MACHINING
CENTER
Its Faster.......
Triplo sub-spindle and soware - delivers 3- tools in the cut Eurotech gap eliminaon 7000 rpm on the main spindle 7000 rpm on the sub-spindle Index me 0.1 - bidireconal servo turrets
15 Horsepower on the main and sub-spindle Rigid xed head stock design
Minimal Floor Space - 149 x 55 Great access for fast, easy setup Great chip ow with no shelves
Easily run non-round bar, including hex and extruded stock. Load chucked parts, blanks, forgings and casngs. Hold ght roundness tolerances with ease. Reduce cycle mes by running at
higher RPM.
Turn parts using mulple passes. Drill deep holes with ease. Eliminate most chip control issues. Take heavy cuts with 15 HP. Great access for setup and operator.
Save material because bar remnants are less than half the length of machines with guide bushings
In a nutshell; Faster cycle mes, Faster setup mes with more exibility.