1-1
SM series Hall sensor is a kind of magnet-sensitive sensor consisting of voltage regulator, Hall voltage generator, differential amplifier, Schmidt trigger and the output pole of collector open circuit. Its input is the magnetic flux density. The output is adigital voltage signal.
Features
Wide mains voltage range High frequency Long service life, compact volume, and convenient mounting Directly connect to transistor and logic circuit port like, TTL.MOS
Overall dimensions
Detection distance Mains voltage Detectable object Output low level voltage Output hegh level voltage Mains current ON-OFF frequency Working point magnetic density Shell meterial Ambient temperature Protection strucure NPN NO Model available PNP NO NPN NC PNP NC SM8-31010NA SM8-31010PA SM12-31010NA SM12-31010PA SM12-31010NB SM12-31010PB
10mm 5~24VDC Permanent magnet 200mV 0.1uA 8mA 320KHz 32mT Metal -25oC~70oC IEC standard IP67
Sensor
Inductive linear sensor Inductive linear sensor
Work principle
1-1
Inductive proximity switch with analog quantity output has the similar work principle with general inductive proximity switch.The energy of oscillator system decreases when a metal object approaches the inductive side.The energy decrease degree indic ates the distance between the metal object and thesensor.The energy consumption is transformed into measuring sign in an additional device and magnified through linear treatment.(Fig.5) Provide a standard analog signal at output terminal(0-5V or 4-20mA)
http://www.greegoo.com
Sensor
Inductive linear sensor
1-
Category
Detectable object Detection distance Nodel available Voltage range Consumption at the time of detection at the time of nondetection Current type Voltage type Current type Voltage type Current type Voltage type
Flush:5mm XM18-3005PMI XM18-3005PMU Non-flush:8mm XM18-3008PMI XM18-3008PMU Flush:10mm XM24-3008PMI XM24-3008PMU
Metal Non-flush:15mm XM24-3010PMI XM24-3010PMU Flush:10mm XM30-3010PMI XM30-3010PMU Non-flush:15mm XM30-3015PMI XM30-3015PMU
Sensor
Inductive linear sensor
1-
Detectable object Detection distance Nodel available Voltage range Consumption at the time of detection at the time of nondetection Current type Voltage type Current type Voltage type Current type Voltage type
Flush:15mm XMF10-3015PMI Non-flush:20mm XMF10-3020PMI Flush:15mm XMF37-3015PMI
XMF10-3015PMU XMF10-3020PMU XMF37-3015PMU XMF37-3020PMU XMF38-3040PMU XMF38-3050PMU 15~30VDC 200mA4mA 20mA 0~300 2.2K 4~20mA 0-5V/0-10v
Allowable voltage undulation Output signal Linear error Ambient temperture Shell material Protection grade
Sensors
Photoelectric Switch
Photo Sensor (G50 Series)
Type
Model Dimensions
1-1
Detecting distance Detecting target Hysterisis Response time Power supply Sensitivity Operating Control output Protection circuit Protection Material Cable
5m 0.1-3.5m Opaque material of Min. Opaque material of Min.60mm 16mm ----------------------Max.20mS DC10-30V10%(Ripple P-P:Max10%) ----------------------Selectable Litht ON/D or Dark ON by slide swith Relay contact output Capacity:30VDC 3A Resistive load, 250VAC 3A Resistive load Contact orde:1C ----------------------IP50 (IEC Standard) Case:ABSLens cover:AcrylLens:Acryl 6.0mm, 5P, Length:2m(Emitter of through-beam type :6.0mm,2P,length:2m)
Adjustable by VR
*(*1)Detecting xdistance and detecting target of retroreflective type is the value for MS-2 and detecting distance shows available setting range of MS-2, It is able to detect the target at under 0.1m.
Detecting distance Detecting target Hysterisis Response time Power supply Sensitivity Operating Control output Protection circuit Protection Material Cable
5m 0.1-3.5m Opaque material of Min. Opaque material of Min.60mm 16mm ----------------------Max.20mS 90 to 250VAC10%50/60Hz, Ripple ----------------------Selectable Litht ON/D or Dark ON by slide swith Relay contact output Capacity:30VDC 3A Resistive load, 250VAC 3A Resistive load Contact orde:1C ----------------------IP50 (IEC Standard) Case:ABSLens cover:AcrylLens:Acryl 6.0mm, 5P, Length:2m(Emitter of through-beam type :6.0mm,2P,length:2m)
Adjustable by VR
http://www.greegoo.com
*(*1)Detecting xdistance and detecting target of retroreflective type is the value for MS-2 and detecting distance shows available setting range of MS-2, It is able to detect the target at under 0.1m.
Sensors
Photoelectric Switch
Photo Sensor (G50 Series)
Type Free voltage, Relay contact output
G50-4C5JC Through beam W18xH50xL50mm G50-4B4JC Retroreflective(*1) G50-4A30JC Diffuse
1-
Model Dimensions
Detecting distance Detecting target Hysterisis Response time Power supply Sensitivity Operating Control output Protection circuit Protection Material Cable
5m 0.1-3.5m Opaque material of Min. Opaque material of Min.60mm 16mm ----------------------Max.20mS 24 to 240VAC10%50/60Hz, 24 to 240VAC10%(Ripple P-P: Max10%) ----------------------Selectable Litht ON/D or Dark ON by slide swith Relay contact output Capacity:30VDC 3A Resistive load, 250VAC 3A Resistive load Contact orde:1C ----------------------IP54 (IEC Standard) Case:ABSLens cover:AcrylLens:Acryl 6.0mm, 5P, Length:2m(Emitter of through-beam type :6.0mm,2P,length:2m)
Adjustable by VR
*(*1)Detecting xdistance and detecting target of retroreflective type is the value for MS-2 and detecting distance shows available setting range of MS-2, It is able to detect the target at under 0.1m.
Detecting distance Detecting target Hysterisis Response time Power supply Sensitivity Operating Control output Self-diagnostic Outpue Timer function Protection
http://www.greegoo.com
7m 0.1-3.5m Opaque material of Min. Opaque material of Min.60mm 15mm ----------------------Max.20mS 100 to 30VDC10%(Ripple P-P:Max10%) ----------------------Selectable Litht ON/D or Dark ON by slide swith Relay contact output Capacity:30VDC 3A Resistive load, 250VAC 3A Resistive load Contact orde:1C Green LED turns on at unstable operation ON Delay,OFF Delay,Selectable one shot delay by slide swith adjustable by VR IP48(IEC Standard) Delay Time:0.1 to 5sec
Adjustable by VR
Sensors
Photoelectric Switch
Photo Sensor (G74 Series)
Type
Model Dimensions
1-
Detecting distance Detecting target Hysterisis Response time Power supply Sensitivity Operating Control output Self-diagnostic Outpue Timer function Protection
7m 0.1-3.5m Opaque material of Min. Opaque material of Min.60mm 15mm ----------------------Max.20mS AC90-250V10%50/60Hz ----------------------Selectable Litht ON/D or Dark ON by slide swith Relay contact output Capacity:30VDC 3A Resistive load, 250VAC 3A Resistive load Contact orde:1C Green LED turns on at unstable operation ON Delay,OFF Delay,Selectable one shot delay by slide swith adjustable by VR IP48(IEC Standard) Delay Time:0.1 to 5sec
Adjustable by VR
Detecting distance Detecting target Hysterisis Response time Power supply Sensitivity Operating Control output Self-diagnostic Outpue Timer function Protection
7m 0.1-3.5m Opaque material of Min. Opaque material of Min.60mm 15mm ----------------------Max.20mS 24 to 240VAC10%50/60Hz, 24 to 240VAC10%(Ripple P-P: Max10%) ----------------------Selectable Litht ON/D or Dark ON by slide swith Relay contact output Capacity:30VDC 3A Resistive load, 250VAC 3A Resistive load Contact orde:1C Green LED turns on at unstable operation ON Delay,OFF Delay,Selectable one shot delay by slide swith adjustable by VR IP54(IEC Standard) Delay Time:0.1 to 5sec
Adjustable by VR
http://www.greegoo.com
Sensors
Photoelectric Switch
Photo Sensor (BEN Series)
Type Free voltage, Relay contact output
BEN10M-TDR Through beam W18xH50xL50mm BEN5M-MDR Retroreflective(*1) BEN500-DDR Diffuse
1-
Model Dimensions
Detecting distance Detecting target Hysterisis Response time Power supply Sensitivity Operating Control output Protection circuit Protection Material Cable
10m 0.1-5m Opaque material of Min. Opaque material of Min.60mm 16mm ----------------------Max.20mS DC10-30V10%50/60Hz ----------------------Selectable Litht ON/D or Dark ON by slide swith Relay contact output Capacity:30VDC 3A Resistive load, 250VAC 3A Resistive load Contact orde:1C ----------------------IP50(IEC Standard) Case:ABSLens cover:AcrylLens:Acryl 6.0mm, 5P, Length:2m(Emitter of through-beam type :6.0mm,2P,length:2m)
Adjustable by VR
*(*1)Detecting xdistance and detecting target of retroreflective type is the value for MS-2 and detecting distance shows available setting range of MS-2, It is able to detect the target at under 0.1m.
Detecting distance Detecting target Hysterisis Response time Power supply Sensitivity Operating Control output Protection circuit Protection Material Cable
http://www.greegoo.com
10m 0.1-5m Opaque material of Min. Opaque material of Min.60mm 16mm ----------------------Max.20mS AC90 to 240VAC10%50/60Hz, Ripple ----------------------Selectable Litht ON/D or Dark ON by slide swith Relay contact output Capacity:30VDC 3A Resistive load, 250VAC 3A Resistive load Contact orde:1C ----------------------IP50(IEC Standard) Case:ABSLens cover:AcrylLens:Acryl 6.0mm, 5P, Length:2m(Emitter of through-beam type :6.0mm,2P,length:2m)
Adjustable by VR
*(*1)Detecting xdistance and detecting target of retroreflective type is the value for MS-2 and detecting distance shows available setting range of MS-2, It is able to detect the target at under 0.1m.
Sensors
Photoelectric Switch
Photo Sensor (BEN Series)
Type
Model Dimensions
1-
Detecting distance Detecting target Hysterisis Response time Power supply Sensitivity Operating Control output Protection circuit Protection Material Cable
10m 0.1-5m Opaque material of Min. Opaque material of Min.60mm 16mm ----------------------Max.20mS 24 to 240VAC10%50/60Hz, 24 to 240VAC10%(Ripple P-P: Max10%) ----------------------Selectable Litht ON/D or Dark ON by slide swith Relay contact output Capacity:30VDC 3A Resistive load, 250VAC 3A Resistive load Contact orde:1C ----------------------IP54(IEC Standard) Case:ABSLens cover:AcrylLens:Acryl 6.0mm, 5P, Length:2m(Emitter of through-beam type :6.0mm,2P,length:2m)
Adjustable by VR
*(*1)Detecting xdistance and detecting target of retroreflective type is the value for MS-2 and detecting distance shows available setting range of MS-2, It is able to detect the target at under 0.1m.
Detecting distance Detecting target Hysterisis Response time Power supply Sensitivity Operating Control output Self-diagnostic Outpue Timer function Protection
15m 0.1-5m Opaque material of Min. Opaque material of Min.60mm 15mm ----------------------Max.20mS 10 to 30VDC10%(Ripple P-P: Max10%) ----------------------Selectable Litht ON/D or Dark ON by slide swith Relay contact output Capacity:30VDC 3A Resistive load, 250VAC 3A Resistive load Contact orde:1C Green LED turns on at unstable operation ON Delay,OFF Delay,Selectable one shot delay by slide swith adjustable by VR IP48(IEC Standard) Delay Time:0.1 to 5sec
Adjustable by VR
http://www.greegoo.com
Sensors
Photoelectric Switch
Photo Sensor (BX Series)
Type Free voltage, Relay contact output
BX15M-TAR Through beam W25xH67xL81mm BX5M-MAR Retroreflective(*1) BX700-DAR Diffuse
1-
Model Dimensions
Detecting distance Detecting target Hysterisis Response time Power supply Sensitivity Operating Control output Self-diagnostic Outpue Timer function Protection
15m 0.1-5m Opaque material of Min. Opaque material of Min.60mm 15mm ----------------------Max.20mS AC90-250V10%50/60Hz ----------------------Selectable Litht ON/D or Dark ON by slide swith Relay contact output Capacity:30VDC 3A Resistive load, 250VAC 3A Resistive load Contact orde:1C Green LED turns on at unstable operation ON Delay,OFF Delay,Selectable one shot delay by slide swith adjustable by VR IP48(IEC Standard) Delay Time:0.1 to 5sec
Adjustable by VR
Detecting distance Detecting target Hysterisis Response time Power supply Sensitivity Operating Control output Self-diagnostic Outpue Timer function Protection
http://www.greegoo.com
15m 0.1-5m Opaque material of Min. Opaque material of Min.60mm 15mm ----------------------Max.20mS 24 to 240VAC10%50/60Hz, 24 to 240VAC10%(Ripple P-P: Max10%) ----------------------Selectable Litht ON/D or Dark ON by slide swith Relay contact output Capacity:30VDC 3A Resistive load, 250VAC 3A Resistive load Contact orde:1C Green LED turns on at unstable operation ON Delay,OFF Delay,Selectable one shot delay by slide swith adjustable by VR IP54(IEC Standard) Delay Time:0.1 to 5sec
Adjustable by VR
Sensor
Proximity Switch Inductive proximity switch (E2E series) anti-omron series
DC 3line type (E2E-XE)
Withstand voltage
Shield Item Voltage Power voltage Standard deteced object Standard detected object Tolerance distance Tolerance frequency *3 Output control (switch capacity)*2 Influence of temperature Influence of voltage Residual voltage Insulation resistance Crust Material Detection surface Cuzn 2.0kHz 0.8kHz 1.5kHz 881mm 12121mm 12121mm Model Detection distance Shield
1-1
M8
Non-shield Shield E2E-X2E 2mm10% E2E-X1R5E E2E-X2ME 1.5mm10% 2mm10%
M12
Non-shield E2E-X5ME 5mm10% Shield E2E-X5E 5mm10%
M18
Non-shield Shield E2E-X10ME E2E-X10E 10mm10% 10mm10%
M30
Non-shield E2E-X18ME 18mm10%
DC12~24V (P-P)fluctuate at 10% less 13mA less magnetic metal 15151mm 18181mm 30301mm 30301mm 54541mm
max 200mA within 10% of detection distance at +23 C in the range of -25~+70oC 15% / 1% (Load current of 200 mA and 2 m long conductor) between the main body and crust of charger PBT
Detecting distance
1.5mm 2mm 5mm 10mm 2mm 5mm 10mm 18mm
Output
NO NO NC NO NC NO NC NO NO NC NO NC NO NC
Item NO.
E2E-X1R5Y1 E2E-X2Y1 *1.2 E2E-X2Y2 E2E-X5Y1 *1.2 E2E-X5Y2 E2E-X10Y1 *1.2 E2E-X10Y2 E2E-X2MY1 E2E-X5MY1 *1.2 E2E-X5MY2 E2E-X10MY1 *1 E2E-X10MY2 E2E-X18MY1 *1
http://www.greegoo.com
E2E-X18MY2
Sensor
Proximity Switch Inductance proximitg switch.(Autonics kovea)
1-2
Type
Model
Appearances & Dimensions Detecting distance Hysteresis Standard target Setting distance Power supply (Allowable operating voltage) Current consumption Response frequency Residual voltage Control output Protection circuit Protection Max.2V 200mA Reverse polarity protection,surge protection circuit,overload & short-circuit protection except PR08,12 series IP67(IEC Standard) 800Hz 881mm(Iron) 0 to 1.05mm 0 to 1.4mm 1.5mm10% 2mm10% 2mm10% 4mm10% 5mm10% 8mm10% 10mm10% 15mm10%
Max.10% of detecting distance 12121mm(Iron) 0 to 2.8mm 18181mm 0 to 3.5mm 25251mm 0 to 5.6mm 30301mm 0 to 7mm 45451mm 0 to 10.5mm
Type
Model
Detecting distance Hysteresis Standard target Setting distance Power supply (Allowable operating voltage) Current consumption
http://www.greegoo.com
2mm10%
4mm10%
5mm10%
8mm10%
10mm10%
15mm10%
Max.10% of detecting distance 12121mm(Iron) 0 to 1.4mm 0 to 2.8mm 18181mm(Iron) 0 to 3.5mm 25251mm(Iron) 0 to 5.6mm 30301mm(Iron) 0 to 7mm 45451mm(Iron) 0 to 10.5mm
DC100-240V(85-264VAC) Max.25mA 20Hz Max.10V 150mA Surge protection circuit IP67(IEC Standard) Greegoo Electric 5.2008 200mA
Sensor
Proximity Switch AC-DC universal approach switch
Structural category
Outward appearance code LM12
1-
Cylinder type
LM18 LM24
Overall dimensions
Rated action installation way AC/DC Working voltage Current output Frequency Working temperature Protection grade Opening Closed
8mm surface LM18-4008A LM18-4008B 20-230V AC/DC 100-300mA 15Hz -25 C --- +70oC IP67
o
Structural category
Outward appearance code
Cylinder type
LM30
Plane type
LM38
Overall dimensions
Rated action installation way AC/DC Working voltage Current output Frequency Working temperature Protection grade Opening Closed
http://www.greegoo.com
100-300mA
Sensor
Proximity Switch Safety explosion-proof proximity switch
1-
NAMUR sensor,also called safety explosion proof proximity switch,is made according to NAMUR and NIN 1923,measured and designed as per chemical industry standard. Structural category Outward appearance code
AM8-3001LB AM8-3002LB
Namur
AM18-3005LB AM18-3008LB
AM12-3002LB AM12-3004LB
AM30-3010LB AM30-3015LB
Sn;(mm) Standard detecting object Q235 steel(mm) Model Embedded Non-embedded Rated voltage Oscillating current/ Stop oscillating current Load resistance Switch frequency,embedded/ non-embedded Shell material Protection level Working environment temperature External wiring diagram
o
Technology parameter
1.5Hz/1kHz
1.5Hz/1kHz
300Hz/200KHz
http://www.greegoo.com
Sensor
Reed Sensor Reed Sensor
1-1
Also called magnetic switch,reed sensor is applicable for position determination of pneumatic and/or hydraulic cylinder and piston pump.It also can be used as limit switch.When the magnetic object approaches,the reed closes and sends out switch signal through magnification.Compared with inductive sensor.it has the following strongpoints:can be installed in metal closely and side by side and detect through metal object.Its detection distance subjects to the intensity of magnetic field of detected object.Reed sensor is not applicable in the occasion of severe vibration.
http://www.greegoo.com