Anda di halaman 1dari 3

LubeCentral TM Hi-Flow

Oil & Coolant Fittings


Are your Oil & Coolant service times - s l o w - and
forcing DIRT into your valuable machinery fluids?
I f so, the range of Banlaw LubeCentral Hi-Flow TM

Oil & Coolant fittings may solve these common problems

Size 6 Size 4

Size 1 Size 3

• HIGHER FLOW CAPACITY: • SAFETY:


Fittings have been designed to handle higher All fittings incorporate Dry-Break Technology to
flowrates with reduced pressure drop. eliminate spillage

• FLUSH FACE: Higher safe working pressure.

Reduced ingress of contamination into fluids. Colour coded for quick easy indentification.
Simply wipe fittings prior to connection. Each set is unique and cannot be accidently
connected. Ensures “right fluid into right
• PUSH TO CONNECT: reservoir.”
No need to retract actuator collar All fittings incorporate Banlaw’s trademark ball-
during connection. lock latching system achieving a reliable higher
strength connection between nozzle & receiver.
• INCREASED DURABILITY:
Oil Fittings are manufactured from zinc plated steel, with anodised aluminium hose tails.
Coolant fittings are manufactured from corrosion resistant brass.

Hydrocarbon Management Specialists


B F
J

C D H E G

Nozzle Receiver
A

Nozzle & Receiver Connected

DIMENSIONS
Fitting Type A B ØC D E F G ØH J
BPLR1
91.5 64 46 * * 63 41 24 20
BPLN1

BPLR2
93.5 65 48 * * 66 46 25 21
BPLN2

BPLR3
97.0 68 50 * * 67.5 46 28 21
BPLN3

BPLR4
110.5 76.5 55 * * 75.5 50 31.5 21
BPLN4

BPLR5
115.5 80 58 * * 79 53 33 22
BPLN5

BPLR6
124.0 89.5 62 * * 79 56 37 22
BPLN6

THREAD CONFIGURATIONS - Receivers (Male) Nozzles (Female)


Size 1 Couplings available with 1/2” & 3/4” on Receiver and 3/4” & 1” on Nozzle
Sizes 2, 3, 4, & 5 Couplings available with 3/4” & 1” on Receiver and Nozzle
Size 6 Couplings available with 1” & 1-1/4” on Receiver and Nozzle

NPT THREADS SUPPLIED AS STANDARD, BSPT AVAILABLE ON REQUEST

PLEASE REFER TO PART NUMBER LEGEND FOR DETAILS

Hydrocarbon Management Specialists


600
A - 1/2”
Differential Pressure (kPa)

550
N - Nozzle B - 3/4”
500
R - Receiver C - 1”
450
D - 1-1/4”
400

3
ZE
SI
350

BPL # # # #
300
E4
250 SIZ

200
150 E6
B - BSPT
SIZ
Banlaw Pipeline N - NPT
100
LubeCentral
50
0 Size 1 to 6
25 50 75 100 125 150 175 200 225 250 275 300
For Receiver & Cap Assembly - Add Suffix “&C”
Flowrate (LPM) For Receiver Cap Alone - BPLR3C (example)
* DATA OBTAINED USING ISO68 HYDRAULIC OIL @ 40-45ºC. IMPORTANT: DIFFERENTIAL
PRESSURE WILL VARY HANDLING A FLUID WITH A DIFFERENT VISCOSITY.
DATA INDICATES FLUID FLOW FROM NOZZLE TO RECEIVER. RESULTS MAY VARY SLIGHTLY
Part Numbers
UNDER REVERSE FLOW.
TESTS CONDUCTED BY CCI ENGINEERING, NEWCASTLE, AUSTRALIA DURING APRIL 2004.

Pressure Ratings
Size 1 Size 2 Size 3 Size 4 Size 5 Size 6
N C N C N C N C N C N C
SWP MPa 6.5 6 10 8.75 6.75 8.75 6.5 7 7 5 5 4.5
psi 943 870 1450 1269 979 1269 943 1015 1015 725 725 653

BP MPa 26 24 40 35 27 35 26 28 28 20 20 18
psi 3771 3481 5801 5076 3916 5076 3771 4061 4061 2901 2901 2611
LEGEND:
SWP - Safe Working Pressure (Maximum Recommended Working Pressure)
BP - Burst Pressure (Minimum Pressure at which Failure Will Occur)
N - Nozzle
C - Nozzle & Receiver Coupled

FLUIDS:
The Size 1 couplings are manufactured from Brass and are suitable for compatible coolants and water.
The Size 2, 3, 4, 5, & 6 couplings are manufactured from zinc plated steel and anodised aluminium and
are suitable for use with common lubricants and fuels.

SEALS:
All couplings are fitted with Viton and HNBR seal compounds. If in doubt, please verify seal compatibility
with fluid prior to use.

FURTHER INFORMATION:
Further information on these couplings or any other Banlaw product is available from your nearest
accredited Banlaw Distributor, or from Banlaw direct.

Call your Authorised Banlaw Pipeline Distributor:


Call for a full consultation
Banlaw Pipeline Pty. Ltd.
17 Strathmore Road
Caves Beach NSW 2281
Australia
Telephone +61 (0)2 49724777
Fax. +61 (0)2 49714910
Website: www.banlaw.com
Email: sales@banlaw.com.au Please Note: Use only Banlaw factory replacement parts.
ABN 88 062 044 071 Non-genuine parts may cause equipment failure or malfunction,
© Banlaw Pipeline 2006 and invalidate factory warranty.

Hydrocarbon Management Specialists 06/06 FFB02

Anda mungkin juga menyukai