Anda di halaman 1dari 2

Series50RX Specifications Reflectorless Total Stations Series50RXSET2 SET3 SET5 SET6 Specifications Reflectorless Total Stations SET2 SET3

SET5 Model SET2 SET6 Series50RX Specifications SET3 Series50RX Specifications


50RX 50RX 50RX 50RX

50RX 50RX 50RX 50RX SET550RX SET650RX Telescope Fully transiting, coaxial sighting and distance measuring optics Reflectorless Total Stations SET250RXSET350RX30x SET550RXSET650RX SET350RX SET550RXSET650RX ReflectorlessResolving power SET250RXSET350RX / 2.5"50RX Total Stations Model SET2 SET550RX SET650RX Magnification / 26x / 3.5" Telescope Fully transiting, coaxial sighting and distance measuring optics Length: 171mm (6.7in.), Objective aperture: 45mm (1.8in.) (48mm (1.9in.) for EDM), Image: Erect, Others Model SET250RX SET350RX SET550RX Model SET350RX SET550RX SET650RX 30xField of view: 50RX (26m/1,000m), Minimum focus: 1.3m (4.3ft.), Reticle illumination: /53.5" / 2.5"SET2 130' Magnification / Resolving power 26x SET650RX brightness levels Telescope Fully transiting, coaxial sighting distance 45mm (1.8in.) (48mm (1.9in.) for EDM), Image: Erect, Telescope Fully transiting, (6.7in.), Objectiveand distance measuring optics Length: 171mm coaxial sighting andaperture: measuring optics Others Absolute rotary encoder scanning, both circles adopt diametrical detection Angle measurement Magnification / Resolving power 30x30x / 2.5" 2.5" Magnification / Resolving power Field/of view: 130' (26m/1,000m), Minimum focus: 1.3m (4.3ft.), Reticle illumination: 5 / 3.5" 26x 3.5" 26x / brightness levels 1" / 5", 0.0002 / 0.001gon, 0.005 / 0.02mil, selectable Display resolution Length: 171mm (6.7in.), Objective aperture: 45mm (1.8in.) (48mm Length: rotary (6.7in.), Objective aperture: adopt diametrical detection (48mm (1.9in.) for EDM), Image: Erect, Othersmeasurement Absolute171mmencoder scanning, both circles45mm (1.8in.) / 1.5mgon(1.9in.) for EDM), /Image:Erect, AngleOthers (ISO 17123-3:2001) 2" / 0.6mgon / 0.01mil 3" / 1mgon / 0.015mil 5" / 0.025mil 6" 1.9mgon / 0.03mil Accuracy Field0.0002 / 130' (26m/1,000m), Minimum focus: Field5", view: 130' (26m/1,000m), 0.02mil, selectable1.3m (4.3ft.), Reticle illumination: 5 brightnesslevels of of view: 0.001gon, 0.005 / Minimum focus: 1.3m (4.3ft.), Reticle illumination: 5 brightness levels 1" /Provided Display resolution IACS (Independent Angle Calibration System) Absolute rotary encoder scanning, both0.015mil Angle measurement Absolute rotary 0.01mil scanning, both circles adopt diametrical detection AngleMeasurement mode measurement 2" /Clockwise / Counterclockwise,1mgon Hold, Angle input, Repetition / 0.025mil 0.6mgon / encoder 3" / 0 set, / circles adopt diametrical detection 5" / 1.5mgon 6" / 1.9mgon / 0.03mil Accuracy (ISO 17123-3:2001) H 1" / 5", 0.0002 / 0.001gon, 0.005 / 0.02mil, selectable Display resolution Calibration System) 1" /Zenith 5", 0.0002 / 0.001gon, 0.005 / 0.02mil, selectable Display resolution Angle Provided 0 / Horizontal 0 / Horizontal 0 / Slope in % IACS (Independent V 2" / 0.6mgon / 3" / 1mgon / 0.015mil 6" 1.9mgon Accuracy (ISO 17123-3:2001) 2" /Dual-axis liquid 0.01mil 3" 0 1mgon / 0.015mil 0.6mgon / 0.01mil 5"5" 1.5mgon / 0.025mil / / 1.5mgon / 0.025mil 6" / / available / 0.03mil Accuracy (ISO 17123-3:2001) /H Measurement mode tilt sensor, / set, Hold, Angle (111mgon) / Collimation compensation1.9mgon / 0.03mil Dual-axis compensator Collimation compensation Clockwise / Counterclockwise,working range: 6' input, Repetition Provided (Independent Provided - IACS IACSmotion screws Calibration System) (Independent AngleAngle Calibration System) Zenith 0 / Horizontal 0 / Horizontal 0 / Slope in % V 2-speed motion 1-speed motion Fine Clockwise / 0 set, Hold, Angle input, Repetition Measurement mode H Clockwise liquidCounterclockwise,set, Hold, Angle input,laser diode (690nm) Measurement mode Dual-axis / Counterclockwise, 0 tilt phase working range: 6' (111mgon) / Collimation compensation available Dual-axis compensator / Collimation compensation Modulated laser,sensor, comparison method with red Repetition Distance measurement H Zenith Horizontal 0 0 / Horizontal 0 / Slope % V Zenith 0 / 0 / HorizontalClass 3R / Prism/sheet in in % V 2-speed motion mode: / Horizontal 0 / Slopemode: Class 1 1-speed motion Fine motion screws Reflectorless Laser output*1 Dual-axis liquid sensor, working range: / Collimation compensation available Dual-axis compensator / Collimation compensation Dual-axis liquid tilt tilt sensor, working range: 6' (111mgon) Collimation compensation available Dual-axis compensator Modulated400m (1.0 to comparison method6' (111mgon) / (690nm) with red laser diode Distance measurement / Collimation compensation 0.3 to laser, phase 1,310ft.) Measuring range Reflectorless*3 2-speed motion Fine motion screws 2-speed motion to 500m (4.3 / 1-speed motion 1-speed motion Fine motion screws RS90N-K: 1.3 1,640ft.), RS50N-K: Class 1 Reflectorless mode: Class 3R toPrism/sheet mode: 1.3 to 300m (4.3 to 980ft.), RS10N-K: 1.3 to 100m (4.3 to 320ft.) Laser(under average conditions*2) Reflective sheet*4 output*1 Modulated laser, phase comparison method with red laser diode (690nm) Distance measurement Modulated laser, 2,500m (8,200ft.), method with red laser diode (690nm) Distance measurement Mini prisms 0.3 CP01: 1.3(1.0phase comparison OR1PA: 1.3 to 500m (1,640ft.) to 400m to to 1,310ft.) Measuring range *1 Reflectorless*3 Reflectorless mode: Class 3R / Prism/sheet mode: Class 1 Laser output Reflectorless mode: Class13,120ft.) / Under mode: Class 1 *5(4.3 to 980ft.), RS10N-K: 1.3 to 100m (4.3 to 320ft.) Laser output*1 conditions*2) Reflective sheet*4 1.3 to 4,000m (4.3 to to / Prism/sheet good conditions One AP prism RS90N-K: 1.3 to 500m (4.3 3R 1,640ft.), RS50N-K: 1.3 to 300m : 1.3 to 5,000m (16,400ft.) (under average *3 0.3 to 400m (1.0 to 1,310ft.) Measuring range Reflectorless 0.3 to 5,000m (16,400ft.) / UnderOR1PA: 1.3 to 500m (1,640ft.) to 1.3 to 2,500m (8,200ft.), good conditions*5: to 6,000m (19,680ft.) Measuring range Reflectorless*3prisms CP01: 400m (1.0 to 1,310ft.) Mini Three AP prisms (under average conditions*2) Reflective sheet*4 RS90N-K: 1.3 to 500m (4.3 to 1,640ft.), RS50N-K: 1.3 to 300m (4.3 to 980ft.), RS10N-K: 1.3 to 100m (4.3 to 320ft.) RS90N-K: Foot,(4.3 + 13,120ft.) / Under good conditions*5: (4.3 to 980ft.), (16,400ft.) Unit (under average conditions*2) Reflective sheet*4 1.3 Meter, 1.3 to Footto (4.3 toUS foot, US foot + inch to 300m 1.3 to 5,000m RS10N-K: 1.3 to 100m (4.3 to 320ft.) to 4,000m 500m inch, 1,640ft.), RS50N-K: 1.3 One AP prism Mini prisms CP01: 1.3 to 2,500m (8,200ft.), OR1PA: 1.3 to 500m (1,640ft.) Display resolution Fine /Rapid: 0.001m Under good conditions*5: to 6,000m (19,680ft.) CP01: 1.3 to 2,500m (8,200ft.), OR1PA: 1.3 to 500m (1,640ft.) / 1/2in. Mini prisms Three AP prisms to 5,000m (16,400ft.) / / 0.01ft. / 1/8in. Tracking: 0.01m /*50.1ft. One AP prism 1.3 to 4,000m (4.3 to 13,120ft.) / Under good conditions : 1.3 to 5,000m (16,400ft.) *2 *3 2ppm x foot, over 200 inch 1.3 0.34,000m (4.3 inch, USD) mm, Under good conditions10ppm x D) mm, over 350 to 400m: (10 + 10ppm x D) mm to to 200m: (3 +to 13,120ft.) US foot +to 350m: (5 + *5: 1.3 to 5,000m One Reflectorless AP prism Unit Accuracy Meter, 5,000m (16,400ft.) / Under /good conditions*5: to 6,000m (19,680ft.) (16,400ft.) Three AP prisms to Foot, Foot + *5 (3 + 2ppm x D) mm Reflective sheet*4 (ISO 17123-4:2001) Three AP prisms to 5,000m (16,400ft.) / Under 1/8in. Tracking::0.01m / 0.1ft. / 1/2in. to Display resolution Fine /Rapid: 0.001m + 0.01ft. /good conditions inch 6,000m (19,680ft.) Unit Meter, Foot, Foot / inch, US foot, US foot + (2 Foot, (3 + 2ppm 2ppm AP/CP prism Unit Meter,200m: FootD) mmx D) mm, over 200 to 350m: (5 + 10ppm x D) mm, over 350 to 400m: (10 + 10ppm x D) mm + inch, + inch Reflectorless*3 0.3 to +/Rapid:x0.001m / US foot, US foot Tracking: 0.01m / 0.1ft. / 1/2in. Accuracy*2 resolution Display Fine 0.01ft. / 1/8in. Fine (single repeat / Rapid (single 0.01m / Tracking 1/2in. Measuring mode Display resolution Fine 2ppm D)/ mm / 0.01ft. / 1/8in. (3 +/Rapid:x0.001m 2ppmaverage), overTracking: / repeat), 0.1ft. x/D) mm, over 350 to 400m: (10 + 10ppm x D) mm Reflective sheet*4 (ISO 17123-4:2001) Reflectorless*3 0.3 to 200m: (3 + x D) mm, 200 to 350m: (5 + 10ppm Accuracy*2 Fine: 0.9s (initial Measuring time*6 Reflectorless*3 0.3 to 200m: D) D) mmx D) mm, over 200 to 350m: (5 + 10ppm x D) (initial 1.4s) + 2ppm Accuracy*217123-4:2001) (2 + 2ppm x(3 x mm 1.7s), Rapid: 0.7s (initial 1.4s), Tracking: 0.3s mm, over 350 to 400m: (10 + 10ppm x D) mm AP/CP prism sheet*4 Reflective (3 + 2ppm (ISO *4 3 x 5mm@2m, 6.5 Height x Width Measuring beam spot size (3 + 2ppm / repeat x 7mm@10m, 19 x 14mm@40m Reflective sheet (ISO 17123-4:2001) Fine (singlex D) mm / average), Rapid (single / repeat), Tracking Measuring mode (2 + 2ppm x D) mm AP/CP prism .12 x .2in.@6.6ft., in reflectorless mode (2 + 0.9s x D)/ mm .26 x .28in.@33ft., .75 x .55in.@131ft.0.3s (initial 1.4s) AP/CP prism Fine: 2ppm(initial repeat / average), Rapid (single / Tracking:Tracking Measuring time*6 Fine (single 1.7s), Rapid: 0.7s (initial 1.4s), repeat), Measuring mode Earth curvature &/refraction (K=0.142/0.20/none) / Sea level correction / Scale factor (0.5 to 2.0) Corrections Fine5mm@2m, 6.5 x 1.7s), Rapid: 0.7s (single 1.4s), Tracking: 0.3s (initial 1.4s) (single / (initial average), Rapid 14mm@40m Measuring mode spot size *6 3 x Fine: 0.9s repeat 7mm@10m, 19 x (initial / repeat), Tracking Height x Width beam Measuring time Interface *6 Fine: 0.9s (initial 1.7s), 7mm@10m, 19 x 14mm@40m .12 3 x 5mm@2m, 6.5 x Rapid: 0.7s (initialx1.4s), Tracking: 0.3s (initial 1.4s) x .2in.@6.6ft., .26 x .28in.@33ft., .75 .55in.@131ft. Measuring timemode spot size Height x Width in reflectorless and Data management Measuring beam Display / Keyboard 3 x Graphic LCD,& refraction.28in.@33ft., .75 x .55in.@131ft. / Alphanumeric keyboard, 27 keys with backlight 5mm@2m, 192 x 80 dots, backlight, contrast adjustment Height x Width Measuring beam spot size .12 x .2in.@6.6ft., .26 x (K=0.142/0.20/none) / in reflectorless mode Earth curvature6.5 x 7mm@10m, 19 x 14mm@40m Sea level correction / Scale factor (0.5 to 2.0) Corrections On one face Control panel location .12 On both faces .26 x .28in.@33ft., .75 x .55in.@131ft. level correction / Scale factor (0.5 to 2.0) x .2in.@6.6ft., in reflectorless mode Interface and Data management Earth curvature & refraction (K=0.142/0.20/none) / Sea Corrections Approx. 10,000 points Data storage Internal memory Earth curvature & refraction backlight, contrast adjustment / correction / Scale factor (0.5 to with Corrections Graphic LCD, 192 x 80 dots, (K=0.142/0.20/none) / Sea levelAlphanumeric keyboard, 27 keys 2.0) backlight Display / Keyboard Data management Interface and SD card and SDHC card (max. 4GB) / USB flash memory (max. 4GB) Plug-in memory device Interface and/ location Graphic LCD, 192 x 80 dots, backlight, contrast adjustment / Alphanumeric keyboard, onekeys with backlight Display Keyboard On both faces On 27 face Control panel Data management Serial RS-232C (baud rate: 1,200 to 38,400bps) Interface Graphic 10,000 points Display / Keyboard On both faces On keys with backlight Approx. LCD, 192 x 80 dots, backlight, contrast adjustment / Alphanumeric keyboard, 27one face Data Control panel location Internal memory storage Bluetooth Class 2, Ver.1.2. / SFX data transfer via Bluetooth connection with a cellular phone supporting GPRS Bluetooth modem (option)*7 / SFX data transfer On card faces On one face Control panel location Approx. SDHC card (max. 4GB) / USB flash memory (max. 4GB) Data storage Internal memory SD both and10,000 points Plug-in memory device General Approx. 10,000 points card 1,200 to 38,400bps) Data storage Internal memory SD card and SDHC Plug-in memory device Serial RS-232C (baud rate: (max. 4GB) / USB flash memory (max. 4GB) Interface Coaxial red laser using EDM beam Laser-pointer*8 Serial Interface *8 SD card and SDHC (baud(max. 1,200 to 38,400bps) card rate: 4GB) USB flash memory (max. 4GB) with a cellular phone supporting Bluetooth RS-232C Ver.1.2. / Red LED / transfer Operating range: 1.3 to 150m (4.3 to 490ft.), Class 1 LED GPRS Bluetooth modem (option)*7 / Plug-in memory device SFX data transfer Green Class 2, LED (524nm) and SFX data (626nm), via Bluetooth connection Guide light Bluetooth Class 2, rate: 1,200 to 38,400bps) Bluetooth modem (option)*7 / SFX data transfer Serial RS-232C (baud Ver.1.2. / SFX data transfer via Bluetooth connection with a cellular phone supporting GPRS Interface General 30" / 2mm 40" / 2mm Plate level Levels General Bluetooth Class 2, Ver.1.2. / beam SFX data transfer via Bluetooth connection with a cellular phone Bluetooth modem (option)*7 / SFX data transfer Coaxial red display range: 6' (inner circle) , Digital display range: 6'30" / Circular level: 10' /supporting GPRS Laser-pointer*8 Graphic laser using EDM 2mm Graphic / Circular *8 Coaxial (524nm) using EDM beam red laser and Red LED (626nm), Operating range: 1.3 to 150m (4.3 to 490ft.), Class 1 LED Laser-pointer*8 General Green LED diode (635nm10nm), Beam accuracy: <1.0mm@1.3m, Class 2 laser product GuideLaser plummet (option) light Red laser = *8 *8 Guide light Coaxial red laser using and beam Laser-pointer 30" Green LED (524nm) EDM Red LED (626nm), Operating range: 1.3 to 150m (4.3 to 490ft.), Class 1 LED / 2mm 40" / 2mm Plate level Levels Magnification: 3x, Minimum focus: 0.3m (11.8in.) from tribrach bottom Optical plummet 30" 2mm 40" / 2mm Plate level Green LED (524nm) and Red LED circle) , Digital display GuideLevels light*8 Graphic /display range: 6' / Detachable tribrach (WA200)range: 6'30" / Circular level: 10'Class 1 LED Graphic / Circular IP66 (IEC 60529:2001) (inner (626nm), Operating range: 1.3 to 150m (4.3 to 490ft.), / 2mm Dust and water protection / Tribrach Circular 30" -20 to diode (635nm10nm), Beam accuracy: <1.0mm@1.3m, Class 2 laser product 2mm / 2mm 40" level Levelsplummet (option) RedGraphic display range: 6' (inner circle) , Digital display range: 6'30" / Circular level:/10' / 2mm laser +50C (-4 to +122F) LaserOperating temperature PlateGraphic / models = Standard Red laser diode (635nm10nm), Beam accuracy: <1.0mm@1.3m, Class 2 laser product Laser plummet (option) Graphic / Circular = Graphic to +60C (-4 to 6' (inner circle) (11.8in.) from range: bottom *9 Optical plummet High Temperature modelsMagnification: 3x, Minimum focus: 0.3m , Digital displaytribrach 6'30" / Circular level: 10' / 2mm -20 display range: +140F)*10 3x, 0.3m (11.8in.) from tribrach bottom *9 RedMagnification:(-22 Minimum focus: tribrach (WA200) LaserOptical plummet plummet protection / Tribrach Temperature modelsIP66laser diode (635nm10nm), Beam accuracy: <1.0mm@1.3m, Class 2 laser product = (IEC +50C Dust and water (option) -30 to 60529:2001) /+122F) to Detachable Low IP66 (IEC 3x, Minimum Detachable (11.8in.) from tribrach bottom Dust and water protection / Tribrach Magnification:60529:2001) / focus: 0.3mtribrach (WA200) Optical plummet -20 to +50C (-4 to +122F) Standard models Operating with handle & battery W166 x D173 x H341mm Size temperature W166 +50C x H341mm *10 (W6.5 x tribrach (WA200) -20 to 60529:2001) / Detachable D7.1 x H13.5in.) Standard models *9 IP66 (IEC x D180 (-4 to +122F) Operating temperature Tribrach Dust and water protection / High Temperature models (W6.5 x D6.8 x H13.5in.) -20 to +60C (-4 to +140F) *10 *9 High models to +60C (-4 to +140F) Standard Temperature models-20 -20+50C (-22 +122F) Operating temperature to +50C (-4 to Low Temperature models*9 -30 5.6kg (12.3 lb.)to +122F) 5.5kg (12.1 lb.) 5.4kg (11.9 lb.) Weight with Standard/High Temp. models *9 -30 to +50C (-22 to +122F) Low Temperature models handle & battery Temperature models*9 -20 to +60C (-4 to W166 x D173 x H341mm Size with handle & battery High Low Temperature models 5.6kg (12.3 lb.) +140F)*10 W166 x D173 x H341mm Size with handle & battery W166 x D180 x H341mm (W6.5 x D7.1 x H13.5in.) to +50C (-22 H341mm (W6.5 x D7.1 x H13.5in.) Low Temperature models*9 -30 W166 x D180 x to +122F) (W6.5 x D6.8 x H13.5in.) Power supply (W6.5 x D6.8 x H13.5in.) W166 x model Size with handle & battery Standard/High detachable battery Li-ion rechargeable battery (7.2V,(12.1 lb.) batteries included in 2", 3", 5" models, one for 6" D173 x H341mm Battery BDC46B Temp. models 5.6kg (12.3 lb.) 5.5kg 2.4Ah), two 5.4kg (11.9 lb.) Weight with W166 x D180 x H341mm (W6.5 x D7.1 x H13.5in.) 5.5kg (12.1 lb.) 5.4kg (11.9 x H13.5in.) Weight with Standard/High Temp. models 5.6kg (12.3 lb.) (W6.5 x D6.8lb.) handle & battery Operating time Low BDC46B detachable battery Approx. 8.5 hours, approx. 12.5 hours in angle measurement only Temperature models 5.6kg (12.3 lb.) handle & battery*11 Low Temperature models 5.6kg (12.3 lb.) (distance External Temp. models 5.6kg (12.3 lb.) 5.5kg (12.1 lb.) 5.4kg (11.9 lb.) Weight with Standard/High battery (option)*12 BDC60: approx. 25 hours, BDC61: approx. 50 hours Power supply & angle) Power supply *12 handle & battery External power 6.0 to 8.0V DC Low Input voltage models 5.6kg rechargeable battery (7.2V, 2.4Ah), two batteries included in 2", 3", 5" models, one for 6" model Temperature battery Li-ion (12.3 lb.) Battery BDC46B detachable Battery BDC46B detachable battery Li-ion rechargeable battery (7.2V, 2.4Ah), two batteries included in 2", 3", 5" models, one for 6" model 5/10/15/30 Automatic Power supply power Operating time time cut-off BDC46B detachable battery Approx. 8.5 8.5 minutes after operation / none, selectable hours, approx. 12.5 hours in angle measurement only Operating *11 BDC46B detachable battery Approx. hours, approx. 12.5 hours in angle measurement only Software Li-ion rechargeable Battery BDC46B battery (option)*12 BDC60: approx. 25 hours, BDC61: approx. batteries included in 2", 3", 5" models, one for 6" model (distance & angle) External detachable battery *12 BDC60: approx.battery (7.2V, 2.4Ah), two5050 hours (distance & angle)*11 25 hours, BDC61: approx. hours External battery (option) Resection, 3D Onboard programs Operating time BDC46B detachable battery Approx. 8.5 DC Coordinate Measurement, Setting-out, Set-out Line, Set-out Arc, Point Projection, Intersection, Input voltage External power*12 *12 6.0 6.08.0V hours, approx. 12.5 hours in angle measurement only to to 8.0V DC Input voltage External power *11 Traverse Adjustment, Single-distance offset, hours Two-distance offset (hidden point), Offset-angle, *12 (distance & angle) BDC60: approx.minutes after operationnone, selectable 5/10/15/30 minuteshours, operationapprox. 50 selectable Automatic power cut-off 5/10/15/30 25 after BDC61: / REM (Remote Elevation Measurement), Area Calculation Automatic power cut-off External battery (option) MLM (Missing Line Measurement), / none, Input voltage External power*12 6.0 to 8.0V DC Software Software *1 IEC60825-1 cut-off 5/10/15/30 minutes after Measurement, Setting-out, Set-out Line, Set-outweak scintillation. *3 With Kodak Gray Card Automatic power Amd.2:2001 / FDA CDRH 21 CFR Part 1040.10 and 11 *2 Average conditions: Slight haze, visibility about 20km (12 Set-out Line, Set-out Arc, Point Projection,Intersection, Resection, 3D 3D Coordinate Measurement, Setting-out, miles), sunny periods, Arc, Point Projection, Intersection, Onboard programs Resection, Coordinate operation / none, selectable Onboard programs White Side (90% reflective). When brightness on measured surface is 30,000 lx. or less. Reflectorless range/accuracy may vary according to measuring objects, observation situations and environmental conditions. Software Traverse Adjustment, Single-distance offset, Two-distance offset (hidden point), Offset-angle, Traverse Adjustment, target. Measuring offset, Two-distance -30 to (hidden to -4F) with Low Temperature models: *4 When the measuring beam's incidence angle is within 30 in relation to the reflective sheet Single-distance range in temperatures of offset -20C (-22point), Offset-angle, (Missing Coordinate 60m (4.3 REM (Remote conditions: Measurement), Area Calculation Resection, 3D Line Measurement), to 190ft.) *5 GoodElevation No haze, visibility about 40km (25Projection, Intersection, Onboard programsto 300m (4.3 to 980ft.), RS50N-K: 1.3 to 180m MLMto 590ft.), RS10N-K: 1.3 to Measurement, Setting-out, Set-outMeasurement),Arc, Calculation overcast, no scintillation. RS90N-K: 1.3 (4.3 MLM (Missing Line Measurement), REM (Remote Elevation Line, Set-outArea Point miles),
09 TOPCON2009 TOPCON CORPORATION. All rights reserved. SOKKIA is aof SOKKIAof SOKKIACO., LTD. of SOKKIA TOPCON CO., LTD. 2009CORPORATION. 2009 TOPCON CORPORATION. All rights a trademark TOPCONtrademark CO., LTD. All rights reserved. reserved. a trademark trademark of SOKKIA TOPCON TOPCON CORPORATION. All rightsSOKKIA is SOKKIA is reserved. SOKKIA is a TOPCON CO., LTD.

50RX

50RX

Series50RX Series50RX Reflectorless Total Stations Series50RX Series50RX Reflectorless Total Stations

Ultimate in Reliability Ultimate in Reliability Ultimate in Reliability Ultimate in Reliability


All Weather - All Temperature - Consistent Speed All Weather - All Temperature - Consistent Speed All Weather --All Temperature - - Consistent Speed All Weather All Temperature Consistent Speed

Reflectorless Total Stations Reflectorless Total Stations

Traverse Adjustment, Single-distance offset, Two-distance offset (hidden point), *7 Usage approval of Bluetooth *6 Typical, under good conditions. Reflectorless measurement time may vary according to measuring objects, observation situations and environmental conditions.Offset-angle, *1 IEC60825-1 Amd.2:2001 / FDA/CDRHCDRH 21 Part 1040.10 and 11 *2 Average conditions: Slight haze, visibility about 20km (12 miles), sunny periods, weak scintillation. *3 With Kodak Gray Card 21 *1 IEC60825-1 Amd.2:2001 accordingCFRcountry. Please consult your*2 Average conditions: Slight haze, visibility about 20km laser-pointer and the guide weak do not work simultaneously. Gray Card wireless technology varies FDA to CFR Part 1040.10 and 11 (Missing advance. *8 The (12 miles), sunny periods, light scintillation. *3 With Kodak MLM local Sokkia office or representative inmay vary according to measuring objects, observation situations and Measurement), REM may vary according White Side (90% reflective). When When brightness on measured surface is 30,000 lx. or LineReflectorless range/accuracy (Remote Elevation Measurement), Area Calculation environmental conditions. Reflectorless range/accuracy White Side (90% reflective). brightness on measured surface is 30,000 lx. or less.less. *9 Low Temperature models and High Temperature Models are available on built-to-order basis. *10 The instrument should be kept to measuring objects,at over +50C (+122F). environmental conditions. from direct sunlight observation situations and *4 When the measuring beam's incidence angleangle is within in relation to the reflective sheet target. Measuring range in temperatures of of -30 to -20C (-22 to -4F) with Low Temperaturemodels: *4 When the measuring beam's incidence is within 30 30 (77F). *12 Applicable to 2" model and Low Temperature in temperatures -30 to -20C (-22 to -4F) with Low Temperature models: in relation to the reflective sheet target. Measuring range models only. *11 Single distance measurement every 30 Part 1040.10 and *1 IEC60825-1 Amd.2:2001 / FDA CDRH 21 CFR seconds at 25C 11 *2 Average conditions: Slight haze, visibility about 20km (12 miles), sunny periods, weak scintillation. *3 With Kodak Gray Card RS90N-K: 1.3 to 1.3 to 300m (4.3 to 980ft.), RS50N-K: 1.3 to 180m (4.3 to 590ft.), RS10N-K: to 60m (4.3 to 190ft.) *5 *5 Good conditions: No haze, visibility about 40km (25 miles), overcast,no scintillation. RS90N-K: 300m (4.3 to 980ft.), RS50N-K: 1.3 to 180m (4.3 to 590ft.), RS10N-K: 1.3 1.3 to 60m (4.3 to 190ft.) Good conditions: No haze, visibility about 40km (25 miles), overcast, no scintillation. White Side (90% reflective). When brightness on measured surface is 30,000 lx. or less. Reflectorless range/accuracy may vary according to measuring objects, observation situations and environmental conditions. *6 Typical, good good conditions. Reflectorless measurement may vary according to measuring objects, observation situations and environmental conditions. *7 Usage approval of Bluetooth *6 Typical, under under conditions. Reflectorless measurement time time may vary according to measuring objects, observation situations and environmental conditions. *7 Usage approval ofBluetooth *4 When the measuring beam's incidence angle is within 30 in relation to the reflective sheet target. Measuring range in temperatures of -30 to -20C (-22 to -4F) with Low Temperature models: wireless technology according to country. Please consult your local Sokkia office or or representative in advance. The laser-pointer and the guide light do not work simultaneously. wireless technology variesvaries according to country. Please consult your local Sokkia officerepresentative in advance. *8 *8 The laser-pointer and the guide light do not work simultaneously. RS90N-K: 1.3 to 300m (4.3 to 980ft.), RS50N-K: 1.3 to 180m (4.3 to 590ft.), RS10N-K: 1.3 to 60m (4.3 to 190ft.) *5 Good conditions: No haze, visibility about 40km (25 miles), overcast, no scintillation. *9 Low Temperature models and High Temperature Models are available on built-to-order basis. The instrument should be kept from direct sunlight at over +50C (+122F). *9 Low Temperature models and High Temperature Models are available on built-to-order basis. *10*10 The instrument should be kept from direct sunlight at over +50C (+122F). *6 Typical, under good conditions. Reflectorless measurement time may vary according to measuring objects, observation situations and environmental conditions. *7 Usage approval of Bluetooth *11 distance measurement every 30 seconds at 25C (77F). *12 Applicable to 2" 2" model Low Temperature models only. *11 Single Single distance measurement every 30 seconds at 25C (77F). *12 Applicable tomodel andand Low Temperature models only. wireless technology varies according to country. Please consult your local Sokkia office or representative in advance. *8 The laser-pointer and the guide light do not work simultaneously. *9 Low Temperature models and High Temperature Models are available on built-to-order basis. *10 The instrument should be kept from direct sunlight at over +50C (+122F). 5 *11 Single distance measurement every 30 seconds at 25C (77F). *12 Applicable to 2" model and Low Temperature models only. Product names mentioned in this brochure are trademarks of their respective holders. 3R The Bluetooth word mark and logos are registered trademarks of Bluetooth SIG, Inc.

Product colors in this brochure may vary slightly from those of actual products owing to limitations of the printing process. Designs and specications are subject to change without notice.

Product names mentioned in this brochure are trademarks of their respective holders. Product names mentioned in this brochure are trademarks of their respective holders. The Bluetooth word mark and logos are registered trademarks of Bluetooth SIG, Inc. The Bluetooth word mark and logos are registered trademarks of Bluetooth SIG, Inc. Product colors in this brochure may vary slightly from those of actual products owing to limitations of the printing process. Product colors in this brochure may vary slightly from those of actual products owing to limitations of the printing process. Designs and specications are subject to change without notice. Designs names mentioned in this brochure are trademarks of their respective holders. Product and specications are subject to change without notice.

www.sokkia.co.jp

55 3R 3R 5 3R

75-1, HASUNUMA-CHO, ITABASHI-KU, TOKYO, 174-8580 JAPAN

www.sokkia.co.jp www.sokkia.co.jp 75-1, HASUNUMA-CHO, ITABASHI-KU, TOKYO, 174-8580 JAPAN 75-1, HASUNUMA-CHO, ITABASHI-KU, TOKYO, 174-8580 JAPAN www.sokkia.co.jp
75-1, 2009 12-1 P-49-1 GE HASUNUMA-CHO, ITABASHI-KU, TOKYO, 174-8580 JAPAN
2009 12-1 P-49-1 GE 2009 12-1 P-49-1 GE

The Bluetooth word mark and logos are registered trademarks of Bluetooth SIG, Inc. Product colors in this brochure may vary slightly from those of actual products owing to limitations of the printing process. Designs and specications are subject to change without notice.

Challenging Environments Measure the the Dimensions of Reliability Challenging Environments Measure the Dimensions of Reliability Challenging Environments Measure Dimensions of Reliability
The The The Series50RX operates or frost,or frost, in sandsnow, in powder dustdust driving rainrain with unprecedented dependability. Series50RX operates in heatheatheatfrost, in sand or or snow, in powder driving rain withwith unprecedented dependability. Series50RX operates in in or in sand or snow, in powder dust or or or driving unprecedented dependability. Enhanced RED-tech II EDMEDM consistently measures to a tovariety of objects objects without downtime. Enhanced RED-tech II consistently measures to a wide a wide variety of without downtime. Enhanced RED-tech II EDM consistently measures wide variety of objects without downtime.
SF14 SF14 SF14 Wireless keyboard keyboard keyboard Wireless Wireless

+60C (+140F) +60C (+140F) +60C (+140F)

Environmentally Durable Durable Environmentally Durable Environmentally

Enhanced RED-tech II EDMEDMEDM Enhanced RED-tech II II Enhanced RED-tech

World-proven, Time-tested AngleAngleAngle Reading System World-proven, Time-tested Reading System World-proven, Time-tested Reading System
Sokkias innovative absolute encoderencoder systemsystem provides unsurpassed, Sokkias innovative absolute system provides unsurpassed, Sokkias innovative absolute encoder provides unsurpassed, extra long-term reliability that reliability that has been proven in all worksite extra long-term reliability that has been proven in all worksite extra long-term has been proven in all worksite conditions across across across thesince its introduction in 2002. 2002. conditions the globe since itsglobe since its introduction in conditions the globe introduction in 2002.
Extremely simplified opticalsimplifiedand mechanical structure maximizes Extremely simplified optical optical structure maximizes Extremely and mechanical and mechanical structure maximizes reliabilityreliabilitythe harshestharshestharshest environmental conditions. even inreliability the environmental conditions. even in even in the environmental conditions. Advanced codingAdvancedand digital processing technologies have given the Advanced coding coding and digital processing technologies have given the and digital processing technologies have given the Series50RX the capability to automatically detect and correct misreading Series50RX the capability to automatically detect and correct misreading Series50RX the capability to automatically detect and correct misreading of encoder encoder encoder patterns. of patterns.patterns. of The 2 model2 model incorporates IACS (Independent Angle Calibration System) System) The incorporates IACS (Independent Angle CalibrationAngle Calibration The 2 model incorporates IACS (Independent System) for the highest reliabilityreliability yet. for the highest highest reliability yet. for the yet.

The Series50RX total stations offer the industrys the industrys highest FurtherFurtherFurther enhanced RED-tech II EDM The Series50RX total stations offer the industrys highest The Series50RX total stations offer highest enhanced RED-tech II EDM II EDM enhanced RED-tech durability that durability that withstands the severest climates as well as provides pinpoint precision in reflectorless reflectorless durability that withstands the severest climates as well as withstands the severest climates as well as provides pinpoint precision in reflectorless provides pinpoint precision in the harshest workharshest work site conditions. the harshest work site conditions. the site conditions. measurement measurement as well as greater range measurement as well as greater range as well as greater range with consistent measurement measurement speed. with consistent measurement speed. with consistent speed.

MaximumMaximum Reliability in Extreme Maximum Reliability in Extreme Reliability in Extreme Temperatures Temperatures Temperatures

In addition to theadditionstandard and Low Temperature models, In additionstandard and Low Temperature models, In to the to the standard and Low Temperature models, the High Temperature modelsmodelsmodels are also available for use in the High Temperature are also available for use for use in the High Temperature are also available in extreme heat. extreme heat. extreme heat. Temperature Temperature Models Temperature n Highn Highn HighModelsModels
+60C/+140F +60C/+140F+60C/+140F The Series50RX sets a new standardstandardstandardof a use of a total The Series50RX sets a new fornew of a total for total The Series50RX sets a use for use station in extremely highin extremely high temperatures. station in extremely high temperatures. station temperatures.

Quick OperationOperation in All Conditions Quick Operation in All Conditions Quick in All Conditions
Easy-to-use control controlcontrolis clearly clearly viewable both in direct Easy-to-use panel is clearly viewable both in both in direct Easy-to-use panel panel is viewable direct sunlight and in underground construction sites. sites. sites. sunlight and in underground construction sunlight and in underground construction
The LCD The LCDThe LCD display display display automatically maintains automatically maintains automatically maintains optimal contrast contrast contrast and optimal and optimal and visibility visibilitybuilt-ina built-in built-in using a visibility using a using temperature sensor. sensor. sensor. temperature temperature Fully backlit keysFullykeys greatly greatly Fully backlit backlit keys greatly facilitate facilitatefacilitate operation in low operation in low in low operation lighting conditions. lighting conditions. lighting conditions. The SF14 wireless wireless wireless keyboard is optionally3for 2, 3 and 5 models. models. The SF14 keyboardkeyboard is optionally availableavailable models. and 5 The SF14 is optionally available for 2, and 5 for 2, 3

-30C (-22F)(-22F) -30C (-22F) -30C

Dependably operatesoperatesoperates in theup to +60C (+140F). Dependably in the heat theup to +60C (+140F).+60C (+140F). Dependably in of heat of heat of up to Ideal for

-30C/-22F -30C/-22F -30C/-22F +60C/+140F +60C/+140F+60C/+140F Idealin deserts, equatorial regions and tropical reefs. reefs. reefs. use for Idealin deserts, deserts, equatorial and tropical tropical use for use in equatorial regions regions and

Temperature Temperature Models Temperature n Low n Low n LowModelsModels


Ensures operations in freezing freezing freezingas low as -30C/-22F -30C/-22F -30C/-22F Ensures Ensures operations in climatesclimates as low as operations in climates as low as -30C (-22F) . (-22F) .(-22F) . -30C -30C Large Large Large external are availableavailable as options options external external Ni-MH batteriesbatteriesoptions Ni-MH batteries Ni-MH are as are available as for long-term operation in low temperatures. temperatures. for long-term operation in low temperatures. for long-term operation in low

Operating temperature range range range Operating temperature Operating temperature


High-temp Models High-temp Models High-temp Models Standard Models Standard Models Standard Models Low-temp Models Low-temp Models Low-temp Models
-30C (-22F) -20C -30C (-4F) (-22F) -20C 0C -20C 0C -30C (-4F) (-22F) (-4F)(+32F) (+32F) 0C (+32F) +50C +60C +50C +60C +50C +60C (+122F) (+140F) (+122F) (+140F) (+122F) (+140F)

Guide Speeds Up Setting-out Tasks Extended reflectorless measurement measurementincreases work Guide LightLightLight Speeds Up Setting-out Tasks Extended reflectorless measurementincreases work Extended reflectorless range range range increases work Guide Speeds Up Setting-out Tasks efficiency by reducing shift reducing shift locations. efficiency by reducing shift of instrument locations. efficiency by of instrument of instrument locations. Green/Red guide light is built into the into theinto the standard feature. feature.feature. Green/Red guide light is built is built telescope as a standard Green/Red guide light telescope as a telescope as a standard
The a prism a prism a prism can Measures from the from thefrom the industrys shortest (1ft.). Ideal for Ideal for The lateral position oflateral position of can Measures industrys shortest shortest distancedistance(1ft.). (1ft.). Ideal for The lateral position of can Measures industrys distance -30cm -30cm -30cm determined measurements to benchmarks close to the instrumentto the pointsto pointsto points easilybe easilybe easilywidein a wide a wide measurements to benchmarks close to close or to instrument or on be on determined in a determined in measurements to benchmarks the instrument or on range of range ofrange of 1.3490ft.). 490ft.). 490ft.). 1.3 to 150m to 150mto 150m (4.3 to 1.3 (4.3 to (4.3 to the ground in archaeologicalin archaeological survey. the ground in archaeological survey. the ground survey. A specialAflashing pattern is also is also is also special flashing flashing pattern A special pattern perception disability. perception disability. perception disability.
+60C/+140F +60C/+140F+60C/+140F

400m (1,310ft.) (1,310ft.) Reflectorless Range 400m (1,310ft.) Reflectorless Range 400m Reflectorless Range

*High Temperature TemperatureTemperature Low TemperatureTemperaturebuilt-to-orderbuilt-to-order basis. *High Models and Low Temperature ModelsLow available are availableare available on built-to-order basis. *High Models and Models and are Models on Models on basis.

DustDust Dust
tight tight tight

Narrow visible visible laser also used as a is as used aspointer; pointer; Narrow Narrow visible laser beam laser a laser a EDM laser beam is beam is also used Highest ProtectionProtection against Waterand Water preciselypreciselyprecisely measures the point alsopointer; thelaser the EDMthe EDM includedincluded to assist users with color Highest Protection against Dust Dust Water Highest against Dust and and included to assist to assist users with color users with color measures the pointthe point the laserthe laser dot indicates. measures the laser dot indicates. dot indicates.

6666 66

The Series50RX withstands the finest powderpowder dust asdust as The Series50RX withstands the finest finestas The Series50RX withstands the dust powder well as wellhardesthardest drivingdriving rain. The industry-leading IP66 the aswell as the hardest rain. The industry-leading IP66 the driving rain. The industry-leading IP66 protection provides unparalleled reliability in the harshest the harshest protection provides unparalleled reliability in the harshest protection provides unparalleled reliability in work site conditions. conditions. work site conditions. work site n Dust-tight n Dust-tight n Dust-tight
IP6x is the highest grade of grade ofgrade of protectionof solid of solid of solid IP6x is the highest protection against ingress ingress ingress IP6x is the highest protection against against foreign objects. objects. objects. foreign foreign The IEC international IEC international standardaIP6x as a dust-tight The IEC international standardIP6x as defines IP6x as a dust-tight The standard defines defines dust-tight enclosure that does not does notdoes not allow any dust penetration. enclosure that allow any dust any dust penetration. enclosure that allow penetration. commonly seen in construction sites andsites and desert areas. areas. commonly seen in construction desert areas.and desert commonly seen in construction sites

Beam spot size size size Beam spot spot Beam

Distanece Distanece 10m (33ft.) (33ft.) (33ft.) Distanece 10m 10m 40m (130ft.) (130ft.) (130ft.) 40m 40m Spot sizeSpot 6.5 Spot 6.5(.26 x .28in.) x .28in.)x .28in.)14mmx(.75 x .55in.)x .55in.) sizex 7mm x 7mm (.26 19 x 14mmx size 6.5 x 7mm (.26 19 (.75 19.55in.) x 14mm (.75

Security and Data Data Data Management Security and Management Security and Management

-30C/-22F Laser Laser Laser outputautomatically switched 1 specifications 1 specifications Password function function prevents unauthorized use.-30C/-22F output level is automatically switched to Class to Class to specifications Password function preventsprevents unauthorized use.-30C/-22F output level is level is automatically switched 1 Class Password unauthorized use. in prism and reflective sheet modes to sheettosafety. tosafety. safety. in prism prism and reflectivemodes modes ensure in and reflective sheet ensure ensure 10,000-point internal memory memorymemory 10,000-point internal internal 10,000-point

1.7 seconds seconds seconds seconds 1.7 seconds Max.Max.seconds 1.7 Max. 4.2 4.2 4.2

SD/SDHC card SD/SDHC card SD/SDHC card USB memory memorymemory devices USB devices devices USB

With refined refinedrefinedprocessing algorithms, the With digital signal signal processing algorithms, the the An optional built-in Bluetoothbuilt-in Bluetooth for With digital digital signal processing algorithms, An optional optional Bluetoothfor An built-in module module module for Series50RX reduced variation of reflectorless measurement measurement Series50RX reduced variation of reflectorless measurement wireless wirelesswireless a data collector.collector. Series50RX reduced variation of reflectorless connection with connection with a data collector. connection with a data Shuts Shuts Shuts out dust, sand, mud and other fine particlesparticles that are time due to the ranges ranges ranges and types by 30 percent*. out powder dust, sand, mud and other fine particles thatfine that are out powder powder dust, sand, mud and other are time due to the and object types by 30 percent*. 30 percent*. time due to the and object object types by n Water-protection n Water-protection n Water-protection
IPx6 rating means theratingthe instrument is protectedpowerfulpowerfulpowerful IPx6 rating means means the instrument is protected against IPx6 instrument is protected against against water jets fromjets from any direction. water any direction. any direction. water jets from 1.7 seconds secondsseconds initial measurement time. time. 1.7 1.7 typical typical initial measurement typical initial measurement time. 4.2 seconds secondsseconds maximum time beforeare displayed. 4.2 4.2 maximum time before results results are displayed. maximum time before results are displayed.

Built-in Laser Plummet (option) (option) Built-in Laser Plummet (option) Built-in Laser Plummet
Built-inBuilt-inBuilt-in laser plummet allows for quick laser plummet allows for quick quick laser plummet allows for

Consistent, high-speed measurement eliminates operators stress operators stress and setting.setting. Consistent, high-speed measurement eliminates operators stress and Consistent, high-speed measurement eliminates and instrument instrument setting. instrument increases overall increasesproductivity. increases overall overall productivity. productivity. The Series50RX does not allow not does not of heavy rain, dripping water water water The Series50RX does penetration allow penetration of heavy rain, dripping The Series50RX allow penetration of heavy rain, dripping 5 brightness levels brightness levels for optimum visibility. 5 brightness levels for optimum visibility. 5 for optimum visibility. * Compared to the previous models. the previous models. * Compared Compared to models. * to the previous in tunnelsin tunnels and underground sites, and water from sprinklers, etc. and underground sites, and water from sprinklers, etc. sprinklers, etc. in tunnels and underground sites, and water from

Anda mungkin juga menyukai