1 2
Bulk Silo
6 3 4
5
Client process
System Components
Technical Specifications
1 Vacuum receiver............................. Stainless steel construction 316L, standard volumes from 50 to 1000 dm3 [1.8 to 35 ft3] with integral reverse jet filter and optional discharge aids 2 Weighing System ........................... Suspension system with three load cells with amplifiers 3 Discharge valve.............................. Pneumatically actuated butterfly valve (fail safe) 4 Weighing frame.............................. Painted mild steel or stainless steel construction available. Weighing frame includes stabilization bars 5 Control panel.................................. PLC-based controller with 10" touchscreen display, recipe storage and stock control (inventory) 6 Vacuum power unit......................... Motor driven vacuum pump, sized according to application throughput and distance 7 Material pick-up.............................. Material conveyed from silos, semi bulk or bag dump stations 8 Material selection valves................ Air operated stainless steel ball valves
Rev. 2009-03 Doc# 0690023302
www.ktron.com
I-501102-en Page 1 of 2
K-TRON PREMIER Product Information Batch Weigh Vacuum Receiver Standard Design Specifications
Batch accuracy................................... 0.5% of full scale capacity Standard receiver volumes................. 50, 100, 200, 500, 1000 dm3 [1.8, 3.5, 7, 17.7, 35 ft3] Material of construction (receiver)...... 316L stainless steel Surface finish (receiver)...................... Electropolish Welds (receiver).................................. Dressed smooth Weighing frame.................................. Mild steel, epoxy coated, welds as layed Load cells........................................... To customer specification Load cell amplifier.............................. 4-20 mA output, suitable to interface with customer controls Reverse jet filter.................................. Multi-cartridge, auto-clean, large area Discharge valve.................................. Pneumatically operated butterfly valve with stainless steel disk Gaskets/seals..................................... FDA compliant food quality Controls.............................................. PLC-based controls for up to 8 ingredients Throughput ranges............................. Based on bulk density of 0.5 kg/dm3 [31 lb/ft3] receiver volume dm3 [ft3] 50 [1.8] 100 [3.5] 200 [7] 500 [17.7] 1000 [35] batch application kg/hr [lb/hr] < 1000 [2200] < 1500 [3300] < 2000 [4400] < 3000 [6600] < 4000 [8800]
totalizing application kg/hr [lb/hr] <1500 [3300] <2000 [4400] n/a n/a n/a
Options
Discharge aids .................................. Fluidizing pads, vibration or fully fluidized cone Weighing frame ................................. 316L stainless steel construction Hazardous area version..................... ATEX category 3D, load cell amplifier to be mounted remotely
Dimensions mm [in]
3"O/D VACUUM 3 O/D VACUUM
A
1300 [51] 1750 [69] 2500 [98] 2500 [98] 2800 [110]
B
900 [35] 900 [35] 900 [35] 1300 [51] 1400 [55]
C
200 [8] 200 [8] 200 [8] 200 [8] 200 [8]
D
300 [12] 450 [18] 450 [18] 1000 [39] 1200 [47]
E
400 [16] 500 [20] 900 [35] 900 [35] 1300 [51]
F
1400 [55] 1400 [55] 1800 [71] 2400 [94] 2400 [94]
50 [1.8]
3"O/D CONVEY 3 O/D CONVEY
D
A
1000 [35]
F B
Note: For more information on these products consult your K-Tron / Premier Sales Representative. Caution: Measurements are for general reference only. Please consult dimensional drawing for exact measurements.
www.ktron.com
All addresses on sheet: / Alle Adressen auf Blatt: / Toutes les adresses sur fiche: I-000001
Copyright by K-TRON. Covered by patents in USA and other countries. Specifications subject to change without notice.
I-501102-en Page 2 of 2