Technical Data Clarification of liquids Continuous separation of solids from oil-water mixtures with very high solids content (< 60%) Available for onshore and offshore installation; gastight design
Benefits
High separation efficiency Low energy consumption Deep pond design Easy installation, operation and maintenance
Additional equipment
(at extra cost) Motor control unit Tools and set of spare parts Feed pump Every decanter is also available as a complete unit, including auxiliary equipment
Features
High capacity range up to 30 m / h 2-phase or 3-phase separation
2-phase decanter
1
6 4
2 3 5 8
3-phase decanter
1 Product feed
1
5 Separation chamber 6 Solids discharge 7 Discharge of the heavy liquid phase 8 Discharge of the light liquid phase
Technical data Bowl Diameter Length / diameter ratio Bowl speed g-force, (z) Bowl motor Rating Speed at 50 Hz / 60 Hz Shipping data
CC 450
CC 458
Application
Waste / used / slop oil treatment Waste emulsion treatment Oil sludge treatment (from lagoons, ponds) Oily water / slop water treatment (Marpol oil, bilgewater) Drain water on rigs Drilling mud / fluids Lime slurry (oil sands) Coal tar treatment
Dimensions in mm
Decanter weight without motor approx. 2440 kg Motor (22 / 30 / 37 kW) Secondary motor (11 kW) Case dimensions approx. 160 / 250 / 300 kg approx. 104 kg 315 x 125 x 160 cm
approx. 2980 kg approx. 160 / 250 / 300 kg approx. 104 kg 315 x 125 x 160 cm
Components Bowl and scroll Scroll flight hard-facing Solids outlet ports Seals, inner bearings Drive
Option 1 Duplex steel Sprayed tungsten carbide Exchangeable NBR (Perbunan) / P.T.F.E. Standard drive Hydraulic drive Chute
Option 2 Super duplex steel Sintered tungsten carbide tiles Viton 2-gear drive with adjustable bowl speed via VFD (Variable Frequency Drive) Slide valve
Solids discharge
Min. lifting capacity of trolley hoist for service and maintenance: 1500 kg
Mechanical Separation