1-
Calculations Software
The software's that will be used in our calculations are: HAP 4.41 (Hourly analysis program) for cooling load and equipment capacity calculations.
2-
3-
Design Conditions
The selection of the appropriate HVAC design conditions (inside design conditions, outside design condition, internal load sources intensity and building thermal characteristics) has a direct impact on: The estimation of the ventilation and cooling capacity of the system. The sizing of the HVAC system components. The verification of the requirements of the thermal comfort and indoor air quality inside the building.
Temperature listed in the Equipment Schedule. These conditions express the actual weather conditions in KSA in these years. These outside design conditions are given in Table 1.
Outside Conditions Dry bulb Temperature C(F) Wet bulb Temperature C(F) Daily Range (K) (F) Elevation Lat. (deg) m(ft)
26.3 N
5-
Applications
Design Temperature ASHRAE RECOM. 23-26 (C) PRESENT DESIGN 221 (C)
All zones
6- Occupancy density
As per furniture layout
7- lighting
As per approved lighting shop drawings
9- Equipment loads
As per ASHRAE2007
This equipments load for covering equipments load and any misalliances load.