3739A
Service 0422 S/Section 11A V
XC0
5 F 1
W G E R
Trafic Master
11A
XLX XLX
C B
XDX P
Engine: Gearbox:
This technical note deals with the remove and refit of the accessories belt for F9Q engines equipped with an automatic tensioner.
"The repair methods given by the manufacturer in this document are based on the technical specifications current when it was prepared. The methods may be modified as a result of changes introduced by the manufacturer in the production of the various component units and accessories from which his vehicles are constructed."
All copyrights reserved by RENAULT. Copying or translating, in part or in full, of this document or use of the service part reference numbering system is forbidden without the prior written authority of RENAULT.
RENAULT 2002
11A
WARNING NEVER TURN THE ENGINE IN THE DIRECTION OPPOSITE TO THAT OF NORMAL OPERATION.
Special notes concerning engines fitted with an auto tensioner: BELT REMOVAL Remove the belt.
Depending on ease of access to the engine, place tool Mot. 1676 on the belt section: alternator-compressor or crankshaft-fixed roller. Maintain the force created by belt torsion until the tension wheel pretensioning torque plate can be inserted manually.
11A-1
11A
Keep the tension wheel in the high position. Install the belt, ending with the tension wheel.
11A-2
11A
The tension wheel is now tightened in position. Tensioning of the tension wheel: Depending on ease of access to the engine, place tool Mot. 1676 on the belt section: alternator-compressor or crankshaft-fixed roller. Once the belt has been centred on the tool's rollers, take a ratchet spanner and apply a rotation movement to tension the belt.
11A-3
11A
11A-4
11A
Apply tension to the tension wheel while gradually relaxing the force. The tension wheel is now ready to operate.
11A-5