system. The lightning current safely deflected by the interception and arrester system is routed to the ground. The equipotential bonding performs an additional task between the arresters and as an equipotential bonding controller in passable areas.
224 TBS
Earthing systems
System overview
Principles
Products
TBS 225
Earthing systems
System overview
Conducter material
from P. 228
Connection termin
226 TBS
Corrosionproofing band
from P. 243
nal
from P. 239
TBS 227
Deep earther A deep earther is an earther, which is generally integrated vertically and deep into the ground. The simplest solution for retrofitting a lightning protection system.
Ring earther A ring earther is a surface earther, which if possible is installed as a closed ring at a distance of 1.0 m and 0.5 m deep into the ground around the external foundation of the building. The better, although more expensive, solution for retrofitting a lightning protection system.
Foundation earther A foundation earther (acc. to TAB 1974 specified for new buildings) is embedded into the concrete foundation of a building. It then also acts as a lightning protection earther, if the lugs required for connecting the arresters protrude from the foundation.
Deep earther A deep earther (arrangement Type A) is an earther that is generally integrated vertically and deep into the ground. As single earthers, a deep earther of 9.0 m in length is recommended. This should be installed at a distance of 1.0 m from the foundation of the building. As a minimum dimension (acc. to DIN VDE 0185 Part 3 Fig. 2) a length of 2.5 m for vertical installation and 5 m for horizontal installation apply for Type A earthers for lightning protection classes III and IV. The required earther lengths may be split into several lengths connected in parallel. Depending on the soil conditions, deep earthers can be driven into the ground by hand or by using suitable electric, petrol or pneumatic hammers. All deep earthers must be connected with a ring earther inside or outside of the building and with a lead to the PAS.
The following materials can be used: Rods from galvanised steel 20 mm Rods from stainless steel 20 mm Pipes from galvanised steel 25 mm (2 mm wall thickness) Flat conductors from galvanised steel 30 x 3.5 mm Flat conductors from stainless steel 30 x 3.5 mm In potentially corrosive areas, stainless steel must always be used. Detachable connections in the ground must be protected against corrosion (plastic corrosion protection strip).
Round conductors
1m
228 TBS
Ring earthers (surface earthers) Outside the building, at least 80% of the ring earthers overall length must be in contact with the ground. It must be installed as a closed ring at a distance of 1.0 m and a depth of 0.5 m around the external foundation of the building. A ring earther is an earther according to arrangement type B.
The following materials can be used: Flat conductor galvanised steel 30 x 3.5 mm Flat conductor stainless steel 30 x 3.5 mm Round conductor copper, 8 mm Round conductor 10 mm, galvanised steel Round conductor 10 mm, stainless steel In potentially corrosive areas, stainless steel (V4A) must always be used. Detachable connections in the ground must be protected against corrosion (plastic corrosion protection strip).
Flat conductor
Cross-connectors
1m
Round conductors from page 186
Foundation earthers A foundation earther is an earther that is embedded into the concrete foundation of a building. It acts as a lightning protection earther if the lugs required for connecting the arresters protrude from the foundation. The steel strip is to be attached / connected to reinforcements at a distance of approx. 3 m. DIN 18014 forms the basis for constructing external lightning protection systems. Wedge connectors must not be inserted into the ground. In order to achieve a clean insertion, the use of strip holders is recommended for the installation of foundation earthers. The holders must be inserted at a distance of approx. 2 m.
The following materials, among others, can be used for foundation earthers: Flat conductor galvanised steel 30 x 3.5 mm Flat conductor stainless steel 30 x 3.5 mm Round conductor copper, 8 mm Round conductor 10 mm, galvanised steel Round conductor 10 mm, stainless steel In potentially corrosive areas, stainless steel should always be used at the entry and exit points on the concrete.
Flat conductors
Diagonal terminals
Spacers
20 x 20 m
TBS 229
Earthing systems
Earthing systems Flat conductor, steel galvanised
Type
Material Surface Dimension symbol finish BxH Normal ring
Conduction material
Pack. m Weight borders
Item No.
Price /% m
mm
ca. m
ST
/ FT
St St St St St St St St
FT FT FT FT FT FT FT FT
25 x 3 25 x 3 30 x 5 40 x 4 40 x 5 30 x 3 30 x 3,5 30 x 3,5
100 30 80 75 50 30 30 FIX 50
100 59,700 5020 15 8 30 59,700 5020 75 1 80 120,100 5020 37 9 75 128,100 5020 41 7 50 160,100 5020 43 3 30 72,100 5020 80 8 30 84,000 5020 83 2 50 84,000 5020 95 6
5052: Flat conductor/strip steel in rings Zinc layer: 225g/m (approx. 30 m) Application: foundation earthing, not laid inground.
Conduction material
Pack. m Weight borders
Item No.
Price /% m
mm
ca. m
ST
/ FT
5052/ DIN 5052/ DIN 5052/ DIN 5052/ DIN 5052/ DIN 5052/ DIN
St St St St St St
FT FT FT FT FT FT
5052: Flat conductor/strip steel in rings (conforms to DIN EN 50164-2) DIN 48801 Zinc layer: 500g/m (approx. 70 m) Area of application: Lightning protection and earthing
Conduction material
Pack. m Weight borders
Item No.
Price /% m
mm
ca. m
V2A V4A
5052-VA 5052-VA
V2A V4A
30 x 3,5 50 30 x 3,5 50
50 50
5052VA: Flat conductor/strip steel in rings Conforms to the requirements according to DIN V VDE V 0185-3, Table 8 From stainless steel, for use in potentially corrosive areas From stainless steel V4A, for use inground Area of application: Lightning protection and earthing
Conduction material
Pack. m Weight borders
Item No.
Price /% m
mm
ca. m
Cu
FL20/Cu
Cu
20 x 2,5 45
45
44,500 5021 80 4
FL20/Cu: Flat conductor/strip steel in coils (to DIN EN 50164-2) Version: E-Cu S7 F24 soft Area of application: Lightning protection and earthing
Type
Normal ring
Weight borders
Item No.
Price /% m
mm
ca. m
mm
Al
8 8 10
50 150 50 150 78 95
-T Tordier quality
RD ...-ALU: Round conductor Conforms to the requirements according to VDE V 0185-305, (IEC 62305) Aluminium RD 8/ALU: halbhart (E-AlMgSi0.5 to DIN 48801) RD 8/ALU-T: tordierbar (E-AlMgSi0.5 to DIN 48801) RD 10/ALU: Rein-Aluminium(E-Al to DIN 48801)
230 TBS
Conduction material
Earthing systems
Earthing systems
Conduction material
Type
Material Nominal symbol size Normal ring Crosssection
Price /% m
mm
ca. m
mm
ST
/ FT
RD 8 RD 10
St St
8 10
125 ( 2 m) 80 ( 2m)
50 78
RD ...: Round cable (to DIN EN 50164-2) Fulfils the requirements to VDE 0185-305 (IEC 62305) RD 10 can also be used in earth Galvanised steel Zinc coating: 50 m average value (approx. 350g/m)
Conduction material
Type
Material Nominal symbol size Normal ring Crosssection
Price /% m
mm
ca. m
mm
Cu
RD 8/Cu RD 10/Cu
Cu Cu
8 10
100 ( 2 m) 50 ( 2 m)
50 78
RD ...Cu: Round conductor Conforms to the requirements according to VDE V 0185-305, (IEC 62305)
Conduction material
Type
Material Nominal symbol size Normal ring Cross- Pack. section
Price /% m
mm
ca. m
mm
V2A
8 10 8 10
RD ...-VA: Round conductor Conforms to the requirements according to VDE V 0185-305, (IEC 62305) From stainless steel V4A, for use inground
Conduction material
Type
Nominal Material size symbol
Price /% m
mm
Al
RD 8/PVC
8/11
Al
RD ...: Round conductor Conforms to the requirements according to VDE V 0185-305, (IEC 62305) With PVC sheathing
Type
Normal ring
Crosssection
Pack. m
Weight borders
Item No.
Price /% m
ca. m
mm
ST
/ FT
RD 10/PVC St
FT
75 (+/- 2 m)
78
75 67,200 5021 16 2
RD ...: Round conductor Conforms to the requirements according to VDE V 0185-305, (IEC 62305) With PVC sheathing
Conduction material
Type
02 TBS-Katalog 2008 / en / 28/05/2008 (LLExport_00596)
Rope
Dimen- Material sion d symbol
Pack. m
Weight borders
Item No.
Price /% m
mm
Cu
S9/Cu
D
9 Cu
TBS 231
Earthing systems
Earthing systems Earthing rod system ST
Type Length Outer- Pack. mm mm pcs Weight kg/% pc
Item No.
219/20 ST 219/25 ST
1500 1500
20 25
219/.. ST: Earthing rod connection for standard applications: High corrosion resistance Zinc support 70 m With peg and bore for linking together Round pegs with two knurls Conforms to the requirements according to DIN VDE 0185-305 (IEC 62305)
LE-Erder LE-Erder
1500 1000
25 25
LightEarth" earthing rod Expandable earthing rod system for erecting earthing connections type A) High corrosion protection with reinforced zinc layer Also suitable for difficult soil conditions The LightEarth earthing system is connected using the pre-mounted sleeve Satisfies requirements according to DIN VDE 0185-305 (IEC 62305) For use with antenna earthing systems, lightning earthing systems, etc.
LE-Erder
1500
25
5 235,000 5000 33 0
LightEarth" earthing rod Expandable earthing rod system for erecting earthing connections type A) High corrosion protection with reinforced zinc layer Also suitable for difficult soil conditions The LightEarth earthing system is connected using the pre-mounted sleeve Satisfies requirements according to DIN VDE 0185-305 (IEC 62305) For use with antenna earthing systems, lightning earthing systems, etc.
20 20
219/..BP: Earthing rod connection with high contact force DIN 48852, Form Z, BP system (Bundes Post) Verygood contacting properties with lead ball in the bore hole With peg and bore for linking together V4A version, high-grade stainless steel (Material no. 14571) Conforms to the requirements according to DIN VDE 0185-305 (IEC 62305)
Type Length Outer- Pack. mm mm pcs Weight kg/% pc
Item No.
Price /pc
ST
/ Cu
02 TBS-Katalog 2008 / en / 28/05/2008 (LLExport_00596)
20
10 365,400 5000 50 5
219/..BP: Earthing rod connection with high contact force DIN 48852, Form Z, BP system (Bundes Post) Verygood contacting properties with lead insert in the bore hole With peg and bore for linking together Cu version with a 0.5mm copper sheath Conforms to the requirements according to DIN VDE 0185-305 (IEC 62305)
232 TBS
Earthing systems
Earthing systems
Deep earther and plate earther
Type
44
Price /pc
ST
/ FT
219/20 219/20
2000
20 20 25
219/25
5 577,200 5000 02 5
DIN 48852, Form Z, OMEX system With peg and bore for linking together With hardened steel pins Version FT with zinc support,min. 60 m Conforms to the requirements according to DIN VDE 0185-305 (IEC 62305)
Weight kg/% pc
Item No.
Price /pc
pcs
ST
/ FT
LE- Spitze St
FT
10
10,000 3041 40 9
45
Pack. pcs
Weight kg/% pc
Item No.
Price /pc
TG
/ FT
1819/20BP 1819/25BP
20 25
10 10
1819/..BP: Striking point formounting on earthing rod connection Suitable for ST and BP system
Type
For deep earth connection mm
Pack. pcs
Weight kg/% pc
Item No.
Price /pc
TG
/ FT
1819/20 1819/25
20 25
10 10
1819/...: Striking point formounting on earthing rod connection Suitable for OMEX system DIN 48852, Form Sp
Price /pc
ST
/ FT
LE- Kopf
70,000 3042 30 8
LE head: Striking head for driving earthing rods using hand-held hammer
80
1.5
Type
50
Pack. pcs
Weight kg/% pc
Item No.
Price /pc
ST
1820/20 1820/25
20
20 25
1 1
1820/..: Hardened for driving earthing rod connections with hand-held hammer Suitable for ST, BP and OMEX systems Hardened DIN 48852, Form SP
TBS 233
Earthing systems
Earthing systems Hammer insert for earthing rod
Type
For deep Pack. earth connection pcs mm
Price /pc
ST
2500/20 2500/25
20 25
2500/...: Hammer insert for vibration hammers Manufactured by Cobra BBM47 SPA-Super, Tex11 and COBRA 248 Fits earthing rod system ST, BP and OMEX Hardened
Type
2510/20
20
1 310,000 3043 31 2
47
Type
2520/...: Hammer insert for vibration hammers Manufactured by Wacker BHF 25, BHF 30S, EHU 25/220 Fits earthing rod system ST, BP and OMEX Hardened
Type
37
16.9
10 5 26 17.9 240
2530/20 2530/25
20 25
2530/...: Hammer insert for vibration hammers Manufactured by Bosch USH 10, HSH 10 Fits earthing rod system ST, BP and OMEX Hardened
19
Type
Weight kg/% pc
Item No.
Price /pc
60
ST
2535/20 2535/25
20 25
Hammer inserts for vibration hammers of other types and manufacturer on request.
2535/...: Hammer insert for vibration hammers Manufactured by Hilti TE 52/42, TE 72/60, TE 92 Fits earthing rod system ST, BP and OMEX Hardened
Type
For deep Pack. earth connection pcs mm
240
130
27
Weight kg/% pc
Item No.
Price /pc
ST
27
25
2.5
240
2520/20 2520/25
20 25
80
Weight kg/% pc
Item No.
Price /pc
ST
95
33.8
Manufactured by Atlas Copco, type FB 60 S-Super Fits earthing rod system ST, BP and OMEX Hardened
407
6.5
160
Weight kg/% pc
Item No.
Price /pc
4 5
ST
Weight kg/% pc
Item No.
Price /pc
ST
2536/20 2536/25
20 25
1 1
2536/....: Hammer insert for vibration hammers with SDS- Max/TEY-mounting Fits earthing rod system ST, BP and OMEX Hardened
234 TBS
Earthing systems
Earthing systems
Deep earther and plate earther
Type
Material symbol
Price /pc
ST
LE- Hammer LE- Hammer LE- Hammer LE- Hammer LE- Hammer
St St St St St
1 132,000 3043 60 6 1 76,000 3043 61 0 1 87,000 3043 61 4 1 76,000 3043 60 2 1 76,000 3043 61 8
ST
LE- Hammer ST
1 200,000 3043 62 8
LE hammer: Hammer insert for vibration hammers Suitable for LightEarth system 3043606 for Wacker (BHF 25, BHF 30S) 3043610 for Hilti (TE 52/42, TE72/60, TE92) 3043614 for Bosch (USH 10, HSH 10) 3043602 for SDS-Max 3043618 for Atlas Copco (Sechskantaufnahme) 3043628 for Bosch GSH27/UH27 (11304) / HS28 (12314) Hitachi H65SD Makita HM1500B / HM1800 Hardened
Price /% pc
mm
mm
ST
/ FT Cu
101/A
L
St Cu
1500 16 1500 16
101/A-Cu
Weight kg/% pc
Item No.
Price /% pc
mm
mm
pcs
ST
/ FT
101/F-1500 101/F-2000
St St
FT FT
1500 16 2000 16
101/F...: Interception rod with connection tabs With 2 attaching holes 12mm One end rounded
Type
Pack. pcs
Weight kg/% pc
Item No.
Price /% pc
mm
mm
V4A ST / FT
200VA1500
L
1500 16 1500 16
200
16
16
Type
Weight kg/% pc
Item No.
Price /pc
mm
mm
pcs
ST
204/KS 204/KS
St St
F F
400
With flange-welded connection lug Rd 10 (finalmetre) Withmounted heat-shrunk hose (corrosion proofing)
10
1000
TBS 235
Earthing systems
Earthing systems Earth entry rods
Type Fit mm Pack. pcs Weight kg/% pc
Item No.
204/KL
Rd 8-10
10
260,700 5430 15 1
L
25 16
ST
/ FT
22
5 5 5 3 3
60
110 L
11
213/DIN: Profile earthing rod connection Cross-profile 50 x 50 x 3mm With connecting strap 1 through hole 13mm 2 through holes 11mm
Type Length mm Pack. pcs Weight kg/% pc
Item No.
4
Price /pc
ST
/ FT
3 3 3 3 3
213/..../M: Profile earthing rod connection With 2m strip steel section FL30 x 3.5 With 2 through holes 11mm Does not conform to DIN 48852, Part 1
Type Length mm Pack. pcs Weight kg/% pc
Item No.
30
Price /pc
ST
/ FT
213/1500/F 213/2000/F
1500 2000
3 3
213/..../F: Profile earthing rod connection With 2m round conductor lugs Rd 10 Does not conform to DIN 48852, Part 1
10
Earthing plate
Type
Dimension BxLxS
Price /pc
FL
30 x3,5 11
mm
ST
/ FT
22
1816/F: Earthing plate as individual earth electrode With 3m strip steel section FL30 x 3.5 With 2 attaching holes 11mm
B S=3
236 TBS
L
3.5
Earthing systems
Earthing systems
Connection material
Type Fit mm
Dimen- Dimen- Material Surface Pack. sion A sion B symbol finish
Cross-connectors
Weight kg/% pc
Item No.
Price /% pc
mm
mm
pcs
ST
/ FT
255
max. FL30
52
52 St
FT
20 16,650 5314 51 8
255: Cross-connector for flat conductor Fit: Max. FL30 x FL30 With separator plate Installed with 4 hex-head screws M6 x 20 (F)
52
Type Fit mm
Dimen- Dimen- Material Surface Pack. sion A sion B symbol finish
52
Weight kg/% pc
Item No.
Price /% pc
mm
mm
pcs
ST
/ FT
255 A
max. FL30
60
60 St
FT
20 11,500 5314 53 4
255 A: Cross-connector for flat conductor Fit: Max. FL30 x FL30 Without separator plate Installed with 4 hex-head screws M6 x 20 (F)
A
Type Fit mm
Dimen- Dimen- Material Surface Pack. sion A sion B symbol finish
Weight kg/% pc
Item No.
Price /% pc
mm
mm
pcs
ST
/ FT
60 80
60 St 80 St
FT FT
Fit:max. FL30 x FL30,max. FL40 xmax. FL40 (F) Without separator plate Installed with 4 hex-head screws M8 x 25 and 4 hexagonal nuts M8 DIN 48845, Form H
Type
Fit mm
Weight kg/% pc
Item No.
Price /% pc
mm
mm
pcs
V2A
60
60 V2A
25 27,800 5314 72 0
256/A-DIN ..: Cross-connector for flat conductor Fit:max. FL30 x FL30,max. FL40 xmax. FL40 (F) Without separator plate Installed with 4 hex-head screws M8 x 25 and 4 hexagonal nuts M8 DIN 48845, Form H
Type
Fit mm
Weight kg/% pc
Item No.
Price /% pc
mm
mm
pcs
ST
/ FT
256/DIN 30 256/DIN 40
60 80
60 St 80 St
FT FT
Fit:max. FL30 x FL30 (256/DIN 30),max. FL40 x FL40 (256/DIN 40) With separator plate Installed with 4 hex-head screws M8 x 25 and 4 hexagonal nuts M8
A
Type Fit mm
Material Surface symbol finish
Pack. pcs
Weight kg/% pc
Item No.
Price /% pc
ST
252/FL DIN
60
8-10 x FL30 St
25 28,500 5312 65 5
252/FL DIN: Cross-connector for round conductor and flat conductor Fit: Rd 8-10 x FL30 Installed with 4 hex-head screws M8-25, 4 hexagonal nuts M8 (F) DIN 48845, Form F
60
TBS 237
Earthing systems
Earthing systems Cross-connectors
Type Fit mm
Material Surface symbol finish
Connection material
Pack. pcs Weight kg/% pc
Item No.
Price /% pc
ST
/ FT Cu
252/DIN
Rd 8-10 St
FT
252/Cu-DIN Rd 8-10 Cu
Pack. pcs
Weight kg/% pc
Item No.
Price /% pc
ST
/ FT Cu
252/DIN
Rd 8-10 x 16 St
FT
252/Cu-DIN Rd 8-10 x 16 Cu
Pack. pcs
Weight kg/% pc
Item No.
Price /% pc
ST
253
Rd 8-10 St
25 30,700 5312 60 4
253: Cross-connector for round conductor Fit: Rd 8-10 x Rd 8-10 Installed with 4 hex-head screws M8 x 25 and 4 hexagonal nuts M8 (F)
60
60
Price /% pc
Type
Fit mm
Pack. pcs
Weight kg/% pc
Item No.
ST
253
Rd 8-10 x 16 St
25 29,800 5312 80 9
253: Cross-connector for round conductor Fit: Rd 8-10 x Rd 16 Installed with 4 hex-head screws M8 x 25 and 4 hexagonal nuts M8 (F)
60
Type Fit mm
Material Surface Pack. symbol finish
Weight kg/% pc
Item No.
Price /% pc
pcs
ST
/ FT V2A
250 250/VA
FT
Fit: Rd 8-10 x Rd 8-10 Fit: Rd 8-10 x FL30 Fit: FL30 x FL30 Installed with 2 hex-head screws M8 x 20 (F)
30
238 TBS
60
58.55
Earthing systems
Earthing systems
Connection material
Type
Surface Dimenfinish sion L
Diagonal clamp
Fit mm Pack. pcs Weight kg/% pc
Item No.
Price /% pc
88
mm
ST
/ FT V2A
250/A-FT 250/A-VA
10
FT
30
250/AS-FT FT
25 26,000 5313 03 1
250/A...: Diagonal clamps For reinforced steels 6-22mm and flat conductor 50 x 4 Installed with screws M10 x 40 AS version with screws M10 x 20 Simple installation with open slot
Type
Material Surface symbol finish
Fit mm
Pack. pcs
Weight kg/% pc
Item No.
Price /% pc
ST
250/A-BO St
Rd 6-22/max. FL50
25 30,000 5313 06 6
250/A-BO: Diagonal clamps For reinforced steels 6-22mm and flat conductor 50 x 4 Installed with screws M10 x 25 Simple installation with open slot With flange-welded bolts M10 x 40, inc. 2 washers and 2 nuts
Connection material
Type
9
Parallel clamp
Material Surface symbol finish
Fit mm
Pack. pcs
Weight kg/% pc
Item No.
Price /% pc
40
ST
/ FT V2A ST
259/A 259/A-VA
St V2A St
FT
35
62
259/A St
259/A...: Parallel clamp For connecting reinforced steels 10-20mm Installed with screws M10 x 40
Connection material
Type Fit mm Pack. pcs Weight kg/% pc
ST
Price /pc
35
/ FT
32 50
32 40
1813/KL
50 18,000 5014 42 5
1813/DIN: Variable earth connector Suitable for connecting Rd 10 x FL30, FL30 x FL30 Quick installation using hex-head screw M10 x 20 (F)
Connection material
40 50
Type Fit mm Pack. pcs Weight kg/% pc
Item No.
Connection terminal
Price /% pc
ST / FT
1818
8 -10,0
10 17,600 5012 01 5
For connecting round conductor Rd 8-10 With 1 hex-head screw M12 x 40, 1 hexagonal nut M12 and 1 lock washer, stainless steel
Type Pack. pcs Weight kg/% pc
Item No.
Price /pc
ST
1814/FT 1814/ST
1814/...: Connection terminal For reinforced steels with diameters 814mm and FL 30x5 Simple installation with open slot Side suspension option
TBS 239
Earthing systems
Earthing systems Earthing fixed point
Type Thread Pack. pcs Weight kg/% pc
Item No.
Connection material
Price /pc
79 M10/M12 2 30
18 1 0
202
V4A
205/B: Earth fixing point For connecting to earthing systems, arresters and reinforcements With cover from plastic Contact plate: 79mm from high-grade stainless steel (V4A) 10mm clamping bolt Including plastic cover for simple installation
End piece
Type
Material Surface Dimensymbol finish sion D
Connection material
Pack. pcs Weight kg/% pc
Item No.
Price /% pc
mm
ST
/ FT V4A
St V4A V4A
FT
11 11 13
50 50 50
5011: End piece For attaching to steel structures or bolting to earthing fixed points For attachments: Round conductor Rd 8-10 and flat conductor FL30 x 3.5 2x attaching hole 11mm 1x attaching hole Dmm
Wedge connector
Type Fit mm Pack. pcs Weight kg/% pc
Item No.
Connection material
Price /pc
79 100 57
ST
/ FT
1813/DIN
10/FL30 x FL30
5 20,000 5014 21 2
1813/DIN: Wedge connector DIN 48834, Form A Suitable for connecting Rd 10 x FL30, FL30 x FL30 Quick installation with high contact force
Spacer
mm mm pcs kg/% pc
ST / FT
4
Connection material
Type Fit Length Pack. Weight
Item No.
Price /pc
10
1811 1811/L
250 400
31
1811: Spacer for professional laying of round conductors and specialist conductors according to DIN VDE 0185-305 (IEC 62305) DIN 48833 Suitable formounting round conductors Rd 10 or specialist conductors FL30 x 3.5
Expansion piece
Type Pack. pcs Weight kg/% pc
Item No.
Connection material
Price /pc
Al
Connection material
Price /pc
5
314
ST
/ FT
404
1805/...: For connecting different earthing systems With 2mounting holes 11mm 1805/2: With 4 attaching holes 1805/4: With 8 attaching holes 1805/6: With 12 attaching holes
240 TBS
With 2 hex-head screws M10 x 30 2 hexagonal nuts M10, 2 plain washers, hot-dipgalvanised steel and 2 serrated washers, stainless steel
245 325
60
50
55
10.5
40
1807
25 27,000 5016 14 2
55
12.5
110
Earthing systems
Earthing systems
Connection material
314
Price /pc
55
404
V4A
50
255 (5x51) 359
1805/...: For connecting different earthing systems With 2mounting holes 11mm 1805/2: With 4 attaching holes 1805/4: With 8 attaching holes 1805/6: With 12 attaching holes
Connection material
Type
Material Surface symbol finish
Cable bracket
Pack. pcs Weight kg/% pc
Item No.
Price /% pc
20
Zn
/ FT
27
113/BZ-FL Zn 113/BZ-HD-FL Zn
FT FT
100 100
113/BZ...: Conductor holder with over-piece With female thread M8 or through hole for wood screws For flat conductor FL30 Sliding over-piece for quick installation
58
20
Type
Fit mm
Pack. pcs
Weight kg/% pc
Item No.
Price /% pc
45.5
ST
/ FT
835
Rd 8/10/ FL30x3,5
1 12,100 5033 20 9
835: Conductor holder For round conductor Rd 8-10 and flat conductor FL30 x 3.5 Supplied with hex-head wood screw 6 x 70 and straddling dowel 910/N
30
18
Connection material
Type Fit mm
Dimension B
Spacer clip
Pack. pcs Weight kg/% pc
Item No.
Price /% pc
mm
ST
/ FT
831/30 831/40
54 65
25 25
831/..: For flat conductors Fit: FL30 and FL40 Withmounting hole 6.5 and 2 hex-head screws M6 x 16 (F)
Type
Fit mm
Dimension B
Pack. pcs
Weight kg/% pc
Item No.
Price /% pc
mm
ST
/ FT
831/30 M6 831/40 M6
54 65
25 25
Fit: FL30 and FL40 With attaching thread M6 and 2 2 hex-head screws M6 x 16 (F)
Type
Fit mm
Dimension B
Pack. pcs
Weight kg/% pc
Item No.
Price /% pc
mm
ST
/ FT
832/30 832/40
55 65
25 25
832/..: For flat conductors Fit: FL30 and FL40 Withmounting hole 7mm and 2 hex-head screws M6 x 16
TBS 241
Earthing systems
Earthing systems Spacer clip
Type Fit mm
Dimension B
Connection material
Pack. pcs Weight kg/% pc
Item No.
Price /% pc
60
mm
ST
/ FT
12.5
833
max. FL30
60
25
4,228 5033 03 9
833: For flat conductors Fit: FL30 Withmounting hole 6.2 x 22mm With 2 cylinder screws M6 x 16 and over-piece from hot-dipgalvanised steel Bottom section from polyamide, black
Type Fit mm
Dimension B
mm
pcs
kg/% pc
ST
/ FT
52
370/H
max. FL30
55
370/..: For flat conductors Fit: FL30 With spacer and cylinder screws M6 x 16 (G) With wood screw
55 6.5
Type
Fit mm
Dimension B
Pack. pcs
Weight kg/% pc
Item No.
Price /% pc
13
mm
ST
710/30 710/40
52 62
25 25
710/..: For flat conductors Fit: FL30 and FL40 With steel straddling dowel 10mm, spacer and 2 cylinder screws M5 x 14 (G)
B
10
36
20
15.5
Pack.
Weight
Item No.
Price /% pc
18
Type
Fit mm
Dimension B
Pack. pcs
Weight kg/% pc
Item No.
Price /% pc
mm
52
50
3,148 5030 02 1
708/..: For flat conductors Fit: FL30 and FL40 With 2 cylinder screws M5 x 12 (G) and over-piece With square pin
B 4.75
14
Weight kg/% pc
Item No.
Type
Fit mm
Dimension B
Pack. pcs
Price /% pc
52 52
50 50
708/..: For flat conductors Fit: FL30 and FL40 With 2 cylinder screws M5 x 12 (G) and over-piece With wood screw
6.5
14
Type
Material Surface For deep Dimen- Dimen- Pack. Weight earth symbol finish sion A sion B connection mm mm mm pcs kg/% pc
Item No.
Price /pc
ST
/ FT
2710/20 2710/25
St St
FT FT
20 25
84 89
114 119
2710/..: Attaching clip for earthing rod connnector ST, BP, OMEX and LightEarth systems On round conductor Rd 8-10 Including connector 5001/DIN
A B
242 TBS
Connection clip
Connection material
51.5
mm
ST
53.5
ST
30
14
40
20
Earthing systems
Earthing systems
Connection material
Type
Material Surface For deep Dimen- Dimenearth symbol finish sion A sion B connection mm mm mm
Connection clip
Pack. pcs Weight kg/% pc
Item No.
Price /pc
ST
/ FT
40
2730/20 2730/25
St St
FT FT
20 25 20
84 89 84
2730/20-VA V2A
5 35,900 5001 36 6
2730/..: Attaching clip for earthing rod connnector ST, BP, OMEX and LightEarth systems On flat conductors Including hex-head screw for attaching flat conductors
Type
11
Material Surface For deep Dimen- Dimenearth symbol finish sion A sion B connection mm mm mm
Pack. pcs
Weight kg/% pc
Item No.
Price /pc
Cu
30
2735/20 Cu Cu
20
80
114
5 24,900 5001 46 3
80 114
Fit mm
Pack. pcs
Weight kg/% pc
Item No.
Price /pc
ST
/ FT
2760/20 2760/25
FT FT
101 110
20 Rd 8-10/FL40 25 Rd 8-10/FL40
2760: Multi-purpose attaching clip for earthing rod connnector Suitable for attaching round conductors Rd 8-10 or flat conductors to FL40 With separator plate Installed with 2 hex-head screws M10 x 30 and 2 hexagonal nuts M10
Type
Material Surface Dimen- For deep earth symbol finish sion A connection mm mm
Fit mm
Pack. pcs
Weight kg/% pc
Item No.
Price /pc
V2A
2760/20-VA V2A
101
20 Rd 8-10/FL40
5 32,400 5001 61 7
2760: Multi-purpose attaching clip for earthing rod connnector Suitable for attaching round conductors Rd 8-10 or flat conductors to FL40 With separator plate Installed with 2 hex-head screws M10 x 30 and 2 hexagonal nuts M10
25
Type
Fit mm
Pack. pcs
Weight kg/% pc
Item No.
Price /pc
CuZn / Cu
2745/20 Ms CuZn Cu
20 7-12,5/S95 mm
5 16,000 5001 56 0
H
40
Price /pc
10 10
356: Plastic corrosion-proofing band Approx. 1.2mm thick Width: 50mm and/or 100mm, petroleum jelly with cotton fabric insert
TBS 243
Earthing systems
Earthing systems Plastic corrosion-proofing band
Type Width Length mm m Pack. pcs Weight kg/% pc
Item No.
357 357
50 100
10 10
357: Plastic corrosion-proofing band Approx. 1.3mm thick Width: 50mm and/or 100mm, bitumen with polyester support fabric
366 366
100 100
L = element length
366: For flat conductors Fit: FL30
Number plates
Type Fit mm
Material Pack. symbol
Price /% pc
pcs
Cu V2A Al
311/N-CU 311/N-VA
50 50 50 50 50 50
6,800 3049 30 2
V2A Al
311/N-ALU RD 16 / FL30
311/N-... Number plates To identify the point of separation to DIN 48821 Suitable for universal labelling (e.g. stamped numbers)
244 TBS
TBS 245