1X / PEAP WITH RADIUS SERVER (IAS) AND ACTIVE DIRECTORY USING WIRELESS SWITCH THROUGH OF THE WIRELESS SWITCH MANAGER
WIRELESS SWITCH MANAGER 1. Configuring the Access Point Select the TAB Configuration Select the option Wireless Select the option Access Points Select the option Create Select the option Directly Connected MAP Uses wizard to configure to choose the AP model
2. Access Point Configured - Deploy the configuration to the Wireless Switch - Select the option Deploy
Select the TAB Configuration Select the option Wireless Select the option Wireless Services Select the option Create Select the option Open Access Service Profile Uses wizard to configure the SSID Open
4. Service Profile Open with the SSID Open Configured - Deploy the configuration to the Wireless Switch - Select the option Deploy
5. -
Configuring the RADIUS Client on WX Select the TAB Configuration Select the option AAA Select the option Radius Select the option Create Select the option Radius Server Uses wizard to configure the Radius
6. Radius Configured - Deploy the configuration to the Wireless Switch - Select the option Deploy
NOTE: The IP Address is the IP from the Radius Server (ie. IAS) The Key configured here must be the same configured on Radius Server (ie. IAS)
7. -
Configuring the the Service Profile 802.1X Select the TAB Configuration Select the option Wireless Select the option Wireless Services Select the option Create Select the option 802.1X Service Profile
8. Do not forget to select the Radius in the Service Profile 802.1X wizard - Select the EAP Type: External RADIUS Server - Select the Server Group configured previously on Avaliable RADIUS Server Groups
9. Service Profile 802.1X Configured - Deploy the configuration to the Wireless Switch - Select the option Deploy
ACTIVE DIRECTORY 10. Configuring the group on Active Directory - Open the Active Directory Users and Computers - Select Users under Domain (ie LAB3COM) - Right-Click in Users - Select New / Group
11. Configuring the Users on Active Directory - Select Users under Domain (ie LAB3COM) - Right-Click in Users - Select New / User
Enter with the First Name Enter with the User logon name
12. Configuring the user to the group on Active Directory - Double-click in the user created - Select the TAB Member Of
Click on Add
Enter with the name of the group created in the option Enter the object names to select
IAS RADIUS 1. Configuring the Radius Client on IAS - Right-Click on RADIUS Client - New RADIUS Client
Enter with the name Enter with IP from Radius Client (This the IP from Wireless Switch)
Select the Client-Vendor Enter with the Shared secret (This the same configured on Wireless Switch). The key configuration on WX was described on item 6 of this manual.
2. Configuring the Remote Access Policies on IAS - Right-Click on Remote Access Policies - Select New Remote Access Policy
Enter with the name of the group in the item Enter the object names to select
3. Configuring the IAS to use the AD - Right-Click on Internet Authentication Service (Local) - Select Register Server in Active Directory
WIRELESS CLIENT CENTRINO 1. Configuring the Client - Open the Wireless Connection - Select Properties
Enter with the SSID Select the Network Authentication Select Data Encryption
Uncheck the option Validate server certificate Select the Authentication Method (EAP-MSCHAPv2) Click on Configure
Uncheck the option automatically use my Windows logon name and password (and domain if any).
EVENT VIEWER 1. Troubleshooting - The event viewer can be used to verify if the Radius packet is being analyzed by the Radius Server - Select Administrative Tools / Event Viewer