COLD RESET
The cold reset clears all data including preset data stored in the EEPROM to initial conditions. Execute this mode when returning the set to the customer. Procedure: 1. Press [?/1] button to turn on the system. 2. Press [x] button, [ENTER] button, and [?/1] button simultaneously. 3. COLD RESET appears on the uorescent indicator tube. After that, the uorescent indicator tube becomes blank for a while, and the system is reset.
VACS ON/OFF
This mode is used to switch ON and OFF the VACS (Variable Attenuation Control System). Procedure: 1. Press [?/1] button to turn on the system. 2. Press [x] button, [DISC 2], and [DISPLAY] button simultaneously. The message VACS OFF or VACS ON appears on the uorescent indicator tube.
16