 12 Strips 18 Strips 8100303 8100300 8100307 8100306 8100299 8100456
8100301
Oblong Acrylic Reflector for surface mount. Mounts with adhesive back or with screws on 3-15/16 centers. Amber. Oblong Acrylic Reflector for surface mount. Mounts with adhesive back or with screws on 3-15/16 centers. Red. 3-3/16 Round Reflector for surface mount on a single screw. Amber. 3-3/16 Round Reflector for surface mount on a single screw. Red. 3-3/16 Round Acrylic Reflector for surface mount. Self-adhesive Amber. 3-3/16 Round Acrylic Reflector for surface mount. Self-adhesive Red. 3 Armored Reflector. Housed in rust-proof aluminum housing that mounts with screws. 8100206 8100207 8100225
8100160 8100224
8100222 8100223
Part# 8100481 8100063 8100151 8100156 8100130 8100122 8100128 8100154 8100140 8100141 8100167 8100168 8100100 8100101 8100164 8100074 8100425 8100401 8100121 8100123 8100127 8100126 8100082 8100227
Ref # AL-8RB A-2RB A-8RB A-9RB A-16RB A-24RB A-40RB A-43RB A-11AB A-11RB A-38AB A-38RB A-42AB A-42RB A-58AB A-58RB A-68AB A-68RB A-71AB A-71RB A-81AB A-81RB A-82AB A-82RB
Lenses Description LED Tail Light Red Lens for 8100365, 8100366, 8100368, and 8100369 LED lights. LED Side Marker Red Lens for 8100365 and 8100366 LED lights. Tail Light Red Lens for 8100389, 8100390, 8100170 and 8100191 lights. Side Marker Red Lens for 8100477 and 8100478 lights. Lens Set: Red Tail and Side Marker Lens for 8100196 and 8100197 lights. Red Lens for 8100520 and 8100509 lights. Red Lens for 8100187 lights. Safety Triangle Reflector Kit Red Reflector Optics Lens for 8100187 lights. Part# Ref # Description Amber Lens for 8100139 lights. Triangle Safety Reflector Kit. Includes three safety 8850045 TRI Red Lens for 8100138 lights. warning reflector triangles with a plastic storage box Amber Lens for 8100497 lights. Red Lens for 8100498 lights. Amber Lens for 8100499 lights. Red Lens for 8100500 lights. Amber Lens for 8100102 lights. Red Lens for 8100103 lights. Safety Flares Amber Lens for 8100432 lights. Part# Ref # Description Red Lens for 8100433 lights. 8850013 FLARE Safety Flare. Burns for 20-minutes Amber Lens for 8100034 lights. Red Lens for 8100033 lights. Amber Lens for 8100098 lights. Red Lens for 8100099 lights. Amber Lens for 8100081 lights. Red Lens for 8100153 lights.
WWW.TEXTRAIL.COM
L-38
T E X T R A I L PA C K A G E P R O D U C T S
ELECTRICAL
PART # DESCRIPTION 7000038-01 ADAPTER 6-WAY ROUND TO 4-WAY FLAT 7000041-01 ADAPTER 7-WAY RV TO 4-WAY FLAT 7000045-01 ADAPTER 7-WAY RV TO 6-WAY ROUND 7000051-01 ADAPTER 7-WAY RV TO 6-WAY ROUND & 4-WAY FLAT 7000313-01 ADAPTER 6-WAY ROUND TO 7-WAY RV (flexible) 6500039-01 BRAKE HARNESS-GM 99-07 6500049-01 BRAKE HARNESS-FORD 05-08 SUPER DUTY 8100118-01 LIGHT KIT COMPLETE W/Stop-Turn-Tail-Clearance 6500002-01 BRK CONTROL ENGAGE HAYES 1-3 AXLE DIGITAL TIMED 6500009-01 BRK CONTROL ENERGIZE III 1-2 AXLE PROPORTIONAL 6500011-01 BRK CONTROL SYNCHRONIZER HAYES 1-2 AXLE TIMED DELAY 6450172-01 MAGNET 10"x 1.5" 2.8K OVAL, DEXTER 6450165-01 MAGNET 10"x 2.25" 3.5K OVAL, DEXTER 6450159-01 MAGNET 12"x 2" ROUND, PRE-1988 HAYES 6450158-01 MAGNET 10"x 2.25" OVAL, HAYES-DEXTER 6450166-01 MAGNET 12"x 2" 5.2-6K OVAL, DEXTER 6450174-01 MAGNET 12.25"x 3.375" & 4" DEXTER 6450169-01 MAGNET 12.25"x 5" 12K OVAL, DEXTER 6450157-01 MAGNET 10"x 2.25" ROUND HAYES PKG RED WIRES (PRE-1988) 6450160-01 MAGNET 12.25"x 2.5" 7.2K OVAL, DEXTER RED WIRE 6450161-01 MAGNET 12"x 2" 7K OVAL, DEXTER BLK WIRE 6450162-01 MAGNET VENT 12"x 3.25" & 12.25"x 3.5" 8-12K HAYES 6450168-01 MAGNET 12.25"x3.5" 10K WARNER 6450170-01 MAGNET 7" x 1.25" 2K ROUND, DEXTER POST-04/1990 6450171-01 MAGNET 7" x 1.25" 2K ROUND DX PRE 4-90 YW WIRES TEXTRAIL 6450173-01 MAGNET 12.25"x 3.375" 7.2-8K OVAL DEXTER WHITE WIRE 6450183-01 MAGNET 12.25"x 5" 15K OVAL DEXTER BLUE WIRE
PART # 7350209-01 7350315-01 8200150-01 8200221-01 8200176-01 8200177-01 8200220-01 6300082-01 6300079-01 6300031-01 DESCRIPTION RECEIVER HITCH PIN 1/2" x 2-5/8" W/KEEPER RECEIVER HITCH PIN 5/8" x 3" W/KEEPER RECEIVER LOCK FITS 2"REC 5/8"PIN W/ KEYS RECEIVER LOCK FITS 2"REC 5/8"PIN W/ KEYS (T3/DB-3)) RECEIVER LOCK SET 5/8"-7/8"SPAN COUPLER KEY'D ALIKE (TM31) RECEIVER LOCK SET RECEIVER 5/8" 2-1/2" KEY'D ALIKE (TM32) LOCKING LUG NUT W/ KEY 1/2"NUT 3/4"SOCKET HITCH BALL 2" X 1" X 2-1/4"SHANK 6K CHROME HITCH BALL 2-5/16" X 1" X 2-1/4"SHANK 7.5K CHROME HITCH BALL 2-5/16" X 1-1/4"" X 2-1/4"SHANK 10K CHROME
TOWING
WWW.TEXTRAIL.COM
T E X T R A I L PA C K A G E P R O D U C T S
RUNNING GEAR
PART # 7800037-01 7800038-01 7800059-01 7800070-01 7800071-01 7700025-01 7700027-01 7700016-01 7700186-01 7700018-01 7700029-01 7700030-01 7700008-01 7700120-01 9000030-01 9000031-01 7700107-01 7700109-01 7700045-01 7700036-01 7700048-01 7700058-01 9000163-01 9000223-01 9000164-01 9000039-01 9000054-01 9000038-01 8750100-01 8750102-01 8750103-01 8750101-01 9000244-01 9000225-01 9000239-01 9000245-01 9000242-01 9100052-01 9100048-01 9100045-01 9100047-01 9100013-01 9100014-01 9100015-01 DESCRIPTION BEARING KIT 1" BT8 SPINDLE L44643 BEARING (1 Wheel) BEARING KIT 1.125" BT16 SPINDLE (1 Wheel) BEARING KIT #84 SPINDLE (1 Wheel) BEARING KIT #42 15123/25580 BEARINGS (1 Wheel) BEARING KIT #42 14125A/25580 BEARINGS (1 Wheel) GREASE CAP 1.99"OD EZ-LUBE W/PLUG (Qty.2) GREASE CAP 2.45"OD DRIVE-IN (Qty.2) GREASE CAP 2.45"OD EZ-LUBE W/PLUG, 5.2-6K (Qty.2) GREASE CAP 2.72"OD DRIVE-IN (Qty.2) GREASE CAP 2.72" EZ-LUBE W/PLUG, 5.2-8K (Qty.2) OIL CAP KIT W/O-RING & PLUG 6-8K&9K(PRE-10/89) DEXTER OIL CAP KIT W/O-RING & CAP 9K(POST-10/89)-15K DEXTER WHEEL BOLT 60 DEG 1/2"-20 x 0.88 (Qty.4) WHEEL BOLT 90 DEG 9/16"-18 x1.12 (Qty.4) SHACKLE BOLT & NUT KIT 9/16"-18 X 3" (Qty.4) SHACKLE BOLT & NUT KIT 9/16"-18 X 3-1/2" (Qty.4) PRESS-IN STUD 5/8" X 3.16" 9-12K (Qty.4) PRESS-IN STUD 1/2" X 1.84" 3.5-7K (Qty.4) WHEEL NUT CONE 60 DEG 1/2"-20 (Qty.6) WHEEL NUT CONE 60 DEG 9/16"-18 (Qty.4) WHEEL NUT CONE 90 DEG 5/8"-18 (Qty.4) RIM CLAMP MOBILE HOME & UTILITY 14.5" RIMS (Qty.5) SHACKLE STRAP KIT 2-1/4" HOLE CTR 1-1/4"W X 3-1/2"L (Qty.4) SHACKLE STRAP KIT 2-5/8" HOLE CTR 1-1/4"W X 4"L (Qty.4) SHACKLE STRAP KIT 3 1/8" HOLE CTR 1-1/4"W X 4-1/2" (Qty.4) NYLON BUSHING KIT 9/16" ID X 11/16"OD X 2"L (Qty.8) NYLON BUSHING KIT 9/16"ID X 3/4"OD X 1-3/4"L (Qty.6) NYLON BUSHING KIT 9/16"ID x 11/16"OD X 1-3/4"L (Qty.8) SPINDLE NUT 1"-14 TONGUE WASHER, NUT, COTTER PIN (Qty.2) SPINDLE NUT 1"-14 D-WASHER, NUT & COTTER PIN (Qty.2) SPINDLE NUT 1"-14 TANG WASHER, NUT & COTTER PIN (Qty.2) SPINDLE NUT 1"-14 PLAIN WASHER, NUT & COTTER PIN (Qty.2) U-BOLT PKG ROUND 1/2"DIA X 2-3/8"W X 5.5"L, 3.5K (Qty.2) U-BOLT PKG ROUND 1/2"DIA x 3" W x 7"L, 5.2-6K (Qty.2) U-BOLT PKG SQUARE 9/16"DIA X 1-3/4W X 5"L, 2K (Qty.2) U-BOLT PKG ROUND 9/16" DIA X 3"W X 7.5"L, 5.2-6K (Qty.2) U-BOLT PKG SQUARE 9/16"DIA X 2"W X 5-1/2"L, 2-3.5K (Qty. 2) U-BOLT KIT ROUND 3/8"DIA X 1-3/4"W x 4"L, 2K (APUBR10) U-BOLT KIT ROUND 9/16"DIA X 3"W X 7.5"L, 5.2-6K (APUBR9) U-BOLT KIT ROUND 1/2"DIA X 2-3/8"W X 5-1/2"L, 3.5K (APUBR1) U-BOLT KIT ROUND 1/2"DIA X 3"W X 7"L, 5.2-6K (APUBR2) HANGER KIT SNGL AXLE 1.75"DIA DBL-EYE SPG 2-7K (APS1-TT) HANGER KIT TNDM AXLE 1.75"DIA DBL-EYE SPG 2-7K (APT3) HANGER KIT TNDM AXLE 1.75"DIA DBL-EYE SPG 2-7K (APT5)
WWW.TEXTRAIL.COM 2010 Copyright by TexTrail, Inc.
INDEX
2,000 lb - 7,000 lb 1.75" Double Eye Springs 2,000 lb - 7,000 lb 1.75" Double Eye Springs 2,000 lb - 7,000 lb 1.75" Double Eye Springs 2,000 lb - 8,000 lb 1.75" & 2" Slipper Springs 2,000 lb Brakes 2,000 lb Disc Brakes 2,000 lb Hub Group 2,000 lb TORFLEX / D20 Leaf Spring Axle 3,500 lb - 8,000 lb 2" Slipper Springs 3,500 lb - 8,000 lb 2" Slipper Springs 3,500 lb - 8,000 lb 2" Slipper Springs 3,500 lb - 8,000 lb 2" Slipper Springs 3,500 lb Brakes 3,500 lb Disc 3,500 lb Electric Brakes 3,500 lb Hub Group 3,500 lb TORFLEX / D35 Leaf Spring Axle 4,400 lb Brakes 4,400 lb D44 Leaf Spring Axle 4,400 lb Hub Group 6,000 lb Brakes 6,000 lb D60 Leaf Spring Axle 6,000 lb Disc Brakes 6,000 lb Electric Brakes 6,000 lb Hub Group 6,000 lb Suspension 6,000 lb TORFLEX 7,000 lb Brakes 7,000 lb D70 Leaf Spring Axle 7,000 lb Disc Brakes 7,000 lb Electric Brakes 7,000 lb Hub Group 7,000 lb Suspension 7,000 lb TORFLEX 7,200 lb Brakes 7,200 lb D72 Leaf Spring Axle 7,200 lb Disc Brakes 7,200 lb Hub Group 7,200 lb Suspension 7,200 lb TORFLEX 8,000 lb Brakes 8,000 lb D80 Leaf Spring Axle 8,000 lb Disc Brakes 8,000 lb Electric Brakes 8,000 lb Hub Group 8,000 lb Suspension 8,000 lb TORFLEX 9,000 lb 2" Slipper Springs 9,000 lb 2" Slipper Springs 9,000 lb Brakes 9,000 lb D90 Leaf Spring Axle 9,000 lb Disc Brakes 9,000 lb Hub Group 9,000 lb Suspension 10,000 lb General Duty 2-1/2" Slipper Spring 7/8" Eye 10,000 lb General Duty 2-1/2" Slipper Springs 3/4" Eye (Dry) 10,000 lb General Duty 2-1/2" Slipper Springs 3/4" Eye (Wet) 10,000 lb General Duty 2-1/2" Slipper Springs 7/8" Eye 10,000 lb General Duty Brakes 10,000 lb General Duty D100GD Leaf Spring Axle 10,000 lb General Duty Disc Brakes 10,000 lb General Duty Hub Group 10,000 lb General Duty Suspension B-2 B-4 B-8 B-3 A-13 A-14 A-12 A-0 B-6 B-7 B-9 B-6 A-20 A-26 A-20 A-18 A-16 A-30 A-28 A-29 A-44 A-31 A-51 A-44 A-37 A-36 A-33 A-44 A-32 A-53 A-44 A-39 A-36 A-34 A-55 A-32 A-56 A-41 A-36 A-35 A-58 A-32 A-63 A-58 A-42 A-36 A-35 B-11 B-11 A-72 A-66 A-71 A-69 A-66 B-13 B-15 B-14 B-13 A-72 A-66 A-71 A-69 A-66 10,000 lb General Duty TORFLEX 10,000 lb Heavy Duty - 15,000 lb 3" Slipper Springs 10,000 lb Heavy Duty Brakes 10,000 lb Heavy Duty D100HD Leaf Spring Axle 10,000 lb Heavy Duty Hub Group 10,000 lb Heavy Duty Suspension 10,000 lb Heavy Duty TORFLEX 12,000 lb Brakes 12,000 lb D120 Leaf Spring Axle. 12,000 lb Hub Group 15,000 lb Brakes 15,000 lb D150 Leaf Spring Axle 15,000 lb Hub Group 22,500 lb -25,000 lb Brakes 22,500 lb -25,000 lb D200 Leaf Spring Axle 22,500 lb -25,000 lb Hub Group ABS Trailer Kit Actuating Couplers Adapter for Receiver Tube Adapter Sleeves Adapters Adjustable Clevis Adjustable Clevis Adjustable Pintle Eye Adjustable Tongue Coupler Adjustable Tow Bar A-Frame Coupler A-Frame Jack Agricultural & Industrial Winches Agricultural Hubs and Components Air Conditioning Air Suspension System All Purpose Stain Remover Aluminum Ball Mounts Aluminum Box (Underbody, Tongue & Specialty) Aluminum Trim Axle Straps B&W Adjustable Receiver / Pintle Hitch B&W Gooseneck Hitches B&W RV 5th Wheel B&W Tow & Stow Receiver Hitches Back-Up Assist Camera Back-Up Assist Camera Back-Up Lights Ball Corners Ball Mounts Balls Bar Lock Assembly Batteries & Chargers Bearing Kits Bearing Protectors Bearings Bins Bolt-On Receiver Hitches Bolt-On Swivel Jack Box (Aluminum & Powder Coated Underbody & Tongue, Specialty) Bracket for Electrical Connectors Brackets (Channel & Adjustable) Brackets for Lighting Brake Cleaner Brake Control & Actuator Replacement Parts Brake Control & Actuators Brake Controllers A-66 B-16 A-72 A-67 A-70 A-67 A-66 A-72 A-67 A-70 A-72 A-67 A-70 A-81 A-76 A-76 K-14 K-6 E-4 E-4 L-28 D-4 E-6 D-4 D-4 E-9 D-3 D-8 D-15 A-85 H-7 B-29 G-5 E-6 H-17 H-7 thru H-8 F-5 E-6 E-12 E-12 E-5 E-7 J-12 L-20 H-5 E-4 E-7 J-5 K-2 A-90 A-94 A-89 F-6 E-2 D-11 H-17 L-30 E-6 L-23 G-3 K-8 K-6 K-3 thru K-5
WWW.TEXTRAIL.COM
INDEX
Brake Fluid Brake Mounting Flanges Brake Mounting Hardware Breakaway Kits Breakaway Switch & Pin Bulbs Bumper Receiver Hitches Bumpers Bushings Butt Hinge Butterfly Latch Cab Lock Handles Cab Slam Locks Cable Ties Cam Lock Assembly Cap Plugs Caps for Gate Ramp Assemblies Cargo Carrier Platforms Cargo Management System Catch / Pull Latch Ceiling Heat & Air Units Center Caps Center Caps Certificate / Permit Holder Chain Chains Chargers & Batteries Chemicals Chrome Edge Trim Chrome Wheel Nuts Cleaner Clearance & Side Marker Lights Clevis Combination Hanger Kits Combination Pintle Hitch Connectors Conspicuity Tape Continuous Hinges Convert-A-Ball Corner Protectors Coupler Hardware Kit Coupler Latch Repair Kit Cushioned Ball Mounts D20 Leaf Spring Axle D35 Leaf Spring Axle D44 Leaf Spring Axle D60 Leaf Spring Axle D70 Leaf Spring Axle D72 Leaf Spring Axle D80 Leaf Spring Axle D90 Leaf Spring Axle D100GD Leaf Spring Axle D100HD Leaf Spring Axle D120 Leaf Spring Axle. D150 Leaf Spring Axle D200 Leaf Spring Axle "D" Bumpers Dead Bolt Flush Latch Decorative Brackets Direct Weld Swivel Jacks Door Holdbacks Door Holders Double Ball Mount Double Eye Springs G-3 A-87 A-87 K-2 K-2 L-35 E-3 J-11 B-20 J-3 J-9 J-5 J-5 L-31 J-5 J-11 H-15 E-8 F-4 J-9 H-7 A-91 C-6 L-26 F-3 J-17 K-2 G-3 H-7 thru H-8 C-5 G-5 L-2, L-7 & L-13 D-3 B-7 E-7 L-28 L-38 J-3 E-5 F-5 D-3 D-6 E-5 A-10 A-16 A-28 A-31 A-32 A-32 A-32 A-66 A-66 A-67 A-67 A-67 A-76 H-12 J-4 L-24 & L-25 D-10 J-6 J-6 E-4 B-19 Double Eye Springs 2,000 lb - 7,000 lb 1.75" Draw Bar Drill Bits D-Rings Drop Hitches Dropleg Jack Dropleg Jack & Landing Gear Accessories Dump Tarp Kits Edge Guard Electric Fan Electric Winches Electrical Accessories Electro/Hydraulic Actuators Equalizers E-Track Extender for Receiver Tube EZ Jack Fenders Fifth Wheel Hitches Flashing & Revolving Lights Flat Mount Coupler Fleet Count Floor Screws Flush Latches Flush Mount Hinges Folding Gooseneck Hitch Balls Gas / Water Cooler Holder Gate Lift Assist Gear Oil Generators Gooseneck Channels Gooseneck Coupler Gooseneck Hitch Plates Gooseneck Hitches Grab Handles Gravel Guard Grease Grease & Oil Seals Grease Caps Grommets Gussets Hand Towels Handles (Cab Lock) Handles (Grab) Hangers Hardener Hasp Heating Units Heavy Duty Ball Mounts Heavy Duty Jack Heavy Duty Suspension System Heavy Duty Wheel Mounting Hardware Hinge Pin Hinges Hitch Balls Hitch Pins Holland Mini Fifth Wheel Hood Latch Hooks Hub Caps Hub Covers Hydraulic Hoist Systems Hydraulic Line Kit Hydraulic Line Kit (Flexible) B-2, B-4 & B-8 D-6 H-16 & J-11 F-2 & J-7 E-3 D-12 D-13 H-19 H-6 H-7 D-16 L-28 - L-34 K-9 B-25 F-3 E-4 D-12 H-2 thru H-4 E-10 L-22 D-5 L-2 H-10 J-4 J-3 E-11 F-6 H-14 G-3 H-8 E-9 D-5 E-9 E-11 F-1, J-2 &J-7 H-6 G-3 A-88 A-91 L-25 - L-26 H-6 G-5 J-5 F-2, J-2 & J-7 B-24 G-6 J-5 H-7 E-4 D-12 B-27 A-93 J-3 J-3 E-7 J-8 E-9 J-4 F-3 & J-8 C-5 C-6 H-19 K-10 K-12
WWW.TEXTRAIL.COM
Hydraulic Line Kit (Tandem Dual) Identification Light Bars Incandescent Lighting Interchangeable Hitch Balls Interior & Dome Lights Jack Foot and Caster Jack Repair Parts King Pins Landing Gear Landing Gear & Dropleg Jack Accessories Latches LED Light Kits LED Lighting LED Micro-Flex Lighting Lenses for All Lighting License Lights Light Plugs, Pigtails & Lead Wires Light Protectors & Brackets Linch Pins Links Links Liquid Storage Tanks Load Binder Load Locker Locking Lug Nuts Locks Lubricants Lug Wrench Marine Jack Marine U-Bolts Metal Surface Cleaner Micro-Flex LED Lighting Motorcycle Wheel Chock Mounting Accessories Mounting Rails (5th Wheels) Mounting Rails (Folding Ball) Mud Flaps Nose Bows Nose Caps Nose Plate Oil Caps Packaged U-Bolts Paddle Latches Penetrating Oil Pin Stripers Pins (Hitch, Linch & Snapper) Pintle Hooks Pintle Mounts Pipe Bows Pipe Mount Swivel Jack Powder Coated Box (Underbody, Tongue & Specialty) Power Jack Primer Quick Links Quick Splices Races Rack Post & Gearbox RACK-EM Double Barrel Gate Lift Assist RACK'EM Racks Ramp Gate Assemblies Ramp Springs Ramps Rapid Hitch Ball Mounts
INDEX
K-13 Ratchet L-2, L-9 & L-17 L-13 E-5 L-22 D-14 D-9 D-5, E-9 & J-11 D-13 D-13 J-4 & J-9 L-13 L-2 & L-7 L-2 L-38 L-13 & L-20 L-26 H-7 J-9 F-3 J-8 H-18 F-3 F-4 C-5 J-12 G-3 C-5 D-7 B-23 G-5 L-2 F-6 L-23 & L-24 E-11 E-10 H-12 H-5 H-5 D-6 A-91 B-23 J-4 G-3 G-2 J-8 & J-9 E-7 E-6 H-6 D-9 H-17 D-11 G-6 F-3 & J-8 L-30 A-89 D-14 H-17 F-6 F-6 H-15 H-16 H-14 E-6 Ratchet Straps Receiver Accessories Receiver Ball Mounts Receiver Hitch Pins Receiver Locks Receiver Locks Receiver Tube Cover Receiver Tubes Reducer Reflective Tape Reflectors Respirators & Scotch Brite Retaining Ring Swivel Jack Retaining Rings Rim Clamps Rings Rivets & Rivet Tools Rivets & Rivet Tools Rockshield Roof Bows (Round Pipe) Roof Bows (Square Tube) Roof Caps Rope Rings Round Tube Swivel Jack Round U-Bolts Rubber Bumpers Rubber Mats Rubber Straps Rumber Products RV 5th Wheels RV Generators RV Towing Hitch Safety Chains Scissor Jack Sealants Self Tapping Torx Head Floor Screws Shackle Straps Simulators Single Axle Fenders & Fender Backs Single Axle Hanger Kits Single Speed Winches Slam Locks Slats Slipper Spring 7/8" Eye 10,000 lb General Duty 2-1/2" Slipper Springs Slipper Springs Slipper Springs 10,000 lb Heavy Duty - 15,000 lb 3" Slipper Springs 2,000 lb - 8,000 lb 1.75" & 2" Slipper Springs 3,500 lb - 8,000 lb 2" Slipper Springs 3/4" Eye (Dry) 10,000 lb General Duty 2-1/2" Slipper Springs 3/4" Eye (Wet) 10,000 lb General Duty 2-1/2" Slipper Springs 7/8" Eye 10,000 lb General Duty 2-1/2" Slipper Springs 9,000 lb 2" Smooth Shank Hitch Balls Snap Ring Swivel Jack Snapper Pins Spare Tire Carrier / Mount Specialty Ball Mounts Specialty Box Specialty Lighting Spindle Parts (Washers, Nuts & Cotter Pins) Spindles Spring and U-Bolt Kits
F-5 F-5 E-5 thru E-7 E-4 J-8 E-7 J-12 E-6 E-3 & E-8 G-6 L-38 L-38 G-2 D-11 A-94 A-94 F-2 & J-7 H-10 & J-10 H-10 & J-10 H-6 H-6 H-5 H-5 F-2 & J-7 D-9 B-22 J-11 H-12 F-5 & H-19 H-11 E-10 H-8 E-3 J-18 D-11 G-4 H-10 & J-10 B-20 C-6 H-2 B-2 D-15 J-5 H-5 B-13 B-19 B-19 B-16 B-3 B-6 thru B-9 B-15 B-14 B-13 B-11 E-8 D-11 J-9 J-2 E-4 H-18 L-22 A-84 A-83 B-18
WWW.TEXTRAIL.COM
INDEX
Spring Loaded Latches Spring Seats Springs Springs and Accessories - AIR LIFT Springs for Ramps Square Tube Swivel Jack Square U-Bolts Stabilizer Jack Stake Components Stake Pocket Steps (Folding & Weld-On) Stop / Turn / Tail Lights Straight Tongue Coupler Strap Hinges Straps Suitcase Latch Superwinch Electric Winches Suspension Hardware Tandem Axle Fenders & Fender Backs Tandem Axle Hanger Kits Tarp Kits Terminal Connectors Terminal Pliers TexTrail Packaged Towing Products TexTrail Value Finishes T-Handle Latches Tie Bolts Tie Loops Tie Plates Tipper Latch Tire & Wheel Assemblies Tires Tongue Box TORFLEX 09 2,000 lb TORFLEX 10 3,500 lb TORFLEX 11 6,000 lb TORFLEX 12 7,000 lb TORFLEX 12V 7,200 lb TORFLEX 13 8,000 lb TORFLEX 13D 10,000 lb Heavy Duty TORFLEX 13G 10,000 lb General Duty Torx Head Self Tapping Floor Screws Torx Screw Bits & Holder Towing Mirror Tractor, Halogen & Tow Lights J-9 A-87 B-18 B-30 H-15 D-10 B-23 D-12 J-11 H-16 & J-10 J-2 & J-7 L-2, L-10 & L-18 D-2 J-3 F-5 & H-19 J-9 D-16 B-26 H-3 B-4 H-19 L-30 thru L-31 L-31 E-13 G-6 J-4 B-21 F-2 & J-7 B-21 J-9 C-8 C-8 H-17 A-10 A-16 A-33 A-34 A-35 A-35 A-69 A-68 H-10 & J-10 H-10 & J-10 J-2 L-22 Tradesman Boxes Trailer Connectors Trailer Dolly Transmission Fluid Trim Triple Axle Fenders & Fender Backs Triple Axle Hanger Kits Triple Ball Mount Truck Control Kit Truck-Tack Boxes Turn Signal Lights Two Speed Winches U-Bolt Hardware U-Bolt Kits U-Bolts Underbody Box Utility Lights Vacuum / Hydraulic Brake System Vacuum Pump Kit Valspar Finishes Valve Stems Vents VHB Tape Warn Electric Winches Warning & Specification Decals Water Caddy Water Cooler Rack Web Winder Wedge Caps Weight Distribution Hitches Wheel & Tire Assemblies Wheel Bolts Wheel Chock Wheel Covers Wheel Mounting Hardware Wheel Nets Wheel Nuts Wheel Simulators Wheel Studs Wheels Winch Bar Winch Ratchets Winch Strap Wire & Cable Wiring Harnesses H-18 L-28 F-6 G-3 H-8 & H-9 H-4 B-8 E-4 K-14 H-17 L-11 & L-19 D-15 B-22 B-18 B-20 H-17 L-12 & L-22 K-14 K-14 G-6 C-5 H-8 G-2 D-16 G-2 H-13 H-13 F-5 H-5 E-8 C-8 A-92 D-12 & F-6 C-6 A-91 F-5 A-92 & C-5 C-6 A-92 C-7 F-5 F-5 D-15 L-35 - L37 L-28
WWW.TEXTRAIL.COM