These PFA lined ball valves are used in a wide variety of applications in many industries.
Features
PFA lining offers highest corrosion resistance. Bubble tight shut-off: precision machined ball and seats help guarantee a leak-free valve. Full bore offers high Cv value equal to the pipe. One-piece ball/stem: helps eliminate possibility of damaging PFA lining on ball by the stem, no hysteresis, ideal for flow control applications. Specific anti blow-out shaft design, which can not be affected by the media, according to API 609. Static electricity: any buildup of static electricity is eliminated since the ball/stem and the housing are of the same potential. Constant torque: the unique two-piece body construction together with the spring loaded seats mean a constant torque even after months of operation. TA-Luft VDI 2440 approved. The self adjusting packing is maintenance free and helps provide a leak-free stem seal. The hand lever features a positive locked position in the open and closed position for type NTB, and six intermediate positions for type NTC. The body has a thermally applied polyester powder coating (RAL 9002) which offers excellent protection against external corrosion and rust. Direct mounting according to ISO 5211.
Technical Data
Size (inch): Temperature: Pressure range:
1/2"
General Application
to 6" -40F to +400F vacuum 0.1 mbar to 232 psi NeoTecha ball valves are ideally suited for corrosive applications, requiring reliable performance, tight shut-off, constant torque and no maintenance. The valves successfully handle a multitude of corrosive applications in industries such as chemical, petro-chemical, pharmaceutical, pulp and paper, foundries and mining like sulphuric acid, etc. This unique design and the self adjusting stem seal (U.S. Patent 4.696.323) are two of the reasons behind the excellent performance and broad industry acceptance of this valve.
Flange connections: DIN PN 16, ANSI 150, JIS B 2212 10 K Face-to-face: DIN/EN 558-1, row 1 ANSI B 16.10
Flow Control
NeoTecha and C-ball are either trademarks or registered trademarks of Tyco International Services AG or its affiliates in the United States and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Copyright 2009 Tyco Flow Control. All rights reserved. NEOJV-0040-US-0912
NeoTecha PFA Lined Ball Valves - Type NTB-and NTC NTB and NTC
Features Type NTB Type NTC
10 9
7a 4
10
5
1.
11
11a
Every valve has a mounting flange according to ISO 5211 which simplifies the mounting of any actuator built to this standard. A set of Belleville disc springs exert uniform loading on the packing, resulting in a maintenance-free operation. Flexible and corrosion resistant virgin PTFE packing ensures a leak-free stem seal (TA-Luft VDI 2440 approved). Full bore design resulting in high Cv value, especially required when high viscosity liquids have to be controlled. The PFA lining is 3 mm thick and is spark tested at 30,000 Volts. This ensures a homogeneous PFA lining, void of any pinholes, giving protection against diffusion and corrosion. The liner is locked to the casting by means of machined dovetails in the casting, permitting the valve to be used on high vacuum and elevated temperature without the danger of a liner collapse. The one-piece trunnion mounted ball/stem ensures uniform support of the ball. The energized seats keep in constant contact with the ball under all operating conditions. Wear and tear on the seats is reduced, resulting in an
2.
increased operating life. The C-ball reduces flow distortion and provides excellent regulating characteristics. An ideal control valve for highly corrosive or sterile products. 7a. The C-ball reduces flow distortion and provides excellent regulating characteristics. The C-ball design is also an ideal control valve for highly corrosive and sterile conditions. 8. Available in DIN and ANSI face-to-face dimensions, which allow an easy replacement of plug and diaphragm valves. Locked-in energized seats ensure both upstream and downstream bubble-tight sealing, constant operating torque, and extended service life versus a floating ball seat design which depends on differential pressure for sealing.
11a. The C-ball valve has no dead space and is ideally suited for tight shut-off and control of hazardous, solidifying or high purity products where it is imperative that no product is entrapped in the ball and surrounding cavity. 12. Full proof anti blow-out shaft design, located in the dry area of the valve and therefore unaffected by the media.
3.
4.
5.
9.
12
Blow-out proof provision Spring package
6.
10. Rugged symmetrical body halves made from ductile iron (GGG 40.3), coated on the outside with polyester powder coating which offers excellent corrosion protection. 11. The split body design allows the dead space between the ball stem and housing to be kept to an absolute minimum. The C-ball version is free of dead space.
7.
Spindle seal
NEOJV-0040 2
NeoTecha PFA Lined Ball Valves - Type NTB-and NTC NTB and NTC
Construction, Assembly and Materials
Note:
1. Mounting flange according to ISO 5211.
NEOJV-0040 3
NeoTecha PFA Lined Ball Valves - Type NTB- and NTC NTB
Technical Data
Type NTB
Operating Torques and Cv-Values
Size inch
1/2 3/4
Technical Data
Cv 13.9 20.8 42.8 111.0 196.5 439.3 566.4 901.7 2196.4
Torque (max torque at 232 psi) [mm] Nm 20 20 30 50 70 145 145 190 350 in/lbs 177 177 266 443 620 1283 1283 1681 3096
1/2"
to 6"
-40F up to +400F vacuum 0.1 mbar to 232 psi (see diagram) ANSI 150, 300 DIN PN 16, JIS B 2212 10 K ANSI B 16.10 DIN 3202/T1/F1
1 11/2 2 21/2 3 4 6
Face-to-face:
Pressure-temperature Diagram
232 203 174 145 116 psi 87 58 29 Vacuum 0.1 mbar 0
-40
-4
32
122
212
302
356
410 F
75
50
to 6"
25
/2"
NEOJV-0040 4
NeoTecha PFA Lined Ball Valves - Type NTB- and NTC NTC
Technical Data
Type NTC
Technical Data
Size (inch): Temperature: Pressure range: Flange connections:
1/2"
Size [mm [15 [20 [25 [40 [50 [65 [80 [100] [150]
Torque (max torque at 232 psi) Nm 10 10 15 25 35 75 75 110 200 in/lbs 89 89 133 222 310 664 664 973 1770
-40F up to +400F vacuum 0.1 mbar to 232 psi (see diagram) ANSI 150 DIN PN 16, JIS B 2212 10 K ANSI B 16.10 DIN 3202/T1/F1
Face-to-face:
1 11/2 2 21/2 3 4 6
Pressure-temperature Diagram
232 203 174 145 116 psi 87 58 29 0 Vacuum 0.1 mbar -40 -4 32 122 212 302 356 410 F
75
50
6"
25
/2"
to
60
90
NEOJV-0040 5
NeoTecha PFA Lined Ball Valves - Type NTB-and NTC NTB and NTC
The C-ball lined valve is dead spot free and is ideally suited for shut-off and control of corrosive, poisonous, crystallizing or high purity products where it is imperative that no product is entrapped in the ball and surrounding cavity. The C-ball valve is based on a full port design resulting in high C v values, which are especially required when high viscosity liquids have to be controlled or for those applications which require a large rangeability.
The advantage of the C-ball is a reduced flow distortion and excellent control characteristic. The optimization of the control valve performance is achieved with a custom characterized seat or the linear characterized V port seats which are available for 15, 20, 30, 40, 60 and 90.
W 30 V port
Remarks NTC valve standard with TFM seat Especially cleaned and treated for HCl & Cl2
1/2"
1/2"
1/2"
NEOJV-0040 6
NeoTecha PFA Lined Ball Valves - Type NTB-and NTC NTB and NTC
Hand Lever
Type ZE: lockable in end position Type Z for C-ball valve: lockable in six intermediate positions.
nxd 4x0.55 4x0.55 4x0.55 4x0.71 4x0.71 4x0.71 8x0.71 8x0.71 8x0.87
Weight (lb) 7.94 8.6 13.67 24.25 29.76 53.57 55.12 77.16 216.05
5.12 3/4 5.91 1 6.3 11/2 7.87 2 9.06 21/2 11.42 3 12.2 4 13.78 6 18.89 with spool piece
Flange Drilled ANSI B 16.5 Class 150, Face-to-face ANSI B 16.10 Class 150
Size inch
1/2 3/4
nxd 4x0.63 4x0.63 4x0.63 4x0.63 4x0.75 4x0.75 4x0.75 8x0.75 8x0.87
Weight (lb) 7.5 7.94 12.57 21.16 26.9 53.57 52.47 74.52 174.17
1 11/2 2 21/2 3 4 6
nxd 4x0.59 4x0.59 4x0.75 4x0.75 4x0.75 4x0.75 8x0.75 8x0.75 8x0.91
Weight (lb) 7.94 8.60 13.67 24.25 29.76 53.57 55.12 77.16 216.05
5.12 3/4 5.91 1 6.30 11/2 7.87 2 9.06 21/2 11.42 3 12.20 4 13.78 6 18.90 with spool piece
Gear Operator
Size inches
1/2 3/4
Weight [mm] [15] [20] [25] [40] [50] [65] [80] [100] [150] H 4.65 4.65 5.51 6.02 6.22 8.11 8.11 8.74 11.22 (lb) 15.65 16.09 21.16 31.75 37.26 69.67 71.21 93.26 269.41
1 11/2 2 21/2 3 4 6
A 5.91 5.51
B 7.64 8.39
D 7.87 9.84
E 2.80 3.35
F 1.81 2.76
G 1.10 1.38
NEOJV-0040 7
NeoTecha PFA Lined Ball Valves - Type NTB-and NTC NTB and NTC
G
Stem Dia. K 0.47 0.55 0.63 0.71 0.94 1.26 G M5 M6 M6 M8 H 0.87 0.87 0.87 1.32 1.32 1.26 h/h1 0.08 0.12 0.12 0.12 0.12 0.511 L 0.59 0.59 0.59 0.98 0.98 1.38 t 0.31 0.35 0.35 0.79 B
L t h1 h H
Notes:
1. All mounting flanges for a valve size 6" have a recess (h1). 2. The mounting pad is an integral part of the valve. Removal, alteration or modification will disturb live-loaded stem seal design and void warranty. Consult your local sales representative. Flange and stem dimensions are in inches. K
mounting flange2
d2 4 x d4
to C of L valve
ISO Flange F04 F05 F07 F054 F07 F10 F054 F07 F10 F074 F10 F12 F074 F10 F12 F14 F074 F10 F12 F14 F10 F12 F14 F16
4
A 3.74 3.66 3.66 4.53 4.53 4.53 5.04 5.04 5.04 5.24 5.24 5.20 6.73 6.61 6.50 6.50 7.36 7.24 7.13 7.13 9.70 9.57 9.37 9.37
B 1.18 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.04 1.22 1.08 0.96 0.96 1.22 1.08 0.96 0.96 1.20 1.06 0.87 0.87
C 0.45 0.49 0.61 0.61 0.73 0.89 0.61 0.73 0.89 0.73 0.89 1.08 0.73 0.87 0.98 1.18 0.73 0.87 0.98 1.18 0.93 1.06 1.26 1.57
d1 2.13 2.56 3.54 2.56 3.54 4.92 2.56 3.54 4.92 3.54 4.92 5.91 3.54 4.92 5.91 6.89 3.54 4.92 5.91 6.89 4.92 5.91 6.89 8.27
d2 1.18 1.38 2.17 1.38 2.17 2.76 1.38 2.17 2.76 2.17 2.76 3.35 2.17 2.76 3.35 3.94 2.17 2.76 3.35 3.94 2.76 3.35 3.94 5.12
d3 1.65 1.97 2.76 1.97 2.76 4.02 1.97 2.76 4.02 2.76 4.02 4.92 2.76 4.02 4.92 5.51 2.76 4.02 4.92 5.51 4.02 4.92 5.51 6.50
d4 0.21 0.28 0.35 0.28 0.35 0.43 0.28 0.35 0.43 0.35 0.43 0.51 0.35 0.43 0.51 0.70 0.35 0.43 0.51 0.70 0.43 0.51 0.70 0.87 0.43 0.55 0.70 0.55 0.70 0.87 0.55 0.70 0.87 0.70 0.87 1.06 0.70 0.87 1.06 1.42 0.70 0.87 1.06 1.42 0.87 1.06 1.42 1.81
s3 x x x x x x x x x x x x x x x x x x x x x x x x 0.43 0.55 0.70 0.55 0.70 0.87 0.55 0.70 0.87 0.70 0.87 1.06 0.70 0.87 1.06 1.42 0.70 0.87 1.06 1.42 0.87 1.06 1.42 1.81
Notes:
Flange and stem dimensions are in inches. 3. Diagonal square to DIN 3337. 4. Flange dimensions for standard ball valves. Removal, alteration or modification will disturb live-loaded stem seal design and void warranty. Consult your local sales representative.
Tyco Flow Control (TFC) provides the information herein in good faith but makes no representation as to its comprehensiveness or accuracy. This data sheet is intended only as a guide to TFC products and services. Individuals using this data sheet must exercise their independent judgment in evaluating product selection and determining product appropriateness for their particular purpose and system requirements. TFC MAKES NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE INFORMATION SET FORTH HEREIN OR THE PRODUCT(S) TO WHICH THE INFORMATION REFERS. ACCORDINGLY, TFC WILL NOT BE RESPONSIBLE FOR DAMAGES (OF ANY KIND OR NATURE, INCLUDING INCIDENTAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES) RESULTING FROM THE USE OF OR RELIANCE UPON THIS INFORMATION. Patents and Patents Pending in the U.S. and foreign countries. Tyco reserves the right to change product designs and specifications without notice. All registered trademarks are the property of their respective owners. Printed in the USA.
NEOJV-0040 8
www.tycoflowcontrol.com