Time
Time
under 15 minutes
under 30 minutes
under 60 minutes
over 60 minutes
under 15 minutes
under 30 minutes
under 60 minutes
EXPRESS INSTALLATION
over 60 minutes Hi Speed
under 15 minutes
under 30 minutes
under 60 minutes
over 60 minutes
PCI CARD
Hand Tools
Hand Tools
under 30 minutes
Skills - Moderate
Hardware Hi Speed
Hand Tools
Hardware
EXPRESS INSTALLATION
STEP 3
Hi Speed
Hand Tools
Hand Tools
under 30 minutes
Skills - Easy
Hardware Skill Level
under 60 minutes
over 60 minutes
Router
Router
Skill Level
Hi Speed
easy
Router
Intermediate
advanced
Router
easy
Intermediate
advanced
easy
Intermediate
advanced
CONTINUED
You will be asked to select a drive for storage, and to set the storage size.
Note: If you set more than 90% of your hard drive to be allocated to the QLR460 storage, your computer may read the drive as being full, as this hard drive space is being saved for the program.
Hardware Installation
Skill Level
NOTE: Please turn off the computers power and unplug the power cord prior to installing the QLR Capture Card. If you are unfamiliar with installing PC hardware, it is recommended to have a PC technician perform the installation.
easy Intermediate advanced
Before you install a camera, carefully plan where and how you will position the camera, and where you will route the cables. NOTE: The 4 Port PCI card has 4 Video inputs, allowing you to connect up to 4 cameras (the instructions below apply to the cameras included with QLR464). You may connect your own cameras, however please make sure to use a proper power adaptor NOT EXCEEDING 12V DC for each camera.
easy
Camera Installation
Skill Level
TIP Make sure your cameras are fully functional before mounting them in the final location.
7 2
Follow the auto-run instructions on screen. Click on the Run SetupDisc.exe option if prompted.
If your system does not support auto-run, you can browse the CD, and search for the Vista Pro 6 Server in the X:\Package\Remote Client directory, where X is your CD/DVD drive.
It is recommended that you remove the installation CD and then restart your computer before running the VistaPro 6 Server Software.
Plug the cameras power connector into the power connector end of the extension cable.
Click the DVR shortcut on your desktop , or locate the application in the start menu. If a Windows Firewall warning pops up, select the Unblock option. Click the Lock Button . The Logon window appears.
The installation screen will open. Click on the Install button and then click the Express installation button.
Note: A pop-up window may appear asking you to verify the software. Click the button to allow the installation.
32 & 64-bit
Compatible
Note: 16 Channel QLR1670 includes a 16-in-1 BNC multi-channel cable. For more information on the QLR1670 please refer to the User Manual.
64 bit Vista/7 users: A Windows Security window appears during setup. Select the checkbox beside Always trust software from Cap Co. Click the Install button to continue.
10
Under ID, enter admin; under Password, enter 1111. Click the checkmark button to log in.
NOTE: Click the Virtual Keyboard button to type in the User ID and Password if you do not have access to a keyboard. NOTE: It is recommended to change the default password. For details on changing the admin password, see Changing User Account Password on page 34. NOTE: Click the Exit button on the bottom right hand corner of the window to exit the program.
Secure the PCI Card by tightening the screw with a screw driver.
The installation window will pop up. Follow the instructions by clicking the Next buttons after making your selections. You will be asked to set the installation location, language and program folder.
Once installed, you will be asked to select whether you want the program to start automatically or manually.
Note: It is recommended that you select automatically. This ensures that your DVR is always ready to record, even after restarting your computer.
Congratulations!
You have completed Step 1 successfully. Your computer can now support up to 4 cameras.
For QLR464, you are required to use the included power adaptor. Use of a non-regulated, nonconforming power adaptor can WARNING damage the cameras and will void the warranty.
ENGLISH REVISION # R2
You have successfully installed the VistaPro 6 Server software. You can now view, record and playback video on your local computer.
Congratulations!
LOREX EASY CONNECT INTERNET REMOTE MONITORING ADVANCED (AUTO PORT FORWARD
under 15 minutes under 30 minutes
under 30 minutes
under 60 minutes
over 60 minutes
under 60 minutes
WIZARD)
Hand Tools
Hardware
Hi Speed
under 15 minutes
under 30 minutes
under 60 minutes
over 60 minutes
Time
Hand Tools
Hardware
Hi Speed
Hand Tools
Hardware
Router
STEP 4
Router
under 60 minutes
Skills - Advanced
over 60 minutes Hi Speed
STEP 6
STEP 6
Intermediate advanced
under 15 minutes
under 30 minutes
under 60 minutes
under 15 minutes
under 30 minutes
easy
advanced
under 15 minutes
under 30 minutes
advanced
CONTINUED
Hardware
Hi Speed
Hardware
Hi Speed
Hardware
Hi Speed
The Lorex Auto Port Forwarding Wizard is a software that automates router port forwarding.
Router Skill Level
easy
Intermediate
advanced
You must have the following before you configure the software: 1. Your routers model and version numbers 2. Your routers user name and password 3. Your Lorex devices IP address 4. Your Lorex devices port numbers that require port forwarding
easy Intermediate advanced
If you were unable to use the Auto Port Forward Wizard, then you will need to do so manually. Please skip this step if the Wizard was successful. A router configuration guide featuring the most commonly used routers in the market is available on www.lorextechnology.com/support in the Consumers Guide Section.
easy Intermediate advanced
Router
Complete new account information 1. FOR PRODUCT LICENSE select 4 the QLR460 Series option from the
drop down menu. 2. FOR PRODUCT CODE enter your computers physical address. 3. FOR URL REQUEST enter a unique URL name (e.g. tomsmith)
Click on the SITE button at the top left of the software screen.
1
1 3
Skill Level
On a remote computer, insert the installation disc into the CD/DVD reader.
Skill Level
2 Installation
1. Insert the systems software CD, select the Lorex Easy Connect Internet Setup Wizard and follow the instructions to register, download and launch the Wizard.
Port forwarding allows your computer to communicate with the remote computers connecting to it. Please consult your routers owners manual on port-forwarding instructions. You must port forward the following ports on your router: 6880 (Web Port) 6808 (Playback Port) 6807 (Live Port)
easy Intermediate advanced
easy
Intermediate
advanced
Registration E-mail 5
An automated REGISTRATION CONFIRMATION EMAIL will be sent to your email. Print and Save this confirmation. You will need this information to access your System remotely. Follow the steps outlined in the e-mail before proceeding to step 5.6. NOTE: Please wait 10-15 minutes before logging in for the first time.
Follow the auto-run instructions on screen. Click on the Run SetupDisc.exe option if prompted.
If your system does not support auto-run, you can browse the CD, and search for the Vista Pro 6 Server in the X:\Package\Remote Client directory, where X is your CD/DVD drive.
10
EXAMPLE
QLR460
6800 6900 12
EXAMPLE:
Retrieve system information to register DDNS, make a note 1 In ordercomputers for Lorex ID (MACyou need toClick on Start of your Physical address).
DDNS Server: ddns.lorexddns.net (already added) Domain Name: tomsmith User ID: tomsmith1 Password: (your password)
1. Under the Router drop-down list, select the model of your router OR click the Search button to enter the name of your router 6880 model. If your IP address does not appear 6807 automatically, click the button and write down your IP, then enter into the box 6808 highlighted to the right. NOTE: Ensure you select the proper model and firmware number of the router. NOTE: Click the Auto Detect button if you have a Linksys or Netgear router (works with most models). 2. Under Router IP, click the Detect Router IP button. The routers IP populates in the blank field. 3. Under Username and Password, enter the routers username and password. 4. Under IP, enter the IP address of your Lorex device. 5. Under Port, enter the port number(s) that require forwarding (6880, 6807 and 6808). 6. Click Next to continue. 1. Click the Update Router button. The program begins updating the router settings. This may take 20 - 30 seconds. 2. Close the update window when the update finishes. NOTE: You may have to manually save your router settings after the software makes the required changes to your router.
(located and the left side of your monitor screen) and type cmd in the search field (on older versions of Windows, click Start, then click Run and then type cmd). Type ipconfig /all and make a note of your computers Physical Address (e.g. 001D09C4D5C8).
The installation screen will open. Click on the Install button and then click the Advanced installation button.
Name: set a name for the site (e.g. office) IP/DDNS: enter the DDNS address created in Step 5-5 (ie. tomsmith.lorexddns.net) Video Port Numbers: must be set to 6807 ID: (default ID is admin) Password: (default password is 1111)
Note: If you are connecting from a remote computer within the local area network of the installed server (i.e. not over the internet) you can simply enter the IP address of the server recorded in step 5-1. from the left menu 11 Drag the site name viewing window. and drop it into the
Congratulations!
You have successfully installed the VistaPro 6 Client software. You can now view your cameras from a remote location.
Enter your DDNS address Enter your DDNS user ID Enter your DDNS password
. :
. :
. :
DDNS set-up 2 Open your web browser (Internet Explorer by default) and enter
http://www.lorexddns.net
Under Domain name, enter the SUBDOMAIN of your Lorex DDNS address (ie. if your domain name is tomsmith.lorexddns.net, only enter tomsmith into the ID field) Under User ID, enter in your user ID of the Lorex DDNS account.
The installation window will pop up. Follow the instructions by clicking the Next buttons after making your selections. You will be asked to set the installation location, language and program folder. Click Finish. NOTE: You may now close the VistaPro 6 Installation window. VistaPro 6 Client software is now installed. Double-click the icon on your desktop to run the program. In the Login window, enter your username and password and select Log In.
admin 1111
9 Create account
ID PASSWORD 1111
7 10 account.
Create Account
ADMIN
NOTE: Ensure that Internet Explorer is your systems default internet browser.
11
Note: The default login information is: ID: admin Password: 1111
Click Temporarily Allow Pop-ups to continue NOTE: If asked to run ActiveX, click yes or allow. NOTE: For full details on connecting to your system using Internet Explorer, please refer to the Users Manual.