GE Lighting
e GE Lighting
e
Lighting Fixtures
GE Lighting
Lighting Fixtures
09/2000 English
e and General Electric are both registered trademarks of the General Electric Company, USA
Lighting Fixtures catalogue Bulgaria
GE Hungary Rt.
Representative Office
Romania
GE Romania SRL
Besta Center
Kv. Krasno Selo Str. Constantin Apostol nr. 10, etaj 4,
ul. Debar Bl. 10 VH.A./IV. Sector 6
1680 Sofia Bucuresti
Tel: (359) 2 59 63 22 Tel: (40) 1 413 3328 2247
Fax: (359) 2 59 63 22 Fax: (40) 1 413 5386
CIS Slovakia
GE Hungary Rt. GE Hungary Rt.
Representative Office Representative Office
GE Lighting can offer proper Kosmodamianskaya nab. 52 Prievozska 14/A
answers for all lighting issues. Building 1, 6th Floor 82109 Bratislava
Moscow 113054, Russia Tel: (421) 7 5823 8185
Our environment needs not Tel: (7) 095 935 7281 Fax: (421) 7 5823 8186
only good but efficient Fax: (7) 095 935 7279
Slovenia
lighting, as well. Croatia GE Adria d.o.o.
Through using our products, GE Hungary Rt. Dunajska 22
Representative Office 1511 Ljubljana
you can get the real solution Marticeva 73 Tel: (386) 61 474 4562
for your all requirements 1000 Zagreb Fax: (386) 61 431 6216
Tel: (386) 61 474 4562 info@geadria.si
relating to illumination and in Fax: (386) 61 431 6216
addition, your costs will info@geadria.si Ukraine
General Electric Co.
decrease considerably. 42/14 Shelkovichnaya str.
GE Lighting Plant Czech Republic
GE Lighting, s.r.o. Kiev 252003
Cavazzale (Vicenza) – Italy
Jihlavská 2 Tel: (38) 044 490 6983
GE Lighting is constantly 664 41 Brno-Troubsko Fax: (38) 044 490 6982
developing and improving its Tel: (420) 5 472 27951
Fax: (420) 5 472 27955 Yugoslavia
products. For this reason, all GE Hungary Rt.
product description in this Estonia, Latvia, Lithuania Representative Office
GE Hungary Rt. Kolarceva 7
catalogue are intended as a Representative Office in the Baltic States 11000 Beograd
general guide, and we may Elizabetes 2 Tel: (381) 11 324 8239
LV 1340 Riga, Estonia Fax: (381) 11 324 8432
change some specifications Tel: (371) 7 321 710
from time to time in the Fax: (371) 7 321762
interest of product Hungary
improvement. GE Hungary Rt.
Váci út 77.
H-1340 Budapest
By presenting this detailed Tel: (36) 1 399 1100
information about GE lighting Fax: (36) 1 399 1672
GE Lighting Plant
fixtures, our aim is to help our Coslada (Madrid) – Spain Kazakhstan
customers to arrange the GE Hungary Rt.
Representative Office
illumination of their 153 Abaya Avenue, ap. 14
environments in the best way. 480024 Almaty
Tel: (7) 3272 509 833
If you have any further Fax: (7) 3272 400 558
question, please contact our Macedonia
local representative in your GE Hungary Rt.
region on phone number in Representative Office
Belasica BB
the back cover of this Skopskie Saem
catalogue. 81000 Skopje
Tel: (389) 70 217 649
Fax: (389) 91 386 125
Poland
General Electric Co. Polska Sp.z.o.o.
ul. Szwolezerów 10
GE Lighting Plant 00-464 Warsaw
Hendersonville, North Carolina – USA Tel: (48) 22 8415 201 • GE Lighting is constantly developing and
Fax: (48) 22 8419 365 improving its products. For this reason, all
product description in this catalogue are
GE Lighting intended as a general guide, and we may change
some specifications from time to time in the
Web Site interests of product improvement.
• Technical drawings in this catalogue are not to
scale.
www.GELighting.com • Dimensions are expressed in mm.
GENERAL ELECTRIC
offers the expertise, knowledge and support of
one of the most successful companies in the
world, helping you to expand your business
General Electric is a global business. Established over 100 years ago, GE is the only company listed in the
DOW JONES INDUSTRIAL INDEX today that was included in the original index of 1896, too.
General Electric is a more than $100 billion company with a market valuation of more than $300 billion.
General Electric operates in more than 100 countries, with 250 manufacturing plants and more than
270,000 employees. General Electric is committed to achieving worldwide leadership in each of the 12
businesses that it operates. General Electric is committed to providing the highest quality and the most
advanced products, spending more than $2 billion annually on R&D.
With its 12 businesses, General Electric operates all over the world; one of them is GE Lighting. As one
of the world’s biggest light source manufacturers, GE provides high quality products and services its
customers.
g GE Lighting 1
GE Lighting World-wide
offers over 20,000 different high quality
and high technology products
Leading worldwide company – GE Lighting is one of the largest manufacturers of light sources in the
world.
Product innovation – GE owns over 1,700 patents worldwide for lighting technologies and manufacturing
processes.
It is a value of GE that make a real difference to the quality of the relationship between us and our
partners and customers.
Commitment
In every market where we operate we become a key player through internal investment, strategic alliances
and acquisitions – four our customers this means the most innovative products and the most effective
support.
Excellence
We continue to establish “Centres of Excellence” for lamp and luminaire manufacturing, engineering and
technological development – delivering advanced products of the highest quality.
Innovation
We have an unbroken record of innovation in lamp technology – which enables us to provide customers
with high performance, cost-efficient lighting solutions.
Quality
GE Lighting is constantly driving up standards in lamp and luminaire manufacturing, improving
reliability for users and reducing maintenance costs.
g GE Lighting 2
EUROPIC
Up-to-date computer lighting program
enabling you to design optimal lighting for
any environment
EUROPIC is an innovative software package for lighting
calculations for any interior, exterior or roadway areas.
It can operate in Windows 95 or NT environments and is
available on CD-ROM. For displayingand printing, 7 languages
(English, French, German, Hungarian, Italian, Portuguese and
Spanish) can be chosen. It enables the calculations to be made quickly,
exactly and easily. Tutorial and on-line Help belong to the
program. The CD contains an Instruction Manual, which can be
printed out at any time. As a part of the program, the Photometry Management
and the Fundamental Information about Lighting will prove to be useful tools
during the work.
The program can be used for any irregular shape and size rooms/areas, and at the same time in a
library, solutions for rooms with regular and pre-determined shapes, sizes and ceiling structures can be
found. All this enable you to design the lighting of any environment absolute freely and easily without
approximation and composition techniques should be used which are common in case of traditional
lighting design programs. When the calculation is complete, the results can be displayed in illuminace
tables and relative graphs (isolux curves, spot and 3D diagrams). For simplifying the evaluation of the lit
area, the tables showing different values can be displayed in several adjacent windows on the screen.
All design related results can not only be displayed on the screen but printed out, as well, illustrating
them by 2 and 3 dimensional drawings. A library including a wide range of furniture can make it possible
to reproduce the designs in a more realistic way by showing the shadows of tables, chairs, book cases,
stairs, stands, trees, etc.
Beyond displaying the lighting engineering design, EUROPIC can also produce a captivating photo-like
picture showing the final image with installed luminaires together. In this way, a picture can be
prepared about the real arrangement of the room to be lit.
Lighting designs
g GE Lighting 3
QUALITY AND TECHNOLOGY
High quality processes and up-to-date
technologies to ensure optimal results
g GE Lighting 4
CERTIFICATES
Products and processes
complying the highest
quality standards
ENEC Certificate
Lighting equipment and their parts holding ENEC
(European Norms Electrical Certification) mark can be
freely marketed in whole Europe. The ENEC mark has
been created on the basis of an agreement of 18
European institutes approved by the Cenelec Mark
Committee) and verifies that the product in question
complies with the EN Standards. The ENEC mark is
accepted by all countries involved in this agreement as
an equivalent one to that of their similar local marking.
In Italy, IMQ is authorised to give ENEC Certification,
which is completed with an additional 03 mark. This
means that an Italian institute issued this Certificate.
The ENEC Process covers the qualification of the
manufacturer (which must have UNI EN ISO 9002
Quality Certification), the approval the product in
question and the inspection of the production.
The main advantage of this process is that only one
certificate has to be obtained instead of several local
ones which makes possible the export activities to
become more dynamic and to sell products in 18
different markets by possessing only one mark.
g GE Lighting 5
MAR MAS MAX MAC
page 9 page 10 page 11 page 12
Optical Series 5500 Series 5501 Series 5502 Series 5503 Series 5504 Series 5506 NUPLEX
Accessories page 31 page 32 page 33 page 34 page 35 page 36 page 38
page 30
CONTENTS
INDUSTRIAL LFL LIGHTING
SYSTEMS
ENERGY SAVING
LIGHTING
POCKET 11 TOP/2DR TOP/DBX Series 5503 2D GREENPHOS GENUSPOT
page 73 pages 74 page 75 page 77 page 78 page 79
DISPLAY LIGHTING
FLOODLIGHTING
STREET LIGHTING
INFORMATION
g GE Lighting 7
Complete range of ceiling luminaires
with IP 65 protection
The complete range enables to choose the optimal
product suitable for installation environment and
lighting requirements.
MAX
Stainless steel body
Smooth glass or polycarbonate cover
Semiconcentrated beam
MAS
Polycarbonate body
Smooth polycarbonate cover
Concentrated beam
MAR
Polycarbonate body
Polycarbonate cover with prismatic reeding
Diffuse beam
MAC
Fibreglass-reinforced polyester body
Fluorescent lamp protected by polycarbonate cover
Aluminium reflectors
Diffuse beam
Concentrated beam with MAC/R reflector
RAPIDKIT
Accessory for mounting on ceiling
Pendant rings
(photo of MAR)
g GE Lighting 8
MARINER - MAR/P series
Waterproof ceiling fittings for T8 fluorescent lamps, for total protection against the
penetration of foreign objects, water jets from any direction and accidental shocks.
Flame and combustion resistance in compliance with IEC 34.21 EN 60598-1,
totally self-extinguishing V2.
Ideal for installation in humid and/or dusty areas.
Perfect for AD-FT ambients with inflammability temperature > 150°C.
Body: shatterproof Lexan® polycarbonate (resisting shocks above 500 J/sqm according
105 165 Length Fixing Holes to ASTM 256), grey RAL 7035, self-extinguishing V2; features polyurethane foam seals
Type L (mm) D (mm) applied without the use of Freon.
105 105 Cover: transparent shatterproof self-extinguishing V2 Lexan® polycarbonate, injection
MAR/P 118 660 390 moulded anti-ageing UV-stabilised, with high-luminous efficacy linear prismatic reeding
D MAR/P 136 1270 900 on the inside. Completely smooth on the outside for easy cleaning.
MAR/P 158 1570 900 Clips: fibreglass-reinforced nylon, with self-retaining hinged stainless steel joints.
MAR/P 218 660 390 Supplied also with steel screws for tamper-proof fitting. Stainless steel clips are
MAR/P 236 1270 900 available on request.
L
MAR/P 258 1570 900
Reflector: bonderised shaped sheet steel with high-reflection white stoved epoxy-
polyester powder paint finish. Wiring is mounted to it. Remains attached to the fitting by
90°
suspension cords during maintenance.
MAR/P 136 MAR/P 236
90°
C
180°
0°
180° Control gear and electric circuit: 230V 50Hz; wired with heat-resistant (HT 90°C), fire-
180.0° 0.0° C 0°
90.0° 270.0°
270°
180.0°
90.0°
0.0°
270.0°
retardant cable in compliance with IEC 20-22/II, with explosion-proof capacitor, with
270°
105
γ° 180 150 135 120
105
γ° 180 150 135 120 built-in discharge resistor, with power factor correction; terminal block with sectioning
105 105
fuse and cable grommet for wires up to 2.5 mm2.
90 90
90 90 Max. exterior surface temperature of casing:
40
40
75 75
75 75
Tfn standard operation Class of Temperature *
80
80
MAR/P 136/236 H 90°C T4
60 120 60
60 120 60
MAR/P 158/258 H 100°C T4
160
160
(*) According to Standard IEC 31-8 (in event of failure): T1 = 450°C; T2 = 300°C; T3 = 200°C; T4 = 135°C; T5 = 100°C; T6 = 85°C
cd/klm
30 15 0 15 30
30 15 0 15 30
cd/klm
Standard accessories: fittings supplied with D 21 mm gasket, cable grommet PG 13.5
ULOR 8,6% DLOR 69,8% LOR 78,4%
ULOR 5,7% DLOR 64,2% LOR 69,9% and two nylon suspension rings.
Installation: 1) Ceiling mount with gasket or with RAPIDKIT accessory. 2) Pendant with
rings enclosed. 3) On NAL trunking system with NAL 1023 accessory.
N° and Lamp Weight Pack Qty. Product N° and Lamp Weight Pack Qty. Product
Type Type Version (kg) Box Pallet Code Type Type Version (kg) Box Pallet Code
185
Waterproof ceiling fittings for T8 fluorescent lamps, for total protection against the
144
penetration of foreign objects, water jets from any direction and accidental shocks.
Flame and combustion resistance in compliance with IEC 34.21 EN 60598-1, totally
D
Length Fixing Hole self-extinguishing V2.
Type L (mm) D (mm) Ideal for installation in humid and/or dusty areas.
Perfect for AD-FT ambients with inflammability temperature > 150°C.
MAS/P 158 1570 1200
L
Body: shatterproof Lexan® polycarbonate (resisting shocks above 500 J/sqm according to
MAS/P 258 1570 1200 ASTM 256), grey RAL 7035, self-extinguishing V2; features polyurethane foam seals applied
MAS/P158
90°
MAS/P158AL
90° without the use of Freon.
180°
180.0°
C
0.0°
0°
180.0°
C
0.0°
180°
0° Cover: transparent shatterproof self-extinguishing V2 Lexan® polycarbonate, injection
90.0° 270.0°
270° 90.0° 270.0°
270° moulded anti-ageing UV-stabilised. Completely smooth on the outside for easy cleaning.
γ° 180 150 135 120 γ° 180 150 135 120
105 105 105 105 Clips: fibreglass-reinforced nylon, with self-retaining hinged stainless steel joints. Supplied
90 90
also with steel screws for tamper-proof fitting. Stainless steel clips are available on
90 90
75 125
request.
75
150
75 75
250
75
Reflector: bonderised shaped sheet steel with high-reflection white stoved epoxy-polyester
60 225 60 375
powder paint finish, or highly polished aluminium with parabolic profile of concentrated
60 60
300
beam (Al). Remains attached to the fitting by suspension cords during maintenance.
500
cd/klm cd/klm
Control gear and electric circuit: 230V 50Hz wired with heat-resistant (HT 90°C); fire-
ULOR 1,2%
30 15
DLOR 80,5%
0 15 30
LOR 81,7%
30 15 0 15 30
retardant cable in compliance with IEC 20-22/II, with explosion-proof capacitor, with built-in
ULOR 1,0% DLOR 81,9% LOR 82,9%
discharge resistor, with power factor correction; terminal block with switching fuse and
MAS/P258 180°
90°
MAS/P258AL
90°
cable grommet for wires up to 2.5 mm2.
180°
180.0°
C
0.0°
0°
180.0°
C
0.0°
0°
Max. exterior surface temperature of casing:
90.0° 270.0° 90.0° 270.0°
270° 270°
γ° 180 150 135 120 γ° 180 150 135 120
Tfn standard operation Class of Temperature *
105 105 105 105
Standard version 95°C T4
90 90 90 90 Version EB 75°C T6
75 75 Version EES 95°C T4
75 75 75 75
150 150 (*) According to Standard IEC 31-8 (in event of failure): T1 = 450°C; T2 = 300°C; T3 = 200°C; T4 = 135°C; T5 = 100°C; T6 = 85°C
60 225 60 60 225 60
300 300
Standard accessories: fittings supplied with D 21mm gasket, cable grommet PG 13.5 and
cd/klm cd/klm
two nylon suspension rings.
30 15 0 15 30 30 15 0 15 30
ULOR 1,0% DLOR 70,5% LOR 71,5% ULOR 1,0% DLOR 71,7% LOR 72,7%
Installation: 1) Ceiling mount with gasket or with RAPIDKIT accessory. 2) Pendant with
rings enclosed. 3) On NAL trunking system with NAL 1023 accessory.
N° and Lamp Weight Pack Qty. Product N° and Lamp Weight Pack Qty. Product
Type Type Version (kg) Box Pallet Code Type Type Version (kg) Box Pallet Code
Waterproof ceiling fittings for T8 fluorescent lamps, for total protection against the
185 penetration of foreign objects, water jets from any direction and accidental shocks.
97 Perfect for AD-FT ambients with inflammability temperature > 150°C.
MAX/V
Body: pressed from one piece of steel INOX AISI 304, with extremely high mechanic
resistance.
D
Cover:
MAX/V: 4mm thick tempered glass with high chemical and mechanical resistance fitted
in stainless steel frame.
L
MAX/P: transparent shatterproof self-extinguishing V2 Lexan® polycarbonate, injection
185
moulded anti-ageing UV-stabilised. Completely smooth on the outside for easy cleaning.
MAX/P
97 120 Clips: stainless steel with self-retaining hinged joints.
Reflector: polished aluminium with high optical performance.
Length Fixing Holes
D Control gear and electric circuit: 230V 50Hz wired with heat-resistant (HT 90°C); fire-
Type L (mm) D (mm)
retardant cable. Explosion-proof capacitor, with built-in discharge resistor, with power
MAX 158 1570 1200 factor correction; terminal block with switching fuse and cable grommet for wires up to
MAX 258 1570 1200 L 2.5 mm2.
Max. exterior surface temperature of casing:
90° 90°
Class of Temperature *
MAX/V 158 MAX/P 158
C
180°
0° C
180°
0°
Standard version T4
180.0° 0.0° 180.0° 0.0°
90.0° 270.0°
270°
90.0° 270.0°
270°
Version EB T6
γ° 180 150 135 120 γ° 180 150 135 120
Version EES T4
105 105 105 105
(*) According to Standard IEC 31-8 (in event of failure) T1 = 450°C; T2 = 300°C; T3 = 200°C; T4 = 135°C; T5 = 100°C; T6 = 85°C
90 90 90 90
75 50
Standard accessories: fittings supplied with cable grommet PG 13.5 and two steel
75
150
75 75
100
75
suspension rings.
225 150
Installation: 1) Ceiling mount with gasket enclosed. 2) Pendant with rings enclosed.
60 60 60 60
cd/klm cd/klm
30 15 0 15 30 30 15 0 15 30
ULOR 1,4% DLOR 71,3% LOR 72,7% ULOR 2,4% DLOR 75,6% LOR 78%
90° 90°
MAX/V 258 MAX/P 258
180° 180°
C
180.0°
C
0.0°
0°
180.0° 0.0°
0°
N° and Lamp Weight Pack Qty. Product
90.0° 270.0° 90.0° 270.0°
90 90 90 90
MAX Class: I IP 65
50 50 230V 50Hz Class of Temperature: T4
75 75 75 75
100 100
MAX/V 158 H 1 x F58 T8 HPF - FUS 9,00 1 28 37197
150
60 150 60 60 60
MAX/V 258 H 2 x F58 T8 HPF - FUS 10,50 1 28 37198
200 200
MAX/P 158 H 1 x F58 T8 HPF - FUS 5,80 1 28 37190
cd/klm cd/klm
30 15 0 15 30 30 15 0 15 30
MAX/P 258 H 2 x F58 T8 HPF - FUS 7,00 1 28 37191
ULOR 1,2% DLOR 64% LOR 65,2% ULOR 1,8% DLOR 64,6% LOR 66,4%
Without lamp.
N° and Lamp Weight Pack Qty. Product N° and Lamp Weight Pack Qty. Product
Type Type Version (kg) Box Pallet Code Type Type Version (kg) Box Pallet Code
Waterproof luminaires for T8 tubular fluorescent lamps offering total protection against the
entry of foreign objects, jets of waters from any direction and accidental contact (Class II).
Flame and combustion resistant in compliance with IEC 34.21 EN 60598-1.
Suitable for installation in damp and/or dusty environments as well as for exterior use.
The luminaires are supplied with Ø 38 mm polycarbonate protective tube and VIT 2 starter
61 125 Length Fixing Holes
(FS 2 for MAC 218 version).
Type L (mm) D (mm)
Body and cover: fibreglass reinforced polyester.
125 125
MAC 118 645 500 Lampholder: self-extinguishing polycarbonate for T8 tubular fluorescent lamps, complete
D MAC 136 1265 800 with ring nuts, lampholders clip fit over a seal in cover tube seating.
MAC 158 1565 1100
Control gear and electric circuit: wired for 230V 50Hz using cables with silicone
insulation, power factor correction using explosion-proof capacitor with built-in discharge
MAC 218 645 500
resistor; terminal block with 2.5 mm2 clamping screws; VIT 2 safety starter for automatic
L MAC 236 1265 800
cut-out of burned out or faulty lamps (FS 2 starter for MAC 218 version). Starters are
MAC 258 1565 1100 accessible from outside the luminaire by removing the starter compartment cap in cover.
Max. exterior surface temperature of casing:
Class of Temperature *
130 130 Standard version T4
Version EB T6
Version EES T4
170 235
(*) According to Standard IEC 31-8 (in event of failure) T1 = 450°C; T2 = 300°C; T3 = 200°C; T4 = 135°C; T5 = 100°C; T6 = 85°C
Standard accessories: luminaires are supplied complete with gasket D 21 mm, cable
geomet PG 13.5 and two nylon suspension rings.
Installation: 1) Ceiling mount with gasket or with RAPIDKIT accessory. 2) Pendant with
rings enclosed. 3) On NAL trunking system with NAL 1023 accessory.
105
180 150 135 120
105 105
180 150 135 120
105
also installed.
MAC/R AL – polished aluminium reflector fixed to the body by stainless steel spring,
90 90 90 90
enclosed.
75 75
75 75 75 75
150 150
60 225 60 60 225 60
300 300
cd/klm cd/klm
30 15 0 15 30 30 15 0 15 30
N° and Lamp Weight Pack Qty. Product With Length Weight Pack Qty. Product
Type Type Version (kg) Box Pallet Code Type Luminaire L (mm) (kg) Box Code
g GE Lighting 12
Note the resistance to chemical agents in construction materials.
• HPF = with power factor correction
MARINER Accessories
Accessories for quick installation of Mariner (MAR, MAS) luminaires on ceiling.
The kit contains two clips.
RAPIDKIT – 2 clips
MAS
MAX
g GE Lighting 13
Photometric data
MAR/P 136 MAS/P 158 AL
POLAR DIAGRAM NORMAL EFFICIENCY POLAR DIAGRAM NORMAL EFFICIENCY
OF OUTPUT ULOR 0.086 DLOR 0.698 LOR 0.784 OF OUTPUT ULOR 0.010 DLOR 0.819 LOR 0.829
(cd/1000 lm) CIE FLUX CODE (cd/1000 lm) CIE FLUX CODE
90° 90°
CIE FLUX CODE 32 60 82 88 78 CIE FLUX CODE 60 88 97 98 82
C 180° C 180°
180.0° 0.0° 180.0° 0.0°
0° SPACING – HEIGHT RATIO 0° SPACING – HEIGHT RATIO
90.0° 270.0° 90.0° 270.0°
SHR NOM 1.75 SHR MAX 1.94 SHR MAX TR 2.58 SHR NOM 0,75 SHR MAX 0,87 SHR MAX TR 0,81
270° 270°
γ°
UTILISATION FACTOR – UF (Floor) γ°
UTILISATION FACTOR – UF (Floor)
REFLECTION FACTOR ROOM INDEX 120 135 150 180
REFLECTION FACTOR ROOM INDEX
120 135 150 180
Ceiling Walls Floor 1.00 1.50 2.00 3.00 4.00 5.00 Ceiling Walls Floor 1.00 1.50 2.00 3.00 4.00 5.00
105 105
0.70 0.50 0.10 0.430 0.514 0.566 0.627 0.662 0.686 0.70 0.50 0.10 0.575 0.666 0.716 0.770 0.798 0.815
0.30 0.368 0.457 0.513 0.582 0.624 0.652 0.30 0.524 0.623 0.679 0.742 0.778 0.796
0.10 0.321 0.410 0.469 0.543 0.589 0.621 0.10 0.485 0.588 0.648 0.717 0.754 0.777
90 90
0.50 0.50 0.10 0.407 0.487 0.535 0.593 0.627 0.650 0.50 0.50 0.10 0.562 0.651 0.699 0.752 0.779 0.795
40
0.30 0.353 0.437 0.490 0.555 0.595 0.622 125 0.30 0.517 0.613 0.668 0.727 0.759 0.779
0.10 0.311 0.396 0.451 0.522 0.566 0.595 75 0.10 0.481 0.582 0.640 0.706 0.741 0.764
75
0.30 0.50 0.10 0.385 0.460 0.506 0.565 0.595 0.617 250
0.30 0.50 0.10 0.550 0.636 0.683 0.735 0.761 0.777
80
0.30 0.338 0.417 0.468 0.530 0.568 0.593 0.30 0.509 0.603 0.656 0.714 0.745 0.763
0.10 0.301 0.382 0.434 0.501 0.543 0.571 0.10 0.477 0.575 0.632 0.695 0.730 0.750
60 120 60 375
0.70 0.50 0.20 0.444 0.537 0.594 0.663 0.704 0.731 0.70 0.50 0.20 0.594 0.695 0.752 0.815 0.848 0.869
0.30 0.377 0.472 0.534 0.611 0.659 0.691 0.30 0.536 0.643 0.707 0.778 0.818 0.844
160 0.10 0.326 0.421 0.484 0.566 0.619 0.655 500 0.10 0.493 0.603 0.669 0.748 0.792 0.821
0.50 0.50 0.20 0.418 0.502 0.555 0.618 0.656 0.680 0.50 0.50 0.20 0.577 0.672 0.725 0.783 0.814 0.833
cd/klm 0.30 0.359 0.448 0.504 0.575 0.619 0.648 cd/klm 0.30 0.526 0.628 0.687 0.753 0.789 0.812
30 15 0 30 15 0
0.10 0.314 0.403 0.462 0.538 0.586 0.618 0.10 0.487 0.592 0.655 0.727 0.768 0.793
(cd/1000 lm) CIE FLUX CODE (cd/1000 lm) CIE FLUX CODE
90° 90°
CIE FLUX CODE 37 65 85 91 69 CIE FLUX CODE 51 85 97 98 72
C C 180°
180° 180.0° 0.0°
180.0° 0.0°
0° SPACING – HEIGHT RATIO 0° SPACING – HEIGHT RATIO
90.0° 270.0° 90.0° 270.0°
SHR NOM 1.50 SHR MAX 1.73 SHR MAX TR 2.09 SHR NOM 1.75 SHR MAX 1.86 SHR MAX TR 2.13
270° 270°
UTILISATION FACTOR – UF (Floor) γ°
UTILISATION FACTOR – UF (Floor)
γ°
REFLECTION FACTOR ROOM INDEX REFLECTION FACTOR ROOM INDEX
120 135 150 180
120 135 150 180
Ceiling Walls Floor 1.00 1.50 2.00 3.00 4.00 5.00 Ceiling Walls Floor 1.00 1.50 2.00 3.00 4.00 5.00
105
105 0.70 0.50 0.10 0.397 0.475 0.521 0.575 0.606 0.626 0.70 0.50 0.10 0.526 0.599 0.640 0.682 0.704 0.718
0.30 0.343 0.426 0.476 0.538 0.574 0.598 0.30 0.484 0.564 0.609 0.659 0.685 0.702
0.10 0.301 0.386 0.438 0.505 0.545 0.573 0.10 0.452 0.536 0.584 0.638 0.668 0.687
90
90 0.50 0.50 0.10 0.379 0.453 0.497 0.549 0.579 0.599 0.50 0.50 0.10 0.514 0.586 0.625 0.666 0.688 0.701
0.30 0.331 0.410 0.458 0.517 0.552 0.575 75 0.30 0.478 0.555 0.599 0.646 0.672 0.688
40
0.10 0.294 0.375 0.425 0.489 0.527 0.553 75
0.10 0.449 0.530 0.577 0.628 0.657 0.675
75
0.30 0.50 0.10 0.362 0.432 0.474 0.527 0.553 0.573 0.30 0.50 0.10 0.504 0.573 0.611 0.651 0.672 0.685
150
80
0.30 0.320 0.396 0.441 0.498 0.531 0.553 0.30 0.472 0.547 0.589 0.634 0.659 0.674
0.10 0.287 0.365 0.413 0.473 0.510 0.535 0.10 0.446 0.524 0.570 0.619 0.647 0.663
60 225
60 120 0.70 0.50 0.20 0.410 0.496 0.547 0.608 0.644 0.667 0.70 0.50 0.20 0.543 0.625 0.671 0.721 0.748 0.766
0.30 0.351 0.439 0.495 0.564 0.606 0.634 0.30 0.496 0.582 0.634 0.691 0.724 0.745
160 0.10 0.306 0.396 0.452 0.527 0.573 0.605 300 0.10 0.460 0.549 0.604 0.666 0.702 0.726
0.50 0.50 0.20 0.389 0.468 0.515 0.572 0.605 0.627 0.50 0.50 0.20 0.528 0.605 0.648 0.694 0.719 0.734
cd/klm 0.30 0.337 0.421 0.472 0.536 0.574 0.599 cd/klm 0.30 0.486 0.569 0.617 0.669 0.698 0.716
30 15 0 30 15 0
0.10 0.298 0.382 0.435 0.504 0.546 0.575 0.10 0.454 0.539 0.591 0.647 0.681 0.701
(cd/1000 lm) CIE FLUX CODE (cd/1000 lm) CIE FLUX CODE
90° 90°
CIE FLUX CODE 46 81 96 98 81 CIE FLUX CODE 31 59 82 65 91
C 180° C 180°
180.0° 0.0° 180.0° 0.0°
0° SPACING – HEIGHT RATIO 0° SPACING – HEIGHT RATIO
90.0° 270.0° 90.0° 270.0°
SHR NOM 1.75 SHR MAX 1.81 SHR MAX TR 2.20 SHR NOM 2.00 SHR MAX 2.03 SHR MAX TR 2.72
270° 270°
γ°
UTILISATION FACTOR – UF (Floor) γ°
UTILISATION FACTOR – UF (Floor)
REFLECTION FACTOR ROOM INDEX REFLECTION FACTOR ROOM INDEX
120 135 150 180 135 150 165 180
Ceiling Walls Floor 1.00 1.50 2.00 3.00 4.00 5.00 Ceiling Walls Floor 0.75 1.00 1.50 2.00 3.00 4.00 5.00
105 120
0.70 0.50 0.10 0.558 0.648 0.698 0.751 0.780 0.797 150 0.70 0.50 0.10 0.387 0.453 0.551 0.609 0.678 0.717 0.742
0.30 0.507 0.603 0.660 0.721 0.755 0.776 0.30 0.320 0.385 0.488 0.552 0.630 0.676 0.707
0.10 0.467 0.568 0.628 0.695 0.733 0.757 100 0.10 0.271 0.333 0.438 0.504 0.588 0.639 0.674
90
0.50 0.50 0.10 0.545 0.632 0.681 0.732 0.760 0.777 105 0.50 0.50 0.10 0.346 0.403 0.490 0.541 0.603 0.639 0.662
75 0.30 0.499 0.593 0.648 0.706 0.739 0.760 50 0.30 0.290 0.346 0.438 0.495 0.565 0.606 0.634
0.10 0.464 0.562 0.619 0.684 0.721 0.744 0.10 0.248 0.302 0.396 0.455 0.531 0.576 0.608
75
0.30 0.50 0.10 0.533 0.617 0.664 0.715 0.742 0.759 90 0.30 0.50 0.10 0.307 0.355 0.431 0.477 0.544 0.565 0.587
150
0.30 0.492 0.583 0.636 0.693 0.725 0.744 0.30 0.260 0.309 0.390 0.440 0.502 0.539 0.564
0.10 0.460 0.555 0.611 0.673 0.709 0.730 50 0.10 0.224 0.272 0.355 0.408 0.475 0.515 0.543
60 225
0.70 0.50 0.20 0.577 0.676 0.732 0.795 0.828 0.850 75 0.70 0.50 0.20 0.398 0.469 0.575 0.639 0.717 0.761 0.791
0.30 0.519 0.623 0.686 0.757 0.797 0.823 100 0.30 0.326 0.394 0.504 0.574 0.661 0.713 0.749
300 0.10 0.475 0.582 0.648 0.725 0.770 0.800 0.10 0.274 0.338 0.449 0.521 0.614 0.672 0.712
0.50 0.50 0.20 0.559 0.652 0.705 0.762 0.794 0.813 60 150 0.50 0.50 0.20 0.353 0.413 0.506 0.561 0.628 0.667 0.693
cd/klm 0.30 0.508 0.608 0.667 0.732 0.769 0.792 cd/klm 0.30 0.293 0.352 0.449 0.510 0.585 0.630 0.661
30 15 0 45 30 15 0
0.10 0.469 0.572 0.634 0.705 0.747 0.772 0.10 0.249 0.306 0.403 0.466 0.547 0.597 0.631
(cd/1000 lm) CIE FLUX CODE (cd/1000 lm) CIE FLUX CODE
90° 90°
CIE FLUX CODE 48 81 96 98 71 CIE FLUX CODE 34 63 85 61 83
C 180° C 180°
180.0° 0.0° 180.0° 0.0°
0° SPACING – HEIGHT RATIO 0° SPACING – HEIGHT RATIO
90.0° 270.0° 90.0° 270.0°
SHR NOM 1.50 SHR MAX 1.63 SHR MAX TR 1.84 SHR NOM 1.75 SHR MAX 1.80 SHR MAX TR 2.17
270° 270°
γ°
UTILISATION FACTOR – UF (Floor) γ°
UTILISATION FACTOR – UF (Floor)
120 135 150 180
REFLECTION FACTOR ROOM INDEX REFLECTION FACTOR ROOM INDEX
135 150 165 180
Ceiling Walls Floor 1.00 1.50 2.00 3.00 4.00 5.00 Ceiling Walls Floor 0.75 1.00 1.50 2.00 3.00 4.00 5.00
105
0.70 0.50 0.10 0.478 0.561 0.605 0.654 0.680 0.696 120 120 0.70 0.50 0.10 0.362 0.422 0.512 0.564 0.626 0.661 0.683
0.30 0.432 0.521 0.571 0.627 0.658 0.678 0.30 0.303 0.363 0.457 0.515 0.586 0.627 0.654
0.10 0.396 0.489 0.542 0.604 0.638 0.660 80 0.10 0.260 0.317 0.413 0.474 0.551 0.597 0.627
90
0.50 0.50 0.10 0.466 0.547 0.590 0.638 0.663 0.679 105 0.50 0.50 0.10 0.321 0.373 0.452 0.498 0.554 0.585 0.606
75 0.30 0.425 0.512 0.560 0.614 0.644 0.663 40 0.30 0.272 0.324 0.408 0.460 0.522 0.558 0.583
75 0.10 0.393 0.483 0.535 0.594 0.627 0.649 0.10 0.236 0.286 0.372 0.426 0.494 0.534 0.561
150
0.30 0.50 0.10 0.455 0.533 0.576 0.622 0.647 0.662 90 0.30 0.50 0.10 0.283 0.327 0.395 0.436 0.497 0.514 0.532
0.30 0.418 0.503 0.550 0.603 0.631 0.649 0.30 0.243 0.287 0.360 0.405 0.460 0.493 0.514
0.10 0.389 0.478 0.528 0.585 0.617 0.637 40 0.10 0.213 0.256 0.331 0.378 0.438 0.474 0.498
60 225
0.70 0.50 0.20 0.494 0.585 0.635 0.692 0.722 0.742 75 0.70 0.50 0.20 0.372 0.436 0.534 0.592 0.662 0.702 0.728
0.30 0.442 0.538 0.594 0.658 0.695 0.719 80 0.30 0.308 0.371 0.472 0.536 0.615 0.662 0.694
300 0.10 0.262 0.322 0.424 0.490 0.575 0.627 0.662
0.10 0.402 0.501 0.560 0.630 0.670 0.697
0.50 0.50 0.20 0.479 0.565 0.612 0.664 0.692 0.710 60 120 0.50 0.50 0.20 0.328 0.383 0.467 0.516 0.577 0.611 0.634
cd/klm 0.30 0.432 0.525 0.577 0.636 0.669 0.691 cd/klm 0.30 0.276 0.330 0.418 0.473 0.541 0.580 0.607
30 15 0 45 30 15 0
0.10 0.397 0.492 0.547 0.612 0.649 0.674 0.10 0.238 0.290 0.379 0.436 0.509 0.553 0.583
g GE Lighting 14
Photometric data
MAC 136 + MAC/R 4 MAX/V 158
POLAR DIAGRAM NORMAL EFFICIENCY POLAR DIAGRAM NORMAL EFFICIENCY
OF OUTPUT ULOR 0.000 DLOR 0.843 LOR 0.843 OF OUTPUT ULOR 0.014 DLOR 0.713 LOR 0.727
(cd/1000 lm) CIE FLUX CODE (cd/1000 lm) CIE FLUX CODE
90° 90°
CIE FLUX CODE 44 79 95 100 84 CIE FLUX CODE 46 81 96 98 72
C C 180°
180°
180.0° 0.0° 180.0° 0.0°
0° SPACING – HEIGHT RATIO 0° SPACING – HEIGHT RATIO
90.0° 270.0° 90.0° 270.0°
SHR NOM 1.50 SHR MAX 1.72 SHR MAX TR 2.05 SHR NOM 2.00 SHR MAX 2.01 SHR MAX TR 2.25
270° 270°
UTILISATION FACTOR – UF (Floor) γ°
UTILISATION FACTOR – UF (Floor)
γ°
REFLECTION FACTOR ROOM INDEX REFLECTION FACTOR ROOM INDEX
120 135 150 180 120 135 150 180
Ceiling Walls Floor 0.75 1.00 1.50 2.00 3.00 4.00 5.00 Ceiling Walls Floor 1.00 1.50 2.00 3.00 4.00 5.00
105 105
0.70 0.50 0.10 0.478 0.547 0.649 0.705 0.766 0.798 0.818 0.70 0.50 0.10 0.526 0.591 0.634 0.678 0.702 0.716
0.30 0.419 0.489 0.599 0.661 0.732 0.770 0.795 0.30 0.485 0.554 0.603 0.654 0.682 0.699
0.10 0.377 0.444 0.559 0.625 0.702 0.745 0.773 0.10 0.453 0.525 0.577 0.633 0.664 0.684
90 90
0.50 0.50 0.10 0.467 0.534 0.634 0.688 0.748 0.779 0.799 0.50 0.50 0.10 0.514 0.577 0.619 0.662 0.684 0.698
0.30 0.414 0.482 0.590 0.650 0.718 0.755 0.780 75 0.30 0.478 0.545 0.592 0.641 0.667 0.684
75
0.10 0.375 0.441 0.554 0.618 0.693 0.734 0.761 0.10 0.449 0.519 0.569 0.623 0.652 0.671
75 75
0.30 0.50 0.10 0.458 0.522 0.619 0.672 0.731 0.762 0.782 0.30 0.50 0.10 0.504 0.563 0.604 0.646 0.668 0.681
150 150
0.30 0.409 0.475 0.581 0.640 0.706 0.742 0.765 0.30 0.471 0.536 0.581 0.628 0.654 0.670
0.10 0.373 0.439 0.549 0.611 0.683 0.724 0.749 0.10 0.446 0.513 0.561 0.613 0.641 0.659
60 225 60 225
0.70 0.50 0.20 0.491 0.565 0.677 0.739 0.810 0.848 0.872 0.70 0.50 0.20 0.543 0.616 0.665 0.718 0.745 0.763
0.30 0.427 0.500 0.619 0.688 0.768 0.813 0.843 0.30 0.496 0.573 0.627 0.687 0.720 0.742
300 0.10 0.380 0.451 0.573 0.645 0.732 0.783 0.816 300 0.10 0.460 0.538 0.596 0.660 0.698 0.722
0.50 0.50 0.20 0.478 0.548 0.654 0.713 0.779 0.814 0.837 0.50 0.50 0.20 0.528 0.596 0.641 0.689 0.715 0.731
cd/klm 0.30 0.420 0.490 0.605 0.669 0.744 0.785 0.812 cd/klm 0.30 0.486 0.558 0.609 0.664 0.694 0.713
30 15 0 30 15 0
0.10 0.377 0.447 0.564 0.632 0.713 0.760 0.790 0.10 0.455 0.528 0.582 0.642 0.676 0.697
(cd/1000 lm) CIE FLUX CODE (cd/1000 lm) CIE FLUX CODE
90° 90°
CIE FLUX CODE 42 75 93 100 81 CIE FLUX CODE 46 81 97 98 65
C 180° C 180°
180.0° 0.0° 180.0° 0.0°
0° SPACING – HEIGHT RATIO 90.0° 270.0°
0° SPACING – HEIGHT RATIO
90.0° 270.0°
SHR NOM 1.75 SHR MAX 1.79 SHR MAX TR 2.11 SHR NOM 1.50 SHR MAX 1.74 SHR MAX TR 2.07
270° 270°
γ°
UTILISATION FACTOR – UF (Floor) γ° UTILISATION FACTOR – UF (Floor)
120 135 150 180
REFLECTION FACTOR ROOM INDEX 120 135 150 180
REFLECTION FACTOR ROOM INDEX
Ceiling Walls Floor 1.00 1.50 2.00 3.00 4.00 5.00 Ceiling Walls Floor 1.00 1.50 2.00 3.00 4.00 5.00
105 105
0.70 0.50 0.10 0.533 0.625 0.678 0.736 0.768 0.788 0.70 0.50 0.10 0.442 0.523 0.567 0.614 0.639 0.655
0.30 0.477 0.576 0.635 0.702 0.740 0.764 0.30 0.398 0.485 0.534 0.589 0.618 0.638
0.10 0.435 0.536 0.599 0.672 0.715 0.742 0.10 0.363 0.455 0.507 0.567 0.600 0.622
90 90
0.50 0.50 0.10 0.521 0.610 0.661 0.719 0.750 0.769 0.50 0.50 0.10 0.431 0.510 0.552 0.598 0.622 0.638
75 0.30 0.471 0.567 0.624 0.689 0.726 0.750 50 0.30 0.391 0.477 0.524 0.576 0.605 0.624
75
0.10 0.432 0.531 0.592 0.663 0.705 0.731 75 0.10 0.360 0.449 0.499 0.558 0.589 0.610
0.30 0.50 0.10 0.509 0.595 0.646 0.702 0.733 0.752 100
0.30 0.50 0.10 0.420 0.497 0.538 0.584 0.607 0.622
150
0.30 0.464 0.558 0.614 0.677 0.713 0.735 0.30 0.385 0.468 0.514 0.565 0.592 0.610
0.10 0.429 0.526 0.586 0.655 0.695 0.719 0.10 0.357 0.444 0.493 0.548 0.579 0.598
60 225 60 150
0.70 0.50 0.20 0.551 0.652 0.711 0.779 0.816 0.840 0.70 0.50 0.20 0.457 0.546 0.595 0.650 0.679 0.698
0.30 0.489 0.595 0.660 0.737 0.782 0.810 0.30 0.407 0.501 0.556 0.618 0.653 0.676
300 200
0.10 0.442 0.550 0.619 0.701 0.751 0.784 0.10 0.369 0.466 0.523 0.591 0.630 0.656
0.50 0.50 0.20 0.534 0.629 0.685 0.748 0.783 0.805 0.50 0.50 0.20 0.442 0.526 0.572 0.623 0.650 0.667
cd/klm 0.30 0.479 0.581 0.643 0.714 0.755 0.781 cd/klm 0.30 0.398 0.488 0.539 0.597 0.629 0.649
30 15 0 30 15 0
0.10 0.437 0.541 0.606 0.683 0.730 0.759 0.10 0.364 0.457 0.511 0.574 0.610 0.633
MAX/P 158
POLAR DIAGRAM NORMAL EFFICIENCY
OF OUTPUT ULOR 0.024 DLOR 0.756 LOR 0.780
90.0° 270.0°
0° SPACING – HEIGHT RATIO
SHR NOM 1.75 SHR MAX 1.95 SHR MAX TR 2.26
270°
γ°
UTILISATION FACTOR – UF (Floor)
120 135 150 180
REFLECTION FACTOR ROOM INDEX
Ceiling Walls Floor 1.00 1.50 2.00 3.00 4.00 5.00
105
0.70 0.50 0.10 0.518 0.604 0.653 0.706 0.735 0.753
0.30 0.467 0.560 0.615 0.676 0.710 0.732
0.10 0.428 0.524 0.583 0.650 0.688 0.712
90
0.50 0.50 0.10 0.503 0.587 0.634 0.686 0.714 0.731
50 0.30 0.458 0.549 0.602 0.660 0.693 0.714
75 0.10 0.423 0.517 0.573 0.637 0.674 0.697
100
0.30 0.50 0.10 0.490 0.571 0.617 0.668 0.694 0.711
0.30 0.450 0.537 0.589 0.645 0.677 0.696
0.10 0.418 0.509 0.564 0.625 0.661 0.682
60 150
0.70 0.50 0.20 0.535 0.630 0.685 0.747 0.781 0.802
0.30 0.478 0.578 0.640 0.710 0.750 0.776
200
0.10 0.435 0.538 0.602 0.678 0.723 0.752
0.50 0.50 0.20 0.516 0.606 0.658 0.714 0.746 0.765
cd/klm 0.30 0.466 0.562 0.619 0.683 0.720 0.743
30 15 0
0.10 0.428 0.526 0.587 0.657 0.698 0.724
MAX/P 258
POLAR DIAGRAM NORMAL EFFICIENCY
OF OUTPUT ULOR 0.018 DLOR 0.646 LOR 0.664
γ°
UTILISATION FACTOR – UF (Floor)
REFLECTION FACTOR ROOM INDEX
120 135 150 180
Ceiling Walls Floor 1.00 1.50 2.00 3.00 4.00 5.00
105
0.70 0.50 0.10 0.422 0.499 0.542 0.589 0.614 0.630
0.30 0.377 0.461 0.508 0.563 0.592 0.611
0.10 0.343 0.430 0.480 0.540 0.573 0.595
90
0.50 0.50 0.10 0.410 0.485 0.526 0.572 0.596 0.612
0.30 0.370 0.451 0.497 0.549 0.578 0.597
50
0.10 0.339 0.424 0.472 0.530 0.562 0.582
75
0.30 0.50 0.10 0.398 0.471 0.511 0.557 0.580 0.595
100
0.30 0.363 0.442 0.487 0.537 0.565 0.582
0.10 0.335 0.418 0.465 0.520 0.551 0.570
60 150 0.70 0.50 0.20 0.436 0.521 0.568 0.623 0.652 0.671
0.30 0.386 0.476 0.529 0.590 0.625 0.648
200 0.10 0.348 0.441 0.496 0.563 0.602 0.628
0.50 0.50 0.20 0.420 0.501 0.545 0.595 0.623 0.640
cd/klm 0.30 0.376 0.463 0.512 0.569 0.601 0.621
30 15 0
0.10 0.343 0.431 0.483 0.546 0.582 0.605
g GE Lighting 15
N-PACK and Accessories
NPD diffuser for single-lamp luminaires
Polycarbonate overtube
NPGT with reeding for NPP/NPQ
Trunking NAL Smooth NPGTL for NPP/NPQ
Dim. 46 x 68 mm Smooth NPGTW for NPGW
IP 54 High IP 54 protection class luminaires for T8 fluorescent lamps. Cover and attachments
can be fitted quickly without tools, cutting installation and maintenance costs.
Suitable for AD-FT ambients; in this case NPGTW polycarbonate overtube and VIT 2
Rapidstart safety starter should be used.
Body and cover: bonderised cold-rolled steel, thickness 5/10 mm for body, 6/10 mm for
cover with a white epoxy-polyester powder paint finish. Cover is mounted on the body
Length Fixing Holes using special wing nuts.
50 116
Type L (mm) D (mm) Lampholder: polycarbonate, fitted to the body by a safety clip; complete with soft
91 91 LOMOD® ring nuts to ensure an effective seal and prevent any danger of the lamp
NPW/X 118 620 343
failing; the “rotor” system enables continuous mounting of the luminaires.
D NPW/X 136 1230 950 Control gear and electric circuit: wired for 230V 50Hz using cables with silicon
NPW/X 158 1530 1250 sleeves; power factor correction using explosion-proof capacitor and built-in discharge
NPW/X 218 620 343 resistor; terminal block with 2.5 mm2 clamping screws. The control gear circuit wiring is
L NPW/X 236 1230 950 located on a removable sheet plate located inside the luminaire.
NPW/X 258 1530 1250 Max. exterior surface temperature of casing:
Tfn standard operation Class of temperature*
NPW/X 136 70°C T5
NPW/X 158 90°C T4
NPW/X 236 70°C T5
NPW/X 258 90°C T4
(*) According to Standard IEC 31-8 (in event of failure): T1 = 450°C; T2 = 300°C; T3 = 200°C; T4 = 135°C; T5 = 100°C; T6 = 85°C
Cable entry: using special hole in body through D18 grommet or through knockouts at
the end of the fittings.
Seals: expanded polyurethane resin between the body and cover plate; rubber between
lampholder and luminaire body.
NPW/X Class: I IP 54
230V 50Hz Class of Temperature: T4
NPW/X 118 H 1 x F18 T8 HPF 1,40 4 324 7004256
NPW/X 136 H 1 x F36 T8 HPF 2,25 4 180 7004257
NPW/X 158 H 1 x F58 T8 HPF 2,90 4 180 7004258
NPW/X 218 H 2 x F18 T8 HPF 1,50 4 168 30082
NPW/X 236 H 2 x F36 T8 HPF 3,30 4 112 7004259
NPW/X 258 H 2 x F58 T8 HPF 4,60 4 112 7004260
Multipack - Without lamp.
N° and Lamp Weight Pack Qty. Product N° and Lamp Weight Pack Qty. Product
Type Type Version (kg) Box Pallet Code Type Type Version (kg) Box Pallet Code
N° and Lamp Weight Pack Qty. Product N° and Lamp Weight Pack Qty. Product
Type Type Version (kg) Box Pallet Code Type Type Version (kg) Box Pallet Code
g GE Lighting 18
Note the resistance to chemical agents in construction materials.
• HPF = with power factor correction
N-PACK NPQ
Version without cover specially designed for mounting on NAL trunking using a
mechanical and electrical clip system that requires no tools. The electrical connection
uses a NAL 1652 terminal socket accessory previously fitted to the NAL trucking.
Body and cover: cold-rolled bonderised 5/10 mm sheet steel with a white epoxy-
polyester powder paint finish.
Length
Lampholder: polycarbonate, fitted to the body by a safety clip; complete with ring nuts
50 116 Type L (mm)
to ensure IP 40 and provide a further safety measure against the falling lamp; the
91 91
NPQ/X 118 620 “rotor” system enables continuous mounting of luminaires.
NPQ/X 130 925 Starter: position on side of body, allowing routine maintenance operations without
NPQ/X 136 1230 removing lamp or accessories.
NPQ/X 158 1530 Control gear and electrical circuit: 230V 50Hz wired with heat-resistant (HT 90°C),
NPQ/X 218 620 fire-retardant cable in compliance with IEC 20-22/II, with explosion-proof capacitor and
built-in discharge resistor (HPF version) with power factor fitting.
L NPQ/X 236 1230
Quick electric fitting: the system uses a terminal plug mounted in the body for quick
NPQ/X 258 1530
electrical connection with the NAL 1652 terminal socket (not included) previously
installed on trucking.
Quick mechanical fitting: the system comprises a ring nut which forms an integral
part of the body, a catch pin coaxial to the ring nut, and a spring clip which fastens to
Quick electric fitting
the trucking. Turn the right nut and pin to different positions to fit/release the luminaire
or mount accessories.
NAL 1652
NPQ/X Class: I IP 40
230V 50Hz
NPQ/X 118 H 1 x F18 T8 HPF 1,20 4 324 7004251
NPQ/X 136 H 1 x F36 T8 HPF 1,80 4 180 7004252
NPQ/X 158 H 1 x F58 T8 HPF 2,30 4 180 7004253
NPQ/X 218 H 2 x F18 T8 HPF 1,30 4 168 30078
NPQ/X 236 H 2 x F36 T8 HPF 2,80 4 112 7004254
NPQ/X 258 H 2 x F58 T8 HPF 3,90 4 112 7004255
Multipack - Without lamp.
N° and Lamp Weight Pack Qty. Product N° and Lamp Weight Pack Qty. Product
Type Type Version (kg) Box Pallet Code Type Type Version (kg) Box Pallet Code
90° 90°
NPP 136 + NPT 4 180°
NPP 236 + NPT 24
180.0°
C
0.0°
0°
180.0°
C
0.0°
180°
0° With Length Weight Pack Product
90.0° 270.0°
270°
90.0° 270.0°
270° Type Luminaire (mm) (kg) Qty. Code
γ° 180 150 135 120 γ° 180 150 135 120
105 105 105 105
90 90 90
NPT
90
75 75
NPT 2 1 x 18 620 0,40 6 32059
75 75 75 75
150 150 NPT 4 1 x 36 1230 0,80 6 7004205
60 225 60 60 225 60 NPT 5 1 x 58 1530 1,00 6 7004308
300 300 NPT 22 1/2 x 18 620 0,60 6 32061
30 15 0 15 30
cd/klm
30 15 0 15 30
cd/klm
NPT 24 1/2 x 36 1230 1,30 6 7004206
LOR 87,7% LOR 82,1%
NPT 25 1/2 x 58 1530 1,60 6 7004309
90° 90°
NPP 136 + NPR 4 NPP 236 + NPR 24 180°
180°
C 0° C 0°
180.0° 0.0° 180.0° 0.0°
75 75
75
150
75 75
150
75
NPR
225
NPR 4 1/2 x 36 1230 1,30 6 7004203
60 225 60 60 60
300 300
NPR 5 1/2 x 58 1530 1,60 6 7004204
cd/klm
30 15 0 15 30
cd/klm NPR 24 2 x 36 1230 1,60 6 32070
30 15 0 15 30
ULOR 4,6% DLOR 83,1% LOR 87,7% ULOR 5,7% DLOR 79,2% LOR 84,9% NPR 25 2 x 58 1530 2,00 6 7004307
NPA
NPA 4 1 x 36 1230 0,80 6 32072
NPA 5 1 x 58 1530 1,00 6 32073
g GE Lighting 20
N-PACK accessories
NPGR - Metal louvre
Clip fits on NPT twin-lamp reflectors and NPR single-lamp reflectors on single and twin-
112
batten luminaires. Two clip-fit end caps (supplied) close off ends. Bonderised pressed
sheet steel with white epoxy-polyester powder paint finish. Combination of louvre and
reflector provides effective lamp screening while maintaining light output.
170
Possibility of continuous mounting of luminaires by NPLT alignment clip instead of clip-
fit end caps.
90° 90°
NPP 136 + NPR 4 + NPGR 24 NPP 236 + NPT 24 + NPGR 24 180°
180°
C 0° C 0°
180.0° 0.0° 180.0° 0.0°
90 90 90 90
75 75
With Length Weight Pack Product
75 75 75
75
150 150
Type Luminaire (mm) (kg) Qty. Code
60 225 60 60 225 60
300 300
NPGR
cd/klm cd/klm NPGR 24 NPR 4 - NPT 24 1235 0,80 6 7004311
30 15 0 15 30 30 15 0 15 30
ULOR 4,0% DLOR 66,5% LOR 70,5% LOR 68,2 % NPGR 25 NPR 5 - NPT 25 1535 1,00 6 7004312
90°
NPP 136 + NPD 4 180°
C 0°
180.0° 0.0°
90.0° 270.0°
270°
100
With Length Weight Pack Product
105
50
105
Type Luminaire (mm) (kg) Qty. Code
90 90
50 NPD
75 75
100 NPD 2 NPP-NPQ 1 x 18 625 0,20 6 32075
60 150
cd/klm
60 NPD 4 NPP-NPQ 1 x 36 1235 0,35 6 32079
45 30 15 0 15 30 45
ULOR 26,9% DLOR 60,8% LOR 87,6% NPD 5 NPP-NPQ 1 x 58 1535 0,42 6 32088
90.0°
0.0°
270.0°
180.0°
90.0°
0.0°
270.0°
NPGT 2 NPP-NPQ 1/2 x 18 620 0,13 12/1 32090
270° 270°
45 30 15 0 15 30 45
cd/klm
60
NPGTW 4 NPW 1/2 x 36 1230 0,22 12/1 32101
45 30 15 0 15 30 45
ULOR 26,0% DLOR 61,5% LOR 87,5% ULOR 31,8% DLOR 54,3% LOR 86,1% NPGTW 5 NPW 1/2 x 58 1530 0,27 12/1 32102
g GE Lighting 21
N-PACK accessories
NPS - Wire guard
Electrically welded steel wire with polished galvanised finish. Hinge opening for lamp
110 110 changes.
Available in two versions:
65 128 NPS/P with nickel-plated brackets fitted to rear of NPP and NPW fittings.
NPS/Q with nickel-plated steel brackets for mounting on NPQ and NPW luminaires by
the ring nut of quick mechanical mount device.
NPS/P - NPS/Q
NPS/P 2 NPP-NPW 1 x 18 620 0,30 6 32110
NPS/P 4 NPP-NPW 1 x 36 1230 0,40 6 32112
NPS/P 5 NPP-NPW 1 x 58 1530 0,50 6 32113
NPS/P 22 NPP-NPW 2 x 18 620 0,40 6 32116
NPS/P 24 NPP-NPW 2 x 36 1230 0,60 6 32120
NPS/P 25 NPP-NPW 2 x 58 1530 0,70 6 32122
NPS/Q 2 NPQ-NPW 1 x 18 620 0,30 6 32124
NPS/Q 4 NPQ-NPW 1 x 36 1230 0,40 6 32125
NPS/Q 5 NPQ-NPW 1 x 58 1530 0,50 6 7004306
NPS/Q 22 NPQ-NPW 2 x 18 620 0,40 6 32128
NPS/Q 24 NPQ-NPW 2 x 36 1230 0,60 6 32133
NPS/Q 25 NPQ-NPW 2 x 58 1530 0,70 6 32124
Pack Product
Type Qty. Code
TCGR
TCGR 1 32135
Pack Product
Type Qty. Code
NPLT
NPLT 1 32136
g GE Lighting 22
N-PACK applications - designed by Europic software
NPW
NPP
NPQ
g GE Lighting 23
Trunking NAL
Load bearing ceiling-mounted or suspended trunking system for lighting installations.
Load-bearing body is made of bondarised 8/10 mm sheet steel with white epoxy-polyester powder paint finish.
IP 40
Various types of luminaires can be installed using the following accessories:
• NAL 1652 terminal socket for rapid electrical fitting of NPQ series luminaires.
• NAL 1023 suspension bracket for NPP, NPW, MARINER, MAC and other luminaires with mounting holes min. Ø 5 mm.
Follow the instructions supplied in the pack.
NAL system
Limit load conditions:
Admissible deflection F = L/300
Maximum load q max = 6 kg/m
Max. distance between suspension centres L max = 3000 mm
46
32
68
NAL 1030
NAL 1110
NAL 1003
NAL 1027
NAL 1026
NAL 1004
NAL 1002
NAL 1007
NAL 1001
g GE Lighting 24
Trunking NAL
Weight Pack Product Weight Pack Product
5 68
306 Type (kg) Qty. Code 49 Type (kg) Qty. Code
000 180
0
02 12
100 46 Trunking section White self-extinguishing PVC cover strip
NAL NAL 1001
NAL 1000 1,380 4 32559 NAL 1001 0,250 30 32624
66 NAL 2000 2,760 4 7004209
250
NAL 3000 4,140 4 7004210 Ø 5 mm suspension bracket for light fittings
20 44
44
78
NAL 1023
Straight joint 35 NAL 1023 0,030 100/2 32621
NAL 1002 Ø2 5
NAL 1002 0,455 20/1 7004316 Ø6 6
15 38 30 Trunking suspension chain
68
NAL 1025
40 End cap 75 NAL 1025 0,065 100/1 32617
ma x
46
38 NAL 1003 3000
NAL 1003 0,020 100/1 32566 Power supply set
188 188
NAL 1030
Suspension bracket for hanger or NAL 1025 NAL 1030 0,750 5/1 7004213
44
NAL 1004
66 NAL 1004 0,040 50/1 7004317 Terminal socket for NPQ
78 78
55 42 NAL 1652
188 Die cast aluminium “L” joint NAL 1652 0,003 50/1 32615
298 NAL 1006 32
Ceiling bracket
44
130
NAL 1026
NAL 1026 0,035 100/1 7004318
65
30 66
38
Wire clip
20 43
NAL 1027
38
10 NAL 1027 0,003 100/1 32589
g GE Lighting 25
MEGA
Mega is a modular lighting system developed to provide quick and easy installation
possibilities for large industrial and commercial areas. Owing to the direct mechanical
connection, the 4-pin connecting modules and the low number of joints, the installation
is very quick.
The product family includes single- and twin-lamp modules of max. 3m length, and steel
and aluminium reflectors with louvres.
Body: bonderised cold rolled 6/10mm sheet-steel with white epoxy-polyester powder
paint finish. Lampholder: polycarbonate with IP 40 protection, which can be improved
with MGGT covertube.
Covertube: Ø 29mm shatterproof self-extinguishing polycarbonate accessory.
Metal reflector: bonderised cold-pressed sheet steel with white epoxy-polyester
powder paint finish.
Aluminium reflector: cold pressed polished aluminium formed for optimum light
output.
Aluminium louvre: anodised anti-iridescent anti reflection aluminium featuring
parabolic longitudinal reflectors for wide and symmetrical Batwing light distribution and
optimum light output.
Control gear and electric circuit: 230V 50Hz; starter; wired with Ø 0.50 mm2 section
heat-resistant (HT 90°C) cable and with Ø 1.50 mm2 cable for power supply (2 phases +
neutral). Lampholders complete with cathode cover to guarantee IP 40 and to prevent
the lamp to fall.
Installation of modules: suspended with accessory SAC MGG or directly on the
ceiling.
IP 40 A
L
I
D
86
Dimensions (mm)
Type A I L D
g GE Lighting 26
MEGA
MEGA accessories
Pack Product Pack Product
Type Qty. Code Type Qty. Code
MGGT MGC
MGGT 4 1 37387 MGC 1 37275
MGGT 5 1 37386
2 pcs of suspension chain hook, with toothed
* May be used only with Rapidstart safety starter (VIT 2).
washer for micrometric adjustment
SAC MGG
Polycarbonate end cap
SAC MGG 1 37272
MGTE
MGTE 1 37271
Suspension set containing two nylon ceiling roses
and 2.5m long steel wire
SAC MGS
SAC MGS 1 37273
Empty steel sheet structural module with cover
MG ST Power supply set
MG 1232 ST 1 37277 NAL 1030
MG 1532 ST 1 37278 NAL 1030 1 7004213
g GE Lighting 27
Photometric data
NPP 136 NPP 136 + NPR 4
POLAR DIAGRAM NORMAL EFFICIENCY POLAR DIAGRAM NORMAL EFFICIENCY
OF OUTPUT ULOR 0.261 DLOR 0.684 LOR 0.945 OF OUTPUT ULOR 0.046 DLOR 0.831 LOR 0.878
(cd/1000 lm) CIE FLUX CODE (cd/1000 lm) CIE FLUX CODE
90° 90°
CIE FLUX CODE 32 60 82 72 94 CIE FLUX CODE 44 78 95 94 87
C 180° C 180°
180.0° 0.0° 180.0° 0.0°
0° SPACING – HEIGHT RATIO 0° SPACING – HEIGHT RATIO
90.0° 270.0° 90.0° 270.0°
SHR NOM 1.75 SHR MAX 1.95 SHR MAX TR 2.56 SHR NOM 1.75 SHR MAX 1.81 SHR MAX TR 2.30
270° 270°
γ°
UTILISATION FACTOR – UF (Floor) γ°
UTILISATION FACTOR – UF (Floor)
REFLECTION FACTOR ROOM INDEX REFLECTION FACTOR ROOM INDEX
135 150 165 180 120 135 150 180
Ceiling Walls Floor 0.75 1.00 1.50 2.00 3.00 4.00 5.00 Ceiling Walls Floor 0.75 1.00 1.50 2.00 3.00 4.00 5.00
105
120 150 0.70 0.50 0.10 0.411 0.480 0.584 0.645 0.718 0.759 0.786 0.70 0.50 0.10 0.482 0.554 0.660 0.717 0.781 0.814 0.836
0.30 0.340 0.408 0.517 0.584 0.667 0.715 0.748 0.30 0.421 0.493 0.607 0.672 0.745 0.785 0.811
100 0.10 0.288 0.352 0.463 0.533 0.622 0.676 0.713 0.10 0.376 0.446 0.565 0.634 0.714 0.759 0.788
90
105 0.50 0.50 0.10 0.374 0.435 0.529 0.585 0.652 0.690 0.716 0.50 0.50 0.10 0.466 0.535 0.637 0.693 0.754 0.787 0.808
50 0.30 0.314 0.374 0.474 0.535 0.610 0.654 0.685 75 0.30 0.412 0.481 0.592 0.654 0.724 0.762 0.788
0.10 0.269 0.327 0.428 0.492 0.573 0.622 0.656 0.10 0.371 0.440 0.555 0.620 0.697 0.740 0.768
75
90 0.30 0.50 0.10 0.340 0.393 0.477 0.528 0.599 0.625 0.649 0.30 0.50 0.10 0.452 0.517 0.616 0.670 0.731 0.761 0.782
150
0.30 0.288 0.342 0.432 0.487 0.555 0.596 0.624 0.30 0.403 0.470 0.577 0.637 0.704 0.741 0.764
50 0.10 0.249 0.301 0.393 0.451 0.525 0.570 0.601 0.10 0.366 0.433 0.544 0.608 0.681 0.722 0.748
60 225
75 0.70 0.50 0.20 0.422 0.496 0.609 0.677 0.759 0.806 0.838 0.70 0.50 0.20 0.495 0.572 0.688 0.752 0.826 0.865 0.891
100 0.30 0.346 0.417 0.534 0.608 0.700 0.755 0.793 0.30 0.428 0.504 0.627 0.699 0.782 0.829 0.860
0.10 0.291 0.358 0.475 0.551 0.649 0.710 0.753 300 0.10 0.380 0.454 0.580 0.654 0.745 0.797 0.832
60 150 0.50 0.50 0.20 0.383 0.447 0.546 0.606 0.679 0.721 0.749 0.50 0.50 0.20 0.477 0.549 0.658 0.718 0.786 0.822 0.846
cd/klm 0.30 0.318 0.381 0.485 0.550 0.632 0.680 0.714 cd/klm 0.30 0.417 0.490 0.607 0.673 0.750 0.793 0.820
45 30 15 0 30 15 0
0.10 0.270 0.330 0.436 0.503 0.590 0.644 0.681 0.10 0.374 0.445 0.565 0.635 0.718 0.767 0.798
(cd/1000 lm) CIE FLUX CODE (cd/1000 lm) CIE FLUX CODE
90° 90°
CIE FLUX CODE 35 63 85 63 90 CIE FLUX CODE 46 79 95 93 84
C 180° C 180°
180.0° 0.0° 180.0° 0.0°
0° SPACING – HEIGHT RATIO 0° SPACING – HEIGHT RATIO
90.0° 270.0° 90.0° 270.0°
SHR NOM 1.75 SHR MAX 1.79 SHR MAX TR 2.18 SHR NOM 1.50 SHR MAX 1.65 SHR MAX TR 1.88
270° 270°
γ°
UTILISATION FACTOR – UF (Floor) γ°
UTILISATION FACTOR – UF (Floor)
REFLECTION FACTOR ROOM INDEX REFLECTION FACTOR ROOM INDEX
135 150 165 180 120 135 150 180
Ceiling Walls Floor 0.75 1.00 1.50 2.00 3.00 4.00 5.00 Ceiling Walls Floor 0.75 1.00 1.50 2.00 3.00 4.00 5.00
120 105
150 0.70 0.50 0.10 0.397 0.462 0.559 0.616 0.683 0.721 0.745 0.70 0.50 0.10 0.480 0.546 0.643 0.696 0.756 0.787 0.807
0.30 0.332 0.397 0.499 0.562 0.639 0.683 0.713 0.30 0.422 0.489 0.594 0.654 0.722 0.760 0.784
100 0.10 0.285 0.347 0.451 0.517 0.600 0.650 0.683 0.10 0.381 0.446 0.555 0.618 0.693 0.735 0.763
90
105 0.50 0.50 0.10 0.354 0.411 0.496 0.547 0.607 0.641 0.664 0.50 0.50 0.10 0.464 0.526 0.620 0.671 0.728 0.759 0.778
50 0.30 0.301 0.357 0.448 0.504 0.572 0.612 0.639 75 0.30 0.413 0.477 0.578 0.635 0.700 0.736 0.759
0.10 0.261 0.315 0.408 0.467 0.541 0.585 0.615 0.10 0.375 0.438 0.543 0.604 0.675 0.715 0.741
75
90 0.30 0.50 0.10 0.315 0.362 0.437 0.482 0.548 0.567 0.588 0.30 0.50 0.10 0.449 0.508 0.598 0.647 0.705 0.732 0.751
150
0.30 0.270 0.319 0.398 0.447 0.508 0.544 0.567 0.30 0.404 0.465 0.562 0.617 0.679 0.713 0.735
50 0.10 0.237 0.284 0.366 0.418 0.483 0.522 0.548 0.10 0.369 0.430 0.532 0.590 0.658 0.696 0.720
60 225
75 0.70 0.50 0.20 0.408 0.478 0.583 0.646 0.723 0.766 0.795 0.70 0.50 0.20 0.493 0.564 0.671 0.731 0.800 0.836 0.861
100 0.30 0.338 0.406 0.516 0.585 0.671 0.722 0.756 0.30 0.430 0.501 0.614 0.680 0.758 0.802 0.832
0.10 0.288 0.353 0.463 0.534 0.626 0.683 0.721 300 0.10 0.385 0.453 0.569 0.639 0.723 0.772 0.806
60 150 0.50 0.50 0.20 0.362 0.422 0.513 0.567 0.633 0.670 0.695 0.50 0.50 0.20 0.474 0.540 0.640 0.696 0.759 0.793 0.815
cd/klm 0.30 0.305 0.363 0.459 0.519 0.593 0.636 0.666 cd/klm 0.30 0.419 0.485 0.592 0.654 0.725 0.765 0.791
45 30 15 0 30 15 0
0.10 0.263 0.319 0.415 0.477 0.557 0.606 0.639 0.10 0.378 0.443 0.553 0.618 0.696 0.741 0.770
(cd/1000 lm) CIE FLUX CODE (cd/1000 lm) CIE FLUX CODE
90° 90°
CIE FLUX CODE 43 77 94 100 87 CIE FLUX CODE 43 76 94 94 89
C 180° C
180.0° 0.0° 180°
0° SPACING – HEIGHT RATIO 180.0° 0.0°
0° SPACING – HEIGHT RATIO
90.0° 270.0° 90.0° 270.0°
SHR NOM 1.75 SHR MAX 1.78 SHR MAX TR 2.11 SHR NOM 1.75 SHR MAX 1.75 SHR MAX TR 2.09
270° 270°
γ°
UTILISATION FACTOR – UF (Floor) UTILISATION FACTOR – UF (Floor)
γ°
REFLECTION FACTOR ROOM INDEX REFLECTION FACTOR ROOM INDEX
120 135 150 180 120 135 150 180
Ceiling Walls Floor 0.75 1.00 1.50 2.00 3.00 4.00 5.00 Ceiling Walls Floor 0.75 1.00 1.50 2.00 3.00 4.00 5.00
105 105
0.70 0.50 0.10 0.489 0.560 0.666 0.725 0.790 0.825 0.847 0.70 0.50 0.10 0.487 0.558 0.664 0.722 0.789 0.824 0.846
0.30 0.427 0.498 0.613 0.678 0.754 0.795 0.822 0.30 0.424 0.495 0.610 0.675 0.751 0.793 0.820
0.10 0.382 0.451 0.570 0.639 0.721 0.768 0.798 0.10 0.378 0.447 0.566 0.635 0.719 0.766 0.796
90 90
0.50 0.50 0.10 0.478 0.546 0.650 0.707 0.771 0.805 0.827 0.50 0.50 0.10 0.470 0.538 0.640 0.697 0.761 0.795 0.817
75 0.30 0.422 0.491 0.603 0.667 0.739 0.780 0.806 0.30 0.414 0.483 0.593 0.656 0.729 0.769 0.796
75
0.10 0.380 0.448 0.565 0.632 0.712 0.756 0.786 0.10 0.373 0.440 0.555 0.621 0.701 0.746 0.775
75 75
0.30 0.50 0.10 0.468 0.533 0.635 0.690 0.754 0.787 0.809 0.30 0.50 0.10 0.455 0.519 0.618 0.673 0.737 0.768 0.789
150 150
0.30 0.417 0.484 0.594 0.656 0.727 0.766 0.791 0.30 0.405 0.471 0.577 0.638 0.708 0.747 0.771
0.10 0.378 0.445 0.559 0.625 0.702 0.746 0.773 0.10 0.367 0.432 0.544 0.608 0.684 0.727 0.754
60 225 225
0.70 0.50 0.20 0.503 0.579 0.695 0.761 0.836 0.876 0.903 60 0.70 0.50 0.20 0.500 0.576 0.693 0.758 0.834 0.875 0.902
0.30 0.435 0.510 0.633 0.706 0.791 0.839 0.871 0.30 0.431 0.507 0.630 0.702 0.789 0.837 0.870
300 0.10 0.385 0.458 0.584 0.660 0.753 0.806 0.843 300 0.10 0.381 0.454 0.580 0.656 0.750 0.804 0.841
0.50 0.50 0.20 0.489 0.561 0.671 0.733 0.803 0.841 0.866 0.50 0.50 0.20 0.481 0.552 0.661 0.722 0.792 0.830 0.855
cd/klm 0.30 0.427 0.500 0.618 0.686 0.766 0.811 0.839 cd/klm 0.30 0.420 0.491 0.608 0.676 0.755 0.800 0.829
30 15 0 30 15 0
0.10 0.382 0.453 0.575 0.647 0.733 0.783 0.816 0.10 0.375 0.445 0.565 0.636 0.722 0.772 0.805
(cd/1000 lm) CIE FLUX CODE (cd/1000 lm) CIE FLUX CODE
90° 90°
CIE FLUX CODE 46 79 95 100 82 CIE FLUX CODE 47 80 95 92 74
C 180° C 180°
180.0° 0.0° 180.0° 0.0°
0° SPACING – HEIGHT RATIO 0° SPACING – HEIGHT RATIO
90.0° 270.0° 90.0° 270.0°
SHR NOM 1.50 SHR MAX 1.65 SHR MAX TR 1.83 SHR NOM 1.50 SHR MAX 1.68 SHR MAX TR 1.90
270° 270°
γ°
UTILISATION FACTOR – UF (Floor) γ°
UTILISATION FACTOR – UF (Floor)
REFLECTION FACTOR ROOM INDEX REFLECTION FACTOR ROOM INDEX
120 135 150 180 120 135 150 180
Ceiling Walls Floor 0.75 1.00 1.50 2.00 3.00 4.00 5.00 Ceiling Walls Floor 0.75 1.00 1.50 2.00 3.00 4.00 5.00
105 105
0.70 0.50 0.10 0.477 0.542 0.638 0.691 0.749 0.779 0.799 0.70 0.50 0.10 0.424 0.482 0.566 0.612 0.664 0.691 0.708
0.30 0.421 0.487 0.591 0.649 0.716 0.752 0.776 0.30 0.375 0.433 0.524 0.576 0.635 0.667 0.688
0.10 0.381 0.444 0.552 0.614 0.688 0.729 0.755 0.10 0.339 0.396 0.490 0.545 0.610 0.646 0.670
90 90
0.50 0.50 0.10 0.467 0.530 0.624 0.674 0.731 0.761 0.780 0.50 0.50 0.10 0.410 0.465 0.546 0.590 0.639 0.665 0.682
75 0.30 0.417 0.480 0.582 0.639 0.703 0.738 0.762 75
0.30 0.366 0.422 0.510 0.559 0.615 0.646 0.666
75
0.10 0.379 0.442 0.548 0.608 0.679 0.718 0.744 0.10 0.334 0.389 0.480 0.532 0.593 0.628 0.650
75
0.30 0.50 0.10 0.458 0.518 0.609 0.659 0.715 0.744 0.763 0.30 0.50 0.10 0.397 0.449 0.526 0.569 0.618 0.641 0.658
150 150
0.30 0.412 0.474 0.573 0.628 0.691 0.725 0.747 0.30 0.358 0.411 0.495 0.542 0.596 0.625 0.644
0.10 0.377 0.439 0.542 0.601 0.670 0.708 0.732 0.10 0.328 0.382 0.469 0.519 0.578 0.610 0.631
60 225 60 225
0.70 0.50 0.20 0.490 0.560 0.666 0.725 0.792 0.828 0.851 0.70 0.50 0.20 0.436 0.498 0.591 0.643 0.702 0.734 0.755
0.30 0.429 0.498 0.610 0.675 0.752 0.794 0.823 0.30 0.381 0.443 0.541 0.599 0.666 0.704 0.730
300 0.10 0.384 0.451 0.567 0.635 0.717 0.765 0.798 300 0.10 0.342 0.402 0.503 0.563 0.636 0.679 0.707
0.50 0.50 0.20 0.477 0.543 0.644 0.699 0.761 0.795 0.817 0.50 0.50 0.20 0.419 0.477 0.564 0.612 0.666 0.695 0.714
cd/klm 0.30 0.422 0.489 0.596 0.657 0.728 0.768 0.793 cd/klm 0.30 0.371 0.430 0.522 0.575 0.637 0.671 0.693
30 15 0 30 15 0
0.10 0.382 0.447 0.557 0.622 0.699 0.744 0.772 0.10 0.336 0.393 0.488 0.544 0.611 0.650 0.675
g GE Lighting 28
Photometric data
NPP 236 + NPT 24 + NPGR 24 MG136 + MG0 4/12
POLAR DIAGRAM NORMAL EFFICIENCY POLAR DIAGRAM NORMAL EFFICIENCY
OF OUTPUT ULOR 0.000 DLOR 0.682 LOR 0.682 OF OUTPUT ULOR 0.002 DLOR 0.698 LOR 0.700
(cd/1000 lm) CIE FLUX CODE (cd/1000 lm) CIE FLUX CODE
90° 90°
CIE FLUX CODE 51 82 95 100 68 CIE FLUX CODE 60 92 98 99 70
C 180° C 180°
180.0° 0.0° 180.0° 0.0°
0° SPACING – HEIGHT RATIO 0° SPACING – HEIGHT RATIO
90.0° 270.0° 90.0° 270.0°
SHR NOM 1.50 SHR MAX 1.55 SHR MAX TR 1.79 SHR NOM 1.75 SHR MAX 1.99 SHR MAX TR 2.23
270° 270°
γ°
UTILISATION FACTOR – UF (Floor) γ°
UTILISATION FACTOR – UF (Floor)
REFLECTION FACTOR ROOM INDEX REFLECTION FACTOR ROOM INDEX
120 135 150 180 120 135 150 180
Ceiling Walls Floor 0.75 1.00 1.50 2.00 3.00 4.00 5.00 Ceiling Walls Floor 1.00 1.50 2.00 3.00 4.00 5.00
105 105
0.70 0.50 0.10 0.424 0.475 0.549 0.588 0.632 0.655 0.670 0.70 0.50 0.10 0.560 0.618 0.649 0.681 0.698 0.708
0.30 0.382 0.433 0.513 0.557 0.608 0.635 0.653 0.30 0.528 0.591 0.626 0.663 0.684 0.696
0.10 0.350 0.401 0.484 0.531 0.586 0.617 0.637 0.10 0.503 0.569 0.607 0.648 0.671 0.685
90 90
0.50 0.50 0.10 0.416 0.466 0.537 0.576 0.618 0.640 0.655 0.50 0.50 0.10 0.551 0.607 0.637 0.668 0.684 0.694
0.30 0.378 0.428 0.506 0.549 0.597 0.623 0.641 0.30 0.523 0.584 0.618 0.653 0.672 0.684
75 75
0.10 0.349 0.399 0.480 0.525 0.578 0.608 0.627 0.10 0.501 0.565 0.601 0.640 0.661 0.674
75 75
0.30 0.50 0.10 0.409 0.456 0.526 0.564 0.605 0.627 0.641 0.30 0.50 0.10 0.543 0.597 0.626 0.656 0.671 0.680
150 150
0.30 0.374 0.423 0.498 0.540 0.587 0.613 0.629 0.30 0.518 0.577 0.609 0.643 0.661 0.672
0.10 0.347 0.396 0.475 0.520 0.571 0.599 0.617 0.10 0.498 0.560 0.595 0.631 0.652 0.664
60 225 0.70 0.50 0.20 0.436 0.491 0.573 0.618 0.669 0.696 0.714 60 225 0.70 0.50 0.20 0.578 0.644 0.681 0.721 0.742 0.755
0.30 0.388 0.443 0.530 0.580 0.638 0.670 0.692 0.30 0.540 0.610 0.651 0.696 0.722 0.738
300 0.10 0.354 0.407 0.496 0.548 0.611 0.648 0.673 300 0.10 0.511 0.584 0.627 0.676 0.705 0.723
0.50 0.50 0.20 0.426 0.478 0.555 0.597 0.644 0.669 0.686 0.50 0.50 0.20 0.566 0.627 0.660 0.696 0.715 0.726
cd/klm 0.30 0.383 0.436 0.518 0.565 0.618 0.648 0.667 cd/klm 0.30 0.532 0.598 0.636 0.676 0.699 0.712
30 15 0 30 15 0
0.10 0.351 0.403 0.488 0.537 0.596 0.630 0.651 0.10 0.506 0.575 0.615 0.659 0.685 0.700
(cd/1000 lm) CIE FLUX CODE (cd/1000 lm) CIE FLUX CODE
90° 90°
CIE FLUX CODE 31 59 81 69 87 CIE FLUX CODE 59 90 98 99 64
C 180° C 180°
180.0° 0.0° 180.0° 0.0°
0° SPACING – HEIGHT RATIO 0° SPACING – HEIGHT RATIO
90.0° 270.0° 90.0° 270.0°
SHR NOM 1.75 SHR MAX 1.96 SHR MAX TR 2.71 SHR NOM 1.25 SHR MAX 1.35 SHR MAX TR 1.47
270° 270°
γ°
UTILISATION FACTOR – UF (Floor) γ°
UTILISATION FACTOR – UF (Floor)
REFLECTION FACTOR ROOM INDEX REFLECTION FACTOR ROOM INDEX
135 150 165 180 120 135 150 180
Ceiling Walls Floor 0.75 1.00 1.50 2.00 3.00 4.00 5.00 Ceiling Walls Floor 1.00 1.50 2.00 3.00 4.00 5.00
120 150 105
0.70 0.50 0.10 0.375 0.438 0.532 0.588 0.655 0.693 0.718 0.70 0.50 0.10 0.467 0.535 0.570 0.609 0.628 0.640
0.30 0.309 0.371 0.470 0.531 0.607 0.652 0.682 0.30 0.431 0.504 0.544 0.588 0.612 0.626
100 0.10 0.261 0.319 0.420 0.483 0.565 0.615 0.649 0.10 0.403 0.479 0.522 0.571 0.597 0.614
90
105 0.50 0.50 0.10 0.338 0.393 0.478 0.528 0.589 0.624 0.648 0.50 0.50 0.10 0.458 0.524 0.558 0.595 0.614 0.626
50 0.30 0.282 0.337 0.426 0.482 0.550 0.591 0.619 0.30 0.426 0.497 0.536 0.578 0.601 0.615
75
0.10 0.241 0.293 0.384 0.442 0.516 0.561 0.592 0.10 0.400 0.475 0.516 0.563 0.588 0.604
75
90 0.30 0.50 0.10 0.303 0.351 0.426 0.472 0.537 0.559 0.582 0.30 0.50 0.10 0.450 0.513 0.547 0.583 0.602 0.613
150
0.30 0.257 0.304 0.384 0.434 0.495 0.533 0.558 0.30 0.421 0.490 0.528 0.569 0.590 0.603
50 0.10 0.221 0.267 0.349 0.401 0.467 0.508 0.536 0.10 0.398 0.470 0.511 0.555 0.580 0.594
0.70 0.50 0.20 0.385 0.452 0.555 0.617 0.692 0.736 0.765 60 225
75 0.70 0.50 0.20 0.483 0.558 0.598 0.644 0.667 0.682
100 0.30 0.314 0.379 0.485 0.553 0.637 0.688 0.723 0.30 0.441 0.520 0.566 0.618 0.646 0.664
0.10 0.264 0.325 0.430 0.500 0.590 0.646 0.686 300 0.10 0.409 0.491 0.539 0.595 0.627 0.648
60 150 0.50 0.50 0.20 0.345 0.403 0.493 0.547 0.613 0.652 0.678 0.50 0.50 0.20 0.470 0.541 0.579 0.620 0.642 0.655
cd/klm 0.30 0.286 0.343 0.437 0.496 0.570 0.614 0.645 cd/klm 0.30 0.433 0.509 0.551 0.599 0.624 0.640
45 30 15 0 30 15 0
0.10 0.243 0.297 0.391 0.452 0.531 0.581 0.615 0.10 0.405 0.483 0.528 0.580 0.609 0.627
(cd/1000 lm) CIE FLUX CODE (cd/1000 lm) CIE FLUX CODE
90° 90°
CIE FLUX CODE 31 59 81 70 87 CIE FLUX CODE 52 86 97 99 66
C 180° C 180°
180.0° 0.0° 180.0° 0.0°
0° SPACING – HEIGHT RATIO 0° SPACING – HEIGHT RATIO
90.0° 270.0° 90.0° 270.0°
SHR NOM 1.75 SHR MAX 1.98 SHR MAX TR 2.76 SHR NOM 1.50 SHR MAX 1.65 SHR MAX TR 1.85
270° 270°
γ°
UTILISATION FACTOR – UF (Floor) γ°
UTILISATION FACTOR – UF (Floor)
REFLECTION FACTOR ROOM INDEX REFLECTION FACTOR ROOM INDEX
135 150 165 180 120 135 150 180
Ceiling Walls Floor 0.75 1.00 1.50 2.00 3.00 4.00 5.00 Ceiling Walls Floor 1.00 1.50 2.00 3.00 4.00 5.00
120 105
120 0.70 0.50 0.10 0.373 0.437 0.532 0.589 0.656 0.694 0.720 0.70 0.50 0.10 0.465 0.538 0.577 0.618 0.639 0.653
0.30 0.307 0.369 0.469 0.531 0.608 0.653 0.684 0.30 0.425 0.505 0.548 0.596 0.621 0.637
80 0.10 0.259 0.318 0.419 0.484 0.566 0.617 0.651 0.10 0.395 0.478 0.524 0.576 0.605 0.623
90
105 0.50 0.50 0.10 0.337 0.393 0.479 0.530 0.592 0.627 0.651 0.50 0.50 0.10 0.455 0.526 0.563 0.604 0.624 0.637
40 0.30 0.281 0.336 0.427 0.483 0.553 0.594 0.622 75 0.30 0.419 0.497 0.539 0.584 0.609 0.625
0.10 0.239 0.292 0.385 0.443 0.518 0.564 0.595 0.10 0.392 0.473 0.518 0.568 0.595 0.613
75
90 0.30 0.50 0.10 0.303 0.352 0.428 0.475 0.540 0.564 0.587 0.30 0.50 0.10 0.445 0.515 0.551 0.590 0.610 0.623
150
0.30 0.256 0.305 0.386 0.436 0.499 0.537 0.563 0.30 0.414 0.489 0.530 0.574 0.598 0.613
40 0.10 0.220 0.267 0.351 0.403 0.471 0.512 0.541 0.10 0.389 0.468 0.511 0.560 0.586 0.602
60 225
75 0.70 0.50 0.20 0.383 0.451 0.555 0.617 0.694 0.738 0.767 0.70 0.50 0.20 0.480 0.561 0.605 0.654 0.679 0.696
80 0.30 0.312 0.378 0.485 0.553 0.638 0.690 0.725 0.30 0.435 0.521 0.570 0.625 0.656 0.676
0.10 0.261 0.323 0.430 0.500 0.591 0.648 0.687 300 0.10 0.401 0.490 0.541 0.601 0.635 0.658
60 120 0.50 0.50 0.20 0.345 0.403 0.494 0.549 0.616 0.655 0.681 0.50 0.50 0.20 0.467 0.543 0.584 0.628 0.652 0.667
cd/klm 0.30 0.285 0.342 0.438 0.497 0.572 0.617 0.648 cd/klm 0.30 0.427 0.509 0.555 0.605 0.633 0.651
45 30 15 0 30 15 0
0.10 0.241 0.296 0.391 0.453 0.534 0.584 0.618 0.10 0.396 0.481 0.530 0.585 0.616 0.637
(cd/1000 lm) CIE FLUX CODE (cd/1000 lm) CIE FLUX CODE
90° 90°
CIE FLUX CODE 36 65 86 63 86 CIE FLUX CODE 60 92 98 99 51
C 180° C 180°
180.0° 0.0° 180.0° 0.0°
0° SPACING – HEIGHT RATIO 0° SPACING – HEIGHT RATIO
90.0° 270.0° 90.0° 270.0°
SHR NOM 1.50 SHR MAX 1.74 SHR MAX TR 2.18 SHR NOM 1.75 SHR MAX 1.84 SHR MAX TR 2.18
270° 270°
γ°
UTILISATION FACTOR – UF (Floor) γ°
UTILISATION FACTOR – UF (Floor)
REFLECTION FACTOR ROOM INDEX REFLECTION FACTOR ROOM INDEX
135 150 165 180 120 135 150 180
Ceiling Walls Floor 0.75 1.00 1.50 2.00 3.00 4.00 5.00 Ceiling Walls Floor 1.00 1.50 2.00 3.00 4.00 5.00
120 105
150 0.70 0.50 0.10 0.382 0.445 0.536 0.590 0.652 0.687 0.709 0.70 0.50 0.10 0.413 0.457 0.480 0.504 0.517 0.525
0.30 0.322 0.384 0.481 0.540 0.611 0.653 0.680 0.30 0.389 0.436 0.463 0.491 0.506 0.516
100 0.10 0.278 0.337 0.437 0.498 0.576 0.622 0.653 0.10 0.371 0.420 0.449 0.479 0.497 0.507
90
105 0.50 0.50 0.10 0.341 0.396 0.477 0.524 0.580 0.611 0.632 0.50 0.50 0.10 0.407 0.449 0.471 0.494 0.506 0.514
50 0.30 0.291 0.345 0.432 0.485 0.548 0.584 0.609 75
0.30 0.385 0.431 0.456 0.483 0.497 0.506
0.10 0.254 0.307 0.395 0.450 0.519 0.560 0.587 0.10 0.369 0.417 0.444 0.473 0.489 0.499
75
90 0.30 0.50 0.10 0.303 0.349 0.420 0.462 0.523 0.540 0.559 0.30 0.50 0.10 0.400 0.441 0.463 0.485 0.496 0.503
150
0.30 0.262 0.309 0.385 0.430 0.486 0.519 0.540 0.30 0.381 0.425 0.450 0.475 0.489 0.497
50 0.10 0.231 0.277 0.355 0.403 0.463 0.499 0.523 0.10 0.366 0.413 0.439 0.467 0.482 0.491
60 225
75 0.70 0.50 0.20 0.392 0.459 0.559 0.619 0.690 0.730 0.756 0.70 0.50 0.20 0.427 0.476 0.504 0.534 0.549 0.559
100 0.30 0.327 0.393 0.497 0.562 0.642 0.689 0.721 0.30 0.398 0.451 0.482 0.515 0.534 0.547
0.10 0.280 0.343 0.448 0.515 0.601 0.653 0.689 300 0.10 0.377 0.431 0.463 0.500 0.522 0.535
60 150 0.50 0.50 0.20 0.349 0.406 0.492 0.543 0.604 0.639 0.661 0.50 0.50 0.20 0.417 0.463 0.488 0.515 0.529 0.538
cd/klm 0.30 0.295 0.352 0.443 0.499 0.567 0.607 0.634 cd/klm 0.30 0.392 0.441 0.470 0.500 0.517 0.527
45 30 15 0 30 15 0
0.10 0.256 0.310 0.402 0.461 0.535 0.580 0.610 0.10 0.373 0.424 0.454 0.487 0.506 0.518
g GE Lighting 29
SERIES 5000 - Optical accessories
C 90°
180.0° 0.0°
180°
90.0° 270.0°
0°
270°
120 135 150 180 150 135 120 WHITE ALUMINIUM LOUVRE
105 105 - Reference /5
Louvre with broad symmetrical light
90 90 distribution, featuring longitudinal reflectors
and straight transverse blades, in aluminium
75 75
with gloss white painted finish.
60 60
30 15 0 15 30
120 135 150 180 150 135 120 POLISHED ALUMINIUM LOUVRE
105 105 - Reference/6
Louvre with broad symmetrical light
90 90 distribution, featuring longitudinal reflectors,
in aluminium with polished finish (99.85%),
75 75
satin-finished extruded aluminium transverse
blades.
60 60
30 15 0 15 30
30 15 0 15 30
30 15 0 15 30
75 75
60 60
30 15 0 15 30
g GE Lighting 30
Series 5500
L2
Series 5500
Recessed luminaires for mounting on exposed 24 mm T sections of 600mm x 600mm
92 suspended ceilings.
Body: press-bent 6/10 mm sheet steel (7.5/10 mm for 4x36 models) with white powder
A L1 paint finish.
Optical accessories: see page 30.
Control gear and electric circuit: 230V 50Hz; with starter, HT 90°C heat-resistant hard
Dimensions (mm)
wires, complete with built-in 2A fuse.
Type A L1 L2
Lampholder with covers for IP 40 protection level.
5500/218 292 592 622 SPECIAL VERSIONS: see page 37.
5500/236 292 1192 1232
5500/318 592 592 622
5500/418 592 592 622
5500/436 592 1192 1232
5500/334/2L 592 592 622
5500/218 Class: I IP 40
230V 50Hz
5500/218/5 H 2 x F18 T8 4,00 1 60 30096
5500/218/6 H 2 x F18 T8 4,00 1 60 31540
5500/218/12 H 2 x F18 T8 4,00 1 60 31435
5500/218/16 H 2 x F18 T8 4,00 1 60 31437
N° and Lamp Weight Pack Qty. Product
5500/218/51 H 2 x F18 T8 4,00 1 60 31438
Type Type (kg) Box Pallet Code
H = with power factor correction - Without lamp.
g GE Lighting 31
Series 5501
Series 5501
L2
Luminaires for hidden structure 600mm x 600mm suspended ceilings, complete with micro-
92
metric adjustment mounting clips.
Body: press-bent 6/10 mm sheet steel (7.5/10 mm for 4x36 models) with white powder
A L1 paint finish.
Optical accessories: see page 30.
Control gear and electric circuit: 230V 50Hz; with starter, HT 90°C heat-resistant hard
Dimensions (mm) wires, complete with built-in 2A fuse.
Type A L1 L2 Lampholder with cathode covers for IP 40 protection level.
SPECIAL VERSIONS: see page 37.
5501/418 599 599 622
5501/436 599 1199 1232
5501/334/2L 599 599 622
5501/418 Class: I IP 40
230V 50Hz
5501/418/5 H 4 x F18 T8 5,80 1 20 7004130
5501/418/6 H 4 x F18 T8 5,80 1 20 30131
5501/418/12 H 4 x F18 T8 5,80 1 20 31475
5501/418/16 H 4 x F18 T8 5,80 1 20 31476
5501/418/51 H 4 x F18 T8 5,80 1 20 31477
H = with power factor correction - Without lamp.
g GE Lighting 32
Series 5502 for indirect lighting
5502/234/C H 5502/234/L H
5502/255/C EB 5502/255/L EB
5502 Class: I IP 40
230V 50Hz
5502/234/C H 2 x F34 BX 8,80 1 20 38414
5502/234/L H 2 x F34 BX 8,80 1 20 38420
5502/255/C EB 2 x F55 BX 8,20 1 20 38423
5502/255/L EB 2 x F55 BX 8,20 1 20 38424
H = with power factor correction - EB = Electronic ballast - Without lamp.
90° 90°
5502/234/C 5502/234/L
180° 180°
C 0° C 0°
180.0° 0.0° 180.0° 0.0°
90 90 90 90
40 30
75 75 75 75
80 60
60 120 60 60 90 60
160 120
cd/klm cd/klm
30 15 0 15 30 30 15 0 15 30
g GE Lighting 33
Series 5503
I Series 5503
A1 L2 Luminaires for all types of suspended ceiling (excepting mineral fibre panels) complete
with micrometric adjustment mounting clips.
92 Body: 6/10 mm press-bent sheet with white powder paint finish.
Optical accessories: see page 30.
A L1
Control gear and electric circuit: 230V 50Hz; with starter, HT 90 °C heat-resistant hard
wires, explosion-proof power factor correction capacitor with built-in discharge resistance;
Dimensions (mm) terminal block with 2.5 mm2 clamping screws complete with built-in 2A fuse.
Type A A1 L1 L2 I Lampholder with cathode covers for IP 40 protection level.
SPECIAL VERSIONS: see page 37.
5503/118 225 165 685 622 690
5503/136 225 165 1295 1232 1300
5503/158 225 165 1595 1532 1600
N° and Lamp Weight Pack Qty. Product
5503/218 325 265 685 622 690
Type Type (kg) Box Pallet Code
5503/236 325 265 1295 1232 1300
5503/258 325 265 1595 1532 1600 5503/218 Class: I IP 40
5503/418 625 560 625 622 690 230V 50Hz
5503/218/5 H 2 x F18 T8 3,70 1 40 30158
5503/218/6 H 2 x F18 T8 3,70 1 40 30565
5503/218/12 H 2 x F18 T8 3,70 1 40 31495
5503/218/16 H 2 x F18 T8 3,70 1 40 31498
N° and Lamp Weight Pack Qty. Product
5503/218/51 H 2 x F18 T8 3,70 1 40 31499
Type Type (kg) Box Pallet Code
H = with power factor correction - Without lamp.
g GE Lighting 34
Series 5504
I Series 5504
L2 Luminaires with rounded edges for stave-type suspended ceilings with a modular distance
of 100 mm, complete with micrometric adjustment mounting clips.
92 Body: 6/10 press-bent sheet steel with stoved white powder paint finish.
Optical accessories: see page 30.
A L1
Control gear and electric circuit: 230V 50Hz; with starter, HT 90 °C heat-resistant hard
wires, explosion-proof power factor correction capacitor with built-in discharge resistance;
Dimensions (mm) terminal block with 2.5 mm2 clamping screws complete with built-in 2A fuse.
Type A L1 L2 I Lampholder with cathode covers for IP 40 protection level.
SPECIAL VERSIONS: see page 37.
5504/118 186 648 622 675
5504/136 186 1258 1232 1285
5504/158 186 1558 1532 1585
5504/218 286 648 622 675
5504/236 286 1258 1232 1285
5504/258 286 1558 1532 1585
N° and Lamp Weight Pack Qty. Product N° and Lamp Weight Pack Qty. Product
Type Type (kg) Box Pallet Code Type Type (kg) Box Pallet Code
g GE Lighting 35
Series 5506
Series 5506
D
Ceiling mount luminaires.
Body: 6/10 mm cold-rolled sheet steel with white paint powder finish.
90
End caps: white polycarbonate.
A L Optical accessories: see page 30.
Control gear and electric circuit: 230V 50Hz; with starter, HT 90°C heat-resistant hard
wires, explosion-proof power factor correction capacitor, built-in discharge resistance;
Dimensions (mm) terminal block with 2.5 mm2 clamping screws complete with built-in 3.15A fuse.
Type A L D Lampholder with cathode covers for IP 40 protection level.
5506/118 174 655 400 SPECIAL VERSIONS: see page 37.
5506/136 174 1265 900
5506/158 174 1565 1200
5506/218 296 655 400
5506/236 296 1265 900 N° and Lamp Weight Pack Qty. Product
5506/258 296 1565 1200 Type Type (kg) Box Pallet Code
5506/218 Class: I IP 40
230V 50Hz
5506/218/5 H 2 x F18 T8 3,90 1 40 7004138
N° and Lamp Weight Pack Qty. Product 5506/218/6 H 2 x F18 T8 3,90 1 40 7004139
Type Type (kg) Box Pallet Code
5506/218/12 H 2 x F18 T8 3,90 1 40 30197
5506/218/16 H 2 x F18 T8 3,90 1 40 30200
5506/118 Class: I IP 40
5506/218/51 H 2 x F18 T8 3,90 1 40 30201
230V 50Hz
H = with power factor correction - Without lamp.
5506/118/5 H 1 x F18 T8 3,50 1 80 7004132
5506/118/6 H 1 x F18 T8 3,50 1 80 7004133
5506/236 Class: I IP 40
230V 50Hz
5506/118/12 H 1 x F18 T8 3,50 1 80 30181
5506/118/16 H 1 x F18 T8 3,50 1 80 30183 5506/236/5 H 2 x F36 T8 6,50 1 30 7004140
5506/118/51 H 1 x F18 T8 3,50 1 80 30184 5506/236/6 H 2 x F36 T8 6,50 1 30 7004141
H = with power factor correction - Without lamp. 5506/236/12 H 2 x F36 T8 6,50 1 30 7004282
5506/236/16 H 2 x F36 T8 6,50 1 30 7004283
5506/136 Class: I IP 40 5506/236/51 H 2 x F36 T8 6,50 1 30 30217
230V 50Hz
H = with power factor correction - Without lamp.
5506/136/5 H 1 x F36 T8 5,50 1 50 7004134
5506/136/6 H 1 x F36 T8 5,50 1 50 7004135 5506/258 Class: I IP 40
5506/136/12 H 1 x F36 T8 5,50 1 50 7004279 230V 50Hz
g GE Lighting 36
Series 5000 - Special versions
EB – Luminaires equipped with electronic ballast (cos ϕ = 0,97) EES – Luminaires equipped with autonomous emergency group (1 lamp on emergency)
118 EB 5503 5504 5506 118 EES 5503 5504 5506
136 EB 5503 5504 5506 136 EES 5503 5504 5506
158 EB 5503 5504 5506 158 EES 5503 5504 5506
218 EB 5500 5503 5504 5506 218 EES 5500 5503 5504 5506
236 EB 5500 5503 5504 5506 236 EES 5500 5503 5504 5506
258 EB 5503 5504 5506 258 EES 5503 5504 5506
418 EB 5500 5501 5503 5504 5506 418 EES 5500 5501 5503 5504 5506
Check the feasibility and delivery conditions with our Customer Service. Check the feasibility and delivery conditions with our Customer Service.
Clips
Luminaires 5501 – 5503 – 5504 are supplied complete with micrometric adjustment
plastic mounting clips for quick and easy installation. Clip levers can be set to three
different positions for adaptation to specific needs. Clip mounting system has been
specially designed to allow the luminaires to be mounted from inside without having
to remove any adjacent suspended ceiling elements.
Fuse
All 5000 series luminaires are supplied with a terminal block featuring a built-in 2A fuse
(3.15A for 5506 version) that isolates units with failures for rapid identification, further
enhancing electrical system safety standards.
g GE Lighting 37
NUPLEX
Hidden mounted luminaires with prismatic diffusers for optimal light distribution, a high
D
level of protection against the entry of solid foreign objects and total protection against
any form of accidental contact with parts under voltage.
H
Luminaires can be mounted directly on the ceiling or suspended.
A L Body: bonderised cold-pressed sheet steel with epoxy-polyester powder paint finish.
Diffuser: injection-moulded acrylic with prismatic reeding.
Control gear and electric circuit: wired for 230V 50Hz using heat-resistant cables;
Dimensions (mm) explosion-proof capacitor with built-in discharge resistance; terminal block with 2.5 mm2
Type A H L D clamping screws.
NUPLEX Class: I IP 40
230V 50Hz CEI 34.21 / EN 60598-1
NUA 118 H 1 x F18 T8 2,40 1 84 38425
NUA 136 H 2 x F36 T8 3,70 1 63 7004168
NUA 158 H 1 x F58 T8 4,90 1 63 30222
NUA 218 H 2 x F18 T8 2,80 1 66 7004169
NUA 236 H 2 x F36 T8 4,70 1 44 7004170
NUA 258 H 2 x F58 T8 7,80 1 44 7004171
NUA 418 H 4 x F18 T8 7,50 1 22 7004172
H = with power factor correction - Without lamp.
γ° 180 165 150 135 γ° 180 150 135 120 γ° 180 150 135 120
105 105 105 105
120 225 120
150
90 90 90 90
105 105
75 40 75
75 75 75 75
90 90
80 150
75
60 120 60 60 225 60
75 75
150
160 300
60 225 60
cd/klm cd/klm cd/klm
45 30 15 0 15 30 45 30 15 0 15 30 30 15 0 15 30
ULOR 29,3% DLOR 52,3% LOR 81,6% ULOR 14,1% DLOR 59,1% LOR 73,3% ULOR 19,8% DLOR 60.72% LOR 80,5%
g GE Lighting 38
FLAT - STRIPLIGHT
Flat
Dimensions (mm) The ultra-slim (only 32 mm) fitting family for 8W and 13W T5 fluorescent lamps
Type L A D H particularly suited for domestic applications, such as on shelves, in the kitchen, benches,
H windows, bookcases, notice boards, etc.
A D FLAT 108 324 70 260 32
L Body: white self-extinguishing polycarbonate.
FLAT 113 552 70 450 32 Diffuser: polycarbonate with internal prismatic reeding. Snap fits to base.
Starter: inside the fitting. Replaceable.
N° and Lamp Weight Pack Qty. Product Control gear and electric circuit: 230V 50Hz without power factor correction, silicon
Type Type (kg) Box Pallet Code sleeves. All luminaires are fitted with switch and terminal block with 2.5 mm2 clamping
screws.
FLAT Class: I IP 40 Cable entry: through special lateral holes in body with grommet.
230V 50Hz CEI 34.21 / EN 60598-1 Fittings are supplied with /33 COOL WHITE 4000 K fluorescent lamps.
FLAT 108 L 1 x F8 T5 0,64 6/1 660 7004128
FLAT 113 L 1 x F13 T5 0,64 6/1 462 7004129
L = without power factor correction - Complete with lamp.
Type
N° and Lamp
Type
Weight
(kg)
Pack Qty.
Box Pallet
Product
Code
Electronic FLAT
M M
Electronic version features the following advantages:
Electronic FLAT Class: IP 40 • Instant lamp starting.
230V 50Hz CEI 34.21 / EN 60598-1 • Energy saving up to 20% compared to the standard one, thanks to the lower installed
FLAT 108 EB L 1 x F8 T5 0,35 6/1 660 39391 power.
FLAT 113 EB L 1 x F13 T5 0,40 6/1 462 39392 • Lower heat emission.
L = without power factor correction - Complete with lamp. • No light flicker or stroboscopic effect, thereby enhancing eyes comfort.
• No magnetic fields.
• Silent operation.
Striplight
Indoor luminaires for 35-100W TUNGSRALIN incandescent striplight lamps with 2xS14s
cap.
Body: steel sheet with white enamel coating.
Lampholder: aminoplast resin.
Installation and connection:
– Position the luminaire on the ceiling or on the wall and mark the two drilling points.
– Drill the two holes in the wall and fit the two plugs.
– Connect the supply cable into the terminal block.
– Position the luminaire against the wall and tighten the expansion screws fully.
– Carefully put the lamp into the lampholder.
Dimensions (mm)
Pack Qty. Product
Type Lamp Box Code
STRIPLIGHT Class: IP 40
11 ÖVE 230V 50Hz EN 60598-1 & 2
STRIP E1/60-35 TU 35W S14S 30 cm 10/1 512617
STRIP E1/60-60 TU 60W S14S 30 cm 10/1 512618
STRIP E2/100-60 TU 60W S14S 50 cm 10/1 512619
STRIP E2/100-100 TU 100W S14S 50 cm 10/1 512620
Complete with lamp.
g GE Lighting 39
STYLO
Ultra-slim fluorescent luminaire family specially designed for home lighting and commercial
applications (shelving, display cabinets, vending machines, etc.). All luminaires are fitted
with diffuser and switch.
In addition to versions with standard wiring, the range includes versions with electronic,
too.
Body and cover: cold-pressed 5/10 mm sheet steel stove enamelled with white or black
epoxy-polyester powder paint following phosphate bonderisation. The cover snap fits into
the body.
Diffuser: impact resistant polycarbonate with clear finish and internal prismatic reeding.
Click fits into base.
Lampholder, end caps and end cap covers: impact resistant polycarbonate. End caps
are pressure-fit in sheet metal body; lampholder and end cap covers clip-fit on the end caps
to ensure IP 40.
Starter: housed in the luminaire.
Control gear and electric circuit: 230V 50Hz, wires with silicon sleeves. All luminaires
are fitted with a switch and a terminal block with 2.5mm2 clamping screws.
Cable entry: through hole in body with grommet or push through perforations in end caps.
The luminaires are supplied complete with /33 COOL WHITE 4000K fluorescent
lamps.
g GE Lighting 40
EUROSTYLO
POLYLUX XL
Enhanced colour
rendering
Fluorescent luminaire family of reduced section, particularly suitable for both domestic
and general lighting (shelves, shop-windows, automatic distributors, etc.). Available
range in 7 versions as for length and power.
Body and cover: 5/10 mm thick, cold-profiled, previously phosphated pressed sheet
steel with black or white stoved epoxy-polyester powder paint finish. The cover is
attached to the body with a lock.
Diffuser: opal polycarbonate. Clip-fits on body.
Lampholder, end caps and end cap covers: polycarbonate. End caps are pressure-fit
in sheet metal body; lampholder and end cap covers clip-fit on the end caps to ensure
IP 40.
Starter: housed in the luminaire.
Control gear and electric circuit: 230V 50Hz, wires with silicon sleeves.
All luminaires are fitted with a switch and a terminal block with 2,5mm2 clamping
screws.
Cable entry: through special hole in body with grommet or push-through perforations in
end caps.
Electronic EUROSTYLO
N° and Lamp Weight Pack Qty. Product
Electronic version features the following advantages:
Type Type (kg) Box Pallet Code
• Instant lamp starting.
• Energy saving up to 20% compared to the standard one, thanks to the lower installed Electronic EUROSTYLO Class: I IP 40
power.
230V 50Hz CEI 34.21 / EN 60598-1
• Lower heat emission.
• Fittings are power factor corrected (no extra expense for correction parts). EST 118 EB WH 1 x F18 T8 1,10 6/1 540 38446
• No light flicker or stroboscopic effect, thereby enhancing eyes comfort. EST 130 EB WH 1 x F30 T8 1,40 6/1 270 38447
• No magnetic fields. EST 136 EB WH 1 x F36 T8 1,70 6/1 270 38448
• Silent operation. EST 158 EB WH 1 x F58 T8 2,40 6/1 270 38449
Complete with lamp - WH = white
g GE Lighting 41
Photometric data
5500/418/5 5500/236/5
POLAR DIAGRAM NORMAL EFFICIENCY POLAR DIAGRAM NORMAL EFFICIENCY
OF OUTPUT ULOR 0.000 DLOR 0.588 LOR 0.588 OF OUTPUT ULOR 0.008 DLOR 0.564 LOR 0.572
(cd/1000 lm) CIE FLUX CODE (cd/1000 lm) CIE FLUX CODE
90° 90°
CIE FLUX CODE 56 87 96 100 58 CIE FLUX CODE 56 87 96 98 57
C 180° C 180°
180.0° 0.0°
180.0° 0.0°
0° SPACING - HEIGHT RATIO 0° SPACING - HEIGHT RATIO
90.0° 270.0° 90.0° 270.0°
SHR NOM 1.50 SHR MAX 1.63 SHR MAX TR 1.91 SHR NOM 1.50 SHR MAX 1.63 SHR MAX TR 1.90
270° 270°
γ°
UTILISATION FACTOR – UF (Floor) γ°
UTILISATION FACTOR – UF (Floor)
REFLECTION FACTOR ROOM INDEX REFLECTION FACTOR ROOM INDEX
120 135 150 180 120 135 150 180
Ceiling Walls Floor 1.00 1.50 2.00 3.00 4.00 5.00 Ceiling Walls Floor 1.00 1.50 2.00 3.00 4.00 5.00
105 105
0.70 0.50 0.10 0.428 0.488 0.519 0.554 0.572 0.583 0.70 0.50 0.10 0.417 0.474 0.504 0.537 0.554 0.565
0.30 0.394 0.459 0.495 0.535 0.556 0.570 0.30 0.385 0.446 0.480 0.518 0.539 0.552
0.10 0.369 0.436 0.474 0.518 0.542 0.558 0.10 0.360 0.424 0.461 0.502 0.525 0.540
90 90
0.50 0.50 0.10 0.420 0.478 0.509 0.542 0.559 0.571 0.50 0.50 0.10 0.408 0.463 0.492 0.524 0.541 0.551
0.30 0.390 0.453 0.488 0.525 0.546 0.560 75
0.30 0.380 0.440 0.472 0.508 0.528 0.541
75
0.10 0.367 0.433 0.469 0.511 0.534 0.549 0.10 0.357 0.420 0.455 0.495 0.517 0.531
75 75
0.30 0.50 0.10 0.412 0.469 0.499 0.531 0.548 0.559 0.30 0.50 0.10 0.400 0.453 0.482 0.513 0.528 0.539
150 150
0.30 0.386 0.447 0.481 0.517 0.537 0.550 0.30 0.375 0.433 0.464 0.499 0.518 0.530
0.10 0.365 0.429 0.465 0.505 0.527 0.541 0.10 0.355 0.415 0.449 0.487 0.508 0.521
60 225 60 225
0.70 0.50 0.20 0.442 0.509 0.545 0.586 0.608 0.622 0.70 0.50 0.20 0.430 0.494 0.529 0.568 0.589 0.602
0.30 0.404 0.474 0.515 0.561 0.587 0.605 0.30 0.393 0.461 0.500 0.544 0.569 0.586
300 0.10 0.375 0.448 0.490 0.540 0.569 0.589 300 0.10 0.366 0.435 0.476 0.524 0.552 0.571
0.50 0.50 0.20 0.431 0.494 0.527 0.565 0.585 0.597 0.50 0.50 0.20 0.419 0.478 0.510 0.546 0.565 0.577
cd/klm 0.30 0.397 0.464 0.502 0.544 0.568 0.583 cd/klm 0.30 0.386 0.450 0.486 0.527 0.549 0.563
30 15 0 30 15 0
0.10 0.371 0.440 0.480 0.527 0.553 0.570 0.10 0.361 0.428 0.465 0.510 0.535 0.551
5500/418/6 5500/236/6
POLAR DIAGRAM NORMAL EFFICIENCY POLAR DIAGRAM NORMAL EFFICIENCY
OF OUTPUT ULOR 0.000 DLOR 0.717 LOR 0.717 OF OUTPUT ULOR 0.008 DLOR 0.591 LOR 0.599
(cd/1000 lm) CIE FLUX CODE (cd/1000 lm) CIE FLUX CODE
90° 90°
CIE FLUX CODE 61 91 98 100 71 CIE FLUX CODE 65 92 98 98 59
C 180° C 180°
180.0° 0.0°
0° SPACING - HEIGHT RATIO 180.0° 0.0°
0° SPACING - HEIGHT RATIO
90.0° 270.0° 90.0° 270.0°
SHR NOM 1.25 SHR MAX 1.40 SHR MAX TR 1.56 SHR NOM 1.25 SHR MAX 1.31 SHR MAX TR 1.55
270° 270°
UTILISATION FACTOR – UF (Floor) UTILISATION FACTOR – UF (Floor)
γ° γ°
REFLECTION FACTOR ROOM INDEX REFLECTION FACTOR ROOM INDEX
120 135 150 180 120 135 150 180
Ceiling Walls Floor 1.00 1.50 2.00 3.00 4.00 5.00 Ceiling Walls Floor 1.00 1.50 2.00 3.00 4.00 5.00
105 105 0.70 0.50 0.10 0.454 0.510 0.539 0.571 0.588 0.598
0.70 0.50 0.10 0.530 0.602 0.641 0.682 0.704 0.717
0.30 0.490 0.569 0.612 0.660 0.686 0.702 0.30 0.423 0.484 0.517 0.554 0.574 0.586
0.10 0.459 0.542 0.589 0.641 0.670 0.688 0.10 0.399 0.463 0.498 0.539 0.561 0.575
90 90
0.50 0.50 0.10 0.520 0.591 0.628 0.668 0.689 0.701 0.50 0.50 0.10 0.445 0.499 0.528 0.558 0.574 0.584
0.30 0.485 0.562 0.604 0.649 0.674 0.689 0.30 0.418 0.477 0.509 0.543 0.562 0.574
100 100
0.10 0.457 0.538 0.583 0.633 0.660 0.677 0.10 0.396 0.458 0.492 0.531 0.552 0.565
75 75
0.30 0.50 0.10 0.511 0.580 0.616 0.655 0.675 0.688 0.30 0.50 0.10 0.437 0.489 0.517 0.547 0.562 0.571
200 200
0.30 0.480 0.554 0.595 0.640 0.663 0.677 0.30 0.413 0.470 0.500 0.534 0.552 0.563
0.10 0.455 0.533 0.577 0.625 0.652 0.667 0.10 0.394 0.453 0.486 0.523 0.543 0.555
60 300 300 0.70 0.50 0.20 0.469 0.532 0.566 0.604 0.624 0.637
0.70 0.50 0.20 0.547 0.628 0.673 0.722 0.747 0.764 60
0.30 0.501 0.588 0.637 0.693 0.724 0.744 0.30 0.433 0.499 0.538 0.581 0.606 0.621
400 0.10 0.467 0.556 0.608 0.669 0.704 0.726 400 0.10 0.406 0.474 0.514 0.562 0.589 0.607
0.50 0.50 0.20 0.534 0.610 0.651 0.696 0.720 0.734 0.50 0.50 0.20 0.457 0.515 0.547 0.581 0.600 0.611
cd/klm 0.30 0.493 0.575 0.621 0.673 0.701 0.718 cd/klm 0.30 0.425 0.488 0.523 0.563 0.585 0.598
30 15 0 30 15 0 0.10 0.401 0.466 0.503 0.547 0.571 0.587
0.10 0.462 0.547 0.596 0.652 0.684 0.704
5500/418/12 5500/236/12
POLAR DIAGRAM NORMAL EFFICIENCY POLAR DIAGRAM NORMAL EFFICIENCY
OF OUTPUT ULOR 0.000 DLOR 0.655 LOR 0.655 OF OUTPUT ULOR 0.008 DLOR 0.583 LOR 0.591
(cd/1000 lm) CIE FLUX CODE (cd/1000 lm) CIE FLUX CODE
90° 90°
CIE FLUX CODE 55 90 97 100 65 CIE FLUX CODE 60 92 98 98 59
C 180° C 180°
180.0° 0.0° 180.0° 0.0°
0° SPACING - HEIGHT RATIO 0° SPACING - HEIGHT RATIO
90.0° 270.0° 90.0° 270.0°
SHR NOM 1.50 SHR MAX 1.59 SHR MAX TR 2.32 SHR NOM 1.75 SHR MAX 1.95 SHR MAX TR 2.11
270° 270°
γ°
UTILISATION FACTOR – UF (Floor) UTILISATION FACTOR – UF (Floor)
γ°
REFLECTION FACTOR ROOM INDEX REFLECTION FACTOR ROOM INDEX
120 135 150 180 120 135 150 180
Ceiling Walls Floor 1.00 1.50 2.00 3.00 4.00 5.00 Ceiling Walls Floor 1.00 1.50 2.00 3.00 4.00 5.00
105 105
0.70 0.50 0.10 0.477 0.547 0.583 0.621 0.640 0.653 0.70 0.50 0.10 0.471 0.519 0.545 0.572 0.586 0.595
0.30 0.440 0.516 0.556 0.600 0.624 0.639 0.30 0.444 0.496 0.526 0.557 0.574 0.584
0.10 0.411 0.491 0.534 0.582 0.609 0.626 0.10 0.424 0.478 0.509 0.544 0.563 0.574
90 90
0.50 0.50 0.10 0.468 0.536 0.571 0.608 0.627 0.639 0.50 0.50 0.10 0.463 0.509 0.534 0.560 0.573 0.581
75
0.30 0.435 0.509 0.548 0.590 0.613 0.627 0.30 0.440 0.490 0.518 0.547 0.563 0.573
75
0.10 0.409 0.487 0.529 0.575 0.600 0.616 0.10 0.421 0.473 0.503 0.536 0.553 0.565
75 75
0.30 0.50 0.10 0.460 0.526 0.560 0.596 0.614 0.626 0.30 0.50 0.10 0.456 0.500 0.524 0.548 0.561 0.569
150 150
0.30 0.430 0.502 0.540 0.581 0.603 0.616 0.30 0.435 0.483 0.510 0.537 0.553 0.562
0.10 0.407 0.483 0.523 0.568 0.592 0.607 0.10 0.418 0.469 0.497 0.528 0.545 0.555
60 225 60 225
0.70 0.50 0.20 0.493 0.570 0.611 0.657 0.680 0.696 0.70 0.50 0.20 0.487 0.541 0.572 0.605 0.623 0.634
0.30 0.450 0.533 0.579 0.630 0.658 0.677 0.30 0.455 0.513 0.547 0.584 0.606 0.620
300 0.10 0.418 0.503 0.552 0.608 0.639 0.661 300 0.10 0.430 0.490 0.526 0.567 0.591 0.607
0.50 0.50 0.20 0.480 0.553 0.592 0.633 0.655 0.669 0.50 0.50 0.20 0.475 0.526 0.554 0.583 0.599 0.608
cd/klm 0.30 0.443 0.521 0.564 0.611 0.637 0.653 cd/klm 0.30 0.447 0.502 0.533 0.566 0.585 0.597
30 15 0 30 15 0
0.10 0.414 0.495 0.541 0.592 0.621 0.640 0.10 0.426 0.482 0.515 0.552 0.573 0.586
5500/418/16 5500/236/16
POLAR DIAGRAM NORMAL EFFICIENCY POLAR DIAGRAM NORMAL EFFICIENCY
OF OUTPUT ULOR 0.000 DLOR 0.654 LOR 0.654 OF OUTPUT ULOR 0.000 DLOR 0.630 LOR 0.630
(cd/1000 lm) CIE FLUX CODE (cd/1000 lm) CIE FLUX CODE
90° 90°
CIE FLUX CODE 65 96 99 100 65 CIE FLUX CODE 62 96 98 100 63
C 180° C 180°
180.0° 0.0°
0° SPACING - HEIGHT RATIO 180.0° 0.0°
0° SPACING - HEIGHT RATIO
90.0° 270.0° 90.0° 270.0°
SHR NOM 1.50 SHR MAX 1.59 SHR MAX TR 2.01 SHR NOM 1.50 SHR MAX 1.59 SHR MAX TR 2.01
270° 270°
UTILISATION FACTOR – UF (Floor) UTILISATION FACTOR – UF (Floor)
γ° γ°
REFLECTION FACTOR ROOM INDEX REFLECTION FACTOR ROOM INDEX
120 135 150 180 120 135 150 180
Ceiling Walls Floor 1.00 1.50 2.00 3.00 4.00 5.00 Ceiling Walls Floor 1.00 1.50 2.00 3.00 4.00 5.00
105 105
0.70 0.50 0.10 0.522 0.580 0.609 0.639 0.654 0.664 0.70 0.50 0.10 0.551 0.587 0.609 0.631 0.642 0.648
0.30 0.492 0.555 0.588 0.623 0.641 0.653 0.30 0.530 0.569 0.594 0.619 0.632 0.640
0.10 0.469 0.535 0.571 0.609 0.630 0.643 0.10 0.513 0.554 0.581 0.608 0.623 0.632
90 90
0.50 0.50 0.10 0.514 0.571 0.598 0.627 0.641 0.651 0.50 0.50 0.10 0.545 0.579 0.600 0.620 0.630 0.636
0.30 0.487 0.549 0.581 0.613 0.631 0.642 0.30 0.526 0.563 0.587 0.609 0.622 0.630
75 100
0.10 0.466 0.531 0.565 0.602 0.621 0.633 0.10 0.511 0.550 0.575 0.601 0.614 0.623
75 75
0.30 0.50 0.10 0.507 0.561 0.588 0.616 0.630 0.639 0.30 0.50 0.10 0.539 0.571 0.591 0.610 0.619 0.625
150 200
0.30 0.483 0.543 0.573 0.605 0.621 0.631 0.30 0.522 0.557 0.580 0.601 0.612 0.619
0.10 0.464 0.527 0.560 0.594 0.613 0.624 0.10 0.508 0.546 0.570 0.593 0.606 0.614
60 225 0.70 0.50 0.20 0.539 0.605 0.639 0.676 0.695 0.708 60 300 0.70 0.50 0.20 0.569 0.613 0.639 0.667 0.682 0.691
0.30 0.503 0.574 0.612 0.654 0.677 0.693 0.30 0.542 0.588 0.618 0.649 0.667 0.679
300 0.10 0.476 0.549 0.590 0.635 0.661 0.679 400 0.10 0.521 0.568 0.600 0.634 0.654 0.668
0.50 0.50 0.20 0.527 0.589 0.620 0.653 0.670 0.681 0.50 0.50 0.20 0.559 0.598 0.622 0.645 0.658 0.666
cd/klm 0.30 0.496 0.562 0.598 0.635 0.656 0.669 cd/klm 0.30 0.535 0.577 0.604 0.631 0.646 0.656
30 15 0 30 15 0
0.10 0.472 0.541 0.578 0.620 0.643 0.658 0.10 0.517 0.560 0.589 0.619 0.636 0.647
g GE Lighting 42
Photometric data
5502 / 234 / C
POLAR DIAGRAM NORMAL EFFICIENCY
OF OUTPUT ULOR 0.000 DLOR 0.454 LOR 0.454
γ°
UTILISATION FACTOR – UF (Floor)
REFLECTION FACTOR ROOM INDEX
120 135 150 180
Ceiling Walls Floor 1.00 1.50 2.00 3.00 4.00 5.00
105
0.70 0.50 0.10 0.313 0.362 0.388 0.416 0.430 0.440
0.30 0.286 0.339 0.368 0.401 0.418 0.429
0.10 0.265 0.321 0.352 0.387 0.407 0.420
90
0.50 0.50 0.10 0.307 0.354 0.379 0.407 0.421 0.430
40 0.30 0.283 0.334 0.363 0.394 0.411 0.422
75
0.10 0.264 0.318 0.348 0.382 0.401 0.413
0.30 0.50 0.10 0.301 0.347 0.372 0.398 0.412 0.421
80
0.30 0.279 0.330 0.357 0.387 0.404 0.414
0.10 0.262 0.315 0.344 0.377 0.396 0.407
60 120
0.70 0.50 0.20 0.323 0.377 0.407 0.440 0.457 0.469
0.30 0.293 0.350 0.383 0.420 0.441 0.455
160 0.10 0.270 0.329 0.363 0.404 0.428 0.443
0.50 0.50 0.20 0.315 0.366 0.393 0.424 0.440 0.450
cd/klm 0.30 0.288 0.342 0.373 0.408 0.427 0.439
30 15 0
0.10 0.267 0.324 0.356 0.394 0.416 0.429
5502 / 234 / L
POLAR DIAGRAM NORMAL EFFICIENCY
OF OUTPUT ULOR 0.000 DLOR 0.404 LOR 0.404
γ°
UTILISATION FACTOR – UF (Floor)
REFLECTION FACTOR ROOM INDEX
120 135 150 180
Ceiling Walls Floor 1.00 1.50 2.00 3.00 4.00 5.00
105
0.70 0.50 0.10 0.250 0.298 0.324 0.355 0.371 0.381
0.30 0.222 0.273 0.303 0.338 0.357 0.370
0.10 0.201 0.254 0.285 0.323 0.345 0.359
90
0.50 0.50 0.10 0.244 0.291 0.316 0.346 0.362 0.372
30 0.30 0.219 0.269 0.298 0.332 0.350 0.363
75
0.10 0.199 0.251 0.282 0.319 0.340 0.353
0.30 0.50 0.10 0.238 0.283 0.309 0.338 0.354 0.364
60
0.30 0.216 0.265 0.293 0.326 0.344 0.356
0.10 0.198 0.249 0.279 0.315 0.335 0.348
60 90
0.70 0.50 0.20 0.258 0.311 0.340 0.375 0.394 0.406
0.30 0.227 0.282 0.315 0.355 0.377 0.392
120 0.10 0.204 0.260 0.295 0.337 0.362 0.379
0.50 0.50 0.20 0.250 0.300 0.328 0.360 0.378 0.389
cd/klm 0.30 0.223 0.276 0.307 0.344 0.364 0.378
30 15 0
0.10 0.202 0.256 0.289 0.329 0.352 0.367
NUA 136
POLAR DIAGRAM NORMAL EFFICIENCY
OF OUTPUT ULOR 0.293 DLOR 0.523 LOR 0.816
γ°
UTILISATION FACTOR – UF (Floor)
REFLECTION FACTOR ROOM INDEX
135 150 165 180
Ceiling Walls Floor 0.75 1.00 1.50 2.00 3.00 4.00 5.00
120 225 0.70 0.50 0.10 0.395 0.451 0.531 0.578 0.632 0.662 0.682
0.30 0.341 0.398 0.482 0.534 0.596 0.632 0.656
150 0.10 0.303 0.357 0.443 0.497 0.564 0.605 0.631
105 0.50 0.50 0.10 0.358 0.406 0.476 0.517 0.565 0.592 0.610
75
0.30 0.314 0.362 0.437 0.483 0.537 0.568 0.590
0.10 0.281 0.328 0.405 0.453 0.512 0.547 0.570
90 0.30 0.50 0.10 0.323 0.364 0.424 0.460 0.513 0.527 0.543
0.30 0.287 0.329 0.393 0.433 0.480 0.508 0.526
75 0.10 0.260 0.301 0.368 0.409 0.460 0.491 0.511
75 0.70 0.50 0.20 0.406 0.466 0.554 0.606 0.668 0.704 0.727
150 0.30 0.347 0.407 0.498 0.556 0.626 0.667 0.695
0.10 0.306 0.362 0.455 0.514 0.589 0.635 0.667
225 0.50 0.50 0.20 0.366 0.417 0.492 0.536 0.589 0.619 0.639
60
cd/klm 0.30 0.318 0.369 0.448 0.497 0.556 0.591 0.615
45 30 15 0 0.10 0.283 0.332 0.412 0.463 0.527 0.566 0.592
NUA 236
POLAR DIAGRAM NORMAL EFFICIENCY
OF OUTPUT ULOR 0.141 DLOR 0.591 LOR 0.733
g GE Lighting 43
MULTILITE System 8000
MULTILITE System 8000
MULTILITE System 8000 is an extremely compact single and twin lamp
lighting system, specially created to facilitate the design of modern
interior lighting schemes.
Made of aluminium, modules and joints all have the same section,
bringing continuity to the entire installation.
The modular design of the system and wide variety of light sources
available offer an infinite variety of application solutions that are ideal
for meeting the varied demands of offices, banks, shops, libraries, etc.
The new connecting module Cat. No. 3179 can connect System 8000
and System 3000 elements while the new louvre (Cat. No. 3004) of
System 3000 is ideal for work environments with video display
terminals.
g GE Lighting 44
MULTILITE System 8000
Technical Characteristics
Modules: extruded aluminium with stoved painted finish in 3 standard colours.
End cap and joints: die-cast aluminium, complete with internal connectors, with stoved
painted finish in 3 standard colours.
Internal reflectors: polished aluminium with polyester protection film.
Diffusers: methacrylate with prismatic internal reeding.
Louvre: polycarbonate.
Compliance with standards: IEC 34.21- EN 60598-1.
Wired module with power factor correction for one T8 fluorescent lamp.
90.0° 270.0°
270° 8001 118 RD 1100 2,20 1 38084
γ° 180 150 135 120
105 105 8001 118 BK 1100 2,20 1 38085
90 90
8001 136 WH 1650 2,90 1 38086
50 8001 136 RD 1650 2,90 1 38087
75 75
100 8001 136 BK 1650 2,90 1 38088
60 150 60
8001 158 WH 2200 4,20 1 38089
40 200
8001 158 RD 2200 4,20 1 38090
cd/klm
Wired module with power factor correction for twoT8 fluorescent lamps.
180.0°
C
0.0°
0° 8002 218 WH 1100 2,80 1 38093
90.0° 270.0°
270°
8002 218 RD 1100 2,80 1 38094
γ° 180 150 135 120
105 105
8002 218 BK 1100 2,80 1 38095
90 90 8002 236 WH 1650 3,50 1 38096
75
75
8002 236 RD 1650 3,50 1 38097
75
150
8002 236 BK 1650 3,50 1 38098
60 225 60
8002 258 WH 2200 6,00 1 38099
40 300
8002 258 RD 2200 6,00 1 38101
cd/klm
120 30 15 0 15 30
8002 258 BK 2200 6,00 1 38102
ULOR 4,3% DLOR 84,4% LOR 88,7%
Without lamp.
Wired module with power factor correction and electronic supply unit for T8 fluorescent lamps.
g GE Lighting
WH = white RD = red BK = black
45
MULTILITE System 8000
Length Weight Pack Product
Type (mm) (kg) Qty. Code
Emergency lighting module for fluorescent lamp with EES unit for permanent illumination (duration 1 h),
Module with 230V electrified track for Guzzini, Erco, Staff, Hoffmeister, Nokia spotlights with adapters
(without spotlights and lamps).
Cat. No. 8018 Class: I
40 230V 50Hz
120
8018 WH 1100 3,80 1 38126
8018 RD 1100 3,80 1 38127
8018 BK 1100 3,80 1 38128
g GE Lighting 46
WH = white RD = rred BK = black
MULTILITE System 8000
Length Weight Pack Product
Type (mm) (kg) Qty. Code
Clip-fit polycarbonate louvre with metal finish. “T” joint complete with internal connectors.
Cat. No. 8149 140
Cat. No. 8174
8149 2 1-2 x 18 12/1 38151 8174 WH 10/1 38180
40 160
8149 4 1-2 x 36 7/1 38152 8174 RD 10/1 38186
120 8149 5 1-2 x 36 5/1 38153 8174 BK 10/1 38188
Clip-fit opal polycarbonate louvre. “X” joint complete with internal connectors.
Clip-fit metacrylate diffuser, Protection level increase 90° ÷ 270° adjustable horizontal joint complete with
from IP 20 to IP 40. internal connectors.
140
Cat. No. 8151 Cat. No. 8176
8151 2 1-2 x 18 4/1 38162 8176 WH 7/1 38192
40
8151 4 1-2 x 36 4/1 38163 8176 RD 7/1 38193
120
8151 5 1-2 x 36 4/1 38164 8176 BK 7/1 38194
90°÷ 270°
Front cover glass for Cat. No. 8022 - 8300 - 8400. Straight internal connector for connecting modules.
End cap complete with cable entry and internal Rotating straight joint complete with end caps with
connectors. internal connectors and wall/ceiling mounting bracket.
Cat. No. 8171 Cat. No. 8184
360°
50 8171 WH 25/1 38170 8184 WH 12/1 38236
40
40 8171 RD 25/1 38171 40 8184 RD 12/1 38237
18 120 8171 BK 25/1 38172 80 120 8184 BK 12/1 38238
Ø 50
Horizontal 90° joint complete with internal Ceiling suspension set complete with 2m steel
connectors. cable, mounting pin and ceiling rose.
2000
Cat. No. 8173 Cat. No. 8186
8173 WH 12/1 38177 8186 WH 40/1 38226
140
8173 RD 12/1 38178 8186 RD 40/1 38227
8173 BK 12/1 38179 8186 BK 40/1 38228
g GE Lighting 48
WH = white RD = rred BK = black
MULTILITE System 8000
With Pack Product With Pack Product
Type Luminaire Qty. Code Type Luminaire Qty. Code
360°
Cat. No. 6169
Equaliser for modules. Ø 60 6169 WH 10/1 38316
Ø 40 5
Cat. No. 8188 37
40 6169 RD 10/1 38317
8188 100/1 38231 120 6169 BK 10/1 38318
Electrical connection
All pre-wired modules feature a four-pole terminal block at both ends suitable for hard
wire or flexible cables with a section of up to 2.5 mm2.
L1 = module power supply through line.
L2 = through line for separate switching only.
N = neutral through line.
Control gear: 230V 50Hz, heat-resistant 1.5 mm2 cables.
Mechanical connection
Straight extruded aluminium modules are connected to one another using accessory
Cat. No. 8178.
g GE Lighting
WH = white RD = rred BK = black
49
MULTILITE System 8000 FREE-STANDING –
WALL-MOUNTED UPLIGHT
Ø 50
8300 RD 7,00 1 38367
8300 BK 7,00 1 38254
Complete with lamp.
250 120
Cat. No. 8400 IP 20
230V 50Hz CEI 34.21 / EN 60598-1
8400 WH 0,60 1 38368
8400 RD 0,60 1 38369
8400 BK 0,60 1 38370
Complete with lamp.
g GE Lighting 50
WH = white RD = red BK = black
Photometric data
8001.136 8002.236
POLAR DIAGRAM NORMAL EFFICIENCY POLAR DIAGRAM NORMAL EFFICIENCY
OF OUTPUT ULOR 0.046 DLOR 0.850 LOR 0.896 OF OUTPUT ULOR 0.043 DLOR 0.844 LOR 0.888
(cd/1000 lm) CIE FLUX CODE (cd/1000 lm) CIE FLUX CODE
90° 90°
CIE FLUX CODE 37 67 87 94 89 CIE FLUX CODE 45 74 91 95 88
C 180° C 180°
180.0° 0.0° 180.0° 0.0°
0° SPACING – HEIGHT RATIO 0° SPACING – HEIGHT RATIO
90.0° 270.0° 90.0° 270.0°
SHR NOM 1.75 SHR MAX 1.85 SHR MAX TR 2.39 SHR NOM 1.50 SHR MAX 1.53 SHR MAX TR 1.67
270° 270°
UTILISATION FACTOR – UF (Floor) γ°
UTILISATION FACTOR – UF (Floor)
γ°
REFLECTION FACTOR ROOM INDEX REFLECTION FACTOR ROOM INDEX
120 135 150 180 120 135 150 180
Ceiling Walls Floor 0.75 1.00 1.50 2.00 3.00 4.00 5.00 Ceiling Walls Floor 0.75 1.00 1.50 2.00 3.00 4.00 5.00
105 105
0.70 0.50 0.10 0.452 0.520 0.623 0.683 0.752 0.790 0.816 0.70 0.50 0.10 0.497 0.562 0.659 0.713 0.776 0.811 0.833
0.30 0.384 0.451 0.561 0.626 0.705 0.751 0.782 0.30 0.436 0.501 0.604 0.665 0.737 0.778 0.805
0.10 0.334 0.398 0.510 0.579 0.664 0.715 0.750 0.10 0.391 0.453 0.560 0.624 0.702 0.748 0.779
90 90
0.50 0.50 0.10 0.435 0.500 0.599 0.656 0.723 0.761 0.786 0.50 0.50 0.10 0.481 0.543 0.636 0.689 0.750 0.783 0.805
0.30 0.375 0.439 0.545 0.607 0.683 0.727 0.757 0.30 0.427 0.489 0.589 0.647 0.716 0.755 0.781
50 75
0.10 0.329 0.392 0.500 0.566 0.648 0.696 0.730 0.10 0.386 0.447 0.550 0.611 0.686 0.730 0.759
75 75
0.30 0.50 0.10 0.420 0.481 0.576 0.631 0.698 0.733 0.758 0.30 0.50 0.10 0.467 0.526 0.615 0.665 0.726 0.757 0.778
100 150
0.30 0.366 0.427 0.529 0.589 0.662 0.705 0.733 0.30 0.419 0.478 0.574 0.630 0.696 0.734 0.758
0.10 0.324 0.385 0.489 0.553 0.631 0.678 0.710 0.10 0.381 0.440 0.540 0.599 0.670 0.712 0.740
60 150 0.70 0.50 0.20 0.464 0.537 0.651 0.716 0.795 0.840 0.870 60 225 0.70 0.50 0.20 0.510 0.580 0.687 0.748 0.821 0.861 0.888
0.30 0.391 0.462 0.579 0.651 0.740 0.793 0.829 0.30 0.443 0.512 0.624 0.692 0.774 0.821 0.854
200 0.10 0.338 0.405 0.524 0.598 0.693 0.751 0.792 300 0.10 0.395 0.461 0.574 0.644 0.733 0.786 0.822
0.50 0.50 0.20 0.445 0.513 0.619 0.680 0.753 0.795 0.823 0.50 0.50 0.20 0.492 0.557 0.657 0.714 0.780 0.818 0.842
cd/klm 0.30 0.380 0.447 0.558 0.625 0.707 0.756 0.788 cd/klm 0.30 0.433 0.498 0.603 0.666 0.741 0.785 0.814
30 15 0 0.10 0.332 0.396 0.509 0.579 0.667 0.721 0.758 30 15 0
0.10 0.389 0.452 0.560 0.625 0.707 0.756 0.788
(cd/1000 lm) CIE FLUX CODE (cd/1000 lm) CIE FLUX CODE
90° 90°
CIE FLUX CODE 40 71 89 94 57 CIE FLUX CODE 48 78 93 95 69
C 180° C 180°
180.0° 0.0°
180.0° 0.0°
0° SPACING – HEIGHT RATIO 0° SPACING – HEIGHT RATIO
90.0° 270.0° 90.0° 270.0°
SHR NOM 1.75 SHR MAX 1.83 SHR MAX TR 2.41 SHR NOM 1.50 SHR MAX 1.53 SHR MAX TR 1.69
270° 270°
UTILISATION FACTOR – UF (Floor) UTILISATION FACTOR – UF (Floor)
γ° γ°
REFLECTION FACTOR ROOM INDEX REFLECTION FACTOR ROOM INDEX
120 135 150 180 120 135 150 180
Ceiling Walls Floor 0.75 1.00 1.50 2.00 3.00 4.00 5.00 Ceiling Walls Floor 0.75 1.00 1.50 2.00 3.00 4.00 5.00
105 105
0.70 0.50 0.10 0.301 0.344 0.410 0.448 0.491 0.515 0.530 0.70 0.50 0.10 0.407 0.459 0.534 0.575 0.622 0.648 0.664
0.30 0.259 0.302 0.372 0.414 0.463 0.492 0.510 0.30 0.361 0.413 0.494 0.540 0.594 0.624 0.644
0.10 0.228 0.270 0.342 0.385 0.439 0.471 0.492 0.10 0.328 0.378 0.461 0.510 0.569 0.603 0.625
90 90
0.50 0.50 0.10 0.290 0.331 0.395 0.431 0.473 0.496 0.511 0.50 0.50 0.10 0.396 0.445 0.517 0.557 0.602 0.626 0.642
0.30 0.253 0.294 0.362 0.402 0.449 0.476 0.494 0.30 0.355 0.404 0.482 0.526 0.578 0.607 0.626
40 75
0.10 0.225 0.265 0.335 0.377 0.428 0.458 0.479 0.10 0.325 0.373 0.453 0.500 0.557 0.589 0.610
75 75
0.30 0.50 0.10 0.280 0.319 0.380 0.415 0.457 0.478 0.493 0.30 0.50 0.10 0.385 0.431 0.501 0.539 0.584 0.607 0.623
80 150
0.30 0.247 0.286 0.352 0.390 0.436 0.462 0.479 0.30 0.349 0.396 0.471 0.513 0.563 0.590 0.608
0.10 0.221 0.260 0.328 0.368 0.418 0.447 0.466 0.10 0.321 0.368 0.446 0.491 0.544 0.575 0.595
60 120 0.70 0.50 0.20 0.309 0.356 0.428 0.470 0.519 0.547 0.565 60 225 0.70 0.50 0.20 0.418 0.474 0.557 0.604 0.658 0.688 0.708
0.30 0.263 0.309 0.385 0.431 0.486 0.519 0.541 0.30 0.368 0.423 0.510 0.562 0.623 0.659 0.683
160 0.10 0.230 0.274 0.351 0.398 0.458 0.495 0.520 300 0.10 0.331 0.384 0.473 0.527 0.594 0.633 0.660
0.50 0.50 0.20 0.296 0.340 0.408 0.446 0.492 0.518 0.535 0.50 0.50 0.20 0.405 0.456 0.533 0.577 0.627 0.655 0.672
cd/klm 0.30 0.256 0.299 0.371 0.414 0.465 0.495 0.515 cd/klm 0.30 0.360 0.411 0.494 0.542 0.598 0.631 0.652
30 15 0 30 15 0 0.10 0.327 0.377 0.462 0.512 0.574 0.610 0.634
0.10 0.226 0.268 0.341 0.386 0.441 0.475 0.497
(cd/1000 lm) CIE FLUX CODE (cd/1000 lm) CIE FLUX CODE
90° 90°
CIE FLUX CODE 39 70 89 94 73 CIE FLUX CODE 46 75 91 94 81
C 180° C 180°
180.0° 0.0°
0° SPACING – HEIGHT RATIO 180.0° 0.0°
0° SPACING – HEIGHT RATIO
90.0° 270.0° 90.0° 270.0°
SHR NOM 1.75 SHR MAX 1.85 SHR MAX TR 2.38 SHR NOM 1.50 SHR MAX 1.55 SHR MAX TR 1.74
270° 270°
γ°
UTILISATION FACTOR – UF (Floor) UTILISATION FACTOR – UF (Floor)
γ°
REFLECTION FACTOR ROOM INDEX REFLECTION FACTOR ROOM INDEX
120 135 150 180 120 135 150 180
Ceiling Walls Floor 0.75 1.00 1.50 2.00 3.00 4.00 5.00 Ceiling Walls Floor 0.75 1.00 1.50 2.00 3.00 4.00 5.00
105 105
0.70 0.50 0.10 0.380 0.436 0.520 0.569 0.625 0.656 0.676 0.70 0.50 0.10 0.462 0.521 0.608 0.658 0.714 0.745 0.765
0.30 0.325 0.381 0.471 0.524 0.588 0.625 0.649 0.30 0.406 0.466 0.560 0.614 0.679 0.715 0.740
0.10 0.286 0.339 0.431 0.487 0.557 0.598 0.625 0.10 0.366 0.423 0.520 0.578 0.648 0.689 0.716
90 90
0.50 0.50 0.10 0.366 0.419 0.500 0.546 0.601 0.630 0.650 0.50 0.50 0.10 0.447 0.503 0.587 0.634 0.688 0.718 0.737
50 0.30 0.318 0.370 0.457 0.508 0.569 0.605 0.629 0.30 0.398 0.454 0.545 0.597 0.658 0.693 0.717
75
0.10 0.281 0.333 0.422 0.475 0.542 0.581 0.608 0.10 0.361 0.417 0.510 0.565 0.632 0.671 0.697
75 75
0.30 0.50 0.10 0.353 0.403 0.481 0.525 0.579 0.607 0.627 0.30 0.50 0.10 0.433 0.486 0.566 0.611 0.666 0.693 0.712
100 150
0.30 0.310 0.360 0.444 0.493 0.552 0.586 0.608 0.30 0.389 0.443 0.530 0.580 0.639 0.672 0.694
0.10 0.277 0.326 0.413 0.464 0.528 0.566 0.590 0.10 0.356 0.410 0.499 0.552 0.616 0.653 0.677
60 150 60 225 0.70 0.50 0.20 0.474 0.538 0.635 0.690 0.755 0.791 0.815
0.70 0.50 0.20 0.390 0.450 0.543 0.597 0.661 0.697 0.720
0.30 0.331 0.390 0.486 0.545 0.618 0.660 0.689 0.30 0.414 0.477 0.578 0.639 0.713 0.755 0.784
200 0.10 0.289 0.344 0.442 0.503 0.581 0.628 0.660 300 0.10 0.370 0.430 0.533 0.597 0.676 0.724 0.756
0.50 0.50 0.20 0.374 0.430 0.516 0.566 0.625 0.659 0.681 0.50 0.50 0.20 0.457 0.516 0.606 0.657 0.717 0.750 0.772
cd/klm 0.30 0.322 0.377 0.468 0.523 0.590 0.629 0.655 cd/klm 0.30 0.403 0.462 0.558 0.614 0.682 0.721 0.746
30 15 0 30 15 0
0.10 0.283 0.336 0.429 0.487 0.559 0.602 0.631 0.10 0.364 0.422 0.519 0.578 0.651 0.695 0.723
(cd/1000 lm) CIE FLUX CODE (cd/1000 lm) CIE FLUX CODE
90° 90°
CIE FLUX CODE 41 71 89 89 86 CIE FLUX CODE 47 76 92 92 75
C C 180°
180°
180.0° 0.0°
180.0° 0.0°
0° SPACING – HEIGHT RATIO 0° SPACING – HEIGHT RATIO
90.0° 270.0° 90.0° 270.0°
SHR NOM 1.50 SHR MAX 1.67 SHR MAX TR 2.00 SHR NOM 1.25 SHR MAX 1.47 SHR MAX TR 1.62
270° 270°
UTILISATION FACTOR – UF (Floor) γ°
UTILISATION FACTOR – UF (Floor)
γ°
REFLECTION FACTOR ROOM INDEX REFLECTION FACTOR ROOM INDEX
120 135 150 180 120 135 150 180
Ceiling Walls Floor 0.75 1.00 1.50 2.00 3.00 4.00 5.00 Ceiling Walls Floor 0.75 1.00 1.50 2.00 3.00 4.00 5.00
105 105
0.70 0.50 0.10 0.451 0.515 0.611 0.665 0.728 0.763 0.785 0.70 0.50 0.10 0.403 0.471 0.553 0.600 0.655 0.684 0.703
0.30 0.390 0.454 0.556 0.616 0.688 0.729 0.756 0.30 0.349 0.419 0.507 0.559 0.621 0.656 0.679
0.10 0.345 0.407 0.511 0.575 0.653 0.699 0.729 0.10 0.310 0.380 0.469 0.525 0.592 0.632 0.657
90 90
0.50 0.50 0.10 0.431 0.491 0.582 0.634 0.694 0.727 0.749 0.50 0.50 0.10 0.387 0.453 0.531 0.576 0.628 0.657 0.675
0.30 0.378 0.438 0.535 0.592 0.660 0.699 0.725 75
0.30 0.340 0.408 0.491 0.541 0.600 0.634 0.655
50
0.10 0.337 0.396 0.496 0.556 0.630 0.673 0.702 0.10 0.305 0.372 0.458 0.511 0.575 0.613 0.637
75 75
0.30 0.50 0.10 0.413 0.469 0.555 0.604 0.665 0.693 0.715 0.30 0.50 0.10 0.374 0.436 0.510 0.553 0.606 0.631 0.649
100 150
0.30 0.366 0.422 0.515 0.569 0.633 0.670 0.694 0.30 0.331 0.396 0.476 0.524 0.580 0.612 0.632
0.10 0.329 0.385 0.481 0.538 0.608 0.648 0.675 0.10 0.299 0.365 0.447 0.498 0.559 0.594 0.617
150 60 225
60 0.70 0.50 0.20 0.463 0.532 0.638 0.698 0.770 0.810 0.837 0.70 0.50 0.20 0.414 0.487 0.577 0.630 0.692 0.727 0.749
0.30 0.397 0.464 0.574 0.641 0.722 0.770 0.802 0.30 0.355 0.429 0.523 0.582 0.652 0.693 0.720
200 0.10 0.349 0.413 0.525 0.594 0.681 0.734 0.770 300 0.10 0.313 0.386 0.481 0.542 0.618 0.664 0.694
0.50 0.50 0.20 0.441 0.504 0.601 0.657 0.722 0.759 0.784 0.50 0.50 0.20 0.396 0.465 0.548 0.597 0.654 0.686 0.706
cd/klm 0.30 0.383 0.446 0.548 0.609 0.683 0.726 0.755 cd/klm 0.30 0.345 0.415 0.503 0.557 0.621 0.659 0.683
30 15 0 30 15 0
0.10 0.340 0.401 0.505 0.569 0.649 0.697 0.729 0.10 0.307 0.376 0.466 0.523 0.593 0.635 0.661
g GE Lighting 51
MULTILITE System 6000
MULTILITE System 6000 is an extremely cost-effective single lamp
(Ø 60 mm) lighting system specially made to facilitate the design of
modern lighting schemes.
Manufactured of aluminium, modules and joints of the same section,
bringing continuity to the entire installation.
The modular design of the system and wide variety of light sources
available make it possible to create an infinite variety of application
solutions that are ideal for meeting the varied demands of offices,
banks, shops, libraries, etc.
g GE Lighting 52
MULTILITE Systema 6000
Technical Characteristics
Modules: extruded aluminium with stoved paint finish in three standard colours.
End caps and joints: die cast aluminium with internal connectors; stoved paint finish in
three standard colours.
Internal reflectors: mirror-finish pre-anodised 99.99% pure aluminium.
Diffusers: methacrylate diffuser with internal longitudinal prismatic reeding.
Louvre: polycarbonate.
Compliance with standards: IEC 34.21 – EN 60598-1.
Wired module with power factor correction for one T8 fluorescent lamp.
Module for 2x50W 12V halogen lamps with GY6.35 cap, complete with 230V 50Hz electromagnetic
transformer.
Cat. No. 6015 Class: I IP 40
230V 50Hz
6015 250 WH 600 1,30 1 38371
6015 250 RD 600 1,30 1 38372
Ø 60
6015 250 BK 600 1,30 1 38373
Without lamp.
Module of 230V electrified track for Guzzini, Erco, Staff, Hoffmeister and Nokia luminaires (not
included).
Cat. No. 6018 Class: I
230V 50Hz
6018 WH 1500 2,60 1 38266
6018 RD 1500 2,60 1 38267
Ø 60
6018 BK 1500 2,60 1 38268
Emergency lighting module for fluorescent lamp with EES unit for permanent illumination
(duration 1 h).
Cat. No. 6030 Class: I
230V 50Hz IP 40 with diffuser Cat. No. 6151
6030 118 WH 1500 1,00 1 38276
6030 118 RD 1500 1,00 1 38280
Ø 60
6030 118 BK 1500 1,00 1 38281
Without lamp.
g GE Lighting
WH = white RD = red BK = black
53
MULTILITE Systema 6000
Length Weight Pack Product
Type (mm) (kg) Qty. Code
Structural compensation module (can be opened for inspection), complete with reduction rings for ends.
6101 1 38299
Ø 60
360°
Cat. No. 6169 Cat. No. 6173
Ø 60 6169 WH 10/1 38316 6173 WH 10/1 38330
80
37
40 6169 RD 10/1 38317 6173 RD 10/1 38331
120 6169 BK 10/1 38318 Ø 60 6173 BK 10/1 38332
g GE Lighting
WH = white RD = red BK = black
54
MULTILITE System 6000
With Pack Product With Pack Product
Type Luminaire Qty. Code Type Luminaire Qty. Code
Ø 50
Electrical connection
All ready-wired modules feature a four-pole terminal block at both ends suitable for hard
wire or flexible cables with a section of up to 2.5 mm2.
L1 = module power supply through line.
L2 = through line for separate switching only.
N = neutral through line.
Control gear: 230V 50Hz, heat-resistant cables with section of 1.5 mm2.
Mechanical connection
Straight extruded aluminium modules are connected to one another using accessory
Cat. No. 6178.
g GE Lighting
WH = white RD = red BK = black
55
MULTILITE System 3000
MULTILITE System 3000 has been specially designed for innovative
lighting solutions; unlike conventional systems, it is able to form
continuous installations without a break between one fluorescent lamp
and the next, as well as offering the possibility of combining direct and
indirect lighting in the same module.
Manufactured entirely of aluminium, the modular design and wide choice
of light sources available offer an infinite variety of application solutions,
perfect for offices, banks and shops, etc.
End caps, joints and suspension fittings are the same as those used in
System 6000.
All 3 systems – 3000, 6000 and 8000 ñ can be combined in a single
installation.
g GE Lighting 56
MULTILITE System 3000
Technical Characteristics
Modules: extruded aluminium with stoved paint finish.
End caps and joints: die cast aluminium complete with internal connectors with paint
finish. Cat. No. 3170 in plastic.
Internal reflectors: 99.99% pure pre-anodised aluminium with mirror-finish.
Diffusers: methacrylate with internal longitudinal prismatic reeding.
Louvre: polycarbonate.
Compliance with standards: IEC 34.21 – EN 60598-1. Length Weight Pack Product
Type (mm) (kg) Qty. Code
Wired module with power factor correction for direct lighting with one T8 fluorescent lamp.
100
3002 236 WH 1220 1 38378
3002 236 BK 1220 1 38351
3002 258 WH 1520 1 38379
120
3002 258 BK 1520 1 38352
Without lamp.
Wired module with power factor correction and louvre (illuminance < 200 cd/m2 for vertical angles
above 60°) for one T8 fluorescent lamp.
100
Cat. No. 3004 Class: I IP 20
230V 50Hz IP 40 with diffuser Cat. No. 3151
3004 136 WH 1650 1 38380
120
3004 136 BK 1650 1 38381
Without lamp.
Module for one 300W linear halogen lamp with R7s cap.
100
Cat. No. 3022 Class: I IP 20
230V 50Hz
3022 WH 1 38382
120
3022 BK 1 38383
Without lamp.
Wired module with power factor correction for two fluorescent lamps, complete with EES on one
lamp for permanent lighting (duration 1 h).
100
3100 300 WH 300 1 38385
3100 300 BK 300 1 38354
3100 610 WH 610 1 38387
120
3100 610 BK 610 1 38355
3101 1 38356
WH = white BK = black
g GE Lighting 57
MULTILITE System 3000 With Pack Product
Type Luminaire Qty. Code
With Pack Product
Type Luminaire Qty. Code
Electrical connection
All ready-wired modules are fitted with 5-pole terminal blocks at both ends suitable for
hard or flexible cables with a section of up to 2.5 mm2.
L1 = module power supply through line.
L2 = through line for separate switching only.
L3 = through line for separate switching only.
N = neutral through line.
Control gear: 230V 50Hz, heat-resistant cables with section of 1.5 mm2.
Mechanical connection
Straight extruded aluminium modules are mechanically inter-connected by accessory
Cat. No. 3178.
The straight modules are mechanically connected to the accessories (curved, T and X
joints) by accessory Cat. No. 3169 (joint end cap).
NB: Accessories are the same as those in System 6000 (6170 – 6171 – 6172 – 6173 –
6174 – 6175 – 6176 – 6178 – 6183 – 6184 – 6187) and System 8000 (8186 – 8189 –
8190).
g GE Lighting 58
WH = white BK = black
Applications of MULTILITE, designed by Europic software
System 8000
System 6000
System 3000
g GE Lighting 59
2D Compact Fluorescent Lamps
Biax™ 2D, a great GE product, was first introduced in 1981 to satisfy the
technical needs of architects, interior designers and other style-conscious
specifiers.
Strong optical performance: Whether installed in circular or square format Electrical diagram for 2D 10W, 16W, 21W,
fittings, Biax™ 2D’s continuous light form gives unequalled optical 28W, 38W & 55W (4-pin, without strater).
performance, with all round illuminance.
and the same lamps can be adapted for functional emergency lighting or more starter
ballast
decorative installations. F
10W • •
16W • • • • •
21W • • •
28W • • • •
38W • •
55W • •
g GE Lighting 60
2D Compact Fluorescent Lamps
g GE Lighting 61
BRIO
Luminaire with very high level of protection against the entry of dust and liquids (IP 54),
designed for low power consumption Biax™ 2D compact fluorescent lamps.
Ideal for domestic and commercial applications or for use in hotels, etc. Besides the
standard model, special versions are available with an emergency supply unit.
110 110 110
Body: impact-resistant, self-extinguish polycarbonate.
85 98 115 Reflector: impact-resistant, self-extinguish polycarbonate with high reflective index.
ø363
Diffuser: transparent or opal methacrylate with a diffusing profile.
ø216 ø268
Outer ring: coloured ABS, clip-fits to the body fixing the diffuser and insulation.
10W 16W - 21W 28W - 38W Power supply: 230V 50Hz without power factor correction. Low-loss ballasts for 38W
version.
g GE Lighting 62
BRIO
Weight Pack Qty. Product Weight Pack Qty. Product
Type Lamp (kg) Box Pallet Code Type Lamp (kg) Box Pallet Code
10W with transparent diffuser Class: 0000 IP 54 10W with opal diffuser Class: 0000 IP 54
230V 50Hz CEI 34.21 / EN 60598-1 230V 50Hz CEI 34.21 / EN 60598-1
2D BR 10 WH 2D 10W 4 pin 3500K 1,00 6/1 168 31792 2D BRO 10 WH 2D 10W 4 pin 3500K 1,00 6/1 168 31610
2D BR 10 RD 2D 10W 4 pin 3500K 1,00 6/1 168 31608 2D BRO 10 RD 2D 10W 4 pin 3500K 1,00 6/1 168 31611
2D BR 10 BK 2D 10W 4 pin 3500K 1,00 6/1 168 31609 2D BRO 10 BK 2D 10W 4 pin 3500K 1,00 6/1 168 31622
Complete with lamp. Complete with lamp.
16W with transparent diffuser Class: 0000 IP 54 16W with opal diffuser Class: 0000 IP 54
230V 50Hz CEI 34.21 / EN 60598-1 230V 50Hz CEI 34.21 / EN 60598-1
2D BR 16 WH 2D 16W 4 pin 3500K 1,20 6/1 144 31623 2D BRO 16 WH 2D 16W 4 pin 3500K 1,20 6/1 144 31627
2D BR 16 RD 2D 16W 4 pin 3500K 1,20 6/1 144 31624 2D BRO 16 RD 2D 16W 4 pin 3500K 1,20 6/1 144 31628
2D BR 16 BK 2D 16W 4 pin 3500K 1,20 6/1 144 31626 2D BRO 16 BK 2D 16W 4 pin 3500K 1,20 6/1 144 31630
Complete with lamp. Complete with lamp.
21W with transparent diffuser Class: 0000 IP 54 21W with opal diffuser Class: 0000 IP 54
230V 50Hz CEI 34.21 / EN 60598-1 230V 50Hz CEI 34.21 / EN 60598-1
2D BR 21 WH 2D 21W 4 pin 3500K 1,20 6/1 144 7004163 2D BRO 21 WH 2D 21W 4 pin 3500K 1,20 6/1 144 30036
2D BR 21 RD 2D 21W 4 pin 3500K 1,20 6/1 144 7004165 2D BRO 21 RD 2D 21W 4 pin 3500K 1,20 6/1 144 33596
2D BR 21 BK 2D 21W 4 pin 3500K 1,20 6/1 144 7004166 2D BRO 21 BK 2D 21W 4 pin 3500K 1,20 6/1 144 32181
Complete with lamp. Complete with lamp.
28W with transparent diffuser Class: 0000 IP 54 28W with opal diffuser Class: 0000 IP 54
230V 50Hz CEI 34.21 / EN 60598-1 230V 50Hz CEI 34.21 / EN 60598-1
2D BR 28 WH 2D 28W 4 pin 3500K 1,80 4/1 72 31770 2D BRO 28 WH 2D 28W 4 pin 3500K 1,80 4/1 72 31633
2D BR 28 RD 2D 28W 4 pin 3500K 1,80 4/1 72 31631 2D BRO 28 RD 2D 28W 4 pin 3500K 1,80 4/1 72 31636
2D BR 28 BK 2D 28W 4 pin 3500K 1,80 4/1 72 31632 2D BRO 28 BK 2D 28W 4 pin 3500K 1,80 4/1 72 31642
Complete with lamp. Complete with lamp.
38W with transparent diffuser Class: 0000 IP 54 38W with opal diffuser Class: 0000 IP 54
230V 50Hz CEI 34.21 / EN 60598-1 230V 50Hz CEI 34.21 / EN 60598-1
2D BR 38 WH 2D 38W 4 pin 3500K 1,90 4/1 72 7004295 2D BRO 38 WH 2D 38W 4 pin 3500K 1,90 4/1 72 30327
2D BR 38 RD 2D 38W 4 pin 3500K 1,90 4/1 72 7004296 2D BRO 38 RD 2D 38W 4 pin 3500K 1,90 4/1 72 30331
2D BR 38 BK 2D 38W 4 pin 3500K 1,90 4/1 72 7004297 2D BRO 38 BK 2D 38W 4 pin 3500K 1,90 4/1 72 30332
Complete with lamp. Complete with lamp.
BRIO emergency
Autonomous fitting for emergency lighting either for non permanent operation (10W) or for
permanent operation (16W and 28W), with built-in recharge unit, sealed batteries.
The fitting is powered by mains and operated by switch like a regular light. In the event of
blackout, the luminaire automatically switches to battery power. Regular mains power
supply is indicated by a small lamp (10W) or by a red LED (21 and 28W), which also
indicates that batteries are re-charging.
Batteries: sealed, Ni-Cd 3.6V with 1.2Ah (10W), 2Ah (16W) or 4Ah (28W) capacity.
Emergency operation guaranteed for 1 hour following minimum recharge period of 24 hours
at operating temperature of 25°C.
Inverter: comprises electronic recharging unit, with possibility of inhibiting emergency
operation by connection of terminals 1 and 2 (10W) or 11 and 12 (21W and 28W) to a
remote switch. These two terminals can be disconnected without battery discharge.
Luminaire family for indoor and outdoor applications, offering a high level of protection
110 110
against the entry of dust and liquids (IP 54), designed for low power consumption
80 93 Biax™ 2D compact fluorescent lamps.
ø250 ø325 Body: self-extinguish, impact-resistant polycarbonate.
Reflector: sheet steel with white painted finish.
Diffuser: pressed glass with a sandblasted internal finish for 16W version, satin finish
16W 28W - 38W methacrylate for 28W version.
Outer ring: anti-static coloured ABS.
Power supply: 230V 50Hz without power factor correction.
16W with transparent diffuser Class: I IP 54 16W with opal diffuser Class: I IP 54
230V 50Hz CEI 34.21 / EN 60598-1 230V 50Hz CEI 34.21 / EN 60598-1
2D CL 16 WH 2D 16W 2 pin 2700K 1,40 6/1 144 7004298 2D CLO 16 WH 2D 21W 2 pin 2700K 1,40 6/1 144 32526
2D CL 16 RD 2D 16W 2 pin 2700K 1,40 6/1 144 7004299 2D CLO 16 RD 2D 21W 2 pin 2700K 1,40 6/1 144 38430
2D CL 16 BK 2D 16W 2 pin 2700K 1,40 6/1 144 7004301 2D CLO 16 BK 2D 21W 2 pin 2700K 1,40 6/1 144 34438
Complete with lamp. Complete with lamp.
28W with transparent diffuser Class: I IP 54 28W with opal diffuser Class: I IP 54
230V 50Hz CEI 34.21 / EN 60598-1 230V 50Hz CEI 34.21 / EN 60598-1
2D CL 28 WH 2D 28W 4 pin 3500K 1,90 4/1 108 7004188 2D CLO 28 WH 2D 28W 4 pin 3500K 1,90 4/1 108 30333
2D CL 28 RD 2D 28W 4 pin 3500K 1,90 4/1 108 7004190 2D CLO 28 RD 2D 28W 4 pin 3500K 1,90 4/1 108 37279
2D CL 28 BK 2D 28W 4 pin 3500K 1,90 4/1 108 7004192 2D CLO 28 BK 2D 28W 4 pin 3500K 1,90 4/1 108 33605
Complete with lamp. Complete with lamp.
CLUB emergency
Autonomous luminaire for emergency lighting for permanent operation, with built-in recharge unit and sealed batteries.
The fitting is powered by mains and operated by a remote switch just like a regular light. In the event of blackout, the luminaire automatically switches to battery power. Regular
mains power supply is indicated by a red LED, which also indicates that batteries are re-charging.
Batteries: sealed, Ni-Cd 3.6V with 4Ah capacity. Emergency operation guaranteed for 1 hour following minimum recharge period of 24 hours at operating temperature of 25°C.
Inverter: comprises electronic recharging unit, with possibility of inhibiting emergency operation (see Instructions).
Luminous Flux Weight Pack Qty. Product
Type Lamp (lm) (kg) Box Pallet Code
Lumens measured 5 seconds after starting.
EES Class: I IP 54
230V 50Hz CEI 34.21 / EN 60598-1
2D CL 28 WH EES 2D 28W 4 pin 3500K 600 2,90 4/1 108 7004189
Complete with lamp.
90
Indoor and outdoor luminaire for 16W and 21W Biax™ 2D compact fluorescent lamps,
with high degree of protection from the entry of dust and liquids (IP 65). Built of poly-
carbonate of high resistance against shocks and atmospheric agents, it is particularly
indicated for all the applications where high robustness (anti vandalism) is required.
200
Body: self-extinguishing, impact-resistant polycarbonate.
Frame: self-extinguishing, impact-resistant polycarbonate.
Reflector: self-extinguishing, impact-resistant polycarbonate with a high reflection
index.
Diffuser: self-extinguishing, impact- and UV-resistant polycarbonate, with external
longitudinal prismatic reeding.
Power supply: 230V 50Hz, without power factor correction.
Q-BULK emergency
Autonomous luminaire for emergency lighting for permanent operation, with built-in recharge unit, sealed batteries and low-loss ballast.
The fitting is powered by mains and operated by a remote switch just like a regular light. In the event of blackout, the luminaire automatically switches to battery power. Regular
mains power supply is indicated by a red LED, which also indicates that batteries are re-charging.
Batteries: sealed, Ni-Cd 3.6V with 4Ah capacity. Emergency operation guaranteed for 1 hour following minimum recharge period of 24 hours at operating temperature of 25°C.
Inverter: comprises electronic recharging unit, with possibility of inhibiting emergency operation (see Instructions).
Simple and elegant luminaire family for Biax™ 2D compact fluorescent lamps, designed for
indoor applications requiring comfortable, high-efficiency lighting with low power
consumption. Besides the standard model, special versions are available with permanent
100 110 operation emergency supply unit.
23 27 Body: self-extinguishing, impact-resistant polycarbonate.
78 94
Reflector: self-extinguishing, impact-resistant polycarbonate with a high reflection index.
260 325 Diffuser: transparent or opal, impact-resistant polycarbonate with prismatic internal
surface.
16W - 21W 28W - 38W Power supply: 230V 50Hz without power factor correction. Low-loss ballast for 38W.
g GE Lighting 66
DIAMOND
Weight Pack Qty. Product Weight Pack Qty. Product
Type Lamp (kg) Box Pallet Code Type Lamp (kg) Box Pallet Code
16W with transparent diffuser Class: 0000 IP 40 16W with opal diffuser Class: 0000 IP 40
230V 50Hz CEI 34.21 / EN 60598-1 230V 50Hz CEI 34.21 / EN 60598-1
2D DM 16 WH 2D 16W 4 pin 3500K 1,00 6/1 144 7004302 2D DMO 16 WH 2D 16W 4 pin 3500K 1,00 6/1 144 31801
2D DM 16 RD 2D 16W 4 pin 3500K 1,00 6/1 144 7004303 2D DMO 16 RD 2D 16W 4 pin 3500K 1,00 6/1 144 32040
2D DM 16 BK 2D 16W 4 pin 3500K 1,00 6/1 144 7004305 2D DMO 16 BK 2D 16W 4 pin 3500K 1,00 6/1 144 32042
Complete with lamp. Complete with lamp.
21W with transparent diffuser Class: 0000 IP 40 21W with opal diffuser Class: 0000 IP 40
230V 50Hz CEI 34.21 / EN 60598-1 230V 50Hz CEI 34.21 / EN 60598-1
2D DM 21 WH 2D 21W 4 pin 3500K 1,00 6/1 144 7004220 2D DMO 21 WH 2D 21W 4 pin 3500K 1,00 6/1 144 33819
2D DM 21 RD 2D 21W 4 pin 3500K 1,00 6/1 144 7004221 2D DMO 21 RD 2D 21W 4 pin 3500K 1,00 6/1 144 38438
2D DM 21 BK 2D 21W 4 pin 3500K 1,00 6/1 144 7004223 2D DMO 21 BK 2D 21W 4 pin 3500K 1,00 6/1 144 38439
Complete with lamp. Complete with lamp.
28W with transparent diffuser Class: 0000 IP 40 28W with opal diffuser Class: 0000 IP 40
230V 50Hz CEI 34.21 / EN 60598-1 230V 50Hz CEI 34.21 / EN 60598-1
2D DM 28 WH 2D 28W 4 pin 3500K 1,70 4/1 108 7004193 2D DMO 28 WH 2D 28W 4 pin 3500K 1,70 4/1 108 30334
2D DM 28 RD 2D 28W 4 pin 3500K 1,70 4/1 108 7004196 2D DMO 28 RD 2D 28W 4 pin 3500K 1,70 4/1 108 32050
2D DM 28 BK 2D 28W 4 pin 3500K 1,70 4/1 108 7004198 2D DMO 28 BK 2D 28W 4 pin 3500K 1,70 4/1 108 303370
Complete with lamp. Complete with lamp.
38W with transparent diffuser Class: 0000 IP 40 38W with opal diffuser Class: 0000 IP 40
230V 50Hz CEI 34.21 / EN 60598-1 230V 50Hz CEI 34.21 / EN 60598-1
2D DM 38 WH 2D 38W 4 pin 3500K 1,80 4/1 108 7004186 2D DMO 38 WH 2D 38W 4 pin 3500K 1,80 4/1 108 30323
2D DM 38 RD 2D 38W 4 pin 3500K 1,80 4/1 108 7004144 2D DMO 38 RD 2D 38W 4 pin 3500K 1,80 4/1 108 38440
2D DM 38 BK 2D 38W 4 pin 3500K 1,80 4/1 108 7004187 2D DMO 38 BK 2D 38W 4 pin 3500K 1,80 4/1 108 30324
Complete with lamp. Complete with lamp.
DIAMOND emergency
Emergency lighting luminaire for permanent operation, with built-in recharge unit and
sealed batteries.
The fitting is powered by mains and operated by starter just like a regular light. In the
event of blackout, the luminaire automatically switches to battery power. Regular mains
power supply is indicated by a red LED, which also indicates that batteries are re-charging.
Batteries: sealed, Ni-Cd 3.6V with 2Ah capacity (for 16W version); 4Ah capacity (for 28W
version). Emergency operation guaranteed for 1 hour following minimum recharge period of
24 hours at operating temperature of 25°C.
Inverter: comprises electronic recharging unit, with possibility of inhibiting emergency
operation by connection of terminals 11 and 12 to a remote switch. These two terminals
can be disconnected without battery discharge.
g GE Lighting
WH = white RD = red BK = black
67
QUAD
These indoor luminaires of simple and smart design using Biax™ 2D 10W compact
120 fluorescent lamps are suitable for household and commercial applications. Its particular
line allows to couple several luminaires to be able to create multiple compositions,
providing infinite application solutions. Available in white and black colours.
120
172
Body: self-extinguishing, impact-resistant polycarbonate.
Diffuser: self-extinguishing, impact-resistant polycarbonate with internally grooved opal
finish.
Power supply: 230V 50Hz, without power factor correction.
172 60
g GE Lighting 68
WH = white BK = black
POCKET 16
Ultra slim-line (65 mm) interior luminaire for 16W Biax™ 2D lamp. Ideal for constantly
illuminated areas, such as corridors, stairways, entrances, etc.
Available in two versions:
• standard
230 • with switch and power supply cable.
Body: coloured self-extinguishing impact-resistant polycarbonate.
Reflector: white self-extinguishing polycarbonate with a high reflection index.
170 63 Diffuser: methacrylate with internal longitudinal prismatic reeding for high optical
comfort.
Power supply: 230V 50Hz without power factor correction.
WH = white RD = black
g GE Lighting 69
CITY
Outdoor luminaire (IP 65) for 28W Biax™ 2D lamp. 2D CITY is manufactured of high impact-
resistant polycarbonate and ideal for lighting residential areas, due to its long life and low
power consumption.
Base: self-extinguishing polycarbonate. Available in black or white.
310 Reflector: highly reflective self-extinguishing polycarbonate.
Diffuser: high UV resistance transparent self-extinguishing polycarbonate.
Post adapter: self-extinguishing polycarbonate for ÿ 60 mm posts. Tamper-proof mounting
with no exposed screws.
250 115
Power supply: 230V 50Hz, without power factor correction.
Accessories
Adapter
2D CYA WH 0,30 4/1 32513
2D CYA BK 0,30 4/1 32512
Post
2D CYP 1.2 BK 1200 1,10 6/1 32521
2D CYP 1.8 BK 1800 1,70 6/1 32525
g GE Lighting 70
WH = white BK = black
TRIS
Luminaire for interior and exterior use for 16W and 21W Biax™ 2D lamps, manufactured in
high impact- resistant polycarbonate. Ideal for lighting residential areas where long-term
172 172
196 196 reliability and extremely low costs are essential.
Available in two versions:
• standard
196 196 • with front louvre.
205 205
Body: impact-resistant, self-extinguishing polycarbonate.
42 42 Frame and louvre: impact-resistant, self-extinguishing polycarbonate.
Standard version Version with front louvre Reflector: highly reflective self-extinguishing polycarbonate.
Diffuser: UV-resistant transparent polycarbonate with internal longitudinal prismatic
reeding.
Post adapter: in self-extinguishing polycarbonate for Ø 60 mm posts. Tamper-proof
mounting with no exposed screws.
Power supply: 230V 50Hz, without power factor correction.
Accessories
Single adapter
245 429 2D TR1 WH 0,13 6/1 31643
2D TR1 BK 0,13 6/1 31644
205
Double adapter
2D TR2 WH 0,18 6/1 31645
2D TR2 BK 0,18 6/1 31650
TR1 TR2
Post
2D CYP 1.2 BK 1200 1,10 6/1 32521
2D CYP 1.8 BK 1800 1,70 6/1 32525
WH = white BK = black
g GE Lighting 71
ELITE
These luminaires for interior and exterior use feature a high degree of protection against
the penetration of dust and liquids (IP 54); made entirely of polycarbonate, highly resistant
to shocks and chemical agents.
420 190 Ideal for domestic, commercial and residential areas, or wherever high efficiency standards
75 must be combined with low energy costs.
All fittings are supplied with compact fluorescent lamps Biax™ L 3,500K, with high
luminous flux density.
Available in white, grey and red.
Body: self-extinguishing polycarbonate.
Internal reflector: white self-extinguishing polycarbonate with high reflection index.
Diffuser: opal-finish self-extinguishing polycarbonate with internal prismatic reeding.
Frame: self-extinguishing polycarbonate.
Power supply: 230V 50Hz, without power factor correction.
Emergency lighting luminaire for permanent operation (EES – with low-loss ballast) or for non-permanent operation (ENS), with built-in recharge unit and sealed batteries.
The permanent operation fitting is powered from the mains and operated by remote switch just like a regular lamp. In the event of power failure, the luminaire automatically
switches to battery power. In case of non-permanent operation, the luminaire will switch on only in the event of power failure. Regular mains power supply is indicated by a
red LED, which also indicates that batteries are re-charging.
Batteries: sealed, Ni-Cd 3.6V with 4Ah capacity. Emergency operation guaranteed for 1 hour following minimum recharge period of 24 hours at operating temperature of 25°C.
Inverter: comprises electronic recharging unit, with possibility of inhibiting emergency operation (see Instructions).
g GE Lighting 72
WH = white GY = grey BK = black
POCKET 11
85 70
Indoor luminaire for Biax™ S 11W compact fluorescent lamp with G23 cap. It is made of
self-extinguishing, impact-resistant polycarbonate and ideal for constantly illuminated
areas, such as corridors, entrances and stairways.
Body: coloured self-extinguishing impact-resistant polycarbonate.
320 Reflector: self-extinguishing impact-resistant polycarbonate with a high reflection
index.
Diffuser: self-extinguishing impact- and UV-resistant polycarbonate with internal
longitudinal prismatic reeding for high optical comfort.
Power supply: 230V 50Hz without power factor correction.
Round recessed luminaires, complete with energy saving 10W or 21W Biax™ 2D compact
TOP/2DR 10 TOP/2DR 21 fluorescent lamps with 4-pin GR 10 cap, with external starter. Luminaires are completely
wired (without power factor correction) and are installed on normally inflammable surfaces.
Ultra slim height.
86 86
Body: white polycarbonate, complete with ballast, nylon terminal block, starter holder and
cable clamp, features upper power supply polycarbonate cover fitted to the body; slots
Ø 135 Ø 195
facilitate heat dispersal.
Ø 160 Ø 220 Lamp compartment: white polycarbonate with high-reflective polished finish; contains the
lampholder and starter holder, easily accessible during maintenance. It is provided with a
diffuser of opal polycarbonate with internal prismatic finish; snaps on the body, thereby
fixing the coloured-edge ring on lower part of luminaire.
Mounting springs: stainless steel.
Coloured ring (optional): available in white, black, golden and root colours; made of steel
sheet with powder paint finish; it is held in position by the clips, which fix the diffuser.
Lampholder: polycarbonate.
Accessories
Coloured ring
TOP/RING 10 WH 0,45 6 7003029
TOP/RING 10 BK 0,45 6 7003030
TOP/RING 10 GD 0,45 6 7003031
TOP/RING 10 RK 0,45 6 32353
TOP/RING 21 WK 0,60 6 7003032
TOP/RING 21 BK 0,60 6 7003033
TOP/RING 21 GD 0,60 6 7003034
TOP/RING 21 RK 0,60 6 32354
g GE Lighting 74
WH = white BK = black GD = gold RK = root
TOP/DBX
107
180x125x53h Ø 225
Ø 245
Weight Pack Qty. Product
TOP/DBX 2226 Type Lamp (kg) Box Pallet Code
g GE Lighting 75
TOP/DBX
SILK-SCREENED GLASS
Highly decorative, it enhances the visual comfort. It is fastened with self-extinguishing
white polycarbonate trigger to the body on one side and blocked with a spring on the
other; thickness 3 mm.
Accessories
TOP/GLASS
TOP/GLASS 213-126 Silk-screened glass for versions 2x13W and 1x26W 0,166 10 32281
TOP/GLASS 218-226 Silk-screened glass for versions 2x18W and 2x26W 0,240 10 32284
DARK-LIGHT LOUVRE
It eliminates glare and is particularly suitable for environments with video terminals.
Made from ABS metallized in vacuum. It is fastened with trigger onto a self-extinguish-
ing ring in white polycarbonate vaxed to the body on one side and fixed with spring onto
the other.
Accessories
TOP/LOUVER
TOP/LOUVER 213-126 Louvre dark-light for versions 2x13W and 1x26W 0,061 6 32288
TOP/LOUVER 218-226 Louvre dark-light for versions 2x18W and 2x26W 0,098 6 32289
Spare parts
TOP/RING
TOP/RING 213-126 Black anti-reflection ring for versions 2x13W and 1x26W 0,032 10 32291
TOP/RING 218-226 Black anti-reflection ring for versions 2x18W e 2x26W 0,035 10 32301
g GE Lighting 76
Series 5503 2D
Luminaire with optical louvre for 38W or 55W Biax™ 2D compact fluorescent lamp, for
mounting on all types of suspended ceiling, complete with micrometric adjustment
mounting clips and protection fuse.
Body: 6/10 mm press-bent sheet steel with white powder paint finish.
Optical attachments: /16 louvre with broad symmetrical batwing light distribution,
featuring longitudinal reflectors and double parabolic transverse blades, of anodised anti-
iridescent 99.90% pure aluminium with mirror finish. Direct longitudinal and transverse
luminance less than 200 cd/m2 for vertical angles over 60°. Ideal for work environments
with video display terminals.
Control gear and electric circuit: 230V 50Hz; explosion-proof power factor correction
capacitor with built-in discharge resistance; terminal block with 2.5mm2 clamping screws
complete with built-in 2A fuse.
The 55W type is equipped with electronic ballast.
310 310
5503 2D Class: I IP 40
230V 50Hz CEI 34.21 / EN 60598-1
5503/138/16 H 1 x 2D 38 4 pin 3500K 2,20 1 108 32374
5503/155/16 EB* 1 x 2D 55 4 pin 3500K 2,40 1 108 37274
* Electronic ballast - Complete with lamp.
g GE Lighting 77
GREENPHOS
Elegant luminaires for simple and quick mounting on walls or ceilings. High protection against entering of dust and liquid. They are ideal choice for outdoor and indoor illuminating
in industrial, commercial and domestic applications. Complete with electronic Biax™ T energy saving compact fluorescent lamp with E27 cap (20W for BLOW and WALL and 15W
for PEAK version). They “F”-marked and can be installed on any inflammable surface. Body: UV-stabilized, impact-resistant, self-extinguishing V1 polycarbonate with a softening
point of 150 °C. Mounting on the surfaces with 2 screws. Reflector. anodised aluminium with high reflexion index. Diffuser: UV-stabilized, impact-resistant, self-extinguishing V1
polycarbonate with a softening point of 150 °C, with anti-iridescent satin-finish for high visual comfort. The PEAK model is conic, the BLOW is provided with decorative grids and
the WALL version is flat shaped. They can be fixed by 4 stainless steel screws to the body (models BLOW and WALL) or click-fit in case of PEAK.
Lampholder: high heat-resistant (230 °C) polyester. Colours: black and white RAL 9010.
g GE Lighting 78
WH = white BK = Black
GENUSPOT
Advantages of
Genura™ lamp:
90
WH = white
g GE Lighting 79
TOP/FC - TOP/AC
Round recessed luminaires, either fixed (TOP/FC) or adjustable (TOP/AC) types, complete Weight Pack Qty. Product
with 230V 40W, 60W or 100W reflector lamp. Body: powder painted sheet steel.
Type Lamp (kg) Box Code
Lampholder: porcelain. Fastening straps: zinc-plated steel. Retainer ring: heat-
treated steel. Cable retainer: glass fibre reinforced nylon.
TOP/FC Class: IP 20
TOP/FC 40 Fixed 230V 50Hz IEC 598
115 TOP/FC 40 WH R 50 40W 0,19 24 37318
TOP/FC 40 BK R 50 40W 0,19 24 37319
Ø 60 TOP/FC 40 GD R 50 40W 0,19 24 37320
Ø 80
TOP/FC 60 WH R 63 60W 0,27 24 37321
TOP/FC 60 TOP/FC 100 TOP/FC 60 BK R 63 60W 0,27 24 37323
125 140 TOP/FC 60 GD R 63 60W 0,27 24 37324
TOP/FC 100 WH R 80 100W 0,34 24 37325
TOP/FC 100 BK R 80 100W 0,34 24 37326
Ø 80 Ø 90
Ø 100 Ø 125 TOP/FC 100 GD R 80 100W 0,34 24 37327
Complete with lamp.
TOP/AC Class: IP 20
TOP/AC 40 TOP/AC 60
110 135 Adjustable 230V 50Hz IEC 598
TOP/M
Round recessed fitting, complete with low-voltage miniature 12V 20W G4 halogen lamp. Installed on normally inflammable surfaces. 230/12V safety transformer should be installed
separately. Wired with heat-resistant cables with silicon sleeve. Body: die-cast aluminium with polyester powder paint finish. Reflector: polished pressed aluminium.
Lampholder: ceramic. Mounting spring: harmonica steel. Terminal block: polyamide.
g GE Lighting 80
TOP/DFC - TOP/DAC
Round recessed luminaires either fixed (TOP/DFC) or adjustable (TOP/DAC) types, complete with dichroic mirror halogen lamp and medium beam front cover. Installed on normally
inflammable surfaces. 230/12V safety transformer should be installed separately. Body: die-cast aluminium with GU 5.3 cap. Polyester powder paint finish.
Lampholder: ceramic. Mounting spring: galvanised hardened steel. Terminal block: fibreglass-reinforced nylon. Lamp cable: fibreglass-reinforced polyamide.
Warning: when using low voltage halogen spotlights with electronic transformers, house the latter in containers offering sufficient ventilation that are spaced
apart at a suitable distance from one another and away from sources of heat.
TOP/DFC 50
120
Weight Pack Qty. Product
Type Lamp (kg) Box Code
Ø 66
Ø 82
TOP/DFC Class: 000 IP 20
Fixed 12V CEI 34.21/EN60598-1 IEC 598
41
Adjustable 12V CEI 34.21/EN60598-1 IEC 598
14
TOP/DAC 50 WH M250 50W GU 5.3 0,17 48 37344
Ø 80 TOP/DAC 50 BK M250 50W GU 5.3 0,17 48 37347
Ø 100
TOP/DAC 50 GD M250 50W GU 5.3 0,17 48 37348
Complete with lamp.
g GE Lighting 81
TOP/HA
Swivelling recessed indoor luminaires for Arstream® ARC70/T/U/.../G12 and ARC150/T/U/..../G12 metal halide lamps with G12 cap. Electric gearbox should be installed separately.
Fittings rotate 355° around vertical axis, 45° around horizontal axis.
Body: bonderised die-cast aluminium with epoxy polyester powder paint finish. Cable clamp and terminal block supplied.
Reflector: anodic oxidised and polished 99.9% pure aluminium.
Front cover glass: tempered, hinged with spring closure. UV protected in 150W version.
Mounting springs: galvanised hardened steel.
Lampholder: G12, ceramic.
Terminal block: three-phase, fibreglass-reinforced nylon.
Power supply box CSA/H 230V 50Hz: fibreglass-reinforced nylon, complete wired, with power factor correction. To be ordered temporarely.
Installation: into ceiling max 2,5 cm thick.
TOP/HA Class: I IP 20
230V 50Hz (with appropriate supply unit) CEI 34.21/EN60598-1 - CEI 34.31/EN 60598-2-2
g GE Lighting 82
TOP/MQF - TOP/MQA
Swivelling or fixed interior luminaires for Arcstream® ARC70/TD/.../Rx7s and ARC150/TD/.../Rx7s double-ended metal halide lamps with Rx7s cap. Electric gear should be ordered
and installed separately.
Body: in bonderised die-cast aluminium with epoxy polyester powder paint finish. In fixed version, cable clamp and terminal block are set on galvanised steel plate on top of fitting.
Swivelling version (TOP/MQA) may rotate 355° around vertical axis, 45° around horizontal axis.
Reflector: anodic oxidised polished 99.8% pure aluminium.
Front cover glass: tempered, hinged with spring closure. UV protected in 150W version.
Mounting springs: galvanised hardened steel.
Lampholder: ceramic, Rx7s type.
Terminal block: three-phase, fibreglass-reinforced nylon.
Power supply box CSA/H 230V 50Hz: fibreglass-reinforced nylon, wired complete with power factor correction.
Installation: into ceiling max 2,5 cm thick.
145
TOP/MQF Class: I IP 40
94 230V 50Hz (with appropriate supply unit) CEI 34.21/EN60598-1 - CEI 34.31/EN 60598-2-2
TOP/MQA Class: I IP 20
230V 50Hz (with appropriate supply unit) CEI 34.21/EN60598-1 - CEI 34.31/EN 60598-2-2
g GE Lighting 83
GESPOT 5
Elegant indoor luminaires for GE 40W R50 reflector bulb incandescent lamp (enclosed). Body: sheet steel with stoved epoxy-polyester powder paint finish.
Installation: with terminal block built in the base plate (B version) or with 1m cable, clip, switch and plug (C version).
Base plate and clip: plastic in same colour as body; double-wired. Lampholder: heat-resistant phenol resin. Colours: RAL 9010 white or mat black.
GESPOT 5 Class:00000 IP 20
115
115 230V 50Hz CEI 34.21 / EN 60598-1
60
60 GESPOT 5 B WH 40R50/E14 0,177 10/1 300 7002995
130 140 GESPOT 5 B BK 40R50/E14 0,177 10/1 300 7002996
GESPOT 5 C WH 40R50/E14 0,271 10/1 300 7002997
85 110
GESPOT 5 C BK 40R50/E14 0,271 10/1 300 7002998
Complete with lamp.
GESPOT 6
Elegant indoor luminaires for GE 60W R63 reflector bulb incandescent lamp (enclosed). Body: sheet steel with stoved epoxy-polyester powder paint finish.
Installation: with terminal block built in the base plate (B version) or with 1m cable, clip, switch and plug (C version).
Base plate and clip: plastic in same colour as body; double-wired. Lampholder: heat-resistant phenol resin. Colours: RAL 9010 white or mat black.
135
135 GESPOT 6 Class:00000 IP 20
230V 50Hz CEI 34.21 / EN 60598-1
75
75
GESPOT 6 B WH 60R63/E27 0,251 10/1 300 7002999
155 175
GESPOT 6 B BK 60R63/E27 0,251 10/1 300 7003000
GESPOT 6 C WH 60R63/E27 0,363 10/1 160 7003001
85 110 GESPOT 6 C BK 60R63/E27 0,363 10/1 160 7003002
Complete with lamp.
GESPOT 8
Elegant indoor luminaires for GE 100W R80 reflector bulb incandescent lamp (enclosed). Body: sheet steel with stoved epoxy-polyester powder paint finish.
Installation: with terminal block built in the base plate (B version) or with 1m cable, clip, switch and plug (C version).
Base plate and clip: plastic in same colour as body; double-wired. Lampholder: heat-resistant phenol resin. Colours: RAL 9010 white or mat black.
140
140 GESPOT 8 Class:00000 IP 20
230V 50Hz CEI 34.21 / EN 60598-1
95
95
GESPOT 8 B WH 100R80/E27 0,311 10/1 160 7003003
178 183
GESPOT 8 B BK 100R80/E27 0,311 10/1 160 7003004
GESPOT 8 C WH 100R80/E27 0,415 10/1 160 7003005
85 110 GESPOT 8 C BK 100R80/E27 0,415 10/1 160 7003006
Complete with lamp.
GARDENSPOT
Outdoor luminaires for PAR 38-ES (Economy) 120W E27 incandescent lamp (included), complete with base plate stake to make the installation easy, flexible and variable. Neoprene
supply power cable of 2m length with plug. The luminaires can be installed on any inflammable surface.
Body and base plate: black plastic.
Stakes: robust black plastic. Lampholder: ceramic E27. Gasket: silicone rubber.
180
312
120 GARDENSPOT Class:00000 IP 44
125 230V 50Hz CEI 34.21 / EN 60598-1
GARDENSPOT 120PAR/SP/ES 0,79 10/1 150 32155
Complete with lamp.
WH = white BK =black
g GE Lighting 84
GE Edison
Designer look and correct engineering are the main features of Edison series. Easy and quick installation either on wall, on ceiling or on any inflammable surface. High IP54
insulation for total protection against the penetration of foreign objects and water. For both indoor and outdoor installation in industrial plants, commercial establishments and at
home. Supplied with GE Longlife 230V 60W vibration resistant incandescent lamp. Body: inflammable, shock-resistant UV stabilised polycarbonate. Reflector: high reflection
factor surface-treated steel (aluminium in case of ELIS type). Refractor: inflammable, shock-resistant polycarbonate, light distribution ensuring high visual comfort, sanitised finish
(available in red for ELIS type). Four clamps for fixing to body. Lampholder: heat-resistant polyester (230 °C). Colours: white or black.
Supplied with
GE Longlife
incandescent lamp
of double life time
GLOB Class:00000 IP 54
230V 50Hz CEI 34.21 / EN 60598-1
GB 60 WH/FAM24 GE Longlife 60W 0,4 24/1 96 37370
104mm
GB 60 BK/FAM24 GE Longlife 60W 0,4 24/1 96 37373
Complete with lamp.
ROLL Class:00000 IP 54
216mm
230V 50Hz CEI 34.21 / EN 60598-1
RL 60 WH/FAM36 GE Longlife 60W 0,4 36/1 144 37376
RL 60 BK/FAM36 GE Longlife 60W 0,4 36/1 144 37377
70mm
Complete with lamp.
ELIS Class:00000 IP 54
230V 50Hz CEI 34.21 / EN 60598-1
229mm
ES 60 WH/FAM36 GE Longlife 60W 0,3 36/1 144 37378
ES 60 BK/FAM36 GE Longlife 60W 0,3 36/1 144 37379
ES 60 BKRD/FAM36 GE Longlife 60W 0,3 36/1 144 37380
155mm
Complete with lamp.
WH = white BK = black
BKRD = black body, red refractor
g GE Lighting 85
EUROBAY
Eurobay luminaires for interior application feature a low-profile design and can be
equipped with high pressure mercury vapour, sodium or metal halide lamps of up to
400 W. Version “CD” is also available, where an additional halogen lamp will light up
and operate as long as the main discharge lamp can reach its rated power at switch on.
Ideal for industrial and commercial environments, with medium-high installation heights.
Main body: die-cast aluminium body with slide-adjustable steel suspension hook for
balancing the fitting.
Wiring box: connected to the main body and made from fibreglass-reinforced
engineering polymer thermoplastic. The wiring box contains the lamp operating
components, which are mounted on a removable galvanised steel plate. Accessed by way
of a hinged door fitted with a neoprene gasket and secured by four stainless steel screws.
Cable inlet: The wiring box is fitted with a nylon PG13.5 cable gland for cable diameters
of 9 to 12.5 mm.
Reflector: 99.85% anodised, mirror-finish aluminium reflector ideal for clear bulbs.
The reflector is fitted with a silicone gasket and secured to the main body by four screws.
Designed to fit a wire guard and protective glass.
Lampholder: plastic E40 version. The lampholder can be adjusted in 4 different positions
to optimise light distribution in relation to the type of lamp used and the installation
height.
ACCESSORIES
Protective glass EBV: tempered glass fixed to the reflector by three stainless steel clips;
supplied with safety chain attached to the main body.
Wire guard EBG: galvanised steel wire guard used in conjunction with the protective
90°
90° 90°
90° glass, and supplied complete with safety chain.
EB400H+EBR+EBV
EB400H+EBR+EBV 180°180°
EB400H+EBR+EBV
EB400H+EBR+EBV 180°180°
Pos.1.1
Pos. 180.0°
C C
Semipiani 0° Pos.4.4
Pos. C C
Semipiani 0° Diffuser EBD: UV-stabilized, self-extinguishing V0 polycarbonate, fixed by 6 clips to the
180.0° 0.0°
0.0° 0° 180.0°
180.0° 0.0°
0.0° 0°
270°
270° 270°
270°
body.
Gamma°
Angoli Gamma 180
180 150 135
150 135 120
120 Gamma°
Angoli Gamma 180
180 150 135
150 135 120
120
105
105 105 105
105 105
105
105
100 50
75
100 75 75
50 75
75 200
200 75 75 100
100 75
300
300 60 150
150 60
60 60
60 60 60 60
400 200
400 200
cd/klm cd/klm
30
30 15
15 00 15
15 30
30
cd/klm 30
30 15
15 00 15
15 30
30
cd/klm
LOR 73,7%
Rend. Tot. 73,7% LOR 73,7%
Rend. Tot. 76,1%
90°
90° 90°
90° 90°90° 90°
90°
EB400M+EBR+EBV
EB400M+EBR+EBV 180°180° EB400M+EBR+EBV
EB400M+EBR+EBV 180°180°
EB400SH+EBRD+EBD
EB400SH+EBR+EBV 180°
180°
EB400M+EBRD+EBD
EB400SM+EBR+EBV 180° 180°
Pos.1.1
Pos. C C
Semipiani 0° Pos.4.4
Pos. CC
Semipiani 0° Pos.3.3
Pos. SemipianiC C 0° Pos.
Pos. 3. 3 C C
Semipiani 0°
180.0°
180.0° 0.0°
0.0°
0° 180.0°
180.0° 0.0°
0.0° 0° 180.0° 0.0°
180.0° 0.0° 0° 180.0°
180.0° 0.0°
0.0° 0°
270° 270° 270° 270°
270° 270° 270° 270°
Gamma°
Angoli Gamma 180
180 150 135
150 135 120
120 Gamma°
Angoli Gamma 180
180 150 135
150 135 120
120 Gamma°
Angoli Gamma 180 150
180 135
150135 120
120 Gamma°
Angoli Gamma 180
180 150 135
150 135 120
120
105
105 105 105
105 105
105 105
105 105105 105
105 105
105
105
9090 90
90 9090 9090 90
90 90 90 90 90 90
90
125 75 40 30
75
125 75 50 75 75
50 75 50 75
75 75
75 250
250 75 75 100
150 75 75 80100 75 75 100
60 75
375
375 60
150 120
150 60
150
60 60 225 60 60 60 90 60
60 60 60 60 60 60 60 60
500 300 160 120
500 200 200 200
cd/klm cd/klm cd/klm cd/klm
3030 15
15 00 15
15 30
30
cd/klm 30
30 15
15 00 15
15 30
30 cd/klm 30
30 15
15 00 1515 3030
cd/klm 3030 1515 00 15
15 30
30 cd/klm
LOR 82,5%
Rend. Tot. 82,5% LOR 82,5% LOR 76,8%
Rend. Tot. 76,8% LOR 73,5%
Rend. Tot. 73,5%
Rend. Tot. 82,1%
g GE Lighting 86
EUROBAY
Weight Pack Qty. Product
Type Lamp (kg) Box Pallet Code
Body complete with principal lamp and an auxiliary 150W halogen lamp.
EUROBAY Class: 0000 With protective front glass IP 65
230V 50Hz For open luminaires or
CEI 34.21 / EN 60598-1, IEC 598 luminaires with wire guard IP 23
EB 250 H CD H250/40 5,4 1 30 90335
EB 400 H CD H400/40 6,5 1 30 90334
EB 250 M CD ARC250/T/VBU/960/40 5,6 1 30 90333
EB 400 M CD KRC400/T/VBU/960/40 6,8 1 30 90332
EB 150 S CD LU150/100/40 4,4 1 30 90331
EB 250 S CD LU250/T/40 5,6 1 30 90330
EB 400 S CD LU400/T/40 7,2 1 30 90329
468,5
EBRD
Weight Pack Qty. Product
Type Description (kg) Box Pallet Code
310
310 311311
Reflector
EUROBAY
EBR Reflector 1,20 4 32 33686
435
435 468,5
468,5 EBRD Reflector 0,85 4 16 92305
EBR
EBRD
365
365
435
435
EBV EBD
EBD
Accessories
EUROBAY
435
435 EBV Protective glass for EBR 2,00 4 112 33687
EBG EBG Wire guard for EBR 0,40 4 112 33688
EBG EBG Diffusor for EBRD 1,15 4 40 92304
g GE Lighting 87
COMPAK
Indoor ceiling luminaires for clear bulb high pressure sodium and metal halide lamps of
up to 400W.
Body: cold-pressed bonderised sheet steel with white stoved polyester powder paint
finish.
The two side clamps for mounting on the ceiling are fixed on top. Power supply unit with
power factor correction, terminal block and cable clamp are mounted on a removable
galvanised sheet steel located in a compartment. Cover on power supply compartment
fixed by two screws with knurled nuts.
One side hinged, easily removable white sheet steel frame with expanding rubber gasket
holds the tempered front glass (enclosed as a standard accessory) protecting the optics.
The other side of the frame is fixed to the body by two M5x60 stainless steel screws for
protection against fall.
Reflector: anodised and polished 99.85% pure hammered aluminium.
Lampholder: porcelain E40.
Cable entry: through grommet on the top of the luminaire.
90°
CPC 400 180°
C 0°
180.0° 0.0°
90.0° 270.0°
270°
75
75
75
COMPAK Class: I IP 42
30 200
150 600 230V 50Hz CEI 34.21 / EN 60598-1
60 225 60
CPC 250 LU250/T/40 275 13,3 1 30939
300
ARC250/T/H/960/E40
cd/klm
30 15 0 15 30
CPC 400 KRC400/T/H/960/E40 440 13,5 1 30941
LOR 57,3%
CPS 400 LU400/T/40 436 14,9 1 30943
HPF = with power factor correction - Without lamp.
90°
CPC 400 + CPG 180°
180.0°
C
0.0°
0° Pack Product
90.0° 270.0°
270°
Type Description Qty. Code
γ° 180 150 135 120
105 105
Accessories
90 90
50
75 75 CPG Ø 3mm electric welded galvanised steel wire guard. 5 31340
100
Dimensions: 39mm x 36mm.
60 150 60 Fixed through 4 threaded bores in front frame by 4
screws (enclosed).
200
cd/klm
30 15 0 15 30
LOR 48,0%
CPL Aluminium louvre with white paint finish. 1 31341
Dimensions of the grid: 50mm x 50mm.
Fitted in the frame, it is mounted by 4 screws fixing
the protective glass.
90°
CPC 400 + CPL 180°
C 0°
180.0° 0.0°
90.0° 270.0°
270°
60 150 60
CPV 4mm thick tempered glass sheet (enclosed) fixed by 5 31342
2 screws to the front frame.
200
cd/klm
30 15 0 15 30
g GE Lighting 88
VERSABEAM
Indoor luminaires in new “bowl shaped” form for 250W and 400W clear bulb high-
pressure sodium and metal halide lamps. Especially useful for installation of 5-11 m
height, in complicated assembly and machinery layouts and on sites with obstructions.
Body: die-cast aluminium ballast housing with electrocoat grey paint finish. It contains
230V 50Hz power supply unit with power factor correction, prepared for quick electronic
and mechanic connection to the reflector containing also the lampholder.
Threaded hub on top allows quick and safe installation with matching hook (not
included). Safety chain provisions available.
Optical assembly: basically a die-cast UV stabilised metacrylate refractor with
prismatic finish for optimum light output. Hinged to a circular high purity aluminium
reflector with ALGLAS coating (see page 144) and fastened to it through gasket by 4
stainless steel latches preventing fall. The lampholder fastened to the reflector,
surrounded by a small prismatic parabolic refractor for the maximum optical
performances. On the outside, the reflector is provided with positioning element for the
quick connecting to the body. Built-in carbon filter guarantees the optics to remain clean
for a long time.
Safety chain against fall is also available.
Lampholder: E40 porcelain.
Power supply: 230V 50Hz, with power factor correction, cos ϕ ≥ 0,9.
Maximum ambient temperature: 55°C.
Installation height: 5 -11 m.
Installation: with die-cast aluminium hook and safety fixing bolts.
IP 52 gearbox Class: I
230V 50Hz IEC - CEI
FGS25S LU250/T/40 275 8,80 1 30771
FGS40S LU400/T/40 436 9,90 1 30776
FGS25MBF MVR250/U/40 275 8,80 1 30788
787 FGS40MBF MVR400/U/40 430 8,80 1 30825
HPF = with power factor correction - Without lamp.
IP 54 gearbox Class: I
230V 50Hz IEC - CEI
FGS25SW LU250/T/40 275 8,80 1 30772
FGS40SW LU400/T/40 436 9,90 1 30785
610 FGS25MBFW MVR250/U/40 275 8,80 1 30800
FGS40MBFW MVR400/U/40 430 8,80 1 30832
HPF = with power factor correction - Without lamp.
IP 54 reflector - diffuser
VBDGEA LU250/400/T/40 610 6,30 1 31337
VBDVEA MVR250/U/40 610 6,30 1 31338
VBDAEA MVR400/U/40 610 6,30 1 31339
Warning: VERSABEAM is not suitable for high-pressure mercury vapour lamps.
13
SFC3-B SFC-O
Accessories
Safety chain
SFC3-B For the body, of. 0,9 m length 0,25 1 31273
SFC-O For the reflector 0,10 1 31277
g GE Lighting 89
FILTERGLOW
Indoor luminaires for max. 1000W clear bulb high-pressure sodium and metal halide
lamps.
Gearbox: die-cast aluminium ballast housing with electrocoat grey paint finish.
It contains 230V 50Hz power supply unit with power factor correction, prepared for quick
electronic and mechanic connection to the reflector containing also the lampholder.
Threaded hub on the top allows quick and safe installation with matching hook (not
included).
Safety chain provisions.
Reflector: pure aluminium, internally “ALGLAS” covered, clip-fit fastened to the gearbox;
tempered cover glass with rubber gasket, suspension hinge and three safety stainless
steel latches for fixing to the reflector. It can be equipped with safety chain.
The E7 version of 448 mm diameter is suitable for discharge lamps of max. 400W; the E2
version of 587 mm diameter is suitable for discharge lamp of 1000W and can be attached
either to the FGL or FGS type gearboxes. Carbon filter in the upper part preserves the
optics from gaseous or vaporous contamination.
Lampholder: E40 from porcelain, adjustable in 11 positions according to the type of lamp
used and the desired optical parameters.
Power supply: 230V 50Hz, with power factor correction, cos ϕ ≥ 0,9.
Maximum working ambient temperature: 55°C.
Wire guard: available on special request, can be attached to the protective glass and is
available in the WGNH-17E and WGNH-22E versions for the E7 and E2 reflectors,
respectively.
It is a concentric ring mesh in dia 3 mm zinc-plated steel wire.
Installation height: ≥ 6 m.
Installation: with die-cast aluminium hook and safety fixing bolts.
g GE Lighting 90
FILTERGLOW
IP 52 gearbox Class: I
230V 50Hz IEC - CEI
FGS25S LU250/T/40 275 8,80 1 30771
FGS40S LU400/T/40 436 9,90 1 30776
229 267 FGS25MBF MVR250/U/40 275 8,80 1 30788
FGS40MBF MVR400/U/40 430 8,80 1 30825
FGL01S LU1000/110/T/40 1050 18,20 1 30823
FGL01MBF MVR1000/U/40 1050 17,50 1 32254
HPF = with power factor correction - Without lamp.
762 756
IP 54 gearbox Class: I
230V 50Hz IEC - CEI
FGS25SW LU250/T/40 275 8,80 1 30772
FGS40SW LU400/T/40 436 9,90 1 30785
FGS25MBFW MVR250/U/40 275 8,80 1 30800
FGS40MBFW MVR400/U/40 430 8,80 1 30832
448 587
FGL01SW LU1000/110/T/40 1050 18,20 1 30816
FGS with E7 reflector FGL with E2 reflector FGL01MBFW MVR1000/U/40 1050 17,50 1 32253
HPF = with power factor correction - Without lamp.
Accessories
Safety chain
SFC3-B For the body, 0,9 m length 0,25 1 31273
SFC-O For the reflector 0,10 1 31277
g GE Lighting 91
LOWMOUNT 400
Indoor luminaires for 250W and 400W clear bulb high-pressure sodium and metal halide
lamps. Very versatile for low mounting in either commercial or industrial applications with
installation height of 3-8 m.
Gearbox: die-cast aluminium ballast housing with electrocoat grey paint finish. It contains
230V 50Hz power supply unit with power factor correction, prepared for quick electronic
and mechanic connection to the reflector containing also the lampholder.
Threaded hub on the top allows quick and safe installation with matching hook (not
included).
Safety chain provisions available.
Reflector: anodised polished “ALZAK” aluminium covered from the bottom by die-cast
UV-stabilised polycarbonate low luminance prismatic refractor.
Carbon filter in the body preserves the optics from the external contaminating agents.
The hinged reflector is fastened to the body through gasket by 2 strong stainless steel
latches protecting the lamp against fall.
Safety chain provisions available.
Lampholder: E40 porcelain.
Power supply: 230V 50Hz, with power factor correction, cos ϕ ≥ 0,9.
Maximum working ambient temperature: 55°C.
Installation height: 3 - 8 m.
Installation: with die-cast aluminium suspension hook and safety fixing bolts.
g GE Lighting 92
LOWMOUNT 400
IP 52 gearbox Class: I
381 230V 50Hz IEC - CEI
L4MD25S LU250/T/40 275 7,50 1 30878
L4MD40S LU400/T/40 436 8,60 1 30913
L4MD25MBF MVR250/U/40 275 7,50 1 30923
L4MD40MBF MVR400/U/40 430 7,60 1 30936
HPF = with power factor correction - Without lamp.
540
IP 54 gearbox Class: I
230V 50Hz IEC - CEI
L4MD25SW LU250/T/40 275 7,50 1 30879
L4MD40SW LU400/T/40 436 8,60 1 30892
773 L4MD25MBFW MVR250/U/40 275 7,50 1 30922
L4MD40MBFW MVR400/U/40 430 7,60 1 30930
HPF = with power factor correction - Without lamp.
IP 52 reflector – diffuser
L4MDLE MVR250/U/40 773 4,00 1 31335
L4MDLD other types 773 4,00 1 31333
IP 54 reflector – diffuser
L4MDLEW MVR250/U/40 773 4,00 1 31336
L4MDLDW other types 773 4,00 1 31334
13
Accessories
Safety chain
SFC3-B For the body, of 0,9 m length 0,25 1 31273
SFC-O For the reflector 0,10 1 31277
g GE Lighting 93
CONSERVA 250
Indoor luminaires for 70W, 100W and 250W clear bulb high-pressure sodium and 250W
metal halide lamps.
Intended for use in either commercial or industrial applications with installation heights of
2-6 m.
Gearbox: die-cast aluminium ballast housing with electrocoat grey paint finish, with 230V
50Hz power supply unit with power factor correction, lampholder and hinge for fastening
the reflector.
Hub on the top allows quick and safe electrical and mechanical connection of the die-cast
aluminium power supply unit box by using a slide. The suspending hook should be screwed
to the power supply unit box.
Safety chain provisions available.
Reflector: anodised polished “ALZAK” aluminium covered from the bottom by die-cast
UV-stabilised polycarbonate low luminance prismatic refractor fastened by insulating ring
to the reflector.
The hinged reflector is fastened to the body through gasket by 2 stainless steel latches
protecting the lamp against fall.
Lampholder: E40 porcelain.
Power supply: 230V 50Hz, with power factor correction, cos ϕ ≥ 0,9.
Maximum working ambient temperature: 55°C for 70 and 100W versions; 40°C for
other versions.
Installation heights: 2 - 6 m.
Installation: through the power supply unit box by using of die-cast aluminium suspending
hook.
318
417
IP 52 gearbox Clase: I
230V 50Hz IEC - CEI
MPB79S LU70/90/T12/27 81 2,00 1 30851
MPB11S LU100/100/T/40 112 2,30 1 30863
572
MPB25S LU250/T/40 275 3,20 1 30864
MPB25MBF MVR250/U/40 268 2,30 1 30865
HPF = with power factor correction - Without lamp.
IP 54 reflector – diffuser
C1SEL 572 2,80 1 31323
Suspension hook
13
SFC3-B
g GE Lighting 94
CONSERVA 400
Indoor luminaires for 250W and 400W clear bulb high-pressure sodium and metal halide
lamps. Intended for use in either commercial or industrial applications with installation
heights of 3-8 m.
Gearbox: die-cast aluminium ballast housing with electrocoat grey paint finish.
It contains 230V 50Hz power supply unit with power factor correction, prepared for quick
electronic and mechanic connection to the reflector containing also the lampholder.
Threaded hub on the top allows quick and safe installation with matching hook (not
included).
Safety chain provisions available.
Reflector: anodised polished “ALZAK” aluminium covered from the bottom by die-cast
UV-stabilised polycarbonate low luminance prismatic refractor containing the”base down”
lampholder.
Carbon filter in the body preserves the optics from the external contaminating agents.
The hinged reflector is fastened to the body through gasket by 2 strong stainless steel
latches protecting the lamp against fall.
Lampholder: E40 porcelain.
Power supply: 230V 50Hz, with power factor correction, cos ϕ ≥ 0,9.
Maximum working ambient temperature: 40°C.
Installation height: 3 - 8 m.
Installation: through the power supply unit box by using of die-cast aluminium
suspending hook.
318
IP 54 reflector - diffuser
C4SEL 773 3,70 1 31330
Suspension hook
13
SFC3-B
g GE Lighting 95
Photometric data
CPC 400 EB250M1
POLAR DIAGRAM NORMAL EFFICIENCY POLAR DIAGRAM NORMAL EFFICIENCY
OF OUTPUT ULOR 0.000 DLOR 0.573 LOR 0.573 OF OUTPUT ULOR 0.000 DLOR 0.785 LOR 0.785
(cd/1000 lm) CIE FLUX CODE (cd/1000 lm) CIE FLUX CODE
90° 90°
CIE FLUX CODE 57 91 98 100 57 CIE FLUX CODE 94 99 99 100 78
C 180° C 180°
180.0° 0.0° 180.0° 0.0°
0°
SPACING – HEIGHT RATIO 0° SPACING – HEIGHT RATIO
90.0° 270.0°
SHR NOM 0.75 SHR MAX 0.93
SHR NOM 2.00 SHR MAX 2.03 SHR MAX TR 2.27
270° 270°
UTILISATION FACTOR – UF (Floor) γ°
UTILISATION FACTOR – UF (Floor)
γ°
REFLECTION FACTOR ROOM INDEX REFLECTION FACTOR ROOM INDEX
120 135 150 180 120 135 150 180
Ceiling Walls Floor 0.75 1.00 1.50 2.00 3.00 4.00 5.00 Ceiling Walls Floor 1.00 1.50 2.00 3.00 4.00 5.00
105 105
0.70 0.50 0.10 0.379 0.472 0.511 0.536 0.561 0.574 0.582 0.70 0.50 0.10 0.679 0.731 0.759 0.787 0.801 0.809
0.30 0.346 0.447 0.490 0.518 0.547 0.562 0.572 0.30 0.651 0.708 0.739 0.772 0.789 0.799
0.10 0.322 0.428 0.473 0.503 0.535 0.552 0.563 0.10 0.629 0.690 0.723 0.759 0.778 0.790
90 90
0.50 0.50 0.10 0.372 0.465 0.503 0.527 0.550 0.562 0.570 0.50 0.50 0.10 0.671 0.722 0.747 0.773 0.786 0.794
0.30 0.343 0.443 0.485 0.512 0.538 0.553 0.562 200
0.30 0.646 0.701 0.731 0.761 0.777 0.786
75
0.10 0.321 0.427 0.470 0.498 0.528 0.544 0.555 0.10 0.627 0.685 0.716 0.750 0.768 0.779
75 75
0.30 0.50 0.10 0.367 0.459 0.495 0.518 0.541 0.552 0.559 0.30 0.50 0.10 0.663 0.711 0.736 0.761 0.773 0.780
150 400
0.30 0.340 0.440 0.479 0.505 0.531 0.544 0.553 0.30 0.641 0.694 0.722 0.751 0.765 0.774
0.10 0.319 0.424 0.466 0.494 0.522 0.537 0.546 0.10 0.624 0.680 0.709 0.741 0.758 0.767
225 60 600
60 0.70 0.50 0.20 0.389 0.487 0.533 0.563 0.593 0.609 0.620 0.70 0.50 0.20 0.702 0.763 0.796 0.833 0.851 0.863
0.30 0.352 0.458 0.506 0.539 0.574 0.594 0.607 0.30 0.666 0.732 0.769 0.810 0.833 0.848
300 0.10 0.325 0.435 0.485 0.520 0.558 0.580 0.595 800 0.10 0.639 0.708 0.747 0.792 0.818 0.834
0.50 0.50 0.20 0.381 0.477 0.519 0.546 0.573 0.588 0.597 0.50 0.50 0.20 0.688 0.745 0.774 0.805 0.822 0.831
cd/klm 0.30 0.347 0.451 0.497 0.527 0.558 0.575 0.586 cd/klm 0.30 0.658 0.718 0.752 0.788 0.807 0.819
30 15 0 30 15 0
0.10 0.323 0.432 0.478 0.510 0.544 0.564 0.576 0.10 0.634 0.697 0.733 0.773 0.795 0.809
(cd/1000 lm) CIE FLUX CODE (cd/1000 lm) CIE FLUX CODE
90° 90°
CIE FLUX CODE 56 90 97 100 48 CIE FLUX CODE 72 98 99 100 79
C 180° C 180°
180.0° 0.0° 180.0° 0.0°
0° SPACING – HEIGHT RATIO 0° SPACING – HEIGHT RATIO
90.0° 270.0°
SHR NOM 2.00 SHR MAX 2.02 SHR MAX TR 2.27 SHR NOM 0.50 SHR MAX 0.73
270° 270°
UTILISATION FACTOR – UF (Floor) γ°
UTILISATION FACTOR – UF (Floor)
γ°
REFLECTION FACTOR ROOM INDEX REFLECTION FACTOR ROOM INDEX
120 135 150 180 120 135 150 180
Ceiling Walls Floor 0.75 1.00 1.50 2.00 3.00 4.00 5.00 Ceiling Walls Floor 1.00 1.50 2.00 3.00 4.00 5.00
105 105
0.70 0.50 0.10 0.315 0.353 0.402 0.428 0.456 0.470 0.479 0.70 0.50 0.10 0.588 0.675 0.720 0.766 0.789 0.804
0.30 0.287 0.326 0.380 0.409 0.440 0.457 0.468 0.30 0.543 0.638 0.690 0.743 0.771 0.788
0.10 0.266 0.306 0.362 0.393 0.427 0.446 0.459 0.10 0.509 0.609 0.664 0.723 0.754 0.774
90 90
0.50 0.50 0.10 0.309 0.347 0.395 0.420 0.446 0.460 0.468 0.50 0.50 0.10 0.577 0.662 0.706 0.751 0.773 0.787
0.30 0.284 0.323 0.375 0.403 0.433 0.449 0.460 0.30 0.538 0.630 0.680 0.731 0.758 0.775
50 100
0.10 0.265 0.304 0.359 0.389 0.422 0.440 0.452 0.10 0.507 0.604 0.657 0.714 0.744 0.762
75 75
0.30 0.50 0.10 0.305 0.341 0.387 0.412 0.437 0.451 0.459 0.30 0.50 0.10 0.567 0.650 0.693 0.737 0.758 0.772
100 200
0.30 0.282 0.319 0.370 0.397 0.426 0.442 0.452 0.30 0.532 0.622 0.671 0.720 0.746 0.761
0.10 0.264 0.303 0.356 0.385 0.417 0.434 0.445 0.10 0.504 0.599 0.651 0.705 0.734 0.751
60 150 60 300 0.70 0.50 0.20 0.607 0.704 0.756 0.811 0.839 0.856
0.70 0.50 0.20 0.323 0.365 0.420 0.449 0.482 0.499 0.510
0.30 0.292 0.334 0.393 0.425 0.462 0.483 0.497 0.30 0.556 0.659 0.717 0.780 0.814 0.836
200 0.10 0.269 0.311 0.371 0.406 0.446 0.469 0.484 400 0.10 0.517 0.625 0.686 0.754 0.792 0.817
0.50 0.50 0.20 0.316 0.356 0.408 0.435 0.464 0.480 0.490 0.50 0.50 0.20 0.592 0.683 0.732 0.782 0.808 0.824
cd/klm 0.30 0.288 0.329 0.384 0.415 0.449 0.467 0.479 cd/klm 0.30 0.547 0.646 0.700 0.757 0.788 0.807
30 15 0 30 15 0
0.10 0.267 0.308 0.365 0.398 0.435 0.456 0.469 0.10 0.512 0.615 0.673 0.736 0.770 0.792
(cd/1000 lm) CIE FLUX CODE (cd/1000 lm) CIE FLUX CODE
90° 90°
CIE FLUX CODE 62 89 97 100 40 CIE FLUX CODE 79 98 99 100 82
C 180° C 180°
180.0° 0.0° 180.0° 0.0°
0° SPACING – HEIGHT RATIO 0° SPACING – HEIGHT RATIO
90.0° 270.0°
SHR NOM 1.50 SHR MAX 1.67 SHR MAX TR 1.86 SHR NOM 1.00 SHR MAX 1.25
270° 270°
UTILISATION FACTOR – UF (Floor) UTILISATION FACTOR – UF (Floor)
γ° γ°
REFLECTION FACTOR ROOM INDEX REFLECTION FACTOR ROOM INDEX
120 135 150 180 120 135 150 180
Ceiling Walls Floor 0.75 1.00 1.50 2.00 3.00 4.00 5.00 Ceiling Walls Floor 1.00 1.50 2.00 3.00 4.00 5.00
105 105
0.70 0.50 0.10 0.283 0.310 0.346 0.365 0.386 0.397 0.404 0.70 0.50 0.10 0.664 0.735 0.772 0.810 0.829 0.841
0.30 0.262 0.290 0.329 0.350 0.374 0.387 0.396 0.30 0.627 0.705 0.747 0.791 0.814 0.828
0.10 0.247 0.274 0.315 0.338 0.364 0.379 0.388 0.10 0.599 0.681 0.726 0.774 0.800 0.816
90 90
0.50 0.50 0.10 0.279 0.305 0.340 0.358 0.378 0.388 0.395 0.50 0.50 0.10 0.654 0.724 0.759 0.795 0.813 0.824
0.30 0.260 0.287 0.325 0.346 0.368 0.381 0.389 0.30 0.622 0.697 0.738 0.779 0.800 0.814
50 125
0.10 0.246 0.273 0.313 0.335 0.360 0.373 0.382 0.10 0.596 0.676 0.719 0.765 0.789 0.804
75 75
0.30 0.50 0.10 0.275 0.300 0.334 0.352 0.371 0.381 0.388 0.30 0.50 0.10 0.645 0.712 0.747 0.781 0.799 0.809
100 250
0.30 0.258 0.284 0.321 0.341 0.363 0.374 0.382 0.30 0.616 0.689 0.728 0.768 0.788 0.800
0.10 0.245 0.272 0.310 0.331 0.355 0.368 0.377 0.10 0.593 0.670 0.712 0.755 0.778 0.792
60 150 0.70 0.50 0.20 0.291 0.320 0.361 0.383 0.408 0.421 0.430 60 375 0.70 0.50 0.20 0.686 0.767 0.811 0.857 0.881 0.896
0.30 0.267 0.297 0.340 0.365 0.393 0.409 0.420 0.30 0.642 0.728 0.777 0.830 0.859 0.878
200 0.10 0.250 0.279 0.323 0.349 0.380 0.398 0.410 500 0.10 0.608 0.698 0.750 0.808 0.840 0.861
0.50 0.50 0.20 0.285 0.313 0.351 0.371 0.394 0.406 0.414 0.50 0.50 0.20 0.672 0.747 0.787 0.828 0.850 0.863
cd/klm 0.30 0.264 0.292 0.333 0.356 0.381 0.396 0.405 cd/klm 0.30 0.633 0.714 0.759 0.807 0.832 0.848
30 15 0 0.10 0.248 0.276 0.318 0.342 0.371 0.387 0.397 30 15 0 0.10 0.603 0.687 0.735 0.788 0.817 0.835
(cd/1000 lm) CIE FLUX CODE (cd/1000 lm) CIE FLUX CODE
90° 90°
CIE FLUX CODE 55 91 98 100 63 CIE FLUX CODE 48 95 99 100 82
C 180° C 180°
180.0° 0.0° 180.0° 0.0°
0° SPACING – HEIGHT RATIO 0° SPACING – HEIGHT RATIO
90.0° 270.0°
SHR NOM 2.00 SHR MAX 2.10 SHR MAX TR 2.31 SHR NOM 1.75 SHR MAX 1.81
270° 270°
UTILISATION FACTOR – UF (Floor) γ°
UTILISATION FACTOR – UF (Floor)
γ°
REFLECTION FACTOR ROOM INDEX REFLECTION FACTOR ROOM INDEX
120 135 150 180 120 135 150 180
Ceiling Walls Floor 1.00 1.50 2.00 3.00 4.00 5.00 Ceiling Walls Floor 1.00 1.50 2.00 3.00 4.00 5.00
105 105
0.70 0.50 0.10 0.514 0.561 0.590 0.619 0.634 0.643 0.70 0.50 0.10 0.612 0.700 0.746 0.792 0.814 0.828
0.30 0.486 0.537 0.570 0.603 0.621 0.632 0.30 0.568 0.665 0.717 0.769 0.796 0.813
0.10 0.464 0.517 0.552 0.589 0.609 0.622 0.10 0.534 0.636 0.691 0.749 0.780 0.799
90 90
0.50 0.50 0.10 0.506 0.552 0.580 0.607 0.621 0.630 0.50 0.50 0.10 0.601 0.688 0.732 0.776 0.798 0.811
0.30 0.482 0.530 0.562 0.593 0.611 0.621 0.30 0.562 0.656 0.707 0.756 0.783 0.799
75 75
0.10 0.462 0.513 0.547 0.582 0.601 0.613 0.10 0.531 0.630 0.685 0.740 0.769 0.787
75 75
0.30 0.50 0.10 0.499 0.543 0.570 0.596 0.610 0.619 0.30 0.50 0.10 0.591 0.675 0.719 0.761 0.783 0.796
150 150
0.30 0.477 0.524 0.555 0.585 0.601 0.611 0.30 0.556 0.648 0.697 0.745 0.770 0.785
0.10 0.459 0.509 0.542 0.575 0.593 0.603 0.10 0.528 0.625 0.678 0.730 0.759 0.775
60 225 0.70 0.50 0.20 0.531 0.585 0.619 0.655 0.674 0.686 60 225 0.70 0.50 0.20 0.633 0.731 0.783 0.837 0.865 0.883
0.30 0.497 0.554 0.593 0.633 0.656 0.670 0.30 0.581 0.686 0.746 0.807 0.841 0.862
300 0.10 0.471 0.530 0.570 0.614 0.640 0.657 300 0.10 0.542 0.652 0.714 0.781 0.819 0.843
0.50 0.50 0.20 0.520 0.570 0.601 0.633 0.649 0.660 0.50 0.50 0.20 0.617 0.710 0.759 0.808 0.834 0.849
cd/klm 0.30 0.490 0.543 0.579 0.615 0.635 0.647 cd/klm 0.30 0.572 0.672 0.728 0.783 0.814 0.832
30 15 0 30 15 0
0.10 0.467 0.522 0.560 0.599 0.622 0.636 0.10 0.537 0.642 0.701 0.762 0.796 0.817
g GE Lighting 96
Photometric data
EB400H1 FGS40S P3
POLAR DIAGRAM NORMAL EFFICIENCY POLAR DIAGRAM NORMAL EFFICIENCY
OF OUTPUT ULOR 0.000 DLOR 0.737 LOR 0.737 OF OUTPUT ULOR 0.000 DLOR 0.726 LOR 0.726
(cd/1000 lm) CIE FLUX CODE (cd/1000 lm) CIE FLUX CODE
90° 90°
CIE FLUX CODE 65 96 99 100 73 CIE FLUX CODE 69 98 99 100 72
C C 180°
180°
180.0° 0.0° 180.0° 0.0°
0° SPACING – HEIGHT RATIO 0° SPACING – HEIGHT RATIO
SHR NOM 1.25 SHR MAX 1.36 SHR NOM 1.25 SHR MAX 1.47
270° 270°
UTILISATION FACTOR – UF (Floor) γ°
UTILISATION FACTOR – UF (Floor)
γ°
REFLECTION FACTOR ROOM INDEX REFLECTION FACTOR ROOM INDEX
120 135 150 180 120 135 150 180
Ceiling Walls Floor 1.00 1.50 2.00 3.00 4.00 5.00 Ceiling Walls Floor 0.75 1.00 1.50 2.00 3.00 4.00 5.00
105 105
0.70 0.50 0.10 0.564 0.636 0.674 0.713 0.733 0.745 0.70 0.50 0.10 0.497 0.566 0.636 0.671 0.708 0.726 0.737
0.30 0.526 0.606 0.648 0.693 0.717 0.732 0.30 0.457 0.531 0.607 0.647 0.689 0.711 0.725
0.10 0.497 0.581 0.626 0.676 0.703 0.719 0.10 0.428 0.503 0.584 0.627 0.673 0.698 0.713
90 90
0.50 0.50 0.10 0.554 0.626 0.662 0.699 0.718 0.730 0.50 0.50 0.10 0.489 0.557 0.626 0.659 0.694 0.712 0.722
0.30 0.520 0.598 0.639 0.682 0.705 0.719 100
0.30 0.453 0.525 0.600 0.639 0.678 0.700 0.712
100
0.10 0.494 0.576 0.620 0.668 0.693 0.709 0.10 0.427 0.501 0.580 0.621 0.665 0.688 0.703
75 75
0.30 0.50 0.10 0.545 0.614 0.650 0.686 0.705 0.716 0.30 0.50 0.10 0.482 0.549 0.615 0.648 0.682 0.699 0.709
200 200
0.30 0.515 0.591 0.631 0.672 0.694 0.707 0.30 0.450 0.520 0.593 0.630 0.669 0.689 0.700
0.10 0.491 0.571 0.614 0.659 0.684 0.698 0.10 0.425 0.498 0.575 0.615 0.657 0.679 0.692
300 60 300
60 0.70 0.50 0.20 0.582 0.664 0.707 0.755 0.779 0.794 0.70 0.50 0.20 0.510 0.585 0.664 0.704 0.749 0.771 0.785
0.30 0.538 0.625 0.674 0.728 0.757 0.776 0.30 0.465 0.543 0.627 0.673 0.724 0.751 0.769
400 0.10 0.504 0.596 0.647 0.705 0.738 0.760 400 0.10 0.432 0.511 0.599 0.647 0.703 0.733 0.753
0.50 0.50 0.20 0.568 0.646 0.686 0.728 0.750 0.764 0.50 0.50 0.20 0.500 0.572 0.646 0.683 0.723 0.744 0.756
cd/klm 0.30 0.530 0.613 0.658 0.707 0.733 0.749 cd/klm 0.30 0.459 0.535 0.615 0.657 0.703 0.727 0.742
30 15 0 30 15 0
0.10 0.500 0.586 0.634 0.688 0.718 0.736 0.10 0.430 0.507 0.590 0.635 0.685 0.713 0.730
EB400H4 VBSD40S
POLAR DIAGRAM NORMAL EFFICIENCY POLAR DIAGRAM NORMAL EFFICIENCY
OF OUTPUT ULOR 0.000 DLOR 0.761 LOR 0.761 OF OUTPUT ULOR 0.000 DLOR 0.835 LOR 0.835
(cd/1000 lm) CIE FLUX CODE (cd/1000 lm) CIE FLUX CODE
90° 90°
CIE FLUX CODE 46 88 99 100 76 CIE FLUX CODE 51 85 95 100 83
C 180° C 180°
180.0° 0.0°
0° SPACING – HEIGHT RATIO 180.0° 0.0°
0° SPACING – HEIGHT RATIO
SHR NOM 1.75 SHR MAX 1.84 SHR NOM 1.50 SHR MAX 1.64
270° 270°
UTILISATION FACTOR – UF (Floor) UTILISATION FACTOR – UF (Floor)
γ° γ°
REFLECTION FACTOR ROOM INDEX REFLECTION FACTOR ROOM INDEX
120 135 150 180 120 135 150 180
Ceiling Walls Floor 1.00 1.50 2.00 3.00 4.00 5.00 Ceiling Walls Floor 0.75 1.00 1.50 2.00 3.00 4.00 5.00
105 105
0.70 0.50 0.10 0.537 0.625 0.672 0.719 0.744 0.759 0.70 0.50 0.10 0.512 0.580 0.673 0.721 0.774 0.801 0.818
0.30 0.491 0.587 0.640 0.695 0.724 0.742 0.30 0.459 0.528 0.629 0.683 0.743 0.776 0.797
0.10 0.455 0.556 0.613 0.674 0.707 0.727 0.10 0.420 0.489 0.593 0.651 0.717 0.753 0.777
90 90
0.50 0.50 0.10 0.526 0.612 0.658 0.704 0.728 0.742 0.50 0.50 0.10 0.502 0.568 0.659 0.706 0.756 0.783 0.800
0.30 0.485 0.579 0.631 0.683 0.712 0.729 0.30 0.454 0.522 0.620 0.673 0.730 0.762 0.783
50 75
0.10 0.453 0.552 0.607 0.665 0.697 0.716 0.10 0.419 0.486 0.588 0.644 0.708 0.743 0.766
75 75
0.30 0.50 0.10 0.516 0.600 0.645 0.690 0.714 0.728 0.30 0.50 0.10 0.493 0.557 0.645 0.691 0.740 0.766 0.783
100 150
0.30 0.479 0.571 0.622 0.673 0.700 0.716 0.30 0.450 0.516 0.611 0.663 0.718 0.749 0.768
0.10 0.450 0.547 0.601 0.657 0.688 0.705 0.10 0.417 0.483 0.583 0.638 0.698 0.732 0.754
60 150 0.70 0.50 0.20 0.554 0.652 0.705 0.761 0.790 0.809 60 225 0.70 0.50 0.20 0.526 0.599 0.702 0.757 0.818 0.851 0.872
0.30 0.502 0.606 0.666 0.730 0.765 0.787 0.30 0.467 0.541 0.649 0.711 0.780 0.819 0.845
200 0.10 0.463 0.570 0.634 0.703 0.743 0.768 300 0.10 0.424 0.496 0.609 0.673 0.748 0.792 0.821
0.50 0.50 0.20 0.540 0.632 0.682 0.733 0.761 0.777 0.50 0.50 0.20 0.514 0.583 0.680 0.731 0.788 0.818 0.838
cd/klm 0.30 0.493 0.593 0.649 0.708 0.740 0.759 cd/klm 0.30 0.460 0.531 0.635 0.693 0.756 0.792 0.815
30 15 0 30 15 0
0.10 0.458 0.561 0.621 0.685 0.722 0.744 0.10 0.421 0.492 0.599 0.659 0.729 0.769 0.795
EB400S1 L4MD40S
POLAR DIAGRAM NORMAL EFFICIENCY POLAR DIAGRAM NORMAL EFFICIENCY
OF OUTPUT ULOR 0.000 DLOR 0.825 LOR 0.825 OF OUTPUT ULOR 0.000 DLOR 0.689 LOR 0.689
(cd/1000 lm) CIE FLUX CODE (cd/1000 lm) CIE FLUX CODE
90° 90°
CIE FLUX CODE 79 98 99 100 82 CIE FLUX CODE 38 77 94 100 68
C 180° C 180°
180.0° 0.0°
0° SPACING – HEIGHT RATIO 180.0° 0.0°
0° SPACING – HEIGHT RATIO
SHR NOM 1.00 SHR MAX 1.25 SHR NOM 2.00 SHR MAX 2.06
270° 270°
γ°
UTILISATION FACTOR – UF (Floor) UTILISATION FACTOR – UF (Floor)
γ°
REFLECTION FACTOR ROOM INDEX REFLECTION FACTOR ROOM INDEX
120 135 150 180 120 135 150 180
Ceiling Walls Floor 1.00 1.50 2.00 3.00 4.00 5.00 Ceiling Walls Floor 0.75 1.00 1.50 2.00 3.00 4.00 5.00
105 105
0.70 0.50 0.10 0.664 0.735 0.772 0.810 0.829 0.841 0.70 0.50 0.10 0.358 0.420 0.511 0.560 0.614 0.642 0.660
0.30 0.627 0.705 0.747 0.791 0.814 0.828 0.30 0.305 0.368 0.466 0.521 0.583 0.617 0.639
0.10 0.599 0.681 0.726 0.774 0.800 0.816 0.10 0.267 0.328 0.430 0.488 0.556 0.594 0.619
90 90
0.50 0.50 0.10 0.654 0.724 0.759 0.795 0.813 0.824 0.50 0.50 0.10 0.348 0.408 0.498 0.545 0.598 0.626 0.644
125
0.30 0.622 0.697 0.738 0.779 0.800 0.814 0.30 0.301 0.362 0.458 0.512 0.572 0.605 0.627
40
0.10 0.596 0.676 0.719 0.765 0.789 0.804 0.10 0.265 0.326 0.426 0.482 0.548 0.585 0.609
75 75
0.30 0.50 0.10 0.645 0.712 0.747 0.781 0.799 0.809 0.30 0.50 0.10 0.340 0.398 0.485 0.532 0.584 0.612 0.630
250 80
0.30 0.616 0.689 0.728 0.768 0.788 0.800 0.30 0.297 0.356 0.450 0.503 0.561 0.594 0.614
0.10 0.593 0.670 0.712 0.755 0.778 0.792 0.10 0.264 0.324 0.422 0.477 0.541 0.577 0.600
60 375 120
0.70 0.50 0.20 0.686 0.767 0.811 0.857 0.881 0.896 60 0.70 0.50 0.20 0.367 0.434 0.533 0.587 0.649 0.682 0.704
0.30 0.642 0.728 0.777 0.830 0.859 0.878 0.30 0.310 0.376 0.481 0.542 0.612 0.651 0.678
500 0.10 0.608 0.698 0.750 0.808 0.840 0.861 160 0.10 0.269 0.333 0.441 0.504 0.580 0.624 0.654
0.50 0.50 0.20 0.672 0.747 0.787 0.828 0.850 0.863 0.50 0.50 0.20 0.356 0.419 0.513 0.565 0.623 0.654 0.675
cd/klm 0.30 0.633 0.714 0.759 0.807 0.832 0.848 cd/klm 0.30 0.305 0.368 0.469 0.527 0.592 0.629 0.653
30 15 0 30 15 0
0.10 0.603 0.687 0.735 0.788 0.817 0.835 0.10 0.267 0.330 0.434 0.494 0.565 0.606 0.633
EB400S4 C4S40S
POLAR DIAGRAM NORMAL EFFICIENCY POLAR DIAGRAM NORMAL EFFICIENCY
OF OUTPUT ULOR 0.000 DLOR 0.821 LOR 0.821 OF OUTPUT ULOR 0.000 DLOR 0.750 LOR 0.750
(cd/1000 lm) CIE FLUX CODE (cd/1000 lm) CIE FLUX CODE
90° 90°
CIE FLUX CODE 48 95 99 100 82 CIE FLUX CODE 36 77 95 100 75
C 180° C 180°
180.0° 0.0°
0° SPACING – HEIGHT RATIO 180.0° 0.0°
0° SPACING – HEIGHT RATIO
SHR NOM 1.75 SHR MAX 1.81 SHR NOM 2.25 SHR MAX 2.38
270° 270°
UTILISATION FACTOR – UF (Floor) UTILISATION FACTOR – UF (Floor)
γ° γ°
REFLECTION FACTOR ROOM INDEX REFLECTION FACTOR ROOM INDEX
120 135 150 180 120 135 150 180
Ceiling Walls Floor 1.00 1.50 2.00 3.00 4.00 5.00 Ceiling Walls Floor 0.75 1.00 1.50 2.00 3.00 4.00 5.00
105 105
0.70 0.50 0.10 0.612 0.700 0.746 0.792 0.814 0.828 0.70 0.50 0.10 0.376 0.446 0.550 0.606 0.667 0.699 0.719
0.30 0.568 0.665 0.717 0.769 0.796 0.813 0.30 0.317 0.388 0.501 0.563 0.634 0.672 0.696
0.10 0.534 0.636 0.691 0.749 0.780 0.799 0.10 0.274 0.343 0.461 0.528 0.604 0.647 0.675
90 90
0.50 0.50 0.10 0.601 0.688 0.732 0.776 0.798 0.811 0.50 0.50 0.10 0.365 0.434 0.536 0.591 0.651 0.682 0.702
0.30 0.562 0.656 0.707 0.756 0.783 0.799 0.30 0.312 0.382 0.493 0.554 0.621 0.659 0.683
75 40
0.10 0.531 0.630 0.685 0.740 0.769 0.787 0.10 0.272 0.341 0.457 0.522 0.596 0.638 0.665
75 75
0.30 0.50 0.10 0.591 0.675 0.719 0.761 0.783 0.796 0.30 0.50 0.10 0.356 0.422 0.522 0.576 0.635 0.666 0.686
150 80
0.30 0.556 0.648 0.697 0.745 0.770 0.785 0.30 0.307 0.375 0.484 0.544 0.610 0.647 0.670
0.10 0.528 0.625 0.678 0.730 0.759 0.775 0.10 0.271 0.339 0.452 0.516 0.588 0.629 0.654
60 225 0.70 0.50 0.20 0.633 0.731 0.783 0.837 0.865 0.883 60 120 0.70 0.50 0.20 0.386 0.461 0.574 0.636 0.706 0.743 0.767
0.30 0.581 0.686 0.746 0.807 0.841 0.862 0.30 0.322 0.397 0.517 0.586 0.665 0.709 0.739
300 0.10 0.542 0.652 0.714 0.781 0.819 0.843 160 0.10 0.276 0.349 0.473 0.545 0.631 0.680 0.713
0.50 0.50 0.20 0.617 0.710 0.759 0.808 0.834 0.849 0.50 0.50 0.20 0.373 0.445 0.553 0.612 0.677 0.713 0.735
cd/klm 0.30 0.572 0.672 0.728 0.783 0.814 0.832 cd/klm 0.30 0.316 0.388 0.505 0.570 0.644 0.685 0.711
30 15 0 30 15 0 0.10 0.274 0.345 0.465 0.534 0.614 0.660 0.690
0.10 0.537 0.642 0.701 0.762 0.796 0.817
g GE Lighting 97
EUROFLUX
1100 550
1000 500
900 450
800 400
700 350
600 300
500 250
400 200
300 150
200 100
100 50
-80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 ° -80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 °
V = 0.0 V = 25.0 H = 0.0 V = 0.0 H = 0.0 V = 0.0 V = 20.0 H = 0.0 V = 0.0 V = 20.0 H = 0.0
cd/klm cd/klm cd/klm cd/klm
-80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 ° -80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 ° -80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 ° -80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 °
g GE Lighting 98
EUROFLUX
EF 40 Class: 0000 IP 65
422 225 230V 50Hz CEI 34.21 / EN 60598-1, IEC 598
EF40 250 S AS LU250/T/40 10,9 1 8 33714
EF40 250 S SM LU250/T/40 10,9 1 8 33716
392 EF40 250 M AS ARC250/T/H/742/E40 11,0 1 8 33723
505
EF40 250 M SM ARC250/T/H/742/E40 11,0 1 8 33730
EF40 400 M AS ARC400/T/H/742/E40 12,1 1 8 33738
EF40 400 M SM ARC400/T/H/742/E40 12,1 1 8 33740
EF40 400 S AS LU400/T/40 12,1 1 8 33731
440 50 EF40 400 S SM LU400/T/40 12,1 1 8 33734
EF40
EF40 600 S SM LU600/HO/T/40 13,9 1 8 33743
Complete with lamp.
300 190
EF 15 Class: 0000 IP 65
230V 50Hz CEI 34.21 / EN 60598-1, IEC 598
265
370
EF15 70 M AS ARC70/TD/742/RX7S 5,80 1 30 33691
EF15 150 M AS ARC150/TD/742/RX7S 7,10 1 30 33695
EF15 70 S AS LU70/90/T12/27 5,80 1 30 33690
EF15 318 40 EF15 100 M AS MXR100/U/27 6,20 1 30 33692
Complete with lamp.
Weight Pack Qty. Product
Type Description (kg) Box Code EF 15 Class: 0000 IP 65
230V 50Hz CEI 34.21 / EN 60598-1, IEC 598
Accessories
EF15 70 W CMH70/TD/UVC/942/Rx7s 5,80 1 30 38972
EF EF15 150 W CMH150/TD/UVC/942/Rx7s-24 7,10 1 30 38973
EFG 15 Wire guard for EF15 0,18 1 34090
Complete with lamp.
EFG 25 Wire guard for EF25 0,28 1 34092
EFG 40 Wire guard for EF40 0,34 1 34094
AS = Asymmetric SM = Symmetric M = Metal Halide Lamp S = High-Pressure Sodium Lamp
Spare parts W = White
EF
EFV 15 Front cover glass for EF15 0,80 1 34232
EFV 25 Front cover glass for EF25 0,90 1 34240
EFV 40 Front cover glass for EF40 0,97 1 34638
g GE Lighting 99
HALOPAK
Symmetrical beam floodlights for R7s-15 cap linear halogen lamps from 150W to 1500W.
Body: die-cast aluminium with powder paint finish with stainless steel external screw
and galvanised steel interior.
Front cover glass: 5 mm toughened glass mounted on die-cast aluminium frame with
painted finish; silicon rubber seal.
Reflector: symmetrical, in 99.8% pure polished anodised aluminium with hammered
finish.
Lampholder: ceramic.
Control gearbox: fibreglass-reinforced nylon, mounted on rear of luminaire body;
contains three-pole nylon terminal block and cable clamp.
C A Installation: by galvanised steel bracket.
Dimensions (mm)
Lamp position: horizontal ± 4°.
Type A B C D
B
D
HALOPAK 1 139 98 96 178
HALOPAK 3 185 151 139 246
HALOPAK 1000 345 230 180 365
68 3 x Ø8 HALOPAK 1500 408 230 180 365
V = 0.0 H = 0.0
cd/klm
1100
HALOPAK Class: I IP 55
1000
900
230V 50Hz CEI 34.21 / EN 60598-1
800
700
HALOPAK 1 BK K12 150W 78,3 mm 0,024 0,55 24 288 37181
600
500
HALOPAK 1 WH K12 150W 78,3 mm 0,024 0,55 24 288 37187
400
300
HALOPAK 3 BK K9 300W 117,0 mm 0,030 0,97 12 144 34588
200
100
HALOPAK 3 WH K9 300W 117,0 mm 0,030 0,97 12 144 34593
-80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 ° HALOPAK 1000 K4 1000W 189,1 mm 0,082 3,60 1 40 30637
HALOPAK 1500 K5 1500W 236,1 mm 0,099 4,00 1 40 30645
Complete with lamp.
HALOPAK 1500
Pack Product
cd/klm
V = 0.0 H = 0.0
Type Description Qty. Code
825
750
675
Spare parts
600
g GE Lighting 100
WH = white
MASTERPAK
153 182 Symmetrical beam floodlight for ARC70/TD/Rx7s double-ended metal halide lamps with
Rx7s cap, to be installed on normally inflammable surfaces. Auxiliary equipment is
contained in power supply box attached at the rear of fitting.
140
Body: die-cast aluminium with black polyurethane powder painted finish.
326 Front cover glass: toughened glass mounted in die-cast aluminium frame with painted
finish; silicon rubber seal.
Reflector: symmetrical, in 99.8% pure polished anodised aluminium with hammered
finish.
3 x Ø9 Lampholder: porcelain.
Power supply box: black fibreglass-reinforced nylon, complete with PG 11 cable clamp;
68
mechanically fixed to the body by stainless steel screws. Cover is hinged. The power
supply unit fixed to removable galvanised steel plate.
Installation: by galvanised steel bracket with black painted finish.
Lamp position: horizontal ± 45°.
MASTERPAK Class: I IP 55
230V 50Hz CEI 34.21 / EN 60598-1
MASTERPAK 70 ARC70/TD/Rx7s 81 0,042 3,15 1 30727
MASTERPAK 70
V = 0.0 H = 0.0
cd/klm
1100
800
Type Description Qty. Code
700
600
Spare parts
500
400
300
MASTERPAK 000
200
100
VHA 5 Front cover glass 1 7002511
-80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 °
PTL MTK 70 Lampholder 1 31057
GUAR HAL 501 Seal 1 31125
g GE Lighting 101
PF 4
204 464 Outdoor floodlights for 250W and 400W clear tubular bulb high-pressure sodium and metal
halide lamps.
Housing: heavy-duty die-cast aluminium, electrocoated grey powder finish. Safe ignition
from -20°C for metal halide and from -40°C for HPS lamps. Total front access via hinged
3
R39
521
600
and removable front door. Sight track for daytime aiming available.
Reflector: ALGLAS® finish polished aluminium.
216
Front door: 5 mm thick shock absorbing tempered glass in hinged die-cast aluminium
frame. Silicon rubber insulation between cover glass and reflector with charcoal filtering.
Lampholder: E40 porcelain, with nickel coated tempered brass sleeve and spring-loaded
51 Ø22 Ø14
bottom contact.
47,5 Power supply: 230V 50Hz – with power factor correction, cosϕ ≥ 0.9.
95
Installation: zinc plated steel frunion.
Installation height: 6÷18 m
PF 4 Class: I IP 55
Luminaire: PF4-M400/N
Lamp: HgMIF 400W MEEI 230V 50Hz
PF4-S250/N LU250/T/40 274 0,14 14.9 1 404875
PF4-S400/N LU400/T/40 435 0,14 16.2 1 404876
PF4-M250/N HgMIF250W/D 274 0,14 14.9 1 404877
PF4-M400/N HgMIF400W/DH; HgMIF400W 430 0,14 16.2 1 404878
250 N = narrow beam
500
750
1000
1250
C180
1500
C90
1750 270
2000
C0
2250cd/klm
g GE Lighting 102
EF 2000
EF 2000 floodlight family for outdoor installation, with 2000W double-ended metal hali-
342 650 de lamps with ceramic caps or max. 2000W tubular bulb metal halide or high pressure
sodium lamps with E40 caps. The lamp operating components are to be installed sepa-
rately, except the starter, which is integrated into the floodlight unless otherwise noted.
274
Designed for the illumination of large areas, EF 2000 luminaires are especially suitable
548 for large sporting facilities where excellent illumination, perfect beam control and opti-
602
mum colour rendering are required for colour TV recording and broadcasting.
Body: die-cast UNI 5076 aluminium with RAL 7038 grey polyester powder paint finish.
Painting is done by up-to-date DC galvanization process to maximise anti-corrosive
properties.
Ø15 Ø22 Ø15 A hinged door at the rear of the body allows access to the lamp without need to remove
the front cover glass. The door is equipped with a circuit-breaker, which cuts off the
150 150 lamp voltage at opening.
616
All the external screws are made of stainless steel.
Control gearbox: fibreglass-reinforced polyamid, mechanically fixed to the rear part of
body. Its cover is fixed by 4 stainless steel screws and provided with a PG 13.5 cable-
gland for entering the electrical supply cables of 9-13 mm.
Cover glass: 4 mm thick clear tempered glass, resistant against thermal and mechani-
cal shocks. The visor is fixed to the die-cast aluminium frame painted galvanically like
the body. An anti-aging silicone gasket is fitted between the body and frame.
Orientation: by means of a graduated scale for correct aiming of the luminaire.
Reflector: 99.85% pure anodised and polished aluminium, available for various light
distributions:
• rectangular beam, spot and flood in case of E40 capped lamps
• conical beam, ultra spot, spot, medium, medium-wide & wide in case of double-ended
lamps.
The reflector has an internal louvre, which provides excellent light pollution and glare
control.
Lampholder: ceramic, with clips to keep the lamp fixed in position.
Installation: by steel bracket painted like the body and provided with 3 mounting holes,
2 ( Ø 15 mm) for the lateral and 1 ( Ø 22 mm) for central mounting.
Burning position of the lamp axis: horizontal ±4° for double-ended types; any for E40
cap types.
Power supply box CSA: V0 self-extinguishing thermoset material.
Caution: Standard version of luminaire must not be operated at angles of inclination
higher then 140° in relation to the vertical axis. In case of higher degrees of inclination
or HOT RESTRIKE (HR) types, please contact GE Sales Office.
g GE Lighting 103
Surfaces Exposed Beam Weight Pack Qty. Product
Type Lamp to Wind (m2) (kg) Box Pallet Code
EF 2000 Class: IP 65
400V 50Hz CEI 34.21 / EN 60598-1 / IEC 598
EF2 US 2000 ULTRASPOT HSI TD 2000/D 0,295 Ultra-Spot 15,90 1 4 92634
EF2 S 2000 SPOT HSI TD 2000/D 0,295 Spot 15,90 1 4 92306
EF2 M 2000 MEDIUM HSI TD 2000/D 0,295 Medium 15,90 1 4 92307
EF2 MW 2000 MEDIUMWIDE HSI TD 2000/D 0,295 Medium-Wide 15,90 1 4 92635
EF2 W 2000 WIDE HSI TD 2000/D 0,295 Wide 15,90 1 4 92308
Complete with lamp.
32
EF2RX M 2000M MEDIUM MBIL2000/L/H/652/special Medium 15,90 1 4 92316
282 3
285
EF2RX W 2000M WIDE MBIL2000/L/H/652/special Wide 15,90 1 4 92315
Complete with lamp.
186 99
160
CSA CSP IM 2400 CSAM2000
CSAM1000
EF2US000
EF2US000 ULTRASPOT
ULTRASPOT
Ballasts
REATM2000 2000W 10,3A 400V SPL2000/I/T/H/960/E40 & HSI-TD2000/D Standard 17,1 1 96 91195
VV HH
cd/klm
25850
REATM1000 1000W 230V SPL1000/T/H/960/E40 & LU1000/T/40 Standard 10,2 1 96 91204
23500
21150
18800
2350
°
-80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80
Caution: Standard version of luminaire must not be operated at angles of inclination higher than 140° in relation to the vertical axis.
Rend. Tot 84.46%
LOR 84,46% In case of higher degrees of inclination, please contact GE Sales Office.
EF2S2000 SPOT
EF2S2000 SPOT EF2M2000 MEDIUM EF2MW2000 MEDIUMWIDE EF2W2000 WIDE
cd/klm
V
V H
H
cd/klm
V
V H
H
V
V H
H
cd/klm
V
V H
H
cd/klm
-80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 ° -80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 ° -80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 ° -80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 °
Rend. Tot 83,76% Rend. Tot 80,63% Rend. Tot 78,50% Rend. Tot 80,08%
LOR 83,76%
g GE Lighting 104
EUROSTREET
g GE Lighting 105
EUROSTREET
Weight Pack Qty. Product
Type Lamp (kg) Box Pallet Code
+15° -5°
ET25 125 H G H125 6,10 1 9 37209
ET25 125 H P H125 5,70 1 9 37210
ET25 70 S G LU70 5,70 1 9 37211
ET25 70 S P LU70 5,40 1 9 37212
ET25 100 S G LU100 6,10 1 9 37213
ET25 100 S P LU100 5,80 1 9 37215
ET25 150 S G LU150 7,40 1 9 37216
ET25 150 S P LU150 7,10 1 9 37217
Complete with lamp.
Accessories
EUROSTREET
BETA SP60 Wall mount receptacle Ø 60 mm 1,20 1 31732
ETF Photocell for ET25-ET40 0,30 1 37238
Spare parts
EUROSTREET
ETG25 Glass cover for ET25 0,76 1 37235
ETG40 Glass cover for ET40 1,06 1 37236
ETP25 Polycarbonate refractor for ET25 0,22 1 37237
90° 90°
ET 25 150 SG 180.0°
C
0.0°
ET 25 150 SP 180.0°
C
0.0°
180° 0° 180° 0°
150.0° 30.0° 150.0° 30.0°
90 90 90 90
75 75
75 75 75 75
150 150
60 225 60 60 225 60
300 300
cd/klm cd/klm
30 15 0 15 30 30 15 0 15 30
90° 90°
ET 40 250 SG 180.0°
C
0.0°
ET 40 400 SG 180.0°
C
0.0°
180° 0° 180° 0°
160.0° 20.0° 165.0° 15.0°
90 90 90 90
100 100
75 75 75 75
200 200
60 300 60 60 300 60
400 400
cd/klm cd/klm
30 15 0 15 30 30 15 0 15 30
g GE Lighting 106
EURO-7 & EURO-2
Applications
Street, roadway, highway, residential area and parking lot lighting.
Features
Dimensions (mm)
Type A B C
Weight Pack Product
Type Lamp (kg) Qty. Code
EURO-7 251 366 855
EURO-2 205 318 743 EURO-7 & EURO-2 Classe: I (Standard); II (on request)000IP 66 (optical compartment)
230V 50Hz IEC-CEI IP 44 (ballast comp. – Standard) IP 64 ballast comp. –on request)
EURO2 S70 LU70/90/T12/27 10.8 1 38589
EURO2 S100 LU100/100/T/40 11.5 1 38591
EURO2 S150 LU150/100/40 12.9 1 38592
EURO2 S250 LU250/T/40 14.3 1 38593
Tilting
Components
1. Top housing 6. Reflector
2. Bottom housing 7. Tempered curved glass lens
3. Front latch 8. Socket cannister
4. Slipfitter area 9. Die-cast reflector neck
5. Ballast components mounted on a tray 10. Stainless steel latches
Bushing
Slipfitter cover Perimetral gasket
Glass gasket
g GE Lighting 107
WALLIGHTER 175
Wall-mounted outdoor luminaires for 70W and 100W tubular clear bulb high-pressure
sodium lamps and 175W metal halide lamps.
Body: die-cast aluminium with electrocoat bronze finish. It contains a rear plate holding
the power supply unit with power factor correction, and a front unit housing the optics
197 367 and the front cover glass. The two parts are recessed and fastened each other with strong
galvanised steel screws. For maintenance, the supply unit can easily be accessed from
front.
Reflector: anodised and polished 99.8% aluminium.
327
Refractor: vandal-resistant polycarbonate, internally prismatic for optimal optical
performance, which enables larger distances between installation points. Smooth outer
surface for easy cleaning. Fastened to the body through silicon rubber gasket with two
galvanised screws
Lampholder: porcelain.
Maximum working ambient temperature: 40°C.
Power supply: 230V 50Hz, with power factor correction. Cable entry from the rear
ø 9mm break-through ø 19mm break- (Ø 22 mm central hole) or from side through Ø 19 mm break-through metal plate.
holes (4) for wall-mounting 35 max through hole for
16 min cable Break-through hole Installation: for wall mounting in a height of 3 - 7 m by means of four Ø 9 mm (or two
111
Ø 11 mm) break-through holes on the rear plate.
161
73 4
203
Spare parts
WALLIGHTER 175
W1LR-SCHERMO Refractor for Wallighter 175 0,90 1 7003027
g GE Lighting 108
WALLMOUNT 175
Wall-mounted outdoor luminaires for 70W and 100W tubular clear bulb high-pressure
sodium lamps and 175W metal halide lamps.
Housing: die-cast aluminium with electrocoat grey finish (type LU100 also with bronze
colour finish); ballast and the reflector are mounted on rear plate and hinged, easily
removable frontal frame holding glass refractor.
16
197 321 Front access to the ballast and the lamp.
Reflector: anodised and polished 99.80% aluminium.
202 Refractor: in borosilicate glass with prismatic reeding for optimum lighting distribution,
248
which enables larger distances between installation points. Silicone rubber gasket
insulation. Wire guard available.
Lampholder: porcelain.
Maximum working temperature: 40 °C.
Power supply: 230V 50Hz; with power factor correction. Cable entry from rear through
Ø 22 mm central break-through hole.
Installation: for wall mounting in height of 3 - 6 m, four Ø 8 mm holes on the rear.
ø 8mm break-through
holes (4) for wall-
mounting
111
147
73
ø 22mm break-through
holes for cable
Accessories
WALLMOUNT 175
WG-WM7 Wire guard from stainless steel 0,37 1 31168
Spare parts
WALLMOUNT 175
WM7M-SCHERMO Refractor for Wallmount 175 1,30 1 7003028
g GE Lighting 109
Lighting terminology
Illuminance (E)
The illuminance is the quantity of light incident on a given surface.
Unit of measure: lux (= lm/m2).
Visible radiation
The average illuminace of a surface: E = F/S, the ratio between the flux emitted
(F) and the extent of area (S) that receives this flux.
g GE Lighting 110
Lighting terminology - Lighting of indoor areas
Because S is known and E can be determined from the desired illuminance, 60° 60°
only the Fu “USEFUL LUMINOUS FLUX” should be calculated, this is the light
40° 40°
quantity, which will be applied on the S surface 20° 20°
0°
Fu = U x F TRANSVERSE AXIAL
The value of parameter U is called “UTILIZATION FACTOR” (less than 1). 0° – 180° 90° – 270°
1m
1m
g GE Lighting 111
Lighting terminology
105
120 135 150 180 150 135 120
105 550
C = 90
500 C=0
450
90 90
400
350
75 75 300
250 C = 180
200
60 60
150
100
50
C = 270
30 15 0 15 30 -80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 °
6
°
75 4 75 4
3 3
a a
65 2 hs 65 2 hs
55 55
45 1 45 1
1000 2 3 4 5 6 8 10000 20000 30000 1000 2 3 4 5 6 8 10000 20000 30000
C = 90° C = 90°
C = 0° C = 0°
C = 180° C = 180°
C = 270° C = 270°
g GE Lighting 112
Lighting terminology
60°
41,4°
FC1 FC2
90°
75,5°
g GE Lighting 113
Standards
Marking F
(CEI EN 60598-1 Annex N)
When a luminaire has an F mark, it means that this luminaire can be installed
on normally inflammable surface.
Normal inflammable surfaces are those, which contain such construction
materials as wood and wooden materials the thickness of which is above than
2 mm.
g GE Lighting 114
Standards
Protection degree IP
(CEI EN 60598-1 Section 9 / Annex J) IP
PROTECTION AGAINST ENTRY OF PROTECTION AGAINST ENTRY OF
1st DIGIT SOLID FOREIGN OBJECTS 2ND DIGIT LIQUID FOREIGN OBJECTS
0 0
No protection. No protection.
1 1
Protection against entry of solid objects larger than Protection against vertically dripping liquid.
50 mm; parts of the body such as hands, feet, etc. or
any other foreign object with dimensions equal to or
greater than 50 mm can not enter.
Protection against entry of solid objects larger than Protection against dripping liquid falling within a 15°
Protection against entry of solid objects larger than Protection against rain; dripping liquid falling within a
4 4
Protection against entry of solid objects larger than Protection against water spray from any direction.
1 mm; tools, wires or any other objects with a diameter
equal to or greater than 1 mm can not enter.
5 5
Partial protection against the entry of dust. Total Protection against water jets from any direction.
protection against all accidental contact. Quantity of
dust entering must not impair regular operation of
equipment.
Total protection against the entry of dust and all Protection against waves.
6 accidental contact.
6
7
Protection against temporary immersion; sufficient
water to cause damage can not enter the equipment in
determined pressure conditions for a certain period of
time.
8
Protection against submersion; sufficient water to
cause damage can not enter the equipment in condi-
tions to be specified and for an unlimited period of
time.
g GE Lighting 115
Standards
Extract from CEI 64-2 standard Parts in AD-FT equipment which can generate arcs or sparks during normal
operation or exceed the highest temperature permissible by dangerous
relating to safety equipment materials considered, protection cover must be used the level of protection of
which complies with the marked values given in the table excepting the case of
Functionally protected equipment (AD-F) equipment installed in air-conditioned environments where other standards
An electrical equipment is called a “functionally protected equipment” when must be considered.
its individual parts are provided with a protection appropriate to the
characteristics of risk in such a way that the whole equipment represents a Type of electrically protected equipment AD-F (1.5.05)
given level of protection against the risk factors, which may possibly occur in AD-FE AD-FT
the installation environment. Based on the risk characteristics, the equipment Art. 1.05.06 Art. 1.05.07
Chapter XI Chapter XII
can be classified as follows:
prescribed
level of protection
Zone AD
1. Explosion-proof functionally protected equipment Class of dangerous place qualification IP 55 IP 44
(AD-FE), are electric equipment where: CLASS O (Section II 64/2) division 1
division 2
• In case of parts which can generate arcs or sparks during normal operation CLASS I (Section III 64/2) division 0
or exceed the highest temperature permissible by risk materials division 1
considered, precautions are taken preventing to set fire out of safety cover division 2
during the above operation. In addition, the safety cover resists energy reference division
CLASS 2 (Section IV 64/2) conducting dust
effects, which may occur inside the safety cover within the intervention not conducting dust
limits of electric protection in case of failures originated or started from CLASS 3 (Section V 64/2)
the electric circuit.
SATISFACTORY: electrical equipment type marked on top of
• For parts precautions are taken to prevent failures or circumstances occur
column considered as minimum satisfactory type for the case.
which can fire dangerous materials.
REDUNDANTLY: electrical equipment type marked on top of
column considered as redundantly satisfactory type for the case.
2. Sealed functionally protected equipment (AD-FT)
are electric equipment where:
• In case of parts which can generate arcs or sparks during normal operation
or exceed the highest temperature permissible by risk materials Class of temperature
considered, protection cover is used the level of protection of which (CEI EN 50014 - CEI 31-8)
prevents such parts to contact dangerous materials.
• In case of all other parts, dimensioning and preventing measures against Manufacturer of parts of electric equipment installed in explosion-risk environ-
environmental effects are taken (e.g. NPGTW polycarbonate overtube must ments must fully and exactly determine the protection of equipment against
be used for NPW), and installation methods are used which can prevent explosion. Especially equipment in group II (installation of electric equipment
failures or operation circumstances causing the dangerous materials that used in potential explosion-risk environments excluding mines of firedamp) is
are possibly in contact the parts or placed near by them, can fire. advisable classified into one of the following classes of temperature:
T1 450°C
T2 300°C
T3 200°C
T4 135°C
T5 100°C
T6 85°C
g GE Lighting 116
Technical information
Luminaires with electronic gear Lower power consumption of system, because electronic gears consume
less power than traditional ones and the power loss is only 8-10% of the lamp
1. 22% energy saving power in case of electronic gears.
2. No stroboscopic effect, no flickering
3. Higher luminous efficacy
4. Power factor of > 0.95
Power ballance of a twin-lamp luminaire (2x36W)
5. Starting immediately without blinking
6. No flashing in case of lamp burns out (automatically disconnected) Power loss, traditional Energy saving 9%
ballast ,10W
7. Lower operating temperatures Power loss, low-loss ballast, 6W Energy saving 22%
Power loss, traditional
8. Silent operation ballast , 10W Power loss, low-loss ballast, 6W
The lamp will be ignited by a starting voltage generated inside the lamp. As
opposed to the traditional power supply unit, no correction is needed, because
the power factor is > 0.95.
Lamp power Lamp power Lamp power
cca. 36W cca. 36W 32W
Electronic gears have several advantages compared to the traditional ones:
Fluorescent lamps operate on high frequency, which has a positive effect
on the luminous efficacy (it is more than 10% higher than that of traditional
92W 84W 72W
ballast) and decreases the consumed power compared to the 50 Hz mains 2 traditional ballasts 2 low-loss ballasts 1 electronic gear
power consumed in case of same luminous flux.
Cost savings of re-lamping; considerably longer life owing to the high- No flickering, no stroboscopic effect owing to the high frequency
frequency operation (average rated life can increase even by up to 50% operation.
depending on the type of luminaires and the rhythm of swithing-on), therefore Ignition immidiately without blinking.
the mortality will be significantly lower.
Decrease of luminous flux
100%
Electronic gear
90%
Lamp life Economy
Electronic gear Traditional ballast
100%
Traditional ballast 80%
90%
80%
Traditional ballast Operating time 5000 h 10000 h
Low-loss ballast Electronic gear
Operable lamps
Cost of lighting
g GE Lighting 117
Technical information
• “Work places, where workers are exposed to special hazards when the
artificial lighting fails, must be provided with emergency lighting of sufficient
CARBON FILTER: advantages for optics
light intensity” (Article 33 38.3). of luminaires
GE Lighting’s emergency lighting equipment can be divided into two groups: Even a light, thin film of contaminants accumulated on the reflector of a
Equipment with permanent operation: where the emergency lamps gets luminaire can cause a significant loss in light output. Even under ideal cleaning
always supply voltage either normal or emergency lighting is needed. conditions and using the best known cleaning materials, contamination on a
reflector is extremely difficult to remove once it is “backed on”.
Combined emergency luminaire can contain one or more standard lamps. In the field it is very difficult to restore a reflector to its original condition due to
Equipment with non-permanent operation: where the emergency lamps permanent damage imparted during cleaning.
operate only when the normal lighting is out of order. In a water-tight luminaire sealed by appropriate gaskets and incorporated a char-
coal filter, contamination of the optics will reduce the light output by average of
IMPORTANT: read carefully the installation instructions, which can be found 1% per year compared to the 4-5% common in case of luminaires without filters.
in all packaging and keep them exactly when installing or wiring the equip- Optics can be contaminated also by solid particles (dust) and gases and vapours.
ment. Especially vapours can corrode the optics and forms a coating backed on by the
heat of lamp. The chemical analysis of the accumulation has revealed not burned
carbohydrates, nitrogen dioxide and sulphur dioxide. As a matter of fact, the
“self-regenerating” charcoal filter seems to be the only effective tool against the
above materials (gases and vapours), because when the optics compartment
inhaust the air filled with them, the filter can absorb them in large quantity.
When luminaire will be switched on, the exhausted hot air can clean the filter.
TOTAL LIGHT OUTPUT The figure shows the favourable effect of a charcoal filter on total light output.
100 RELAMP The lamp depreciation is 6% per year (dotted line), the depreciation of optical
98%
FILTERED
% OF ORIGINAL LAMP & LUMINAIRE OUTPUT
LAMP ONLY assembly is 5% for a non-filtered luminaire versus 1% per year for a filtered
90
87% luminaire. Therefore, if a new lamp is installed and the reflector is cleaned at the
RELAMP end of an assumed four-year re-lamping interval, the efficiency of a filtered
80 UNFILTERED
FILT
ERE
D 73%
luminaire (which was decreased to 73%) can bring significantly up to 98% of the
70
UNFILTERED
original value (or to 87% in case of non-filtered luminaire).
61.9%
60
50
0 1 2 3 4 5
YEARS
g GE Lighting 118
Resistance to chemical attack
Resistance of materials
generally used for water-proof CHEMICAL AGENTS Metacrylate Polycarbonate Polyester
luminaires to chemical agents
Inorganic acids
accumulator acid R. R. R.
bromic acid N.R. N.R. N.R.
Before installing any lighting equip- hydrocloric acid, up to 20% R. R. R.
ment, make sure that the atmosphere hydrocloric acid, above 20% R. R.L. R.
does not contain vapours and/or nitric acid, up to 10% R. R. R.
nitric acid, 10% - 20% R.L. R.L. R.L.
chemical agents, which can damage nitric acid, above 20% N.R. N.R. N.R.
the materials of luminaire compo- hydrogen sulfid acid R. R. R.
nents: polycarbonate, methacrylate sulfuric acid, up to 50% R. R. R.
sulfuric acid, upt ot 70% R.L. R.L. R
and polyester. The values in the table sulfuric acid, above 70% N.R. N.R. N.R.
below are valid for ambient tempera- sulforous acid, 5% R.L. N.R. R.L
tures of below 40 °C and if there are Organic acids
no mechanical effects, which can acetic acid, up to 5% R.L. R R
acetic acid, up to 30% N.R. R.L. R
cause pressure concentrations, hair butyric acid N.R. R.L. R
cracks or steady-state elongation of citric acid R.L. R R
surface. lactic acid R.L. R R
Alcohols
LEGEND: alcohol, up to 30% R. R. R.
alcohol, concentrated N.R. N.R. N.R.
R. = RESISTANT methanol N.R. N.R. N.R.
R.L. = LIMITED RESISTANCE glycerine R. R.L. R.
N.R. = NO RESISTANCE glycol R. R. R.
Bases
ammonia, 25% R. N.R. N.R.
white lime R. R.L. R.
synthetic bases R. R.L. R.
caustic soda, up to 2% R. N.R. R.L.
caustic soda, up to 10% R. N.R. N.R.
Gases
carbon dioxide R. R. R.
carbon monoxide R. R. R.
Hydrocarbons
benzene N.R. N.R. N.R.
Diesel fuel R. R.L. R.
petroleum ether R. R.L. R.
aliphatic hydrocarbons R.L. R. R.L.
aromatic hydrocarbons N.R. N.R. R.L.
Oils
aniline N.R. N.R. N.R.
machine-tool oils N.R. N.R. R.
Diesel oils N.R. N.R. R.
brake fluid N.R. N.R. N.R.
combustible acidous oils N.R. R.L. R.
camphor oil N.R. N.R. N.R.
sewing-machine oil R.L. R. R.
silicone oil R. R. R.
paraffin oil R.L. R. R.
saturated mineral oils N.R. N.R. R.L.
Aqueous solutions
sea water R. R. R.
hydrogeneperoxide, up to 40% N.R. R.L. N.R.
hydrogeneperoxide, above 40% R.L. R.L. N.R.
metallic salts and their liquid solutions R. R. R.
salt solutions R. R. R.
Solvents
acetones N.R. N.R. N.R.
ketones N.R. N.R. N.R.
chlorophenol N.R. N.R. N.R.
chloroform N.R. N.R. N.R.
methylene chloride N.R. N.R. N.R.
dioxane N.R. N.R. R.
ether N.R. N.R. R.L.
ethyl acetate N.R. N.R. N.R.
phenol N.R. N.R. N.R.
methyl ethyl ketone N.R. N.R. N.R
terpentine oil R.L. R.L. R.
pyridine (tertiary amine) N.R. N.R. N.R.
carbon tetrachloride N.R. N.R. R.
xylene N.R. N.R. N.R.
g GE Lighting 119
LIGHTING PROJECTS FOR SPORTING FACILITIES
The constantly growing popularity of leisure-time sporting activities has led to an intensive
use of sporting facilities during the evening hours. For this reason, there is today a need
not only for the construction of professional sporting complexes, but also for more modest
centres for amateur use.
While the larger structures for professional use are normally created by engineering firms,
the building of smaller centres for hosting minor tournaments, competitions or simply
leisure time sports is usually entrusted to medium/small installation companies that must
nonetheless be able to guarantee a suitable lighting system to the facility. The aim of this
publication is to lend a hand in achieving such an end.
Deviation
Rotazione "Z" Elevation
Rotazione "X"
y
α
0°
1 2 Angle of di
Angolo elevation
rotazione "X"
x x 90° -90°
1 2
180°
y Angle
Angoloofdideviation
rotazione "Z"
Desig solution
Disegno in pianta 1 = 20° 2 = -30° Cross-section
Sezione
g GE Lighting 120
LIGHTING PROJECTS FOR SPORTING FACILITIES
Outdoor Indoor
Ave. horizontal illuminance (lux) Ave. horizontal illuminance (lux)
1 2 3 1 2 3
Activity E min/med E min/med E min/med E min/med E min/med E min/med
3000 -
No. of spectators No. of spectators < 10000 < 20000 > 20000
FOOTBALL < 3000 - 5000 < 10000 < 20000 > 20000 FOOTBALL
FIGC Ave. illuminance UEFA Spectator most distance from centre 130 m 150 m 180 m
100 150 250 400 800
Lux Ave. illuminance Acceptable 150 250 400
Lux Recommended 250 400 800
g GE Lighting 121
LIGHTING PROJECTS FOR SPORTING FACILITIES
1 5 4 1
3
5
25
2 4 3 2 27,5
65
x x 27,5 105
2 25
3 2
5
1 Misure
Measurements in mmin m
3
4 1 Symmetric
Simmetrico diffused
diffondente
Symmetric concentrated
Simmetrico concentrante
Reference
Palo pole
di riferimento
Simmetria
Symmertypuntamenti
orientation in
SoluzioneNo.
n. 11 y SoluzioneNo.
n. 22 rispetto
Solution Solution relationassi (x-x) (y-y)
to axes (x-x) (y-y)
1 82 OQ 2000 12 SPL2000/T/H 16 3 0,47 1=35° 2=-5° 3=-50° 1=65° 2=65° 3=65° 24,7
0,35
2 105 OQ 2000 16 SPL2000/T/H 20 4 0,68 1=50° 2=30° 3=-25° 1=55° 2=65° 3=60° 33,0
0,50 4=-50° 4=55°
3 139 OQ 2000 20 SPL2000/T/H 20 5 0,65 1=55° 2=30° 3=0° 1=50° 2=65° 3=55° 41,2
0,42 4=-30° 5=-60° 4=65° 5=55°
4 240 ULTSW01 16 MQI2000/T9/40 24 4 0,52 1=50° 2=30° 3=-25° 1=45° 2=60° 3=60° 33,0
0,33 4=-50° 4=50°
4
5 6
1 1
5
5
4 5
3
2 3 2
x x
65
3 1 105
1
2 5
5
4 MeasurementsMisure
in mm in m
2
Symmetric
Simmetrico diffused
diffondente
3 4
5 Symmetric concentrated
Simmetrico concentrante
Palo di riferimento
Reference pole
Simmetria
Symmertypuntamenti
orientation in
y SoluzioneNo.
n. 66 rispetto
Soluzione
Solution n. 55
No. Solution relationassi
to (x-x)
axes(y-y)
(x-x) (y-y)
5 99 OQ 2000 16 SPL2000/T/H 20 4 0,78 1=-25° 2=-55° 3=-60° 1=60° 2=70° 3=60° 33,0
0,60 4=-70° 4=70°
6 122 OQ 2000 20 SPL2000/T/H 20 5 0,71 1=-20° 2=-50° 3=-50° 1=60° 2=60° 3=70° 41,2
0,55 4=-65° 5=-80° 4=70° 5=70°
7 149 OQ 2000 24 SPL2000/T/H 24 6 0,72 1=-35° 2=-25° 3=-50° 1=50° 2=60° 3=65° 49,4
0,52 4=-65° 5=-65° 6=-80° 4=55° 5=70° 6=70°
8 265 ULTSW01 20 MQI2000/T9/40 24 5 0,60 1=-50° 2=-20° 3=-50° 1=55° 2=60° 3=70° 41,2
0,42 4=-65° 5=-80° 4=70° 5=70°
g GE Lighting 122
LIGHTING PROJECTS FOR SPORTING FACILITIES
Solution
SoluzioneNo. 11
n. 11 Solution
SoluzioneNo. 12
n. 12
y
2 1
3
1 10
4 10
20
10 40
2 3 10
x x
3
MeasurementsMisure
in mm in m
1 1
2
3 2
Symmetric
Simmetrico diffused
diffondente
Asymmetric
Asimmetrico
Reference
Palo pole
di riferimento
Symmertypuntamenti
Simmetria orientation in
Soluzione n. 99 y SoluzioneNo.
n. 10 relationassi
rispetto to (x-x)
axes(y-y)
(x-x) (y-y)
Solution No. Solution 10
7
Solutions
Soluzione n.No.
15 e1516& 16
2,5
2,
5
x x
20
40
Misure in m
Measurements in mm
2,5
2
Symmetric diffused
Simmetrico diffondente
Compak
Compak
Symmertypuntamento
Simmetria orientation in
relation to axes (x-x)
posizionamento
Soluzione n.No.
Solutions 13 e1314& 14 rispetto assi (x-x)
g GE Lighting 123
LIGHTING PROJECTS FOR SPORTING FACILITIES
4
3
18
11
1 3
2 3
4
MeasurementsMisure
in mm in m
x x
1 1
2 2
Symmetric
Simmetrico diffused
diffondente
Asymmetryc
Asimmetrico
Reference
Palo pole
di riferimento
Simmetria
Symmerty puntamenti
orientation in
y
SoluzioneNo.
Solution n. 1717 Soluzione No.
Solution n. 1818 rispetto
relationassi
to (x-x)
axes(y-y)
(x-x) (y-y)
17 138 EF40 250M SM 8 ARC250/T/H 10 2 0,78 1=0° 2=-40° 1=40° 2=45° 2,2
0,70
18 210 EF40 400M SM 8 ARC400/T/H 10 2 0,82 1=0° 2=-40° 1=40° 2=45° 3,4
0,73
19 280 EF40 400M SM 12 ARC400/T/H 12 3 0,86 1=15° 2=-10° 3=-40° 1=30° 2=35° 3=40° 5,1
0,77
20 239 OTQ 1000 4 SPL1000/T/H 12 1 0,74 1=0° 1=5° 4,2
0,58
Solution
SoluzioneNo. 23
n. 23
24
4
1 2 3
12
11
0
4
MeasurementsMisure
in mm in m
x x
1 2 3 4 5 6
Symmetric
Simmetrico diffused
diffondente
Asymmetric
Asimmetrico
Reference
Pali pole
di riferimento
Symmertypuntamenti
Simmetria orientation in
SoluzioneNo.
Solutions n. 2121e &
2222 relation to axes (x-x)
posizionamenti
rispetto assi (x-x)
21 190 EF40 250M SM 12 ARC250/T/H 10 2 0,92 1=0° 2=-30° 3=30° 1=35° 2=40° 3=40° 3,3
0,78 4=-30° 5=30° 6=0° 4=40° 5=40° 6=35°
22 286 EF40 400M SM 12 ARC400/T/H 10 2 0,91 1=0° 2=-30° 3=30° 1=35° 2=40° 3=40° 5,1
0,81 4=-30° 5=30° 6=0° 4=40° 5=40° 6=35°
23 341 OTQ 1000 6 SPL1000/T/H 12 1 0,78 1=0° 2=0° 3=0° 1=5° 2=5° 3=5° 6,3
0,65
g GE Lighting 124
LIGHTING PROJECTS FOR SPORTING FACILITIES
2 3
1 4
3,
5
36
3
x x 18
3,
5
MeasurementsMisure
in mm in m
1 2 5 6
Symmetric
Simmetrico diffused
diffondente
3 4
Asymmetric
Asimmetrico
Pali di riferimento
Reference pole
Simmetria
Symmertypuntamenti
orientation in
posizionamenti
relation to axes (x-x)
Solution n.No.
Soluzione 24 24 rispetto assi (x-x)
Ave horizontale Pole Uniformity Power
illuminance N° of height N° of luminaires E min/med required
(lux) Luminaire luminaires Lamp (m. a. g.) each pole E min/max Deviation Elevation (kW)
24 163 EF40 400M SM 12 ARC400/T/H 12 3 0,70 1=0° 2=-15° 3=-35° 1=45° 2=45° 3=45° 5,1
0,59 4=35° 5=15° 6=0° 4=45° 5=45° 6=45°
25 269 OTQ 1000 8 SPL1000/T/H 12 2 0,79 1=0° 2=-15° 3=15° 1=10° 2=10° 3=10° 8,4
0,68 4=0° 4=10°
1 2 3
3,
5
24
36
x x
12
0
3,
5
MeasurementsMisure
in mm in m
1 6
2 3 4 5
Symmetric
Simmetrico diffused
diffondente
Asymmetric
Asimmetrico
Pali di riferimento
Reference pole
Simmetria
Symmertypuntamenti
orientation in
posizionamenti
relation to axes (x-x)
Solution
SoluzioneNo.
n. 2626 rispetto assi (x-x)
26 148 EF40 400M SM 12 ARC400/T/H 12 2 0,71 1=0° 2=-20° 3=20° 1=45° 2=45° 3=45° 5,1
0,61 4=-20° 5=20° 6=0° 4=45° 5=45° 6=45°
27 189 OTQ 1000 6 SPL1000/T/H 12 1 0,75 1=0° 2=0° 3=0° 1=5° 2=5° 3=5° 6,3
0,63
g GE Lighting 125
Spare parts
g GE Lighting 126
Spare parts
g GE Lighting 127
Product code index
g GE Lighting 128
Product code index
g GE Lighting 129
Product code index
g GE Lighting 130
Product code index
g GE Lighting 131
Product code index
g GE Lighting 132
Lighting Fixtures catalogue GE Lighting in Eastern Europe
Bulgaria Romania
GE Hungary Rt. GE Romania SRL
Representative Office Besta Center
15 Zar Assen, 1st floor Str. Constantin Apostol nr. 10, etaj 4,
1680 Sofia Sector 6
Tel: (359) 2 981 3492 Bucuresti
Fax: (359) 2 981 3492 Tel: (40) 1 413 3328, 2247
gelsbg@datacom.bg Fax: (40) 1 413 5386
GE Lighting can offer proper ge@fx.ro
CIS
answers for all lighting issues. GE Hungary Rt. Slovakia
Our environment needs not Representative Office GE Hungary Rt.
Kosmodamianskaya nab. 52 Representative Office
only good but efficient Building 1, 6th Floor Prievozska 14/A
lighting, as well. Moscow 113054, Russia 82109 Bratislava
Tel: (7) 095 935 7281 Tel: (421) 7 5823 8185
Through using our products, Fax: (7) 095 935 7279 Fax: (421) 7 5823 8186
you can get the real solution gelight@ba.sknet.sk
Croatia
for your all requirements GE Hungary Rt. Slovenia
relating to illumination and in Representative Office GE Adria d.o.o.
Marticeva 73 Dunajska 22
addition, your costs will 1000 Zagreb 1511 Ljubljana
decrease considerably. Tel: (386) 61 474 4562 Tel: (386) 61 474 4562
GE Lighting Plant Fax: (386) 61 431 6216 Fax: (386) 61 431 6216
Cavazzale (Vicenza) – Italy info@geadria.si info@geadria.si
GE Lighting is constantly
Czech Republic Ukraine
developing and improving its GE Lighting spol. s.r.o. General Electric Co.
products. For this reason, all Jihlavská 2 42/14 Shelkovichnaya str.
664 41 Brno-Troubsko Kiev 01004
product description in this Tel: (420) 5 472 27951 Tel: (38) 044 490 6983
catalogue are intended as a Fax: (420) 5 472 27955 Fax: (38) 044 490 6982
ge_light@i.kiev.ua
general guide, and we may Estonia, Latvia, Lithuania
change some specifications GE Hungary Rt. Yugoslavia
Representative Office in the Baltic States GE Hungary Rt.
from time to time in the Elizabetes 2 Representative Office
interest of product LV 1340 Riga, Latvia Kolarceva 7
Tel: (371) 7 321 710 11000 Beograd
improvement. Fax: (371) 7 321762 Tel: (381) 11 324 8239
ge@apollo.lv Fax: (381) 11 324 8432
gelbgd@eunet.yu
By presenting this detailed Hungary
information about GE lighting GE Lighting Plant GE Hungary Rt.
Tungsram Lighting
fixtures, our aim is to help our Coslada (Madrid) – Spain Váci út 77.
customers to arrange the H-1340 Budapest
Tel: (36) 1 399 1100
illumination of their Fax: (36) 1 399 1672
environments in the best way.
Kazakhstan
If you have any further GE Hungary Rt.
question, please contact our Representative Office
153 Abaya Avenue, ap. 14
local representative in your 480024 Almaty
region on phone number in Tel: (7) 3272 509 833
Fax: (7) 3272 400 558
the back cover of this
catalogue. Macedonia
GE Hungary Rt.
Representative Office
Belasica BB
Skopskie Saem
81000 Skopje
GE Lighting Plant Tel: (389) 70 217 649
Fax: (389) 91 386 125
Hendersonville, North Carolina – USA
Poland • GE Lighting is constantly developing and improving its
General Electric Co. Polska Sp.z.o.o. products. For this reason, all product description in this
ul. Szwolezerów 10 catalogue are intended as a general guide, and we may
00-464 Warsaw change some specifications from time to time in the
Tel: (48) 22 8415 201 interests of product improvement.
Fax: (48) 22 8419 365 • Technical drawings in this catalogue are not to scale.
• Dimensions are expressed in mm.
Printed in Hungary
e GE Lighting
12/2001 English
e and General Electric are both registered trademarks of the General Electric Company, USA