AHC H Series Hydraulic Winch The standard TENSA AHC-H series winch can be used with wire rope or umbilical. It has a hollow shaft and the capability to accommodate slip rings. This allows the operator to mobilize the AHC winch to any vessel for different applications (e.g. ROV) if necessary. The intelligent level wind will automatically accommodate different wire or umbilical sizes. The HPU can be combined with the winch or supplied separately.
AHC-H Series Winch MODEL MAX SWL* Winch Drive Winch Dimension (L x W x H) Wire Capacity Line Speed** Umbilical/ wire diameter Design Temperature Design Heave** Accuracy
3.0mx2.2mx2.2m 4.4mx2.2mx2.2m
AHC-HB
12 tonnes
AHC-HC
20 tonnes Hydraulic
AHC-HD
30 tonnes
AHC-HE
50 tonnes
5.35mx2.5mx2.5m
1000m (Standard) - Up to 3300m on request 2.4m/sec 20mm-42mm 2.4m/sec 20mm-42mm 2.4m/sec 20mm-42mm -20C to +45C Seastate 6 (5m heave at 8 seconds ) Up to 95% accuracy - typically +/- 10 cm 2.4m/sec 20mm-42mm 2.4m/sec 20mm-42mm
* SWL for each model can be specified up to the maximum for that frame size. This may result in reduced motor and hydraulic component sizing. ** Power requirements, HPU size and cost can be significantly reduced if a lower heave specification is required.
TENSA Equipment Pty Ltd Perth Australia Tel: +61 8 9488 4500 www.tensaequipment.com.au
AHC E Series Electric Winch AHC-E winch series are driven by high efficiency electric AC motor with VSD controlled technology. The standard TENSA AHC-H series winch can also be used with wire rope or umbilical. MODEL SWL Winch Drive Rated Power Winch Dimension (L x W x H) Wire Capacity Line Speed Umbilical/ wire diameter Design Temperature Design Heave Accuracy AHC-EA
7 tonnes
AHC-EB
12 tonnes
5.35mx2.5mx2.5m
5.35mx2.5mx2.5m
-20C to +45C Seastate 6 (5m heave at 8 seconds ) Up to 95% accuracy - typically +/- 10 cm
AHC I Series In Line Compensator TENSA AHC-I series are the in-line AHC systems that are placed between any of the conventional winches and overboarding sheave. MODEL Max SWL Winch Drive Dimension (L x W x H) Max Line Speed Design Temperature Design Heave Accuracy AHC-IA
8 tonnes
AHC-IB
15 tonnes
AHC-IC
30 tonnes Hydraulic
AHC-ID
50 tonnes
AHC-IE
100 tonnes
tba 2.4m/sec
tba 2.4m/sec
tba 2.4m/sec
tba 2.4m/sec
CERTIFICATION All our standard AHC systems come with DNV certification. Winch - DNV Standard for Certification No. 2.22 Lifting Appliances Lifting Frame DNV Standard for certification No. 2.7.1 Offshore Containers
TENSA Equipment Pty Ltd Perth Australia Tel: +61 8 9488 4500 www.tensaequipment.com.au